XEDIA-DS3-MIB
AI MIB Summary
The XEDIA-DS3-MIB extends standard DS3 monitoring capabilities to Xedia hardware, enabling the tracking of link status, error counters, and performance metrics specific to DS3 interfaces beyond standard MIB definitions. This module facilitates granular fault isolation and performance analysis for T3/DS3 circuits on Xedia network devices.
This module defines additional objects for management of DS3 links in Xedia devices, above and beyond what is defined in the standard DS3 mib, and proposed drafts.
Main OID:
xediaDs3MIB.1.3.6.1.4.1.838.3.11
35
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
35 total| Object Name |
|---|
xediaDs3MIBThis module defines additional objects for management of DS3
links in Xedia devices, above and beyond what is defined in the
standard DS3 mib, and proposed drafts. MODULE-IDENTITY .1.3.6.1.4.1.838.3.11 |
xDs3Objects OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.11.1 |
xDs3Tables OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.11.2 |
xDsx3ConfigTableThe Xedia DS3 Config table contains extensions to
the DS3 Config table. SEQUENCE OF XDsx3ConfigEntry .1.3.6.1.4.1.838.3.11.2.1 |
xDsx3ConfigEntryAn entry in the Xedia DS3 Config table. XDsx3ConfigEntry .1.3.6.1.4.1.838.3.11.2.1.1 |
xdsx3LineStatusIndicates the line status of the interface. This obect
is identical to dsx3LineStatus in the DS3 MIB except
that it uses the SNMPv2 BIT STRING object type.ro XDsx3LineStatus .1.3.6.1.4.1.838.3.11.2.1.1.1 |
xdsx3LoopbackStatusIndicates the local and remote loopback status of the
interface. This object is identical to dsx3LoopbackStatus
in the DS3 MIB except that it uses the SNMPv2 BIT STRING
object type.ro BIT STRING { dsx3NoLoopback(0), dsx3NearEndPayloadLoopback(1), dsx3NearEndLineLoopback(2), dsx3NearEndOtherLoopback(3), dsx3NearEndInwardLoopback(4), dsx3FarEndPayloadLoopback(5), dsx3FarEndLineLoopback(6) } .1.3.6.1.4.1.838.3.11.2.1.1.2 |
xdsx3ScramblingThe status of payload scrambling type
is enabled at the data port.rw Enumeration .1.3.6.1.4.1.838.3.11.2.1.1.3 |
xDsx3CurrentTableThe Xedia DS3 Current table contains extensions to
the DS3 Current table which includes statistics
being collected for the current 15 minute interval. SEQUENCE OF XDsx3CurrentEntry .1.3.6.1.4.1.838.3.11.2.2 |
xDsx3CurrentEntryAn entry in the Xedia DS3 Current table. XDsx3CurrentEntry .1.3.6.1.4.1.838.3.11.2.2.1 |
xdsx3CurrentFBEsThe number of F and M Frame Bit Errored Seconds
encountered during the current 15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.838.3.11.2.2.1.1 |
xdsx3CurrentFEBEsThe number of Far End Block Errors encountered
in the current 15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.838.3.11.2.2.1.2 |
xdsx3CurrentPBESsThe number of P-Bit Bursty Errored Seconds (PBES)
encountered during the current 15 minute interval.
A PBES is a second with more than 1 and less than
45 ocurring p-bit coding violations and NO Out of
Frame defects nor detected incoming AIS. This gauge
is not incremented when UASs are counted.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.838.3.11.2.2.1.3 |
xdsx3CurrentCBESsThe number of C-Bit Bursty Errored Seconds (CBES)
encountered during the current 15 minute interval.
