Home/Catalog/UNITRENDS-SNMP

UNITRENDS-SNMP

AI MIB Summary

The UNITRENDS-SNMP MIB module enables SNMP GET and TRAP monitoring of Unitrends Rapid Recovery backup appliance components and system events. It facilitates the retrieval of operational status data and the reception of notification alerts for backup infrastructure health and fault detection.

This SNMP MIB module supports the Unitrends Rapid Recovery backup appliances for monitoring various components, providing SNMP access to GET and TRAP information, and support events through the NOTIFICATION-TYPE construct. Version: 1.4 07/28/2016 Unitrends copyright information 2013-2016
Main OID:
unitrendsSnmpModule.1.3.6.1.4.1.21865.1.3.1
175
Objects
Active
Status
2
Dependencies

Imported Objects

SNMPv2-SMI
SNMPv2-TC

Objects

175 total
Object Name
unitrends
OBJECT IDENTIFIER
.1.3.6.1.4.1.21865
rr
OBJECT IDENTIFIER
.1.3.6.1.4.1.21865.1
trapMembers
OBJECT IDENTIFIER
.1.3.6.1.4.1.21865.1.1
trapTypeThe type/category of the event.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.1.1
trapAffectedObjThe affected object of the event.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.1.2
trapDescriptionDescriptive information about the event.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.1.3
trapSeveritySeverity of the eventro
UnitrendsSeverity
.1.3.6.1.4.1.21865.1.1.4
trapStatusThe status of the event.ro
INTEGER
.1.3.6.1.4.1.21865.1.1.5
trapLicenseIdThe License Identity of the system for this event.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.1.6
trapDpuIdThe DPU Identity of the system for this event.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.1.7
trapReleaseVersionThe Release Version of the system for this event.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.1.8
trapGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.21865.1.2
trap100
OBJECT IDENTIFIER
.1.3.6.1.4.1.21865.1.2.100
trapPrefix
OBJECT IDENTIFIER
.1.3.6.1.4.1.21865.1.2.100.0
trapGroupClientsThe client state has changed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.21865.1.2.100.0.1
trapGroup3WareThe 3Ware state has changed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.21865.1.2.100.0.2
trapGroupPCIThe PCI state has changed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.21865.1.2.100.0.3
trapGroupProcessThe Process state has changed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.21865.1.2.100.0.5
trapGroupDiskThe Disk state has changed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.21865.1.2.100.0.6
trapGroupCEPThe CEP state has changed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.21865.1.2.100.0.7
trapGroupDPUThe DPU state has changed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.21865.1.2.100.0.8
trapGroupRAIDThe RAID state has changed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.21865.1.2.100.0.9
trapGroupBackupThe Backup state has changed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.21865.1.2.100.0.10
trapGroupArchiveThe Archive state has changed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.21865.1.2.100.0.11
trapGroupVersionThe Version state has changed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.21865.1.2.100.0.12
trapGroupNetworkThe Network state has changed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.21865.1.2.100.0.14
trapGroupDiskHealthThe Disk Health state has changed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.21865.1.2.100.0.15
trapGroupIPMIThe IPMI state has changed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.21865.1.2.100.0.16
trapGroupInstallThe Install state has changed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.21865.1.2.100.0.17
trapGroupTestA Test trap was issued.
NOTIFICATION-TYPE
.1.3.6.1.4.1.21865.1.2.100.0.99
bpGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.21865.1.3
unitrendsSnmpModuleThis SNMP MIB module supports the Unitrends Rapid Recovery backup appliances for monitoring various components, providing SNMP access to GET and TRAP information, and support events through the NOTIFICATION-TYPE construct. Version: 1.4 07/28/2016 Unitrends copyright information 2013-2016
MODULE-IDENTITY
.1.3.6.1.4.1.21865.1.3.1
bpBackupGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.21865.1.3.10
backupProbeInstancesThis attribute denotes the number of Backup entries available on the systemro
INTEGER
.1.3.6.1.4.1.21865.1.3.10.1
backupProbeTableThis object defines the Backup Probe Table.
SEQUENCE OF BackupProbeTableEntry
.1.3.6.1.4.1.21865.1.3.10.2
backupProbeTableEntryThis defines the Backup Probe Table Entry matching the Backups Report.
