WAYSTREAM-MIB
AI MIB Summary
The WAYSTREAM-MIB module provides SNMP access to monitor and manage iBOS (Integrated Business Operations System) functionality and operational metrics on Waystream Access Service Routers (ASRs). It exposes specific counters and status variables related to ASR session states, interface statistics, and system resource utilization within the Waystream service provider infrastructure.
The Waystream MIB describing iBOS functionality of ASRs
Main OID:
ibos.1.3.6.1.4.1.9303.4.1
189
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
189 total| Object Name |
|---|
ibosThe Waystream MIB describing iBOS functionality of ASRs MODULE-IDENTITY .1.3.6.1.4.1.9303.4.1 |
wsSystemSystem management objects OBJECT IDENTIFIER .1.3.6.1.4.1.9303.4.1.1 |
wsWritedummyThis object is a read-write object that accept an integer. The value written has no effect on the system, but a successful write indicate that SNMP write operations are possible on the target router. The last written value can be read backrw Integer32 .1.3.6.1.4.1.9303.4.1.1.1 |
wsReloadThis object is used to restart the target router by setting the number of seconds until system reload. A value of 0 cancels any pending reload. The value returned when reading the object is the number of seconds remaining until reloadrw Integer32 .1.3.6.1.4.1.9303.4.1.1.2 |
wsVersionThe iBOS version indicatorro Integer32 .1.3.6.1.4.1.9303.4.1.1.3 |
wsAsrRevisionThe ASR hardware revisionro Integer32 .1.3.6.1.4.1.9303.4.1.1.4 |
wsVersionStringA textual representation of the iBOS version. For iBOS versions after 3.2, this field should be used to identify the iBOS version instead of the old wsVersion OIDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9303.4.1.1.5 |
wsEnvironmentEnvirontment data OBJECT IDENTIFIER .1.3.6.1.4.1.9303.4.1.2 |
wsIbosEnvironmentNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.9303.4.1.2.0 |
wsIbosTempLowA wsIbosTempLow trap signifies that the SNMP entity, acting in an agent role, has detected that one of its temperature sensors is outside of the predefined low threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.9303.4.1.2.0.1 |
wsIbosTempHighA wsIbosTempHigh trap signifies that the SNMP entity, acting in an agent role, has detected that one of its temperature sensors is outside of the predefined high threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.9303.4.1.2.0.2 |
wsIbosVoltLowA wsIbosVoltLow trap signifies that the SNMP entity, acting in an agent role, has detected that one of its voltage channels is outside of the predefined low threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.9303.4.1.2.0.3 |
wsIbosVoltHighA wsIbosVoltHigh trap signifies that the SNMP entity, acting in an agent role, has detected that one of its voltage channels is outside of the predefined high threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.9303.4.1.2.0.4 |
wsIbosFanRPMLowA wsIbosFanRPMLow trap signifies that the SNMP entity, acting in an agent role, has detected that one of its fans's RPM is lower than the system defined threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.9303.4.1.2.0.5 |
wsIbosFanOutVoltLowA wsIbosFanOutVoltLow trap signifies that the SNMP entity, acting in an agent role, has detected that its fan output voltage is lower than the system defined threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.9303.4.1.2.0.6 |
wsTempTableTable of values from temperature sensors. SEQUENCE OF WsTempEntry .1.3.6.1.4.1.9303.4.1.2.1 |
wsTempEntryAn entry for a temperature sensor. WsTempEntry .1.3.6.1.4.1.9303.4.1.2.1.1 |
wsTempSensorSensor number.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.2.1.1.1 |
wsTempMeasuredMeasured temperature in 100ths of degrees centigrade.ro Integer32 .1.3.6.1.4.1.9303.4.1.2.1.1.2 |
wsTempTOSTOS in 100ths of degrees centigrade.ro Integer32 .1.3.6.1.4.1.9303.4.1.2.1.1.3 |
wsTempTHYSTTHYST in 100ths of degrees centigrade.ro Integer32 .1.3.6.1.4.1.9303.4.1.2.1.1.4 |
wsTempThresholdLowThreshold (low) in 100ths of degrees centigrade.ro Integer32 .1.3.6.1.4.1.9303.4.1.2.1.1.5 |
wsTempThresholdHighThreshold (high) in 100ths of degrees centigrade.ro Integer32 .1.3.6.1.4.1.9303.4.1.2.1.1.6 |
wsTempStatusStatus (measurement compared to threshold).ro Enumeration .1.3.6.1.4.1.9303.4.1.2.1.1.7 |
