Vega-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Vega-MIB.
129
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
129 total| Object Name |
|---|
vega OBJECT IDENTIFIER .1.3.6.1.4.1.4686 |
IMPORTS Unknown .1.3.6.1.4.1.4686 |
vsplatform OBJECT IDENTIFIER .1.3.6.1.4.1.4686.11 |
fileServerOrFileNotFoundSome File server for autoexec not found.
TFTP/FTP/HTTP/HTTPS - it might not be
running or cannot be reached TRAP-TYPE .1.3.6.1.4.1.4686.11.0.1 |
scriptFileTooBigAutoexec script file is too big; there is a 512 byte
limit on the script file TRAP-TYPE .1.3.6.1.4.1.4686.11.0.2 |
fileServerUnknownErrorFileServer (TFTP/FTP/HTTP/HTTPS) unknown error reported TRAP-TYPE .1.3.6.1.4.1.4686.11.0.3 |
fileDoesNotExistFile does not exist on FileServer or invalid filename TRAP-TYPE .1.3.6.1.4.1.4686.11.0.4 |
recurFileServerGetErrorRecursive FileServer (TFTP/FTP/HTTP/HTTPS) get error -
only allowed one TFTP/FTP/HTTP/HTTPS get at a time TRAP-TYPE .1.3.6.1.4.1.4686.11.0.5 |
fileServerGetMemoryErrorGet memory error - the system hasn't
enough memory to perform a TFTP/FTP/HTTP/HTTPS get TRAP-TYPE .1.3.6.1.4.1.4686.11.0.6 |
lanInterfaceNotActiveLan Interface Entity not active TRAP-TYPE .1.3.6.1.4.1.4686.11.0.7 |
ftpNotConfiguredFTP not configured - FTP IP address is set to 0.0.0.0 0 TRAP-TYPE .1.3.6.1.4.1.4686.11.0.8 |
invalidUserParamsInvalid user parameters e.g. incorrect filename TRAP-TYPE .1.3.6.1.4.1.4686.11.0.9 |
serverUnavailableFTP/TFTP/HTTP/HTTPS Server Unavailable TRAP-TYPE .1.3.6.1.4.1.4686.11.0.10 |
systemNotReadySystem not ready - unable to action AUTOEXEC TRAP-TYPE .1.3.6.1.4.1.4686.11.0.11 |
tftpNotConfiguredTFTP not configured - TFTP IP address is set to 0.0.0.0 TRAP-TYPE .1.3.6.1.4.1.4686.11.0.12 |
httpNotConfiguredHTTP not configured - HTTP IP address is set to 0.0.0.0 TRAP-TYPE .1.3.6.1.4.1.4686.11.0.13 |
httpsNotConfiguredHTTPS not configured - HTTPS IP address is set to 0.0.0.0 TRAP-TYPE .1.3.6.1.4.1.4686.11.0.14 |
configNotLoadedConfiguration not loaded tget used with ifdiff option but remote configuration file is not different TRAP-TYPE .1.3.6.1.4.1.4686.11.0.21 |
firmwareNotLoadedFirmware not loaded, 1.ifnew / remote firmware not newer 2.ifdiff / remote firmware not different TRAP-TYPE .1.3.6.1.4.1.4686.11.0.22 |
configLoadedConfiguration loaded- loaded remote configuration TRAP-TYPE .1.3.6.1.4.1.4686.11.0.23 |
firmwareLoadedFirmware loaded - loaded remote firmware TRAP-TYPE .1.3.6.1.4.1.4686.11.0.24 |
bypassRelayActivatedOngoing Emergency Call on port 1 or 2 POTS bypass relay activated TRAP-TYPE .1.3.6.1.4.1.4686.11.0.25 |
pktLossThresholdExceedGateway packet loss threshold has been exceeded TRAP-TYPE .1.3.6.1.4.1.4686.11.0.30 |
playoutThresholdExceedGateway play-out delay threshold has been exceeded TRAP-TYPE .1.3.6.1.4.1.4686.11.0.31 |
jitterThresholdExceedAverage jitter threshold has been exceeded TRAP-TYPE .1.3.6.1.4.1.4686.11.0.32 |
sysFanFailedAll System Fans Failed TRAP-TYPE .1.3.6.1.4.1.4686.11.0.40 |
sysFanOKSystem Fan OK TRAP-TYPE .1.3.6.1.4.1.4686.11.0.41 |
sysOverTempIndicationOver Temperature Indication TRAP-TYPE .1.3.6.1.4.1.4686.11.0.42 |
sysOverTempOKOver Temperature OK TRAP-TYPE .1.3.6.1.4.1.4686.11.0.43 |
sysOverPowerExcessive Power Consumption TRAP-TYPE .1.3.6.1.4.1.4686.11.0.44 |
sysOverPowerOKPower Usage OK TRAP-TYPE .1.3.6.1.4.1.4686.11.0.45 |