BackupProbeTableEntry
.1.3.6.1.4.1.21865.1.3.10.2.1
backupIndexThis is an index (one based) for the backup in the list.ro
OneBasedIndex
.1.3.6.1.4.1.21865.1.3.10.2.1.1
backupIdThis is the unique backup ID number of the backup.ro
INTEGER
.1.3.6.1.4.1.21865.1.3.10.2.1.2
backupClientThe Client Name for the backup.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.3.10.2.1.3
backupStatusStringThe Status String for the backup.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.3.10.2.1.4
backupStatusValueThe Status Value for the backup.ro
INTEGER
.1.3.6.1.4.1.21865.1.3.10.2.1.5
backupTimeThe Date/Time for the backup.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.3.10.2.1.6
backupTypeThe Backup Type for the backup.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.3.10.2.1.7
backupSizeThe Size in MB of the backup.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.3.10.2.1.8
backupNumFilesThe Number of Files in the backup.ro
INTEGER
.1.3.6.1.4.1.21865.1.3.10.2.1.9
backupIsLastSet to 1 if this is the last backup of this type.ro
INTEGER
.1.3.6.1.4.1.21865.1.3.10.2.1.10
bpCapacityGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.21865.1.3.20
capacityProbeInstancesThis attribute denotes the number of Capacity entries available on the systemro
INTEGER
.1.3.6.1.4.1.21865.1.3.20.1
capacityProbeTableThis object defines the Capacity Probe Table.
SEQUENCE OF CapacityProbeTableEntry
.1.3.6.1.4.1.21865.1.3.20.2
capacityProbeTableEntryThis object defines the Capacity Probe Table Entry.
CapacityProbeTableEntry
.1.3.6.1.4.1.21865.1.3.20.2.1
capacityIndexThis attribute defines the index (one based) of the capacity.ro
OneBasedIndex
.1.3.6.1.4.1.21865.1.3.20.2.1.1
capacityDeviceIdThis attribute defines the unique Device ID of the device.ro
INTEGER
.1.3.6.1.4.1.21865.1.3.20.2.1.2
capacityDeviceNameThe Device Name for the device whose capacity is reported.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.3.20.2.1.3
capacityDeviceFilenameThe Device Filename for the device whose capacity is reported.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.3.20.2.1.4
capacitySizeThe Capacity or total logical Size of this device.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.3.20.2.1.5
capacityUsedThe amount of space Used on this device.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.3.20.2.1.6
capacityFreeThe amount of Free space on this device.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.3.20.2.1.7
bpReplicationGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.21865.1.3.30
replicationProbeInstancesThis attribute denotes the number of Replication entries available on the systemro
INTEGER
.1.3.6.1.4.1.21865.1.3.30.1
replicationProbeTableThis object defines the Replication Probe Table.
SEQUENCE OF ReplicationProbeTableEntry
.1.3.6.1.4.1.21865.1.3.30.2
replicationProbeTableEntryThis object defines the Replication Probe Table Entry.
ReplicationProbeTableEntry
.1.3.6.1.4.1.21865.1.3.30.2.1
replicationIndexThis attribute defines the index (one based) of the replication.ro
OneBasedIndex
.1.3.6.1.4.1.21865.1.3.30.2.1.1
replicationBackupNoThis attribute defines the backup number of the replication job.ro
INTEGER
.1.3.6.1.4.1.21865.1.3.30.2.1.2
replicationClientThe Client Name for the replication job.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.3.30.2.1.3
replicationDestinationThe Destination Name for the replication job.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.3.30.2.1.4
replicationTimeThe Date-Time for the replication job.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.3.30.2.1.5
replicationSizeThis attribute defines the Size of the replication job.ro
INTEGER
.1.3.6.1.4.1.21865.1.3.30.2.1.6
replicationStatusStringThe Status String for the replication job.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.3.30.2.1.7
replicationStatusThis attribute defines the status of the replication job.ro
INTEGER
.1.3.6.1.4.1.21865.1.3.30.2.1.8
bpArchiveGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.21865.1.3.40
archiveProbeInstancesThis attribute denotes the number of Archive entries available on the systemro
INTEGER
.1.3.6.1.4.1.21865.1.3.40.1
archiveProbeTableThis object defines the Archive Probe Table.
SEQUENCE OF ArchiveProbeTableEntry
.1.3.6.1.4.1.21865.1.3.40.2
archiveProbeTableEntryThis object defines the Archive Probe Table Entry.
