XEDIA-HDLC-MIB
The XEDIA-HDLC-MIB module enables monitoring of High-Level Data Link Control (HDLC) interface statistics and operational states on Xedia proprietary hardware by extending the standard IETF Ethernet-Like Interface MIB. It provides specific counters and status indicators for HDLC link sessions, error conditions, and throughput metrics on Xedia network devices.
Imported Objects
Objects
18 total| Object Name |
|---|
xediaHdlcMIBThis module defines proprietary objects that extend those in IETF's the Ethernet-Like Interface MIB. MODULE-IDENTITY .1.3.6.1.4.1.838.3.7 |
xhdlcObjects OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.7.1 |
xhdlcStatsTableAdditional Xedia proprietary statistics for hdlc-like interfaces. SEQUENCE OF XhdlcStatsEntry .1.3.6.1.4.1.838.3.7.1.1 |
xhdlcStatsEntryAdditional Xedia proprietary statistics for single hdlc-like interface. XhdlcStatsEntry .1.3.6.1.4.1.838.3.7.1.1.1 |
xhdlcStatsOutErrorUnderFlowsA count of TX Errorunderflows on a particular interface.ro Counter32 .1.3.6.1.4.1.838.3.7.1.1.1.1 |
xhdlcStatsInAbortsA count of RX Aborts on a particular interface.ro Counter32 .1.3.6.1.4.1.838.3.7.1.1.1.2 |
xhdlcStatsInResidualBitsThe count of residual bit errors.ro Counter32 .1.3.6.1.4.1.838.3.7.1.1.1.3 |
xhdlcStatsInInvalidLenA count of RX invalid lengths on a particular interface.ro Counter32 .1.3.6.1.4.1.838.3.7.1.1.1.4 |
xhdlcStatsInOverrunA count of RX Overruns on a particular interface.ro Counter32 .1.3.6.1.4.1.838.3.7.1.1.1.5 |
xhdlcConfigTableXedia proprietary configuration parameters for hdlc-like interfaces. SEQUENCE OF XhdlcConfigEntry .1.3.6.1.4.1.838.3.7.1.2 |
xhdlcConfigEntryXedia proprietary configuration parameters for single hdlc-like interface. XhdlcConfigEntry .1.3.6.1.4.1.838.3.7.1.2.1 |
xhdlcConfigClockingThe configured clocking of the interface.rw Enumeration .1.3.6.1.4.1.838.3.7.1.2.1.1 |
xhdlcConfigCrcModeThe configured CRC mode of the interface.rw Enumeration .1.3.6.1.4.1.838.3.7.1.2.1.2 |
xhdlcConformance OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.7.2 |
xhdlcCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.7.2.1 |
xhdlcComplianceThe compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB. Unknown .1.3.6.1.4.1.838.3.7.2.1.1 |
xhdlcGroups OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.7.2.2 |
xhdlcGroupThe set of all accessible objects in this MIB. Unknown .1.3.6.1.4.1.838.3.7.2.2.1 |
More MIBs from Xedia
Browse all XediaMIBs →The XEDIA-SYSTEM-MIB provides SNMP objects to monitor and manage system-level parameters, including hardware status, resource utilization, and operational state, specifically for Xedia embedded networking devices.
The XEDIA-NETWORK-ADDRESS-TRANSLATOR-MIB provides management objects for monitoring and configuring Xedia's proprietary Network Address Translator (NAT) devices, enabling the tracking of translation sessions, address pool utilization, and packet flow statistics between RFC1918 private networks and the public Internet.
The XEDIA-POLICY-MIB enables SNMP-based configuration and monitoring of routing policy definitions, including match conditions, action sets, and policy application states, specifically within Xedia networking hardware. This module provides granular visibility into the operational status and parameter values of traffic steering rules to facilitate automated policy enforcement and troubleshooting.
The XEDIA-IPSEC-MIB enables monitoring and configuration of Xedia IPsec VPN tunnel states, security associations, and cryptographic parameters on Xedia networking hardware. It provides specific objects for tracking tunnel establishment status, packet counters, and IPsec policy enforcement metrics to ensure secure data transmission integrity.
The XEDIA-IP-MIB extends standard IETF IP-MIB functionality to monitor and manage IP-layer parameters, interfaces, and routing statistics specifically within Xedia hardware platforms. This module provides vendor-specific object identifiers for tracking IP traffic counters, interface states, and protocol configurations on Xedia network devices.
The XEDIA-NETWORK-TIME-PROTOCOL-MIB enables monitoring of Xedia's RFC 1305-compliant Network Time Protocol (NTP) implementation to manage UTC synchronization states, server association parameters, and time offset metrics across network hosts.