VIPRINET-MIB
This MIB complements the ViprinetMIB.
Main OID:
viprinet.1.3.6.1.4.1.35424
88
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
88 total| Object Name |
|---|
viprinetThis MIB complements the ViprinetMIB. MODULE-IDENTITY .1.3.6.1.4.1.35424 |
vpnRouter OBJECT IDENTIFIER .1.3.6.1.4.1.35424.1 |
vpnRouterInfo OBJECT IDENTIFIER .1.3.6.1.4.1.35424.1.1 |
vpnRouterNameA short descriptive name of the router.ro OCTET STRING .1.3.6.1.4.1.35424.1.1.1 |
vpnRouterSerialSerial number of this router.ro OCTET STRING .1.3.6.1.4.1.35424.1.1.2 |
vpnRouterModelRouter Modelro OCTET STRING .1.3.6.1.4.1.35424.1.1.3 |
vpnRouterFirmwareFirmware Version currently running on this router.ro OCTET STRING .1.3.6.1.4.1.35424.1.1.4 |
vpnRouterModeCurrent mode that the router is running in. Possible values are: 0 - Node 1 - Hub 2 - Hub running as HotSpare 3 - Hotspare-Hub replacing another routerro Integer32 .1.3.6.1.4.1.35424.1.1.5 |
vpnRouteruptimeElapsed time since the router has booted.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.35424.1.1.6 |
vpnRouterFirmwareStatusCurrent Status of the Update System. Possible values are: 0 - Idle / No new firmware available 1 - Updates Available 2 - Checking for Updates 3 - Downloading Update 4 - Installing Updatero Integer32 .1.3.6.1.4.1.35424.1.1.7 |
vpnRouterHealth OBJECT IDENTIFIER .1.3.6.1.4.1.35424.1.2 |
vpnRouterCPULoadLoad average on this routerro OCTET STRING .1.3.6.1.4.1.35424.1.2.1 |
vpnRouterMemoryUsageCurrent total memory usage (in KByte).ro Integer32 .1.3.6.1.4.1.35424.1.2.2 |
vpnRouterSystemTemperatureCurrent system temperature (in degree Celsius).ro Integer32 .1.3.6.1.4.1.35424.1.2.3 |
vpnRouterCPUTemperatureCurrent CPU temperature (in degree Celsius)ro Integer32 .1.3.6.1.4.1.35424.1.2.4 |
vpnRouterPowerSupplyFailureInformation about the PSU Possible Values are: 0 = no failure 1 = a single PSU is out of orderro Integer32 .1.3.6.1.4.1.35424.1.2.5 |
vpnRouterFans OBJECT IDENTIFIER .1.3.6.1.4.1.35424.1.3 |
vpnRouterFanCountNumber of Fans.ro Integer32 .1.3.6.1.4.1.35424.1.3.1 |
vpnRouterFanTableThe table holding information to each fan. SEQUENCE OF VpnRouterFanEntry .1.3.6.1.4.1.35424.1.3.2 |
vpnRouterFanEntryThe entry associated with each fan. VpnRouterFanEntry .1.3.6.1.4.1.35424.1.3.2.1 |
vpnRouterFanIndexID-Number of the fan Integer32 .1.3.6.1.4.1.35424.1.3.2.1.1 |
vpnRouterFanAdminStatusDesired state of this Fan Possible Values: 0 = off 1 = onro Integer32 .1.3.6.1.4.1.35424.1.3.2.1.2 |
vpnRouterFanOperativeStatusOperative status of this fan 0 = Disabled 1 = OK 2 = Faultyro Integer32 .1.3.6.1.4.1.35424.1.3.2.1.3 |
vpnRouterFanRPMCurrent RPM of this fan. Note that not all models supply this info.ro Integer32 .1.3.6.1.4.1.35424.1.3.2.1.4 |
vpnRouterInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.35424.1.4 |
vpnRouterInterfaceCountNumber of Interfaces.ro Integer32 .1.3.6.1.4.1.35424.1.4.1 |
vpnRouterInterfaceTableThe table holding information to each interface. SEQUENCE OF VpnRouterInterfaceEntry .1.3.6.1.4.1.35424.1.4.2 |
vpnRouterInterfaceEntryThe entry associated with each interface. VpnRouterInterfaceEntry .1.3.6.1.4.1.35424.1.4.2.1 |
vpnRouterInterfaceIndexID-Number of the interface. Integer32 .1.3.6.1.4.1.35424.1.4.2.1.1 |
vpnRouterInterfaceNameA short descriptive name of the interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.35424.1.4.2.1.2 |
vpnRouterInterfaceAdminStatusDesired state of the interface. possible values: 0 = disconnected, 1 = connectedro Integer32 .1.3.6.1.4.1.35424.1.4.2.1.3 |
