WIPIPE-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
70
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
70 total| Object Name |
|---|
wipipe OBJECT IDENTIFIER .1.3.6.1.4.1.20992 |
RFC1155-SMI Unknown .1.3.6.1.4.1.20992 |
wipipeMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.20992.1 |
wipipeDevice OBJECT IDENTIFIER .1.3.6.1.4.1.20992.1.1 |
devFWVersionA textual description providing the firmware
version currently running on the device.
It is mandatory that this only contain
printable ASCII characters.
@GET-FUNC=snmp_get_devFWVersionro DisplayString .1.3.6.1.4.1.20992.1.1.1 |
devFWUpgradeInitiate a FW upgrade on the device.
none - No upgrade is being performed or initiated.
auto - If no other upgrade is begin performed, when this value
is written then an automatic upgrade will be performed.
When an automatic upgrade is done then the device will
pull the most current FW image from the Wipipe server
and install it.
If this value is read then the router is performing an
automatic upgrade and the devFWUpgradeStatus object should
be read for further information.
manual - If no other upgrade is begin performed, when this value
is written then a manual upgrade will be performed.
When an manual upgrade is done it will use the URL set
in the devFWUpgradeURL object as the place to get the
firmware image and install. If the devFWUpgradeURL object
is not set then no upgrade will be performed.
If this value is read then the router is performing an
manual upgrade and the devFWUpgradeStatus object should
be read for further information. -
@SET-FUNC=snmp_set_devFWUpgrade
@GET-FUNC=snmp_get_devFWUpgraderw Enumeration .1.3.6.1.4.1.20992.1.1.2 |
devFWUpgradeURLSet the URL that points to the firmware image that will be used
when doing a manual firmware upgrade.
@SET-FUNC=snmp_set_devFWUpgradeURL
@GET-FUNC=snmp_get_devFWUpgradeURLrw DisplayString .1.3.6.1.4.1.20992.1.1.3 |
devFWUpgradeStatusShow the result of the FW upgrade command.
idle = there is no upgrade in process.
upgrading = the new FW is being downloaded and written to flash.
uptodate = the device is already at the latest FW. Nothing to upgrade.
updateAvail - the device has an automatic update available.
failure = some sort of failure occurred during the upgrade.
The FW will not be upgraded.
NOTE - while the FW image is being written to flash interrupts are
disabled so no status will be returned at this time.
User should get the FW version string in order to determine if the
unit has been updated successfully.
@GET-FUNC=snmp_get_devFWUpgradeStatusro Enumeration .1.3.6.1.4.1.20992.1.1.4 |
devGpioConfigInputSet the Input GPIO config on the connector.
none - ignore input value.
input - read the input value.
reboot - if the input is held low for 10 seconds,
reboot the router.
ignition_sensing - if the input is held low for 300 seconds,
power off the router. IBR11x0 series feature.
@SET-FUNC=snmp_set_devGpioConfigInput
@GET-FUNC=snmp_get_devGpioConfigInputrw Enumeration .1.3.6.1.4.1.20992.1.1.5 |
devGpioReadInputRead the Input GPIO value on the connector.
0 - low.
1 - high.
@SET-FUNC=snmp_set_devGpioReadInput
@GET-FUNC=snmp_get_devGpioReadInputro INTEGER .1.3.6.1.4.1.20992.1.1.6 |
devGpioConfigOutputSet the output GPIO config on the connector.
low - Default low output value.
high - high output value.
routerRunning - high output value once the router completes
its boot process.
modemConnected - high output value when the modem completes a
data connection
@SET-FUNC=snmp_set_devGpioConfigOutput
@GET-FUNC=snmp_get_devGpioConfigOutputrw Enumeration .1.3.6.1.4.1.20992.1.1.7 |
devGpioReadOutputRead the Output GPIO value on the connector.
0 - low.
1 - high.
@SET-FUNC=snmp_set_devGpioReadOutput
@GET-FUNC=snmp_get_devGpioReadOutputro INTEGER .1.3.6.1.4.1.20992.1.1.8 |
wipipeCellMdm OBJECT IDENTIFIER .1.3.6.1.4.1.20992.1.2 |
mdmNumberThe number of Cellular Modems (regardless of their
current state) present on this system.
@GET-FUNC=snmp_get_mdmNumberro INTEGER .1.3.6.1.4.1.20992.1.2.1 |
mdmTableA list of Modem entries. The number of entries is
given by the value of ifNumber. SEQUENCE OF MdmEntry .1.3.6.1.4.1.20992.1.2.2 |
mdmEntryAn entry containing management information applicable to a
particular modem.
