WYSE-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for WYSE-MIB.
282
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
282 total| Object Name |
|---|
wyse OBJECT IDENTIFIER .1.3.6.1.4.1.714 |
RFC1213-MIB Unknown .1.3.6.1.4.1.714 |
Product OBJECT IDENTIFIER .1.3.6.1.4.1.714.1 |
Old OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.1 |
Wysenet OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.1.1 |
ThinClient OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2 |
wbt3 OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3 |
wbt3TrapDHCPBuildMismatchFirmware build number mismatch according to information
supplied by DHCP server. TRAP-TYPE .1.3.6.1.4.1.714.1.2.3.0.1 |
wbt3TrapDHCPUpdDoneFirmware upgrade initiated due to build number mismatch according
to DHCP information is done. TRAP-TYPE .1.3.6.1.4.1.714.1.2.3.0.2 |
wbt3TrapDHCPUpdNotCompleteFirmware upgrade initiated due to build number mismatch
according to DHCP information is not completed for some reason. TRAP-TYPE .1.3.6.1.4.1.714.1.2.3.0.3 |
wbt3TrapSNMPAccptLdReady to accept up/download request initiated by SNMP manager. TRAP-TYPE .1.3.6.1.4.1.714.1.2.3.0.4 |
wbt3TrapSNMPLdDoneSNMP initiated up/download request is done. TRAP-TYPE .1.3.6.1.4.1.714.1.2.3.0.5 |
wbt3TrapSNMPLdNotCompleteSNMP initiated up/download request is not completed for some reason. TRAP-TYPE .1.3.6.1.4.1.714.1.2.3.0.6 |
wbt3TrapRebootNotCompleteSNMP initiated reboot request is not completed for some reason. TRAP-TYPE .1.3.6.1.4.1.714.1.2.3.0.7 |
wbt3Memory OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.1 |
wbt3Ram OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.1.1 |
wbt3RamNumThe number of Ram presents in this systemro INTEGER .1.3.6.1.4.1.714.1.2.3.1.1.1 |
wbt3RamTableA list of Ram entries, number of entries is given by the
value of wbt3RamNum SEQUENCE OF wbt3RamEntry .1.3.6.1.4.1.714.1.2.3.1.1.2 |
wbt3RamEntryA Ram entity present in this system wbt3RamEntry .1.3.6.1.4.1.714.1.2.3.1.1.2.1 |
wbt3RamIndexA unique value for each Ram entity present in this system.
Its value ranges between 1 and the value of wbt3RamNumro INTEGER .1.3.6.1.4.1.714.1.2.3.1.1.2.1.1 |
wbt3RamTypeThe type of Ram
Currently defined numbers are:
base(1)
video(2)
extend(3)ro Enumeration .1.3.6.1.4.1.714.1.2.3.1.1.2.1.2 |
wbt3RamSizeTotal size of this ram entity in bytesro INTEGER .1.3.6.1.4.1.714.1.2.3.1.1.2.1.3 |
wbt3Rom OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.1.2 |
wbt3RomNumThe number of Rom entity presents in this systemro INTEGER .1.3.6.1.4.1.714.1.2.3.1.2.1 |
wbt3RomTableA list of Rom entries, number of entries is given by the
value of wbt3RomNum SEQUENCE OF wbt3RomEntry .1.3.6.1.4.1.714.1.2.3.1.2.2 |
wbt3RomEntryA Rom entity present in this system wbt3RomEntry .1.3.6.1.4.1.714.1.2.3.1.2.2.1 |
wbt3RomIndexA unique value for each Rom entity present in this system.
Its value ranges between 1 and the value of wbt3RomNumro INTEGER .1.3.6.1.4.1.714.1.2.3.1.2.2.1.1 |
wbt3RomTypeThe type of Rom
Currently defined numbers are:
boot(1)
os(2)
option(3)ro Enumeration .1.3.6.1.4.1.714.1.2.3.1.2.2.1.2 |
wbt3RomSizeTotal size of this Rom entity in bytesro INTEGER .1.3.6.1.4.1.714.1.2.3.1.2.2.1.3 |
wbt3PCCard OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.2 |
wbt3PCCardNumThe number of PCCard slots presents in this systemro INTEGER .1.3.6.1.4.1.714.1.2.3.2.1 |
wbt3PCCardTableA list of PCCard entries, number of entries is given by the
value of wbt3PCCardNum SEQUENCE OF wbt3PCCardEntry .1.3.6.1.4.1.714.1.2.3.2.2 |
wbt3PCCardEntryA PCCard slot present in this system wbt3PCCardEntry .1.3.6.1.4.1.714.1.2.3.2.2.1 |
wbt3PCCardIndexA unique value for each PCCard slot present in this system.
Its value ranges between 1 and the value of wbt3PCCardNumro INTEGER .1.3.6.1.4.1.714.1.2.3.2.2.1.1 |
wbt3PCCardTypeThe type of PCCard card currently plugged in this PCCard slot.
Currently defined numbers are:
empty(65535),
multifunction(0),
memory(1),
modem(2),
parallel_port(3),
fixed_disk(4),
video_adaptor(5),
lan_adapter(6),
AIMS(7)ro Enumeration .1.3.6.1.4.1.714.1.2.3.2.2.1.2 |
wbt3PCCardVendorA textual description of the vendor of the PCCard card currently
plugged in this slot. e.g. 'Eicon DIVA PC Card'ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.2.2.1.3 |
wbt3IODevice OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.3 |
wbt3IODevAttachedA 32bit value which indicates the input devices currently
attached to the unit.
bit 0 - set if keyboard attached
bit 1 - set if mouse driver loaded
bit 2 - set if micro touch screen attached
bit 3 - set if elo touch screen attached
bit 4 - set if lightpen attached
bit 5 - set if floppy drive attachedro INTEGER .1.3.6.1.4.1.714.1.2.3.3.1 |
wbt3kbLanguageThe language setting for the keyboard attached to this terminalrw Enumeration .1.3.6.1.4.1.714.1.2.3.3.2 |
wbt3CharacterRepeatDelayIndicates the delay time between each character.rw Enumeration .1.3.6.1.4.1.714.1.2.3.3.3 |
wbt3CharacterRepeatRateIndicates repeat rate between each character in the range of 0 to 31 at 1 interval.rw INTEGER .1.3.6.1.4.1.714.1.2.3.3.4 |
wbt3Display OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.4 |
wbt3DispCharacteristic OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.4.1 |
wbt3DispFreqA 8bit value which indicates the current display frequency in Hz.
Available display frequency values for Leo: 60/75/85 Hz,
for Mars/Midway: 60/75 Hz.
wbt3DispFreq can not be set if use DDC is on.rw INTEGER .1.3.6.1.4.1.714.1.2.3.4.1.1 |
wbt3DispHorizPixA 16bit value which indicates the current number of horizontal pixels.