wsVoltTableTable of measured board voltages. SEQUENCE OF WsVoltEntry .1.3.6.1.4.1.9303.4.1.2.2 |
wsVoltEntryAn entry for a board voltage. WsVoltEntry .1.3.6.1.4.1.9303.4.1.2.2.1 |
wsVoltChannelVoltage channel number.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.2.2.1.1 |
wsVoltNominalNominal voltage in mV for channel.ro Integer32 .1.3.6.1.4.1.9303.4.1.2.2.1.2 |
wsVoltMeasuredMeasured voltage in mV for channel.ro Integer32 .1.3.6.1.4.1.9303.4.1.2.2.1.3 |
wsVoltThresholdLowThreshold (low) voltage in mV for channel.ro Integer32 .1.3.6.1.4.1.9303.4.1.2.2.1.4 |
wsVoltThresholdHighThreshold (high) voltage in mV for channel.ro Integer32 .1.3.6.1.4.1.9303.4.1.2.2.1.5 |
wsVoltStatusStatus (measurement compared to threshold).ro Enumeration .1.3.6.1.4.1.9303.4.1.2.2.1.6 |
wsFanTableTable of measured rotation speeds for external fans. SEQUENCE OF WsFanEntry .1.3.6.1.4.1.9303.4.1.2.3 |
wsFanEntryAn entry for a fan. WsFanEntry .1.3.6.1.4.1.9303.4.1.2.3.1 |
wsFanNumberFan number.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.2.3.1.1 |
wsFanRPMFan speed in revolutions per minute.ro Integer32 .1.3.6.1.4.1.9303.4.1.2.3.1.2 |
wsFanVoltageFan driving voltage (in mV).ro Integer32 .1.3.6.1.4.1.9303.4.1.2.4 |
wsIbosEnvironmentTrapEnableProvides control over iBOS environment related traps.rw Enumeration .1.3.6.1.4.1.9303.4.1.2.5 |
wsPFDPPFDP data OBJECT IDENTIFIER .1.3.6.1.4.1.9303.4.1.3 |
wsNeighboursTableTable of discovered PFDB Neighbours. SEQUENCE OF WsNeighboursEntry .1.3.6.1.4.1.9303.4.1.3.1 |
wsNeighboursEntryAn entry for a neighbour. WsNeighboursEntry .1.3.6.1.4.1.9303.4.1.3.1.1 |
wsNeighbourIfIndexNeighbour interface index.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.1.1.1 |
wsNeighbourNIndexNeighbour index.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.1.1.2 |
wsNeighbourHostnameNeighbour hostname.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9303.4.1.3.1.1.3 |
wsNeighbourLocalIfLocal interface that neighbour is on.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9303.4.1.3.1.1.4 |
wsNeighbourRemoteIfRemote interface of neighbour.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9303.4.1.3.1.1.5 |
wsNeighbourModelNeighbour model.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9303.4.1.3.1.1.6 |
wsNeighbourLastActTime in seconds since last neighbour advertisment.ro Integer32 .1.3.6.1.4.1.9303.4.1.3.1.1.7 |
wsNeighbourOSVersionNeighbour OS version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9303.4.1.3.1.1.8 |
wsNeighbourSNPASNPA of neighbour interface.ro OCTET STRING .1.3.6.1.4.1.9303.4.1.3.1.1.9 |
wsNeighbourUptimeUptime in seconds for neighbour.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.1.1.10 |
wsNeighbourStateState of neighbour.ro Enumeration .1.3.6.1.4.1.9303.4.1.3.1.1.11 |
wsNeighbourDBCountDatabase entries for neighbour.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.1.1.12 |
wsNeighbourCreatedThe value of sysUpTime at the time the neighbour first appeared on the interface.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.9303.4.1.3.1.1.13 |
wsNeighbourPacketsInNumber of PFDP packets received from neighbour.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.1.1.14 |
wsNeighbourPacketErrorsrInNumber of erroneous PFDP packets received from neighbour.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.1.1.15 |
wsNeighbourPortsTableTable of ports of discovered PFDB Neighbours. SEQUENCE OF WsNeighbourPortsEntry .1.3.6.1.4.1.9303.4.1.3.2 |
wsNeighbourPortsEntryAn entry for a port of a neighbour. WsNeighbourPortsEntry .1.3.6.1.4.1.9303.4.1.3.2.1 |
wsNeighbourPortIfIndexNeighbour interface index.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.1 |
wsNeighbourPortNIndexNeighbour index.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.2 |
wsNeighbourPortPIndexNeighbour port index.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.3 |
wsNeighbourPortNameName of neighbour port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9303.4.1.3.2.1.4 |
wsNeighbourPortStateState of neighbour port.ro Bits .1.3.6.1.4.1.9303.4.1.3.2.1.5 |
wsNeighbourPortTxOctetsThe total number of good bytes of data transmitted by a port (excluding preamble but including FCS).ro Counter64 .1.3.6.1.4.1.9303.4.1.3.2.1.6 |