ArchiveProbeTableEntry
.1.3.6.1.4.1.21865.1.3.40.2.1
archiveIndexThis attribute defines the index (one based) of the archive.ro
OneBasedIndex
.1.3.6.1.4.1.21865.1.3.40.2.1.1
archiveDeviceIdThis attribute defines the unique Device ID of the archive.ro
INTEGER
.1.3.6.1.4.1.21865.1.3.40.2.1.2
archiveClientThe Client Name for the archive.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.3.40.2.1.3
archiveSuccessThis attribute is =1 if the archive job was successful.ro
INTEGER
.1.3.6.1.4.1.21865.1.3.40.2.1.4
archiveSizeThis attribute defines the Size in MB of the archive job.ro
INTEGER
.1.3.6.1.4.1.21865.1.3.40.2.1.5
archiveBackupTimeThe Date-Time of the archive.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.3.40.2.1.6
archiveBackupTypeThis attribute defines the Backup Type of the archive.ro
INTEGER
.1.3.6.1.4.1.21865.1.3.40.2.1.7
archiveBackupNoThis defines the Backup Number for the archive.ro
INTEGER
.1.3.6.1.4.1.21865.1.3.40.2.1.8
archiveOSTypeThe Client OS Type of the archive.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.3.40.2.1.9
archiveErrorMsgThe Error Message for the archive job, if any.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.3.40.2.1.10
archiveElapsedSecThe Elapsed time in seconds for the archive job.ro
INTEGER
.1.3.6.1.4.1.21865.1.3.40.2.1.11
archiveCompressedSet to 1 if the archive is compressed.ro
INTEGER
.1.3.6.1.4.1.21865.1.3.40.2.1.12
archiveEncryptedSet to 1 if the archive is encrypted.ro
INTEGER
.1.3.6.1.4.1.21865.1.3.40.2.1.13
ipmiGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.21865.1.4
coolingGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.21865.1.4.10
coolingDeviceInstancesThis attribute denotes the number of fan sensors available on the systemro
INTEGER
.1.3.6.1.4.1.21865.1.4.10.1
coolingDeviceTableThis object defines the Cooling Device Table.
SEQUENCE OF CoolingDeviceTableEntry
.1.3.6.1.4.1.21865.1.4.10.2
coolingDeviceTableEntryThis object defines the Cooling Device Table Entry
CoolingDeviceTableEntry
.1.3.6.1.4.1.21865.1.4.10.2.1
coolingDeviceIndexThis attribute defines the index (one based) of the cooling device.ro
OneBasedIndex
.1.3.6.1.4.1.21865.1.4.10.2.1.1
coolingDeviceIdThis attribute defines an unique ID for the cooling devicero
INTEGER
.1.3.6.1.4.1.21865.1.4.10.2.1.2
coolingDeviceDescriptionThis attribute textually describes the cooling device.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.4.10.2.1.3
coolingDeviceStatusStringCurrent status of the sensor will be one of the following strings: OK, Error, Degraded or Unknown.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.4.10.2.1.4
coolingDeviceStatusCurrent health status of the sensor.ro
UnitrendsStatus
.1.3.6.1.4.1.21865.1.4.10.2.1.5
coolingDeviceReadingThis attribute contains the current fan sensor reading, measured in the units specified by the Fan Units attribute.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.4.10.2.1.6
coolingDeviceUpperCriticalThresholdThis attribute contains the major error threshold level for the fan. The threshold is given in the units specified by the Fan Units attribute. This attribute may not apply to all fan types.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.4.10.2.1.7
coolingDeviceLowerCriticalThresholdThis attribute contains the lower critical threshold level for the fan. The threshold is given in the units specified by the Fan Units attribute. This attribute may not apply to all fan types.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.4.10.2.1.8
tempGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.21865.1.4.20
temperatureProbeInstancesThis attribute denotes the number of temperature sensors available on the systemro
INTEGER
.1.3.6.1.4.1.21865.1.4.20.1
temperatureProbeTableThis object defines the Temperature Probe Table.
SEQUENCE OF TemperatureProbeTableEntry
.1.3.6.1.4.1.21865.1.4.20.2
temperatureProbeTableEntryThis object defines the Temperature Probe Table Entry.
