UHP-MIB
AI MIB Summary
The UHP-MIB module facilitates the monitoring and management of UHP (Ultra High Performance) terminal hardware, providing access to operational status, interface statistics, and performance counters specific to these specialized terminal devices.
UHP terminal MIB
Main OID:
uhpV32.1.3.6.1.4.1.8000.22
162
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
162 total| Object Name |
|---|
uhp OBJECT IDENTIFIER .1.3.6.1.4.1.8000 |
uhpV32UHP terminal MIB MODULE-IDENTITY .1.3.6.1.4.1.8000.22 |
control OBJECT IDENTIFIER .1.3.6.1.4.1.8000.22.1 |
saveConfigSave current profile to EEPROM profile 0-3. Profile 0 is automativally loaded on restart by default.rw Enumeration .1.3.6.1.4.1.8000.22.1.1 |
rebootReboot device immediately.rw Enumeration .1.3.6.1.4.1.8000.22.1.2 |
commandIssue a command to command-line interface.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8000.22.1.3 |
configEditProfile or global config editing and viewing Complex input format, only for manufacturer.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8000.22.1.4 |
profileGet current profile or run specified profile (1-8).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8000.22.1.5 |
demod1 OBJECT IDENTIFIER .1.3.6.1.4.1.8000.22.2 |
lbandSNR1Signal to noise ratio at L-band demodulator input measured in 0.1 dB units.ro Gauge32 .1.3.6.1.4.1.8000.22.2.1 |
lbandOffset1Frequency offset value in KHz between PLL frequency and carrier real frequency.ro Integer32 .1.3.6.1.4.1.8000.22.2.2 |
inLvl1Current input level x -10dBmro Gauge32 .1.3.6.1.4.1.8000.22.2.3 |
inBytes1Demodulator1 traffic in bytes (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.2.4 |
demod2 OBJECT IDENTIFIER .1.3.6.1.4.1.8000.22.3 |
lbandSNR2Signal to noise ratio at L-band demodulator input measured in 0.1 dB units.ro Gauge32 .1.3.6.1.4.1.8000.22.3.1 |
lbandOffset2Frequency offset value in KHz between PLL frequency and carrier real frequency.ro Integer32 .1.3.6.1.4.1.8000.22.3.2 |
inLvl2Current input level x -10dBmro Gauge32 .1.3.6.1.4.1.8000.22.3.3 |
inBytes2Demodulator2 traffic in bytes (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.3.4 |
modulator OBJECT IDENTIFIER .1.3.6.1.4.1.8000.22.4 |
prioAll OBJECT IDENTIFIER .1.3.6.1.4.1.8000.22.4.1 |
outBytesAModulator traffic in bytes (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.1.1 |
outPktsAModulator traffic in packets (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.1.2 |
dropsAModulator dropped packets (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.1.3 |
queueLenBAModulator queue length in bytes (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.1.4 |
queueLenPAModulator queue length in packets (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.1.5 |
numStationsNumber of stations per ACM channel (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.1.6 |
prioP1 OBJECT IDENTIFIER .1.3.6.1.4.1.8000.22.4.2 |
outBytesP1Modulator P1(Low) priority traffic in bytes (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.2.1 |
outPktsP1Modulator P1(Low) priority traffic in packets (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.2.2 |
dropsP1Modulator P1(Low) priority dropped packets (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.2.3 |
queueLenBP1Modulator P1(Low) priority queue length in bytes (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.2.4 |
queueLenPP1Modulator P1(Low) priority queue length in packets (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.2.5 |
prioP4 OBJECT IDENTIFIER .1.3.6.1.4.1.8000.22.4.3 |