Available display horizontal pixel values
for Leo: 640/800/1024/1280 (1280 only with 60 Hz) pixels,
for Mars/Midway: 640/800/1024.
wbt3DispHorizPix can not be set if use DDC is on.rw INTEGER .1.3.6.1.4.1.714.1.2.3.4.1.2 |
wbt3DispVertPixA 16bit value which indicates the current number of vertical pixels.
Available display vertical pixel values
for Leo: 480/600/768/1024 (1024 only with 60 Hz) pixels,
for Mars/Midway: 480/600/768.
wbt3DispVertPix can not be set if use DDC is on.rw INTEGER .1.3.6.1.4.1.714.1.2.3.4.1.3 |
wbt3DispColorCurrent display color depthro INTEGER .1.3.6.1.4.1.714.1.2.3.4.1.4 |
wbt3DispUseDDCAutomatic select the best available resolution and refresh rate.
If selected Yes, the wbt3DispHorizPix, wbt3VertPix and wbt3DispFreq
options can not be set.
Use DDC is not available for Mars platform.rw Enumeration .1.3.6.1.4.1.714.1.2.3.4.1.5 |
wbt3DispCapability OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.4.2 |
wbt3DispFreqMaxA 8bit value which indicates the display frequency in Hz for maximum resolutionro INTEGER .1.3.6.1.4.1.714.1.2.3.4.2.1 |
wbt3DispHorizPixMaxA 16bit value which indicates the maximum number of horizontal pixelsro INTEGER .1.3.6.1.4.1.714.1.2.3.4.2.2 |
wbt3DispVertPixMaxA 16bit value which indicates the maximum number of vertical pixelsro INTEGER .1.3.6.1.4.1.714.1.2.3.4.2.3 |
wbt3DispColorMaxMaximum display color depthro INTEGER .1.3.6.1.4.1.714.1.2.3.4.2.4 |
wbt3EnergySaverIndicates which energy saver is in use.rw Enumeration .1.3.6.1.4.1.714.1.2.3.4.3 |
wbt3ScreenTimeOutIndicates the time (in minutes) of non-activity to trigger
the screen saver.rw INTEGER .1.3.6.1.4.1.714.1.2.3.4.4 |
wbt3TouchScreenIf the terminal has a touch screen, indicates to which port it is attachedrw Enumeration .1.3.6.1.4.1.714.1.2.3.4.5 |
wbt3DhcpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.5 |
wbt3DhcpInfoNumThe number of entries in DHCP information table, this number equals to the number
of currently initialized network interfaces (exclude loopback) in the terminalro INTEGER .1.3.6.1.4.1.714.1.2.3.5.1 |
wbt3DhcpInfoTableA list of DHCP information table entry, Each entry lists the information
obtained from DHCP server through a specific network interface in the terminal.
The number of entries is given by the value of wbt3DhcpInfoNum SEQUENCE OF wbt3DhcpInfoEntry .1.3.6.1.4.1.714.1.2.3.5.2 |
wbt3DhcpInfoEntryAn interface with a DHCP information table entry on this system wbt3DhcpInfoEntry .1.3.6.1.4.1.714.1.2.3.5.2.1 |
wbt3DhcpInfoIndexA unique value for this DHCP information table, Its value ranges
between 1 and the value of wbt3DhcpInfoNum.ro INTEGER .1.3.6.1.4.1.714.1.2.3.5.2.1.1 |
wbt3InterfaceNumThe interface number through which the dhcp info is obtainedro INTEGER .1.3.6.1.4.1.714.1.2.3.5.2.1.2 |
wbt3ServerIPWinFrame/WTS Server IP address, (Option 155)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.5.2.1.3 |
wbt3Username1Account to logon to WinFrame/WTS Server, (Option 156)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.5.2.1.4 |
wbt3DomainDomain to authenticate account defined by wbt3Username, (Option 157)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.5.2.1.5 |
wbt3Password0=No Password;1=Has Password, (Option 158)ro Enumeration .1.3.6.1.4.1.714.1.2.3.5.2.1.6 |
wbt3CommandLineApplication to use when connecting to a WinFrame/WTS Server, (Option 159)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.5.2.1.7 |
wbt3WorkingDirWorking Directory for application defined by wbt3CommandLine, (Option 160)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.5.2.1.8 |
wbt3FileServerFile server where ROM images are located, (Option 161)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.5.2.1.9 |
wbt3FileRootPathAbsolute path name for ROM image parent directory, (Option 162)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.5.2.1.10 |
wbt3TrapServerListA list of host IPs which should receive SNMP trap from the terminal (Option 163)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.5.2.1.11 |
wbt3SetCommunitySNMP Set Community (Option 164):
0 - dhcp supplied set community is ignored,
local configuration takes precedence;
1 - provided by DHCP server and being used;
2 - not provided by DHCP server, default set community is usedro Enumeration .1.3.6.1.4.1.714.1.2.3.5.2.1.12 |
wbt3RDPstartAppRDP option: Startup Application (Default Option 165)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.5.2.1.13 |
wbt3EmulationModeTerminal Emulation option: Emulation Mode (Default Option 166)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.5.2.1.14 |
wbt3TerminalIDTerminal Emulation option: Terminal ID (Default Option 167)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.5.2.1.15 |
wbt3VirtualPortServerVirtual Port option: Virtual Port Server (Default Option 168)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.5.2.1.16 |
wbt3DHCPoptionIDs OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.5.3 |
RemoteServerCommon option: Remote Server (Default Option 155)rw INTEGER .1.3.6.1.4.1.714.1.2.3.5.3.1 |
LogonUserNameCommon option: Logon User Name (Default Option 156)rw INTEGER .1.3.6.1.4.1.714.1.2.3.5.3.2 |
DomainCommon option: Domain (Default Option 157)rw INTEGER .1.3.6.1.4.1.714.1.2.3.5.3.3 |
PasswordCommon option: Login Password (Default Option 158)rw INTEGER .1.3.6.1.4.1.714.1.2.3.5.3.4 |
CommandLineCommon option: Command Line (Default Option 159)rw INTEGER .1.3.6.1.4.1.714.1.2.3.5.3.5 |
WorkingDirectoryCommon option: Working Directory (Default Option 160)rw INTEGER .1.3.6.1.4.1.714.1.2.3.5.3.6 |
RDPStartupAppRDP option: Startup Application (Default Option 165)rw INTEGER .1.3.6.1.4.1.714.1.2.3.5.3.7 |
FTPFileServerFTP option: File Server (Default Option 161)rw INTEGER .1.3.6.1.4.1.714.1.2.3.5.3.8 |
FTPRootPathFTP option: File Root Path (Default Option 162)rw INTEGER .1.3.6.1.4.1.714.1.2.3.5.3.9 |
