XEDIA-DRIVER-MIB
The XEDIA-DRIVER-MIB module provides proprietary extensions for monitoring and managing XEDIA network driver-specific operational states, error counters, and interface statistics beyond standard driver MIB definitions. It enables granular visibility into proprietary driver behaviors, link status anomalies, and hardware-level performance metrics for XEDIA network adapters.
Imported Objects
Objects
20 total| Object Name |
|---|
xediaDriverMIBThis module defines proprietary objects that extend those in the driver type MIBs. MODULE-IDENTITY .1.3.6.1.4.1.838.3.6 |
xdriverObjects OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.6.1 |
xdriverStatsTableXedia proprietary statistics for drivers. SEQUENCE OF XdriverStatsEntry .1.3.6.1.4.1.838.3.6.1.1 |
xdriverStatsEntryXedia proprietary statistics for single driver interface. XdriverStatsEntry .1.3.6.1.4.1.838.3.6.1.1.1 |
xdriverStatsInternalQOverflowsA count of the number of times the driver software failed to drain the hardware's statistics queue fast enough (and therefore may not have incremented some statistics properly).ro Counter32 .1.3.6.1.4.1.838.3.6.1.1.1.1 |
xdriverStatsOutGoodFramesThe total number of frames that were transmitted without error. This is the sum of ifOutUcastPkts, ifOutMulticastPkts, and ifOutBroadcastPkts.ro Counter32 .1.3.6.1.4.1.838.3.6.1.1.1.2 |
xdriverStatsOutPercentGoodThe percentage of the total frames that were transmitted without error. (This is the throughput of the interface.)ro Gauge32 .1.3.6.1.4.1.838.3.6.1.1.1.3 |
xdriverStatsOutPercentBadThe percentage of the total frames that the higher layers requested to be transmitted that could not be due to errors.ro Gauge32 .1.3.6.1.4.1.838.3.6.1.1.1.4 |
xdriverStatsOutAvgFrameLenThe average length of the frames transmitted out this interface.ro Gauge32 .1.3.6.1.4.1.838.3.6.1.1.1.5 |
xdriverStatsInCRCErrorsThe number of frames that had CRC errors on this interface.ro Gauge32 .1.3.6.1.4.1.838.3.6.1.1.1.6 |
xdriverStatsInGoodFramesThe number of frames that were received on this interface that did not have errors.ro Counter32 .1.3.6.1.4.1.838.3.6.1.1.1.7 |
xdriverStatsInNoResourcesThe number of times the driver was suspended because of a lack of resources.ro Counter32 .1.3.6.1.4.1.838.3.6.1.1.1.8 |
xdriverStatsInPercentGoodThe percentage of incoming frames that did not have any error.ro Gauge32 .1.3.6.1.4.1.838.3.6.1.1.1.9 |
xdriverStatsInPercentBadThe percentage of incoming frames that had errors.ro Gauge32 .1.3.6.1.4.1.838.3.6.1.1.1.10 |
xdriverStatsInAvgFrameLenThe average length of a frame received on the interface.ro Gauge32 .1.3.6.1.4.1.838.3.6.1.1.1.11 |
xdriverConformance OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.6.2 |
xdriverCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.6.2.1 |
xdriverComplianceThe compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB. Unknown .1.3.6.1.4.1.838.3.6.2.1.1 |
xdriverGroups OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.6.2.2 |
xdriverGroupThe set of all accessible objects in this MIB. Unknown .1.3.6.1.4.1.838.3.6.2.2.1 |
More MIBs from Xedia
Browse all XediaMIBs →The XEDIA-SYSTEM-MIB provides SNMP objects to monitor and manage system-level parameters, including hardware status, resource utilization, and operational state, specifically for Xedia embedded networking devices.
The XEDIA-NETWORK-ADDRESS-TRANSLATOR-MIB provides management objects for monitoring and configuring Xedia's proprietary Network Address Translator (NAT) devices, enabling the tracking of translation sessions, address pool utilization, and packet flow statistics between RFC1918 private networks and the public Internet.
The XEDIA-POLICY-MIB enables SNMP-based configuration and monitoring of routing policy definitions, including match conditions, action sets, and policy application states, specifically within Xedia networking hardware. This module provides granular visibility into the operational status and parameter values of traffic steering rules to facilitate automated policy enforcement and troubleshooting.
The XEDIA-IPSEC-MIB enables monitoring and configuration of Xedia IPsec VPN tunnel states, security associations, and cryptographic parameters on Xedia networking hardware. It provides specific objects for tracking tunnel establishment status, packet counters, and IPsec policy enforcement metrics to ensure secure data transmission integrity.
The XEDIA-IP-MIB extends standard IETF IP-MIB functionality to monitor and manage IP-layer parameters, interfaces, and routing statistics specifically within Xedia hardware platforms. This module provides vendor-specific object identifiers for tracking IP traffic counters, interface states, and protocol configurations on Xedia network devices.
The XEDIA-NETWORK-TIME-PROTOCOL-MIB enables monitoring of Xedia's RFC 1305-compliant Network Time Protocol (NTP) implementation to manage UTC synchronization states, server association parameters, and time offset metrics across network hosts.