Telematics-Nevada-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Telematics-Nevada-MIB.
2977
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
2977 total| Object Name |
|---|
telematics OBJECT IDENTIFIER .1.3.6.1.4.1.230 |
RFC1213-MIB Unknown .1.3.6.1.4.1.230 |
tmxNevada OBJECT IDENTIFIER .1.3.6.1.4.1.230.5 |
nevadaSystem OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1 |
nvNodestat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.1 |
nvNodestatTotalbufstotal number of buffers in system
- these buffers are freed at startup time to be allocated
as needed. Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.1.1.1 |
nvNodestatCurminbufsminimum number of buffers available in last 15 minute cycle
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.1.1.2 |
nvNodestatCurmincpucpu availablity -minimum percentage of CPU available in last 15
minute cycle. Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.1.1.3 |
nvNodestatCurtimecurrent time
number of minutes into current time
- is set to 0 at start of current cycle
- is incremented every minute
- when incremented to 15 then cycle is over and curminbuf
and curmincpu are calculated and curtime is set back to 0
Statistic is zeroed at startup time.ro Gauge .1.3.6.1.4.1.230.5.1.1.4 |
nvNodestatFreebufsnumber of available buffers at last check
- check is done every 3 seconds
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.1.1.6 |
nvNodestatFreecpupercentage of CPU available at last check
- check is done every 3 seconds
Statistic is zeroed at startup time.ro Gauge .1.3.6.1.4.1.230.5.1.1.7 |
nvNodestatMaxcpumaximum CPU availablity
maximum count of idle CPU cycles per 16 milliseconds
- percentages of CPU availability are calculated relative
to this number (freecpu,curmincpu,mincpu)
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.1.1.8 |
nvNodestatMinbufsminimum number of buffers
minimum number of available buffers ever recorded
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.1.1.10 |
nvNodestatMincpucpu availablity
minimum percentage of CPU available ever recorded
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.1.1.11 |
nvNodestatRxavgppsaverage rx packets per second
average packets per second received during last 15 minute cycle
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.1.1.12 |
nvNodestatRxcurppscurrent rx packets per second
packets per second received during last 3 second cycle
Statistic is zeroed at startup timero INTEGER .1.3.6.1.4.1.230.5.1.1.13 |
nvNodestatTxavgppsaverage tx packets per second
average packets per second transmitted during last 15 minute cycle
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.1.1.14 |
nvNodestatTxcurppscurrent tx packets per second
packets per second transmitted during last 3 second cycle
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.1.1.15 |
nvNodestatX25callActual number of lcns allocated.ro INTEGER .1.3.6.1.4.1.230.5.1.1.16 |
nvNodestatChgreqidChange Request ID
Confirmation management change request ID.ro INTEGER .1.3.6.1.4.1.230.5.1.1.17 |
nvNodestatCurclkIndicates the current clock source.ro DisplayString .1.3.6.1.4.1.230.5.1.1.18 |
nvNodestatClkfailsNumber of times clock failure has been detected.ro INTEGER .1.3.6.1.4.1.230.5.1.1.19 |
nvNodestatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.1.1.20 |
nvNodestatNumcallsNumber of succesful modem calls received by ITI.ro INTEGER --AF .1.3.6.1.4.1.230.5.1.1.21 |
nvNodeconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.2 |
nvNodeconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.2.1 |
nvNodeconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.2.2 |
nvNodeconfTablenodeconf file. SEQUENCE OF NvNodeconfEntry .1.3.6.1.4.1.230.5.1.2.3 |
nvNodeconfEntrynodeconf record. NvNodeconfEntry .1.3.6.1.4.1.230.5.1.2.3.1 |
nvNodeconfIndexIndex of nodeconf recordro INTEGER .1.3.6.1.4.1.230.5.1.2.3.1.1 |
nvNodeconfPartnumPart Number -partnum- This is the part number of the software
Format: AAAAAA-BBB-C-DDEEFF AAAAAA = Concatenated product code ie.
a 4 link,8 channel switching PAD which has the code 2604-8 becomes
260408 BBB = Customer/feature code C = Medium DD = Major version number. A new set of
documentation is generated for each major version EE = Database version number
FF = Software version number Parameter is set during factory configuration.ro DisplayString .1.3.6.1.4.1.230.5.1.2.3.1.2 |
nvNodeconfDbversionDatabase Version (dbversion)
Major and minor database release numbers Eg 0300
Similar usage as for software revision number
Parameter is set during factory configuration.ro DisplayString .1.3.6.1.4.1.230.5.1.2.3.1.3 |
nvNodeconfSwdateSoftware Creation Date (swdate)
Parameter is set during factory configuration.ro DisplayString .1.3.6.1.4.1.230.5.1.2.3.1.7 |
nvNodeconfSwversionSoftware Version (swversion)
Major and minor software release numbers
Eg. 0601
Parameter is set during factory configuration.ro DisplayString .1.3.6.1.4.1.230.5.1.2.3.1.8 |
nvNodeconfCalarmsMax Custom Alarm Records (calarms)
This field indicates the total num of custom alarm entries
per box.
DO NOT USE HUB-RESERVE3 OR TAKE ANY SPACE AWAY FROM IT TO USE
FOR A NEW FIELD. IT IS THE SECRET HIDING PLACE WHERE THE HARDWARE
CONFIGURATION IS STORED FOR USE IN DETECTING HARDWARE CHANGES WHEN
REBOOTING.
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.1.2.3.1.10 |
nvNodeconfStartupSD Script to automatically start after aprox. 10 seconds system bootrw INTEGER .1.3.6.1.4.1.230.5.1.2.3.1.11 |
nvNodeconfSwtypeINF or SmartView Type (swtype)
sview for old std billing
Default value is sview (0+1).rw Enumeration .1.3.6.1.4.1.230.5.1.2.3.1.12 |
nvNodeconfX25callX.25 Call (nvX25call)
This field indicates the total num of lcn per box
Default value is 257.rw INTEGER .1.3.6.1.4.1.230.5.1.2.3.1.14 |
nvNodeconfAcctrecMax Accounting Records (acctrec)
This indicates the maximum number of accounting records that
will be held in memory. When this number is reached,
additional records will be discarded.
Default value is 100.rw INTEGER .1.3.6.1.4.1.230.5.1.2.3.1.16 |
nvNodeconfAlarmrecMax Alarm Records (alarmrec)
This indicates the maximum number of alarm records buffered
Default value is 50.rw INTEGER .1.3.6.1.4.1.230.5.1.2.3.1.17 |
nvNodeconfBusyoutused to busy out ITI ports when X25 links
go downrw INTEGER .1.3.6.1.4.1.230.5.1.2.3.1.21 |
nvNodeconfRate1Rate For Time Zone 1 (rate1)rw INTEGER .1.3.6.1.4.1.230.5.1.2.3.1.22 |
nvNodeconfRate2Rate For Time Zone 2 (rate2)rw INTEGER .1.3.6.1.4.1.230.5.1.2.3.1.23 |
nvNodeconfRate3Rate For Time Zone 3 (rate3)rw INTEGER .1.3.6.1.4.1.230.5.1.2.3.1.24 |
nvNodeconfRate4Rate For Time Zone 4 (rate4)rw INTEGER .1.3.6.1.4.1.230.5.1.2.3.1.25 |
nvNodeconfNodeidNode Identifier (nodeid)
This field is used by the Network Bus component to identify
this node within a private network,and must be unique within
that domain.
Default value is 1000.rw INTEGER .1.3.6.1.4.1.230.5.1.2.3.1.27 |
nvNodeconfExstatenhanced x25 stat (exstat)rw Enumeration .1.3.6.1.4.1.230.5.1.2.3.1.28 |
nvNodeconfRsttimerRestart timer for OMS
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.1.2.3.1.29 |
nvNodeconfChgreqidChange Request Idrw INTEGER .1.3.6.1.4.1.230.5.1.2.3.1.30 |
nvNodeconfClksrc1Primary clock source to synchronize TDM connects.rw DisplayString .1.3.6.1.4.1.230.5.1.2.3.1.31 |
nvNodeconfClksrc2Primary clock source to synchronize TDM connects.rw DisplayString .1.3.6.1.4.1.230.5.1.2.3.1.32 |
nvNodeconfClksrc3Primary clock source to synchronize TDM connects.rw DisplayString .1.3.6.1.4.1.230.5.1.2.3.1.33 |
nvNodeconfDsprfaildspr failure thresholdrw INTEGER .1.3.6.1.4.1.230.5.1.2.3.1.34 |
nvNodeconfFrmrfailfrmr failure thresholdrw INTEGER .1.3.6.1.4.1.230.5.1.2.3.1.35 |
nvNodeconfQdlifailQdli failure thresholdrw INTEGER .1.3.6.1.4.1.230.5.1.2.3.1.36 |
nvAcctstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.3 |
nvAcctstatMaxRectotal number of records in file.ro INTEGER .1.3.6.1.4.1.230.5.1.3.1 |
nvAcctstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.3.2 |
nvAcctstatTableacctstat file. SEQUENCE OF NvAcctstatEntry .1.3.6.1.4.1.230.5.1.3.3 |
nvAcctstatEntryacctstat record, indexed by record number NvAcctstatEntry .1.3.6.1.4.1.230.5.1.3.3.1 |
nvAcctstatComponentname of component
This is the name of component accumulating the statistics.ro DisplayString .1.3.6.1.4.1.230.5.1.3.3.1.1 |
nvAcctstatRecordrecord ID
This is the internal number of the accounting record.ro INTEGER .1.3.6.1.4.1.230.5.1.3.3.1.2 |
nvAcctstatCalledCalled address (from bcd)ro DisplayString .1.3.6.1.4.1.230.5.1.3.3.1.3 |
nvAcctstatCallingCalling address (from bcd).ro DisplayString .1.3.6.1.4.1.230.5.1.3.3.1.4 |
nvAcctstatRecorgcall origin: 1=iti/lserv 2=x25 .ro Enumeration .1.3.6.1.4.1.230.5.1.3.3.1.5 |
nvAcctstatSegsizesegment size
This is the segment size of this port that generates accounting.
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.1.3.3.1.6 |
nvAcctstatDaydate of call establishment (internal)
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.1.3.3.1.7 |
nvAcctstatMinutetime of call establishment
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.1.3.3.1.8 |
nvAcctstatSecondtime of call establishment
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.1.3.3.1.9 |
nvAcctstatTxpaksnumber transmitted packets
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.1.3.3.1.10 |
nvAcctstat64ktxpaks1000 transmitted packets
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.1.3.3.1.11 |
nvAcctstatRxpaksnumber received packets
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.1.3.3.1.12 |
nvAcctstat64krxpaks1000 received packets
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.1.3.3.1.13 |
nvAcctstatTxcharsnumber transmitted characters
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.1.3.3.1.14 |
nvAcctstat64ktxchars1000 transmitted characters
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.1.3.3.1.15 |
nvAcctstatRxcharsnumber received characters
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.1.3.3.1.16 |
nvAcctstat64krxchars1000 received characters
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.1.3.3.1.17 |
nvAcctstatTxsegsnumber transmitted segments
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.1.3.3.1.18 |
nvAcctstat64ktxsegs1000 transmitted segments
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.1.3.3.1.19 |
nvAcctstatRxsegsnumber received segments
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.1.3.3.1.20 |
nvAcctstat64krxsegs1000 received segments
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.1.3.3.1.21 |
nvAcctstatAbstimestarting absolute time
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.1.3.3.1.22 |
nvAcctstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.1.3.3.1.23 |
nvAcctstatCallidPtr to internal structure that starts accountingro INTEGER .1.3.6.1.4.1.230.5.1.3.3.1.24 |
nvAcctstatInfofuncInformation function ptr provided by accounting entityro INTEGER .1.3.6.1.4.1.230.5.1.3.3.1.25 |
nvAcctoper OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.4 |
nvAcctoperMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.4.1 |
nvAcctoperNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.4.2 |
nvAcctoperTableacctoper file. SEQUENCE OF NvAcctoperEntry .1.3.6.1.4.1.230.5.1.4.3 |
nvAcctoperEntryacctoper record. NvAcctoperEntry .1.3.6.1.4.1.230.5.1.4.3.1 |
nvAcctoperIndexIndex of acctoper recordro INTEGER .1.3.6.1.4.1.230.5.1.4.3.1.1 |
nvAcctoperComponentservice component
This is the name of the component that uses the
accounting service. An example of this is NET1,ITI,etc.
Parameter is set during factory configuration.ro DisplayString .1.3.6.1.4.1.230.5.1.4.3.1.2 |
nvAcctoperEnableenable/disable
This field is used to enable the accounting function.
Default value is true (1+1).rw Enumeration .1.3.6.1.4.1.230.5.1.4.3.1.3 |
nvAcctoperSegsizesegment size
This field defines the size of a segment. A
segment is usually a portion of a packet (ie. 64 bytes)
as is more representative in actual
accounting of resource utilization. The
possible values range from one to the largest
possible packet size.
Default value is 64.rw INTEGER .1.3.6.1.4.1.230.5.1.4.3.1.4 |
nvModemstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.5 |
nvModemstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.5.1 |
nvModemstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.5.2 |
nvModemstatTablemodemstat file. SEQUENCE OF NvModemstatEntry .1.3.6.1.4.1.230.5.1.5.3 |
nvModemstatEntrymodemstat record. NvModemstatEntry .1.3.6.1.4.1.230.5.1.5.3.1 |
nvModemstatIndexIndex of Modemstat recordro INTEGER .1.3.6.1.4.1.230.5.1.5.3.1.1 |
nvModemstatNamedigital modem status name.ro DisplayString .1.3.6.1.4.1.230.5.1.5.3.1.2 |
nvModemstatStateCurrent statero Enumeration .1.3.6.1.4.1.230.5.1.5.3.1.3 |
nvModemstatRatemodem rate in bps.ro Enumeration .1.3.6.1.4.1.230.5.1.5.3.1.4 |
nvModemstatTypemodem modulation scheme.ro Enumeration .1.3.6.1.4.1.230.5.1.5.3.1.5 |
nvModemstatEctypemodem error correction statusro Enumeration .1.3.6.1.4.1.230.5.1.5.3.1.6 |
nvModemstatDctypemodem data compression status.ro Enumeration .1.3.6.1.4.1.230.5.1.5.3.1.7 |
nvModemstatModesynchronous or asynchronous.ro Enumeration .1.3.6.1.4.1.230.5.1.5.3.1.8 |
nvModemstatRxparityreceive parity setting.ro Enumeration .1.3.6.1.4.1.230.5.1.5.3.1.9 |
nvModemstatTxparitytransmit parity setting.ro Enumeration .1.3.6.1.4.1.230.5.1.5.3.1.10 |
nvModemstatAccmsfor async to sync PPP, shows asy char
control maps.ro DisplayString .1.3.6.1.4.1.230.5.1.5.3.1.11 |
nvModemstatMsemodem noise level (mean squared err).ro INTEGER .1.3.6.1.4.1.230.5.1.5.3.1.12 |
nvModemstatRcvlvlModem receive level.ro INTEGER .1.3.6.1.4.1.230.5.1.5.3.1.13 |
nvModemstatRetrainNumber retrains this call.ro INTEGER .1.3.6.1.4.1.230.5.1.5.3.1.14 |
nvModemstatRenegoNumber renegotiations this call.ro INTEGER .1.3.6.1.4.1.230.5.1.5.3.1.15 |
nvModemstatSelftestsoft init selftest result.ro Enumeration .1.3.6.1.4.1.230.5.1.5.3.1.16 |
nvModemstatFirmverFirmware version numberro DisplayString .1.3.6.1.4.1.230.5.1.5.3.1.17 |
nvModemstatModelDSP microcode product code.ro DisplayString .1.3.6.1.4.1.230.5.1.5.3.1.18 |
nvModemstatRxpclearModem clear rx parity (rxpclear)
bit.ro Enumeration .1.3.6.1.4.1.230.5.1.5.3.1.19 |
nvModemstatDspthe name of the DSP allocated.ro DisplayString .1.3.6.1.4.1.230.5.1.5.3.1.20 |
nvModemstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.1.5.3.1.21 |
nvModemconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.6 |
nvModemconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.6.1 |
nvModemconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.6.2 |
nvModemconfTablemodemconf file. SEQUENCE OF NvModemconfEntry .1.3.6.1.4.1.230.5.1.6.3 |
nvModemconfEntrymodemconf record. NvModemconfEntry .1.3.6.1.4.1.230.5.1.6.3.1 |
nvModemconfIndexIndex of modemconf recordro INTEGER .1.3.6.1.4.1.230.5.1.6.3.1.1 |
nvModemconfNameDigital modem resource config name (name)
Parameter is set during factory configuration.ro DisplayString .1.3.6.1.4.1.230.5.1.6.3.1.2 |
nvModemconfProfilenameDigital modemprof name that it is associated withrw DisplayString .1.3.6.1.4.1.230.5.1.6.3.1.4 |
nvModemconfEnableEnabled or not.rw Enumeration .1.3.6.1.4.1.230.5.1.6.3.1.5 |
nvModemconfStatusOperation status. Add the record to the table (valid) or delete
the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.1.6.3.1.20 |
nvSymuser OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.7 |
nvSymuserMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.7.1 |
nvSymuserNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.7.2 |
nvSymuserTablesymuser file. SEQUENCE OF NvSymuserEntry .1.3.6.1.4.1.230.5.1.7.3 |
nvSymuserEntrysymuser record. NvSymuserEntry .1.3.6.1.4.1.230.5.1.7.3.1 |
nvSymuserIndexIndex of symuser recordro INTEGER .1.3.6.1.4.1.230.5.1.7.3.1.1 |
nvSymuserUsernameUser Name (username)
Name of user allowed to use system management functions.
The System Manager Interface attempts to match
the call user data
field of an incoming call
against the entries in this file.
If no match is found,
the call is cleared.rw DisplayString .1.3.6.1.4.1.230.5.1.7.3.1.2 |
nvSymuserPasswordUser Password (password)
User password. After a user name is matched,the user is asked
to enter their assigned password.
If it is not entered correctly,the call is cleared.rw DisplayString .1.3.6.1.4.1.230.5.1.7.3.1.3 |
nvSymuserStatusOperation status. Add the record to the table (valid) or delete
the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.1.7.3.1.5 |
nvNmsuser OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.8 |
nvNmsuserMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.8.1 |
nvNmsuserNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.8.2 |
nvNmsuserTablenmsuser file. SEQUENCE OF NvNmsuserEntry .1.3.6.1.4.1.230.5.1.8.3 |
nvNmsuserEntrynmsuser record. NvNmsuserEntry .1.3.6.1.4.1.230.5.1.8.3.1 |
nvNmsuserIndexIndex of nmsuser recordro INTEGER .1.3.6.1.4.1.230.5.1.8.3.1.1 |
nvNmsuserCalladdrNMS X.121 Address (calladdr)rw DisplayString .1.3.6.1.4.1.230.5.1.8.3.1.2 |
nvNmsuserCalldataNMS Userdata (calldata)
Default value is 0.rw DisplayString .1.3.6.1.4.1.230.5.1.8.3.1.3 |
nvNmsuserPasswordNMS Component Password (password)
Default value is 0.rw DisplayString .1.3.6.1.4.1.230.5.1.8.3.1.4 |
nvNmsuserPsizPacket Size (psiz)
Default value is 7+1.rw Enumeration .1.3.6.1.4.1.230.5.1.8.3.1.5 |
nvNmsuserWsizWindow Size (wsiz)
Default value is 2.rw INTEGER .1.3.6.1.4.1.230.5.1.8.3.1.6 |
nvNmsuserRpoacodeRPOA Code (rpoacode)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.1.8.3.1.7 |
nvNmsuserOchrgOutgoing Charging Restriction (ochrg)
Default value is 1+1.rw Enumeration .1.3.6.1.4.1.230.5.1.8.3.1.8 |
nvNmsuserCugClosed User Group Id (cug)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.1.8.3.1.9 |
nvNmsuserTputThroughput Class (tput)
Default value is 10+1.rw Enumeration .1.3.6.1.4.1.230.5.1.8.3.1.10 |
nvNmsuserNmsidNMS Identification (nmsid)rw DisplayString .1.3.6.1.4.1.230.5.1.8.3.1.11 |
nvNmsuserStatusOperation status. Add the record to the table (valid) or delete
the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.1.8.3.1.12 |
nvNetmap OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.9 |
nvNetmapMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.9.1 |
nvNetmapNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.9.2 |
nvNetmapTablenetmap file. SEQUENCE OF NvNetmapEntry .1.3.6.1.4.1.230.5.1.9.3 |
nvNetmapEntrynetmap record. NvNetmapEntry .1.3.6.1.4.1.230.5.1.9.3.1 |
nvNetmapIndexIndex of netmap recordro INTEGER .1.3.6.1.4.1.230.5.1.9.3.1.1 |
nvNetmapNetaddrNetwork X.121 Address (netaddr)
This field contains the network address
pattern that is matched against the the
network address field in a 'call request'.rw DisplayString .1.3.6.1.4.1.230.5.1.9.3.1.2 |
nvNetmapUserdataUser Data (userdata)
This field contains the call user data
pattern that is matched against the call user
data field in a 'call request'.rw DisplayString .1.3.6.1.4.1.230.5.1.9.3.1.3 |
nvNetmapNodeidNode Identifier (nodeid)
This parameter is the identifier of the entity
providing the service for a
matched network address and user data.rw INTEGER .1.3.6.1.4.1.230.5.1.9.3.1.4 |
nvNetmapStatusOperation status. Add the record to the table (valid) or delete
the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.1.9.3.1.5 |
nvNetroute OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.10 |
nvNetrouteMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.10.1 |
nvNetrouteNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.10.2 |
nvNetrouteTablenetroute file. SEQUENCE OF NvNetrouteEntry .1.3.6.1.4.1.230.5.1.10.3 |
nvNetrouteEntrynetroute record. NvNetrouteEntry .1.3.6.1.4.1.230.5.1.10.3.1 |
nvNetrouteIndexIndex of netroute recordro INTEGER .1.3.6.1.4.1.230.5.1.10.3.1.1 |
nvNetrouteNodeidNode Identifier (nodeid)
This parameter is an identifier of destination node.
This value was located in NETMAP.rw INTEGER .1.3.6.1.4.1.230.5.1.10.3.1.2 |
nvNetrouteServiceService Component (service)
This parameter is an index into component table
of component providing the service.rw DisplayString .1.3.6.1.4.1.230.5.1.10.3.1.3 |
nvNetroutePrioRoute Priority (prio)
This parameter represents the user-assigned
priority of the route.
The router searches this file for the highest priority route that
will allow more connections.
If the highest priority route is unavailable,the next highest
is tried until all possibilities are exhausted and the call
is cleared.
Default value is 100.rw INTEGER .1.3.6.1.4.1.230.5.1.10.3.1.4 |
nvNetrouteStatusOperation status. Add the record to the table (valid) or delete
the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.1.10.3.1.5 |
nvNetpvc OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.11 |
nvNetpvcMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.11.1 |
nvNetpvcNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.11.2 |
nvNetpvcTablenetpvc file. SEQUENCE OF NvNetpvcEntry .1.3.6.1.4.1.230.5.1.11.3 |
nvNetpvcEntrynetpvc record. NvNetpvcEntry .1.3.6.1.4.1.230.5.1.11.3.1 |
nvNetpvcIndexIndex of netpvc recordro INTEGER .1.3.6.1.4.1.230.5.1.11.3.1.1 |
nvNetpvcServiceService Component (service)
COMPID and PVCID together uniquely identify one end of
a PVC,and make up the key to this file when searching
for an 'A' end.rw DisplayString .1.3.6.1.4.1.230.5.1.11.3.1.2 |
nvNetpvcPvcidLocal PVC Identifier (pvcid)rw INTEGER .1.3.6.1.4.1.230.5.1.11.3.1.3 |
nvNetpvcPvccodeGlobal PVC Identifier (pvccode)
PVCCODE uniquely identifies a PVC,and is used as the key
to this file when searching for a 'B' end.rw INTEGER .1.3.6.1.4.1.230.5.1.11.3.1.4 |
nvNetpvcPvcendPVC End (pvcend)
Default value is 2+1.rw Enumeration .1.3.6.1.4.1.230.5.1.11.3.1.5 |
nvNetpvcStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.1.11.3.1.6 |
nvNetpvcmap OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.12 |
nvNetpvcmapMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.12.1 |
nvNetpvcmapNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.12.2 |
nvNetpvcmapTablenetpvcmap file. SEQUENCE OF NvNetpvcmapEntry .1.3.6.1.4.1.230.5.1.12.3 |
nvNetpvcmapEntrynetpvcmap record. NvNetpvcmapEntry .1.3.6.1.4.1.230.5.1.12.3.1 |
nvNetpvcmapIndexIndex of netpvcmap recordro INTEGER .1.3.6.1.4.1.230.5.1.12.3.1.1 |
nvNetpvcmapPvccodeGlobal PVC Identifier (pvccode)rw INTEGER .1.3.6.1.4.1.230.5.1.12.3.1.2 |
nvNetpvcmapNodeidNode Identifier (nodeid)
This parameter is the identifier of the entity
providing 'B' end of a PVC within our network.rw INTEGER .1.3.6.1.4.1.230.5.1.12.3.1.3 |
nvNetpvcmapStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.1.12.3.1.10 |
nvNetcon OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.13 |
nvNetconMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.13.1 |
nvNetconNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.13.2 |
nvNetconTablenetcon file. SEQUENCE OF NvNetconEntry .1.3.6.1.4.1.230.5.1.13.3 |
nvNetconEntrynetcon record, indexed by record number NvNetconEntry .1.3.6.1.4.1.230.5.1.13.3.1 |
nvNetconIndexIndex of netcon recordro INTEGER .1.3.6.1.4.1.230.5.1.13.3.1.1 |
nvNetconSrccompidsource component id
Originating component of the connection.ro DisplayString .1.3.6.1.4.1.230.5.1.13.3.1.2 |
nvNetconDstcompiddestination component id
Receiving component of the connection.ro DisplayString .1.3.6.1.4.1.230.5.1.13.3.1.3 |
nvNetconCallingadcalling network address (from bcd)
The calling network address.ro DisplayString .1.3.6.1.4.1.230.5.1.13.3.1.4 |
nvNetconCalledadcalled network address (from bcd)
The called network address.ro DisplayString .1.3.6.1.4.1.230.5.1.13.3.1.5 |
nvNetconConstateconnection state
The actual state of this connection.