wsNeighbourPortTxDropPktsThis counter is incremented every time a transmit packet is dropped due to lack of resources (e.g., transmit FIFO underflow), or an internal MAC sublayer transmit error not counted by.in either the TxLateCollision or the TxExcessiveCollision counters.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.7 |
wsNeighbourPortTxBroadcastPktsThe number of good packets transmitted by a port that are directed to a broadcast address. This counter does not include errored broadcast packets or valid multicast packets.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.8 |
wsNeighbourPortTxMulticastPktsThe number of good packets transmitted by a port that are directed to a multicast address. This counter does not include errored multicast packets or valid broadcast packets.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.9 |
wsNeighbourPortTxUnicastPktsThe number of good packets transmitted by a port that are addressed to a unicast address.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.10 |
wsNeighbourPortTxCollisionsThe number of collisions experienced by a port during packet transmissions.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.11 |
wsNeighbourPortTxDeferredTransmitThe number of packets transmitted by a port for which the first transmission attempt is delayed because the medium is busy.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.12 |
wsNeighbourPortTxFrameInDiscThe number of valid packets received which are discarded by the forwarding process due to lack of space on an output queue.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.13 |
wsNeighbourPortRxOctetsThe number of bytes of data received by a port (excluding preamble but including FCS), including bad packets.ro Counter64 .1.3.6.1.4.1.9303.4.1.3.2.1.14 |
wsNeighbourPortRxUndersizePktsThe number of good packets received by a port that are less than 64 bytes long (excluding framing bits but including the FCS).ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.15 |
wsNeighbourPortPkts64OctetsThe number of packets (including error packets) that are 64 bytes long.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.16 |
wsNeighbourPortPkts65to127OctetsThe number of packets (including error packets) that are between 65 and 127 bytes long.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.17 |
wsNeighbourPortPkts128to255OctetsThe number of packets (including error packets) that are between 128 and 255 bytes long.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.18 |
wsNeighbourPortPkts256to511OctetsThe number of packets (including error packets) that are between 256 and 511 bytes long.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.19 |
wsNeighbourPortPkts512to1023OctetsThe number of packets (including error packets) that are between 512 and 1023 bytes long.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.20 |
wsNeighbourPortPkts1024to1522OctetsThe number of packets (including error packets) that are between 1024 and 1522 bytes long.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.21 |
wsNeighbourPortRxOversizePktsThe number of good packets received by a port that are greater than 1522 bytes inclusive (excluding framing bits but including the FCS). Note that this counter alone will be incremented for packets in the range 1523-1536 bytes inclusive, whereas both this counter and the RxExcessSizeDisc counter will be incremented for packets of 1537 bytes and higher.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.22 |
wsNeighbourPortRxJabbersThe number of packets received by a port that are longer than 1522 bytes and have either an FCS error or an alignment error.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.23 |
wsNeighbourPortRxAlignmentErrorsThe number of packets received by a port that have a length (excluding framing bits but including FCS) between 64 and 1522 bytes, inclusive, and have a bad FCS with a nonintegral number of bytes.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.24 |
wsNeighbourPortRxFCSErrorsThe number of packets received by a port that have a length (excluding framing bits but including FCS) between 64 and 1522 bytes inclusive, and have a bad FCS with an integral number of bytes.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.25 |
