XEDIA-ISDN-MIB
AI MIB Summary
The XEDIA-ISDN-MIB extends standard ISDN management capabilities to monitor and control Xedia hardware-specific interfaces, session states, and link parameters beyond the baseline defined in RFC 2127.
This module defines additional objects for management of ISDN in Xedia devices, above and beyond what is defined in the standard rfc2127, and proposed drafts.
Main OID:
xediaIsdnMIB.1.3.6.1.4.1.838.3.37
18
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
18 total| Object Name |
|---|
xediaIsdnMIBThis module defines additional objects for management of ISDN
in Xedia devices, above and beyond what is defined in the
standard rfc2127, and proposed drafts. MODULE-IDENTITY .1.3.6.1.4.1.838.3.37 |
xisdnObjects OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.37.1 |
xisdnTableA stupid SNMP construct. SEQUENCE OF XisdnEntry .1.3.6.1.4.1.838.3.37.1.1 |
xisdnEntryAn entry containing additional management information
applicable to an ISDN interface. XisdnEntry .1.3.6.1.4.1.838.3.37.1.1.1 |
xisdnLoopbackStateloopback statusrw Enumeration .1.3.6.1.4.1.838.3.37.1.1.1.1 |
xdialCtlPeerCfgTableA stupid SNMP construct. SEQUENCE OF XdialCtlPeerCfgEntry .1.3.6.1.4.1.838.3.37.1.2 |
xdialCtlPeerCfgEntryAn entry containing additional management information
applicable to an ISDN interface. XdialCtlPeerCfgEntry .1.3.6.1.4.1.838.3.37.1.2.1 |
xcallControlforce outbound callrw Enumeration .1.3.6.1.4.1.838.3.37.1.2.1.1 |
xnailedUppermanant (non-signalling) B channel connectionrw Enumeration .1.3.6.1.4.1.838.3.37.1.2.1.2 |
xisdnVersionthe ISDN subsystem software version numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.838.3.37.1.3 |
xisdnSignalingTableISDN signaling table containing configuration and
operational parameters for all ISDN signaling
channels on this managed device. SEQUENCE OF XIsdnSignalingEntry .1.3.6.1.4.1.838.3.37.1.4 |
xisdnSignalingEntryAn entry in the ISDN Signaling Table. To create a new
entry, only isdnSignalingProtocol needs to be specified
before isdnSignalingStatus can become active(1). XIsdnSignalingEntry .1.3.6.1.4.1.838.3.37.1.4.1 |
isdnSignalingCallingAddress2The ISDN Address to be assigned to the second
B channel. Obviously not the right way to do this.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.838.3.37.1.4.1.1 |
isdnEndpointSpidThe Service profile IDentifier (SPID) information
for this Terminal Endpoint.
The SPID is composed of 9-20 numeric characters.
This information has to be defined in addition to
the local number for some switch protocol types,
e.g. Bellcore NI-1 and NI-2.
If this object is not required, it is a
zero length string.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.838.3.37.1.4.1.2 |
isdnEndpointSpid2The Service profile IDentifier (SPID) information
for this Terminal Endpoint.
The SPID is composed of 9-20 numeric characters.
This information has to be defined in addition to
the local number for some switch protocol types,
e.g. Bellcore NI-1 and NI-2.
If this object is not required, it is a
zero length string.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.838.3.37.1.4.1.3 |
xisdnConformance OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.37.2 |
xisdnCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.37.2.1 |
xisdnGroups OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.37.2.2 |