XEDIA-POS-MIB
The XEDIA-POS-MIB module extends standard SONET MIB capabilities to monitor and manage Packet-over-Sonet (PoS) link performance, error counters, and interface states on Xedia networking devices. It provides vendor-specific objects for tracking physical layer statistics and link status that are not covered by the generic SONET MIB.
Imported Objects
Objects
10 total| Object Name |
|---|
xediaPosMIBThis module defines additional objects for management of PoS links in Xedia devices, above and beyond what is defined in the standard SONET MIB. MODULE-IDENTITY .1.3.6.1.4.1.838.3.39 |
xPosTables OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.39.1 |
xPosInterfaceConfTableThe Xedia POS Interface Configuration Table contains extensions to the POS Interface Configuration Table, one entry per POS interface. SEQUENCE OF XPosInterfaceConfEntry .1.3.6.1.4.1.838.3.39.1.1 |
xPosInterfaceConfEntryAn entry in the Xedia POS Interface Configuration Table. XPosInterfaceConfEntry .1.3.6.1.4.1.838.3.39.1.1.1 |
xPosConfigCrcModeThe configured CRC mode of the interface.rw Enumeration .1.3.6.1.4.1.838.3.39.1.1.1.1 |
xPosConformance OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.39.2 |
xPosCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.39.2.1 |
xPosComplianceThe compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB. Unknown .1.3.6.1.4.1.838.3.39.2.1.1 |
xPosGroups OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.39.2.2 |
xPosAllGroupThe set of all accessible objects in this MIB. Unknown .1.3.6.1.4.1.838.3.39.2.2.1 |
More MIBs from Xedia
Browse all XediaMIBs →The XEDIA-SYSTEM-MIB provides SNMP objects to monitor and manage system-level parameters, including hardware status, resource utilization, and operational state, specifically for Xedia embedded networking devices.
The XEDIA-NETWORK-ADDRESS-TRANSLATOR-MIB provides management objects for monitoring and configuring Xedia's proprietary Network Address Translator (NAT) devices, enabling the tracking of translation sessions, address pool utilization, and packet flow statistics between RFC1918 private networks and the public Internet.
The XEDIA-POLICY-MIB enables SNMP-based configuration and monitoring of routing policy definitions, including match conditions, action sets, and policy application states, specifically within Xedia networking hardware. This module provides granular visibility into the operational status and parameter values of traffic steering rules to facilitate automated policy enforcement and troubleshooting.
The XEDIA-IPSEC-MIB enables monitoring and configuration of Xedia IPsec VPN tunnel states, security associations, and cryptographic parameters on Xedia networking hardware. It provides specific objects for tracking tunnel establishment status, packet counters, and IPsec policy enforcement metrics to ensure secure data transmission integrity.
The XEDIA-IP-MIB extends standard IETF IP-MIB functionality to monitor and manage IP-layer parameters, interfaces, and routing statistics specifically within Xedia hardware platforms. This module provides vendor-specific object identifiers for tracking IP traffic counters, interface states, and protocol configurations on Xedia network devices.
The XEDIA-NETWORK-TIME-PROTOCOL-MIB enables monitoring of Xedia's RFC 1305-compliant Network Time Protocol (NTP) implementation to manage UTC synchronization states, server association parameters, and time offset metrics across network hosts.