TrapServerListSNMP option: Trap Server IP List (Default Option 163)rw INTEGER .1.3.6.1.4.1.714.1.2.3.5.3.10 |
SetCommunitySNMP option: Set Community (Default Option 164)rw INTEGER .1.3.6.1.4.1.714.1.2.3.5.3.11 |
EmulationModeTerminal Emulation option: Emulation Mode (Default Option 166)rw INTEGER .1.3.6.1.4.1.714.1.2.3.5.3.12 |
TerminalIDTerminal Emulation option: Terminal ID (Default Option 167)rw INTEGER .1.3.6.1.4.1.714.1.2.3.5.3.13 |
VirtualPortServerVirtual Port option: Virtual Port Server (Default Option 168)rw INTEGER .1.3.6.1.4.1.714.1.2.3.5.3.14 |
wbt3BuildInfo OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.6 |
wbt3CurrentInfo OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.6.1 |
wbt3CurInfoNumNumber of rom images reside in the terminal currently, include main & applicationro INTEGER .1.3.6.1.4.1.714.1.2.3.6.1.1 |
wbt3CurInfoTableA table of build info for each rom image, number of entries
is given by the value of wbt3CurInfoNum SEQUENCE OF wbt3CurInfoEntry .1.3.6.1.4.1.714.1.2.3.6.1.2 |
wbt3CurInfoEntryA rom image present in this terminal wbt3CurInfoEntry .1.3.6.1.4.1.714.1.2.3.6.1.2.1 |
wbt3CurInfoIndexA unique value for this rom image. Its value ranges between
1 and the value of wbt3CurInfoNum..ro INTEGER .1.3.6.1.4.1.714.1.2.3.6.1.2.1.1 |
wbt3CurBuildNumBuild number of a rom image currently on the terminalro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.6.1.2.1.2 |
wbt3CurOEMBuildNumBuild number of flash ROM image currently on the terminal for OEMro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.6.1.2.1.3 |
wbt3CurModBuildDateDate that ROM image currently on the terminal was createdro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.6.1.2.1.4 |
wbt3CurOEMName of OEM who's ROM image is defined by wbt3OEMBuildNumro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.6.1.2.1.5 |
wbt3CurHWPlatformOS installed on the terminalro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.6.1.2.1.6 |
wbt3CurOSOS installed on the terminalro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.6.1.2.1.7 |
wbt3DhcpUpdateInfo OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.6.2 |
wbt3DUpInfoNumNumber of rom images reside in the terminal currently, include main & applicationro INTEGER .1.3.6.1.4.1.714.1.2.3.6.2.1 |
wbt3DUpInfoTableA table of build info for each rom image, number of entries
is given by the value of wbt3DUpInfoNum SEQUENCE OF wbt3DUpInfoEntry .1.3.6.1.4.1.714.1.2.3.6.2.2 |
wbt3DUpInfoEntryA rom image present in this terminal wbt3DUpInfoEntry .1.3.6.1.4.1.714.1.2.3.6.2.2.1 |
wbt3DUpInfoIndexA unique value for this rom image. Its value ranges between
1 and the value of wbt3DUpInfoNum..ro INTEGER .1.3.6.1.4.1.714.1.2.3.6.2.2.1.1 |
wbt3DUpBuildNumBuild number of the updated ROM imagero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.6.2.2.1.2 |
wbt3DUpOEMBuildNumBuild number of the updated ROM image for OEMro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.6.2.2.1.3 |
wbt3DUpModBuildDateDate that update image was last modifiedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.6.2.2.1.4 |
wbt3DUpOEMBuildDateDate that update image was last modified for OEMro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.6.2.2.1.5 |
wbt3CustomFields OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.7 |
wbt3CustomField1First custom fieldrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.7.1 |
wbt3CustomField2Second custom fieldrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.7.2 |
wbt3CustomField3Third custom fieldrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.7.3 |
wbt3Administration OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.8 |
wbt3UpDnLoad OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.8.1 |
wbt3UpDnLoadNumThe number of entries in the Up/Download table,
Maximum value is 5rw INTEGER .1.3.6.1.4.1.714.1.2.3.8.1.1 |
wbt3UpDnLoadTableA list of files to be upload or download SEQUENCE OF wbt3UpDnLoadEntry .1.3.6.1.4.1.714.1.2.3.8.1.2 |
wbt3UpDnLoadEntryAn upload or download request entry from server wbt3UpDnLoadEntry .1.3.6.1.4.1.714.1.2.3.8.1.2.1 |
wbt3UpDnLoadIndexA unique value for the request entry. Its value
ranges between 1 and the value of wbt3UpDnLoadNum.rw INTEGER .1.3.6.1.4.1.714.1.2.3.8.1.2.1.1 |
wbt3UpDnLoadIdAn id number for this up/download request.
This number is used to match with WBT private trap which
will be sent to the server upon done with this up/download request.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.8.1.2.1.2 |
wbt3UpDnLoadOp0=an upload request;1=a download requestrw Enumeration .1.3.6.1.4.1.714.1.2.3.8.1.2.1.3 |
wbt3UpDnLoadSrcFileThe path and file name for source file to be up/downloaded.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.8.1.2.1.4 |
wbt3UpDnLoadDstFileThe path and file name where the up/downloaded file will be stored.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.8.1.2.1.5 |
wbt3UpDnLoadFileType0=binary;1=asciirw Enumeration .1.3.6.1.4.1.714.1.2.3.8.1.2.1.6 |
wbt3UpDnLoadProtocol0=ftp, 1=tftprw Enumeration .1.3.6.1.4.1.714.1.2.3.8.1.2.1.7 |
wbt3UpDnLoadFServerThe file server IP address (or name) to/from which the file is up/downloaded.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.8.1.2.1.8 |
wbt3UpDnLoadTimeFlag0=execute request immediatelyrw Enumeration .1.3.6.1.4.1.714.1.2.3.8.1.2.1.9 |
wbt3AcceptReqIndicate whether ThinClient is ready to accept SNMP up/down load requestrw Enumeration .1.3.6.1.4.1.714.1.2.3.8.1.3 |
wbt3SubmitLoadJobSetting this object to Ready(1) will kick off the up/download process
specified in wbt3UpDnLoadTablerw Enumeration .1.3.6.1.4.1.714.1.2.3.8.1.4 |
wbt3Action OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.8.2 |
wbt3RebootRequestSet this object to RebootNow to kick off a reboot on the thinclientrw Enumeration .1.3.6.1.4.1.714.1.2.3.8.2.1 |
wbt3ResetToFactoryDefaultReset the terminal to factory-default settings.
