X25-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for X25-MIB.
142
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
142 total| Object Name |
|---|
ngcan OBJECT IDENTIFIER .1.3.6.1.4.1.1978 |
IMPORTS Unknown .1.3.6.1.4.1.1978 |
tiger OBJECT IDENTIFIER .1.3.6.1.4.1.1978.2 |
x25MIB OBJECT IDENTIFIER .1.3.6.1.4.1.1978.2.14 |
x25L3 OBJECT IDENTIFIER .1.3.6.1.4.1.1978.2.14.1 |
x25AdmnTableThis table contains configuration, channel assignments
and statistics for an X.25 Packet Level Entity (PLE).
The values are as last set by the administrator and/or
the values actually in use by the PLE. SEQUENCE OF X25AdmnEntry .1.3.6.1.4.1.1978.2.14.1.1 |
x25AdmnEntryEntries of x25AdmnTable. X25AdmnEntry .1.3.6.1.4.1.1978.2.14.1.1.1 |
x25AdmnIndexThe ifIndex value for the X.25 Interface.rw InterfaceIndex .1.3.6.1.4.1.1978.2.14.1.1.1.1 |
x25AdmnInterfaceModeIdentifies DCE/DTE mode in which the interface operates.
A value of dxe indicates the mode will be determined by XID
negotiation.rw Enumeration .1.3.6.1.4.1.1978.2.14.1.1.1.2 |
x25AdmnPacketSequencingThe modulus of the packet sequence number space.rw Enumeration .1.3.6.1.4.1.1978.2.14.1.1.1.3 |
x25AdmnRestartTimerThe T20 restart timer in milliseconds.
UNITS: millisecondsrw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.4 |
x25AdmnCallTimerThe T21 Call timer in milliseconds.
UNITS: millisecondsrw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.5 |
x25AdmnResetTimerThe T22 Reset timer in milliseconds.
UNITS: millisecondsrw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.6 |
x25AdmnClearTimerThe T23 Clear timer in milliseconds.
UNITS: millisecondsrw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.7 |
x25AdmnWindowTimerThe T24 window status transmission timer in milliseconds.
A value of 0 indicates no window timer in use.
UNITS: millisecondsrw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.8 |
x25AdmnDataRxmtTimerThe T25 data retransmission timer in milliseconds.
A value of 0 indicates no data retransmission timer in use.
UNITS: millisecondsrw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.9 |
x25AdmnInterruptTimerThe T26 interrupt timer in milliseconds.
A value of 0 indicates no interrupt timer in use.
UNITS: millisecondsrw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.10 |
x25AdmnRejectTimerThe T27 Reject retransmission timer in milliseconds.
A value of 0 indicates no reject timer in use.
UNITS: millisecondsrw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.11 |
x25AdmnRegistrationRequestTimerThe T28 registration timer in milliseconds.
A value of 0 indicates no registration timer in use.
UNITS: millisecondsrw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.12 |
x25AdmnRestartCountThe R20 restart retransmission count.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.13 |
x25AdmnResetCountThe r22 Reset retransmission count.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.14 |
x25AdmnClearCountThe r23 Clear retransmission count.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.15 |
x25AdmnDataRxmtCountThe R25 Data retransmission count. This value is irrelevant
if the x25AdmnDataRxmtTimer indicates no timer in use.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.16 |
x25AdmnRejectCountThe R27 reject retransmission count. This value is
irrelevant if the x25AdmnRejectTimer indicates no timer in use.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.17 |
x25AdmnRegistrationRequestCountThe R28 Registration retransmission Count. This value is irrelevant
if the x25AdmnRegistrationRequestTimer indicates no timer in use.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.18 |
x25AdmnNumberPVCsThe number of PVC configured for this PLE. The PVCs use channel
numbers from 1 to this number. Set to 0 for no PVCs.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.19 |
x25AdmnDefCallParamIdThis identifies the instance of the x25CallParmIndex for the entry in
the x25CallParmTable which contains the default call parameters for this PLE.rw X25CallParamIndex .1.3.6.1.4.1.1978.2.14.1.1.1.20 |
x25AdmnProtocolVersionSupportedIdentifies the version of the X.25 protocol this interface should support.rw Enumeration .1.3.6.1.4.1.1978.2.14.1.1.1.21 |
x25AdmnRegistrationModeDefines how registration exchanges are handled.
