XEDIA-IGMP-MIB
The XEDIA-IGMP-MIB enables monitoring and configuration of IGMP router state variables, including group membership tables, query intervals, and host counts, specifically for Xedia-based networking hardware. This module facilitates the management of multicast group dynamics and router protocol parameters to ensure proper Layer 2/Layer 3 multicast traffic forwarding.
Imported Objects
Objects
15 total| Object Name |
|---|
xigmpMIBThe Xedia extention MIB module for management of IGMP routers. MODULE-IDENTITY .1.3.6.1.4.1.838.3.33 |
xigmpMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.33.1 |
xigmp OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.33.1.1 |
xigmpInMsgsTotal number of IGMP messages receivedro Counter32 .1.3.6.1.4.1.838.3.33.1.1.1 |
xigmpInErrorsTotal number of malformed IGMP messages receivedro Counter32 .1.3.6.1.4.1.838.3.33.1.1.2 |
xigmpInReportsTotal number of IGMP Report messages receivedro Counter32 .1.3.6.1.4.1.838.3.33.1.1.3 |
xigmpInV1ReportsTotal number of IGMP V1 Report messages receivedro Counter32 .1.3.6.1.4.1.838.3.33.1.1.4 |
xigmpInLeavesTotal number of IGMP Leave messages receivedro Counter32 .1.3.6.1.4.1.838.3.33.1.1.5 |
xigmpInQueriesTotal number of IGMP Query messages receivedro Counter32 .1.3.6.1.4.1.838.3.33.1.1.6 |
xigmpInUnknownsTotal number of IGMP messages of unknown types receivedro Counter32 .1.3.6.1.4.1.838.3.33.1.1.7 |
xigmpOutMsgsTotal number of IGMP messages transmitted by IGMP protocolro Counter32 .1.3.6.1.4.1.838.3.33.1.1.8 |
xigmpInterfaceTableThe (conceptual) table listing the interfaces on which IGMP is enabled. SEQUENCE OF XIgmpInterfaceEntry .1.3.6.1.4.1.838.3.33.1.1.9 |
xigmpInterfaceEntryAn entry (conceptual row) representing an interface on which IGMP is enabled. XIgmpInterfaceEntry .1.3.6.1.4.1.838.3.33.1.1.9.1 |
xigmpInterfaceIfIndexThe ifIndex value of the interface for which IGMP is enabled. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.838.3.33.1.1.9.1.1 |
xigmpInterfaceStateThe state of the IGMP interfacero Enumeration .1.3.6.1.4.1.838.3.33.1.1.9.1.2 |
More MIBs from Xedia
Browse all XediaMIBs →The XEDIA-SYSTEM-MIB provides SNMP objects to monitor and manage system-level parameters, including hardware status, resource utilization, and operational state, specifically for Xedia embedded networking devices.
The XEDIA-NETWORK-ADDRESS-TRANSLATOR-MIB provides management objects for monitoring and configuring Xedia's proprietary Network Address Translator (NAT) devices, enabling the tracking of translation sessions, address pool utilization, and packet flow statistics between RFC1918 private networks and the public Internet.
The XEDIA-POLICY-MIB enables SNMP-based configuration and monitoring of routing policy definitions, including match conditions, action sets, and policy application states, specifically within Xedia networking hardware. This module provides granular visibility into the operational status and parameter values of traffic steering rules to facilitate automated policy enforcement and troubleshooting.
The XEDIA-IPSEC-MIB enables monitoring and configuration of Xedia IPsec VPN tunnel states, security associations, and cryptographic parameters on Xedia networking hardware. It provides specific objects for tracking tunnel establishment status, packet counters, and IPsec policy enforcement metrics to ensure secure data transmission integrity.
The XEDIA-IP-MIB extends standard IETF IP-MIB functionality to monitor and manage IP-layer parameters, interfaces, and routing statistics specifically within Xedia hardware platforms. This module provides vendor-specific object identifiers for tracking IP traffic counters, interface states, and protocol configurations on Xedia network devices.
The XEDIA-NETWORK-TIME-PROTOCOL-MIB enables monitoring of Xedia's RFC 1305-compliant Network Time Protocol (NTP) implementation to manage UTC synchronization states, server association parameters, and time offset metrics across network hosts.