Initial status is 1.ro Enumeration .1.3.6.1.4.1.230.5.1.13.3.1.6 |
nvNetconConidInternal Network connection identifier.ro DisplayString .1.3.6.1.4.1.230.5.1.13.3.1.7 |
nvNetconSrcidInternal Source identifier.ro DisplayString .1.3.6.1.4.1.230.5.1.13.3.1.8 |
nvNetconDstidInternal Destination identifier.ro DisplayString .1.3.6.1.4.1.230.5.1.13.3.1.9 |
nvRoutemap OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.14 |
nvRoutemapMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.14.1 |
nvRoutemapNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.14.2 |
nvRoutemapTableroutemap file. SEQUENCE OF NvRoutemapEntry .1.3.6.1.4.1.230.5.1.14.3 |
nvRoutemapEntryroutemap record. NvRoutemapEntry .1.3.6.1.4.1.230.5.1.14.3.1 |
nvRoutemapIndexIndex of routemap recordro INTEGER .1.3.6.1.4.1.230.5.1.14.3.1.1 |
nvRoutemapAddrstrAddress string to be translated (addrstr).rw DisplayString .1.3.6.1.4.1.230.5.1.14.3.1.2 |
nvRoutemapAddrtypeHow to interpret addrstr (addrtype).rw Enumeration .1.3.6.1.4.1.230.5.1.14.3.1.3 |
nvRoutemapNetaddrNetaddr yielded by match with addrstr.rw DisplayString .1.3.6.1.4.1.230.5.1.14.3.1.4 |
nvRoutemapUserdataUserdata yielded by match with addrstr.rw DisplayString .1.3.6.1.4.1.230.5.1.14.3.1.5 |
nvRoutemapStatusOperation status. Add the record to the table (valid) or delete
the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.1.14.3.1.6 |
nvMediastat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.15 |
nvMediastatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.15.1 |
nvMediastatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.15.2 |
nvMediastatTableMediastat file. SEQUENCE OF NvMediastatEntry .1.3.6.1.4.1.230.5.1.15.3 |
nvMediastatEntryMediastat record. NvMediastatEntry .1.3.6.1.4.1.230.5.1.15.3.1 |
nvMediastatIndexIndex of mediastat recordro INTEGER .1.3.6.1.4.1.230.5.1.15.3.1.1 |
nvMediastatOrigimageoriginal boot image.ro Enumeration .1.3.6.1.4.1.230.5.1.15.3.1.2 |
nvMediastatImagecurrent boot image.rw Enumeration .1.3.6.1.4.1.230.5.1.15.3.1.3 |
nvMediastatDebugdebug flag.rw Enumeration .1.3.6.1.4.1.230.5.1.15.3.1.4 |
nvMediastatImagechgauto image change.rw Enumeration .1.3.6.1.4.1.230.5.1.15.3.1.5 |
nvMediastatDumpdump flag.rw Enumeration .1.3.6.1.4.1.230.5.1.15.3.1.6 |
nvMediastatImage1dbside0 database version.ro DisplayString .1.3.6.1.4.1.230.5.1.15.3.1.7 |
nvMediastatImage1swside0 software version.ro DisplayString .1.3.6.1.4.1.230.5.1.15.3.1.8 |
nvMediastatImage2dbside1 database version.ro DisplayString .1.3.6.1.4.1.230.5.1.15.3.1.9 |
nvMediastatImage2swside1 software version.ro DisplayString .1.3.6.1.4.1.230.5.1.15.3.1.10 |
nvMediastatMediasizestorage medium size.ro Enumeration .1.3.6.1.4.1.230.5.1.15.3.1.11 |
nvTnnlconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.16 |
nvTnnlconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.16.1 |
nvTnnlconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.16.2 |
nvTnnlconfTableBackhaul instance table definition. SEQUENCE OF NvTnnlconfEntry .1.3.6.1.4.1.230.5.1.16.3 |
nvTnnlconfEntryA tunnel table entry containing objects which
configure a tunnel protocol. NvTnnlconfEntry .1.3.6.1.4.1.230.5.1.16.3.1 |
nvTnnlconfIndexBackhaul configuration entry index number.ro INTEGER .1.3.6.1.4.1.230.5.1.16.3.1.1 |
nvTnnlconfPortnamePort name (portname)rw DisplayString .1.3.6.1.4.1.230.5.1.16.3.1.2 |
nvTnnlconfRsrcpoolResource pool name.rw DisplayString .1.3.6.1.4.1.230.5.1.16.3.1.3 |
nvTnnlconfLineprotBackhaul line protocol.rw Enumeration .1.3.6.1.4.1.230.5.1.16.3.1.5 |
nvTnnlconfProtBackhaul line protocol.rw Enumeration .1.3.6.1.4.1.230.5.1.16.3.1.6 |
nvTnnlconfRtmethodBackhaul routing protocol.rw Enumeration .1.3.6.1.4.1.230.5.1.16.3.1.7 |
nvTnnlconfNetaddrBackhaul network address when rtmethod is useconfig.rw DisplayString .1.3.6.1.4.1.230.5.1.16.3.1.9 |
nvTnnlconfUserdataBackhaul configuration user data.rw DisplayString .1.3.6.1.4.1.230.5.1.16.3.1.10 |
nvTnnlconfStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.1.16.3.1.11 |
nvTnnlstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.17 |
nvTnnlstatfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.17.1 |
nvTnnlstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.17.2 |
nvTnnlstatTableBackhaul instance status table definition. SEQUENCE OF NvTnnlstatEntry .1.3.6.1.4.1.230.5.1.17.3 |
nvTnnlstatEntryA tunnel status table entry containing fields which
store tunnel status information. NvTnnlstatEntry .1.3.6.1.4.1.230.5.1.17.3.1 |
nvTnnlstatIndexBackhaul status entry index number.ro INTEGER .1.3.6.1.4.1.230.5.1.17.3.1.1 |
nvTnnlstatPortnamePort on which this Backhaul status entry is applied.ro DisplayString .1.3.6.1.4.1.230.5.1.17.3.1.2 |
nvTnnlstatRsrcpoolResource pool on which this Backhaul status entry
is applied.ro DisplayString .1.3.6.1.4.1.230.5.1.17.3.1.3 |
nvTnnlstatConnstatCurrent connection status.ro Enumeration .1.3.6.1.4.1.230.5.1.17.3.1.4 |
nvTnnlstatRtstringString upon which routing was based.ro DisplayString .1.3.6.1.4.1.230.5.1.17.3.1.5 |
nvTnnlstatNetaddrNetwork address to which call was routed.ro DisplayString .1.3.6.1.4.1.230.5.1.17.3.1.6 |
nvTnnlstatUserdataUser data to which call was routed.ro DisplayString .1.3.6.1.4.1.230.5.1.17.3.1.7 |
nvTnnlstatCallattsNo of attempts to place current call.ro Counter .1.3.6.1.4.1.230.5.1.17.3.1.9 |
nvTnnlstatCallattfsNo of failed attempts to place current call.ro Counter .1.3.6.1.4.1.230.5.1.17.3.1.10 |
nvTnnlstatInframesNo of frames switched from line to tunnel route.ro Counter .1.3.6.1.4.1.230.5.1.17.3.1.11 |
nvTnnlstatOutframesNo of frames switched from tunnel route to line.ro Counter .1.3.6.1.4.1.230.5.1.17.3.1.12 |
nvTnnlstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.1.17.3.1.13 |
nvCDLITableDLI configuration table definition.The actual database
contains 17 tables, if a DLI card is plugged in
one of the slot then the data table matched the
slot will become active, otherwise the record is
not active. This table combines 17 tables into one
MIB table which uses two table instances: slot
and port. SEQUENCE OF NvCDLIEntry .1.3.6.1.4.1.230.5.1.18 |
nvCDLIEntryDLI configuration record. NvCDLIEntry .1.3.6.1.4.1.230.5.1.18.1 |
nvCDLISlotIndexCDLI slot index number.ro INTEGER .1.3.6.1.4.1.230.5.1.18.1.1 |
nvCDLIPortIndexCDLI card port index number.ro INTEGER .1.3.6.1.4.1.230.5.1.18.1.2 |
nvCDLINameThe name of the DLI card port such as CDLI1_I2.ro DisplayString .1.3.6.1.4.1.230.5.1.18.1.3 |
nvCDLIFormatFrame format.rw Enumeration .1.3.6.1.4.1.230.5.1.18.1.4 |
nvCDLICodeCode format.rw Enumeration .1.3.6.1.4.1.230.5.1.18.1.5 |
nvCDLIFdlFacilities data link format.rw Enumeration .1.3.6.1.4.1.230.5.1.18.1.6 |
nvCDLISignalingSignal type.rw Enumeration .1.3.6.1.4.1.230.5.1.18.1.7 |
nvCDLILineimpLine impedance.rw Enumeration .1.3.6.1.4.1.230.5.1.18.1.8 |
nvCDLIEnablePort enable.rw Enumeration .1.3.6.1.4.1.230.5.1.18.1.9 |
nvCDLICsudsucsudsu enabled or not.rw Enumeration .1.3.6.1.4.1.230.5.1.18.1.10 |
nvCDLIAttenAttenuation of the line .rw Enumeration .1.3.6.1.4.1.230.5.1.18.1.11 |
nvCDLIGainGain of the receiver.rw Enumeration .1.3.6.1.4.1.230.5.1.18.1.12 |
nvCDLIDataInverData inversion enabled or not.rw Enumeration .1.3.6.1.4.1.230.5.1.18.1.13 |
nvSDLITableDLI statistics table definition.The actual database
contains 17 tables, if a DLI card is plugged in
one of the slot then the data table matched the
slot will become active, otherwise the record is
not active. This table combines 17 tables into one
MIB table which uses two table instances: slot
and port. SEQUENCE OF NvSDLIEntry .1.3.6.1.4.1.230.5.1.19 |
nvSDLIEntryDLI statistics record. NvSDLIEntry .1.3.6.1.4.1.230.5.1.19.1 |
nvSDLISlotIndexSDLI slot index number.ro INTEGER .1.3.6.1.4.1.230.5.1.19.1.1 |
nvSDLIPortIndexSDLI card port index number.ro INTEGER .1.3.6.1.4.1.230.5.1.19.1.2 |
nvSDLISdlinmSDLI entry name such as SDLI1_I2.ro DisplayString .1.3.6.1.4.1.230.5.1.19.1.3 |
nvSDLIDlitypeSDLI card port type such as E1 or T1.ro DisplayString .1.3.6.1.4.1.230.5.1.19.1.4 |
nvSDLICurstateSDLI card port current device state.ro Enumeration .1.3.6.1.4.1.230.5.1.19.1.5 |
nvSDLIRedcntsSDLI card port red alarm count.ro Counter .1.3.6.1.4.1.230.5.1.19.1.6 |
nvSDLIYelcntsSDLI card port yellow alarm count.ro Counter .1.3.6.1.4.1.230.5.1.19.1.7 |
nvSDLIBlucntsSDLI card port blue alarm count.ro Counter .1.3.6.1.4.1.230.5.1.19.1.8 |
nvSDLIErrcntSDLI card port crc alarm count.ro Counter .1.3.6.1.4.1.230.5.1.19.1.9 |
nvSDLITxundrunTX underrun count.ro Counter --AF .1.3.6.1.4.1.230.5.1.19.1.10 |
nvSDLIRxfrmslpRX Slip count.ro Counter --AF .1.3.6.1.4.1.230.5.1.19.1.11 |
nvSDLIDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.1.19.1.12 |
nvUgconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.20 |
nvUgconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.20.1 |
nvUgconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.20.2 |
nvUgconfTableDevice usage group configuration table. SEQUENCE OF NvUgconfEntry .1.3.6.1.4.1.230.5.1.20.3 |
nvUgconfEntryDevice usage group configuration record. NvUgconfEntry .1.3.6.1.4.1.230.5.1.20.3.1 |
nvUgconfIndexUsage group entry index number.ro INTEGER .1.3.6.1.4.1.230.5.1.20.3.1.1 |
nvUgconfNameUsage group entry name.rw DisplayString .1.3.6.1.4.1.230.5.1.20.3.1.5 |
nvUgconfPoolUsage group entry resource pool name.rw DisplayString .1.3.6.1.4.1.230.5.1.20.3.1.8 |
nvUgconfNumrsrvdNumber of devices reserved for this entry.rw INTEGER .1.3.6.1.4.1.230.5.1.20.3.1.11 |
nvUgconfThreshldAllocation of disallowance thrreshold for this entry.rw INTEGER .1.3.6.1.4.1.230.5.1.20.3.1.14 |
nvUgconfMaxbwMaximum bandwidth allocated to this entry.rw INTEGER .1.3.6.1.4.1.230.5.1.20.3.1.17 |
nvUgconfStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.1.20.3.1.20 |
nvUgstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.21 |
nvUgstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.21.1 |
nvUgstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.21.2 |
nvUgstatTableDevice usage group statistics table. SEQUENCE OF NvUgstatEntry .1.3.6.1.4.1.230.5.1.21.3 |
nvUgstatEntryDevice usage group statistics record. NvUgstatEntry .1.3.6.1.4.1.230.5.1.21.3.1 |
nvUgstatIndexUsage group statistics entry index number.ro INTEGER .1.3.6.1.4.1.230.5.1.21.3.1.1 |
nvUgstatNameUsage group statistics entry name.ro DisplayString .1.3.6.1.4.1.230.5.1.21.3.1.2 |
nvUgstatPoolUsage group statistics entry resource pool name.ro DisplayString .1.3.6.1.4.1.230.5.1.21.3.1.3 |
nvUgstatNumusedNumber of devices allocated to this group.ro INTEGER .1.3.6.1.4.1.230.5.1.21.3.1.4 |
nvUgstatBwusedAmount of bandwidth allocated to this group.ro INTEGER .1.3.6.1.4.1.230.5.1.21.3.1.5 |
nvUgstatBwrejsRejections to this group due to bandwidth restrain.ro Counter .1.3.6.1.4.1.230.5.1.21.3.1.6 |
nvUgstatUnavrejsRejections to this group due to device unavailability.ro Counter .1.3.6.1.4.1.230.5.1.21.3.1.7 |
nvUgstatThresrejsRejections to this group due to threshold restriction.ro Counter .1.3.6.1.4.1.230.5.1.21.3.1.8 |
nvUgstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.1.21.3.1.9 |
nvDrstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.22 |
nvDrstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.22.1 |
nvDrstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.22.2 |
nvDrstatTableDevice pool registry statistics. SEQUENCE OF NvDrstatEntry .1.3.6.1.4.1.230.5.1.22.3 |
nvDrstatEntryDevice pool registry statistics record. NvDrstatEntry .1.3.6.1.4.1.230.5.1.22.3.1 |
nvDrstatIndexDevice pool registry statistics entry index number.ro INTEGER .1.3.6.1.4.1.230.5.1.22.3.1.1 |
nvDrstatNameDevice pool registry statistics entry name.ro DisplayString .1.3.6.1.4.1.230.5.1.22.3.1.2 |
nvDrstatClassDevice class of this pool.ro Enumeration .1.3.6.1.4.1.230.5.1.22.3.1.3 |
nvDrstatNumdevNumber of devices registered to this pool.ro INTEGER .1.3.6.1.4.1.230.5.1.22.3.1.4 |
nvDrstatNumrsrvdNumber of devices reserved to this pool.ro INTEGER .1.3.6.1.4.1.230.5.1.22.3.1.5 |
nvDrstatNumavailNumber of devices available for allocation.ro INTEGER .1.3.6.1.4.1.230.5.1.22.3.1.6 |
nvDrstatNumusedNumber of devices presently allocated for use.ro INTEGER .1.3.6.1.4.1.230.5.1.22.3.1.7 |
nvDrstatMaxusedMaximum number of numused since last box reset.ro INTEGER .1.3.6.1.4.1.230.5.1.22.3.1.8 |
nvDrstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.1.22.3.1.9 |
nvCFRMRTableFramer card configuration table definition. The actual
framer card database has 17 tables. Each table uses name
convention: CFRMR plus slot number. Each framer card has
two static WAN ports and 128 smart ports. This table will
combine 17 databases into one table. In order to support
the actual framer card configuration, this table requires
two instances: slot and port number. SEQUENCE OF NvCFRMREntry .1.3.6.1.4.1.230.5.1.23 |
nvCFRMREntryFramer card configuration record definition. The total
record number is 17. If there is a framer card plugged in
one of the slot, then the corresponding framer record is
active. Otherwise the record is not active. NvCFRMREntry .1.3.6.1.4.1.230.5.1.23.1 |
nvCFRMRSlotIndexFramer card slot number.ro INTEGER .1.3.6.1.4.1.230.5.1.23.1.1 |
nvCFRMRPortIndexFor static port, the index number is from 1 to 2.
For smart port type, the index number is from 3 to 130.ro INTEGER .1.3.6.1.4.1.230.5.1.23.1.2 |
nvCFRMRNameThe name of a framer card port.ro DisplayString .1.3.6.1.4.1.230.5.1.23.1.3 |
nvCFRMRRateFramer card port baud rate.rw Enumeration .1.3.6.1.4.1.230.5.1.23.1.7 |
nvCFRMREIAtypePort interface type.rw Enumeration .1.3.6.1.4.1.230.5.1.23.1.10 |
nvCFRMRClkmodePort clock mode.rw Enumeration .1.3.6.1.4.1.230.5.1.23.1.13 |
nvCFRMRDebounceWAN port eia debounce interval.rw INTEGER .1.3.6.1.4.1.230.5.1.23.1.16 |
nvCFRMREnableEnable or disable port.rw Enumeration .1.3.6.1.4.1.230.5.1.23.1.19 |
nvSFRMRTableFramer card statistics table definition. The actual
framer card database has 17 tables. Each table uses name
convention: SFRMR plus slot number. Each framer card has
two static WAN ports and 128 smart ports. This table will
combine 17 databases into one table. In order to support
the actual framer card configuration, this table requires
two instances: slot and port number. SEQUENCE OF NvSFRMREntry .1.3.6.1.4.1.230.5.1.24 |
nvSFRMREntryFramer card statistics record definition. The total
record number is 17. If there is a framer card plugged in
one of the slot, then the corresponding framer record is
active. Otherwise the record is not active. NvSFRMREntry .1.3.6.1.4.1.230.5.1.24.1 |
nvSFRMRSlotIndexFramer card slot number.ro INTEGER .1.3.6.1.4.1.230.5.1.24.1.1 |
nvSFRMRPortIndexFor static port, the index number is from 1 to 2.
For smart port type, the index number is from 3 to 130.ro INTEGER .1.3.6.1.4.1.230.5.1.24.1.2 |
nvSFRMRNameThe name of a framer card port.ro DisplayString .1.3.6.1.4.1.230.5.1.24.1.3 |
nvSFRMRModeThe operation mode.ro Enumeration .1.3.6.1.4.1.230.5.1.24.1.4 |
nvSFRMRStateThe operation state.ro Enumeration .1.3.6.1.4.1.230.5.1.24.1.5 |
nvSFRMRRateFramer card port baud rate.ro Enumeration .1.3.6.1.4.1.230.5.1.24.1.6 |
nvSFRMRCidCircuit ID of Munich ports.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.230.5.1.24.1.7 |
nvSFRMRRxoffRXOFFro INTEGER .1.3.6.1.4.1.230.5.1.24.1.8 |
nvSFRMRTxoffTXOFFro INTEGER .1.3.6.1.4.1.230.5.1.24.1.9 |
nvSFRMRNrxoffRNRXOFFro INTEGER .1.3.6.1.4.1.230.5.1.24.1.10 |
nvSFRMRNtxoffRNTXOFFro INTEGER .1.3.6.1.4.1.230.5.1.24.1.11 |
nvSFRMRLostfrmsNumber of lost frames.ro Counter .1.3.6.1.4.1.230.5.1.24.1.12 |
nvSFRMRFerrsFERRSro INTEGER .1.3.6.1.4.1.230.5.1.24.1.13 |
nvSFRMRPerrsPERRSro INTEGER .1.3.6.1.4.1.230.5.1.24.1.14 |
nvSFRMRRxovrsNumber of receive overruns frames.ro Counter .1.3.6.1.4.1.230.5.1.24.1.15 |
nvSFRMRCrcerrsNumber of CRC errors.ro Counter .1.3.6.1.4.1.230.5.1.24.1.16 |
nvSFRMRRxabortsNumber of receive aborte frames.ro Counter .1.3.6.1.4.1.230.5.1.24.1.17 |
nvSFRMRDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.1.24.1.18 |
nvSlotstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.25 |
nvSlotstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.25.1 |
nvSlotstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.25.2 |
nvSlotstatTableSlot statistics table definition. SEQUENCE OF NvSlotstatEntry .1.3.6.1.4.1.230.5.1.25.3 |
nvSlotstatEntryNevada product is a 17 slot chassis. Each slot can be
plugged in a communication card module. The module can
be a Host Packet, Framer or DLI card module. The system
can have only one Host Module and up to two Framer card
module. This table contains statistics information for
each slot. NvSlotstatEntry .1.3.6.1.4.1.230.5.1.25.3.1 |
nvSlotstatIndexSlot index number.ro INTEGER .1.3.6.1.4.1.230.5.1.25.3.1.1 |
nvSlotstatNameSlot name.ro DisplayString .1.3.6.1.4.1.230.5.1.25.3.1.2 |
nvSlotstatCardTypeSlot card type.ro Enumeration .1.3.6.1.4.1.230.5.1.25.3.1.3 |
nvSlotstatIotypeSlot IO type.ro Enumeration .1.3.6.1.4.1.230.5.1.25.3.1.4 |
nvSlotstatCpuSlot IO type.ro Enumeration .1.3.6.1.4.1.230.5.1.25.3.1.5 |
nvSlotstatRamAmount of RAM on card.ro DisplayString .1.3.6.1.4.1.230.5.1.25.3.1.6 |
nvSlotstatStatusStatus of card as given by bats.