outBytesP4Modulator P4(Med) priority traffic in bytes (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.3.1 |
outPktsP4Modulator P4(Med) priority traffic in packets (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.3.2 |
dropsP4Modulator P4(Med) priority dropped packets (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.3.3 |
queueLenBP4Modulator P4(Med) priority queue length in bytes (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.3.4 |
queueLenPP4Modulator P4(Med) priority queue length in packets (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.3.5 |
prioP7 OBJECT IDENTIFIER .1.3.6.1.4.1.8000.22.4.4 |
outBytesP7Modulator P7(High) priority traffic in bytes (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.4.1 |
outPktsP7Modulator P7(High) priority traffic in packets (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.4.2 |
dropsP7Modulator P7(High) priority dropped packets (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.4.3 |
queueLenBP7Modulator P7(High) priority queue length in bytes (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.4.4 |
queueLenPP7Modulator P7(High) priority queue length in packets (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.4.5 |
prioCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.8000.22.4.5 |
outBytesCModulator control traffic in bytes (index 1 only)ro Counter32 .1.3.6.1.4.1.8000.22.4.5.1 |
outPktsCModulator control traffic in packets (index 1 only)ro Counter32 .1.3.6.1.4.1.8000.22.4.5.2 |
level OBJECT IDENTIFIER .1.3.6.1.4.1.8000.22.4.6 |
txLevelCurrent TX level x -10dBmro Gauge32 .1.3.6.1.4.1.8000.22.4.6.1 |
txLevelDeltaCurrent TX level delta from set level x -10dBmro Integer32 .1.3.6.1.4.1.8000.22.4.6.2 |
txMaxLevelMax TLC level x -10dBmro Integer32 .1.3.6.1.4.1.8000.22.4.6.3 |
prioP2 OBJECT IDENTIFIER .1.3.6.1.4.1.8000.22.4.7 |
outBytesP2Modulator P2 priority traffic in bytes (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.7.1 |
outPktsP2Modulator P2 priority traffic in packets (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.7.2 |
dropsP2Modulator P2 priority dropped packets (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.7.3 |
queueLenBP2Modulator P2 priority queue length in bytes (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.7.4 |
queueLenPP2Modulator P2 priority queue length in packets (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.7.5 |
prioP3 OBJECT IDENTIFIER .1.3.6.1.4.1.8000.22.4.8 |
outBytesP3Modulator P3 priority traffic in bytes (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.8.1 |
outPktsP3Modulator P3 priority traffic in packets (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.8.2 |
dropsP3Modulator P3 priority dropped packets (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.8.3 |
queueLenBP3Modulator P3 priority queue length in bytes (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.8.4 |
queueLenPP3Modulator P3 priority queue length in packets (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.8.5 |
prioP5 OBJECT IDENTIFIER .1.3.6.1.4.1.8000.22.4.9 |
outBytesP5Modulator P5 priority traffic in bytes (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.9.1 |
outPktsP5Modulator P5 priority traffic in packets (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.9.2 |
dropsP5Modulator P5 priority dropped packets (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.9.3 |
queueLenBP5Modulator P5 priority queue length in bytes (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.9.4 |
