XEDIA-DVMRP-MIB
The XEDIA-DVMRP-MIB module enables monitoring and management of Distance Vector Multicast Routing Protocol (DVMRP) routing tables, neighbor adjacencies, and multicast forwarding states on Xedia-based network hardware. It provides specific counters and gauges for tracking multicast group memberships, packet forwarding statistics, and protocol convergence events within the DVMRP domain.
Imported Objects
Objects
9 total| Object Name |
|---|
xdvmrpMIBThe Xedia extention MIB module for management of DVMRP routers. MODULE-IDENTITY .1.3.6.1.4.1.838.3.32 |
xdvmrpMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.32.1 |
xdvmrp OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.32.1.1 |
xdvmrpInterfaceTableThe (conceptual) table listing the router's multicast- capable interfaces. SEQUENCE OF XdvmrpInterfaceEntry .1.3.6.1.4.1.838.3.32.1.1.1 |
xdvmrpInterfaceEntryAn entry (conceptual row) in the dvmrpInterfaceTable. This row augments ipMRouteInterfaceEntry in the IP Multicast MIB, where the threshold object resides. XdvmrpInterfaceEntry .1.3.6.1.4.1.838.3.32.1.1.1.1 |
xdvmrpInterfaceIfIndexThe ifIndex value of the interface for which DVMRP is enabled. INTEGER .1.3.6.1.4.1.838.3.32.1.1.1.1.1 |
xdvmrpInterfaceStateThe current status of this DVMRP interface.ro Enumeration .1.3.6.1.4.1.838.3.32.1.1.1.1.2 |
xdvmrpInterfaceDefaultInformationControl the advertisement of default route (0.0.0.0) to the DVMRP neighbor(s) on the interface. When the value is set to disabled(1), no default route is advertised. When set to originate(2), default route is advertised along the other routes. When the value is set to only(3), only the default route is advertised through this interface.rw Enumeration .1.3.6.1.4.1.838.3.32.1.1.1.1.3 |
xdvmrpInterfaceUnicastTunnelControl the transmission of DVMRP messages to be unicast to the remote end point of the tunnel instead of send through the tunnel. Enabled this to interoperate with mrouted or cisco with tunnel configured in dvmrp mode.rw Enumeration .1.3.6.1.4.1.838.3.32.1.1.1.1.4 |
More MIBs from Xedia
Browse all XediaMIBs →The XEDIA-SYSTEM-MIB provides SNMP objects to monitor and manage system-level parameters, including hardware status, resource utilization, and operational state, specifically for Xedia embedded networking devices.
The XEDIA-NETWORK-ADDRESS-TRANSLATOR-MIB provides management objects for monitoring and configuring Xedia's proprietary Network Address Translator (NAT) devices, enabling the tracking of translation sessions, address pool utilization, and packet flow statistics between RFC1918 private networks and the public Internet.
The XEDIA-POLICY-MIB enables SNMP-based configuration and monitoring of routing policy definitions, including match conditions, action sets, and policy application states, specifically within Xedia networking hardware. This module provides granular visibility into the operational status and parameter values of traffic steering rules to facilitate automated policy enforcement and troubleshooting.
The XEDIA-IPSEC-MIB enables monitoring and configuration of Xedia IPsec VPN tunnel states, security associations, and cryptographic parameters on Xedia networking hardware. It provides specific objects for tracking tunnel establishment status, packet counters, and IPsec policy enforcement metrics to ensure secure data transmission integrity.
The XEDIA-IP-MIB extends standard IETF IP-MIB functionality to monitor and manage IP-layer parameters, interfaces, and routing statistics specifically within Xedia hardware platforms. This module provides vendor-specific object identifiers for tracking IP traffic counters, interface states, and protocol configurations on Xedia network devices.
The XEDIA-NETWORK-TIME-PROTOCOL-MIB enables monitoring of Xedia's RFC 1305-compliant Network Time Protocol (NTP) implementation to manage UTC synchronization states, server association parameters, and time offset metrics across network hosts.