wsNeighbourPortRxGoodOctetsThe total number of bytes in all good packets received by a port (excluding framing bits but including FCS).ro Counter64 .1.3.6.1.4.1.9303.4.1.3.2.1.26 |
wsNeighbourPortRxDropPktsThe number of good packets received by a port that were dropped due to lack of resources (e.g., lack of input buffers) or were dropped due to lack of resources before a determination of the validity of the packet was able to be made (e.g., receive FIFO overflow). The counter is only incremented if the receive error was not counted by.either the RxExcessSizeDisc, the RxAlignmentErrors or the RxFCSErrors counters.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.27 |
wsNeighbourPortRxUnicastPktsThe number of good packets received by a port that are addressed to a unicast address.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.28 |
wsNeighbourPortRxMulticastPktsThe number of good packets received by a port that are directed to a multicast address. This counter does not include errored multicast packets or valid broadcast packets.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.29 |
wsNeighbourPortRxBroadcastPktsThe number of good packets received by a port that are directed to the broadcast address. This counter does not include errored broadcast packets or valid multicast packets.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.30 |
wsNeighbourPortRxFragmentsThe number of packets received by a port that are less than 64 bytes (excluding framing bits) and have either an FCS error or an alignment error.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.31 |
wsNeighbourPortRxExcessSizeDiscThe number of good packets received by a port that are greater than 1536 bytes (excluding framing bits but including the FCS) and were discarded due to excessive length. Note that the RxOversizePkts counter alone is incremented for packets in the range 1523-1536 bytes inclusive, whereas both this counter and the RxOversizePkts counter are incremented for packets of 1537 bytes and higher.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.32 |
wsNeighbourPortRxSymbolErrorThe total number of times a valid length packet was received at a port and at least one invalid data symbol was detected. Counter only increment once per carrier event and does not increment on detection of collision during the carrier event.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.2.1.33 |
wsNeighbourPortSNPATableTable of known SNPA on ports of discovered PFDB Neighbours. SEQUENCE OF WsNeighbourPortSNPAEntry .1.3.6.1.4.1.9303.4.1.3.3 |
wsNeighbourPortSNPAEntryAn entry for a known SNPA on a port of a neighbour. WsNeighbourPortSNPAEntry .1.3.6.1.4.1.9303.4.1.3.3.1 |
wsNeighbourPortSNPAIfIndexNeighbour interface index.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.3.1.1 |
wsNeighbourPortSNPANIndexNeighbour index.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.3.1.2 |
wsNeighbourPortSNPAPIndexNeighbour port index.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.3.1.3 |
wsNeighbourPortSNPASIndexNeighbour port SNPA index.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.3.3.1.4 |
wsNeighbourPortSNPASMCastSet to 1 if SNPA is a multicast address, 0 otherwise.ro Integer32 .1.3.6.1.4.1.9303.4.1.3.3.1.5 |
wsNeighbourPortSNPAKnown SNPA on neighbour port.ro OCTET STRING .1.3.6.1.4.1.9303.4.1.3.3.1.6 |
wsSFPTableTable with information on SFPs. SEQUENCE OF WsSFPEntry .1.3.6.1.4.1.9303.4.1.4 |
wsSFPEntryAn entry for an SFP. WsSFPEntry .1.3.6.1.4.1.9303.4.1.4.1 |
wsSFPIndexSFP number.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.4.1.1 |
wsSFPStatusSFP status.ro Enumeration .1.3.6.1.4.1.9303.4.1.4.1.2 |
wsSFPConnectorConnector type.ro Enumeration .1.3.6.1.4.1.9303.4.1.4.1.3 |
wsSFPTransceiverTransceiver capablities.ro Bits .1.3.6.1.4.1.9303.4.1.4.1.4 |
wsSFPEncodingEncoding type.ro Enumeration .1.3.6.1.4.1.9303.4.1.4.1.5 |
wsSFPBitrateSFP Bitrate (Mbps).ro Unsigned32 .1.3.6.1.4.1.9303.4.1.4.1.6 |
wsSFPSingleModeLenSupported single mode fiber link length (m). A value of 255000 means > 254000 m.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.4.1.7 |