fxsPortShutDownFXS Port Shut down due to thermal heating TRAP-TYPE .1.3.6.1.4.1.4686.11.0.46 |
sipRegistrationSuccessSip Registration Success Indication TRAP-TYPE .1.3.6.1.4.1.4686.11.0.50 |
sipRegistrationFailureSip Registration Failure Indication TRAP-TYPE .1.3.6.1.4.1.4686.11.0.51 |
sipUnRegisteredSip Unregistered Indication TRAP-TYPE .1.3.6.1.4.1.4686.11.0.52 |
iSDNLinkUpISDN Link up TRAP-TYPE .1.3.6.1.4.1.4686.11.0.60 |
iSDNLinkDownISDN Link down TRAP-TYPE .1.3.6.1.4.1.4686.11.0.61 |
lANLinkUpLAN Link up TRAP-TYPE .1.3.6.1.4.1.4686.11.0.62 |
lANLinkDownLAN Link down TRAP-TYPE .1.3.6.1.4.1.4686.11.0.63 |
cOLDSTARTCOLDSTART TRAP-TYPE .1.3.6.1.4.1.4686.11.0.64 |
wARMSTARTWARMSTART TRAP-TYPE .1.3.6.1.4.1.4686.11.0.65 |
dspFatalErrorDSP Fatal ERROR Vega Reboot TRAP-TYPE .1.3.6.1.4.1.4686.11.0.66 |
callStats OBJECT IDENTIFIER .1.3.6.1.4.1.4686.11.1 |
noCircuitsTotal number of circuits on all interfacesro INTEGER .1.3.6.1.4.1.4686.11.1.1 |
upTimeTotal up time of all interfacesro INTEGER .1.3.6.1.4.1.4686.11.1.2 |
downTimeTotal down time of all interfacesro INTEGER .1.3.6.1.4.1.4686.11.1.3 |
startTimeStart time of the last interfacero INTEGER .1.3.6.1.4.1.4686.11.1.4 |
endTimeEnd time of the last interfacero INTEGER .1.3.6.1.4.1.4686.11.1.5 |
inboundCallsTotal number of inbound callsro Counter .1.3.6.1.4.1.4686.11.1.6 |
inboundAnsweredTotal number of inbound calls answeredro Counter .1.3.6.1.4.1.4686.11.1.7 |
inboundBusyTotal number of inbound calls that were busyro Counter .1.3.6.1.4.1.4686.11.1.8 |
inboundNoAnswerTotal number of inbound calls not answeredro Counter .1.3.6.1.4.1.4686.11.1.9 |
inboundTermRejectTotal number of inbound calls rejected by terminalro Counter .1.3.6.1.4.1.4686.11.1.10 |
outboundCallsTotal number of outbound callsro Counter .1.3.6.1.4.1.4686.11.1.11 |
outboundAnsweredTotal number of outbound calls answeredro Counter .1.3.6.1.4.1.4686.11.1.12 |
outboundBusyTotal number of outbound calls that were busyro Counter .1.3.6.1.4.1.4686.11.1.13 |
outboundNoAnswerTotal number of outbound calls not answeredro Counter .1.3.6.1.4.1.4686.11.1.14 |
outboundTermRejectTotal number of outbound calls rejected by terminalro Counter .1.3.6.1.4.1.4686.11.1.15 |
inboundCurrUseCurrent number of inbound callsro Counter .1.3.6.1.4.1.4686.11.1.16 |
outboundCurrUseCurrent number of outbound callsro Counter .1.3.6.1.4.1.4686.11.1.17 |
inboundMaxUseMaximum Number of inbound callsro Counter .1.3.6.1.4.1.4686.11.1.18 |
outboundMaxUseMaximum Number of outbound callsro Counter .1.3.6.1.4.1.4686.11.1.19 |
allMaxUseMaximum Number of inbound & outbound callsro Counter .1.3.6.1.4.1.4686.11.1.20 |
inboundAvAnswerAverage answer time for inbound callsro Integer32 .1.3.6.1.4.1.4686.11.1.21 |
outboundAvAnswerAverage answer time for outbound callsro Integer32 .1.3.6.1.4.1.4686.11.1.22 |
inboundAvCallAverage call time for inbound callsro Integer32 .1.3.6.1.4.1.4686.11.1.23 |
inboundMaxCallMaximum call time for an inbound callro Integer32 .1.3.6.1.4.1.4686.11.1.24 |
outboundAvCallAverage call time for outbound callsro Integer32 .1.3.6.1.4.1.4686.11.1.25 |
outboundMaxCallMaximum call time for an outbound callro Integer32 .1.3.6.1.4.1.4686.11.1.26 |
inboundAvDialSuccAverage dial to answer time for inbound callsro Integer32 .1.3.6.1.4.1.4686.11.1.27 |
outboundAvDialSuccAverage dial to answer time for outbound callsro Integer32 .1.3.6.1.4.1.4686.11.1.28 |