The terminal will be reboot after ResetNow is set.rw Enumeration .1.3.6.1.4.1.714.1.2.3.8.2.2 |
wbt3FTPsetting OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.8.3 |
wbt3ServerNameFile server name or IP address where the ROM images are located.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.8.3.1 |
wbt3DirectoryDirectory where the ROM images are located.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.8.3.2 |
wbt3UserIDUser identification to login to the file server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.8.3.3 |
wbt3Password2User password to login to the file server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.8.3.4 |
wbt3SavePasswordYes = to save the password permanently,
No = do not save the password.rw Enumeration .1.3.6.1.4.1.714.1.2.3.8.3.5 |
wbt3InfoLocationUseDHCPinfo = ServerName and Directory will be provided by DHCP server,
UseLocalinfo = ServerName and Directory will be provided using local settings.rw Enumeration .1.3.6.1.4.1.714.1.2.3.8.3.6 |
wbt3SNMPupdateTerminal firmware upgrade using SNMP.
Yes = SNMP update enable,
No = SNMP update disable.rw Enumeration .1.3.6.1.4.1.714.1.2.3.8.4 |
wbt3DHCPupdateTerminal firmware upgrade using DHCP.
Yes = DHCP automatic update enable,
No = DHCP automatic update disable.rw Enumeration .1.3.6.1.4.1.714.1.2.3.8.5 |
wbt3Security OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.8.7 |
wbt3SecurityEnableThis group box is used to enable terminal security and connection configuration access.
selecting enable terminal security, and deactivate the Hide Configure Tab function.
By default this function is disabledrw Enumeration .1.3.6.1.4.1.714.1.2.3.8.7.1 |
wbt3HideConfigTabThis function hides the Configure tab in the Winterm Connections Manager.
By default this function is not activated.rw Enumeration .1.3.6.1.4.1.714.1.2.3.8.7.2 |
wbt3FailOverEnableFailover is a connection feature that is enabled using the Security properties sheet.
Disabling this function activates the PingBeforeConnect function.
By default this function is enabled.rw Enumeration .1.3.6.1.4.1.714.1.2.3.8.7.3 |
wbt3MultipleConnectAllow multiple connections.
Select Yes to enable. By default this function is disabled.rw Enumeration .1.3.6.1.4.1.714.1.2.3.8.7.4 |
wbt3PingBeforeConnectSelect Yes to enable. By default this function is deactivated.
When FailOver is checked, PingBeforeConnect is grayed out,
since it is implied that Ping is always performed before
a connection is made.rw Enumeration .1.3.6.1.4.1.714.1.2.3.8.7.5 |
wbt3VerboseSelect Yes to enable the Verbose connection function. By default the box is disabled.
During the FailOver operation, user can see the status via a log window
by checking the Verbose checkbox.
The log window will show everything from first connection onward.rw Enumeration .1.3.6.1.4.1.714.1.2.3.8.7.6 |
wbt3AutoLoginEnableThe AutoLogin function is an automatic login function that does not use
a dialog box as a prompt to log you back into your terminal.
Whether you restart or log off, the AutoLogin dialog box displays,
counts five seconds, then returns you to the Winterm Connections Manager.rw Enumeration .1.3.6.1.4.1.714.1.2.3.8.7.7 |
wbt3AutoLoginUserNameThis field is activated by enabling AutoLogin Enable.
By default the field is blank.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.8.7.8 |
wbt3SingleButtonConnectSelect Yes to enable the function. By default the function is not activated.rw Enumeration .1.3.6.1.4.1.714.1.2.3.8.7.9 |
wbt3AutoFailRecoverySelect Yes to enable the function. By default the function is activated.rw Enumeration .1.3.6.1.4.1.714.1.2.3.8.7.10 |
wbt3TrapsInfo OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.9 |
wbt3TrapStatusCurrent trap status information.ro Enumeration .1.3.6.1.4.1.714.1.2.3.9.1 |
wbt3TrapReqIdThe SNMP up/down load request Id associated with current trapro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.9.2 |
wbt3TrapServers OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.9.3 |
wbt3TrapServer1Server name or IP address where the trap messages will be sent.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.9.3.1 |
wbt3TrapServer2Server name or IP address where the trap messages will be sent.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.9.3.2 |
wbt3TrapServer3Server name or IP address where the trap messages will be sent.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.9.3.3 |
wbt3TrapServer4Server name or IP address where the trap messages will be sent.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.9.3.4 |
wbt3MibRev OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.10 |
wbt3MibRevMajorThe major revision level of the MIB
The number for current version.ro INTEGER .1.3.6.1.4.1.714.1.2.3.10.1 |
wbt3MibRevMinorThe minor revision level of the MIB
The number for current version is 8.ro INTEGER .1.3.6.1.4.1.714.1.2.3.10.2 |
wbt3Network OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.11 |
wbt3NetworkNumThe number of entries in the Network table.ro INTEGER .1.3.6.1.4.1.714.1.2.3.11.1 |
wbt3NetworkTableA table of network configuration, number of entries
is given by the value of wbt3NetworkNum. SEQUENCE OF wbt3NetworkEntry .1.3.6.1.4.1.714.1.2.3.11.2 |
wbt3NetworkEntryA Network configuration presents in this terminal. wbt3NetworkEntry .1.3.6.1.4.1.714.1.2.3.11.2.1 |
wbt3NetworkIndexA unique value for the request entry. Its value
ranges between 1 and the value of wbt3NetworkIndex.ro INTEGER .1.3.6.1.4.1.714.1.2.3.11.2.1.1 |
wbt3dhcpEnableIndicates whether the terminal acquires its network parameters
through DHCP or uses the static parameters provided.rw Enumeration .1.3.6.1.4.1.714.1.2.3.11.2.1.2 |
wbt3NetworkAddressIP address persents in this terminal.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.11.2.1.3 |
wbt3SubnetMaskSubnet Mask presents in this terminal.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.11.2.1.4 |
wbt3GatewayDefault gateway IP address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.11.2.1.5 |
wbt3dnsEnableIndicates whether the terminal uses DNS to translate names to IP addresses.rw Enumeration .1.3.6.1.4.1.714.1.2.3.11.2.1.6 |