@ROW-FUNC=snmp_get_mdmTable_row MdmEntry .1.3.6.1.4.1.20992.1.2.2.1 |
mdmIndexA unique value, greater than zero, for each cellular modem. It
is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remain constant at least from one re-initialization of
the entity's network management system to the next re-
initialization.ro INTEGER .1.3.6.1.4.1.20992.1.2.2.1.1 |
mdmDescrA textual string containing information about the
modem.ro DisplayString .1.3.6.1.4.1.20992.1.2.2.1.2 |
mdmPortA textual string containing information about what
port the modem is installed in.ro DisplayString .1.3.6.1.4.1.20992.1.2.2.1.3 |
mdmSignalStrengthThe cellular modems signal strength, given in
dBm's.ro INTEGER (-120..-30) .1.3.6.1.4.1.20992.1.2.2.1.4 |
mdmStatusA textual string containing infomation of the state
of the modem.ro Enumeration .1.3.6.1.4.1.20992.1.2.2.1.5 |
mdmECIOThe cellular modems Ec/Io ratio given in dBm's.ro INTEGER (-120..0) .1.3.6.1.4.1.20992.1.2.2.1.6 |
mdmSerialNumberA textual string representing the unique serial number of the device.ro DisplayString .1.3.6.1.4.1.20992.1.2.2.1.7 |
mdmFirmwareVersionA textual string representing the current firmware version of the modem.
Not all modems report this value.ro DisplayString .1.3.6.1.4.1.20992.1.2.2.1.8 |
mdmMDNA textual string representing the unique Mobile Directory Number of the device.ro DisplayString .1.3.6.1.4.1.20992.1.2.2.1.9 |
mdmSERDISA textual string representing the Service Display of the device.ro DisplayString .1.3.6.1.4.1.20992.1.2.2.1.10 |
mdmPROFA textual string representing the Profile of the device.ro DisplayString .1.3.6.1.4.1.20992.1.2.2.1.11 |
mdmCINRThe cellular modems CINR ratio given in dBm's.ro INTEGER (-120..0) .1.3.6.1.4.1.20992.1.2.2.1.12 |
mdmSINRThe cellular modems SINR ratio given in dBm's.ro INTEGER (-20..40) .1.3.6.1.4.1.20992.1.2.2.1.13 |
mdmRSRPThe cellular modems RSRP given in dBm's.ro INTEGER (-120..100) .1.3.6.1.4.1.20992.1.2.2.1.14 |
mdmRSRQThe cellular modems RSRQ given in dBm's.ro INTEGER (-120..50) .1.3.6.1.4.1.20992.1.2.2.1.15 |
mdmROAMThe cellular modems Roaming Status.ro INTEGER .1.3.6.1.4.1.20992.1.2.2.1.16 |
mdmRFBANDThe cellular modems RF band.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20992.1.2.2.1.17 |
mdmHOMECARRIERThe cellular modems Home Carrier.ro DisplayString .1.3.6.1.4.1.20992.1.2.2.1.18 |
mdmIMSIThe cellular modems IMSI.ro DisplayString .1.3.6.1.4.1.20992.1.2.2.1.19 |
mdmIMEIThe cellular modems IMEI.ro DisplayString .1.3.6.1.4.1.20992.1.2.2.1.20 |
mdmAPNThe cellular modems APN.ro DisplayString .1.3.6.1.4.1.20992.1.2.2.1.21 |
mdmRFCHANNELThe cellular modems RF Channel.ro DisplayString .1.3.6.1.4.1.20992.1.2.2.1.22 |
wipipeProd OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2 |
mbr1000 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.1 |
ctr500 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.2 |
mbr800 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.3 |
mbr1100 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.4 |
mbr1200 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.5 |
mbr900 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.6 |
cba250 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.7 |
cba750 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.8 |
cx111 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.9 |
mbr1400 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.10 |
mbr1200b OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.11 |
cbr400 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.12 |
cbr450 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.13 |
ibr600 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.14 |
ibr650 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.15 |
mbr1400v2 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.16 |
cba750b OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.17 |
aer2100 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.18 |
ibr1150 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.19 |
ibr1100 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.20 |
cba850 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.21 |
ibr350 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.22 |
aer3100 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.23 |
aer1600 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.24 |
ibr650b OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.25 |
aer3150 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.26 |
aer1650 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.27 |
aer2150 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.28 |
ibr600b OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.29 |
ibr950 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.30 |
ibr900 OBJECT IDENTIFIER .1.3.6.1.4.1.20992.2.31 |