good(1),
failure(2),
notPowered(3),
notapplicable(4)ro Enumeration .1.3.6.1.4.1.230.5.1.25.3.1.7 |
nvSlotstatCardidCard id from eeprom.ro DisplayString .1.3.6.1.4.1.230.5.1.25.3.1.8 |
nvSlotstatHwRevisionHardware Revision of the board.ro DisplayString .1.3.6.1.4.1.230.5.1.25.3.1.9 |
nvSlotstatCatPartnumCatalog part number.ro DisplayString .1.3.6.1.4.1.230.5.1.25.3.1.10 |
nvSlotstatSrNumberSerial Number.ro DisplayString .1.3.6.1.4.1.230.5.1.25.3.1.11 |
nvSlotstatProdChkDateProduction Check Date.ro DisplayString .1.3.6.1.4.1.230.5.1.25.3.1.12 |
nvCDSPTableDSP configuration table definition.The actual database
contains 17 tables, if a DSP card is plugged in
one of the slot then the data table matched the
slot will become active, otherwise the record is
not active. This table combines 17 tables into one
MIB table which uses two table instances: slot
and port. SEQUENCE OF NvCDSPEntry .1.3.6.1.4.1.230.5.1.26 |
nvCDSPEntryDLI configuration record. NvCDSPEntry .1.3.6.1.4.1.230.5.1.26.1 |
nvCDSPSlotIndexCDSP slot number.ro INTEGER .1.3.6.1.4.1.230.5.1.26.1.1 |
nvCDSPPortIndexCDSP port number.ro INTEGER .1.3.6.1.4.1.230.5.1.26.1.2 |
nvCDSPNameCDSP port name.ro DisplayString .1.3.6.1.4.1.230.5.1.26.1.3 |
nvCDSPEnableCDSP port enable control.rw Enumeration .1.3.6.1.4.1.230.5.1.26.1.8 |
nvCDSPNumfaiconCDSP num of consecutive hand shakes failed.rw INTEGER .1.3.6.1.4.1.230.5.1.26.1.9 |
nvCDSPNumloadCDSP num of times redownload failed.rw INTEGER .1.3.6.1.4.1.230.5.1.26.1.10 |
nvSDSPTableDSP statistics table definition.The actual database
contains 17 tables, if a DSP card is plugged in
one of the slot then the data table matched the
slot will become active, otherwise the record is
not active. This table combines 17 tables into one
MIB table which uses two table instances: slot
and port. SEQUENCE OF NvSDSPEntry .1.3.6.1.4.1.230.5.1.27 |
nvSDSPEntryDLI configuration record. NvSDSPEntry .1.3.6.1.4.1.230.5.1.27.1 |
nvSDSPSlotIndexSDSP slot number.ro INTEGER .1.3.6.1.4.1.230.5.1.27.1.1 |
nvSDSPPortIndexSDSP port number.ro INTEGER .1.3.6.1.4.1.230.5.1.27.1.2 |
nvSDSPNameSDSP port name.ro DisplayString .1.3.6.1.4.1.230.5.1.27.1.3 |
nvSDSPStateCDSP port state.ro Enumeration .1.3.6.1.4.1.230.5.1.27.1.4 |
nvSDSPNumfaiconnumber of consecutive handshake failures.ro INTEGER .1.3.6.1.4.1.230.5.1.27.1.5 |
nvSDSPNumloadnumber of redownload attempts failed.ro INTEGER .1.3.6.1.4.1.230.5.1.27.1.6 |
nvSDSPFailcausSDSP port state.ro Enumeration .1.3.6.1.4.1.230.5.1.27.1.7 |
nvSDSPNumcallsNumber of calls processed on this DSP.ro INTEGER --AF .1.3.6.1.4.1.230.5.1.27.1.8 |
nvSDSPNumfnegsNumber of calls faild prior to negotiation start.ro INTEGER --AF .1.3.6.1.4.1.230.5.1.27.1.9 |
nvSDSPDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.1.27.1.10 |
nvSDSPNumIncomTotal number of INcoming calls made to this DSP.ro Counter .1.3.6.1.4.1.230.5.1.27.1.11 |
nvSDSPNumOutgoTotal number of OUTgoing calls made to this DSP.ro Counter .1.3.6.1.4.1.230.5.1.27.1.12 |
nvSDSPNumIfailnegTotal number of failed negotiations INcoming.ro Counter .1.3.6.1.4.1.230.5.1.27.1.13 |
nvSDSPNumOfailnegTotal number of failed negotiations OUTgoing.ro Counter .1.3.6.1.4.1.230.5.1.27.1.14 |
nvSDSPEvent1DMOD- primary modem hs ended in abort condition.ro Counter .1.3.6.1.4.1.230.5.1.27.1.15 |
nvSDSPEvent2DMOD- primary modem hs ended in timeout condition.ro Counter .1.3.6.1.4.1.230.5.1.27.1.16 |
nvSDSPEvent3DMOD- Link layer modem hs ended in abort condition.ro Counter .1.3.6.1.4.1.230.5.1.27.1.17 |
nvSDSPEvent4DMOD- Link layer modem hs ende in timeout condition.ro Counter .1.3.6.1.4.1.230.5.1.27.1.18 |
nvSDSPEvent5DMOD- Link layer modem hs ended in primary hs aborted condition.ro Counter .1.3.6.1.4.1.230.5.1.27.1.19 |
nvSDSPEvent6DMOD- Command Response Timeout error.ro Counter .1.3.6.1.4.1.230.5.1.27.1.20 |
nvSDSPEvent7DMOD- Cleardown procedure ended in timeout condition.ro Counter .1.3.6.1.4.1.230.5.1.27.1.21 |
nvSDSPEvent8DMOD- Moniter Register timeout error.ro Counter .1.3.6.1.4.1.230.5.1.27.1.22 |
nvSDSPEvent9DMOD- Port Up failure
No SABM from DSP to start the session.ro Counter .1.3.6.1.4.1.230.5.1.27.1.23 |
nvSDSPEvent10DMOD- CHCRERR - with DSP Fail logic optioned.ro Counter .1.3.6.1.4.1.230.5.1.27.1.24 |
nvSDSPEvent11DMOD- CHCRERR - with DSP Fail logic not optioned.ro Counter .1.3.6.1.4.1.230.5.1.27.1.25 |
nvSDSPEvent12DMOD- modify action in SDSPx caused numfaicon
threshold to be reached.ro Counter .1.3.6.1.4.1.230.5.1.27.1.26 |
nvCroute OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.28 |
nvCrouteMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.28.1 |
nvCrouteNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.28.2 |
nvCrouteTableCircuit routing table. SEQUENCE OF NvCrouteEntry .1.3.6.1.4.1.230.5.1.28.3 |
nvCrouteEntryCircuit routing table record. NvCrouteEntry .1.3.6.1.4.1.230.5.1.28.3.1 |
nvCrouteIndexIndex of croute record.ro INTEGER .1.3.6.1.4.1.230.5.1.28.3.1.1 |
nvCrouteAddrAddress.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.230.5.1.28.3.1.10 |
nvCrouteRoutingrouting new var.rw Enumeration .1.3.6.1.4.1.230.5.1.28.3.1.11 |
nvCrouteTypecircuit type.rw Enumeration .1.3.6.1.4.1.230.5.1.28.3.1.13 |
nvCrouteVol1protProtocol Specified.rw Enumeration .1.3.6.1.4.1.230.5.1.28.3.1.15 |
nvCrouteVol1modeData mode.rw Enumeration .1.3.6.1.4.1.230.5.1.28.3.1.17 |
nvCrouteBwrw INTEGER .1.3.6.1.4.1.230.5.1.28.3.1.19 |
nvCrouteRcscp1rcscp1.rw DisplayString .1.3.6.1.4.1.230.5.1.28.3.1.22 |
nvCrouteRcscp2rcscp1.rw DisplayString .1.3.6.1.4.1.230.5.1.28.3.1.25 |
nvCrouteDialmapidRecord id of dialmap record to use.rw INTEGER .1.3.6.1.4.1.230.5.1.28.3.1.27 |
nvCrouteReserve1OBSOLETE - removed field.roobsolete DisplayString .1.3.6.1.4.1.230.5.1.28.3.1.28 |
nvCrouteDirectionDirection record is for.rw Enumeration .1.3.6.1.4.1.230.5.1.28.3.1.29 |
nvCrouteChoiceA priority value. Used to specify which record gets
precedence if two records have the same addr.rw Enumeration .1.3.6.1.4.1.230.5.1.28.3.1.30 |
nvCrouteStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.1.28.3.1.31 |
nvCrcstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.29 |
nvCrcstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.29.1 |
nvCrcstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.29.2 |
nvCrcstatTableCircuit connection status table. SEQUENCE OF NvCrcstatEntry .1.3.6.1.4.1.230.5.1.29.3 |
nvCrcstatEntrycrcstat record indexed by record number. NvCrcstatEntry .1.3.6.1.4.1.230.5.1.29.3.1 |
nvCrcstatIndexIndex of crcstat record.ro INTEGER .1.3.6.1.4.1.230.5.1.29.3.1.1 |
nvCrcstatCidcircuit connection identifier.ro INTEGER .1.3.6.1.4.1.230.5.1.29.3.1.2 |
nvCrcstatStatecircuit connection state.ro Enumeration .1.3.6.1.4.1.230.5.1.29.3.1.3 |
nvCrcstatCallednumcalled party address.ro DisplayString .1.3.6.1.4.1.230.5.1.29.3.1.4 |
nvCrcstatBwbandwidth of permanent circuit.ro INTEGER .1.3.6.1.4.1.230.5.1.29.3.1.5 |
nvCrcstatRcsc0resource info 0.ro DisplayString .1.3.6.1.4.1.230.5.1.29.3.1.6 |
nvCrcstatDevice0device info 0.ro DisplayString .1.3.6.1.4.1.230.5.1.29.3.1.7 |
nvCrcstatRcsc1resource info 1.ro DisplayString .1.3.6.1.4.1.230.5.1.29.3.1.8 |
nvCrcstatDevice1device info 1.ro DisplayString .1.3.6.1.4.1.230.5.1.29.3.1.9 |
nvCrcstatRcsc2resource info 2.ro DisplayString .1.3.6.1.4.1.230.5.1.29.3.1.10 |
nvCrcstatDevice2device info 2.ro DisplayString .1.3.6.1.4.1.230.5.1.29.3.1.11 |
nvCrcstatReserve1OBSOLETE - removed field.roobsolete DisplayString .1.3.6.1.4.1.230.5.1.29.3.1.12 |
nvCrcstatReserve2OBSOLETE - removed field.roobsolete DisplayString .1.3.6.1.4.1.230.5.1.29.3.1.13 |
nvCrcstatCallngnumcalling party address.ro DisplayString .1.3.6.1.4.1.230.5.1.29.3.1.14 |
nvCrcstatCalledsubcalled party subaddress.ro DisplayString .1.3.6.1.4.1.230.5.1.29.3.1.15 |
nvCrcstatCallngsubcalling party subaddress.ro DisplayString .1.3.6.1.4.1.230.5.1.29.3.1.16 |
nvCrcstatL1protL1prot.ro Enumeration .1.3.6.1.4.1.230.5.1.29.3.1.17 |
nvCrcstatL1modeLayer 1 data mode.ro Enumeration .1.3.6.1.4.1.230.5.1.29.3.1.18 |
nvCrcstatCrouteCroute record id used.ro INTEGER --AF .1.3.6.1.4.1.230.5.1.29.3.1.19 |
nvCrcstatRoutingRouting method.ro Enumeration .1.3.6.1.4.1.230.5.1.29.3.1.20 |
nvCrcstatDirectionDirection call was in.ro Enumeration .1.3.6.1.4.1.230.5.1.29.3.1.21 |
nvCrfstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.30 |
nvCrfstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.30.1 |
nvCrfstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.30.2 |
nvCrfstatTableCircuit failure status table. SEQUENCE OF NvCrfstatEntry .1.3.6.1.4.1.230.5.1.30.3 |
nvCrfstatEntrycrfstat record indexed by record number. NvCrfstatEntry .1.3.6.1.4.1.230.5.1.30.3.1 |
nvCrfstatIndexIndex of crfstat record.ro INTEGER .1.3.6.1.4.1.230.5.1.30.3.1.1 |
nvCrfstatCidcircuit connection identifier.ro INTEGER .1.3.6.1.4.1.230.5.1.30.3.1.2 |
nvCrfstatCallednumcalled party address.ro DisplayString .1.3.6.1.4.1.230.5.1.30.3.1.3 |
nvCrfstatCallngnumcalling party address.ro DisplayString .1.3.6.1.4.1.230.5.1.30.3.1.4 |
nvCrfstatCalledsubcalled party subaddress.ro DisplayString .1.3.6.1.4.1.230.5.1.30.3.1.5 |
nvCrfstatCallngsubcalling party subaddress.ro DisplayString .1.3.6.1.4.1.230.5.1.30.3.1.6 |
nvCrfstatL1protL1prot.ro Enumeration .1.3.6.1.4.1.230.5.1.30.3.1.7 |
nvCrfstatL1modeLayer 1 data mode.ro Enumeration .1.3.6.1.4.1.230.5.1.30.3.1.8 |
nvCrfstatCrouteCroute record id used.ro INTEGER --AF .1.3.6.1.4.1.230.5.1.30.3.1.9 |
nvCrfstatRoutingRouting method.ro Enumeration .1.3.6.1.4.1.230.5.1.30.3.1.10 |
nvCrfstatAddraddress.ro DisplayString .1.3.6.1.4.1.230.5.1.30.3.1.11 |
nvCrfstatCausecircuit connection failure cause.ro Enumeration .1.3.6.1.4.1.230.5.1.30.3.1.12 |
nvCrfstatRcsc0resource info 0.ro DisplayString .1.3.6.1.4.1.230.5.1.30.3.1.13 |
nvCrfstatRcsc1resource info 1.ro DisplayString .1.3.6.1.4.1.230.5.1.30.3.1.14 |
nvCrfstatRcsc2resource info 2.ro DisplayString .1.3.6.1.4.1.230.5.1.30.3.1.15 |
nvCrfstatReserve1OBSOLETE - removed field.roobsolete DisplayString .1.3.6.1.4.1.230.5.1.30.3.1.16 |
nvCrfstatDirectionDirection record is for.ro Enumeration .1.3.6.1.4.1.230.5.1.30.3.1.18 |
nvRrstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.31 |
nvRrstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.31.1 |
nvRrstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.31.2 |
nvRrstatTableresouce registry (system registry) status table. SEQUENCE OF NvRrstatEntry .1.3.6.1.4.1.230.5.1.31.3 |
nvRrstatEntryrrstat record indexed by record number. NvRrstatEntry .1.3.6.1.4.1.230.5.1.31.3.1 |
nvRrstatIndexIndex of rrstat record.ro INTEGER .1.3.6.1.4.1.230.5.1.31.3.1.1 |
nvRrstatPoolnameresource pool name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.230.5.1.31.3.1.2 |
nvRrstatClassresource pool class.ro Enumeration .1.3.6.1.4.1.230.5.1.31.3.1.3 |
nvRrstatNumbersnumber of resources.ro Counter .1.3.6.1.4.1.230.5.1.31.3.1.4 |
nvRrstatConnsnumber of connected resources.ro Counter .1.3.6.1.4.1.230.5.1.31.3.1.5 |
nvRrstatMaxcallsMaximum number of connected resources.ro Counter .1.3.6.1.4.1.230.5.1.31.3.1.6 |
nvRrstatNumIcallsTotal number of incoming calls processed.ro Counter .1.3.6.1.4.1.230.5.1.31.3.1.7 |
nvRrstatNumOcallsTotal number of outgoing calls processed.ro Counter .1.3.6.1.4.1.230.5.1.31.3.1.8 |
nvRrstatNumcallsTotal number of calls processed.ro Counter .1.3.6.1.4.1.230.5.1.31.3.1.9 |
nvRrstatAvgtimeAverage length of call in seconds.ro Counter .1.3.6.1.4.1.230.5.1.31.3.1.10 |
nvRrstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.1.31.3.1.15 |
nvModemprof OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.32 |
nvModemprofMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.32.1 |
nvModemprofNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.32.2 |
nvModemprofTablemodemconf file. SEQUENCE OF NvModemprofEntry .1.3.6.1.4.1.230.5.1.32.3 |
nvModemprofEntrymodemconf record. NvModemprofEntry .1.3.6.1.4.1.230.5.1.32.3.1 |
nvModemprofIndexIndex of modemconf recordro INTEGER .1.3.6.1.4.1.230.5.1.32.3.1.1 |
nvModemprofNameModem Prof resource config name (name)rw DisplayString .1.3.6.1.4.1.230.5.1.32.3.1.2 |
nvModemprofRsrcpoolResource pool name.rw DisplayString .1.3.6.1.4.1.230.5.1.32.3.1.5 |
nvModemprofDspnameDevice usage group name.rw DisplayString .1.3.6.1.4.1.230.5.1.32.3.1.6 |
nvModemprofTypeModem modulation scheme (type)
Default value is 3.rw Enumeration .1.3.6.1.4.1.230.5.1.32.3.1.7 |
nvModemprofEcModem error correction option.rw Enumeration .1.3.6.1.4.1.230.5.1.32.3.1.8 |
nvModemprofDcModem data compression option.rw Enumeration .1.3.6.1.4.1.230.5.1.32.3.1.9 |
nvModemprofModeModem sync / async option.rw Enumeration .1.3.6.1.4.1.230.5.1.32.3.1.10 |
nvModemprofCmpdtypeModem companding type.rw Enumeration .1.3.6.1.4.1.230.5.1.32.3.1.13 |
nvModemprofTxlvlTransmit level (txlvl)
Default value is 13.rw INTEGER .1.3.6.1.4.1.230.5.1.32.3.1.14 |
nvModemprofRxthreshModem receive threshold (rxthresh)
Default value is 38.rw INTEGER .1.3.6.1.4.1.230.5.1.32.3.1.15 |
nvModemprofAnstonModem generate answer (anston)
tone.rw Enumeration .1.3.6.1.4.1.230.5.1.32.3.1.17 |
nvModemprofAnstondurMode answer tone (anstondur)
duration.rw INTEGER .1.3.6.1.4.1.230.5.1.32.3.1.18 |
nvModemprofBildlyModem wait to send answer (bildly)
tone.rw INTEGER .1.3.6.1.4.1.230.5.1.32.3.1.19 |
nvModemprofStatusOperation status. Add the record to the table (valid) or delete
the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.1.32.3.1.20 |
nvModemprofFalbckchrmodem autorel fallback char.rw INTEGER .1.3.6.1.4.1.230.5.1.32.3.1.21 |
nvIfStackInfo OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.33 |
nvIfStackInfoNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.33.1 |
nvIfStackInfoTablemodemconf file. SEQUENCE OF NvIfStackInfoEntry .1.3.6.1.4.1.230.5.1.33.2 |
nvIfStackInfoEntryIfStackInfo record. NvIfStackInfoEntry .1.3.6.1.4.1.230.5.1.33.2.1 |
nvIfStackInfoHigherLIhighre layer interface number.ro INTEGER .1.3.6.1.4.1.230.5.1.33.2.1.1 |
nvIfStackInfoLowerLILower layer interface number.ro INTEGER .1.3.6.1.4.1.230.5.1.33.2.1.2 |
nvIfStackInfoStatusStatus of the entry.ro INTEGER .1.3.6.1.4.1.230.5.1.33.2.1.3 |
nvIfStackInfoRidRecord ID to get info on thisro INTEGER .1.3.6.1.4.1.230.5.1.33.2.1.4 |
nvDialmap OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.34 |
nvDialmapMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.34.1 |
nvDialmapNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.34.2 |
nvDialmapTableDialmap table. SEQUENCE OF NvDialmapEntry .1.3.6.1.4.1.230.5.1.34.3 |
nvDialmapEntryDialmap table record. NvDialmapEntry .1.3.6.1.4.1.230.5.1.34.3.1 |
nvDialmapIndexIndex of dialmap record.ro INTEGER .1.3.6.1.4.1.230.5.1.34.3.1.1 |
nvDialmapNumdeleteNumber of digits to delete.rw INTEGER .1.3.6.1.4.1.230.5.1.34.3.1.2 |
nvDialmapAddprefixDigits to add after digits deleted.rw DisplayString .1.3.6.1.4.1.230.5.1.34.3.1.3 |
nvDialmapStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.1.34.3.1.10 |
nvDspmalloc OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.35 |
nvDspmallocMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.35.1 |
nvDspmallocNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.35.2 |
nvDspmallocTableDspmalloc table. SEQUENCE OF NvDspmallocEntry .1.3.6.1.4.1.230.5.1.35.3 |
nvDspmallocEntryDspmalloc table record. NvDspmallocEntry .1.3.6.1.4.1.230.5.1.35.3.1 |
nvDspmallocIndexIndex of dspmalloc recordro INTEGER .1.3.6.1.4.1.230.5.1.35.3.1.1 |
nvDspmallocDsptypeType of DSP - kflex or V.90.ro Enumeration .1.3.6.1.4.1.230.5.1.35.3.1.2 |
nvDspmallocWeightAllocation proportion.rw INTEGER .1.3.6.1.4.1.230.5.1.35.3.1.3 |
nvDspmallocStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.1.35.3.1.10 |
nvDialstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.1.36 |
nvDialstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.1.36.1 |
nvDialstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.1.36.2 |
nvDialstatTableDialstat table. SEQUENCE OF NvDialstatEntry .1.3.6.1.4.1.230.5.1.36.3 |
nvDialstatEntryDialstat table record. NvDialstatEntry .1.3.6.1.4.1.230.5.1.36.3.1 |
nvDialstatIndexIndex of Dialstat recordro INTEGER .1.3.6.1.4.1.230.5.1.36.3.1.1 |
nvDialstatRcscpoolResource Name.ro DisplayString .1.3.6.1.4.1.230.5.1.36.3.1.2 |
nvDialstatNcurrentNumber of dial-out Sessions currently occuring.ro INTEGER .1.3.6.1.4.1.230.5.1.36.3.1.3 |
nvDialstatNcallingNumber of call attempts currently occuring.ro INTEGER .1.3.6.1.4.1.230.5.1.36.3.1.4 |
nvDialstatTraceIs trace enabled?ro Enumeration .1.3.6.1.4.1.230.5.1.36.3.1.5 |
nvDialstatLastAddrLast Called Number.ro DisplayString .1.3.6.1.4.1.230.5.1.36.3.1.6 |
nvDialstatLastCauseLast ISDN cause code.ro INTEGER .1.3.6.1.4.1.230.5.1.36.3.1.7 |
nvDialstatLastDiagLast X.25 diagnostic.ro INTEGER .1.3.6.1.4.1.230.5.1.36.3.1.8 |
nvDialstatLastResponseLast Response.ro DisplayString .1.3.6.1.4.1.230.5.1.36.3.1.9 |
nvDialstatNdialoutNumber of dial-out sessions.ro Counter .1.3.6.1.4.1.230.5.1.36.3.1.10 |
nvDialstatNattemptNumber of call attempts.
(May be multiple attempts per dialout request).ro Counter .1.3.6.1.4.1.230.5.1.36.3.1.11 |
nvDialstatNsucceedNumber of successful dial-out attempts.ro Counter .1.3.6.1.4.1.230.5.1.36.3.1.12 |
nvDialstatNfailNumber of failed dial-out attempts.ro Counter .1.3.6.1.4.1.230.5.1.36.3.1.13 |
nvDialstatNcircfailNumber of times circuit creation failed immediately.ro Counter .1.3.6.1.4.1.230.5.1.36.3.1.14 |
nvDialstatNcmderrorNumber of fails due to error in dialout string command.ro Counter .1.3.6.1.4.1.230.5.1.36.3.1.15 |
nvDialstatNdialtoneNumber of fails due to no dialtone.ro Counter .1.3.6.1.4.1.230.5.1.36.3.1.16 |
nvDialstatNbusyNumber of fails due to remote busy.ro Counter .1.3.6.1.4.1.230.5.1.36.3.1.17 |
nvDialstatNnoRouteNumber of fails due to routing error.ro Counter .1.3.6.1.4.1.230.5.1.36.3.1.18 |
nvDialstatNnoModemNumber of Fails because no modem was available.ro Counter .1.3.6.1.4.1.230.5.1.36.3.1.19 |
nvDialstatNnoInputNumber of fails because of no user input
within time limit.ro Counter .1.3.6.1.4.1.230.5.1.36.3.1.20 |
nvDialstatNinvnumNumber of fails because invalid user input received.ro Counter .1.3.6.1.4.1.230.5.1.36.3.1.21 |
nvDialstatNnoAnswerNumber of fails due to no answer.ro Counter .1.3.6.1.4.1.230.5.1.36.3.1.22 |
nvDialstatNmnegfailNumber of failed modem negotiation.ro Counter .1.3.6.1.4.1.230.5.1.36.3.1.23 |
nvDialstatNconnfailNumber of fails after ISDN connection for reasons
other than modem negotiation failure.ro Counter .1.3.6.1.4.1.230.5.1.36.3.1.24 |
nvDialstatNmiscfailNumber of miscellaneous failures not counted elsewhere.ro Counter .1.3.6.1.4.1.230.5.1.36.3.1.25 |
nvDialstatMaxcallMaximum number concurrently calling.ro Counter .1.3.6.1.4.1.230.5.1.36.3.1.26 |
nvDialstatAdSucctimAverage time for dial-out for successful dial-out request,
in units of tenths of a second.ro INTEGER .1.3.6.1.4.1.230.5.1.36.3.1.27 |
nvDialstatAdFailtimAverage time for dial-out for filaed cases,
in units of tenths of a second.ro INTEGER .1.3.6.1.4.1.230.5.1.36.3.1.28 |
nvDialstatNabredialnumber of aborted redials, JATE redial restriction.ro Counter .1.3.6.1.4.1.230.5.1.36.3.1.29 |
nvFrmrstatTableFramer card statistics table definition. The actual
framer card database has 17 tables. Each table uses name
convention: frmrstat plus slot number. This table will
combine 17 databases into one table. In order to support
the actual framer card configuration, this table requires
the slot number SEQUENCE OF NvFrmrstatEntry .1.3.6.1.4.1.230.5.1.37 |
nvFrmrstatEntryFramer card statistics record definition. The total
record number is 17. If there is a framer card plugged in
one of the slot, then the corresponding framer record is
active. Otherwise the record is not active. NvFrmrstatEntry .1.3.6.1.4.1.230.5.1.37.1 |
nvFrmrstatSlotIndexFramer card slot number.ro INTEGER .1.3.6.1.4.1.230.5.1.37.1.1 |
nvFrmrstatStateState of framer card.ro Enumeration .1.3.6.1.4.1.230.5.1.37.1.2 |
nvFrmrstatFailCauseReason for last failure.ro Enumeration .1.3.6.1.4.1.230.5.1.37.1.3 |
nvFrmrstatResetTimeDate and Time of last framer card reset.ro DisplayString .1.3.6.1.4.1.230.5.1.37.1.4 |
nvFrmrstatNumFailuresNumber of download attempts.ro INTEGER .1.3.6.1.4.1.230.5.1.37.1.5 |
nvFrmrstatNumReloadsNumber of successful reloads.ro INTEGER .1.3.6.1.4.1.230.5.1.37.1.6 |
nvFrmrstatTotalCallsnumber of smartport calls made.ro INTEGER .1.3.6.1.4.1.230.5.1.37.1.7 |
nvFrmrstatCallsPresentnumber of calls currently up.ro INTEGER .1.3.6.1.4.1.230.5.1.37.1.8 |
nvFrmrstatNumPortUpnumber of successful port ups.ro INTEGER .1.3.6.1.4.1.230.5.1.37.1.9 |
nvFrmrstatNumFailUpnumber of failed port ups.ro INTEGER .1.3.6.1.4.1.230.5.1.37.1.10 |
nvFrmrstatNumTxFramesnumber of frames transmitted.ro INTEGER .1.3.6.1.4.1.230.5.1.37.1.11 |
nvFrmrstatNumRxFramesnumber of frames received.ro INTEGER .1.3.6.1.4.1.230.5.1.37.1.12 |
nvFrmrstatNumTxBytesNumber of bytes transmitted.ro INTEGER .1.3.6.1.4.1.230.5.1.37.1.13 |
nvFrmrstatNumRxBytesnumber of bytes received.ro INTEGER .1.3.6.1.4.1.230.5.1.37.1.14 |
nevadaModels OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.2 |
nvNas OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.2.1 |
nvTrapDeviceConnectedProbable Cause
The port placed or accepted call with the attached device.
Probable Effect
Nevada has a network connection
Recommended Action
Network connection is now available for data transfer. TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.4352 |
nvTrapDeviceDisconnectedProbable Cause
The port disconnected with the attached device.
Probable Effect
Nevada does not have a network connection on the port.
Recommended Action
Refer stat files itipstat, iticstat, itiustat & portstat. TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.4353 |
nvTrapDuiportavailProbable Cause
number of available ports at site
Probable Effect
can place calls
Recommended Action
place calls TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.4354 |
nvTrapNoIdlePortsProbable Cause
All available ports are in use
Probable Effect
No additional users will be able to call in.