queueLenPP5Modulator P5 priority queue length in packets (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.9.5 |
prioP6 OBJECT IDENTIFIER .1.3.6.1.4.1.8000.22.4.10 |
outBytesP6Modulator P6 priority traffic in bytes (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.10.1 |
outPktsP6Modulator P6 priority traffic in packets (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.10.2 |
dropsP6Modulator P6 priority dropped packets (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.10.3 |
queueLenBP6Modulator P6 priority queue length in bytes (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.10.4 |
queueLenPP6Modulator P6 priority queue length in packets (indexed by ACM channel)ro Counter32 .1.3.6.1.4.1.8000.22.4.10.5 |
tdma OBJECT IDENTIFIER .1.3.6.1.4.1.8000.22.5 |
tts OBJECT IDENTIFIER .1.3.6.1.4.1.8000.22.5.1 |
tdeltaHUB/Outroute - TTS value Inroute/remote - Timers delta between local station and hub In 10MHz ticks. Developers onlyro Integer32 .1.3.6.1.4.1.8000.22.5.1.1 |
tdtConfidenceHUB/Outroute - TTS confidence value 0-64 Inroute/remote - Tdelta confidence 0-64ro Gauge32 .1.3.6.1.4.1.8000.22.5.1.2 |
softErrorsNumber of soft errors of TTS/Tdelta measurement algorithm. Soft errors mean current value is outside averaged window.ro Counter32 .1.3.6.1.4.1.8000.22.5.1.3 |
hardErrorsNumber of hard errors of TTS/Tdelta measurement algorithm.ro Counter32 .1.3.6.1.4.1.8000.22.5.1.4 |
hubTTSHUB TTS value in 10MHz ticksro Gauge32 .1.3.6.1.4.1.8000.22.5.1.5 |
hubTTSconfidenceHUB TTS confidence value 0-64. It is requested from remotes or inroutesro Gauge32 .1.3.6.1.4.1.8000.22.5.1.6 |
remoteTTSRemote TTS value with compensations in 10MHz ticks. Developers onlyro Gauge32 .1.3.6.1.4.1.8000.22.5.1.7 |
inroute OBJECT IDENTIFIER .1.3.6.1.4.1.8000.22.5.2 |
netStateOperation sequence levelro Enumeration .1.3.6.1.4.1.8000.22.5.2.1 |
frameDelayDelay in frames between TX and RX processing. Developers onlyro Gauge32 .1.3.6.1.4.1.8000.22.5.2.2 |
sectionBWBandwidth in Bits/second of single slot in framero Gauge32 .1.3.6.1.4.1.8000.22.5.2.3 |
netRequestSum of all requests of all stations (slots)ro Gauge32 .1.3.6.1.4.1.8000.22.5.2.4 |
freeSlotsNumber of free-allocated slots in current framero Gauge32 .1.3.6.1.4.1.8000.22.5.2.5 |
netLoadNetwork load in % (values, greater than 100% mean overload)ro Gauge32 .1.3.6.1.4.1.8000.22.5.2.6 |
server OBJECT IDENTIFIER .1.3.6.1.4.1.8000.22.5.3 |
serverStatusServer reply statusro Enumeration .1.3.6.1.4.1.8000.22.5.3.1 |
frameDurationFrame duration in 10M ticksro Gauge32 .1.3.6.1.4.1.8000.22.5.3.2 |
remTable OBJECT IDENTIFIER .1.3.6.1.4.1.8000.22.5.4 |
rxBytesSummary number of bytes, received from this remotero Counter32 .1.3.6.1.4.1.8000.22.5.4.1 |
p1BytesNumber of P1(Low) priority bytes, received from this remotero Counter32 .1.3.6.1.4.1.8000.22.5.4.2 |
p4BytesNumber of P4(Med) priority bytes, received from this remotero Counter32 .1.3.6.1.4.1.8000.22.5.4.3 |
p7BytesNumber of P7(High) priority bytes, received from this remotero Counter32 .1.3.6.1.4.1.8000.22.5.4.4 |
crcErrorsNumber of CRC errors, during reception of this remotero Counter32 .1.3.6.1.4.1.8000.22.5.4.5 |
carrierToNoiseReceive carrier-to-noise ratio of this remote in 0.1 dB stepsro Gauge32 .1.3.6.1.4.1.8000.22.5.4.6 |
freqOffsetReceive Frequency offset of this remote in Hzro Integer32 .1.3.6.1.4.1.8000.22.5.4.7 |
remRecvHubHow this remote receives the hub in 0.1 dB stepsro Gauge32 .1.3.6.1.4.1.8000.22.5.4.8 |