A value of auto indicates that the DTE always sends
empty request at connection time and that a DCE automatically
answers incoming requests. A value of user indicates that registration
packets are handled at the user level and the packet level still updates
its internal configuration according to the the confirmation content.rw Enumeration .1.3.6.1.4.1.1978.2.14.1.1.1.22 |
x25AdmnDiagnosticModeControls the generation of diagnostic packets.
A value of standard means send diagnostics if configured as a DCE
only, as per CCITT specification. A value of on always sends diagnostic
packets, and a value of off will never send diagnostic packets.rw Enumeration .1.3.6.1.4.1.1978.2.14.1.1.1.23 |
x25AdmnInterruptSizeDefines the maximum user data size in interrupt packets.
Use 1 for networks compliant with 1980 CCITT recommendation
and before, use 32 for 1984 and later compliant networks,
any other value is used only when dealing with non CCITT
compliant implementations.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.24 |
x25AdmnMaxTxWindowSpecifies the maximum transmit window size that can be negotiated.
1 through 7 for modulo 8.
1 through 128 for modulo 128.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.25 |
x25AdmnMaxRxWindowSpecifies the maximum receive window size that can be negotiated.
1 through 7 for modulo 8.
1 through 128 for modulo 128.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.26 |
x25AdmnFacilityLengthDefines the maximum length of the Facility field.
Use 63 for 1980 or earlier complience.
Use 109 for 1984 and later compliant networks.
Other value are used only when dealing with non CCITT
compliant implementations.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.27 |
x25AdmnCallDataSizeDefines the maximum length of the user data in call
request/indication packets when fast select not used.
Use 16 for CCITT complience.
Other value are used only when dealing with non CCITT
compliant implementations.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.28 |
x25AdmnFastSelectCallDataSizeDefines the maximum length of the user data in call
request/indication packets when fast select is used.
Use 128 for CCITT complience.
Other value are used only when dealing with non CCITT compliant implementations.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.29 |
x25AdmnExtendedClearControls support for extended clear format (allow addresses and
facilities in clear/clear cf packets).
A value of on means that the extended clear format is supported.
A value of off means that the extended clear is not supported,
receipt from the user is an error.
A value of convert means accept extended clears from the user but
convert them to short format before transmission to the network,
accept whatever the network sends us.
Note: The extended format is used in a clear if fast select is
present in the facility field, no matter what the setting
of this parameter is.rw Enumeration .1.3.6.1.4.1.1978.2.14.1.1.1.30 |
x25AdmnCauseControls how a cause field from the user is converted.
A value of asis means send the user cause as is. A value of
ccitt-80 means convert to 1980 format (clear if DTE, cause & 0x07F
if DCE). A value of ccitt-84 means use 1984 format (0 or
cause | 0x80 if DTE, cause & 0x07F if DCE). A value of clear means
always clear the cause fields from the user.rw Enumeration .1.3.6.1.4.1.1978.2.14.1.1.1.31 |
x25AdmnABitx25AdmnABit defines how long addresses, (up to 17 digits,) are handled.
A value of on, means always use the long address format.
A value of off, means always use the short address format.
A value of ok, means use the long format, but accept short
addresses from the network.rw Enumeration .1.3.6.1.4.1.1978.2.14.1.1.1.32 |
x25AdmnRRTriggerThis defines when the frame level sends RR.
0: Only send RR when the window is full. Very inefficient
as it always causes the remote to enter flow control
situations. Not recommended.
1: Send RR when receiving one mode data packet would make
the window full. Suggested value on modulo 7 point-to- point
links with small transit delays.
>=k: If the value of the parameter is greater than the window
size, this causes RR packets to always be transmitted
immediately as soon as a data packet is received. To
obtain this mode of operation whatever the negitiated
window size may be, it is suggested to set the value of
this parameter to 128.
< k: Use the specified value,
256: This special value causes RR packets transmission to occur
whenever the receive window is half full.
Where k is the value of lapbAdmnKWindowSize.
(default = >=k)rw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.33 |
x25AdmnRRTimerThis x25AdmnRRTimer only causes the transmission of an
RR Packet when there are outstanding packets to acknowledge
to the remote. When the transmission of RR packets to the
remote is delayed because the x25AdmnRRTrigger value is
set to a value within the receive window, this timer is used
to force the transmission of RR packets after some time. Without
this timer, delaying RR Packets would cause the last packets
of a transaction never to be acknowledged.
Please note that this timer is not similar to the T24 timer.
The T24 timer causes an RR packet to be sent whenever no packet
carrying an ack has been sent for a while. In addition, the
duration of T24 is typically fairly large (60 seconds recommended),
while this RR timer should be much smaller to ensure that packets
are always acknowledged in a reasonable amount of time.