Recommended Action
Add more ports to the particular site. TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.4355 |
nvTrapDatatimerexpirdProbable Cause
Data mode timer expired
Probable Effect
Recommended Action TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.4359 |
nvTrapDUIDownProbable Cause
Both DUI Circuits down.
Probable Effect
Can not accept calls.
Recommended Action TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.4365 |
nvTrapDatabaseUpPrimaryLSERVER: Database Up: primary NUA `S0` TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.4377 |
nvTrapDatabaseUpSecondaryLSERVER: Database Up: secondary NUA `S0` TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.4378 |
nvTrapLinkNotReadyProbable Cause
X.25 detected that the link is down.
Probable Effect
Data transfer over the specified link not possible
Recommended Action
Correct the Physical connection and/or configuration TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.4668 |
nvTrapLinkReadyProbable Cause
X.25 detected that the link has come up.
Probable Effect
Data transfer over the specified link possible
Recommended Action
New calls can now be established on this link TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.4669 |
nvTrapAlternateConfigNevada running alternate config on side `n0` TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.5635 |
nvTrapDbautosavedata base auto save TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.5636 |
nvTrapDbCrcErrorNevada CRC error on database TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.5637 |
nvTrapDbsavecountsave count is zero TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.5638 |
nvTrapLocalDatabaseChangedNevada local database has been changed TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.5639 |
nvTrapRateIncreasedToL1Nevada statistics rate increased to level 1 TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.5640 |
nvTrapRateIncreasedToL2Nevada statistics rate increased to level 2 TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.5641 |
nvTrapRateDecreasedBelowL1Nevada statistics rate decrease to below level 1 TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.5642 |
nvTrapRateDecreasedBelowL2Nevada statistics rate decrease to below level 2 TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.5643 |
nvTrapReachedStatusNevada status value reached TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.5644 |
nvTrapLeftStatusNevada status value no longer met TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.5645 |
nvTrapFramerfailactionProbable Cause
framer failed to do the required action
Probable Effect
Recommended Action TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.5652 |
nvTrapFramerfailedProbable Cause
framer card in the indicated slot failed to do the requested action
Probable Effect
no traffic will flow
Recommended Action
check hardware and software configuration TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.5653 |
nvTrapFrPortUpNevada Frame Relay Interface up ready TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.11520 |
nvTrapFrPortDownNevada Frame Relay Interface down not-ready TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.11521 |
nvTrapFrLMIErrorProbable Cause
The specified frame relay interface has detected LMI error.
Probable Effect
Stops PVC traffic.
Recommended Action
Wait for LMI to enter normal state to resume PVC traffic. TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.11522 |
nvTrapFrLMINormalProbable Cause
The specified frame relay interface has found LMI in normal state.
Probable Effect
Enables PVC traffic to resume.
Recommended Action
The FRI is available for data transfer. TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.11523 |
nvTrapFrAllDLCIsUpProbable Cause
All DLCIs on the FRI are functional.
Probable Effect
All FRPVCs enter data transfer state.
Recommended Action
All FRPVCs are available for data transfer. TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.11524 |
nvTrapFrDLCIsDownProbable Cause
One or more DLCIs on the FRI not functional.
Probable Effect
Data transfer will stop on the FRPVC that has gone down.
Recommended Action
Refer stat files fristat, frvcstat and frstat. TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.11525 |
nvTrapElxUpProbable Cause
ELX has gone up.
Probable Effect
Data can be exchanged
Recommended Action
Pass data through TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.12032 |
nvTrapElxDownProbable Cause
ELX has gone down.
Probable Effect
Data can not be exchanged
Recommended Action
Correct configuration, cable connection or the hardware setup. TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.12033 |
nvTrapPppLcpUpProbable Cause
The Link Control Protocol (LCP) has gone up.
Probable Effect
The link is configured, tested and available for higher-level
protocols such as IPCP (Internet Protocol Control Protocol).
Recommended Action
The PPP link is now available for higher-level protocol such as IPCP. TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.14848 |
nvTrapPppLcpDownProbable Cause
The Link Control Protocol (LCP) has gone down.
Probable Effect
The link is not configured and is not available for higher-level
protocols such as IPCP (Internet Protocol Control Protocol).
Recommended Action
Refer PPP statfile pppstat. TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.14849 |
nvTrapPppIpcpOnLcpUpProbable Cause
The IP Control Protocol (IPCP) has gone up.
Probable Effect
The Network Layer Protocol is selected and datagrams can be
sent.
Recommended Action
The PPP link is now available for datagram traffic. TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.14850 |
nvPppIpcpOnLcpDownProbable Cause
The IP Control Protocol (IPCP) has gone down.
Probable Effect
The Network Layer Protocol is not selected and datagrams
can not be sent.
Recommended Action
Refer PPP statfile pppstat. TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.14851 |
nvTrapPriDataLayerUpProbable Cause
ISDN Data Layer Up PRI is functional on the DLI
Probable Effect
Data Channel responding.
Recommended Action
Unit is ready to receive ISDN calls TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.15136 |
nvTrapPriDataLayerDnProbable Cause
ISDN Data Layer Down PRI is Not functional on the DLI
Probable Effect
Data Channel not responding bchannel calls will fail
Recommended Action
Test the DLI and check associated Config in CDLI and PRICONF TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.15137 |
nvTrapPppLcpNetworkPhaseProbable Cause
The LCP protocol has entered the network phase on the PPP link
Probable Effect
Network layer protocols such as IPCP can now exchange packets on the link
Recommended Action
None TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.15500 |
nvTrapPppLcpNetworkdownProbable Cause
The LCP protocol is down on the network phase on the PPP link
Probable Effect
Network layer protocols such as IPCP can not exchange packets on the link
Recommended Action TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.15501 |
nvTrapPppMpLinkAddedProbable Cause
A PPP link has been added to a multilink bundle
Probable Effect
Greater bandwidth is available on the bundle
Recommended Action
None required. Informational only TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.15504 |
nvTrapPppMpLinkDroppedProbable Cause
A PPP link has been dropped from a multilink bundle
Probable Effect
The bandwidth for the bundle has been reduced. If this was the
last link in the bundle the bundle will be closed
Recommended Action
None required, informational only TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.15505 |
nvTrapISDNFailedCallsProbable Cause
Number of ISDN calls failure have reached the configured threshold
Probable Effect
ISDN failure
Recommended Action
check the ISDN IO cards/service provider/hardware TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.16640 |
nvTrapDSPMFailedModemThresh1Probable Cause
Number of Modem failures has reached the configured threshold one
Probable Effect
Modem failure results in failed calls
Recommended Action
check modem hardware/configuration TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.16896 |
nvTrapDSPMFailedModemThresh2Probable Cause
Number of Modem failures has reached the configured threshold two
Probable Effect
Modem failure results in failed calls
Recommended Action
check modem hardware/configuration TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.16897 |
nvTrapDSPMFailedModemThresh3Probable Cause
Number of Modem failures has reached the configured threshold three
Probable Effect
Modem failure results in failed calls
Recommended Action
check modem hardware/configuration TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.16898 |
nvTrapDSPRFailedProbable Cause
DSPR has failed.
Probable Effect
DSPR card has failed
Recommended Action
Replace the DSPR card TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.16899 |
nvTrapFRAMERFailedProbable Cause
FRAMER card failure
Probable Effect
FRAMER card failure
Recommended Action
replace the framer card TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.17664 |
nvTrapQDLIFailedProbable Cause
QDLI card has failed
Probable Effect
QDLI card has failed
Recommended Action
None required, informational only TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.17920 |
nvTrapRemovedCardProbable Cause
a card has been deleted in the indicated slot
Probable Effect
a card has been deleted
Recommended Action
None required, informational only TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.17940 |
nvTrapCardInsertedProbable Cause
a card has been inserted in the indicated slot
Probable Effect
a card has been inserted
Recommended Action
None required, informational only TRAP-TYPE .1.3.6.1.4.1.230.5.2.1.0.17950 |
nevadaFrameRelay OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.5 |
nvFrstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.5.1 |
nvFrstatCurtimeMinutes into current 15-minute cycle
Statistic is zeroed at startup time.ro Gauge .1.3.6.1.4.1.230.5.5.1.1 |
nvFrstatTxcurfpsCurrent snapshot of Tx Frames/Second
Statistic is zeroed at startup time.ro Gauge .1.3.6.1.4.1.230.5.5.1.2 |
nvFrstatTxavgfpsAverage Tx Frames/Second for 15-minute cycle
Statistic is zeroed at startup time.ro Gauge .1.3.6.1.4.1.230.5.5.1.3 |
nvFrstatRxcurfpsCurrent snapshot of Rx Frames/Second
Statistic is zeroed at startup time.ro Gauge .1.3.6.1.4.1.230.5.5.1.4 |
nvFrstatRxavgfpsAverage Rx Frames/Second for 15-minute cycle
Statistic is zeroed at startup time.ro Gauge .1.3.6.1.4.1.230.5.5.1.5 |
nvFrstatMtxcurfpsCurrent snapshot of mapped Tx Frames/Second
Statistic is zeroed at startup time.ro Gauge .1.3.6.1.4.1.230.5.5.1.6 |
nvFrstatMtxavgfpsAverage mapped Tx Frames/Second for 15-minute cycle
Statistic is zeroed at startup time.ro Gauge .1.3.6.1.4.1.230.5.5.1.7 |
nvFrstatMrxcurfpsCurrent snapshot of mapped Rx Frames/Second
Statistic is zeroed at startup time.ro Gauge .1.3.6.1.4.1.230.5.5.1.8 |
nvFrstatMrxavgfpsAverage mapped Rx Frames/Second for 15-minute cycle
Statistic is zeroed at startup time.ro Gauge .1.3.6.1.4.1.230.5.5.1.9 |
nvFrstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.5.1.10 |
nvFristat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.5.2 |
nvFristatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.5.2.1 |
nvFristatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.5.2.2 |
nvFristatTablefristat file. SEQUENCE OF NvFristatEntry .1.3.6.1.4.1.230.5.5.2.3 |
nvFristatEntryfristat record. NvFristatEntry .1.3.6.1.4.1.230.5.5.2.3.1 |
nvFristatIndexIndex of Fristat recordro INTEGER .1.3.6.1.4.1.230.5.5.2.3.1.1 |
nvFristatPortPhysical Portro DisplayString .1.3.6.1.4.1.230.5.5.2.3.1.2 |
nvFristatOperstateFRI Operational state
Initial status is 0+1.ro Enumeration .1.3.6.1.4.1.230.5.5.2.3.1.3 |
nvFristatLmistateLMI Operational state
Initial status is 0+1.ro Enumeration .1.3.6.1.4.1.230.5.5.2.3.1.4 |
nvFristatCurseqTransmitted LMI sequence numberro INTEGER .1.3.6.1.4.1.230.5.5.2.3.1.5 |
nvFristatRcvseqReceived LMI sequence numberro INTEGER .1.3.6.1.4.1.230.5.5.2.3.1.6 |
nvFristatErrorcountsLMI errors during recorded history
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.5.2.3.1.7 |
nvFristatRxexceszesToo Large Incoming Frames
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.5.2.3.1.8 |
nvFristatRxbaddlcisInvalid dlci Incoming Frames
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.5.2.3.1.9 |
nvFristatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.5.2.3.1.10 |
nvFrvcstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.5.3 |
nvFrvcstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.5.3.1 |
nvFrvcstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.5.3.2 |
nvFrvcstatTablefrvcstat file. SEQUENCE OF NvFrvcstatEntry .1.3.6.1.4.1.230.5.5.3.3 |
nvFrvcstatEntryfrvcstat record. NvFrvcstatEntry .1.3.6.1.4.1.230.5.5.3.3.1 |
nvFrvcstatIndexIndex of Frvcstatro INTEGER .1.3.6.1.4.1.230.5.5.3.3.1.1 |
nvFrvcstatServiceConnected Component IDro DisplayString .1.3.6.1.4.1.230.5.5.3.3.1.2 |
nvFrvcstatServiceidService Instance.ro DisplayString .1.3.6.1.4.1.230.5.5.3.3.1.3 |
nvFrvcstatFriFRI of this PVC (FRICONF recnum)ro INTEGER .1.3.6.1.4.1.230.5.5.3.3.1.4 |
nvFrvcstatDlciDLCI of this PVCro INTEGER .1.3.6.1.4.1.230.5.5.3.3.1.5 |
nvFrvcstatStatusPVC Operational State
Initial status is 0+1.ro Enumeration .1.3.6.1.4.1.230.5.5.3.3.1.6 |
nvFrvcstatTxcongstatusTransmit Congestion Status
Initial status is 0+1.ro Enumeration .1.3.6.1.4.1.230.5.5.3.3.1.7 |
nvFrvcstatRxbufdepletionReceive Buffer Depletion
Statistic is zeroed at startup time.ro Gauge .1.3.6.1.4.1.230.5.5.3.3.1.8 |
nvFrvcstatOutputrateOutput during last period (bytes)
Statistic is zeroed at startup time.ro Gauge .1.3.6.1.4.1.230.5.5.3.3.1.9 |
nvFrvcstatInputrateInput during last period (bytes)
Statistic is zeroed at startup time.ro Gauge .1.3.6.1.4.1.230.5.5.3.3.1.10 |
nvFrvcstatExcessdatasData over output limit
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.5.3.3.1.11 |
nvFrvcstatTxframesTransmitted Frame Counter
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.5.3.3.1.12 |
nvFrvcstatRxframesReceived Frame Counter
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.5.3.3.1.13 |
nvFrvcstatDrprxsReceived Frames Dropped
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.5.3.3.1.14 |
nvFrvcstatDrprxdesReceived DE Frames Dropped
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.5.3.3.1.15 |
nvFrvcstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.5.3.3.1.16 |
nvFriconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.5.4 |
nvFriconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.5.4.1 |
nvFriconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.5.4.2 |
nvFriconfTablefriconf file. SEQUENCE OF NvFriconfEntry .1.3.6.1.4.1.230.5.5.4.3 |
nvFriconfEntryfriconf record. NvFriconfEntry .1.3.6.1.4.1.230.5.5.4.3.1 |
nvFriconfIndexIndex of friconf recordro INTEGER .1.3.6.1.4.1.230.5.5.4.3.1.1 |
nvFriconfPortPhysical Port (port)rw DisplayString .1.3.6.1.4.1.230.5.5.4.3.1.2 |
nvFriconfRsrcpoolResource poolrw DisplayString .1.3.6.1.4.1.230.5.5.4.3.1.3 |
nvFriconfMaxfrmszMaximum Frame Size (maxfrmsz)
Default value is 140.rw INTEGER .1.3.6.1.4.1.230.5.5.4.3.1.6 |
nvFriconfLmitypeStyle of LMI operation (lmitype)
Default value is go4 (1+1).rw Enumeration .1.3.6.1.4.1.230.5.5.4.3.1.8 |
nvFriconfModeMode of FRI Operation (mode)
Default value is user (0+1).rw Enumeration .1.3.6.1.4.1.230.5.5.4.3.1.9 |
nvFriconfDlciLMI's DLCI (dlci)
Default value is 1023.rw INTEGER .1.3.6.1.4.1.230.5.5.4.3.1.11 |
nvFriconfnT1LMI Polling Interval (nT1)
Default value is 10.rw INTEGER .1.3.6.1.4.1.230.5.5.4.3.1.12 |
nvFriconfnT2Max Time Between Polls (nT2)
Default value is 15.rw INTEGER .1.3.6.1.4.1.230.5.5.4.3.1.13 |
nvFriconfnT3Max Polls per nN4 (nT3)
Default value is 20.rw INTEGER .1.3.6.1.4.1.230.5.5.4.3.1.14 |
nvFriconfnN1LMI Full Status Poll Frequency (nN1)
Default value is 6.rw INTEGER .1.3.6.1.4.1.230.5.5.4.3.1.19 |
nvFriconfnN2LMI Error Threshold (nN2)
Default value is 2.rw INTEGER .1.3.6.1.4.1.230.5.5.4.3.1.20 |
nvFriconfnN3LMI Error History Length (nN3)
Default value is 4.rw INTEGER .1.3.6.1.4.1.230.5.5.4.3.1.21 |
nvFriconfnN4Max Polls Within nT3 (nN4).
Default value is 5.ro INTEGER .1.3.6.1.4.1.230.5.5.4.3.1.22 |
nvFriconfnP1Max PVCs allowed FRI (nP1)
Default value is 1.rw INTEGER .1.3.6.1.4.1.230.5.5.4.3.1.23 |
nvFriconfStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.5.4.3.1.29 |
nvFrvcconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.5.5 |
nvFrvcconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.5.5.1 |
nvFrvcconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.5.5.2 |
nvFrvcconfTablefrvcconf file. SEQUENCE OF NvFrvcconfEntry .1.3.6.1.4.1.230.5.5.5.3 |
nvFrvcconfEntryfrvcconf record. NvFrvcconfEntry .1.3.6.1.4.1.230.5.5.5.3.1 |
nvFrvcconfIndexIndex of frvcconf recordro INTEGER .1.3.6.1.4.1.230.5.5.5.3.1.1 |
nvFrvcconfDlciDLCI of this PVC (dlci)rw INTEGER .1.3.6.1.4.1.230.5.5.5.3.1.2 |
nvFrvcconfFriFRI of this PVC (fri)rw INTEGER .1.3.6.1.4.1.230.5.5.5.3.1.6 |
nvFrvcconfMappedpvcRecnum of Mapped PVC (mappedpvc)rw INTEGER .1.3.6.1.4.1.230.5.5.5.3.1.8 |
nvFrvcconfEnableIs this PVC enabled? (enable)
Default value is yse (1+1).rw Enumeration .1.3.6.1.4.1.230.5.5.5.3.1.11 |
nvFrvcconfTRate Monitoring Period (t)rw INTEGER .1.3.6.1.4.1.230.5.5.5.3.1.12 |
nvFrvcconfBcCommitted Burst Size (bc)rw INTEGER .1.3.6.1.4.1.230.5.5.5.3.1.15 |
nvFrvcconfBeExcess Burst Size (be)rw INTEGER .1.3.6.1.4.1.230.5.5.5.3.1.16 |
nvFrvcconfNIncoming BECN Threshold (n)rw INTEGER .1.3.6.1.4.1.230.5.5.5.3.1.17 |
nvFrvcconfRxbufspacReceive Buffer Space (rxbufspac)
Default value is 1.rw INTEGER .1.3.6.1.4.1.230.5.5.5.3.1.20 |
nvFrvcconfRxcgthresRcv Congestion Thrshld (rxcgthres)rw INTEGER .1.3.6.1.4.1.230.5.5.5.3.1.21 |
nvFrvcconfRxcgclearRcv Cong. Clear Thrshld (rxcgclear).rw INTEGER .1.3.6.1.4.1.230.5.5.5.3.1.22 |
nvFrvcconfStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.5.5.3.1.27 |
nevadaIti OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.6 |
nvIticstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.6.1 |
nvIticstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.6.1.1 |
nvIticstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.6.1.2 |
nvIticstatTableiticstat file. SEQUENCE OF NvIticstatEntry .1.3.6.1.4.1.230.5.6.1.3 |
nvIticstatEntryiticstat record. NvIticstatEntry .1.3.6.1.4.1.230.5.6.1.3.1 |
nvIticstatIndexIndex of iticstat recordro INTEGER .1.3.6.1.4.1.230.5.6.1.3.1.1 |
nvIticstatClassnameName of class.
This field identifies which class the statistics in this record
pertain to.ro DisplayString .1.3.6.1.4.1.230.5.6.1.3.1.2 |
nvIticstatNnccsnumber of network connection commands.
Total number of network originated calls to this class.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.6.1.3.1.3 |
nvIticstatNnfailsnumber of network connection failures.
Total number of network connection commands that failed.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.6.1.3.1.4 |
nvIticstatNpassfailsnumber of password failures.
Total number of password failures for this class.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.6.1.3.1.5 |
nvIticstatCurcallsCurrent number of calls.ro Counter --AF .1.3.6.1.4.1.230.5.6.1.3.1.6 |
nvIticstatAvgtimeAverage number of seconds per call.ro Counter --AF .1.3.6.1.4.1.230.5.6.1.3.1.7 |
nvIticstatMaxcallsMaximum concurrent calls.ro Counter --AF .1.3.6.1.4.1.230.5.6.1.3.1.8 |
nvIticstatNumcallsTotal number of successful modem connctions.ro INTEGER .1.3.6.1.4.1.230.5.6.1.3.1.9 |
nvIticstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.6.1.3.1.10 |
nvIticstatTcallsTotal number of hostcalls.ro Counter .1.3.6.1.4.1.230.5.6.1.3.1.11 |
nvIticstatN300bd300 up to 1200 baud calls received.ro Counter .1.3.6.1.4.1.230.5.6.1.3.1.12 |
nvIticstatN1200bd1200 up to 2400 baud calls received.ro Counter .1.3.6.1.4.1.230.5.6.1.3.1.13 |
nvIticstatN2400bd2400 up to 9600 baud calls received.ro Counter .1.3.6.1.4.1.230.5.6.1.3.1.14 |
nvIticstatN9600bd9600 up to 14400 baud calls received.ro Counter .1.3.6.1.4.1.230.5.6.1.3.1.15 |
nvIticstatN14400bd14400 up to 28800 baud calls received.ro Counter .1.3.6.1.4.1.230.5.6.1.3.1.16 |
nvIticstatN28800bd28800 baud calls and above received.ro Counter .1.3.6.1.4.1.230.5.6.1.3.1.17 |
nvIticstatFailnegCalls disconnected during modem negotiation.ro Counter .1.3.6.1.4.1.230.5.6.1.3.1.18 |
nvIticstatTrmdscdatCalls disconnected by terminal during data transfer.ro Counter .1.3.6.1.4.1.230.5.6.1.3.1.19 |
nvIticstatLoscarsuCalls disconnected during setup phase.ro Counter .1.3.6.1.4.1.230.5.6.1.3.1.20 |
nvIticstatLoscarcipCalls disconnected during connection phase.ro Counter .1.3.6.1.4.1.230.5.6.1.3.1.21 |
nvIticstatLoscardatCalls disconnected during data transfer.ro Counter .1.3.6.1.4.1.230.5.6.1.3.1.22 |
nvIticstatTrmdscsuCalls disconnected by terminal during setup.ro Counter .1.3.6.1.4.1.230.5.6.1.3.1.23 |
nvIticstatTrmdsccipCalls disconnected by terminal during modem negotiation.ro Counter .1.3.6.1.4.1.230.5.6.1.3.1.24 |
nvIticstatNcurIncomNumber of Current Incoming Calls.ro Counter .1.3.6.1.4.1.230.5.6.1.3.1.25 |
nvIticstatNcurOutgoNumber of Current Outgoing Calls.ro Counter .1.3.6.1.4.1.230.5.6.1.3.1.26 |
nvIticstatMaxIncomMaximum number of Incoming Calls.ro Counter .1.3.6.1.4.1.230.5.6.1.3.1.27 |
nvIticstatMaxOutgoMaximum number of Outgoing Calls.ro Counter .1.3.6.1.4.1.230.5.6.1.3.1.28 |
nvIticstatNumIncomNumber of Successful Incoming Calls.ro Counter .1.3.6.1.4.1.230.5.6.1.3.1.29 |
nvIticstatNumOutgoNumber of Successful Outgoing Calls.ro Counter .1.3.6.1.4.1.230.5.6.1.3.1.30 |
nvIticstatNncrnumber of network connection commands.
Count of virtual circuits initiated from ITI port.ro Counter .1.3.6.1.4.1.230.5.6.1.3.1.31 |
nvItipstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.6.2 |
nvItipstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.6.2.1 |
nvItipstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.6.2.2 |
nvItipstatTableitipstat file. SEQUENCE OF NvItipstatEntry .1.3.6.1.4.1.230.5.6.2.3 |
nvItipstatEntryitipstat record. NvItipstatEntry .1.3.6.1.4.1.230.5.6.2.3.1 |
nvItipstatIndexIndex of itipstatro INTEGER .1.3.6.1.4.1.230.5.6.2.3.1.1 |
nvItipstatPortnameName of port.
This field identifies which port the statistics in this record pertain
to.ro DisplayString .1.3.6.1.4.1.230.5.6.2.3.1.2 |
nvItipstatReserve1OBSOLETE - removed field.roobsolete DisplayString .1.3.6.1.4.1.230.5.6.2.3.1.3 |
nvItipstatAcctaccounting id.ro DisplayString .1.3.6.1.4.1.230.5.6.2.3.1.4 |
nvItipstatClassnameiti class: Current user class using this port.
NOTE: Order of the following fields corresponds to subset of NSCC structure.
The code uses block copies for these fields and assumes the above
condition is always true.ro DisplayString .1.3.6.1.4.1.230.5.6.2.3.1.5 |
nvItipstatSrcadrsource address: Source network address.ro DisplayString .1.3.6.1.4.1.230.5.6.2.3.1.6 |
nvItipstatDstadrdestination address: Destination network address.ro DisplayString .1.3.6.1.4.1.230.5.6.2.3.1.7 |
nvItipstatTxPszepacket size: Transmit Packet size used.ro Enumeration .1.3.6.1.4.1.230.5.6.2.3.1.8 |
nvItipstatRxPszepacket size: Receive Packet size used.ro Enumeration .1.3.6.1.4.1.230.5.6.2.3.1.9 |
nvItipstatTxWszewindow size: transmit Window size used.ro INTEGER .1.3.6.1.4.1.230.5.6.2.3.1.10 |
nvItipstatRxWszewindow size: receive Window size used.ro INTEGER .1.3.6.1.4.1.230.5.6.2.3.1.11 |
nvItipstatTxTputthroughput class: transmit Throughput class used.ro Enumeration .1.3.6.1.4.1.230.5.6.2.3.1.12 |
nvItipstatRxTputthroughput class: receive Throughput class used.ro Enumeration .1.3.6.1.4.1.230.5.6.2.3.1.13 |
nvItipstatCugtypecug type: Type of closed user group call.ro Enumeration .1.3.6.1.4.1.230.5.6.2.3.1.14 |
nvItipstatCugcug: Closed group identifier. Valid only if previous flag is true.ro INTEGER .1.3.6.1.4.1.230.5.6.2.3.1.15 |
nvItipstatRpoarpoa: DNICro INTEGER .1.3.6.1.4.1.230.5.6.2.3.1.16 |
nvItipstatRevfreverse charging: Flag indicating if reverse charging is being used.ro Enumeration .1.3.6.1.4.1.230.5.6.2.3.1.17 |
nvItipstatPriopriority call: Flag indicating if priority calling is beng used.ro Enumeration .1.3.6.1.4.1.230.5.6.2.3.1.18 |
nvItipstatFastfast select: Type of fast select.ro Enumeration .1.3.6.1.4.1.230.5.6.2.3.1.19 |
nvItipstatPvcpvc code: Permanent Virtual Circuit Code.ro INTEGER .1.3.6.1.4.1.230.5.6.2.3.1.20 |
nvItipstatNdcodenetwork disconnect code.