linkStateLink state of this remotero Enumeration .1.3.6.1.4.1.8000.22.5.4.9 |
lastHeardTime in seconds since last burst was received from remote. Developers onlyro Gauge32 .1.3.6.1.4.1.8000.22.5.4.10 |
downTimesHow many times remote changed state to DOWNro Gauge32 .1.3.6.1.4.1.8000.22.5.4.11 |
totalRequestCurrent non-real-time + real-time request from remotero Gauge32 .1.3.6.1.4.1.8000.22.5.4.12 |
nrtRequestCurrent non-real-time request from remotero Gauge32 .1.3.6.1.4.1.8000.22.5.4.13 |
rtmRequestCurrent real-time request from remotero Gauge32 .1.3.6.1.4.1.8000.22.5.4.14 |
currentFPNumber of sections, allocated in current frame plan for remotero Gauge32 .1.3.6.1.4.1.8000.22.5.4.15 |
txLvlCurrent transmit level x -0.1 dBm (1:360 -> -0.1:-36 dBm)ro Gauge32 .1.3.6.1.4.1.8000.22.5.4.16 |
faultsStation faults bitmap: 1-service monitoring local warning (LWRN);2-service monitoring local alarm (LFLT);4-service monitoring network warning (NWRN);8-service monitoring network alarm (NFLT);0x10 system fault (SYST);0x20 reboot fault (REBT);0x40 LAN down (LAN);0x80 RX offset fault (OFFS);0x100 CRC errors (CRC);0x200 TLC fault (TLC)ro Gauge32 .1.3.6.1.4.1.8000.22.5.4.17 |
p2BytesNumber of P2 priority bytes, received from this remotero Counter32 .1.3.6.1.4.1.8000.22.5.4.18 |
p3BytesNumber of P3 priority bytes, received from this remotero Counter32 .1.3.6.1.4.1.8000.22.5.4.19 |
p5BytesNumber of P5 priority bytes, received from this remotero Counter32 .1.3.6.1.4.1.8000.22.5.4.20 |
p6BytesNumber of P6 priority bytes, received from this remotero Counter32 .1.3.6.1.4.1.8000.22.5.4.21 |
station OBJECT IDENTIFIER .1.3.6.1.4.1.8000.22.5.5 |
stationStateRemote initialization sequence levelro Enumeration .1.3.6.1.4.1.8000.22.5.5.1 |
remnrtRequestRequest for non-real-time bandwidth in sectionsro Gauge32 .1.3.6.1.4.1.8000.22.5.5.2 |
remrtRequestRequest for real-time bandwidth in sectionsro Gauge32 .1.3.6.1.4.1.8000.22.5.5.3 |
fpLostLost frame plans numberro Counter32 .1.3.6.1.4.1.8000.22.5.5.4 |
lvlOffsetOffset between reference level and C/N level on hub. Developers onlyro Integer32 .1.3.6.1.4.1.8000.22.5.5.5 |
lvlAdjustTX power level adjustment value in 0.1 dB stepsro Gauge32 .1.3.6.1.4.1.8000.22.5.5.6 |
frqOffsetFrequency offset on hub. Developers onlyro Integer32 .1.3.6.1.4.1.8000.22.5.5.7 |
frqAdjustTX frequency adjustment value in Hz. Developers onlyro Integer32 .1.3.6.1.4.1.8000.22.5.5.8 |
timeOffsetTiming offset on hub in symbolsro Integer32 .1.3.6.1.4.1.8000.22.5.5.9 |
timeAdjustTX timing adjustment value in 10M ticksro Integer32 .1.3.6.1.4.1.8000.22.5.5.10 |
router OBJECT IDENTIFIER .1.3.6.1.4.1.8000.22.6 |
unroutedPktsNumber of packets, router couldn't route anywhere (though they could have been tunneled).ro Counter32 .1.3.6.1.4.1.8000.22.6.1 |
unroutedSourceLast source IP address of unrouted packet.ro IpAddress .1.3.6.1.4.1.8000.22.6.2 |
unroutedDestLast destination IP address of unrouted packet.ro IpAddress .1.3.6.1.4.1.8000.22.6.3 |
outVlanBytesNumber of bytes, transmitted via VLAN. Requires index, which is VLAN number.ro Counter32 .1.3.6.1.4.1.8000.22.6.4 |
inVlanBytesNumber of bytes, received via VLAN. Requires index, which is VLAN number.ro Counter32 .1.3.6.1.4.1.8000.22.6.5 |
outSvlanBytesNumber of bytes, transmitted via SVLAN. Requires index, which is SVLAN number.ro Counter32 .1.3.6.1.4.1.8000.22.6.6 |
inSvlanBytesNumber of bytes, received via SVLAN. Requires index, which is SVLAN number.ro Counter32 .1.3.6.1.4.1.8000.22.6.7 |
inSvlanPacketsNumber of packets, received via SVLAN. Requires index, which is SVLAN number.ro Counter32 .1.3.6.1.4.1.8000.22.6.8 |