inboundAvDialFailAverage dial to fail time for inbound callsro Integer32 .1.3.6.1.4.1.4686.11.1.29 |
outboundAvDialFailAverage dial to fail time for outbound callsro Integer32 .1.3.6.1.4.1.4686.11.1.30 |
averageJitterAverage jitter across interfacesro Integer32 .1.3.6.1.4.1.4686.11.1.31 |
maximumJitterMaximum jitter across interfacesro Integer32 .1.3.6.1.4.1.4686.11.1.32 |
averageLossAverage loss across interfacesro Integer32 .1.3.6.1.4.1.4686.11.1.33 |
maximumLossMaximum loss across interfacesro Integer32 .1.3.6.1.4.1.4686.11.1.34 |
ifFanStateFan Statero OCTET STRING .1.3.6.1.4.1.4686.11.1.35 |
ifPowerStatusPower Statusro OCTET STRING .1.3.6.1.4.1.4686.11.1.36 |
interfaces OBJECT IDENTIFIER .1.3.6.1.4.1.4686.11.2 |
ifNumberThe number of network interfaces (regardless of their
current state) present on this system.ro Integer32 .1.3.6.1.4.1.4686.11.2.1 |
ifTableA list of interface entries. The number of entries is
given by the value of ifNumber. SEQUENCE OF IfEntry .1.3.6.1.4.1.4686.11.2.2 |
ifEntryAn entry containing management information applicable to a
particular interface. IfEntry .1.3.6.1.4.1.4686.11.2.2.1 |
ifIndexA unique value, greater than zero, for each interface. It
is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remain constant at least from one re-initialization of
the entity's network management system to the next re-
initialization.ro InterfaceIndex .1.3.6.1.4.1.4686.11.2.2.1.1 |
ifTypeThe type of the interfacero Integer32 .1.3.6.1.4.1.4686.11.2.2.1.2 |
ifNoCircuitsThe number of circuits on the interfacero Integer32 .1.3.6.1.4.1.4686.11.2.2.1.3 |
ifUpTimeThe up time of the Interface in secondsro Integer32 .1.3.6.1.4.1.4686.11.2.2.1.4 |
ifDownTimeThe down time of the Interface in secondsro Integer32 .1.3.6.1.4.1.4686.11.2.2.1.5 |
ifStartTimeThe Start time of the Interface in secondsro Integer32 .1.3.6.1.4.1.4686.11.2.2.1.6 |
ifEndTimeThe End time of the Interface in secondsro Integer32 .1.3.6.1.4.1.4686.11.2.2.1.7 |
ifInboundCallsThe number of inbound calls for the Interfacero Counter .1.3.6.1.4.1.4686.11.2.2.1.8 |
ifInboundAnsweredThe number of inbound calls answered for the Interfacero Counter .1.3.6.1.4.1.4686.11.2.2.1.9 |
ifInboundBusyThe number of inbound calls busy for the Interfacero Counter .1.3.6.1.4.1.4686.11.2.2.1.10 |
ifInboundNoAnswerThe number of inbound calls not answered for the Interfacero Counter .1.3.6.1.4.1.4686.11.2.2.1.11 |
ifInboundTermRejectThe number of inbound calls rejected on the terminal for the Interfacero Counter .1.3.6.1.4.1.4686.11.2.2.1.12 |
ifOutboundCallsThe number of outbound calls for the Interfacero Counter .1.3.6.1.4.1.4686.11.2.2.1.13 |
ifOutboundAnsweredThe number of outbound calls answered for the Interfacero Counter .1.3.6.1.4.1.4686.11.2.2.1.14 |
ifOutboundBusyThe number of outbound calls busy for the Interfacero Counter .1.3.6.1.4.1.4686.11.2.2.1.15 |
ifOutboundNoAnswerThe number of outbound calls not answered for the Interfacero Counter .1.3.6.1.4.1.4686.11.2.2.1.16 |
ifOutboundTermRejectThe number of outbound calls rejected on the terminal for the Interfacero Counter .1.3.6.1.4.1.4686.11.2.2.1.17 |
ifInboundCurrUseThe current number of inbound calls for the Interfacero Counter .1.3.6.1.4.1.4686.11.2.2.1.18 |
ifOutboundCurrUseThe current number of outbound calls for the Interfacero Counter .1.3.6.1.4.1.4686.11.2.2.1.19 |