TemperatureProbeTableEntry
.1.3.6.1.4.1.21865.1.4.20.2.1
temperatureIndexThis attribute defines the index (one based) of the temperature probe.ro
OneBasedIndex
.1.3.6.1.4.1.21865.1.4.20.2.1.1
temperatureDeviceIdThis attribute defines a unique ID for the temperature probe.ro
INTEGER
.1.3.6.1.4.1.21865.1.4.20.2.1.2
temperatureDescriptionThis attribute textually describes the temperature probe.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.4.20.2.1.3
temperatureStatusStringCurrent status of the sensor will be one of the following strings: OK, Error, Degraded or Unknown.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.4.20.2.1.4
temperatureStatusCurrent health status of the sensor.ro
UnitrendsStatus
.1.3.6.1.4.1.21865.1.4.20.2.1.5
temperatureReadingThe present temperature reading of this temperature probe in 1/10th degrees C. 0x8000000 denotes 'unknown'.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.4.20.2.1.6
temperatureUpperCriticalThresholdThe upper critical threshold for the temperature probe, in /10th degrees C. 0x80000000 denotes 'unknown'.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.4.20.2.1.7
temperatureLowerCriticalThresholdThe lower critical threshold for the temperature probe, in 1/10 degrees C. 0x80000000 denotes 'unknown'.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.4.20.2.1.8
voltageGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.21865.1.4.30
voltageProbeInstancesThis attribute denotes the number of voltage sensors available on the systemro
INTEGER
.1.3.6.1.4.1.21865.1.4.30.1
voltageProbeTableThis object defines the Voltage Probe Table.
SEQUENCE OF VoltageProbeTableEntry
.1.3.6.1.4.1.21865.1.4.30.2
voltageProbeTableEntryThis object defines the Voltage Probe Table Entry.
VoltageProbeTableEntry
.1.3.6.1.4.1.21865.1.4.30.2.1
voltageIndexThis attribute defines the index (one based) of the voltage probe.ro
OneBasedIndex
.1.3.6.1.4.1.21865.1.4.30.2.1.1
voltageDeviceIdThis attribute defines an unique ID for the voltage probero
INTEGER
.1.3.6.1.4.1.21865.1.4.30.2.1.2
voltageDescriptionThis attribute textually describes the voltage probe.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.4.30.2.1.3
voltageStatusStringCurrent status of the sensor will be one of the following strings: OK, Error, Degraded or Unknown.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.4.30.2.1.4
voltageStatusCurrent health status of the sensor.ro
UnitrendsStatus
.1.3.6.1.4.1.21865.1.4.30.2.1.5
voltageReadingThe current reading of the voltage probe.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.4.30.2.1.6
voltageUpperCriticalThresholdThe upper critical threshold for the voltage probe, in millivolts.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.4.30.2.1.7
voltageLowerCriticalThresholdThe lower non-critical threshold for the voltage probe, in millivolts.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.4.30.2.1.8
eventlogGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.21865.1.4.40
eventlogProbeInstancesThis attribute denotes the number of event log entries available on the systemro
INTEGER
.1.3.6.1.4.1.21865.1.4.40.1
eventlogProbeTableThis object defines the Voltage Probe Table.
SEQUENCE OF EventLogProbeTableEntry
.1.3.6.1.4.1.21865.1.4.40.2
eventlogProbeTableEntryThis object defines the Temperature Probe Table Entry.
EventLogTableEntry
.1.3.6.1.4.1.21865.1.4.40.2.1
eventlogEntryDescriptionThis object contains the IPMI System Event Log entry description.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.4.40.2.1.2
diskGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.21865.1.5
physdiskGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.21865.1.5.10
physdiskProbeInstancesThis attribute denotes the number of PhysDisk entries available on the systemro
INTEGER
.1.3.6.1.4.1.21865.1.5.10.1
physdiskProbeTableThis object defines the PhysDisk Probe Table.
SEQUENCE OF PhysDiskProbeTableEntry
.1.3.6.1.4.1.21865.1.5.10.2
physdiskProbeTableEntryThis object defines the PhysDisk Probe Table Entry.