Note: The time is in milliseconds.
Note: Setting x25AdmnRRTrigger to a value outside of the
receive window or setting this timer value to 0 force
RR packets to always be transmitted as soon as a data
packet is received from the remote without any delay.
UNITS: millisecondsrw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.34 |
x25AdmnRRPiggyThis specifies whether the frame level can
'piggyback' acknowledgements in I frames.rw Enumeration .1.3.6.1.4.1.1978.2.14.1.1.1.35 |
x25AdmnTxRejectModeDefines how packet level handles the reception of out of
sequence data packets.
A value of reset will reset the virtual circuit.
A value of rejectReset will send reject packet if configured as a DTE.
otherwise it will reset the virtual circuit.
A value of sendAlways will cause a reject packet to always be sent,
even when configured as a DCE.
Note: CCITT compliance requires the selection of either reset or rejectReset.
The CCITT does not allow a DCE to send a reject.rw Enumeration .1.3.6.1.4.1.1978.2.14.1.1.1.36 |
x25AdmnRxRejectModeDefines how packet level handles the reception of reject packets.
A value of reset will reset the virtual circuit.
A value of retxReset will retransmit packets if configured as a DCE.
otherwise it will reset the virtual circuit.
A value of retxAlways will cause retransmition of data packets
even when configured as a DTE.
Note: CCITT compliance requires the selection of either reset or retxReset.
The CCITT does not allow a DTE to retransmit.rw Enumeration .1.3.6.1.4.1.1978.2.14.1.1.1.37 |
x25AdmnDBitDefines how packet level handles the D bit.
A value of no indicates that the use of the D bit not allowed.
A value of ok indicates that the use of the D bit is allowed.
A value of bill indicates that the use of the D bit is allowed
only if we are not billed for the call.rw Enumeration .1.3.6.1.4.1.1978.2.14.1.1.1.38 |
x25AdmnR28ActionSelects the packet level action after R28 expirations of the
registration timer T28.
A value of fail means the link is considered as non operational
and is disconnected. The x25AdmnRegistrationMode parameter
determine if the complete reconnection procedure is tried again.
A value of ignore means: Go to the ready state using the default link
configuration, as if the registration never occurred.rw Enumeration .1.3.6.1.4.1.1978.2.14.1.1.1.39 |
x25ChannelLICLowest Incoming channel.
A value of 0 indicates that no LCN is available.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.40 |
x25ChannelHICHighest Incoming channel.
A value of 4095 indicates that no LCN is available.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.41 |
x25ChannelLTCLowest Two-way channel.
A value of 0 indicates that no LCN is available.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.42 |
x25ChannelHTCHighest Two-way channel.
A value of 0 indicates that no LCN is available.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.43 |
x25ChannelLOCLowest outgoing channel.
A value of 0 indicates that no LCN is available.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.44 |
x25ChannelHOCHighest outgoing channel.
A value of 0 indicates that no LCN is available.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.1.1.45 |
x25StatInCallsThe number of Call Request/Indication packets received.ro Counter .1.3.6.1.4.1.1978.2.14.1.1.1.46 |
x25StatInCallRefusalsThe number of incoming calls refused. This includes calls refused by
the PLE and by higher layers. This also includes calls cleared because
of restricted fast select.ro Counter .1.3.6.1.4.1.1978.2.14.1.1.1.47 |
x25StatInProviderInitiatedClearsThe number of Clear Request/Indication packets sent.ro Counter .1.3.6.1.4.1.1978.2.14.1.1.1.48 |
x25StatInRemotelyInitiatedResetsThe number of Reset Request/Indication packets received.ro Counter .1.3.6.1.4.1.1978.2.14.1.1.1.49 |
x25StatInProviderInitiatedResetsThe number of Reset Request/Indication packets sent.ro Counter .1.3.6.1.4.1.1978.2.14.1.1.1.50 |
