Home/Catalog/XEDIA-ATM-MIB

XEDIA-ATM-MIB

AI MIB Summary

The XEDIA-ATM-MIB extends standard SNMP capabilities to monitor and manage proprietary ATM link parameters, including physical interface states, traffic counters, and error statistics, specifically within Xedia hardware platforms. This module enables granular visibility into ATM layer performance metrics that exceed the scope of the IETF standard ATM-MIB.

This module defines additional objects for management of ATM links in Xedia devices, above and beyond what is defined in the standard ATM mib, and proposed drafts.
Main OID:
xediaAtmMIB.1.3.6.1.4.1.838.3.12
24
Objects
Active
Status
5
Dependencies

Imported Objects

Objects

24 total
Object Name
xediaAtmMIBThis module defines additional objects for management of ATM links in Xedia devices, above and beyond what is defined in the standard ATM mib, and proposed drafts.
MODULE-IDENTITY
.1.3.6.1.4.1.838.3.12
xAtmObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.838.3.12.1
xAtmTables
OBJECT IDENTIFIER
.1.3.6.1.4.1.838.3.12.2
xAtmInterfaceConfTableThe Xedia ATM Interface Configuration Table contains extensions to the ATM Interface Configuration Table, one entry per ATM interface.
SEQUENCE OF XAtmInterfaceConfEntry
.1.3.6.1.4.1.838.3.12.2.1
xAtmInterfaceConfEntryAn entry in the Xedia ATM Interface Configuration Table.
XAtmInterfaceConfEntry
.1.3.6.1.4.1.838.3.12.2.1.1
xAtmInterfaceEmptyCellsSpecifies the type of cells that the interface sends as a filler when there is no data to send.rw
Enumeration
.1.3.6.1.4.1.838.3.12.2.1.1.1
xAtmInterfaceDs3PlcpTableThe Xedia ATM Interface DS3 PLCP Table contains extensions to the ATM Interface DS3 PLCP Table, one entry per ATM interface.
SEQUENCE OF XAtmInterfaceDs3PlcpEntry
.1.3.6.1.4.1.838.3.12.2.2
xAtmInterfaceDs3PlcpEntryAn entry in the Xedia ATM Interface DS3 PLCP Table.
XAtmInterfaceDs3PlcpEntry
.1.3.6.1.4.1.838.3.12.2.2.1
xAtmInterfaceDs3PlcpCellAlignSpecifies the cell alignment mechanism used by the DS3 framer. In hec(1) mode, the framer determines cell delineation via the HEC alignment method. In this mode, 53-octet cells are expected. In plcp(2) mode, the framer PLCP framing overhead is used which results in 57-octet cells.rw
Enumeration
.1.3.6.1.4.1.838.3.12.2.2.1.1
xAtmTrafficDescrTableThe Xedia ATM Traffic Descriptor Table contains extensions to the ATM Traffic Descriptor Table.
SEQUENCE OF XAtmTrafficDescrEntry
.1.3.6.1.4.1.838.3.12.2.3
xAtmTrafficDescrEntryAn entry in the Xedia ATM Traffic Descriptor Table.
XAtmTrafficDescrEntry
.1.3.6.1.4.1.838.3.12.2.3.1
xAtmTrafficDescrDescrA textual description for the traffic descriptor.rw
DisplayString
.1.3.6.1.4.1.838.3.12.2.3.1.1
xAtmTrafficDescrQoSClassThis object identifies the QoS Class. It is identical to the atmTrafficDescrQoSClass object in the ATM Mgt MIB except that it provides textual enumerations for the values.rw
Enumeration
.1.3.6.1.4.1.838.3.12.2.3.1.2
xAtmAal5VccTableThe Xedia ATM AAL5 VCC Table contains extensions to the ATM AAL5 VCC Performance Parameters, one entry per ATM AAL5 virtual channel on an ATM interface.
SEQUENCE OF XAtmAal5VccEntry
.1.3.6.1.4.1.838.3.12.2.4
xAtmAal5VccEntryAn entry in the Xedia ATM AAL5 VCC Table.
XAtmAal5VccEntry
.1.3.6.1.4.1.838.3.12.2.4.1
xAtmAal5VccTxPdusThe number of AAL5 PDUs successfully passed to the ATM interface's driver for transmission on the virtual channel.ro
Counter32
.1.3.6.1.4.1.838.3.12.2.4.1.1
xAtmAal5VccTxOctetsThe number of AAL5 octets successfully passed to the ATM interface's driver for transmission on the virtual channel.ro
Counter32
.1.3.6.1.4.1.838.3.12.2.4.1.2
xAtmAal5VccTxPduFailuresThe number of AAL5 PDUs which could not be passed to the ATM interface's driver for transmission on the virtual channel. Possible reasons include VCL operational status down or driver unable to accept PDU due to state or lack of resources.ro
Counter32
.1.3.6.1.4.1.838.3.12.2.4.1.3
xAtmAal5VccRxPdusThe number of AAL5 PDUs successfully received on the virtual channel from the ATM interface and delivered to a higher layer.ro
Counter32
.1.3.6.1.4.1.838.3.12.2.4.1.4
xAtmAal5VccRxOctetsThe number of AAL5 octets successfully received on the virtual channel from the ATM interface and delivered to a higher layer.ro
Counter32
.1.3.6.1.4.1.838.3.12.2.4.1.5
xAtmAal5VccRxPduDiscardsThe number of AAL5 PDUs received and discarded on the virtual channel from the ATM interface. Possible reasons for discard include: VCL operational state down, no higher layer client connected to VCL, etc.ro
Counter32
.1.3.6.1.4.1.838.3.12.2.4.1.6
xAtmConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.838.3.12.3
xAtmCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.838.3.12.3.1
xAtmGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.838.3.12.3.2
XEDIA-ATM-MIB - SNMP MIB Reference | MIBs Explorer