shaper OBJECT IDENTIFIER .1.3.6.1.4.1.8000.22.7 |
streamSpeedCurrent speed in Kbits per second of current streamro Counter32 .1.3.6.1.4.1.8000.22.7.1 |
streamP1SpeedCurrent speed in Kbits per second of P1(Low) priority sub-streamro Counter32 .1.3.6.1.4.1.8000.22.7.2 |
streamP4SpeedCurrent speed in Kbits per second of P4(Med) priority sub-streamro Counter32 .1.3.6.1.4.1.8000.22.7.3 |
streamP7SpeedCurrent speed in Kbits per second of P7(High) priority sub-streamro Counter32 .1.3.6.1.4.1.8000.22.7.4 |
streamDelayCurrent packets delay in stream x 0.1sro Gauge32 .1.3.6.1.4.1.8000.22.7.5 |
streamQueueCurrent stream queue length in bytesro Gauge32 .1.3.6.1.4.1.8000.22.7.6 |
streamP2SpeedCurrent speed in Kbits per second of P2 priority sub-streamro Counter32 .1.3.6.1.4.1.8000.22.7.7 |
streamP3SpeedCurrent speed in Kbits per second of P3 priority sub-streamro Counter32 .1.3.6.1.4.1.8000.22.7.8 |
streamP5SpeedCurrent speed in Kbits per second of P5 priority sub-streamro Counter32 .1.3.6.1.4.1.8000.22.7.9 |
streamP6SpeedCurrent speed in Kbits per second of P6 priority sub-streamro Counter32 .1.3.6.1.4.1.8000.22.7.10 |
system OBJECT IDENTIFIER .1.3.6.1.4.1.8000.22.8 |
temperatureCurrent temperaturero Integer32 .1.3.6.1.4.1.8000.22.8.1 |
cpuLoadCurrent CPU load in percentro Gauge32 .1.3.6.1.4.1.8000.22.8.2 |
buffersCurrent buffers usage in percentro Gauge32 .1.3.6.1.4.1.8000.22.8.3 |
redundancyCurrent redundancy statero Enumeration .1.3.6.1.4.1.8000.22.8.4 |
swVersionSoftware version. Four numbers of version contained in four bytes in order of precedence (see as hexadecimal).ro Gauge32 .1.3.6.1.4.1.8000.22.8.5 |
releaseDateRelease date. Two low bytes of number contain year, then month and day (see as hexadecimal).ro Gauge32 .1.3.6.1.4.1.8000.22.8.6 |
mobile OBJECT IDENTIFIER .1.3.6.1.4.1.8000.22.9 |
versionSoftware (protocol) version. Number 10 means V1.0ro Gauge32 .1.3.6.1.4.1.8000.22.9.1 |
serialNumberSerial number of this unit. If printed on the screen should be printed as hexadecimal! Example - 4660 returned should be printed as 1234 in hex.ro Gauge32 .1.3.6.1.4.1.8000.22.9.2 |
inputLevelInput baseband RF level in -0.1dBm steps. 500 means -50 dBm. Higher value means lower level. 800 (-80dBm) means no signal.ro Gauge32 .1.3.6.1.4.1.8000.22.9.3 |
rxStateComposite value to provide controller with receive and overall state. 0 means no RX lock. 1 means absence of coordinates (send location data). 2 means absence of TX status (send TX control command). 3-250 means RX lock and shows demodulator C/N level in 0.1dBm steps (e.g. 100 means C/N=10 dB). Actual in all modes of operation. In SCPC/Star modes shows SCPC demodulator level, in FullMesh mode burst demodulator level.ro Gauge32 .1.3.6.1.4.1.8000.22.9.4 |
searchStateGET Value in percent (0-100) of current carrier search sequence. As search for narrow (<1Msps) carrier with high offset (DRO LNB) can last up-to 30 seconds, controller can wait until the whole acquisition bandwidth is scanned at least once. SET Writing any value restarts search cycle.rw Gauge32 .1.3.6.1.4.1.8000.22.9.5 |
txControlGET Current TX status (0-off, 1-on). SET Writing 0 turns TX off, 1 - turns on.rw Gauge32 .1.3.6.1.4.1.8000.22.9.6 |
locationGET Not applicable. SET NMEA RMC string $GPRMC,hhmmss.ss,A,GGMM.MM,P,gggmm.mm,J,v.v,b.b,ddmmyy,x.x,n,m*hh<CR><LF> Location should be re-supplied if changed more than 1 minute by any coordinate.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8000.22.9.7 |