wbt3defaultDomainIndicates the domain in which the terminal belongs.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.11.2.1.7 |
wbt3primaryDNSserverIPaddressThe IP address of the primary name server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.11.2.1.8 |
wbt3secondaryDNSserverIPaddressThe IP address of the secondary name server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.11.2.1.9 |
wbt3winsEnableIndicates whether the terminal uses WINS to resolve to IP addresses.rw Enumeration .1.3.6.1.4.1.714.1.2.3.11.2.1.10 |
wbt3primaryWINSserverIPaddressThe IP address of the primary name server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.11.2.1.11 |
wbt3secondaryWINSserverIPaddressThe IP address of the secondary name server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.11.2.1.12 |
wbt3NetworkSpeedIndicates the Network speed connection.(Not available for Mars)rw Enumeration .1.3.6.1.4.1.714.1.2.3.11.2.1.17 |
wbt3NetworkProtocolIndicates network protocol used.ro Enumeration .1.3.6.1.4.1.714.1.2.3.11.2.1.20 |
wbt3Apps OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.12 |
wbt3RDPencryptionTo enable/disable the RPD encryption.rw Enumeration .1.3.6.1.4.1.714.1.2.3.12.1 |
wbt3VirtualPortServerIPaddressSpecify the virtual port server address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.12.2 |
wbt3com1ShareTo enable/disable COM1 share.rw Enumeration .1.3.6.1.4.1.714.1.2.3.12.3 |
wbt3com2ShareTo enable/disable COM2 share.rw Enumeration .1.3.6.1.4.1.714.1.2.3.12.4 |
wbt3parallelShareTo enable/disable parallel share port.rw Enumeration .1.3.6.1.4.1.714.1.2.3.12.5 |
ICADefaultHotkeysICA Client Default HotKeys settings. SEQUENCE OF DefaultHotkeysEntry .1.3.6.1.4.1.714.1.2.3.12.6 |
DefaultHotkeysEntryDefault HotKeys entry. DefaultHotkeysEntry .1.3.6.1.4.1.714.1.2.3.12.6.1 |
ICAStatusDialogICAStatusDialogrw Enumeration .1.3.6.1.4.1.714.1.2.3.12.6.1.1 |
ICAStatusDialog2ICAStatusDialogrw Enumeration .1.3.6.1.4.1.714.1.2.3.12.6.1.2 |
ICACloseRemoteApplicationICAStatusDialogrw Enumeration .1.3.6.1.4.1.714.1.2.3.12.6.1.3 |
ICACloseRemoteApplication2ICAStatusDialogrw Enumeration .1.3.6.1.4.1.714.1.2.3.12.6.1.4 |
ICAtoggleTitleBarICAStatusDialogrw Enumeration .1.3.6.1.4.1.714.1.2.3.12.6.1.5 |
ICAtoggleTitleBar2ICAStatusDialogrw Enumeration .1.3.6.1.4.1.714.1.2.3.12.6.1.6 |
ICActrlAltDelICAStatusDialogrw Enumeration .1.3.6.1.4.1.714.1.2.3.12.6.1.7 |
ICActrlAltDel2ICAStatusDialogrw Enumeration .1.3.6.1.4.1.714.1.2.3.12.6.1.8 |
ICActrlEscICAStatusDialogrw Enumeration .1.3.6.1.4.1.714.1.2.3.12.6.1.9 |
ICActrlEsc2ICAStatusDialogrw Enumeration .1.3.6.1.4.1.714.1.2.3.12.6.1.10 |
ICAaltEscICAStatusDialogrw Enumeration .1.3.6.1.4.1.714.1.2.3.12.6.1.11 |
ICAaltEsc2ICAStatusDialogrw Enumeration .1.3.6.1.4.1.714.1.2.3.12.6.1.12 |
ICAaltTabICAStatusDialogrw Enumeration .1.3.6.1.4.1.714.1.2.3.12.6.1.13 |
ICAaltTab2ICAStatusDialogrw Enumeration .1.3.6.1.4.1.714.1.2.3.12.6.1.14 |
ICAaltBackTabICAStatusDialogrw Enumeration .1.3.6.1.4.1.714.1.2.3.12.6.1.15 |
ICAaltBackTab2ICAStatusDialogrw Enumeration .1.3.6.1.4.1.714.1.2.3.12.6.1.16 |
wbt3Connections OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.13 |
wbt3ConnectionsTableA list of connection entries. The number of entries is the number of existing connections
plus one. The last entry is a dummy entry reserved for new connection creation.
wbt3ConnectionName for this dummy entry is 'Not Defined'. SEQUENCE OF wbt3ConnectionEntry .1.3.6.1.4.1.714.1.2.3.13.2 |
wbt3ConnectionEntryA connection entry containing objects describing this connection.
wbt3ConnectionName is the instance identifier for wbt3ConnectionEntry wbt3ConnectionEntry .1.3.6.1.4.1.714.1.2.3.13.2.1 |
wbt3ConnectionNameName of the connection. This object is served as instance identifier for the connection entry.
Therefore value for this object must be unique among all entries. Maximum length depends on wbt3ConnectionType.
(37 for RDP wbt3ConnectionType; 32 for ICA wbt3ConnectionType;
42 for TEC wbt3ConnectionType; 20 for DialUp wbt3ConnectionType)rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.13.2.1.2 |
wbt3ConnectionTypeType of the connection.
This object can be modified when the associated wbt3ConnectionEntryStatus is notInService.rw Enumeration .1.3.6.1.4.1.714.1.2.3.13.2.1.3 |
wbt3ConnectionEntryStatusStatus of this connection entry. This object is used to manage the creation and deletion
of the wbt3ConnectionEntry. State machine for this object is compliant to RFC1903, definition
of textual conventions for RowStatus. This object may not be set to 'active' unless the
wbt3ConnectionName is set.
active - this is an existing connection saved in permanent storage. Values of fields within this
table entry are not allowed to modified while it is active. To modify fields within this table
entry, take the entry to 'notInService' state first.
notInService - this is a connection entry exists in the thinclient's temporary memory, but is
unavailable for use by the thinclient device. Entry must be put in this state before modification
to other fields (except wbt3ConnectionName) can be made. Changes to wbt3ConnectionName is NOT
allowed. To modify the name of an existing connection, delete the connection by setting
wbt3ConnectionEntryStatus to 'destroy', then create a new connection with the new name by following
the description for status 'notReady', 'createAndGo' or 'createAndWait' as specified below.
A management device has to set the wbt3ConnectionEntryStatus to 'active' to activate the
connection entry. Entries remaining in notInService state for an excessive period of time will
be removed to free up resource in the thinclient device. Entries in this state will not be retained
after reboot.
notReady - this is a dummy connection defined to facilitate creation of new entry.
An administrator can create a new connection by modifying wbt3ConnectionName of this entry to
a name which does not currently exist in wbt3ConnectionsTable. This will put the entry
in notInService state. An administrator can then put the connection in permanent storage by changing
wbt3ConnectionEntryStatus to 'active'.