A CBES is a second with more than 1 and less than
45 ocurring c-bit coding violations and NO Out of
Frame defects nor detected incoming AIS. This gauge
is not incremented when UASs are counted.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.838.3.11.2.2.1.4 |
xdsx3CurrentLocalLineStatusThe bitwise ORing of the dsx3LineStatus values (local
line status) encountered during the current 15
minute interval. This object is useful in identifying
all xdsx3LineStatus conditions which occured during
the interval including the NO_ALARM condition.ro XDsx3LineStatus .1.3.6.1.4.1.838.3.11.2.2.1.5 |
xdsx3CurrentRemoteLineStatusThe bitwise ORing of the far end dsx3LineStatus values
(remote line status) encountered during the current 15
minute interval. This object is useful in identifying
all dsx3LineStatus conditions which occured during the
interval including the NO_ALARM condition.ro XDsx3LineStatus .1.3.6.1.4.1.838.3.11.2.2.1.6 |
xDsx3IntervalTableThe Xedia DS3 Interval Table contains extensions to
the DS3 Interval table which includes statistics
collected over the previous 24 hours of operation.
The past 24 hours are broken into 96 completed 15
minute intervals. SEQUENCE OF XDsx3IntervalEntry .1.3.6.1.4.1.838.3.11.2.3 |
xDsx3IntervalEntryAn entry in the Xedia DS3 Interval Table. XDsx3IntervalEntry .1.3.6.1.4.1.838.3.11.2.3.1 |
xdsx3IntervalFBEsThe number of F and M Frame Bit Errored Seconds
encountered during the interval.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.838.3.11.2.3.1.1 |
xdsx3IntervalFEBEsThe number of Far End Block Errors encountered
during the interval.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.838.3.11.2.3.1.2 |
xdsx3IntervalPBESsThe number of P-Bit Bursty Errored Seconds (PBES)
encountered during the interval.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.838.3.11.2.3.1.3 |
xdsx3IntervalCBESsThe number of C-Bit Bursty Errored Seconds (CBES)
encountered during the interval.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.838.3.11.2.3.1.4 |
xdsx3IntervalLocalLineStatusThe bitwise ORing of the dsx3LineStatus values (local
line status) encountered during the interval.ro XDsx3LineStatus .1.3.6.1.4.1.838.3.11.2.3.1.5 |
xdsx3IntervalRemoteLineStatusThe bitwise ORing of the far end dsx3LineStatus values
(remote line status) encountered during the interval.ro XDsx3LineStatus .1.3.6.1.4.1.838.3.11.2.3.1.6 |
xDsx3TotalTableThe Xedia DS3 Total Table contains extensions to the
DS3 Total table which includes cumulative sums of the
various statistics for the 24 hour period preceding
the current interval. Invalid 15 minute intervals count
as 0. SEQUENCE OF XDsx3TotalEntry .1.3.6.1.4.1.838.3.11.2.4 |
xDsx3TotalEntryAn entry in the Xedai DS3 Total Table. XDsx3TotalEntry .1.3.6.1.4.1.838.3.11.2.4.1 |
xdsx3TotalFBEsThe sum of F and M Frame Bit Errored Seconds
for all intervals in the interval table.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.838.3.11.2.4.1.1 |
xdsx3TotalFEBEsThe sum of Far End Block Errors for all intervals
in the interval table.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.838.3.11.2.4.1.2 |
xdsx3TotalPBESsThe sum of P-Bit Bursty Errored Seconds (PBES)
for all intervals in the interval table.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.838.3.11.2.4.1.3 |
xdsx3TotalCBESsThe sum of C-Bit Bursty Errored Seconds (CBES)
for all intervals in the interval table.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.838.3.11.2.4.1.4 |
xdsx3TotalLocalLineStatusThe bitwise ORing of the dsx3LineStatus values (local
line status) for all intervals in the interval table.ro XDsx3LineStatus .1.3.6.1.4.1.838.3.11.2.4.1.5 |
xdsx3TotalRemoteLineStatusThe bitwise ORing of the far end dsx3LineStatus values
(remote line status) for all intervals in the interval
table.ro XDsx3LineStatus .1.3.6.1.4.1.838.3.11.2.4.1.6 |
xDs3Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.11.3 |
xDs3Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.11.3.1 |
xDs3Groups OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.11.3.2 |