XEDIA-ADDRPOOL-MIB
The XEDIA-ADDRPOOL-MIB enables SNMP-based configuration and monitoring of dynamic IP address pool allocation, utilization, and lease status on Xedia network appliances. It exposes specific metrics for pool capacity, available address counts, and active assignment states to facilitate automated resource management and capacity planning.
Imported Objects
Objects
20 total| Object Name |
|---|
xediaAddrPoolMIBThis module defines objects for management of Xedia's IP Address Pool. MODULE-IDENTITY .1.3.6.1.4.1.838.3.43 |
addrPoolObjects OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.43.1 |
addrPoolConfigTableThe Addr Pool configuration table. SEQUENCE OF AddrPoolConfigEntry .1.3.6.1.4.1.838.3.43.1.1 |
addrPoolConfigEntryAn Addr Pool configuration entry. An entry in this table corresponds to a pool of ip addresses. AddrPoolConfigEntry .1.3.6.1.4.1.838.3.43.1.1.1 |
addrPoolConfigIdentifierThe identifier is a domain name which can be matched against the user domain as received in the PPP user authentication information. For example if a local PPP layer was connected to a downlink of this Layer 2 Dial layer, and it's remote PPP peer requested that an address be assigned to it, the local PPP could request this address from the Layer 2 Dial layer, which would allocate it from a subnet defined in this table. DisplayString .1.3.6.1.4.1.838.3.43.1.1.1.1 |
addrPoolConfigNetworkNetwork from which ip addresses can be allocated and assigned to remote PPP peers.rw IpAddress .1.3.6.1.4.1.838.3.43.1.1.1.2 |
addrPoolConfigMaskThe subnet mask for addrPoolConfigNetworkrw IpAddress .1.3.6.1.4.1.838.3.43.1.1.1.3 |
addrPoolConfigRowStatusThe status of this Pool entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.838.3.43.1.1.1.4 |
addrPoolAllocationTableThe Addr Pool allocation table. SEQUENCE OF AddrPoolAllocationEntry .1.3.6.1.4.1.838.3.43.1.2 |
addrPoolAllocationEntryAn Addr Pool allocation entry. An entry in this table corresponds to a pool of ip addresses. AddrPoolAllocationEntry .1.3.6.1.4.1.838.3.43.1.2.1 |
addrPoolAllocationNameIdentifierThe identifier is a domain name. DisplayString .1.3.6.1.4.1.838.3.43.1.2.1.1 |
addrPoolAllocationIpAddressAn ip address allocated from this address pool. IpAddress .1.3.6.1.4.1.838.3.43.1.2.1.2 |
addrPoolAllocationUserLayerThe name of the local connected layer to which the address was allocated.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.838.3.43.1.2.1.3 |
addrPoolAllocationRemoteUserThe name of the remote user to which the address was allocated.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.838.3.43.1.2.1.4 |
addrPoolConformance OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.43.2 |
addrPoolCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.43.2.1 |
addrPoolComplianceThe compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB. Unknown .1.3.6.1.4.1.838.3.43.2.1.1 |
addrPoolGroups OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.43.2.2 |
addrPoolConfigGroupA collection of objects providing configuration of address pools. Unknown .1.3.6.1.4.1.838.3.43.2.2.1 |
addrPoolAllocationGroupA collection of objects providing status of address pools. Unknown .1.3.6.1.4.1.838.3.43.2.2.2 |
More MIBs from Xedia
Browse all XediaMIBs →The XEDIA-SYSTEM-MIB provides SNMP objects to monitor and manage system-level parameters, including hardware status, resource utilization, and operational state, specifically for Xedia embedded networking devices.
The XEDIA-NETWORK-ADDRESS-TRANSLATOR-MIB provides management objects for monitoring and configuring Xedia's proprietary Network Address Translator (NAT) devices, enabling the tracking of translation sessions, address pool utilization, and packet flow statistics between RFC1918 private networks and the public Internet.
The XEDIA-POLICY-MIB enables SNMP-based configuration and monitoring of routing policy definitions, including match conditions, action sets, and policy application states, specifically within Xedia networking hardware. This module provides granular visibility into the operational status and parameter values of traffic steering rules to facilitate automated policy enforcement and troubleshooting.
The XEDIA-IPSEC-MIB enables monitoring and configuration of Xedia IPsec VPN tunnel states, security associations, and cryptographic parameters on Xedia networking hardware. It provides specific objects for tracking tunnel establishment status, packet counters, and IPsec policy enforcement metrics to ensure secure data transmission integrity.
The XEDIA-IP-MIB extends standard IETF IP-MIB functionality to monitor and manage IP-layer parameters, interfaces, and routing statistics specifically within Xedia hardware platforms. This module provides vendor-specific object identifiers for tracking IP traffic counters, interface states, and protocol configurations on Xedia network devices.
The XEDIA-NETWORK-TIME-PROTOCOL-MIB enables monitoring of Xedia's RFC 1305-compliant Network Time Protocol (NTP) implementation to manage UTC synchronization states, server association parameters, and time offset metrics across network hosts.