PhysDiskProbeTableEntry
.1.3.6.1.4.1.21865.1.5.10.2.1
physdiskIndexThis attribute defines the index (one based) of the physdisk.ro
OneBasedIndex
.1.3.6.1.4.1.21865.1.5.10.2.1.1
physdiskDeviceIdThe unique Device ID of the physical disk.ro
INTEGER
.1.3.6.1.4.1.21865.1.5.10.2.1.2
physdiskDescriptionThe Description for the physical disk.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.5.10.2.1.3
physdiskStatusStringThe StatusString for the physical disk.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.5.10.2.1.4
physdiskStatusThe Status of the physical disk.ro
INTEGER
.1.3.6.1.4.1.21865.1.5.10.2.1.5
physdiskModelThe Model of the physical disk.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.5.10.2.1.6
physdiskSerialNumThe Serial Number of the physical disk.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.5.10.2.1.7
physdiskFirmwareThe Firmware version of the physical disk.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.5.10.2.1.8
physdiskCapacityThe Capacity of the physical disk.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.5.10.2.1.9
physdiskPowerOnHoursThe Power-On-Hours of the physical disk.ro
INTEGER
.1.3.6.1.4.1.21865.1.5.10.2.1.10
physdiskPendingSectorsThe PendingSectors of the physical disk.ro
INTEGER
.1.3.6.1.4.1.21865.1.5.10.2.1.11
physdiskReallocSectorsThe Reallocated Sectors of the physical disk.ro
INTEGER
.1.3.6.1.4.1.21865.1.5.10.2.1.12
physdiskSeekErrorThe Seek Error Rate of the physical disk.ro
INTEGER
.1.3.6.1.4.1.21865.1.5.10.2.1.13
volumeGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.21865.1.5.20
volumeProbeInstancesThis attribute denotes the number of Volume entries available on the systemro
INTEGER
.1.3.6.1.4.1.21865.1.5.20.1
volumeProbeTableThis object defines the Volume Probe Table.
SEQUENCE OF VolumeProbeTableEntry
.1.3.6.1.4.1.21865.1.5.20.2
volumeProbeTableEntryThis object defines the Volume Probe Table Entry.
VolumeProbeTableEntry
.1.3.6.1.4.1.21865.1.5.20.2.1
volumeIndexThis attribute defines the index (one based) of the volume.ro
OneBasedIndex
.1.3.6.1.4.1.21865.1.5.20.2.1.1
volumeDeviceIdThis attribute defines the unique Device ID of the volume.ro
INTEGER
.1.3.6.1.4.1.21865.1.5.20.2.1.2
volumeDescriptionThe Description for the volume.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.5.20.2.1.3
volumeStatusStringThe Status String for the volume.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.5.20.2.1.4
volumeStatusThis attribute defines the Status of the volume.ro
INTEGER
.1.3.6.1.4.1.21865.1.5.20.2.1.5
mgtGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.21865.1.6
mgtInfoAssetIdThis attribute defines the Unitrends Asset ID of the system.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.6.1
mgtInfoHostnameThis attribute defines the Hostname of the system.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.6.2
mgtInfoKernelVersionThis attribute defines the Linux Kernel version of the system.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.6.3
mgtInfoMemoryTotalThis attribute defines Total Memory (MB) on the system.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.6.4
mgtInfoMemoryUsedThis attribute defines Memory Used (MB) on the system.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.6.5
mgtInfoMemoryFreeThis attribute defines Memory Free (MB) on the system.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.6.6
mgtInfoCpuUsedThis attribute defines the percentage of CPU used.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.6.7
mgtInfoBaseboardThis attribute defines the system baseboard model.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.6.8
mgtInfoBiosVersionThis attribute defines the BIOS version on the system.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.6.9
mgtInfoFwVersionThis attribute defines the Firmware version on the system.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.6.10
mgtInfoDhcpModeThis attribute defines the DHCP Mode of the IPMI LAN interface.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.6.11
mgtInfoIpAddressThis attribute defines the IP Address of the IPMI LAN interface.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.6.12
mgtInfoMacAddressThis attribute defines the MAC Address of the IPMI LAN interface.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.6.13
mgtInfoSubnetMaskThis attribute defines the Subnet Mask of the IPMI LAN interface.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.6.14
mgtInfoGatewayIPThis attribute defines the Gateway IP Address of the IPMI LAN interface.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.6.15
mgtInfoGatewayMacThis attribute defines the Gateway MAC Address of the IPMI LAN interface.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.6.16
mgtInfoLanPortThis attribute defines the IPMI LAN interface port used.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.6.17
mgtInfoManufDateThis attribute defines the IPMI Manufacturing Date of the baseboard.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.6.18
mgtInfoReleaseThis attribute defines the Unitrends release version.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.21865.1.6.19
UNITRENDS-SNMP - SNMP MIB Reference | MIBs Explorer