XEDIA-DHCP-MIB
AI MIB Summary
The XEDIA-DHCP-MIB enables monitoring and management of Dynamic Host Configuration Protocol (DHCP) server and client operations specifically on Xedia hardware platforms. It provides access to DHCP-specific metrics such as active lease counts, binding table states, and server interface statistics for troubleshooting address allocation and network connectivity issues.
This module defines additional objects for management of DHCP support in Xedia devices.
Main OID:
xediaDhcpMIB.1.3.6.1.4.1.838.3.28
19
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
19 total| Object Name |
|---|
xediaDhcpMIBThis module defines additional objects for management of DHCP
support in Xedia devices. MODULE-IDENTITY .1.3.6.1.4.1.838.3.28 |
xdhcpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.28.1 |
xdhcpRelay OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.28.1.1 |
xdhcpRelayModeThe Administrative mode to control DHCP relay functions.rw Enumeration .1.3.6.1.4.1.838.3.28.1.1.1 |
xdhcpRelayMaxHopsThis value identifies the maximum number of hops allowed for
requests passing through this relay agent. Packets received
with a hop count greater than this value will be discarded.rw INTEGER .1.3.6.1.4.1.838.3.28.1.1.2 |
xdhcpRelayIncludeCircuitIDWhether the relay agent should add the circuit ID of the ATM or
frame relay circuit that a DHCP relay request was received to
the DHCP relay request. The circuit ID will be added as a
agent circuit ID sub-option of a DHCP relay agent information
option (option 82) and will be used by the relay agent to
forward the reply to the correct circuit.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.838.3.28.1.1.3 |
xdhcpRelayDestTableA table of DHCP server destinations that the DHCP relay agent will
will relay requests to and responses from. SEQUENCE OF XdhcpRelayDestEntry .1.3.6.1.4.1.838.3.28.1.1.10 |
xdhcpRelayDestEntryInformation about a single DHCP server. XdhcpRelayDestEntry .1.3.6.1.4.1.838.3.28.1.1.10.1 |
xdhcpRelayDestIndexA number uniquely identifying each DHCP
server that the DHCP relay agent will relay
requests to and responses from. INTEGER .1.3.6.1.4.1.838.3.28.1.1.10.1.1 |
xdhcpRelayDestinationThe destination to which DHCP requests will be sent. It may
be a specific server IP address, a local IP subnet on which
requests will be broadcast, or an IP server name to be
resolved through a DNS lookup.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.838.3.28.1.1.10.1.2 |
xdhcpRelayDestOperAddressThe operational IP address for this server destination.
It will either be the configured IP address or the resolved
address if a server name was specified in xdhcpRelayDestination.ro IpAddress .1.3.6.1.4.1.838.3.28.1.1.10.1.3 |
xdhcpRelayDestRequestsThe number of DHCP requests that were received on
this interface.ro Counter32 .1.3.6.1.4.1.838.3.28.1.1.10.1.4 |
xdhcpRelayDestRepliesThe number of DHCP replies that were received on
this interface.ro Counter32 .1.3.6.1.4.1.838.3.28.1.1.10.1.5 |
xdhcpRelayDestProtocolThe protocol(s) to be relayed to this destination.rw Enumeration .1.3.6.1.4.1.838.3.28.1.1.10.1.6 |
xdhcpRelayDestRowStatusThis variable displays the status of the entry. Setting it to
'destroy' marks the entry as removed. Eventually, when no other
applications depend on that particular resource, it will be completely
removed from the table. Setting it to either 'create', or 'active'
will add a row to the table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.838.3.28.1.1.10.1.7 |
xdhcpRelayDestInterfaceThe name of the IP interface over which the DHCP relay
destination will be attempted. A value of 'all' represents
all IP interfaces.rw DisplayString .1.3.6.1.4.1.838.3.28.1.1.10.1.8 |
xdhcpConformance OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.28.2 |
xdhcpCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.28.2.1 |
xdhcpGroups OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.28.2.2 |