wsSFPMultiMode50LenSupported 50um multi-mode fiber link length (m). A value of 2550 means > 2540 m.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.4.1.8 |
wsSFPMultiMode625LenSupported 62.5um multi-mode fiber link length (m). A value of 2550 means > 2540 m.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.4.1.9 |
wsSFPCopperLenSupported copper link length (m). A value of 255 means > 254 m.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.4.1.10 |
wsSFPTempStatusTemperature status.ro Enumeration .1.3.6.1.4.1.9303.4.1.4.1.11 |
wsSFPTempMeasured temperature in degrees centigrade.ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.12 |
wsSFPVoltStatusVoltage status.ro Enumeration .1.3.6.1.4.1.9303.4.1.4.1.13 |
wsSFPVoltMeasured voltage (mV).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.14 |
wsSFPTXCurrentStatusTX Current status.ro Enumeration .1.3.6.1.4.1.9303.4.1.4.1.15 |
wsSFPTXCurrentMeasured TX current (mA).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.16 |
wsSFPTXPowerStatusTX power status.ro Enumeration .1.3.6.1.4.1.9303.4.1.4.1.17 |
wsSFPTXPowerMeasured TX power (uW).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.18 |
wsSFPRXPowerStatusRX power status.ro Enumeration .1.3.6.1.4.1.9303.4.1.4.1.19 |
wsSFPRXPowerMeasured RX power (uW).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.20 |
wsSFPTransceiverExt10G Ethernet Compliance Codes.ro Bits .1.3.6.1.4.1.9303.4.1.4.1.21 |
wsSFPTXdBmPowerMeasured TX power (dBm x 1000).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.22 |
wsSFPRXdBmPowerMeasured RX power (dBm x 1000).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.23 |
wsSFPTempNormalLowOperating temparature normal range low (C).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.24 |
wsSFPTempNormalHighOperating temparature normal range high (C).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.25 |
wsSFPTempWarningLowOperating temparature warning range low (C).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.26 |
wsSFPTempWarningHighOperating temparature warning range high (C).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.27 |
wsSFPVoltNormalLowSupply voltage normal range low (mV).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.28 |
wsSFPVoltNormalHighSupply voltage normal range high (mV).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.29 |
wsSFPVoltWarningLowSupply voltage warning range low (mV).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.30 |
wsSFPVoltWarningHighSupply voltage warning range high (mV).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.31 |
wsSFPTXCurrentNormalLowTX Current normal range low (mA).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.32 |
wsSFPTXCurrentNormalHighTX Current normal range high (mA).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.33 |
wsSFPTXCurrentWarningLowTX Current warning range low (mA).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.34 |
wsSFPTXCurrentWarningHighTX Current warning range high (mA).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.35 |
wsSFPTXOutputPowNormalLowuWTX output power normal range low (uW).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.36 |
wsSFPTXOutputPowNormalHighuWTX output power normal range high (uW).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.37 |
wsSFPTXOutputPowWarningLowuWTX output power warning range low (uW).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.38 |
wsSFPTXOutputPowWarningHighuWTX output power warning range high (uW).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.39 |
wsSFPTXOutputPowNormalLowdBmTX output power normal range low (dBm x 1000).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.40 |
wsSFPTXOutputPowNormalHighdBmTX output power normal range high (dBm x 1000).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.41 |
wsSFPTXOutputPowWarningLowdBmTX output power warning range low (dBm x 1000).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.42 |
wsSFPTXOutputPowWarningHighdBmTX output power warning range high (dBm x 1000).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.43 |
wsSFPRXInputPowNormalLowuWRX input power normal range low (uW).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.44 |
wsSFPRXInputPowNormalHighuWRX input power normal range high (uW).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.45 |