vpnRouterInterfaceOperativeStatusCurrent state of the interface. possible values: 0 = disconnected, 1 = connected, 2 = connecting, 3 = disconnectingro Integer32 .1.3.6.1.4.1.35424.1.4.2.1.4 |
vpnRouterInterfaceBandwidthToWanTheoretical maximum upstream (in KBit). Might be illusional.ro Integer32 .1.3.6.1.4.1.35424.1.4.2.1.5 |
vpnRouterInterfaceBandwidthFromWanTheoretical maximum downstream (in KBit).ro Integer32 .1.3.6.1.4.1.35424.1.4.2.1.6 |
vpnRouterInterfaceTrafficUpTotal upstream traffic made (in Byte) since router boot.ro Counter32 .1.3.6.1.4.1.35424.1.4.2.1.7 |
vpnRouterInterfaceTrafficDownTotal downstream traffic made (in Byte) since router boot.ro Counter32 .1.3.6.1.4.1.35424.1.4.2.1.8 |
vpnRouterInterfaceSignalStrengthSignal Strength (in percent).ro Integer32 .1.3.6.1.4.1.35424.1.4.2.1.9 |
vpnRouterInterfaceServiceTypeInterface Service Type.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.35424.1.4.2.1.10 |
vpnRouterInterfaceServiceStatusService Status.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.35424.1.4.2.1.11 |
vpnRouterInterfaceRoamingInterface Roaming. possible values: 0 = off, 1 = onro Integer32 .1.3.6.1.4.1.35424.1.4.2.1.12 |
vpnRouterInterfaceNetworkNameInterface Network Name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.35424.1.4.2.1.13 |
vpnRouterInterfaceBandInfoInterface Band Info.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.35424.1.4.2.1.14 |
vpnRouterInterfaceIMSIInterface IMSI.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.35424.1.4.2.1.15 |
vpnRouterInterfaceIMEIInterface IMEI.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.35424.1.4.2.1.16 |
vpnRouterInterfacePINStatusInterface PIN Status.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.35424.1.4.2.1.17 |
vpnRouterInterfaceRFBandInterface RF Band.ro Integer32 .1.3.6.1.4.1.35424.1.4.2.1.18 |
vpnRouterInterfaceRFChannelInterface RF Channel.ro Integer32 .1.3.6.1.4.1.35424.1.4.2.1.19 |
vpnRouterInterfaceSyncrateUpstreamInterface Syncrate Upstream.ro Counter32 .1.3.6.1.4.1.35424.1.4.2.1.20 |
vpnRouterInterfaceSyncrateDownstreamInterface Syncrate Downstream.ro Counter32 .1.3.6.1.4.1.35424.1.4.2.1.21 |
vpnRouterTunnels OBJECT IDENTIFIER .1.3.6.1.4.1.35424.1.5 |
vpnRouterTunnelCountNumber of Tunnels.ro Integer32 .1.3.6.1.4.1.35424.1.5.1 |
vpnRouterTunnelTableThe table holding information to each tunnel. SEQUENCE OF VpnRouterTunnelEntry .1.3.6.1.4.1.35424.1.5.2 |
vpnRouterTunnelEntryThe entry associated with each tunnel. VpnRouterTunnelEntry .1.3.6.1.4.1.35424.1.5.2.1 |
vpnRouterTunnelIndexID-Number of the tunnel. Integer32 .1.3.6.1.4.1.35424.1.5.2.1.1 |
vpnRouterTunnelNameName of VPN tunnelro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.35424.1.5.2.1.2 |
vpnRouterTunnelAdminStatusDesired state of the tunnel. possible values: 0 = disconnected, 1 = connectedro Integer32 .1.3.6.1.4.1.35424.1.5.2.1.3 |
vpnRouterTunnelOperativeStatusCurrent state of the tunnel. possible values: 0 = disconnected, 1 = connectedro Integer32 .1.3.6.1.4.1.35424.1.5.2.1.4 |
vpnRouterTunnelCumulatedBandwidthToWanTheoretical maximum cumulated downstream (in KBit), considering all active channels.ro Integer32 .1.3.6.1.4.1.35424.1.5.2.1.5 |
vpnRouterTunnelCumulatedBandwidthFromWanTheoretical maximum cumulated upstream (in KBit), considering all active channels.ro Integer32 .1.3.6.1.4.1.35424.1.5.2.1.6 |
vpnRouterTunnelCurrentCumulatedBandwidthToWanCurrent cumulated upstream (in KBit).ro Integer32 .1.3.6.1.4.1.35424.1.5.2.1.7 |
vpnRouterTunnelCurrentCumulatedBandwidthFromWanCurrent cumulated downstream (in KBit).ro Integer32 .1.3.6.1.4.1.35424.1.5.2.1.8 |
vpnRouterTunnelTrafficUpTotal upstream traffic made (in Byte) since router boot.ro Counter32 .1.3.6.1.4.1.35424.1.5.2.1.9 |
