UMC1000TRAPS
AI MIB Summary
Standard SNMP MIB module defining data structures for UMC1000TRAPS.
26
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
26 total| Object Name |
|---|
IMPORTSThis trap indicates that an Alarm or Status Event has occured
in the UMC. The Alarm Details (or TL1 message) must be
examined to determine the severity of the alarm. TRAP-TYPE .1.3.6.1.4.1.2067.1.1.2.0.1 |
umc1TrapTerminalStatusChangeThis trap indicates that the status for one or more terminals
may have changed and therefore the terminal status table needs
to be read again. TRAP-TYPE .1.3.6.1.4.1.2067.1.1.2.0.1000000001 |
umc1TrapTerminalInfoChangeThis trap indicates that the provisioning information for a
terminal has changed. If the sequence number stored in the
first varbind is the next sequential number as known by the
EMS, *AND* the sequence number matches that in the
umc1TerminalInfoChangeSeqNum MIB variable (as fetched from
the UMC), then the corresponding data can be used to update the
EMSs view of the data. Otherwise, it must be assumed that
the EMS has either lost a trap or the SNMP agent has rebooted,
and therefore the EMS must re-read the whole table. TRAP-TYPE .1.3.6.1.4.1.2067.1.1.2.0.1000000002 |
umc1TrapTopologyChangeThis trap indicates that the information in the topology
link table and/or the orphan table may have changed and
therefore these tables need to be read again. TRAP-TYPE .1.3.6.1.4.1.2067.1.1.2.0.1000000003 |
umc1TrapInventoryShelfTableChangeThis trap indicates that umc1InventoryShelfTable has changed.
The location and type of all shelves that have been added to
the system since the last trap was emitted are stored in the
object umc1InventoryShelfTableChangeHistoryData. If the sequence
number stored in the first varbind is the next sequential number
as known by the EMS, *AND* the sequence number matches that in
the umc1InventoryShelfTableChangeSeqNum MIB variable (as fetched
from the UMC), then the corresponding data can be used to update
the EMSs view of the data. Otherwise, it must be assumed that
the EMS has either lost a trap or the SNMP agent has rebooted.
In such a case the EMS must attempt to read a row indexed by
the value of umc1InventoryShelfTableChangeSeqNum (in the varbind)
in the table umc1InventoryShelfTableChangeHistoryTable from
the UMC. If successful, it must update the data in its
umc1InventoryShelfTable with the data it read from such a row
and all other rows in the table indexed by values higher than
the value of umc1InventoryShelfTableChangeSeqNum, if present, till
it reaches the end of the table. Otherwise, the EMS must re-read
the whole umc1InventoryShelfTable from the UMC. TRAP-TYPE .1.3.6.1.4.1.2067.1.1.2.0.1000000004 |
umc1TrapInventoryPluginTableChangeThis trap indicates thatumc1InventoryPluginTable has changed.
The location and plug-in type of all cards that have been added
to the system since the last trap was emitted are stored in the
object umc1InventoryPluginTableChangeHistoryData. If the sequence
number stored in the first varbind is the next sequential number
as known by the EMS, *AND* the sequence number matches that in
the umc1InventoryPluginTableChangeSeqNum MIB variable (as fetched
from the UMC), then the corresponding data can be used to update
the EMSs view of the data. Otherwise, it must be assumed that
the EMS has either lost a trap or the SNMP agent has rebooted.
In such a case the EMS must attempt to read a row indexed by
the value of umc1InventoryPluginTableChangeSeqNum (in the varbind)
in the table umc1InventoryPluginTableChangeHistoryTable from
the UMC. If successful, it must update the data in its
umc1InventoryPluginTable with the data it read from such a row
and all other rows in the table indexed by values higher than
the value of umc1InventoryPluginTableChangeSeqNum, if present,
till it reaches the end of the table. Otherwise, the EMS must
re-read the whole umc1InventoryPluginTable from the UMC. TRAP-TYPE .1.3.6.1.4.1.2067.1.1.2.0.1000000005 |
umc1TrapPitProvChgTableChangeThe trap contains the new row created in the Plug-In Provisioning
Change Table. The management host compares this umc1SystemPitProvChgSeqNbr
value with the last one received to determine if any traps have been lost.
If this value is one greater than the last one received, no traps were lost,
and the management host uses the five octets following the version octet in
umc1SystemPitProvChgData, the second varbind, to retrieve the location and
Plug-in type of the Plug-in whose provisioning data has changed. The value
of the seventh octet in umc1SystemPitProvChgData for the given plug-in
location and plug-in type is defined by 'DbActionType' in UMC1000.MIB.