ifInboundMaxUseThe maximum number of inbound calls for the Interfacero Counter .1.3.6.1.4.1.4686.11.2.2.1.20 |
ifOutboundMaxUseThe maximum number of outbound calls for the Interfacero Counter .1.3.6.1.4.1.4686.11.2.2.1.21 |
ifAllMaxUseThe maximum number of inbound & outbound calls for the Interfacero Counter .1.3.6.1.4.1.4686.11.2.2.1.22 |
ifInboundAvAnswerThe average answer time of inbound calls for the Interfacero Integer32 .1.3.6.1.4.1.4686.11.2.2.1.23 |
ifOutboundAvAnswerThe average answer time of outbound calls for the Interfacero Integer32 .1.3.6.1.4.1.4686.11.2.2.1.24 |
ifInboundAvCallThe average call time of inbound calls for the Interfacero Integer32 .1.3.6.1.4.1.4686.11.2.2.1.25 |
ifInboundMaxCallThe maximum call time of an inbound call for the Interfacero Integer32 .1.3.6.1.4.1.4686.11.2.2.1.26 |
ifOutboundAvCallThe average call time of outbound calls for the Interfacero Integer32 .1.3.6.1.4.1.4686.11.2.2.1.27 |
ifOutboundMaxCallThe maximum call time of an outbound call for the Interfacero Integer32 .1.3.6.1.4.1.4686.11.2.2.1.28 |
ifInboundAvDialSuccThe average dial to answer time of inbound calls for the Interfacero Integer32 .1.3.6.1.4.1.4686.11.2.2.1.29 |
ifOutboundAvDialSuccThe average dial to answer time of outbound call for the Interfacero Integer32 .1.3.6.1.4.1.4686.11.2.2.1.30 |
ifInboundAvDialFailThe average dial to fail time of inbound calls for the Interfacero Integer32 .1.3.6.1.4.1.4686.11.2.2.1.31 |
ifOutboundAvDialFailThe average dial to fail time of outbound calls for the Interfacero Integer32 .1.3.6.1.4.1.4686.11.2.2.1.32 |
ifAverageJitterThe average jitter of incoming packets for the Interfacero Integer32 .1.3.6.1.4.1.4686.11.2.2.1.33 |
ifMaximumJitterThe maximum jitter of incoming packets for the Interfacero Integer32 .1.3.6.1.4.1.4686.11.2.2.1.34 |
ifAverageLossThe average loss of incoming packets for the Interfacero Integer32 .1.3.6.1.4.1.4686.11.2.2.1.35 |
ifMaximumLossThe maximum loss of incoming packets for the Interfacero Integer32 .1.3.6.1.4.1.4686.11.2.2.1.36 |
sipUsrTableA list of SIP Users. The number of entries is
given by the value of ifNumber. SEQUENCE OF SipUsrEntry .1.3.6.1.4.1.4686.11.2.3 |
sipUsrEntryAn entry containing management information applicable to a
particular sip user. SipUsrEntry .1.3.6.1.4.1.4686.11.2.3.1 |
sipIndexA unique value, greater than zero, for each sip User. It
is recommended that values are assigned contiguously
starting from 1. The value for each sip user sub-layer
must remain constant at least from one re-initialization of
the entity's network management system to the next re-
initialization.ro SipUsrIndex .1.3.6.1.4.1.4686.11.2.3.1.1 |
sipRegisterUserThe auth name of sip Userro Integer32 .1.3.6.1.4.1.4686.11.2.3.1.2 |
sipRegisterStatusThe registration status of sip userro OCTET STRING .1.3.6.1.4.1.4686.11.2.3.1.3 |
sipRegisterAddressThe register address of the sip userro OCTET STRING .1.3.6.1.4.1.4686.11.2.3.1.4 |
sipRegisterRegistrarThe registrar information where sip user is registeredro OCTET STRING .1.3.6.1.4.1.4686.11.2.3.1.5 |
sipRegisterContactThe contact used by sip user for registrationro OCTET STRING .1.3.6.1.4.1.4686.11.2.3.1.6 |
sipRegisterSipProfileThe sip profile on which sip user is registerro Integer32 .1.3.6.1.4.1.4686.11.2.3.1.7 |
sipRegisterTTLThe registration time out of the sip userro Integer32 .1.3.6.1.4.1.4686.11.2.3.1.8 |