x25StatInRestartsThe number of Restart Request/Indication packets received.ro Counter .1.3.6.1.4.1.1978.2.14.1.1.1.51 |
x25StatInDataPacketsThe number of data packets received.ro Counter .1.3.6.1.4.1.1978.2.14.1.1.1.52 |
x25StatInAccusedOfProtocolErrorsThe number of packets received containing a procedure error cause
code. These include clear, reset, restart, or diagnostic packets.ro Counter .1.3.6.1.4.1.1978.2.14.1.1.1.53 |
x25StatInInterruptsThe number of interrupt packets received by the PLE or over the PVC/VC.ro Counter .1.3.6.1.4.1.1978.2.14.1.1.1.54 |
x25StatOutCallAttemptsThe number of calls attempted.ro Counter .1.3.6.1.4.1.1978.2.14.1.1.1.55 |
x25StatOutCallFailuresThe number of call attempts which failed. This includes calls
that were cleared because of restrictive fast select.ro Counter .1.3.6.1.4.1.1978.2.14.1.1.1.56 |
x25StatOutInterruptsThe number of interrupt packets send by the PLE or over the PVC/VC.ro Counter .1.3.6.1.4.1.1978.2.14.1.1.1.57 |
x25StatOutDataPacketsThe number of data packets sent by this PLE.ro Counter .1.3.6.1.4.1.1978.2.14.1.1.1.58 |
x25StatPVCCircuitsThe number of active PVC circuits.ro Counter .1.3.6.1.4.1.1978.2.14.1.1.1.59 |
x25StatSVCCircuitsThe number of active SVC Circuits. This includes call indications
received but not yet acknowledged.ro Counter .1.3.6.1.4.1.1978.2.14.1.1.1.60 |
x25StatRestartTimeoutsThe number of times the T20 restart timer expired.ro Counter .1.3.6.1.4.1.1978.2.14.1.1.1.61 |
x25StatCallTimeoutsThe number of times the T21 call timer expired.ro Counter .1.3.6.1.4.1.1978.2.14.1.1.1.62 |
x25StatResetTimeoutsThe number of times the T22 reset timer expired.ro Counter .1.3.6.1.4.1.1978.2.14.1.1.1.63 |
x25StatClearTimeoutsThe number of times the T23 clear timer expired.ro Counter .1.3.6.1.4.1.1978.2.14.1.1.1.64 |
x25StatDataRxmtTimeoutsThe number of times the T25 data timer expired.ro Counter .1.3.6.1.4.1.1978.2.14.1.1.1.65 |
x25StatInterruptTimeoutsThe number of times the T26 interrupt timer expired.ro Counter .1.3.6.1.4.1.1978.2.14.1.1.1.66 |
x25StatRetryCountExceededsThe number of times a retry counter was exhausted.ro Counter .1.3.6.1.4.1.1978.2.14.1.1.1.67 |
x25StatClearCountExceededsThe number of times the R23 clear count was exceeded.ro Counter .1.3.6.1.4.1.1978.2.14.1.1.1.68 |
x25AdminTrapControlIf enabled, it allows the system to generate x25Restart and x25VC trapsrw Enumeration .1.3.6.1.4.1.1978.2.14.1.1.1.69 |
x25CircuitTableThese objects contain general information about a specific circuit of an X.25 PLE. SEQUENCE OF X25CircuitEntry .1.3.6.1.4.1.1978.2.14.1.2 |
x25CircuitEntryEntries of x25CircuitTable. X25CircuitEntry .1.3.6.1.4.1.1978.2.14.1.2.1 |
x25CircuitIndexThe ifIndex value for the X.25 Interface.ro InterfaceIndex .1.3.6.1.4.1.1978.2.14.1.2.1.1 |
x25CircuitChannelThe channel number for this circuit.ro INTEGER .1.3.6.1.4.1.1978.2.14.1.2.1.2 |
x25CircuitStatusThis object reports the current status of the circuit.
'Network' refers to the X.25 network below this module.
'User Application' refers to the software module above this module.
<User Application> - The software driving X.25 Level 3.
<X.25 Packet Level Module> - This module.
<Network> - LAPB
The state descriptions are as follows:
inactive - VC is not active.
wait-for-setup - VC is not active but ready for Call Setup.
received-call - Received Call Request/Indication from the Network,
awaiting User Application response.
sent-call - Sent the network a Call Request/Indication,
awaiting Network response.
data-unused - Data Transfer (unused)
call-collision - Call Collision - Sent the network a Call Request/Indication,
received Call Request/Indication from the Network.
sent-user-clear - Sent User Application a Clear request,
awaiting a Clear confirm from the User Application.
sent-net-clear - Sent the network a Clear Request/Indication,
awaiting a Clear Confirm/Response from the Network.
data - Data Transfer state.
sent-user-reset - Sent the User Application a Reset request,
awaiting a response from the User Application.