Value of the last network disconnnect code.ro INTEGER .1.3.6.1.4.1.230.5.6.2.3.1.21 |
nvItipstatNddiagnetwork diag code: Value of the last network diagnostic code.ro INTEGER .1.3.6.1.4.1.230.5.6.2.3.1.22 |
nvItipstatNdorigindisconnect origin: Whether disconnect was local or remote directive.ro INTEGER .1.3.6.1.4.1.230.5.6.2.3.1.23 |
nvItipstatNrcodenetwork reset code: Value of the last network reset code.ro INTEGER .1.3.6.1.4.1.230.5.6.2.3.1.24 |
nvItipstatNrdiagnetwork reset diag: Value of the last network reset diagnostic code.ro INTEGER .1.3.6.1.4.1.230.5.6.2.3.1.25 |
nvItipstatOrgcall originator.
Flag indicating who originated the call in progress.ro Enumeration .1.3.6.1.4.1.230.5.6.2.3.1.26 |
nvItipstatStateiti internal state: Internal state of the ITI interface.ro Enumeration .1.3.6.1.4.1.230.5.6.2.3.1.27 |
nvItipstatUserdatauser data: User specified user data.ro DisplayString .1.3.6.1.4.1.230.5.6.2.3.1.28 |
nvItipstatUsernameiti class: Current user using this port.ro DisplayString .1.3.6.1.4.1.230.5.6.2.3.1.29 |
nvItipstatX28typecommand standard.ro Enumeration .1.3.6.1.4.1.230.5.6.2.3.1.30 |
nvItipstatX3typeparameter standard: Current X.3 parameter standard being used.ro Enumeration .1.3.6.1.4.1.230.5.6.2.3.1.31 |
nvItipstatReservetOBSOLETE - removed field.ro DisplayString .1.3.6.1.4.1.230.5.6.2.3.1.32 |
nvItipstatNtccsnumber of term connection commands.
Count of service requests received from the terminal.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.6.2.3.1.33 |
nvItipstatNnccsnumber of network connection cmds.
Count of service requests received from the network.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.6.2.3.1.34 |
nvItipstatNnfailsnumber of network connection fails.
Count of network call failures.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.6.2.3.1.35 |
nvItipstatNtxpaksnumber of transmitted packets (to network).
Number of packets sent on the network.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.6.2.3.1.36 |
nvItipstatNrxpaksnumber of received packets (from network).
Number of packets received from the network.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.6.2.3.1.37 |
nvItipstatNtxresetsnumber of transmitted resets.
Number of resets originated.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.6.2.3.1.38 |
nvItipstatNrxresetsnumber of received resets.
Number of resets received from network.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.6.2.3.1.39 |
nvItipstatNctxpaksnumber of current transmitted packets (to network).
Number of packets send over the network during current terminal
session. Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.6.2.3.1.40 |
nvItipstatNcrxpaksnumber of current received packets (from network).
Number of packets received from the network during current terminal
session.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.6.2.3.1.41 |
nvItipstatNctxresetsnumber of current transmitted resets.
Number of resets originated during current terminal session.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.6.2.3.1.42 |
nvItipstatNcrxresetsnumber of current received resets.
Number of resets received during current terminal session.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.6.2.3.1.43 |
nvItipstatNinputsnumber of input characters.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.6.2.3.1.44 |
nvItipstatNoutputsnumber of output characters.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.6.2.3.1.45 |
nvItipstatParamCopy of the current settings of the X.3 parameters (EX standard)
for this port. This byte array must contain at least P_MAX + 1 bytes.ro DisplayString .1.3.6.1.4.1.230.5.6.2.3.1.46 |
nvItipstatPreparamCopy of X.3 parameters that were in effect before the current
call (if any) was made. These values are restored (back to param)
after the call is cleared.ro DisplayString .1.3.6.1.4.1.230.5.6.2.3.1.47 |
nvItipstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.6.2.3.1.48 |
nvItipstatIdAddress of ITI control block.ro DisplayString .1.3.6.1.4.1.230.5.6.2.3.1.49 |
nvItipstatNtconnNumber of terminal connections.
Number of times modem successfully trained.ro Counter .1.3.6.1.4.1.230.5.6.2.3.1.50 |
nvItipstatNtdcNumber of terminal disconnect commands.
Number of time terminal disconnected.ro Counter .1.3.6.1.4.1.230.5.6.2.3.1.51 |
nvItipstatNncrNumber of network connection responses.
Count of virtual circuits initiated from ITI port.ro Counter .1.3.6.1.4.1.230.5.6.2.3.1.52 |
nvItipstatNtimeoutNumber of disconnects caused by ITI timeout.ro Counter .1.3.6.1.4.1.230.5.6.2.3.1.53 |
nvItiustat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.6.5 |
nvItiustatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.6.5.1 |
nvItiustatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.6.5.2 |
nvItiustatTableitiustat file. SEQUENCE OF NvItiustatEntry .1.3.6.1.4.1.230.5.6.5.3 |
nvItiustatEntryitiustat record. NvItiustatEntry .1.3.6.1.4.1.230.5.6.5.3.1 |
nvItiustatIndexIndex of itiustat recordro INTEGER .1.3.6.1.4.1.230.5.6.5.3.1.1 |
nvItiustatUsernameName of user.
This field identifies which user the statistics in this record pertain
to.ro DisplayString .1.3.6.1.4.1.230.5.6.5.3.1.2 |
nvItiustatNcallsnumber of calls made.
Total number of calls initiated by user
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.6.5.3.1.3 |
nvItiustatNpassfailsnumber of password failures.
Total number of password failures.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.6.5.3.1.4 |
nvItiustatNcallbacksnumber of callbacks.
Total number of callbacks to this user.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.6.5.3.1.5 |
nvItiustatDurationlength of time used by user.
Total number of minutes of time (*100*60).
Statistic is zeroed at startup time.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.230.5.6.5.3.1.6 |
nvItiustatNtxpaksnumber of transmitted packets (to network).
Total number packets sent by this user over the network.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.6.5.3.1.7 |
nvItiustatNrxpaksnumber of received packets (from network).
Total number packets received by this user over the network.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.6.5.3.1.8 |
nvItiustatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.6.5.3.1.9 |
nvDlspcstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.6.6 |
nvDlspcstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.6.6.1 |
nvDlspcstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.6.6.2 |
nvDlspcstatTabledlspcstat file. SEQUENCE OF NvDlspcstatEntry .1.3.6.1.4.1.230.5.6.6.3 |
nvDlspcstatEntrydlspcstat record. NvDlspcstatEntry .1.3.6.1.4.1.230.5.6.6.3.1 |
nvDlspcstatIndexNumber of dial records.ro INTEGER .1.3.6.1.4.1.230.5.6.6.3.1.1 |
nvDlspcstatNportsNumber of dial ports.ro INTEGER .1.3.6.1.4.1.230.5.6.6.3.1.2 |
nvDlspcstatNidleNumber of idle dial ports.ro INTEGER .1.3.6.1.4.1.230.5.6.6.3.1.3 |
nvDuistat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.6.7 |
nvDuistatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.6.7.1 |
nvDuistatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.6.7.2 |
nvDuistatTableduistat file statistics. SEQUENCE OF NvDuistatEntry .1.3.6.1.4.1.230.5.6.7.3 |
nvDuistatEntryDuistat record. NvDuistatEntry .1.3.6.1.4.1.230.5.6.7.3.1 |
nvDuistatIndexindexro INTEGER .1.3.6.1.4.1.230.5.6.7.3.1.1 |
nvDuistatTypeType of DUI Circuit.ro Enumeration .1.3.6.1.4.1.230.5.6.7.3.1.2 |
nvDuistatNuaLast address used.ro DisplayString .1.3.6.1.4.1.230.5.6.7.3.1.3 |
nvDuistatStateState of DUI Circuit.ro Enumeration .1.3.6.1.4.1.230.5.6.7.3.1.4 |
nvDuistatLinkLink carrying virual circuit.ro INTEGER .1.3.6.1.4.1.230.5.6.7.3.1.5 |
nvDuistatLcnLCN of virual circuit.ro INTEGER .1.3.6.1.4.1.230.5.6.7.3.1.6 |
nvDuistatLastcauseLast clear cause code.ro INTEGER .1.3.6.1.4.1.230.5.6.7.3.1.7 |
nvDuistatLastdiagLast clear diagnostic.ro INTEGER .1.3.6.1.4.1.230.5.6.7.3.1.8 |
nvDuistatNmnxtcallNumber of minutes until next call.ro INTEGER .1.3.6.1.4.1.230.5.6.7.3.1.9 |
nvDuistatNretriesNumber of retries.ro Counter .1.3.6.1.4.1.230.5.6.7.3.1.10 |
nvDuistatNrejectsNumber of rejects.ro Counter .1.3.6.1.4.1.230.5.6.7.3.1.11 |
nvDuistatNacceptsNumber of accepts.ro Counter .1.3.6.1.4.1.230.5.6.7.3.1.12 |
nvDuistatNinvmsgsNumber of invalid DUI messages received.ro Counter .1.3.6.1.4.1.230.5.6.7.3.1.13 |
nvDuistatNunxmsgsNumber of unexpected DUI messages received.ro Counter .1.3.6.1.4.1.230.5.6.7.3.1.14 |
nvDuistatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.6.7.3.1.15 |
nvDportstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.6.8 |
nvDportstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.6.8.1 |
nvDportstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.6.8.2 |
nvDportstatTableDportstat file statistics. SEQUENCE OF NvDportstatEntry .1.3.6.1.4.1.230.5.6.8.3 |
nvDportstatEntryDportstat record. NvDportstatEntry .1.3.6.1.4.1.230.5.6.8.3.1 |
nvDportstatIndexa. indexro INTEGER .1.3.6.1.4.1.230.5.6.8.3.1.1 |
nvDportstatPortnamePort namero DisplayString .1.3.6.1.4.1.230.5.6.8.3.1.2 |
nvDportstatSetstateState the port was last set toro Enumeration .1.3.6.1.4.1.230.5.6.8.3.1.3 |
nvDportstatIntfstatePhysical port statero Enumeration .1.3.6.1.4.1.230.5.6.8.3.1.4 |
nvDportstatChstateChannel statero Enumeration .1.3.6.1.4.1.230.5.6.8.3.1.5 |
nvDportstatDuihostType of DUI hostro Enumeration .1.3.6.1.4.1.230.5.6.8.3.1.6 |
nvDportstatDuistatusStatus of DUI portro Enumeration .1.3.6.1.4.1.230.5.6.8.3.1.7 |
nvDportstatPorttypeType of portro Enumeration .1.3.6.1.4.1.230.5.6.8.3.1.8 |
nvDportstatCliCalling line identifierro DisplayString .1.3.6.1.4.1.230.5.6.8.3.1.11 |
nvDportstatResetdateDate when statistics were last resetro DisplayString .1.3.6.1.4.1.230.5.6.8.3.1.12 |
nvDportstatUptimeNumber of minutes port activero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.230.5.6.8.3.1.13 |
nvDportstatDowntimeNumber of minutes port idlero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.230.5.6.8.3.1.14 |
nvDportstatSessionsNumber of sessionsro Counter .1.3.6.1.4.1.230.5.6.8.3.1.15 |
nvDportstatIncallsNumber of incoming callsro Counter .1.3.6.1.4.1.230.5.6.8.3.1.16 |
nvDportstatOutcallsNumber of outgoing callsro Counter .1.3.6.1.4.1.230.5.6.8.3.1.17 |
nvDportstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.6.8.3.1.18 |
nvIticlass OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.6.9 |
nvIticlassMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.6.9.1 |
nvIticlassNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.6.9.2 |
nvIticlassTableiticlass file. SEQUENCE OF NvIticlassEntry .1.3.6.1.4.1.230.5.6.9.3 |
nvIticlassEntryiticlass record. NvIticlassEntry .1.3.6.1.4.1.230.5.6.9.3.1 |
nvIticlassIndexIndex of iticlass recordro INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.1 |
nvIticlassClassnameClass Name (classname)
This field contains a user's name.
If a default user id is not specified in the PORT record,
ITI will ask the user to enter a User Name.
The entered value is matched against the records in this file.rw DisplayString .1.3.6.1.4.1.230.5.6.9.3.1.2 |
nvIticlassAcctsiglAccounting Service Signal (acctsigl)
Default value is 2+1.rw Enumeration .1.3.6.1.4.1.230.5.6.9.3.1.3 |
nvIticlassActonlossAction on Data Loss (actonloss)
Default value is 1+1.rw Enumeration .1.3.6.1.4.1.230.5.6.9.3.1.4 |
nvIticlassBanneridConnect Banner Identification (bannerid)
This parameter indicates the herald
message that is to be send to the port upon activation.
This value is an index into string storage.
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.5 |
nvIticlassBreaksgnlBREAK Character Signal Id (breaksgnl)rw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.6 |
nvIticlassCalmethodAllowed Calling Method (calmethod)
Parameter to control the restriction of outgoing call methods.
Default value is 1+1.rw Enumeration .1.3.6.1.4.1.230.5.6.9.3.1.7 |
nvIticlassClasmsgidClass Info Message Id (clasmsgid)
This parameter controls the facility that is used to send a greeting
message to users successfully connecting to the PAD.
A terminal port will send the message to the terminal while
a host port will send it across the virtual call to the
user.
The value is an index into string storage.
If the specified string contains the two consecutive characters '%s'
then the first occurance of those two characters will be replaced
by a string naming the port. This may be usefull when a user
wishes to know exactly what the remote destination port is
when the destination port is a member of a hunt group.
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.8 |
nvIticlassClaspaswdClass Password (claspaswd)
This field contains the password associated with this
user.
When a userid and password are prompted for then the values supplied
by the user must match the USERNAME and PASSWORD fields of one of
the records in the nvIticlass file. If no match is made then access is
denied.
If this field is NULL then only the user's name is required and the
supplied password is not checked.rw DisplayString .1.3.6.1.4.1.230.5.6.9.3.1.9 |
nvIticlassCmdtimoutX.28 Command Timeout (cmdtimout)
Timeout value (in seconds) when waiting for user to enter a command.
If the value is zero,the command timeout facility is disabled.
Default value is 60.rw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.10 |
nvIticlassCugClosed User Group Identifier (cug)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.11 |
nvIticlassDatacmdData Command (datacmd)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.12 |
nvIticlassDefwszeDefault Window Size (defwsze)
This field specifies the window size to be used when transmitting
packets. It is the maximum number packets that can be transmitted
before an acknowledgement is received.
Default value is 2.rw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.13 |
nvIticlassDefpszeDefault Packet Size (defpsze)
This field specifies which packet size to use when packetizing
data to be sent accross a virtual circuit.
Default value is 7+1.rw Enumeration .1.3.6.1.4.1.230.5.6.9.3.1.14 |
nvIticlassDevtypeDevice Type (devtype)
This field is used to control ITI actions depending upon whether
the port is
connected to a host or terminal.
For example,a terminal interface will recognize Break,while
a host interface may have to generate one.
Default value is 1+1.rw Enumeration .1.3.6.1.4.1.230.5.6.9.3.1.15 |
nvIticlassExitcmdExit Command (exitcmd)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.16 |
nvIticlassFastselFast Select Calling (fastsel)
This field determines whether fast select calls may be placed
or received
Default value is 4+1.rw Enumeration .1.3.6.1.4.1.230.5.6.9.3.1.17 |
nvIticlassIchrgIncoming Charging Restriction (ichrg)
This field controls the incoming charging options
allowed for this session.
Normally used on a host interface.
Default value is 1+1.rw Enumeration .1.3.6.1.4.1.230.5.6.9.3.1.18 |
nvIticlassInactivtyData Mode Inactivity Timeout (inactivty)
Timeout value (in minutes) when waiting for data transfer
after call has been connected.
If set to zero then no timeout occurs.
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.19 |
nvIticlassIncbarIncoming Call Restriction (incbar)
This field is used to bar specified incoming calls.
Normally used on a host interface.
Default value is 2+1.rw Enumeration .1.3.6.1.4.1.230.5.6.9.3.1.20 |
nvIticlassInitcmdInitial Automatic Command Id (initcmd)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.21 |
nvIticlassMaskstrngstring containing echo mask sequence
Default value is 0.
string MUST be defined BEFORE it can
be referenced in this field.rw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.22 |
nvIticlassMaxpszeMaximum Packet Size (maxpsze)
This field specifies which packet size to use when packetizing
data to be sent accross a virtual circuit.
Default value is 7+1.rw Enumeration .1.3.6.1.4.1.230.5.6.9.3.1.23 |
nvIticlassMaxwszeMaximum Window Size (maxwsze)
This field specifies the window size to be used when transmitting
packets. It is the maximum number packets that can be transmitted
before an acknowledgement is received.
Default value is 2.rw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.24 |
nvIticlassOchrgOutgoing Charging Restriction (ochrg)
This field controls the outgoing charging options permitted
during this session.
Normally used on a terminal interface.
Default value is 1+1.rw Enumeration .1.3.6.1.4.1.230.5.6.9.3.1.25 |
nvIticlassOutbarOutgoing Call Restriction (outbar)
This field is used to bar specified outgoing calls.
Normally used on a terminal interface.
Default value is 3+1.rw Enumeration .1.3.6.1.4.1.230.5.6.9.3.1.26 |
nvIticlassPrefixidService Signal Prefix Id (prefixid)
This parameter indicates the prefix string
that is prefixed to all replies from ITI.
This value is an index into string storage.
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.27 |
nvIticlassProfileInitial X.3 Parameter Profile (profile)
This field specifies which X.3 parameter profile is to
be used for the session. The terminal parameter table is
initialized with the specified values.
Users are free to change their own parameters.
Whenever a session is terminated,via a timeout,a broken connection
or a cleared call,the X.3 profile is reloaded for the user when
the Network Processor is next accessed.
This facility is used by both terminal and host interfaces to set
up initial parameters.
This field is an index into the ITIPROF file.rw DisplayString .1.3.6.1.4.1.230.5.6.9.3.1.28 |
nvIticlassPromptidX.28 Prompt Identification (promptid)
This parameter indicates the prompt to be used
to solicit a user response.
This value is an index into string storage.
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.29 |
nvIticlassPvcidPVC Identifier (pvcid)
This field is used to select a network provided permanent
virtual circuit for the session.rw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.30 |
nvIticlassRejectidReject Service Message Id (rejectid)
This field controls the facility that is used to send a service
refusal message to the user and to disconnect the call.
An example of use would be on a host pad when the host is
down.
A terminal port will send the message to the terminal and clear the
physical connection.
A host port will send the message across the virtual call to the user,
and follow it by an invitation to clear.
The value is an index into string storage.
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.31 |
nvIticlassRpoacodeRPOA Code (rpoacode)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.32 |
nvIticlassRpoatypeRPOA Type (rpoatype)
Default value is 2+1.rw Enumeration .1.3.6.1.4.1.230.5.6.9.3.1.33 |
nvIticlassSecurityAccess Method (security)
Default value is 1+1.rw Enumeration .1.3.6.1.4.1.230.5.6.9.3.1.34 |
nvIticlassTermtypeTerminal Type (termtype)
Default value is 1+1.rw Enumeration .1.3.6.1.4.1.230.5.6.9.3.1.35 |
nvIticlassX28typeX.28 Command Set (x28type) Default value is 1+1.rw Enumeration .1.3.6.1.4.1.230.5.6.9.3.1.36 |
nvIticlassX3typeX.3 Parameter Profile Type (x3type)
Many implementations of X.3 may be found in today's public data
networks. A parameter on one network may mean something different
on another one. Or the allowable values may be different.
This field selects which parameter standard is to be used in
the X.28 (user interface) and X.29 (remote computer) interfaces.
It is important that a user know and conform to the parameter
standard being used by a remote PAD. Otherwise commands sent from
the remote PAD to set local parameters may not be interpreted
properly.
Default value is 1+1.rw Enumeration .1.3.6.1.4.1.230.5.6.9.3.1.37 |
nvIticlassXoffinInput XOFF Character (xoffin)
Second user selectable XOFF charcter.
This character functions in an input only capacity and is not
output by the PAD as an XOFF chaacter.
Default value is 19.rw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.38 |
nvIticlassXoffoutOutput XOFF Character (xoffout)
User selectable XOFF character.
Default value is 19.rw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.39 |
nvIticlassXoninInput XON Character (xonin)
Second user selectable XON charcter.
This character functions in an input only capacity and is not
output by the PAD as an XON character.
Default value is 17.rw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.40 |
nvIticlassXonoutOutput XON Character (xonout)
User selectable XON character.
Default value is 17.rw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.41 |
nvIticlassTidpromptrw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.42 |
nvIticlassStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.6.9.3.1.43 |
nvIticlassEsccharescape character use default is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.44 |
nvIticlassInvclrcmdclear Command (initcmd)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.45 |
nvIticlassX29mskstrrw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.46 |
nvIticlassDroptimerlength of time before disconnecting a call
default 0rw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.47 |
nvIticlassClasmodePadding.rw Enumeration .1.3.6.1.4.1.230.5.6.9.3.1.48 |
nvIticlassDialoutdial-out stringrw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.49 |
nvIticlassCallingidWhat to do with call id.rw Enumeration .1.3.6.1.4.1.230.5.6.9.3.1.50 |
nvIticlassAcctngAccountingrw Enumeration .1.3.6.1.4.1.230.5.6.9.3.1.51 |
nvIticlassInvclrtimTimeout for Invitation to Clearrw INTEGER .1.3.6.1.4.1.230.5.6.9.3.1.52 |
nvIticlassComfacLower or Upper case service signals.
lcfac = lower case with fac
ucfac = upper case with fac
lcnofac = lower case with no fac
ucnofac = upper case no fac.rw Enumeration .1.3.6.1.4.1.230.5.6.9.3.1.53 |
nvIticmd OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.6.10 |
nvIticmdMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.6.10.1 |
nvIticmdNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.6.10.2 |
nvIticmdTableiticmd file. SEQUENCE OF NvIticmdEntry .1.3.6.1.4.1.230.5.6.10.3 |
nvIticmdEntryiticmd record. NvIticmdEntry .1.3.6.1.4.1.230.5.6.10.3.1 |
nvIticmdIndexIndex of iticmd recordro INTEGER .1.3.6.1.4.1.230.5.6.10.3.1.1 |
nvIticmdCommandCommand Mnemonic (command)
Command name,this string is entered by the user and is matched
against entries in this file. If successful,the matched string is
taken as user input and processed.rw DisplayString .1.3.6.1.4.1.230.5.6.10.3.1.2 |
nvIticmdClassClass of Service (class)
Name of class that owns command.rw DisplayString .1.3.6.1.4.1.230.5.6.10.3.1.3 |
nvIticmdStringidFull Command Name Id (stringid)
Index into string storage for replacement value.rw INTEGER .1.3.6.1.4.1.230.5.6.10.3.1.4 |
nvIticmdStatusrw Enumeration .1.3.6.1.4.1.230.5.6.10.3.1.5 |
nvIticonf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.6.11 |
nvIticonfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.6.11.1 |
nvIticonfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.6.11.2 |
nvIticonfTableiticonf file. SEQUENCE OF NvIticonfEntry .1.3.6.1.4.1.230.5.6.11.3 |
nvIticonfEntryiticonf record. NvIticonfEntry .1.3.6.1.4.1.230.5.6.11.3.1 |
nvIticonfIndexIndex of iticonf recordro INTEGER .1.3.6.1.4.1.230.5.6.11.3.1.1 |
nvIticonfNumcopyNumber of Simultaneous Copies (numcopy)
This field specifies how many ITI ports may be copying network
data at one time.
Default value is 4.rw INTEGER .1.3.6.1.4.1.230.5.6.11.3.1.2 |
nvIticonfBroadcastBroadcast Message Id (broadcast)
This field identifies a string which is to be broadcast to a
port following a service request but before security checking.