Note that the assigned connection name CANNOT be an empty or 'Not Defined' string.
createAndGo - This status is supplied by a management station wishing to create a new instance
of a connection entry and to have its status automatically set to active, making it
available for use by the thinclient device. wbt3ConnectionName MUST be supplied in the same
PDU which set wbt3connectionEntryStatus to 'createAndGo'.
createAndWait - This status is supplied by a management station wishing to create a new instance
of a connection entry (but not make it immediately available for use by the thinclient device).
destroy - an administrator can delete an existing connection by setting this object of
target entry to 'destroy'.rw Enumeration .1.3.6.1.4.1.714.1.2.3.13.2.1.10 |
wbt3RDPConnections OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.13.3 |
wbt3RDPConnTableA table of connections, number of entries is the number of entries in
wbt3ConnectionTable which has wbt3ConnectionEntryStatus=active or notInService, and
wbt3ConnectionType=RDP. SEQUENCE OF wbt3RDPConnEntry .1.3.6.1.4.1.714.1.2.3.13.3.1 |
wbt3RDPConnEntryA RDP connection entry containing objects describing this connection.
wbt3RDPConnName is the instance identifier for wbt3RDPConnEntry wbt3RDPConnEntry .1.3.6.1.4.1.714.1.2.3.13.3.1.1 |
wbt3RDPConnNameName of the RDP connection. This object is served as instance identifier for the RDPConnEntry.
Value for this object is unique among all entries.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.13.3.1.1.1 |
wbt3RDPConnServerHost server name or IP address the RDP Client connects to. Maximum length is 32.
This object is modifiable only when wbt3RDPConnModifiable is 'Yes'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.13.3.1.1.2 |
wbt3RDPConnLowSpeedUsing low speed connection.
This object is modifiable only when wbt3RDPConnModifiable is 'Yes'.rw Enumeration .1.3.6.1.4.1.714.1.2.3.13.3.1.1.3 |
wbt3RDPConnAutoLogonEnable RDP automatic logon.
This object is modifiable only when wbt3RDPConnModifiable is 'Yes'.rw Enumeration .1.3.6.1.4.1.714.1.2.3.13.3.1.1.4 |
wbt3RDPConnUsernameSpecify the user name to atomatically logon to host. Maximum length is 32.
This object is modifiable only when wbt3RDPConnModifiable is 'Yes'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.13.3.1.1.5 |
wbt3RDPConnDomainDomain name of host server. Maximum length is 80.
This object is modifiable only when wbt3RDPConnModifiable is 'Yes'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.13.3.1.1.7 |
wbt3RDPConnStartApplicationSelect application starts up at connection.
0 = Desktop, 2 = select File name radio button.
This object is modifiable only when wbt3RDPConnModifiable is 'Yes'.rw Enumeration .1.3.6.1.4.1.714.1.2.3.13.3.1.1.8 |
wbt3RDPConnFilenameName of the application to start. Maximum length is 80.
This object is modifiable only when wbt3RDPConnModifiable is 'Yes'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.13.3.1.1.9 |
wbt3RDPConnWorkingDirApplication working directory. Maximum length is 80.
This object is modifiable only when wbt3RDPConnModifiable is 'Yes'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.13.3.1.1.10 |
wbt3RDPConnModifiableIndicate whether objects within this entry is modifiable currently.
Objects are modifiable if wbt3ConnectionEntryStatus of associated connection entry in
wbt3ConnectionsTable is in 'notInService'.ro Enumeration .1.3.6.1.4.1.714.1.2.3.13.3.1.1.30 |
wbt3ICAConnections OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.13.4 |
wbt3ICAConnTableA table of ICA connections, number of entries is the number of entries in
wbt3ConnectionTable which has wbt3ConnectionEntryStatus=active or notInService, and
wbt3ConnectionType=ICA. SEQUENCE OF wbt3ICAConnEntry .1.3.6.1.4.1.714.1.2.3.13.4.1 |
wbt3ICAConnEntryA ICA connection entry containing objects describing this connection.
wbt3ICAConnName is the instance identifier for wbt3ICAConnEntry wbt3ICAConnEntry .1.3.6.1.4.1.714.1.2.3.13.4.1.1 |
wbt3ICAConnNameName of the ICA connection. This object is served as instance identifier for the ICAConnEntry.
Value for this object is unique among all entries.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.13.4.1.1.1 |
wbt3ICAConnCommTypeCommunication media this connection uses.
This object is modifiable only when wbt3ICAConnModifiable is 'Yes'.rw Enumeration .1.3.6.1.4.1.714.1.2.3.13.4.1.1.2 |
wbt3ICAConnServerIP address or name of ICA server connect to. Maximum length is 63.
This object is modifiable only when wbt3ICAConnModifiable is 'Yes'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.13.4.1.1.3 |
wbt3ICAConnCommandLineCommand line to be launched once this ICA connection is brought up. Maximum length is 80.
This object is modifiable only when wbt3ICAConnModifiable is 'Yes'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.13.4.1.1.4 |
wbt3ICAConnWorkingDirWorking Directory to be used for this ICA. Maximum length is 80.
This object is modifiable only when wbt3ICAConnModifiable is 'Yes'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.13.4.1.1.5 |
wbt3ICAConnUsernameUser name to be used to log on to ICA server. Maximum length is 19.
This object is modifiable only when wbt3ICAConnModifiable is 'Yes'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.13.4.1.1.6 |
wbt3ICAConnDomainDomain name to be used to log on to ICA server. Maximum length is 16.
This object is modifiable only when wbt3ICAConnModifiable is 'Yes'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.13.4.1.1.8 |
wbt3ICAConnColorsSpecify 16/256 window colors.
This object is modifiable only when wbt3ICAConnModifiable is 'Yes'.rw Enumeration .1.3.6.1.4.1.714.1.2.3.13.4.1.1.9 |
wbt3ICAConnDataCompressEnable/Disable Data compression for this ICA session.
This object is modifiable only when wbt3ICAConnModifiable is 'Yes'.rw Enumeration .1.3.6.1.4.1.714.1.2.3.13.4.1.1.10 |
wbt3ICAConnSoundQualitySet sound quality for this ICA session, None to disable sound.
This object is modifiable only when wbt3ICAConnModifiable is 'Yes'.rw Enumeration .1.3.6.1.4.1.714.1.2.3.13.4.1.1.11 |
wbt3ICAConnModifiableIndicate whether objects within this entry is modifiable currently.
Objects are modifiable if wbt3ConnectionEntryStatus of associated connection entry in
wbt3ConnectionsTable is in 'notInService'.ro Enumeration .1.3.6.1.4.1.714.1.2.3.13.4.1.1.30 |
wbt3TermConnections OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.13.5 |
wbt3TermConnTableA table of Terminal Emulation connections, number of entries is the number of entries in
wbt3ConnectionTable which has wbt3ConnectionEntryStatus=active or notInService, and
wbt3ConnectionType=TEC. SEQUENCE OF wbt3TermConnEntry .1.3.6.1.4.1.714.1.2.3.13.5.1 |
wbt3TermConnEntryA terminal emulation connection entry containing objects describing this connection.
wbt3TermConnName is the instance identifier for wbt3TermConnEntry wbt3TermConnEntry .1.3.6.1.4.1.714.1.2.3.13.5.1.1 |
wbt3TermConnNameA unique name for the Terminal Emulation configuration entry. Maximum length is 42ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.13.5.1.1.1 |
wbt3TermConnCommTypeCommunication media this connection uses.