sent-net-reset - Sent the Network a Reset Request/Indication,
awaiting a response from the Network.ro Enumeration .1.3.6.1.4.1.1978.2.14.1.2.1.3 |
x25CircuitEstablishTimeThe value of sysUpTime when the channel was associated
with this circuit. For outgoing SVCs, this is the time
the first call packet was sent. For incoming SVCs, this
is the time the call indication was received. For PVCs
this is the time the PVC was able to pass data to a higher
layer entity without loss of data.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1978.2.14.1.2.1.4 |
x25CircuitDirectionThe direction of the call that established this circuit.ro Enumeration .1.3.6.1.4.1.1978.2.14.1.2.1.5 |
x25CircuitInOctetsThe number of octets of user data delivered to upper layer.ro Counter .1.3.6.1.4.1.1978.2.14.1.2.1.6 |
x25CircuitInPdusThe number of PDUs received for this circuit.ro Counter .1.3.6.1.4.1.1978.2.14.1.2.1.7 |
x25CircuitInRemotelyInitiatedResetsThe number of Resets received for this circuit with cause code of DTE initiated.ro Counter .1.3.6.1.4.1.1978.2.14.1.2.1.8 |
x25CircuitInProviderInitiatedResetsThe number of Resets received for this circuit with cause code other than DTE initiated.ro Counter .1.3.6.1.4.1.1978.2.14.1.2.1.9 |
x25CircuitInInterruptsThe number of interrupt packets received for this circuit.ro Counter .1.3.6.1.4.1.1978.2.14.1.2.1.10 |
x25CircuitOutOctetsThe number of octets of user data sent for this circuit.ro Counter .1.3.6.1.4.1.1978.2.14.1.2.1.11 |
x25CircuitOutPdusThe number of PDUs sent for this circuit.ro Counter .1.3.6.1.4.1.1978.2.14.1.2.1.12 |
x25CircuitOutInterruptsThe number of interrupt packets sent on this circuit.ro Counter .1.3.6.1.4.1.1978.2.14.1.2.1.13 |
x25CircuitDataRetransmissionTimeoutsThe number of times the T25 data retransmission timer expired for this circuit.ro Counter .1.3.6.1.4.1.1978.2.14.1.2.1.14 |
x25CircuitResetTimeoutsThe number of times the T22 reset timer expired for this circuit.ro Counter .1.3.6.1.4.1.1978.2.14.1.2.1.15 |
x25CircuitInterruptTimeoutsThe number of times the T26 Interrupt timer expired for this circuit.ro Counter .1.3.6.1.4.1.1978.2.14.1.2.1.16 |
x25CircuitCallParamIdThis identifies the instance of the x25CallParmIndex for the
entry in the x25CallParmTable which contains the call parameters
in use with this circuit. The entry referenced must contain the
values that are currently in use by the circuit rather than
proposed values. A value of NULL indicates the circuit is a PVC
or is using all the default parameters.ro INTEGER .1.3.6.1.4.1.1978.2.14.1.2.1.17 |
x25CircuitCalledAddressThe Called X.121 Address in the Incoming or Outgoing Call packets.ro X121Address .1.3.6.1.4.1.1978.2.14.1.2.1.18 |
x25CircuitCallingAddressThe Calling X.121 Address in the Incoming or Outgoing Call packets.ro X121Address .1.3.6.1.4.1.1978.2.14.1.2.1.19 |
x25CircuitOriginallyCalledAddressFor incoming calls, this is the address in the call Redirection
or Call Deflection Notification facility if the call was deflected
or redirected, otherwise it will be called address from the call
indication packet. For outgoing calls, this is the address from
the call request packet. This will be zero length for PVCs.ro X121Address .1.3.6.1.4.1.1978.2.14.1.2.1.20 |
x25CircuitDescrA descriptive string associated with this circuit. This provides a
place for the agent to supply any descriptive information it knows
about the use or owner of the circuit. The agent may return the
process identifier and user name for the process using the circuit.
Alternative the agent may return the name of the configuration entry
that caused a bridge to establish the circuit. A zero length value
indicates the agent doesn't have any additional information.rw DisplayString .1.3.6.1.4.1.1978.2.14.1.2.1.21 |
x25CircuitRNRReceiveThis element shows whether a receive RNR (from the network) condition exits.ro Enumeration .1.3.6.1.4.1.1978.2.14.1.2.1.22 |
x25CircuitRNRSentThis element shows whether a sent RNR (to the network) condition exits.ro Enumeration .1.3.6.1.4.1.1978.2.14.1.2.1.23 |
x25CircuitTrapTypeThe type of event that caused the trap to occur.
reset - generated whenever that packet type is sent or received.
clear - generated whenever that packet type is sent or received.
sent-rr2rnr - generated whenever an RNR packet is transmitted, causing
a flow control condition.