Replacing the nvIticonf record will cause the message to be
broadcast to all active iti ports that have service signals enabled.rw INTEGER .1.3.6.1.4.1.230.5.6.11.3.1.3 |
nvIticonfItiswitchITI Switch (itiswitch)
This field will be used to tell NBUS whether outgoing calls
can be looped back (ITI to ITI calls allowed)
Default value is ysr (1+1).rw Enumeration .1.3.6.1.4.1.230.5.6.11.3.1.4 |
nvIticonfPadaddrPAD Address Field (padaddr)rw DisplayString .1.3.6.1.4.1.230.5.6.11.3.1.5 |
nvIticonfDnicData Network Identification Code (dnic)
DNIC number when calmethod=special in nvIticlass file.rw INTEGER .1.3.6.1.4.1.230.5.6.11.3.1.6 |
nvIticonfConfigstrCONSAT facility mapping string.rw INTEGER .1.3.6.1.4.1.230.5.6.11.3.1.7 |
nvIticonfValserveraddress of validation server
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.11.3.1.8 |
nvIticonfV120p1164k 1, p11 for v.120 set for 64000
urate 2, p11 for v.120 from user rate in ISDNrw Enumeration .1.3.6.1.4.1.230.5.6.11.3.1.10 |
nvItimap OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.6.12 |
nvItimapMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.6.12.1 |
nvItimapNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.6.12.2 |
nvItimapTableitimap file. SEQUENCE OF NvItimapEntry .1.3.6.1.4.1.230.5.6.12.3 |
nvItimapEntryitimap record. NvItimapEntry .1.3.6.1.4.1.230.5.6.12.3.1 |
nvItimapIndexIndex of itimap recordro INTEGER .1.3.6.1.4.1.230.5.6.12.3.1.1 |
nvItimapNetaddrNetwork X.121 Address (netaddr)
This field contains the pattern against which the incoming network
address is matched.rw DisplayString .1.3.6.1.4.1.230.5.6.12.3.1.2 |
nvItimapUserdataUser Data (userdata)
This field contains the pattern against which the associated call
user data is matched.rw DisplayString .1.3.6.1.4.1.230.5.6.12.3.1.3 |
nvItimapClassClass of Port Assignment (class)
This field indicates which ITI 'user' is
associated with the network address and call user data.
If the PORT field in this record is NULL then the actual
port is located by processing the itihunt file.rw DisplayString .1.3.6.1.4.1.230.5.6.12.3.1.4 |
nvItimapStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.6.12.3.1.5 |
nvItiprof OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.6.13 |
nvItiprofMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.6.13.1 |
nvItiprofNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.6.13.2 |
nvItiprofTableitiprof file. SEQUENCE OF NvItiprofEntry .1.3.6.1.4.1.230.5.6.13.3 |
nvItiprofEntryitiprof record. NvItiprofEntry .1.3.6.1.4.1.230.5.6.13.3.1 |
nvItiprofIndexIndex of itiprof recordro INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.1 |
nvItiprofNameProfile Name (name)
Name of profile. Used by ITI 'prof' command to locate
specified record.rw DisplayString .1.3.6.1.4.1.230.5.6.13.3.1.2 |
nvItiprofP1PAD Recall Character (p1)
This parameter indicates whether or not the
transmission of a DLE character (ASCII value of 16.) from
the terminal to the PAD is recognized as an escape from the data
transfer state. If so,transmission of DLE will cause the
virtual call to be suspended,
allowing the terminal user to send commands to the PAD.
(0) = No escape allowed
(1) = Escape allowed
Default value is 1.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.3 |
nvItiprofP2Echo Enable/Disable (p2)
This parameter indicates to the PAD whether or not
the terminal input data is to be echoed.
If so,characters typed in from the terminal keyboard will be
transmitted back to the terminal as well as being interpreted by
the PAD. Transmission costs can be reduced by having the PAD echo
characters rather than having a remote host doing the echoing.
(0) = No echo
(1) = Echo
Default value is 1.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.4 |
nvItiprofP3Packet Forwarding Characters (p3)
This parameter indicates to the PAD the set of terminal generated
characters that will cause data to be forwarded to the
destination. When a data forwarding signal is received then all
buffered data is assembled into a packet and sent to the destination.
(0) = No signals
(2) = CR
(6) = CR,ESC,BEL,ENQ,ACK
(18) = CR,EOT,ETX
(126) = all control characters (ASCII values from 1. to 31.) and DEL
Default value is 2.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.5 |
nvItiprofP4Forwarding Idle Timer (p4)
This parameter indicates to the PAD whether data forwarding is to be
based on timeouts.
If so,then the value of the parameter specifies the time limit
imposed on the buffering of data characters.
Each received data character will reset the timer until eventually
a pause in the character stream will allow the timer to expire
and all buffered data will be forwarded.
(0) = No timer
(1-255) = Indicates the value of the delay in twentieths of a second.
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.6 |
nvItiprofP5Device Flow Control (p5)
This parameter indicates whether the terminal will respond to flow
control. If so,then this will allow the PAD to stop
(by sending an XOFF character) and start (by sending an XON character)
transmission from the terminal so that the PAD can pace the terminal.
Flow control using modem signals is not supported.
(0) = No auxiliary device control
(1) = xon/xoff flow control (data transfer)
Default value is 1.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.7 |
nvItiprofP6Service Signal Control (p6)
This parameter indicates to the PAD whether or not
network generated messages are to be transmitted to the terminal.
(0) = No messages sent
(1) = Send service messages
(4) = Send prompts only
Default value is 5.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.8 |
nvItiprofP7Device BREAK Action (p7)
This parameter is used to indicate how the PAD should process a BREAK
signal that is received from the terminal while the terminal is in
data transfer state.
(0) = Nothing
(1) = Send interrupt
(2) = Send reset
(8) = Escape from data state
(21) = Discard output,send interrupt and indication of break
Default value is 21.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.9 |
nvItiprofP8Output Discard (p8)
This parameter is used in conjunction with Parameter 7. Depending
upon the BREAK procedure selected,this parameter may be set by
the PAD when the terminal user requests that terminal data be
discarded. This parameter must then be reset by the destination
to allow normal delivery. The PAD will discard all packets
destined for the terminal from the time the PAD sets this
parameter (ie. BREAK) and the time the parameter is reset by the
destination. This feature can be used,for example,to allow users to
terminate lengthy outputs to terminals by pressing BREAK.
(0) = Normal delivery
(1) = Discard output
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.10 |
nvItiprofP9Carriage Return Padding (p9)
This parameter specifies the number of padding characters to be
inserted by the PAD following a carriage return transmitted to the
terminal. This would allow mechanical actions
(such as type-ball returns) to be completed before
more data is to be output.
(0) = No padding
(1-255) = Number of pads to be inserted
Default value is 4.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.11 |
nvItiprofP10Line Length (p10)
This parameter indicates the maximum number of printable characters
that can be displayed on the terminal before the PAD must be sent a
format effector (ie. CR LF). This causes data to be output on the
next line on the terminal.
(0) = No line folding
(1-255) = Number of characters per line
Default value is 80.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.12 |
nvItiprofP11Transmission Speed (Read Only) (p11)
This parameter is set by the PAD as the result of transmission speed
detection if the terminal access is an autobaud port. When a port
with fixed speed is used,this parameter is set during PAD
configuration,based on the pre-configured value.
(0) = 110 bps
(1) = 134.5 bps
(2) = 300 bps
(3) = 1200 bps
(4) = 600 bps
(5) = 75 bps
(6) = 150 bps
(7) = 1800 bps
(8) = 200 bps
(9) = 100 bps
(10) = 50 bps
(11) = 75/1200
(12) = 2400
(13) = 4800
(14) = 9600rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.13 |
nvItiprofP12PAD Flow Control (p12)
This parameter enables the terminal to indicate to the PAD that the
terminal cannot receive any more data. When this parameter is set
to 1,the terminal user can request that the PAD stop sending data
by transmitting a DC3 character. The PAD then suspends transmission
of data until a DC1 character is received. This feature allows a
display terminal user to indicate when the PAD should suspend the
scrolling of terminal output,so that it can be viewed. Then the
output can be restarted.
(0) = No flow control
(1) = Flow control
Default value is 1.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.14 |
nvItiprofP13Line Feed Insertion (p13)
This parameter specifies when the PAD should insert Linefeed upon
receipt of carriage return from the terminal or destination. As the
parameter value is bit-encoded,any combination is permissible.
(0) = No linefeed insertion
(1) = Insert after carriage return to terminal
(2) = Insert in data stream after carriage return from terminal
(4) = Insert linefeed after echo of carriage return to terminal
Default value is 4.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.15 |
nvItiprofP14Line Feed Padding (p14)
This parameter provides for the automatic insertion by the PAD of
padding characters or time delays after occurrence of a linefeed
character.
(0) = No padding
(1-255) = Padding after linefeed
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.16 |
nvItiprofP15Editing Enable/Disable (p15)
This parameter sets character delete,line delete,and line display
actions in the data transfer state. Editing is always available in
the command state.
(0) = No editing
(1) = Editing enabled (data state)
Default value is 1.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.17 |
nvItiprofP16Character Delete Character (p16)
This parameter specifies the ASCII character to be used as
a 'character delete' character for local editing by the PAD.
(0) = No delete character
Default value is 8.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.18 |
nvItiprofP17Line Delete Character (p17)
This parameter specifies the ASCII character to be used as a 'line delete'
character for local editing by the PAD.
(0) = No line delete
Default value is 24.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.19 |
nvItiprofP18Line Display Character (p18)
This parameter specifies the ASCII character to be used as a 'line redisplay'
character for local editing by the PAD.
(0) = No line redisplay.
Default value is 18.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.20 |
nvItiprofP19Service Signal Editing (p19)
(0) = None
(1) = Printing terminal edit
(2) = CRT terminal editing
Default value is 2.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.21 |
nvItiprofP20Echo Mask (p20)
This parameter specifies which characters are not echoed to the
device (when p2 is set to 1).
(0) = No mask (echo all)
(1) = No echo CR
(2) = No echo LF
(4) = No echo VT,HT,FF
(8) = No echo BEL,BS
(16) = No echo ESC,ENQ
(32) = No echo ACK,NAK,STX,SOH,EOT,ETX,ETB
(64) = No echo of parameters 16,17,18
(128) = No echo of control characters not named above
Default value is 6.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.22 |
nvItiprofP21Parity Treatment (p21)
This parameter specifies whether or not the PAD should detect,check and
generate parity.
(0) = No parity detection or generation
(1) = Parity checking and PAD handles any parity errors
(2) = Parity generation,PAD sets the parity bit for each ASCII
character.
Default value is 3.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.23 |
nvItiprofP22Page Wait (p22)
This parameter specifies the number of lines (line-feeds) that will be
sent to the attached device before output is halted.
Output is subsequently resumed after an XON character or any
packetizing character is received from the device.
(0) = No page wait enabled
(1-255) = Number of lines output before page wait condition
Default value is 23.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.24 |
nvItiprofP23First Extra Forwarding Character (p23)
This parameter allow the definition of an additional data forwarding signal.
This signal is in addition to those specified by parameters 3 and 4.
(0) = No extra character
(1-127) = ASCII code of character
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.25 |
nvItiprofP24Second Extra Forwarding Character (p24)
This parameter allows the definition of an additional data forwarding signal.
This signal is in addition to those characters specified by parameter 3 and 4.
(0) = No extra character
(1-127) = ASCII code of character
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.26 |
nvItiprofP25Output Pending Timer (p25)
This parameter specifies the length of time,if any,that terminal output
will be blocked by terminal input.
(0) = No output pending timer. That is,output is not blocked by input
(such as in half-duplex transmission).
(1-255) = Delay in seconds
Default value is 1.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.27 |
nvItiprofP26Interval Timer (p26)
Maximum time,in 1/20 seconds,between transmission of packets.
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.28 |
nvItiprofP27Horizontal Tab Padding (p27)
Number of nulls to output after a TAB.
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.29 |
nvItiprofP28XON Character to PAD (p28)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.30 |
nvItiprofP29XOFF Character to PAD (p29)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.31 |
nvItiprofP30XON Character to Device (p30)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.32 |
nvItiprofP31XOFF Character to Device (p31)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.33 |
nvItiprofP32Packet Forward on Character Count (p32)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.34 |
nvItiprofP33CONSAT parameter 101 (TAB echo)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.35 |
nvItiprofP34CONSAT parameter 102 (TAB expansion)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.36 |
nvItiprofP35CONSAT parameter 103 (BREAK key)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.13.3.1.37 |
nvItiprofStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.6.13.3.1.38 |
nvItirpoa OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.6.14 |
nvItirpoaMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.6.14.1 |
nvItirpoaNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.6.14.2 |
nvItirpoaTableitirpoa file. SEQUENCE OF NvItirpoaEntry .1.3.6.1.4.1.230.5.6.14.3 |
nvItirpoaEntryitirpoa record. NvItirpoaEntry .1.3.6.1.4.1.230.5.6.14.3.1 |
nvItirpoaIndexIndex of itirpoa recordro INTEGER .1.3.6.1.4.1.230.5.6.14.3.1.1 |
nvItirpoaCodeRPOA Code (code)rw INTEGER .1.3.6.1.4.1.230.5.6.14.3.1.2 |
nvItirpoaCarrierRPOA Name (carrier)rw DisplayString .1.3.6.1.4.1.230.5.6.14.3.1.3 |
nvItirpoaStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.6.14.3.1.4 |
nvItiuser OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.6.15 |
nvItiuserMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.6.15.1 |
nvItiuserNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.6.15.2 |
nvItiuserTableitiprof file. SEQUENCE OF NvItiuserEntry .1.3.6.1.4.1.230.5.6.15.3 |
nvItiuserEntryitiuser record. NvItiuserEntry .1.3.6.1.4.1.230.5.6.15.3.1 |
nvItiuserIndexIndex of itiuser recordro INTEGER .1.3.6.1.4.1.230.5.6.15.3.1.1 |
nvItiuserUsernameUser Name (username)rw DisplayString .1.3.6.1.4.1.230.5.6.15.3.1.2 |
nvItiuserCallbackUser Callback Number Id (callback)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.15.3.1.3 |
nvItiuserClrestrctClass Restriction (clrestrct)
Default value is 1+1.rw Enumeration .1.3.6.1.4.1.230.5.6.15.3.1.4 |
nvItiuserInitcmdInitial Automatic Command Id (initcmd)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.6.15.3.1.5 |
nvItiuserUserclassClass Assignment (userclass)rw DisplayString .1.3.6.1.4.1.230.5.6.15.3.1.6 |
nvItiuserUserpaswdUser Password (userpaswd)rw DisplayString .1.3.6.1.4.1.230.5.6.15.3.1.7 |
nvItiuserStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.6.15.3.1.8 |
nvItiuserNumberCall back numberrw DisplayString .1.3.6.1.4.1.230.5.6.15.3.1.9 |
nvItiport OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.6.16 |
nvItiportMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.6.16.1 |
nvItiportNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.6.16.2 |
nvItiportTableitiport file. SEQUENCE OF NvItiportEntry .1.3.6.1.4.1.230.5.6.16.3 |
nvItiportEntryitiport record. NvItiportEntry .1.3.6.1.4.1.230.5.6.16.3.1 |
nvItiportIndexIndex of itiport file.ro INTEGER .1.3.6.1.4.1.230.5.6.16.3.1.1 |
nvItiportNameName of ITI instance.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.230.5.6.16.3.1.2 |
nvItiportEnablendicates whether port is enabled.rw Enumeration .1.3.6.1.4.1.230.5.6.16.3.1.3 |
nvItiportIticlassClass of Service associated with ITI port.rw DisplayString .1.3.6.1.4.1.230.5.6.16.3.1.5 |
nvItiportRsrcpoolName of Resource Pool.rw DisplayString .1.3.6.1.4.1.230.5.6.16.3.1.6 |
nvItiportPortnameName of physical port or Device Usage Group.rw DisplayString .1.3.6.1.4.1.230.5.6.16.3.1.7 |
nvItiportTimer1TID timeout.rw INTEGER .1.3.6.1.4.1.230.5.6.16.3.1.8 |
nvItiportMinbspaceModem Train timer.rw INTEGER .1.3.6.1.4.1.230.5.6.16.3.1.9 |
nvItiportMaxbspaceMaximum preallocated buffer space.rw INTEGER .1.3.6.1.4.1.230.5.6.16.3.1.10 |
nvItiportFclevelBuffer space left which causes flow control.rw INTEGER .1.3.6.1.4.1.230.5.6.16.3.1.11 |
nvItiportModePort moderw Enumeration .1.3.6.1.4.1.230.5.6.16.3.1.12 |
nvItiportTimer0TID timeout.rw INTEGER .1.3.6.1.4.1.230.5.6.16.3.1.13 |
nvItiportTimer2TID timeout.rw INTEGER .1.3.6.1.4.1.230.5.6.16.3.1.14 |
nvDuiconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.6.17 |
nvDuiconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.6.17.1 |
nvDuiconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.6.17.2 |
nvDuiconfTableduiconf file. SEQUENCE OF NvDuiconfEntry .1.3.6.1.4.1.230.5.6.17.3 |
nvDuiconfEntryduiconf record. NvDuiconfEntry .1.3.6.1.4.1.230.5.6.17.3.1 |
nvDuiconfIndexindexro INTEGER .1.3.6.1.4.1.230.5.6.17.3.1.1 |
nvDuiconfTypeType of DUI Circuit.ro Enumeration .1.3.6.1.4.1.230.5.6.17.3.1.2 |
nvDuiconfNuaX.121 address of DUI host.rw DisplayString .1.3.6.1.4.1.230.5.6.17.3.1.3 |
nvDuiconfCallingcalling address.rw DisplayString .1.3.6.1.4.1.230.5.6.17.3.1.4 |
nvDuiconfFirsttrynum seconds til first try.rw INTEGER .1.3.6.1.4.1.230.5.6.17.3.1.5 |
nvDuiconfRetrytimenum seconds for retry.rw INTEGER .1.3.6.1.4.1.230.5.6.17.3.1.6 |
nvDuiconfRetryincretry time increment (in seconds).rw INTEGER .1.3.6.1.4.1.230.5.6.17.3.1.7 |
nvDuiconfStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.6.17.3.1.9 |
nvDlspcconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.6.18 |
nvDlspcconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.6.18.1 |
nvDlspcconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.6.18.2 |
nvDlspcconfTabledlspcconf file. SEQUENCE OF NvDlspcconfEntry .1.3.6.1.4.1.230.5.6.18.3 |
nvDlspcconfEntrydlspcconf record. NvDlspcconfEntry .1.3.6.1.4.1.230.5.6.18.3.1 |
nvDlspcconfIndexDlspcconf file record number.ro INTEGER .1.3.6.1.4.1.230.5.6.18.3.1.1 |
nvDlspcconfNodenamename of node.rw DisplayString .1.3.6.1.4.1.230.5.6.18.3.1.2 |
nvDlspcconfSitenamename of site.rw DisplayString .1.3.6.1.4.1.230.5.6.18.3.1.3 |
nvDlspcconfHelpphonephone number part of help message.rw DisplayString .1.3.6.1.4.1.230.5.6.18.3.1.4 |
nvDlspcconfAbortmsgmessage if session cannot be resumed.rw INTEGER .1.3.6.1.4.1.230.5.6.18.3.1.5 |
nvDlspcconfPidtableto map X.3 P11 into protocol id.rw INTEGER .1.3.6.1.4.1.230.5.6.18.3.1.6 |
nvDlspcconfPortalarmnumber of idle ports to cause alarm.rw INTEGER .1.3.6.1.4.1.230.5.6.18.3.1.7 |
nvDlspcconfStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.6.18.3.1.8 |
nevadaSync OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.7 |
nvDlstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.7.1 |
nvDlstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.7.1.1 |
nvDlstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.7.1.2 |
nvDlstatTabledlstat file. SEQUENCE OF NvDlstatEntry .1.3.6.1.4.1.230.5.7.1.3 |
nvDlstatEntrydlstat record. NvDlstatEntry .1.3.6.1.4.1.230.5.7.1.3.1 |
nvDlstatIndexIndex of dlstatro INTEGER .1.3.6.1.4.1.230.5.7.1.3.1.1 |
nvDlstatLinknamename of link being used
Initial status is 0+1.ro Enumeration .1.3.6.1.4.1.230.5.7.1.3.1.2 |
nvDlstatApplink appearence
Initial status is 0+1.ro Enumeration .1.3.6.1.4.1.230.5.7.1.3.1.3 |
nvDlstatLfrmrreason code from last FRMR received
Initial status is 0+1.ro Enumeration .1.3.6.1.4.1.230.5.7.1.3.1.4 |
nvDlstatLresetreason for last link reset
Initial status is 0+1.ro Enumeration .1.3.6.1.4.1.230.5.7.1.3.1.5 |
nvDlstatMstatemain state of link
Initial status is 0+1.ro Enumeration .1.3.6.1.4.1.230.5.7.1.3.1.6 |
nvDlstatProtocollink procedure selected
Initial status is 3+1.ro Enumeration .1.3.6.1.4.1.230.5.7.1.3.1.7 |
nvDlstatPstatea. primary UP state
Initial status is 1+1.ro Enumeration .1.3.6.1.4.1.230.5.7.1.3.1.8 |
nvDlstatSstateSecondary UP state . Initial status is 1+1.ro Enumeration .1.3.6.1.4.1.230.5.7.1.3.1.9 |
nvDlstatAbtfrxsa. Number of aborted frames received
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.1.3.1.10 |
nvDlstatAlarmsNumber of alarms.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.1.3.1.11 |
nvDlstatFrmrrxsa. Number of frame-reject frames received
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.1.3.1.12 |
nvDlstatFrmrtxsNumber of frame-reject frames transmitted.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.1.3.1.13 |
nvDlstatIfrxsNumber of I-frames received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.1.3.1.14 |
nvDlstatIftxsNumber of I-frames transmitted.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.1.3.1.15 |
nvDlstatRejrxsNumber of REJ-frames received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.1.3.1.16 |
nvDlstatRejtxsNumber of REJ-frames transmitted.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.1.3.1.17 |
nvDlstatRnrrxsNumber of RNR-frames received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.1.3.1.18 |
nvDlstatRnrtxsNumber of RNR-frames transmitted.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.1.3.1.19 |
nvDlstatRrrxsNumber of RR-frames received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.1.3.1.20 |
nvDlstatRrtxsNumber of RR-frames transmitted.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.1.3.1.21 |
nvDlstatRxddsNumber of receive device-driver errors.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.1.3.1.22 |
nvDlstatToutsNumber of link resets due to remote timeouts.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.1.3.1.23 |
nvDlstatTretrysNumber of retries due to remote timeouts.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.1.3.1.24 |
nvDlstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.7.1.3.1.25 |
nvLinkstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.7.2 |
nvLinkstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.7.2.1 |
nvLinkstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.7.2.2 |
nvLinkstatTablelinkstat file. SEQUENCE OF NvLinkstatEntry .1.3.6.1.4.1.230.5.7.2.3 |
nvLinkstatEntrylinkstat record. NvLinkstatEntry .1.3.6.1.4.1.230.5.7.2.3.1 |
nvLinkstatIndexIndex of linkstat recordro INTEGER .1.3.6.1.4.1.230.5.7.2.3.1.1 |
nvLinkstatPortname of port being used
Initial status is 0.ro DisplayString .1.3.6.1.4.1.230.5.7.2.3.1.2 |
nvLinkstatApplink appearence Initial status is 0+1.ro Enumeration .1.3.6.1.4.1.230.5.7.2.3.1.3 |
nvLinkstatFstatemain state of FLTE FSM
Initial status is 0+1.ro Enumeration .1.3.6.1.4.1.230.5.7.2.3.1.4 |
nvLinkstatLfrmrreason code from last FRMR received
Initial status is 0+1.ro Enumeration .1.3.6.1.4.1.230.5.7.2.3.1.5 |
nvLinkstatLresetreason for last link reset
Initial status is 0+1.ro Enumeration .1.3.6.1.4.1.230.5.7.2.3.1.6 |
nvLinkstatN1actual n1 used (in bits)
Initial status is 0.ro INTEGER .1.3.6.1.4.1.230.5.7.2.3.1.7 |
nvLinkstatProtocollink procedure selected
Initial status is 3+1.ro Enumeration .1.3.6.1.4.1.230.5.7.2.3.1.8 |
nvLinkstatAbtfrxsNumber of aborted frames received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.2.3.1.9 |
nvLinkstatAlarmsNumber of alarms.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.2.3.1.10 |
nvLinkstatFrmrrxsNumber of frame-reject frames received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.2.3.1.11 |
nvLinkstatFrmrtxsNumber of frame-reject frames transmitted.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.2.3.1.12 |
nvLinkstatIfrxsNumber of I-frames received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.2.3.1.13 |
nvLinkstatIftxsNumber of I-frames transmitted.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.2.3.1.14 |
nvLinkstatRejrxsNumber of REJ-frames received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.2.3.1.15 |
nvLinkstatRejtxsNumber of REJ-frames transmitted.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.2.3.1.16 |
nvLinkstatRnrrxsNumber of RNR-frames received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.2.3.1.17 |
nvLinkstatRnrtxsNumber of RNR-frames transmitted.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.2.3.1.18 |
nvLinkstatRrrxsNumber of RR-frames received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.2.3.1.19 |
nvLinkstatRrtxsNumber of RR-frames transmitted.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.2.3.1.20 |
nvLinkstatRxddsNumber of receive device-driver errors.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.2.3.1.21 |
nvLinkstatToutsNumber of link resets due to remote timeouts.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.2.3.1.22 |
nvLinkstatTretrysNumber of retries due to remote timeouts.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.2.3.1.23 |
nvLinkstatTchartxsNumber of characters sent.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.2.3.1.24 |
nvLinkstatTcharrxsNumber of characters received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.7.2.3.1.25 |
nvLinkstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.7.2.3.1.26 |
nvLinkstatNlinkupNumber of times link came up.ro Counter .1.3.6.1.4.1.230.5.7.2.3.1.27 |
nvDlconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.7.3 |
nvDlconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.7.3.1 |
nvDlconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.7.3.2 |
nvDlconfTabledlconf file. SEQUENCE OF NvDlconfEntry .1.3.6.1.4.1.230.5.7.3.3 |
nvDlconfEntrydlconf record. NvDlconfEntry .1.3.6.1.4.1.230.5.7.3.3.1 |
nvDlconfDlnumberData Link Record (dlnumber)
Number of the DL,ie,record id# in DLCONF file.