This object is modifiable only when wbt3TermConnModifiable is 'Yes'.rw Enumeration .1.3.6.1.4.1.714.1.2.3.13.5.1.1.2 |
wbt3TermConnServerIP address or host name of terminal server connect to. Maximum length is 60.
This object is modifiable only when wbt3TermConnModifiable is 'Yes'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.13.5.1.1.3 |
wbt3TermConnEmuTypeEmulation mode for this connection.
This object is modifiable only when wbt3TermConnModifiable is 'Yes'.rw Enumeration .1.3.6.1.4.1.714.1.2.3.13.5.1.1.4 |
wbt3TermConnVTEmuModelTerminal model uses for this connection. This field represents the VT Terminal ID.
This object is modifiable only when wbt3TermConnModifiable is 'Yes'.rw Enumeration .1.3.6.1.4.1.714.1.2.3.13.5.1.1.5 |
wbt3TermConnIBM3270EmuModelIBM 3270 terminal emulation models.
This object is valid only when wbt3TermConnEmuType = IBM3270.
This object is modifiable only when wbt3TermConnModifiable is 'Yes'.rw Enumeration .1.3.6.1.4.1.714.1.2.3.13.5.1.1.6 |
wbt3TermConnIBM5250EmuModelIBM 5250 terminal emulation models.
This object is valid only when wbt3TermConnEmuType = IBM5250.
This object is modifiable only when wbt3TermConnModifiable is 'Yes'.rw Enumeration .1.3.6.1.4.1.714.1.2.3.13.5.1.1.7 |
wbt3TermConnPortNumberTelnet port number used for this connection.
This object is modifiable only when wbt3TermConnModifiable is 'Yes'.rw INTEGER .1.3.6.1.4.1.714.1.2.3.13.5.1.1.10 |
wbt3TermConnTelnetNameName of this telnet session. Maximum length is 39.
This object is modifiable only when wbt3TermConnModifiable is 'Yes'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.13.5.1.1.11 |
wbt3TermConnPrinterPortPrinter port assigned to this connection.
This object is modifiable only when wbt3TermConnModifiable is 'Yes'.rw Enumeration .1.3.6.1.4.1.714.1.2.3.13.5.1.1.12 |
wbt3TermConnFormFeedUse Form Feed terminator for printing.
This object is modifiable only when wbt3TermConnModifiable is 'Yes'.rw Enumeration .1.3.6.1.4.1.714.1.2.3.13.5.1.1.13 |
wbt3TermConnAutoLineFeedUse Auto line Feed for printing.
This object is modifiable only when wbt3TermConnModifiable is 'Yes'.rw Enumeration .1.3.6.1.4.1.714.1.2.3.13.5.1.1.14 |
wbt3TermConnScriptScript for this terminal emulation.
Script syntax:
Use back slash (\) to separate between 2 script commands,
each script command has 2 entries (Act on and Send),
Use semi column (;) to separate 2 entries.
Samples: Login;<CR> or
Login;<CR><D>\Username,<U>
Send entry syntax: C.return = <CR> Delay (2s) = <D> Line Feed = <LF>
Password = <PW> Pause (0.255) = <P> UserName = <UN>.
Maximum length is 256.
This object is modifiable only when wbt3TermConnModifiable is 'Yes'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.13.5.1.1.15 |
wbt3TermConnModifiableIndicate whether objects within this entry is modifiable currently.
Objects are modifiable if wbt3ConnectionEntryStatus of associated connection entry in
wbt3ConnectionsTable is in 'notInService'.ro Enumeration .1.3.6.1.4.1.714.1.2.3.13.5.1.1.30 |
wbt3Users OBJECT IDENTIFIER .1.3.6.1.4.1.714.1.2.3.14 |
wbt3UsersTableA list of user accounts. The number of entries is the number of existing user accounts
plus one. The last entry is a dummy entry reserved for new user account creation.
wbt3userName for this dummy entry is 'Not Defined'. SEQUENCE OF wbt3UsersEntry .1.3.6.1.4.1.714.1.2.3.14.2 |
wbt3UsersEntryA user account entry containing objects describing this user.
wbt3userName is the instance identifier for wbt3UsersEntry wbt3UsersEntry .1.3.6.1.4.1.714.1.2.3.14.2.1 |
wbt3UsersStatusStatus of this user account entry. This object is used to manage the creation and deletion
of the wbt3UsersEntry. State machine for this object is compliant to RFC1903, definition
of textual conventions for RowStatus. This object may not be set to 'active' unless the
wbt3UserName is set.
active - this is an existing user account saved in permanent storage. Values of fields within this
table entry are not allowed to modified while it is active. To modify fields within this table
entry, take the entry to 'notInService' state first.
notInService - this is a user account entry exists in the thinclient's temporary memory, but is
unavailable for use by the thinclient device. Entry must be put in this state before modification
to other fields (except wbt3UserName) can be made. Changes to wbt3UserName is NOT
allowed. To modify the name of an existing user account, delete the user account by setting
wbt3UsersStatus to 'destroy', then create a new user account with the new name by following
the description for status 'notReady', 'createAndGo' or 'createAndWait' as specified below.
A management device has to set the wbt3UsersStatus to 'active' to activate the
user account. Entries remaining in notInService state for an excessive period of time will
be removed to free up resource in the thinclient device. Entries in this state will not be retained
after reboot.
notReady - this is a dummy user account defined to facilitate creation of new entry.
An administrator can create a new user account by modifying wbt3UserName of this entry to
a name which does not currently exist in wbt3UsersTable. This will put the entry
in notInService state. An administrator can then put the user account in permanent storage by changing
wbt3UsersStatus to 'active'.
Note that the assigned user account name CANNOT be an empty or 'Not Defined' string.
createAndGo - This status is supplied by a management station wishing to create a new instance
of a user account and to have its status automatically set to active, making it
available for use by the thinclient device. wbt3UserName MUST be supplied in the same
PDU which set wbt3UsersStatus to 'createAndGo'.
createAndWait - This status is supplied by a management station wishing to create a new instance
of a user account. (but not make it immediately available for use by the thinclient device).
destroy - an administrator can delete an existing user account by setting this object of
target entry to 'destroy'. Note that the default administrator account with name 'Administrator'
that is built in to the terminal cannot be deleted.rw Enumeration .1.3.6.1.4.1.714.1.2.3.14.2.1.2 |
wbt3userNameName of this user. This object is served as instance identifier for the user account entry.