sent-rnr2rr - generated whenever an RR packet is transmitted ending
a flow control condition.
recv-rr2rnr - generated whenever an RNR packet is received, causing
a flow control condition.
recv-rnr2rr - generated whenever an RR packet is received ending
a flow control condition.ro Enumeration .1.3.6.1.4.1.1978.2.14.1.2.1.24 |
x25CircuitTrapCauseThe cause field of the message that caused the trap to occur.ro INTEGER .1.3.6.1.4.1.1978.2.14.1.2.1.25 |
x25CircuitTrapDiagnosticThe diagnostic field of the message that caused the trap to occur.ro INTEGER .1.3.6.1.4.1.1978.2.14.1.2.1.26 |
x25CallParmTableThese objects contain the parameters that can be varied between
X.25 calls. The entries in this table are independent of the PLE.
There exists only one of these tables for the entire system.
The indexes for the entries are independent of any PLE or any circuit.
Other tables reference entries in this table. Entries in this
table can be used for default PLE parameters, for parameters to use
to place/answer a call, for the parameters currently in use for a
circuit, or parameters that were used by a circuit.
The number of references to a given set of parameters can be found
in the x25CallParmRefCount object sharing the same instance identifier
with the parameters. The value of this reference count also affects
the access of the objects in this table. An object in this table with
the same instance identifier as the instance identifier of an
x25CallParmRefCount must be consider associated with that reference
count. An object with an associated reference count of zero can be
written (if its MAX-ACCESS clause allows it). An object with an associated
reference count greater than zero can not be written (regardless of
the MAX-ACCESS clause). This ensures that a set of call parameters being
referenced from another table can not be modified or changed in a ways
inappropriate for continued use by that table. SEQUENCE OF X25CallParmEntry .1.3.6.1.4.1.1978.2.14.1.3 |
x25CallParmEntryEntries of x25CallParmTable. X25CallParmEntry .1.3.6.1.4.1.1978.2.14.1.3.1 |
x25CallParmIndexA value that distinguishes this entry from another entry.
Entries in this table are referenced from other objects which
identify call parameters.
It is impossible to know which other objects in the MIB reference
entries in the table by looking at this table. Because of this,
changes to parameters must be accomplished by creating a new entry
in this table and then changing the referencing table to identify
the new entry.
Note that an agent will only use the values in this table when another
table is changed to reference those values. The number of other tables
that reference an index object in this table can be found in
x25CallParmRefCount. The value of the reference count will affect the
writability of the objects as explained above.
Entries in this table which have a reference count of zero maybe deleted
at the convence of the agent. Care should be taken by the agent to give
the NMS sufficient time to create a reference to newly created entries.
Should a Management Station not find a free index with which to create
a new entry, it may feel free to delete entries with a reference count
of zero. However in doing so the Management Station much realize it may
impact other Management Stations.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.3.1.1 |
x25CallParmStatusThe status of this call parameter entry. See RFC 1271 for details of usage.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1978.2.14.1.3.1.2 |
x25CallParmRefCountThe number of references know by a management station to exist
to this set of call parameters. This is the number of other
objects that have returned a value of, and will return a value
of, the index for this set of call parameters. Examples of such
objects is the x25AdmnDefCallParamId object defined above.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.3.1.3 |
x25CallParmInPacketSizeThe default receive packet size in octets for a circuit. A size of zero
for a circuit means use the PLE default size. A size of zero for the PLE
means use a default size of 128.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.3.1.4 |
x25CallParmOutPacketSizeThe default transmit packet size in octets for a circuit. A size of zero
for a circuit means use the PLE default size. A size of zero for the PLE
default means use a default size of 128.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.3.1.5 |
x25CallParmInWindowSizeThe receive window size for a circuit.
A size of zero for a circuit means use the PLE default size.
A size of zero for the PLE default means use 2.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.3.1.6 |
x25CallParmOutWindowSizeThe transmit window size for a circuit.
A size of zero for a circuit means use the PLE default size.
A size of zero for the PLE default means use 2.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.3.1.7 |
x25CallParmAcceptReverseChargingAn enumeration defining if the PLE will accept or refuse charges.
A value of default for a circuit means use the PLE default value.
A value of alwaysRefuse is only used for the PLE default and
indicates the PLE will never accept reverse charging.
A value of default for a PLE default means refuse.rw Enumeration .1.3.6.1.4.1.1978.2.14.1.3.1.8 |
x25CallParmProposeReverseChargingAn enumeration defining if the PLE should propose reverse or local charging.