If the seventh octet indicates the record was deleted it must
delete the plug-in provisioning database record for the given plug-in
location and plug-in type. Otherwise, if the seventh octet indicates the
record added or updated it must retrieve the provisioning database record from
the octets following the seventh octet and update the provisioning data of the
given plug-in location and plug-in type.
If the value of umc1SystemPitProvChgSeqNbr is more than one (1) greater than
the last one received, the management host determines it has lost one or more of
these Traps. The management host attempts to retrieve the entry in the Plug-In
Provisioning Change Table indexed by the last value umc1SystemPitProvChgSeqNbr
received. If this entry cannot be retrieved, the management host determines that
more traps have been lost than the number of entries the Plug-In Provisioning
Change table can store. The management host then reads the entire Plug-In
Provisioning Table to re-sync with that of the agent. TRAP-TYPE .1.3.6.1.4.1.2067.1.1.2.0.1000000006 |
umc1TrapSystemRelearnTrapThis trap indicates that the ACO operation has been performed on the
system. If the sequence number stored in the varbind is the next
sequential number as known by the EMS, and the sequence number matches
that in the umc1SystemRelearnTrapSeqNum MIB variable (as fetched from
the UMC), then the EMS has received all such traps. Otherwise, it must
be assumed that the EMS has either lost such a trap or the SNMP agent has
rebooted. Data in umc1ACOSnapTopologyLinkTable contains the snapshot of
topology information at the time the trap was emitted by the agent. TRAP-TYPE .1.3.6.1.4.1.2067.1.1.2.0.1000000008 |
umc1TrapSysProvChangeThis trap references a row in the System Global Provisioning Change
Table. The management host compares this umc1SystemSysProvChgSeqNbr
value with the last one received to determine if any traps have been
lost. If the this value is one greater than the last one received, no
traps were lost, and the management host uses the data in
umc1SystemSysProvChgData varbind to effect the change in its local
copy. If this value is more than one (1) greater than the last one
received, the management host determines it has lost one or more of
these Traps. The management host attempts to retrieve the entry in
the System Global Provisioning Change Table following that indexed
by the last value umc1SystemSysProvChgSeqNbr received. If this entry
cannot be retrieved, the management host determines that more traps
have been lost than the number of entries the System Global
Provisioning Change table can cache. The management host then reads
the all objects in the Global System Provisioning Object Group to
re-sync with the Agents. If the next entry is retrieved successfully,
the management host continues reading next entries until it has
retrieved the entry indexed by the varbinds in this trap. TRAP-TYPE .1.3.6.1.4.1.2067.1.1.2.0.1000000009 |
umc1TrapTerminalSpanTableChangeThe trap contains the new row created in the umc1TerminalSpanTable.
The management host compares this umc1TerminalSpanChangeSeqNum value with
the last one received to determine if any traps have been lost. If this
value is one greater than the last one received, no traps were lost. TRAP-TYPE .1.3.6.1.4.1.2067.1.1.2.0.1000000010 |
umc1TrapShelfSpanTableChangeThe trap contains the new row created in the umc1ShelfSpanTable The
management host compares this umc1ShelfSpanChangeSeqNum value with
the last one received to determine if any traps have been lost. If
this value is one greater than the last one received, no traps were
lost. TRAP-TYPE .1.3.6.1.4.1.2067.1.1.2.0.1000000011 |
umc1TrapGR303TableChangeThe trap contains the new row created in the umc1GR303ChgTable.
The management host compares this umc1GR303TableChangeSeqNum value
with the last one received to determine if any traps have been lost.
If this value is one greater than the last one received, no traps
were lost. TRAP-TYPE .1.3.6.1.4.1.2067.1.1.2.0.1000000012 |
umc1TrapTR8TableChangeThe trap contains the new row created in the umc1TR8ChgTable.
The management host compares this umc1TR8TableChangeSeqNum value
with the last one received to determine if any traps have been
lost. If this value is one greater than the last one received,
no traps were lost. TRAP-TYPE .1.3.6.1.4.1.2067.1.1.2.0.1000000013 |
umc1TrapXCTableChangeThe trap contains the new row created in the umc1XCChgTable.