wsSFPRXInputPowWarningLowuWRX input power warning range low (uW).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.46 |
wsSFPRXInputPowWarningHighuWRX input power warning range high (uW).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.47 |
wsSFPRXInputPowNormalLowdBmRX input power normal range low (dBm x 1000).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.48 |
wsSFPRXInputPowNormalHighdBmRX input power normal range high (dBm x 1000).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.49 |
wsSFPRXInputPowWarningLowdBmRX input power warning range low (dBm x 1000).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.50 |
wsSFPRXInputPowWarningHighdBmRX input power warning range high (dBm x 1000).ro Integer32 .1.3.6.1.4.1.9303.4.1.4.1.51 |
wsSFPPartNumberSFP part number.ro DisplayString .1.3.6.1.4.1.9303.4.1.4.1.52 |
wsSFPSerialNumberSFP serial number.ro DisplayString .1.3.6.1.4.1.9303.4.1.4.1.53 |
wsAccountingAccounting objects OBJECT IDENTIFIER .1.3.6.1.4.1.9303.4.1.5 |
wsPolicyTableTable of policy accounting information. SEQUENCE OF WsPolicyEntry .1.3.6.1.4.1.9303.4.1.5.1 |
wsPolicyEntryAn entry for a policy. WsPolicyEntry .1.3.6.1.4.1.9303.4.1.5.1.1 |
wsPolicyIfIndexInterface index of policy accounting entry.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.5.1.1.1 |
wsPolicyIfNameInterface name of policy accountin entryro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9303.4.1.5.1.1.2 |
wsPolicyNameName of policy.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9303.4.1.5.1.1.3 |
wsPolicyCookieName of policy cookie.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9303.4.1.5.1.1.4 |
wsPolicyInPktsInput packets counter.ro Counter64 .1.3.6.1.4.1.9303.4.1.5.1.1.5 |
wsPolicyInBytesInput bytes counter.ro Counter64 .1.3.6.1.4.1.9303.4.1.5.1.1.6 |
wsPolicyInDropsNumber input packets dropped.ro Counter64 .1.3.6.1.4.1.9303.4.1.5.1.1.7 |
wsPolicyOutPktsOutput packets counter.ro Counter64 .1.3.6.1.4.1.9303.4.1.5.1.1.8 |
wsPolicyOutBytesOutput bytes counter.ro Counter64 .1.3.6.1.4.1.9303.4.1.5.1.1.9 |
wsPolicyOutDropsNumber input packets dropped.ro Counter64 .1.3.6.1.4.1.9303.4.1.5.1.1.10 |
wsPolicyUsedCntNumber policy maps set to use this policy.ro Gauge32 .1.3.6.1.4.1.9303.4.1.5.1.1.11 |
wsXFPTableTable with information on XFPs. SEQUENCE OF WsXFPEntry .1.3.6.1.4.1.9303.4.1.6 |
wsXFPEntryAn entry for an XFP. WsXFPEntry .1.3.6.1.4.1.9303.4.1.6.1 |
wsXFPIndexXFP number.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.6.1.1 |
wsXFPStatusXFP status.ro Enumeration .1.3.6.1.4.1.9303.4.1.6.1.2 |
wsXFPConnectorConnector type.ro Enumeration .1.3.6.1.4.1.9303.4.1.6.1.3 |
wsXFPTransceiverTransceiver capablities.ro Bits .1.3.6.1.4.1.9303.4.1.6.1.4 |
wsXFPEncodingEncoding type.ro Bits .1.3.6.1.4.1.9303.4.1.6.1.5 |
wsXFPBitrateMinXFP Min Bitrate (Mbps).ro Unsigned32 .1.3.6.1.4.1.9303.4.1.6.1.6 |
wsXFPBitrateMaxXFP Max Bitrate (Mbps).ro Unsigned32 .1.3.6.1.4.1.9303.4.1.6.1.7 |
wsXFPSingleModeLenSupported single mode fiber link length (m). A value of 255000 means > 254000 m.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.6.1.8 |
wsXFPMultiMode50LenSupported 50um multi-mode fiber link length (m). A value of 510 means > 508 m.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.6.1.9 |
wsXFPMultiMode625LenSupported 62.5um multi-mode fiber link length (m). A value of 255 means > 254 m.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.6.1.10 |
wsXFPCopperLenSupported copper link length (m). A value of 255 means > 254 m.ro Unsigned32 .1.3.6.1.4.1.9303.4.1.6.1.11 |
wsXFPTempStatusTemperature status.ro Enumeration .1.3.6.1.4.1.9303.4.1.6.1.12 |
wsXFPTempMeasured temperature in degrees centigrade.ro Integer32 .1.3.6.1.4.1.9303.4.1.6.1.13 |
wsXFPTXCurrentStatusTX Current status.ro Enumeration .1.3.6.1.4.1.9303.4.1.6.1.14 |
wsXFPTXCurrentMeasured TX current (mA).ro Integer32 .1.3.6.1.4.1.9303.4.1.6.1.15 |
wsXFPTXPowerStatusTX power status.ro Enumeration .1.3.6.1.4.1.9303.4.1.6.1.16 |
wsXFPTXPowerMeasured TX power (uW).ro Integer32 .1.3.6.1.4.1.9303.4.1.6.1.17 |
wsXFPRXPowerStatusRX power status.ro Enumeration .1.3.6.1.4.1.9303.4.1.6.1.18 |
wsXFPRXPowerMeasured RX power (uW).ro Integer32 .1.3.6.1.4.1.9303.4.1.6.1.19 |