Parameter is set during factory configuration.ro INTEGER .1.3.6.1.4.1.230.5.7.3.3.1.2 |
nvDlconfLinknameLink Name (linkname)rw Enumeration .1.3.6.1.4.1.230.5.7.3.3.1.3 |
nvDlconfPuaddrPolling Address (puaddr)
Default value is 0.rw DisplayString .1.3.6.1.4.1.230.5.7.3.3.1.4 |
nvLinkconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.7.4 |
nvLinkconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.7.4.1 |
nvLinkconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.7.4.2 |
nvLinkconfTablelinkconf file. SEQUENCE OF NvLinkconfEntry .1.3.6.1.4.1.230.5.7.4.3 |
nvLinkconfEntrylinkconf record. NvLinkconfEntry .1.3.6.1.4.1.230.5.7.4.3.1 |
nvLinkconfIndexIndex of linkconf recordro INTEGER .1.3.6.1.4.1.230.5.7.4.3.1.1 |
nvLinkconfLinknameLink Name (linkname)
Link name and number (ie,'Link1')
Parameter is set during factory configuration.ro Enumeration .1.3.6.1.4.1.230.5.7.4.3.1.2 |
nvLinkconfPortnamePort to serve this link.rw DisplayString .1.3.6.1.4.1.230.5.7.4.3.1.3 |
nvLinkconfRsrcpoolResource Pool Name.rw DisplayString .1.3.6.1.4.1.230.5.7.4.3.1.4 |
nvLinkconfProtocolLink-Level Protocol (protocol)
This field defines the Synchronous Link link procedure
that is to be followed.
Default value is 3+1.rw Enumeration .1.3.6.1.4.1.230.5.7.4.3.1.5 |
nvLinkconfWszeLink-Level Window Size (wsze)
Option to select window size to be used.
Between 1 and 7 for modulo 8.
Between 1 and 127 for modulo 127.
Default value is 7.rw INTEGER .1.3.6.1.4.1.230.5.7.4.3.1.6 |
nvLinkconfHostinactSDLC Host Inactivity Timer (hostinact)
SDLC secondary station maximum wait without host contact.
Default value is 600.rw INTEGER .1.3.6.1.4.1.230.5.7.4.3.1.9 |
nvLinkconfN2Number of Retransmissions (n2)
Maximum number of times a data frame will be retransmitted,
before resetting the link.
Default value is 10.rw INTEGER .1.3.6.1.4.1.230.5.7.4.3.1.11 |
nvLinkconfPollthresSDLC Poll Threshold (pollthres)
Default value is 20.rw INTEGER .1.3.6.1.4.1.230.5.7.4.3.1.12 |
nvLinkconfT1Timer Recovery Timer (t1)
Timer for maximum wait for acknowledgment. When timer expires,
timeout recovery is attempted.
Default value is 5.rw INTEGER .1.3.6.1.4.1.230.5.7.4.3.1.13 |
nvLinkconfT2Acknowledgement Timer (t2)
LAPB maximum amount of time before acknowledgement.
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.7.4.3.1.14 |
nvLinkconfT3Link Watchdog Timer (t3)
LAPB maximum amount of link idle time before a probe is done.
Default value is 15.rw INTEGER .1.3.6.1.4.1.230.5.7.4.3.1.15 |
nvLinkconfAckthreshAcknowledgement Threshold (ackthresh)rw INTEGER .1.3.6.1.4.1.230.5.7.4.3.1.16 |
nvLinkconfDialoutdialout command string idrw INTEGER .1.3.6.1.4.1.230.5.7.4.3.1.18 |
nvLinkconfWaitframeNumber of T1 periods to wait for frame upon startup.rw INTEGER .1.3.6.1.4.1.230.5.7.4.3.1.19 |
nevadaX25 OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.10 |
nvX25stat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.10.1 |
nvX25statMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.10.1.1 |
nvX25statNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.10.1.2 |
nvX25statTablex25stat file. SEQUENCE OF NvX25statEntry .1.3.6.1.4.1.230.5.10.1.3 |
nvX25statEntryx25stat record. NvX25statEntry .1.3.6.1.4.1.230.5.10.1.3.1 |
nvX25statIndexIndex of x25stat recordro INTEGER .1.3.6.1.4.1.230.5.10.1.3.1.1 |
nvX25statNetnamex25stat: network interface name.ro DisplayString .1.3.6.1.4.1.230.5.10.1.3.1.2 |
nvX25statCodelast clear or reset code.
Initial status is 1+1.ro Enumeration .1.3.6.1.4.1.230.5.10.1.3.1.3 |
nvX25statDiaglast diagnostic code.
Initial status is 0.ro INTEGER .1.3.6.1.4.1.230.5.10.1.3.1.4 |
nvX25statIfstatenetwork state.
Current state of network interface.
Initial status is 0+1.ro Enumeration .1.3.6.1.4.1.230.5.10.1.3.1.5 |
nvX25statCallcurNumber of X25 calls currently active.ro INTEGER .1.3.6.1.4.1.230.5.10.1.3.1.6 |
nvX25statOpennetwork open?
Initial status is 0+1.ro Enumeration .1.3.6.1.4.1.230.5.10.1.3.1.7 |
nvX25statUpnetwork up?
Initial status is 0+1.ro Enumeration .1.3.6.1.4.1.230.5.10.1.3.1.8 |
nvX25statNtxcallsnumber of call requests sent.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.1.3.1.9 |
nvX25statNrxcallsnumber of call requests received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.1.3.1.10 |
nvX25statNtxcallcsnumber of call confs sent.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.1.3.1.11 |
nvX25statNrxcallcsnumber of call confs received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.1.3.1.12 |
nvX25statNtxclrsnumber of clear requests sent.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.1.3.1.13 |
nvX25statNrxclrsnumber of clear requests received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.1.3.1.14 |
nvX25statNtxclrcsnumber of clear confs sent.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.1.3.1.15 |
nvX25statNrxclrcsnumber of clear confs received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.1.3.1.16 |
nvX25statNtxresnumber of reset requests send.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.1.3.1.17 |
nvX25statNrxresnumber of reset requests received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.1.3.1.18 |
nvX25statNtxintsnumber of int requests send.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.1.3.1.19 |
nvX25statNrxintsnumber of int requests received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.1.3.1.20 |
nvX25statNtxrrsnumber of receiver readys send.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.1.3.1.21 |
nvX25statNrxrrsnumber of receiver readys received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.1.3.1.22 |
nvX25statNtxrnrsnumber of receiver not readys send.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.1.3.1.23 |
nvX25statNrxrnrsnumber of receiver not readys received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.1.3.1.24 |
nvX25statNtxpaksnumber of data packets sent.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.1.3.1.25 |
nvX25statNrxpaksnumber of data packets received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.1.3.1.26 |
nvX25statNtxsegsnumber of data segments sent.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.1.3.1.27 |
nvX25statNrxsegsnumber of data segments received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.1.3.1.28 |
nvX25statNtxcharsnumber of data chars sent.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.1.3.1.29 |
nvX25statNrxcharsnumber of data chars received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.1.3.1.30 |
nvX25statMaxvcmaximum connections.
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.10.1.3.1.31 |
nvX25statDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.10.1.3.1.32 |
nvX25statLinkupLink (level2) uptime in seconds.ro INTEGER .1.3.6.1.4.1.230.5.10.1.3.1.33 |
nvX25call OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.10.2 |
nvX25callMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.10.2.1 |
nvX25callNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.10.2.2 |
nvX25callTablex25call file. SEQUENCE OF NvX25callEntry .1.3.6.1.4.1.230.5.10.2.3 |
nvX25callEntryx25call record. NvX25callEntry .1.3.6.1.4.1.230.5.10.2.3.1 |
nvX25callIndexIndex of x25call recordro INTEGER .1.3.6.1.4.1.230.5.10.2.3.1.1 |
nvX25callNetnamenetwork interface name (as defined in the X25conf record)ro DisplayString .1.3.6.1.4.1.230.5.10.2.3.1.2 |
nvX25callChanstatelogical channel state
Initial status is p1 (0+1).ro Enumeration .1.3.6.1.4.1.230.5.10.2.3.1.3 |
nvX25callChantypelogical channel type
Initial status is 3+1.ro Enumeration .1.3.6.1.4.1.230.5.10.2.3.1.4 |
nvX25callCodelast clear or reset code
Initial status is 1+1.ro Enumeration .1.3.6.1.4.1.230.5.10.2.3.1.5 |
nvX25callDiaglast diagnostic code
Initial status is 0.ro INTEGER .1.3.6.1.4.1.230.5.10.2.3.1.6 |
nvX25callExpacknumber of ACKs expected
This field indicates the number of message acknowlegements
that are expected from the Network User and is used for flow
control within the node.
Initial status is 0.ro INTEGER .1.3.6.1.4.1.230.5.10.2.3.1.7 |
nvX25callLcnlogical channel number assigned to this callro INTEGER .1.3.6.1.4.1.230.5.10.2.3.1.8 |
nvX25callRxpszereceive packet size
This field indicates the largest packet that will be
received across the interface. If flow-control negotiation
is in effect,this is the value that was agreed.
Initial status is 7+1.ro Enumeration .1.3.6.1.4.1.230.5.10.2.3.1.9 |
nvX25callRxwszereceive window
This field indicates the packet-level receive
window size being used.
If flow-control negotiation
is in effect,this is the value that was agreed.
Initial status is 2.ro INTEGER .1.3.6.1.4.1.230.5.10.2.3.1.10 |
nvX25callRxtputreceive throughput class
This field indicates the receive throughtput class that is
being used. If throughput-class negotiation
is in effect,this is the value that was agreed.
Initial status is 7+1.ro Enumeration .1.3.6.1.4.1.230.5.10.2.3.1.11 |
nvX25callNrN(R) state variable
This field indicates the sequence number of the next packet
expected to be received on this logical channel.
Initial status is 0.ro INTEGER .1.3.6.1.4.1.230.5.10.2.3.1.12 |
nvX25callNrunaknext N(R) to acknowlege
This field indicates the sequence number of the packet
that will next be acknowledged as received on this channel.
By delaying acknowledgements of received packets,flow
control of the sender is achieved.
Initial status is 0.ro INTEGER .1.3.6.1.4.1.230.5.10.2.3.1.13 |
nvX25callNsN(S) state variable
This field indicates the sequence number of the next
data packet to be sent on this logical channel.
Initial status is 0.ro INTEGER .1.3.6.1.4.1.230.5.10.2.3.1.14 |
nvX25callNsunakN(S) to be acknowledged
This field indicates the sequence number of the data
packet that
is to be acknowledged next by the receiver.
Initial status is 0.ro INTEGER .1.3.6.1.4.1.230.5.10.2.3.1.15 |
nvX25callNunakpacnumber of unacknowledged data packets transmitted
This field indicates the number of data packets that have been
sent but that are not yet acknowledged by the receiver.
Initial status is 0.ro INTEGER .1.3.6.1.4.1.230.5.10.2.3.1.16 |
nvX25callTxpszetransmit packet size
This field indicates the largest packet that will be
transmitted across the interface. If flow-control negotiation
is in effect,this is the value that was agreed.
Initial status is 7+1.ro Enumeration .1.3.6.1.4.1.230.5.10.2.3.1.17 |
nvX25callTxwszetransmit window
This field indicates the packet-level transmit
window size being used.
If flow-control negotiation
is in effect,this is the value that was agreed.
Initial status is 2.ro INTEGER .1.3.6.1.4.1.230.5.10.2.3.1.18 |
nvX25callTxtputtransmit throughput class
This field indicates the transmit throughtput class that is
being used. If throughput-class negotiation
is in effect,this is the value that was agreed.
Initial status is 7+1.ro Enumeration .1.3.6.1.4.1.230.5.10.2.3.1.19 |
nvX25callNrxintsnumber of INTERRUPTs received
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.2.3.1.20 |
nvX25callNrxpaksnumber of packets received
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.2.3.1.21 |
nvX25callNrxresnumber of RESET REQUESTs received
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.2.3.1.22 |
nvX25callNrxrnrsnumber of RNRs received
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.2.3.1.23 |
nvX25callNrxrrsnumber of RRs received
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.2.3.1.24 |
nvX25callNrxsegsnumber of segments received
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.2.3.1.25 |
nvX25callNtxintsnumber of INTERRUPTs sent
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.2.3.1.26 |
nvX25callNtxpaksnumber of packets sent
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.2.3.1.27 |
nvX25callNtxsegsnumber of segments sent
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.2.3.1.28 |
nvX25callNtxresnumber of RESET REQUESTs sent
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.2.3.1.29 |
nvX25callNtxrrsnumber of RRs sent
.note
RNRs are not transmitted by the X.25 interface component.
.end note
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.10.2.3.1.30 |
nvX25callDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.10.2.3.1.31 |
nvX25conf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.10.3 |
nvX25confMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.10.3.1 |
nvX25confNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.10.3.2 |
nvX25confTablex25conf file. SEQUENCE OF NvX25confEntry .1.3.6.1.4.1.230.5.10.3.3 |
nvX25confEntryx25conf record. NvX25confEntry .1.3.6.1.4.1.230.5.10.3.3.1 |
nvX25confIndexIndex of x25conf recordro INTEGER .1.3.6.1.4.1.230.5.10.3.3.1.1 |
nvX25confNetnameNetwork Interface Name (netname)
This field names an instance of the X.25 network interface.
The name is used to identify the status records belonging to,and commands
destined for,a particular instance of an X.25 network interface.
Parameter is set during factory configuration.ro DisplayString .1.3.6.1.4.1.230.5.10.3.3.1.2 |
nvX25confAppLogical Interface Appearance (app)
This field defines whether the component implements an X.25
interface,or an internal network trunk interface.
In addition,it specifies the appearance of the interface.
Default value is 1+1.rw Enumeration .1.3.6.1.4.1.230.5.10.3.3.1.3 |
nvX25confAutostartAuto X.25 Connection Startup (autostart)
Default value is enable (1+1).rw Enumeration .1.3.6.1.4.1.230.5.10.3.3.1.4 |
nvX25confDlnumberData Link Record (dlnumber)
This field tells which of the DLCONF records in the
SL component should be used by this net.
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.10.3.3.1.5 |
nvX25confLicLowest Incoming SVC (lic)
This field defines the lowest logical channel number (LCN)
that is reserved for incoming calls.
The range of logical channels from LIC to LIC+NIC-1 is
reserved for incoming calls only.
Default value is 1.rw INTEGER .1.3.6.1.4.1.230.5.10.3.3.1.6 |
nvX25confLocLowest Outgoing SVC (loc)
This field defines the lowest logical channel number (LCN)
that is reserved for outgoing calls.
The range of logical channels from LOC to LOC+NOC-1 is
reserved for outgoing calls.
Default value is 1.rw INTEGER .1.3.6.1.4.1.230.5.10.3.3.1.7 |
nvX25confLpcLowest PVC (lpc)
This field describes the lowest logical channel number (LCN)
in the range reserved for permanent virtual circuits (PVCs).
Each of the channels should also be described in the X25PVC
file,although if they are not they will be treated as PVC
'B' ends.
Default value is 1.rw INTEGER .1.3.6.1.4.1.230.5.10.3.3.1.8 |
nvX25confLtcLowest Two-Way SVC (ltc)
This field defines the lowest logical channel number (LCN)
that may be used for both incoming calls and outgoing calls.
The range of logical channels from LTC to LTC+NTC-1 is
available for incoming and outgoing calls.
Default value is 1.rw INTEGER .1.3.6.1.4.1.230.5.10.3.3.1.9 |
nvX25confNicNumber of Incoming SVCs (nic)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.10.3.3.1.10 |
nvX25confNocNumber of Outgoing SVCs (noc)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.10.3.3.1.11 |
nvX25confNpcNumber of PVCs (npc)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.10.3.3.1.12 |
nvX25confNtcNumber of Two-Way SVCs (ntc)
.nfl index
.nfl capitalize
.note
The four ranges
(LPC to LPC+NPC-1; LIC to LIC+NIC-1; LTC to LTC+NTC-1 ;and LOC to LOC+NOC-1)
must not overlap. Futhermore,to avoid channel assignments collisions
between DTEs and DCEs,it is recommended that the ranges be assigned thus:
.br;For DTEs: LIC to LIC+NIC-1 < LTC to LTC+NTC-1 < LOC to LOC+NOC-1
.br;For DCEs: LIC to LIC+NIC-1 > LTC to LTC+NTC-1 > LOC to LOC+NOC-1
.end note
.fl index
.fl capitalize
Default value is 28.rw INTEGER .1.3.6.1.4.1.230.5.10.3.3.1.13 |
nvX25confAcktimerPacket Acknowledgement Timer (acktimer)
defines if t2 procedure is going to be used or not,and
if it is going to be used what t2 time period will be in
one tenths of a second. When t2 is zero,procedure to
delay acknowledgement will not be performed.
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.10.3.3.1.14 |
nvX25confAckthreshAcknowledgement Threshold (ackthresh)
acknowledgement threshold is used to acknowledge received
data when certain number of data packets received,even if
t2 timer has not expired. It is used only if t2 procedure
is active,ie acktime is greater than zero.
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.10.3.3.1.15 |
nvX25confNuireqNUI requiredrw Enumeration .1.3.6.1.4.1.230.5.10.3.3.1.16 |
nvX25confCugformatClosed User Group Format (cugformat)
This field indicates the format of closed user groups to which
this interface subscribes. If the type is basic,the
two digit format of the CUG facility request is used. If
the type is extend the four digit format is used.
Default value is basic (0+1).rw Enumeration .1.3.6.1.4.1.230.5.10.3.3.1.17 |
nvX25confDbmodD-Bit Modification (dbmod)
This field enables d bit modification,where all data packets
received from the link are assumed to have their delivery
confirmation bit set,and all data packets transmitted have
it reset. This is only present to cater to older network
implementations that do not support delivery confirmation.
Default value is 0.rw Enumeration .1.3.6.1.4.1.230.5.10.3.3.1.18 |
nvX25confDefpszeDefault Packet Size (defpsze)
This value sets the maximum packet size that can be
transferred across the interface if packet size negotiation
is disabled (flowneg = no/wsz) or is not requested.
If flow control parameter negotiation is enabled
(flowneg = yes/psz),
this value is used as a starting point and may be negotiated,
with the network,
up to the value of maxpsze or down to the minimum value of 16.
Values for packet size requested by components (eg ITI)
are preferentially used if flow
control negotiation is enabled (flowneg = yes/psz) AND if the
requested values are between maxpsze and 16; in all other
cases defpsze is used.
Default value is 7+1.rw Enumeration .1.3.6.1.4.1.230.5.10.3.3.1.19 |
nvX25confDefwszeDefault Window Size (defwsze)
This field sets the default value for the packet-level
window size to be used
when transferring packets if flow-control negotiation is
disabled (flowneg = no/psz) or is not requested.
If flow control parameter
negotiation is enabled (flowneg=yes/wsz) then this value is
used as a starting point and may be negotiated up to the
maximum value set by maxwsze or down to a minimum value of 1.
If this field is set to a value greater than 7,the
interface must be configured for extended packet numbering
(xtend = yes).
Values for window size requested by components (eg ITI)
are preferentially used if flow
control negotiation is enabled (flowneg = yes/wsz) AND if the
requested values are between maxwsze and 1; in all other
cases defwsze is used.
Default value is 2.rw INTEGER .1.3.6.1.4.1.230.5.10.3.3.1.20 |
nvX25confDeftputDefault Throughput Class (deftput)
This field sets the initial value to be used for the
throughput class for the virtual call if throughput-class
negotiation is disabled (thruneg = no) or is not requested.
If throughput-class negotiation is enabled (thruneg = yes),
this value is used as a starting point and may be negotiated,
with the network,downwards.
Values for throughputclass negotiation
requested by components (eg ITI)
are preferentially used if throughput-class
negotiation is enabled (thruneg = yes) AND if the
requested values are less than deftput; in all other
cases deftput is used.
.note;Although CCITT defines throughput classes in terms of
a guaranteed data-rate,throughput classes are only
implemented to the extent of arranging that packets of a
higher throughput-class are serviced before those of a lower
class.
.end note
Default value is 10+1.rw Enumeration .1.3.6.1.4.1.230.5.10.3.3.1.21 |
nvX25confDiagsuprDiagnostic Packet Suppression (diagsupr)
This field suppresses or enables the emission of DIAG
diagnostic packets on some network protocol violations.
Default value is no (0+1).rw Enumeration .1.3.6.1.4.1.230.5.10.3.3.1.22 |
nvX25confDirectionCall Direction Allowed (direction)
This field indicates whether incoming and outgoing calls may be
made over this interface.
Default value is 3+1.rw Enumeration .1.3.6.1.4.1.230.5.10.3.3.1.23 |
nvX25confFlownegFlow Control Negotiation (flowneg)
This field enables or disables negotiation of the flow control
parameters,window size and packet size.
Default value is no (0+1).rw Enumeration .1.3.6.1.4.1.230.5.10.3.3.1.24 |
nvX25confFstaccFast Select Acceptance (fstacc)
This field defines whether fast-select call requests
are accepted.
Default value is no (0+1).rw Enumeration .1.3.6.1.4.1.230.5.10.3.3.1.25 |
nvX25confUpdncmdLink Up/Down Command
This field is the string id of a script like command that
may bring other links up or down when this link goes up or
down
format: netup-cmds>netdown-cmds
netup-cmds: >netx.up/down...
netdown-cmds: netx.up/down...
example: >netw.up>netx.down>>nety.up>netz.down
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.10.3.3.1.26 |
nvX25confMaxpszeMaximum Packet Size (maxpsze)
This value is the maximum acceptable value for the
largest packet that can be sent across the interface.
It is used as an upper-bound in packet size negotiation.
Default value is 7+1.rw Enumeration .1.3.6.1.4.1.230.5.10.3.3.1.27 |
nvX25confMaxwszeMaximum Window Size (maxwsze)
This field sets the maximum acceptable value for the
packet-level window size to be used
when transferring packets. It is used as a upper-bound
in window size negotiation.
If this field is set to a value greater than 7,the
interface must be configured for extended packet numbering
(xtend = yes).
Default value is 2.rw INTEGER .1.3.6.1.4.1.230.5.10.3.3.1.28 |
nvX25confNetaddrCalling Network Address (netaddr)
If this field is not empty,the contents will be supplied as
the calling network address in all call request packets
transmitted,overriding anything supplied by the network user.rw DisplayString .1.3.6.1.4.1.230.5.10.3.3.1.29 |
nvX25confNettypeX.25 Network Type (nettype)
This field indicates the local variety of X.25 network and
is primarily used to show how to interpret non-X.25 facilities
of the local network.If nettype = unknown,non-X.25
facilities are passed transparently through a switch
and ignored by a PAD.
Default value is ccitt (0+1).rw Enumeration .1.3.6.1.4.1.230.5.10.3.3.1.30 |
nvX25confNetvrsionNetwork Version (netvrsion)
This field indicates which version of the X.25 recommendation
to which the network interface should adhere.
Default value is 80.rw Enumeration .1.3.6.1.4.1.230.5.10.3.3.1.31 |
nvX25confPktbufPacket Buffer for Unbalance Window
For unbalanced window enhancement,FRR will be generated
when the number of unacknowledged transmitted packets reaches
the value of the PKTBUF field.
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.10.3.3.1.32 |
nvX25confStndbytimStandby Timer (stndbytim)
How many seconds the box will wait before dropping
dialout connection when there is no vc connected.
Default value is 30.rw INTEGER .1.3.6.1.4.1.230.5.10.3.3.1.33 |
nvX25confRevaccReverse Charging Acceptance (revacc)
In an X.25 DTE configuration,this field defines whether
an incoming call indicating reverse charging is passed up to
the Network Bus or rejected immediately.
In an X.25 DCE configuration,it indicates whether a reverse
charging call to the DTE should be passed through or cleared.
In X.75 configurations this field has no significance.
Default value is yes (1+1).rw Enumeration .1.3.6.1.4.1.230.5.10.3.3.1.34 |
nvX25confThrunegThroughput Class Negotiation (thruneg)
This field enables or disables negotiation of throughput classes.
Default value is (0+1).rw Enumeration .1.3.6.1.4.1.230.5.10.3.3.1.35 |
nvX25confTx0Restart Request Timer (tx0)
This field defines the value,in seconds,for
restart indication timer#(T10 - DCE appearance)
restart request timer####(T20 - DTE appearance)
Recommended values are:
T10 - 60s
T20 - 180s
Default value is 180.rw INTEGER .1.3.6.1.4.1.230.5.10.3.3.1.36 |
nvX25confTx1Call Request Timer (tx1)
This field defines the value,in seconds,for
- incoming call timer######(T11 - DCE appearance)
- call request timer#######(T21 - DTE appearance)
Recommended values are:
T11 - 180s
T21 - 200s
Default value is 200.rw INTEGER .1.3.6.1.4.1.230.5.10.3.3.1.37 |
nvX25confTx2Reset Request Timer (tx2)
This field defines the value,in seconds,for
- reset indication timer###(T12 - DCE appearance)
- reset request timer######(T22 - DTE appearance)
Recommended values are:
T12 - 60s
T22 - 180s
Default value is 180.rw INTEGER .1.3.6.1.4.1.230.5.10.3.3.1.38 |
nvX25confTx3Clear Request Timer (tx3)
This field defines the value,in seconds,for
- clear indication timer###(T13 - DCE appearance)
- clear request timer######(T23 - DTE appearance)
Recommended values are:
T13 - 60s
T23 - 180s
Default value is 180.rw INTEGER .1.3.6.1.4.1.230.5.10.3.3.1.39 |
nvX25confXtendExtended Packet Numbering (xtend)
This field allows the extended packet
sequencing format (modulo 128) to be used.
If this option is not selected,packet sequencing is
modulo 8.
Default value is no (0+1).rw Enumeration .1.3.6.1.4.1.230.5.10.3.3.1.40 |
nvX25confNuirtgIf this field is set to yes,route is based on NUI using x25nuimap entries.rw Enumeration .1.3.6.1.4.1.230.5.10.3.3.1.42 |
nvX25confIsdnaddrGet calling address from ISDN?