The value of default for a circuit means use the PLE default.
The value of default for the PLE default means use local.rw Enumeration .1.3.6.1.4.1.1978.2.14.1.3.1.9 |
x25CallParmFastSelectExpresses preference for use of fast select facility.
The value of default for a circuit is the PLE default.
A value of default for the PLE means alwaysReject.
A value of alwaysReject indicates a circuit may not use fast select.rw Enumeration .1.3.6.1.4.1.1978.2.14.1.3.1.10 |
x25CallParmInThruPutClasSizeThe incoming throughput class to negotiate.
A value of tcDefault for a circuit means use the PLE default.
A value of tcDefault for the PLE default means tcNone.
A value of tcNone means do not negotiate throughtput class.rw Enumeration .1.3.6.1.4.1.1978.2.14.1.3.1.11 |
x25CallParmOutThruPutClasSizeThe outgoing throughput class to negotiate.
A value of tcDefault for a circuit means use the PLE default.
A value of tcDefault for the PLE default means use tcNone.
A value of tcNone means do not negotiate throughtput class.rw Enumeration .1.3.6.1.4.1.1978.2.14.1.3.1.12 |
x25CallParmCugThe Closed User Group to specify.
This consists of two or four octets containing the characters 0 through 9.
A zero length string indicates no facility requested.
A string length of three containing the characters DEF for a circuit means use
the PLE default, (the PLE default parameter may not reference an entry of DEF.)rw DisplayString .1.3.6.1.4.1.1978.2.14.1.3.1.13 |
x25CallParmCugoaThe Closed User Group with Outgoing Access to specify. This
consists of two or four octets containing the characters 0 through
9. A string length of three containing the characters DEF for a
circuit means use the PLE default (the PLE default parameters may
not reference an entry of DEF). A zero length string indicates no
facility requested.rw DisplayString .1.3.6.1.4.1.1978.2.14.1.3.1.14 |
x25CallParmBcugThe Bilateral Closed User Group to specify. This consists of two
octets containing the characters 0 through 9. A string length of
three containing the characters DEF for a circuit means use the PLE
default (the PLE default parameter may not reference an entry of DEF).
A zero length string indicates no facility requested.rw DisplayString .1.3.6.1.4.1.1978.2.14.1.3.1.15 |
x25CallParmNuiThe Network User Identifier facility. This is binary value to be
included immediately after the length field. The PLE will supply the
length octet. A zero length string indicates no facility requested.
This value is ignored for the PLE default parameters entry.rw OCTET STRING .1.3.6.1.4.1.1978.2.14.1.3.1.16 |
x25CallParmChargingInfoThe charging Information facility.
A value of default for a circuit means use the PLE default.
The value of default for the default PLE parameters means use noFacility.
The value of noFacility means do not include a facility.rw Enumeration .1.3.6.1.4.1.1978.2.14.1.3.1.17 |
x25CallParmRpoaThe RPOA facility. The octet string contains n * 4 sequences of
the characters 0-9 to specify a facility with n entries. The octet
string containing the 3 characters DEF for a circuit specifies use
of the PLE default (the entry for the PLE default may not contain
DEF). A zero length string indicates no facility requested.rw DisplayString .1.3.6.1.4.1.1978.2.14.1.3.1.18 |
x25CallParmTrnstDlyThe Transit Delay Selection and Indication value.
A value of 65536 indicates no facility requested.
A value of 65537 for a circuit means use the PLE default
(the PLE default parameters entry may not use the value 65537).
The value 65535 may only be used to indicate the value in use by a circuit.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.3.1.19 |
x25CallParmCallingExtThe Calling Extension facility. This contains one of the following:
A sequence of hex digits with the value to be put in the facility.
These digits will be converted to binary by the agent and put in the
facility. These octets do not include the length octet.
A value containing the three character DEF for a circuit means use the
PLE default, (the entry for the PLE default parameters may not use the
value DEF).
A zero length string indicates no facility requested.rw DisplayString .1.3.6.1.4.1.1978.2.14.1.3.1.20 |
x25CallParmCalledExtThe Called Extension facility. This contains one of the following:
A sequence of hex digits with the value to be put in the facility.
These digits will be converted to binary by the agent and put in the
facility. These octets do not include the length octet.
A value containing the three character DEF for a circuit means use the
PLE default, (the entry for the PLE default parameters may not use the
value DEF).