Therefore value for this object must be unique among all entries. Maximum length is 20.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.14.2.1.3 |
wbt3password1The password for this user account. Maximum length is 20.
This object can be modified only when the associated wbt3UsersStatus is 'notInService'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.14.2.1.4 |
wbt3privilegeIndicates whether the user has extended, normal, or
restricted rights on this terminal.
Note that the privilege of the default administrator account (with name 'Administrator') cannot
be modifed.
For all other accounts, this object can be modified only when the associated wbt3UsersStatus
is 'notInService'.rw Enumeration .1.3.6.1.4.1.714.1.2.3.14.2.1.5 |
wbt3Connection1Name of a connection associated with this user. The connection name has to match the value
in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable that is in an 'active' state.
That is, the connection specified has to exist and be currently activated.
Set this object to an empty string to dis-associate a connection from the user.
For a user account that has Administrator privilege, all existing connections are associated with
the user automatically. Therefore this object is not modifiable if wbt3privilege is 'Admin'.
For accounts with User or Guest privilege, this object can be modified only when the associated
wbt3UsersStatus is 'notInService'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.14.2.1.7 |
wbt3Connection2Name of a connection associated with this user. The connection name has to match the value
in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable that is in an 'active' state.
That is, the connection specified has to exist and be currently activated.
Set this object to an empty string to dis-associate a connection from the user.
For a user account that has Administrator privilege, all existing connections are associated with
the user automatically. Therefore this object is not modifiable if wbt3privilege is 'Admin'.
For accounts with User or Guest privilege, this object can be modified only when the associated
wbt3UsersStatus is 'notInService'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.14.2.1.8 |
wbt3Connection3Name of a connection associated with this user. The connection name has to match the value
in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable that is in an 'active' state.
That is, the connection specified has to exist and be currently activated.
Set this object to an empty string to dis-associate a connection from the user.
For a user account that has Administrator privilege, all existing connections are associated with
the user automatically. Therefore this object is not modifiable if wbt3privilege is 'Admin'.
For accounts with User or Guest privilege, this object can be modified only when the associated
wbt3UsersStatus is 'notInService'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.14.2.1.9 |
wbt3Connection4Name of a connection associated with this user. The connection name has to match the value
in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable that is in an 'active' state.
That is, the connection specified has to exist and be currently activated.
Set this object to an empty string to dis-associate a connection from the user.
For a user account that has Administrator privilege, all existing connections are associated with
the user automatically. Therefore this object is not modifiable if wbt3privilege is 'Admin'.
For accounts with User or Guest privilege, this object can be modified only when the associated
wbt3UsersStatus is 'notInService'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.14.2.1.10 |
wbt3Connection5Name of a connection associated with this user. The connection name has to match the value
in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable that is in an 'active' state.
That is, the connection specified has to exist and be currently activated.
Set this object to an empty string to dis-associate a connection from the user.
For a user account that has Administrator privilege, all existing connections are associated with
the user automatically. Therefore this object is not modifiable if wbt3privilege is 'Admin'.
For accounts with User or Guest privilege, this object can be modified only when the associated
wbt3UsersStatus is 'notInService'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.14.2.1.11 |
wbt3Connection6Name of a connection associated with this user. The connection name has to match the value
in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable that is in an 'active' state.
That is, the connection specified has to exist and be currently activated.
Set this object to an empty string to dis-associate a connection from the user.
For a user account that has Administrator privilege, all existing connections are associated with
the user automatically. Therefore this object is not modifiable if wbt3privilege is 'Admin'.
For accounts with User or Guest privilege, this object can be modified only when the associated
wbt3UsersStatus is 'notInService'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.14.2.1.12 |
wbt3Connection7Name of a connection associated with this user. The connection name has to match the value
in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable that is in an 'active' state.
That is, the connection specified has to exist and be currently activated.
Set this object to an empty string to dis-associate a connection from the user.
For a user account that has Administrator privilege, all existing connections are associated with
the user automatically. Therefore this object is not modifiable if wbt3privilege is 'Admin'.
For accounts with User or Guest privilege, this object can be modified only when the associated
wbt3UsersStatus is 'notInService'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.14.2.1.13 |
wbt3Connection8Name of a connection associated with this user. The connection name has to match the value
in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable that is in an 'active' state.
That is, the connection specified has to exist and be currently activated.
Set this object to an empty string to dis-associate a connection from the user.
For a user account that has Administrator privilege, all existing connections are associated with
the user automatically. Therefore this object is not modifiable if wbt3privilege is 'Admin'.
For accounts with User or Guest privilege, this object can be modified only when the associated
wbt3UsersStatus is 'notInService'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.714.1.2.3.14.2.1.14 |
wbt3AutoStart1Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection1
object when the user logs on. This object cannot be modified if wbt3Connection1 is empty string.
Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.rw Enumeration .1.3.6.1.4.1.714.1.2.3.14.2.1.15 |
wbt3AutoStart2Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection2
object when the user logs on. This object cannot be modified if wbt3Connection2 is empty string.
Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.rw Enumeration .1.3.6.1.4.1.714.1.2.3.14.2.1.16 |
wbt3AutoStart3Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection3
object when the user logs on. This object cannot be modified if wbt3Connection3 is empty string.
Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.rw Enumeration .1.3.6.1.4.1.714.1.2.3.14.2.1.17 |
wbt3AutoStart4Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection4
object when the user logs on. This object cannot be modified if wbt3Connection4 is empty string.
Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.rw Enumeration .1.3.6.1.4.1.714.1.2.3.14.2.1.18 |
wbt3AutoStart5Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection5
object when the user logs on. This object cannot be modified if wbt3Connection5 is empty string.
Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.rw Enumeration .1.3.6.1.4.1.714.1.2.3.14.2.1.19 |
wbt3AutoStart6Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection6
object when the user logs on. This object cannot be modified if wbt3Connection6 is empty string.
Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.rw Enumeration .1.3.6.1.4.1.714.1.2.3.14.2.1.20 |
wbt3AutoStart7Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection7
object when the user logs on. This object cannot be modified if wbt3Connection7 is empty string.
Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.rw Enumeration .1.3.6.1.4.1.714.1.2.3.14.2.1.21 |
wbt3AutoStart8Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection8
object when the user logs on. This object cannot be modified if wbt3Connection8 is empty string.
Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.rw Enumeration .1.3.6.1.4.1.714.1.2.3.14.2.1.22 |
wbt3UserPasswordChangeIndicates this user has privilege to change the password.
For administrator, the password change is always on and cannot be set.
For guest account, the password change is always off and cannot be set.
For user account, the password change can be set on/off.
Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.rw Enumeration .1.3.6.1.4.1.714.1.2.3.14.2.1.23 |