XEDIA-ETHERNET-MIB
AI MIB Summary
The XEDIA-ETHERNET-MIB module enables monitoring of proprietary Ethernet interface attributes and extended counters on Xedia hardware by augmenting standard IETF Ethernet-Like Interface MIB definitions. This extension facilitates granular visibility into vendor-specific link states, error statistics, and performance metrics not covered by generic SNMP standards.
This module defines proprietary objects that extend those in IETF's the Ethernet-Like Interface MIB.
Main OID:
xediaEthernetMIB.1.3.6.1.4.1.838.3.3
33
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
33 total| Object Name |
|---|
xediaEthernetMIBThis module defines proprietary objects that extend those in IETF's the Ethernet-Like Interface MIB. MODULE-IDENTITY .1.3.6.1.4.1.838.3.3 |
xdot3Objects OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.3.1 |
xdot3StatsTableAdditional Xedia proprietary statistics for ethernet-like interfaces. SEQUENCE OF Xdot3StatsEntry .1.3.6.1.4.1.838.3.3.1.1 |
xdot3StatsEntryAdditional Xedia proprietary statistics for single ethernet-like interface. Xdot3StatsEntry .1.3.6.1.4.1.838.3.3.1.1.1 |
xdot3StatsOutUnderflowsA count of frames not transmitted on a particular interface because of underflow. An underflow occurs when the driver does not keep up with the hardware's transmit speed in providing buffers.ro Counter32 .1.3.6.1.4.1.838.3.3.1.1.1.1 |
xdot3StatsOutNoCarriersThe number of times that the carrier signal from the transceiver was not present when a frame was to be transmitted.ro Counter32 .1.3.6.1.4.1.838.3.3.1.1.1.2 |
xdot3StatsOutCarrierLossesThe number of times the carrier was lost during transmission.ro Counter32 .1.3.6.1.4.1.838.3.3.1.1.1.3 |
xdot3StatsOutJabberTimeoutsThe number of times a transmission was aborted because the jabber timer timed out.ro Counter32 .1.3.6.1.4.1.838.3.3.1.1.1.4 |
xdot3StatsOutTotalCollisionsThe total number of collisions that have occurred while transmitting on this interface.ro Counter32 .1.3.6.1.4.1.838.3.3.1.1.1.5 |
xdot3StatsInDescriptorErrorsThe number of frames that were truncated because they did not fit within the current desriptor buffers.ro Counter32 .1.3.6.1.4.1.838.3.3.1.1.1.6 |
xdot3StatsInRuntsThe number of runt frames. A runt frame may have been damaged by collision or premature termination before the collision window had passed.ro Counter32 .1.3.6.1.4.1.838.3.3.1.1.1.7 |
xdot3StatsInTotalCollisionsThe number of collisions detected on incoming frames.ro Counter32 .1.3.6.1.4.1.838.3.3.1.1.1.8 |
xdot3StatsInDribblesThe number of frames which were not a multiple of 8 bytes.ro Counter32 .1.3.6.1.4.1.838.3.3.1.1.1.9 |
xdot3StatsInOverflowsThe number of frames that were truncated due to FIFO overflow. This indicates a hardware problem (as opposed to MissedFrames which indicates the software did not keep up).ro Counter32 .1.3.6.1.4.1.838.3.3.1.1.1.10 |
xdot3StatsInV1EthFramesThe number of Ethernet-type (version 1) frames.ro Counter32 .1.3.6.1.4.1.838.3.3.1.1.1.11 |
xdot3StatsInV2Dot3FramesThe number of 802.3-type (version 2) frames.ro Counter32 .1.3.6.1.4.1.838.3.3.1.1.1.12 |
xdot3StatsInMissedFramesThe number of frames that were received by the hardware but that were not picked up by the driver.ro Counter32 .1.3.6.1.4.1.838.3.3.1.1.1.13 |
xdot3NegotiatedConfigSpeedThe negotiated configured speed of the interface when the auto negotiates mode is enable.ro Enumeration .1.3.6.1.4.1.838.3.3.1.1.1.14 |
xdot3NegotiatedConfigDuplexModeThe negotiated configured duplex mode of the interface.ro Enumeration .1.3.6.1.4.1.838.3.3.1.1.1.15 |
xdot3NegotiatedFlowControlThe negotiated configured flow control parameters.ro Enumeration .1.3.6.1.4.1.838.3.3.1.1.1.16 |
xdot3IfOperStatusThis is a reference object (from the ifmib.mi2's ifOperStatus) reports the current operational states of the interface for the auto-negotiate configuration purpose.ro Enumeration .1.3.6.1.4.1.838.3.3.1.1.1.17 |
xdot3ConfigTableXedia proprietary configuration parameters for ethernet-like interfaces. SEQUENCE OF Xdot3ConfigEntry .1.3.6.1.4.1.838.3.3.1.2 |
xdot3ConfigEntryXedia proprietary configuration parameters for single ethernet-like interface. Xdot3ConfigEntry .1.3.6.1.4.1.838.3.3.1.2.1 |
xdot3ConfigSpeedThe configured speed of the interface. This may be set by the administrator or may be the result of auto-negotiation.rw Enumeration .1.3.6.1.4.1.838.3.3.1.2.1.1 |
xdot3ConfigDuplexModeThe configured mode of the interface.rw Enumeration .1.3.6.1.4.1.838.3.3.1.2.1.2 |
xdot3ConfigMediaThe media type of the interface. The value 'tx(1)' indicates copper, 'fx(2)' indicates 850 nm multi-mode fiber, 'sx(3)' indicates 850 nm multi-mode fiber and lx(4) indicates 1300 nm single-mode or multi-mode fiber.ro Enumeration .1.3.6.1.4.1.838.3.3.1.2.1.3 |
xdot3ConfigCaptureEffectResolThis object controls whether a non-standard backoff algorithm is used for collision handling in order to avoid 'capture effect'. Capture effect occurs when two stations transmit in such a way that, because of collision backoff, one station captures the channel for an unfair amount of time (and the line may remain idle for a long time after that station stops transmitting because of the second station increasing its backoff time.) The value of 'enabled(1)' indicates the enhanced algorithm will be use. The value 'disabled(2)' is the default and indicates the standard backoff algorithm is used.rw Enumeration .1.3.6.1.4.1.838.3.3.1.2.1.4 |
xdot3ConfigAutoNegotiateThis object controls whether to negotiate the speed and duplex mode for 10/100 fast ethernet; and negotiate duplex mode and MAC control for gigabit ethernet interface.rw Enumeration .1.3.6.1.4.1.838.3.3.1.2.1.5 |
xdot3Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.3.2 |
xdot3Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.3.2.1 |
xdot3ComplianceThe compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB. Unknown .1.3.6.1.4.1.838.3.3.2.1.1 |
xdot3Groups OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.3.2.2 |
xdot3GroupThe set of all accessible objects in this MIB. Unknown .1.3.6.1.4.1.838.3.3.2.2.1 |