A zero length string indicates no facility requested.rw DisplayString .1.3.6.1.4.1.1978.2.14.1.3.1.21 |
x25CallParmInMinThuPutClsThe minimum input throughput Class. A value of 17 for a circuit means
use the PLE default (the PLE parameters entry may not use this value).
A value of 16 indicates no facility requested.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.3.1.22 |
x25CallParmOutMinThuPutClsThe minimum output throughput Class. A value of 17 for a circuit means
use the PLE default (the PLE parameters entry may not use this value).
A value of 16 indicates no facility requested.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.3.1.23 |
x25CallParmEndTrnsDlyThe End-to-End Transit Delay to negotiate. An octet string of length
2, 4, or 6 contains the facility encoded as specified in ISO/IEC 8208
section 15.3.2.4. An octet string of length 3 containing the three
character DEF for a circuit means use the PLE default (the entry for
the PLE default can not contain the characters DEF). A zero length
string indicates no facility requested.rw OCTET STRING .1.3.6.1.4.1.1978.2.14.1.3.1.24 |
x25CallParmPriorityThe priority facility to negotiate. The octet string encoded
as specified in ISO/IEC 8208 section 15.3.2.5. A zero length
string indicates no facility requested. The entry for the PLE
default parameters must be zero length.rw OCTET STRING .1.3.6.1.4.1.1978.2.14.1.3.1.25 |
x25CallParmProtectionA string contains the following:
A hex string containing the value for the protection facility.
This will be converted from hex to the octets actually in the
packet by the agent. The agent will supply the length field
and the length octet is not contained in this string.
An string containing the 3 characters DEF for a circuit means
use the PLE default (the entry for the PLE default parameters
may not use the value DEF).
A zero length string mean no facility requested.rw DisplayString .1.3.6.1.4.1.1978.2.14.1.3.1.26 |
x25CallParmExptDataThe Expedited Data facility to negotiate. A value of default
for a circuit means use the PLE default value. The entry for
the PLE default parameters may not have the value default.rw Enumeration .1.3.6.1.4.1.1978.2.14.1.3.1.27 |
x25CallParmUserDataThe call user data as placed in the packet. A zero length
string indicates no call user data. If both the circuit call
parameters and the PLE default have call user data defined,
the data from the circuit call parameters will be used. If
only the PLE has data defined, the PLE entry will be used.
If neither the circuit call parameters or the PLE default
entry has a value, no call user data will be sent.rw OCTET STRING .1.3.6.1.4.1.1978.2.14.1.3.1.28 |
x25CallParmCallingNetworkFacilitiesThe calling network facilities. The facilities are encoded here
exactly as encoded in the call packet. These facilities do not
include the marker facility code.
A zero length string in the entry for the parameter to use when
establishing a circuit means use the PLE default. A zero length string
in the entry for PLE default parameters indicates no default facilities.rw OCTET STRING .1.3.6.1.4.1.1978.2.14.1.3.1.29 |
x25CallParmCalledNetworkFacilitiesThe called network facilities. The facilities are encoded here
exactly as encoded in the call packet. These facilities do not
include the marker facility code.
A zero length string in the entry for the parameter to use when
establishing a circuit means use the PLE default. A zero length string
in the entry for PLE default parameters indicates no default facilities.rw OCTET STRING .1.3.6.1.4.1.1978.2.14.1.3.1.30 |
x25CallParmInMaxPktSizeThe maximum receive packet size in octets for a circuit. A size of zero
for a circuit means use the PLE default size. A size of zero for the PLE
means use a default size of 128.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.3.1.31 |
x25CallParmOutMaxPktSizeThe maximum transmit packet size in octets for a circuit. A size of zero
for a circuit means use the PLE default size. A size of zero for the PLE
default means use a default size of 128.rw INTEGER .1.3.6.1.4.1.1978.2.14.1.3.1.32 |
x25Traps OBJECT IDENTIFIER .1.3.6.1.4.1.1978.2.14.2 |
x25L3Traps OBJECT IDENTIFIER .1.3.6.1.4.1.1978.2.14.2.1 |
x25RestartThis trap means the X.25 PLE completed a link restart packet has been sent and:
a) a restart packet was received (Restart Collision)
b) a restart confirm packet was received.
c) the Restart retransmission counter (R20) expires.
The packet module now considers the link to be established and ready
for Virtual Circuit establishment. TRAP-TYPE .1.3.6.1.4.1.1978.2.14.2.1.0.1 |
x25VCSent if a virtual circuit needs to send a trap for one of its reasons listed in x25CircuitTrapType. TRAP-TYPE .1.3.6.1.4.1.1978.2.14.2.1.0.2 |