vpnRouterTunnelTrafficDownTotal downstream traffic made (in Byte) since router boot.ro Counter32 .1.3.6.1.4.1.35424.1.5.2.1.10 |
vpnRouterTunnelRemoteRouterSerialSerial of the remote router.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.35424.1.5.2.1.11 |
vpnRouterTunnelChannels OBJECT IDENTIFIER .1.3.6.1.4.1.35424.1.6 |
vpnRouterTunnelChannelCountNumber of TunnelChannel.ro Integer32 .1.3.6.1.4.1.35424.1.6.1 |
vpnRouterTunnelChannelTableThe table holding information to each tunnelchannel. SEQUENCE OF VpnRouterTunnelChannelEntry .1.3.6.1.4.1.35424.1.6.2 |
vpnRouterTunnelChannelEntryThe entry associated with each tunnelchannel. VpnRouterTunnelChannelEntry .1.3.6.1.4.1.35424.1.6.2.1 |
vpnRouterTunnelChannelIndexID-Number of the tunnelchannel. Integer32 .1.3.6.1.4.1.35424.1.6.2.1.1 |
vpnRouterTunnelChannelNameName of tunnelchannel. It will be in the form tunnel.tunnelnamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.35424.1.6.2.1.2 |
vpnRouterTunnelChannelAdminStatusDesired state of the tunnelchannel. possible values: 0 = disconnected, 1 = connectedro Integer32 .1.3.6.1.4.1.35424.1.6.2.1.3 |
vpnRouterTunnelChannelOperativeStatusCurrent state of the tunnelchannel. possible values: 0 = disconnected, 1 = connected, 2 = connecting, 3 = disconnecting, 4 = connectedpingtest, 5 = connectedpingtestwait, 6 = connectedtooslow, 7 = connectedstalled, 8 = errorro Integer32 .1.3.6.1.4.1.35424.1.6.2.1.4 |
vpnRouterTunnelChannelMaxBandwidthToWanMaximum possible bandwidth to WAN (in KBit/sec).ro Integer32 .1.3.6.1.4.1.35424.1.6.2.1.5 |
vpnRouterTunnelChannelMaxBandwidthFromWanMaximum possible bandwidth from WAN (in KBit/sec).ro Integer32 .1.3.6.1.4.1.35424.1.6.2.1.6 |
vpnRouterTunnelChannelCurrentBandwidthToWanCurrent bandwidth to WAN (in KBit/sec).ro Integer32 .1.3.6.1.4.1.35424.1.6.2.1.7 |
vpnRouterTunnelChannelCurrentBandwidthFromWanCurrent bandwidth from WAN (in KBit/sec).ro Integer32 .1.3.6.1.4.1.35424.1.6.2.1.8 |
vpnRouterTunnelChannelTrafficUpTotal upstream traffic made (in Byte) since router boot.ro Counter32 .1.3.6.1.4.1.35424.1.6.2.1.9 |
vpnRouterTunnelChannelTrafficDownTotal downstream traffic made (in Byte) since router boot.ro Counter32 .1.3.6.1.4.1.35424.1.6.2.1.10 |
vpnRouterTunnelChannelReferencedTunnelThe OID of the tunnel that this channel is referencing to.ro Integer32 .1.3.6.1.4.1.35424.1.6.2.1.11 |
vpnRouterTunnelChannelIsBackupIs this channel configured as fallback? Possible Values: 0 = no, 1 = yesro Integer32 .1.3.6.1.4.1.35424.1.6.2.1.12 |
vpnRouterTunnelChannelModuleSlotModule that the channel is using. Possible Values: 0 = Hub WAN-Interface, 1 = Module in Slot 1, 2 = Module in Slot 2, 3 = Module in Slot 3, 4 = Module in Slot 4, 5 = Module in Slot 5, 6 = Module in Slot 6ro Integer32 .1.3.6.1.4.1.35424.1.6.2.1.13 |
vpnRouterTunnelChannelPacketLossOverall packetloss experienced (in %) on the channel-connection.ro Integer32 .1.3.6.1.4.1.35424.1.6.2.1.14 |
vpnRouterTunnelChannelLinkStabilityEstimated Link Stability (in %) of the channel-connection.ro Integer32 .1.3.6.1.4.1.35424.1.6.2.1.15 |
vpnRouterConformance OBJECT IDENTIFIER .1.3.6.1.4.1.35424.1.7 |
vpnRouterGroups OBJECT IDENTIFIER .1.3.6.1.4.1.35424.1.7.1 |
vpnRouterObjectsThe Objects of the vpnRouter. Unknown .1.3.6.1.4.1.35424.1.7.1.1 |
vpnRouterCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.35424.1.7.2 |
vpnRouterReadOnlyComplianceWhen this MIB is implemented without support for read- create (i.e., in read-only mode), the implementation can claim read-only compliance. Unknown .1.3.6.1.4.1.35424.1.7.2.1 |