The management host compares this umc1XCTableChangeSeqNum value with
the last one received to determine if any traps have been lost. If
this value is one greater than the last one received, no traps were
lost. TRAP-TYPE .1.3.6.1.4.1.2067.1.1.2.0.1000000014 |
umc1TrapAtmProtGrpTableChangeThe trap contains the new row created in the umc1AtmProtGrpChgTable.
The management host compares this umc1AtmProtTableChangeSeqNum value
with the last one received to determine if any traps have been lost.
If this value is one greater than the last one received, no traps
were lost. TRAP-TYPE .1.3.6.1.4.1.2067.1.1.2.0.1000000015 |
umc1TrapPortProfTableChangeThe trap contains the new row created in the umc1PortProfChgTable.
The management host compares this umc1PortProfTableChangeSeqNum value
with the last one received to determine if any traps have been lost.
If this value is one greater than the last one received, no traps
were lost. TRAP-TYPE .1.3.6.1.4.1.2067.1.1.2.0.1000000016 |
umc1TrapV5TableChangeThe trap contains the new row created in the umc1V5ChgTable. The
management host compares this umc1V5TableChangeSeqNum value with
the last one received to determine if any traps have been lost. If
this value is one greater than the last one received, no traps were lost. TRAP-TYPE .1.3.6.1.4.1.2067.1.1.2.0.1000000017 |
umc1TrapSecurityDataTableChangeThe trap contains the new row created in the umc1SecurityDataChgTable.
The management host compares this umc1SecurityDataTableChangeSeqNum
value with the last one received to determine if any traps have been
lost. If this value is one greater than the last one received, no traps
were lost. TRAP-TYPE .1.3.6.1.4.1.2067.1.1.2.0.1000000018 |
umc1TrapFacAlmStringTableChangeThe trap contains the new row created in the
umc1FacAlmStringChgTable. The management host compares this
umc1FacAlmStringTableChangeSeqNum value with the last one
received to determine if any traps have been lost. If this
value is one greater than the last one received, no traps were
lost. TRAP-TYPE .1.3.6.1.4.1.2067.1.1.2.0.1000000019 |
umc1TrapTL1IfProvTableChangeThe trap contains the new row created in the
umc1TL1IfProvChgTable. The management host compares this
umc1TL1IfProvTableChangeSeqNum value with the last one
received to determine if any traps have been lost. If this
value is one greater than the last one received, no traps were
lost. TRAP-TYPE .1.3.6.1.4.1.2067.1.1.2.0.1000000020 |
umc1TrapGenericDbProvChangeThe trap contains the new row created in the
umc1SystemGenericDbProvChgTable. The management host compares this
umc1SystemGenericDbProvTableSeqNum value with the last one
received to determine if any traps have been lost. If this
value is one greater than the last one received, no traps were
lost. TRAP-TYPE .1.3.6.1.4.1.2067.1.1.2.0.1000000021 |
umc1TrapTCAHistoryTableChangeThe trap contains the new row created in the
umc1SystemTCAHistoryTable. The management host compares this
umc1SystemTCAHistoryTableSeqNum value with the last one
received to determine if any traps have been lost. If this
value is one greater than the last one received, no traps were
lost. TRAP-TYPE .1.3.6.1.4.1.2067.1.1.2.0.1000000022 |
umc1F5LoopbackResultThe trap contains the new result of an F5 Loopback request. Because
of the delay in this request, the results come to the EMS as a
trap so we don't have to wait on a SET. TRAP-TYPE .1.3.6.1.4.1.2067.1.1.2.0.1000000023 |
umc1LoopbackDiagnosticsTrapThe trap contains the new result of the LoopCharacteristics
part of a LoopDiagnostic ADSL2+ response. Because
of the delay in this request, the results come to the EMS as a
trap so we don't have to wait on a SET. Remaining results (the
noise parameters) can be retrieved using the umc1LoopDiagnosticsDataRequestTable TRAP-TYPE .1.3.6.1.4.1.2067.1.1.2.0.1000000024 |
umc1TrapSoftwareDiagnosticsThis trap passes software diagnostic messages from the IPMI
card to an external SNMP monitoring device. TRAP-TYPE .1.3.6.1.4.1.2067.1.1.2.0.1100000001 |
umc1TrapAllSeqNbrDumpThis trap passes all sequence numbers from the agent to Management
station. This trap is instantiated when a Management station sends
SNMP GET Request to read all sequence numbers. TRAP-TYPE .1.3.6.1.4.1.2067.1.1.2.0.1100000002 |