Default value is no (0+1).rw Enumeration .1.3.6.1.4.1.230.5.10.3.3.1.43 |
nvX25nuimap OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.10.4 |
nvX25nuimapMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.10.4.1 |
nvX25nuimapNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.10.4.2 |
nvX25nuimapTablex25nuimap file. SEQUENCE OF NvX25nuimapEntry .1.3.6.1.4.1.230.5.10.4.3 |
nvX25nuimapEntryx25nuimap record. NvX25nuimapEntry .1.3.6.1.4.1.230.5.10.4.3.1 |
nvX25nuimapIndexIndex of x25nuimap recordro INTEGER .1.3.6.1.4.1.230.5.10.4.3.1.1 |
nvX25nuimapNuiNUI value to matchrw DisplayString .1.3.6.1.4.1.230.5.10.4.3.1.2 |
nvX25nuimapCalledCalled Network Addressrw DisplayString .1.3.6.1.4.1.230.5.10.4.3.1.3 |
nvX25nuimapStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.10.4.3.1.4 |
nvXbillconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.10.5 |
nvXbillconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.10.5.1 |
nvXbillconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.10.5.2 |
nvXbillconfTablexbillconf file. SEQUENCE OF NvXbillconfEntry .1.3.6.1.4.1.230.5.10.5.3 |
nvXbillconfEntryxbillconf record, indexed by record number NvXbillconfEntry .1.3.6.1.4.1.230.5.10.5.3.1 |
nvXbillconfIndexIndex of xbillconf record.ro INTEGER .1.3.6.1.4.1.230.5.10.5.3.1.1 |
nvXbillconfEnableEnable/Disable xbillstat accounting.rw Enumeration .1.3.6.1.4.1.230.5.10.5.3.1.2 |
nvXbillconfSegsizeSegment size.rw INTEGER .1.3.6.1.4.1.230.5.10.5.3.1.3 |
nvXbillconfBilltimeTime xbillstat records will remain open for.rw INTEGER .1.3.6.1.4.1.230.5.10.5.3.1.4 |
nvXnuaset OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.10.6 |
nvXnuasetMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.10.6.1 |
nvXnuasetNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.10.6.2 |
nvXnuasetTablexnuaset file. SEQUENCE OF NvXnuasetEntry .1.3.6.1.4.1.230.5.10.6.3 |
nvXnuasetEntryxnuaset record, indexed by record number NvXnuasetEntry .1.3.6.1.4.1.230.5.10.6.3.1 |
nvXnuasetIndexIndex of xnuaset record.ro INTEGER .1.3.6.1.4.1.230.5.10.6.3.1.1 |
nvXnuasetSetnameNuaset namerw DisplayString .1.3.6.1.4.1.230.5.10.6.3.1.2 |
nvXnuasetNua1Nua1.rw DisplayString .1.3.6.1.4.1.230.5.10.6.3.1.3 |
nvXnuasetNua2Nua2.rw DisplayString .1.3.6.1.4.1.230.5.10.6.3.1.4 |
nvXnuasetNua3Nua3.rw DisplayString .1.3.6.1.4.1.230.5.10.6.3.1.5 |
nvXnuasetStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.10.6.3.1.10 |
nvXbillstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.10.7 |
nvXbillstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.10.7.1 |
nvXbillstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.10.7.2 |
nvXbillstatTablexbillstat file. SEQUENCE OF NvXbillstatEntry .1.3.6.1.4.1.230.5.10.7.3 |
nvXbillstatEntryxbillstat record, indexed by record number NvXbillstatEntry .1.3.6.1.4.1.230.5.10.7.3.1 |
nvXbillstatIndexIndex of xbillstat record.ro INTEGER .1.3.6.1.4.1.230.5.10.7.3.1.1 |
nvXbillstatNodeidNode Identifierro INTEGER .1.3.6.1.4.1.230.5.10.7.3.1.2 |
nvXbillstatDateDate of Record Generation.ro DisplayString .1.3.6.1.4.1.230.5.10.7.3.1.3 |
nvXbillstatTimeTime of Record Generation.ro DisplayString .1.3.6.1.4.1.230.5.10.7.3.1.4 |
nvXbillstatNuasetNuaset used to generate this record.ro DisplayString .1.3.6.1.4.1.230.5.10.7.3.1.5 |
nvXbillstatDatarateISDN speedro DisplayString .1.3.6.1.4.1.230.5.10.7.3.1.6 |
nvXbillstatTxsegNumber of transmitted X.25 segments.ro Counter .1.3.6.1.4.1.230.5.10.7.3.1.7 |
nvXbillstatRxsegNumber of received X.25 segments.ro Counter .1.3.6.1.4.1.230.5.10.7.3.1.8 |
nvXbillstatRxcallcNumber of X.25 Calls Accepted by the Host.ro Counter .1.3.6.1.4.1.230.5.10.7.3.1.9 |
nvXbillstatHostclrNumber of X.25 Calls Cleared by the Host.ro Counter .1.3.6.1.4.1.230.5.10.7.3.1.10 |
nvXbillstatNetclrNumber of X.25 Calls Cleared by the Network.ro Counter .1.3.6.1.4.1.230.5.10.7.3.1.11 |
nvXbillstatTxpakNumber of Transmitted X.25 packets.ro Counter .1.3.6.1.4.1.230.5.10.7.3.1.12 |
nvXbillstatRxpakNumber of X.25 packets received.ro Counter .1.3.6.1.4.1.230.5.10.7.3.1.13 |
nvXbillstatLess5Number of ISDN calls less that 5 secs.ro Counter .1.3.6.1.4.1.230.5.10.7.3.1.14 |
nvXbillstat5to10Number of ISDN calls from 5 to 10 secs.ro Counter .1.3.6.1.4.1.230.5.10.7.3.1.15 |
nvXbillstat10to15Number of ISDN calls from 10 to 15 secs.ro Counter .1.3.6.1.4.1.230.5.10.7.3.1.16 |
nvXbillstat15to20Number of ISDN calls from 15 to 20 secs.ro Counter .1.3.6.1.4.1.230.5.10.7.3.1.17 |
nvXbillstatGrtr20Number of ISDN calls greater than 20 secs.ro Counter .1.3.6.1.4.1.230.5.10.7.3.1.18 |
nvXbillstatClosedRecord open or closed.ro Enumeration .1.3.6.1.4.1.230.5.10.7.3.1.19 |
nevadaIsdn OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.11 |
nvPriconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.11.1 |
nvPriconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.11.1.1 |
nvPriconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.11.1.2 |
nvPriconfTablepriconf file. SEQUENCE OF NvPriconfEntry .1.3.6.1.4.1.230.5.11.1.3 |
nvPriconfEntrypriconf record, indexed by record number NvPriconfEntry .1.3.6.1.4.1.230.5.11.1.3.1 |
nvPriconfIndexIndex of priconf record.ro INTEGER .1.3.6.1.4.1.230.5.11.1.3.1.1 |
nvPriconfPrinamePRI name.ro Enumeration .1.3.6.1.4.1.230.5.11.1.3.1.2 |
nvPriconfSwitchSwitch type.rw Enumeration .1.3.6.1.4.1.230.5.11.1.3.1.3 |
nvPriconfDsltypeDSL type.rw Enumeration .1.3.6.1.4.1.230.5.11.1.3.1.4 |
nvPriconfRoutingRouting address.rw Enumeration .1.3.6.1.4.1.230.5.11.1.3.1.5 |
nvPriconfDlinameDLI name.rw DisplayString .1.3.6.1.4.1.230.5.11.1.3.1.6 |
nvPriconfRsrcpoolB channel pool name.rw DisplayString .1.3.6.1.4.1.230.5.11.1.3.1.7 |
nvPriconfStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.11.1.3.1.9 |
nvPriconfBusyoutspecifies whether new calls should be rejected.rw Enumeration .1.3.6.1.4.1.230.5.11.1.3.1.10 |
nvPriconfEstlinkAdded T1/E1 L1/L2 recoveryrw Enumeration .1.3.6.1.4.1.230.5.11.1.3.1.11 |
nvPriconfDlirstAdded T1/E1 L1/L2 recoveryrw Enumeration .1.3.6.1.4.1.230.5.11.1.3.1.12 |
nvPriconfDchrstAdded T1/E1 L1/L2 recoveryrw Enumeration .1.3.6.1.4.1.230.5.11.1.3.1.13 |
nvPriconfNfasdchNFAS type primary or backup
1- No NFAS interface configured
2- Primary NFAS interface
3- Secondary NFAS interfacerw Enumeration .1.3.6.1.4.1.230.5.11.1.3.1.14 |
nvPriconfNfasifNFAS Interface numbersrw INTEGER .1.3.6.1.4.1.230.5.11.1.3.1.15 |
nvPriconfNfasgrpNFAS group numbersrw INTEGER .1.3.6.1.4.1.230.5.11.1.3.1.16 |
nvPriconfTsshiftRun T1 timeslot format on E1 linesrw Enumeration .1.3.6.1.4.1.230.5.11.1.3.1.17 |
nvPriconfX25diagsString defining X.25 diagnostic lookup tablerw INTEGER .1.3.6.1.4.1.230.5.11.1.3.1.18 |
nvPriconfNumbtypeType of Number.rw Enumeration .1.3.6.1.4.1.230.5.11.1.3.1.19 |
nvPriconfNumbplanNumbering plan.rw Enumeration .1.3.6.1.4.1.230.5.11.1.3.1.20 |
nvPriconfModemcapSpeech or audio(3.1 or 7 kHz).rw Enumeration .1.3.6.1.4.1.230.5.11.1.3.1.21 |
nvPriconfL1protL1 protocol enabled.rw Enumeration .1.3.6.1.4.1.230.5.11.1.3.1.22 |
nvPriconfStandbystandby enabled.rw Enumeration .1.3.6.1.4.1.230.5.11.1.3.1.23 |
nvPristat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.11.2 |
nvPristatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.11.2.1 |
nvPristatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.11.2.2 |
nvPristatTablepristat file. SEQUENCE OF NvPristatEntry .1.3.6.1.4.1.230.5.11.2.3 |
nvPristatEntrypristat record, indexed by record number NvPristatEntry .1.3.6.1.4.1.230.5.11.2.3.1 |
nvPristatIndexIndex of pristat record.ro INTEGER .1.3.6.1.4.1.230.5.11.2.3.1.1 |
nvPristatPrinamePRI name.ro Enumeration .1.3.6.1.4.1.230.5.11.2.3.1.2 |
nvPristatStatusinterface status.ro Enumeration .1.3.6.1.4.1.230.5.11.2.3.1.3 |
nvPristatCallrecvsnumber of calls received.ro Counter .1.3.6.1.4.1.230.5.11.2.3.1.4 |
nvPristatCallacepsnumber of incoming connections.ro Counter .1.3.6.1.4.1.230.5.11.2.3.1.5 |
nvPristatCallrejsnumber of incoming calls rejected.ro Counter .1.3.6.1.4.1.230.5.11.2.3.1.6 |
nvPristatCallinrelsnumber of inside released connections.ro Counter .1.3.6.1.4.1.230.5.11.2.3.1.7 |
nvPristatCalloutrelsnumber of outside released connections.ro Counter .1.3.6.1.4.1.230.5.11.2.3.1.8 |
nvPristatEstreqNumber of established requests.ro Counter --AF .1.3.6.1.4.1.230.5.11.2.3.1.9 |
nvPristatDlirstNumber of dli chip resets.ro Counter --AF .1.3.6.1.4.1.230.5.11.2.3.1.10 |
nvPristatDchrstNumber of d-channel resets.ro Counter --AF .1.3.6.1.4.1.230.5.11.2.3.1.11 |
nvPristatCallcurNumber of current calls.ro Counter --AF .1.3.6.1.4.1.230.5.11.2.3.1.12 |
nvPristatDchanupNumber in seconds d channel comes up.ro Counter --AF .1.3.6.1.4.1.230.5.11.2.3.1.13 |
nvPristatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.11.2.3.1.14 |
nvPristatNcurincomCurrent Number of simulataneous incoming calls.ro Counter .1.3.6.1.4.1.230.5.11.2.3.1.15 |
nvPristatNcuroutgoCurrent Number of simulataneous outgoing calls.ro Counter .1.3.6.1.4.1.230.5.11.2.3.1.16 |
nvPristatNrxsetupNumber of SETUP messages received.ro Counter .1.3.6.1.4.1.230.5.11.2.3.1.17 |
nvPristatMaxrsetupMax number of outstanding SETUP messages for dial-in.ro Counter .1.3.6.1.4.1.230.5.11.2.3.1.18 |
nvPristatNrxsetupaNumber of aborted rx SETUP messages.ro Counter .1.3.6.1.4.1.230.5.11.2.3.1.19 |
nvPristatNtxconnNumber of CONNECT messages set for dial-in.ro Counter .1.3.6.1.4.1.230.5.11.2.3.1.20 |
nvPristatNtxbusyNumber of dial-in fail due to busy.ro Counter .1.3.6.1.4.1.230.5.11.2.3.1.21 |
nvPristatNtxsetupNumber of SEUTP messages sent for dial-out.ro Counter .1.3.6.1.4.1.230.5.11.2.3.1.22 |
nvPristatMaxtsetupMax number of outstanding tx SETUP messages.ro Counter .1.3.6.1.4.1.230.5.11.2.3.1.23 |
nvPristatNtxsetupaNumber of aborted tx SETUP messages.ro Counter .1.3.6.1.4.1.230.5.11.2.3.1.24 |
nvPristatNrxconnNumber of CONNECT recieved for dial-in.ro Counter .1.3.6.1.4.1.230.5.11.2.3.1.25 |
nvPristatNrxbusyNumber of dial-out fails due to busy.ro Counter .1.3.6.1.4.1.230.5.11.2.3.1.26 |
nvPristatNnoanswerNumber of fail no answer for dialout.ro Counter .1.3.6.1.4.1.230.5.11.2.3.1.27 |
nvPristatMaxincomMaximum number of simultaneous incoming calls.ro Counter .1.3.6.1.4.1.230.5.11.2.3.1.28 |
nvPristatMaxoutgoMaximum number of simultaneous outgoing calls.ro Counter .1.3.6.1.4.1.230.5.11.2.3.1.29 |
nvPristatCallsentNumber of outgoing calls sent.ro Counter .1.3.6.1.4.1.230.5.11.2.3.1.30 |
nvPristatCallconnNumber of outgoing calls connected.ro Counter .1.3.6.1.4.1.230.5.11.2.3.1.31 |
nvPristatCallfailNumber of outgoing calls failed.ro Counter .1.3.6.1.4.1.230.5.11.2.3.1.32 |
nvPricstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.11.3 |
nvPricstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.11.3.1 |
nvPricstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.11.3.2 |
nvPricstatTablepricstat file. SEQUENCE OF NvPricstatEntry .1.3.6.1.4.1.230.5.11.3.3 |
nvPricstatEntrypricstat record, indexed by record number NvPricstatEntry .1.3.6.1.4.1.230.5.11.3.3.1 |
nvPricstatIndexIndex of pricstat record.ro INTEGER .1.3.6.1.4.1.230.5.11.3.3.1.1 |
nvPricstatSeqnosequence number.ro INTEGER .1.3.6.1.4.1.230.5.11.3.3.1.2 |
nvPricstatCallidCall ID number.ro DisplayString .1.3.6.1.4.1.230.5.11.3.3.1.3 |
nvPricstatRatedata rate used.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.230.5.11.3.3.1.4 |
nvPricstatStatechannel state.ro Enumeration .1.3.6.1.4.1.230.5.11.3.3.1.5 |
nvPricstatPrinamePRI interface name.ro Enumeration .1.3.6.1.4.1.230.5.11.3.3.1.6 |
nvPricstatCalldircall direction.ro Enumeration .1.3.6.1.4.1.230.5.11.3.3.1.7 |
nvPricstatContypeconnectuon type.ro Enumeration .1.3.6.1.4.1.230.5.11.3.3.1.8 |
nvPricstatL1protlayer 1 protocol.ro Enumeration .1.3.6.1.4.1.230.5.11.3.3.1.9 |
nvPricstatCallingnoCalling number.ro DisplayString .1.3.6.1.4.1.230.5.11.3.3.1.10 |
nvPricstatCallednoCalled number.ro DisplayString .1.3.6.1.4.1.230.5.11.3.3.1.11 |
nvPricstatBchanlB channel used.ro DisplayString .1.3.6.1.4.1.230.5.11.3.3.1.12 |
nvPridstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.11.4 |
nvPridstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.11.4.1 |
nvPridstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.11.4.2 |
nvPridstatTablepridstat file. SEQUENCE OF NvPridstatEntry .1.3.6.1.4.1.230.5.11.4.3 |
nvPridstatEntrypridstat record, indexed by record number NvPridstatEntry .1.3.6.1.4.1.230.5.11.4.3.1 |
nvPridstatIndexIndex of pridstat record.ro INTEGER .1.3.6.1.4.1.230.5.11.4.3.1.1 |
nvPridstatPrinamePRI interface name.ro Enumeration .1.3.6.1.4.1.230.5.11.4.3.1.2 |
nvPridstatEventnoevent number.ro Enumeration .1.3.6.1.4.1.230.5.11.4.3.1.3 |
nvPridstatProtlayerlayer where event occurred.ro Enumeration .1.3.6.1.4.1.230.5.11.4.3.1.4 |
nvPridstatTimetime when event occurred.ro INTEGER .1.3.6.1.4.1.230.5.11.4.3.1.5 |
nvPridstatDatedate where event occurred.ro INTEGER .1.3.6.1.4.1.230.5.11.4.3.1.6 |
nvPricuconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.11.5 |
nvPricuconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.11.5.1 |
nvPricuconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.11.5.2 |
nvPricuconfTablepricuconf file. SEQUENCE OF NvPricuconfEntry .1.3.6.1.4.1.230.5.11.5.3 |
nvPricuconfEntrypricuconf record, indexed by record number NvPricuconfEntry .1.3.6.1.4.1.230.5.11.5.3.1 |
nvPricuconfIndexIndex of pricuconf record.ro INTEGER .1.3.6.1.4.1.230.5.11.5.3.1.1 |
nvPricuconfThresh1Threshold.rw INTEGER .1.3.6.1.4.1.230.5.11.5.3.1.2 |
nvPricuconfThresh2Threshold.rw INTEGER .1.3.6.1.4.1.230.5.11.5.3.1.3 |
nvPricuconfThresh3Threshold.rw INTEGER .1.3.6.1.4.1.230.5.11.5.3.1.4 |
nvPricuconfThresh4Threshold.rw INTEGER .1.3.6.1.4.1.230.5.11.5.3.1.5 |
nvPricuconfIntervalTime period.rw INTEGER .1.3.6.1.4.1.230.5.11.5.3.1.6 |
nvPricuconfStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.11.5.3.1.7 |
nvPricustat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.11.6 |
nvPricustatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.11.6.1 |
nvPricustatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.11.6.2 |
nvPricustatTablepricustat file. SEQUENCE OF NvPricustatEntry .1.3.6.1.4.1.230.5.11.6.3 |
nvPricustatEntrypricustat record, indexed by record number NvPricustatEntry .1.3.6.1.4.1.230.5.11.6.3.1 |
nvPricustatIndexIndex of pricustat record.ro INTEGER .1.3.6.1.4.1.230.5.11.6.3.1.1 |
nvPricustatThresh1Number of calls received.ro INTEGER .1.3.6.1.4.1.230.5.11.6.3.1.2 |
nvPricustatCounter1Number of calls received.ro INTEGER .1.3.6.1.4.1.230.5.11.6.3.1.3 |
nvPricustatThresh2Number of incoming connections.ro INTEGER .1.3.6.1.4.1.230.5.11.6.3.1.4 |
nvPricustatCounter2Number of incoming connections.ro INTEGER .1.3.6.1.4.1.230.5.11.6.3.1.5 |
nvPricustatThresh3Number of incoming calls rejected.ro INTEGER .1.3.6.1.4.1.230.5.11.6.3.1.6 |
nvPricustatCounter3Number of incoming calls rejected.ro INTEGER .1.3.6.1.4.1.230.5.11.6.3.1.7 |
nvPricustatThresh4Number of inside released connections.ro INTEGER .1.3.6.1.4.1.230.5.11.6.3.1.8 |
nvPricustatCounter4Number of inside released connections.ro INTEGER .1.3.6.1.4.1.230.5.11.6.3.1.9 |
nvPricustatResettimeCalling number.ro DisplayString .1.3.6.1.4.1.230.5.11.6.3.1.10 |
nevadaPpp OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.12 |
nvPppstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.12.1 |
nvPppstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.12.1.1 |
nvPppstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.12.1.2 |
nvPppstatTablepppstat file. SEQUENCE OF NvPppstatEntry .1.3.6.1.4.1.230.5.12.1.3 |
nvPppstatEntrypppstat record. NvPppstatEntry .1.3.6.1.4.1.230.5.12.1.3.1 |
nvPppstatIndexIndex of pppstat recordro INTEGER .1.3.6.1.4.1.230.5.12.1.3.1.1 |
nvPppstatNamestatistics Name (name)
statistics name and number (ie,'ps1')ro DisplayString .1.3.6.1.4.1.230.5.12.1.3.1.2 |
nvPppstatPppAdminSppp admin status (pppAdminS)
lcp link Admin Status down/up.ro Enumeration .1.3.6.1.4.1.230.5.12.1.3.1.3 |
nvPppstatLcpOperSlcp operation status (lcpOperS)
lcp link Admin Status down/up.ro Enumeration .1.3.6.1.4.1.230.5.12.1.3.1.4 |
nvPppstatIpcpOperSipcp operation status (ipcpOperS)
ipcp link status down/up.ro Enumeration .1.3.6.1.4.1.230.5.12.1.3.1.5 |
nvPppstatInOctetsOctets received (InOctets)
The number of good data bytes received
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.1.3.1.6 |
nvPppstatInPktsgood packets received (InPkts)
The number of good received frames
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.1.3.1.7 |
nvPppstatInDiscarddiscarded good packets (InDiscard)
The total number of good frames dicarded due to lack of buffers
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.1.3.1.8 |
nvPppstatInErrorBad packets received (InError)
The total number of frames received due to crc,format etc.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.1.3.1.9 |
nvPppstatInEchreceived echo requests (InEch)
The number of echo request packets recieved.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.1.3.1.10 |
nvPppstatInEchRpecho reply received (InEchRp)
The num of packets Rxed due to the echo-req sent (software loopback)
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.1.3.1.11 |
nvPppstatInDiscRqdiscard requests Rxed (InDiscRq)
The number of discard request packets received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.1.3.1.12 |
nvPppstatUnKnwnPrrxed Unknown protocol (UnKnwnPr)
The number of link quality reports received on this PPP link
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.1.3.1.13 |
nvPppstatOutOctetsOctets transmitted (OutOctets)
The number of bytes transmitted on the ppp link.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.1.3.1.14 |
nvPppstatOutPktsPackets transmitted (OutPkts)
The number of pakets transmitted on the PPP link.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.1.3.1.15 |
nvPppstatOutDiscrdoutput errors (OutDiscrd)
The number of outbound pkts droped due to lack of buffers.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.1.3.1.16 |
nvPppstatOutErrorsoutput errors (OutErrors)
The number of outbound pkts could not be txed due to errors.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.1.3.1.17 |
nvPppstatOutEchecho request pkts transmitted (OutEch)
The number of lcp echo request packets transmitted
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.1.3.1.18 |
nvPppstatOutEchRpecho reply transmitted (OutEchRp)
The num of echo reply packets Txed due to the echo-req
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.1.3.1.19 |
nvPppstatOutDiscRqdiscard requests Txed (OutDiscRq)
The number of discard request packets received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.1.3.1.20 |
nvPppstatUserNameauthenticated username of remote user (username).ro DisplayString .1.3.6.1.4.1.230.5.12.1.3.1.21 |
nvPppstatIpAddrIP address in use on this PPP link (ipaddr).ro DisplayString .1.3.6.1.4.1.230.5.12.1.3.1.22 |
nvPppstatBundleIdBundle identifier (mpstat record id) of multilink PPP
bundle in which this link is being used if nvPppstatMultilink is
yes (bundleid).ro INTEGER .1.3.6.1.4.1.230.5.12.1.3.1.23 |
nvPppstatIpcpipcp record number used for this link.ro INTEGER .1.3.6.1.4.1.230.5.12.1.3.1.24 |
nvPppstatMultilinkSet to yes if this LCP is in use in a multilink bundle.ro Enumeration .1.3.6.1.4.1.230.5.12.1.3.1.25 |
nvPppstatCcpOperSccp Operation status.ro Enumeration .1.3.6.1.4.1.230.5.12.1.3.1.26 |
nvPppstatComprotCompression protocol in use.rw Enumeration .1.3.6.1.4.1.230.5.12.1.3.1.27 |
nvPppstatTnnlStateState of a tunneled session.ro Enumeration .1.3.6.1.4.1.230.5.12.1.3.1.28 |
nvPppstatTnnlIdTunnel ID assosiated with the tunneled session.ro INTEGER --AF .1.3.6.1.4.1.230.5.12.1.3.1.29 |
nvPppstatCallIdCall ID assosiated with the tunneled session.ro INTEGER --AF .1.3.6.1.4.1.230.5.12.1.3.1.30 |
nvPppstatOutCmPcntPercent compression on tx.ro Counter --AF .1.3.6.1.4.1.230.5.12.1.3.1.31 |
nvPppstatInCmPcntPercent compression on rx.ro Counter --AF .1.3.6.1.4.1.230.5.12.1.3.1.32 |
nvPppstatOutExpndsNumber of packets expanded by compression.ro Counter --AF .1.3.6.1.4.1.230.5.12.1.3.1.33 |
nvPppstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.12.1.3.1.34 |
nvPppstatRealmFirst 64 characters of the realm if parsing NAI.ro DisplayString .1.3.6.1.4.1.230.5.12.1.3.1.35 |
nvLcpconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.12.2 |
nvLcpconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.12.2.1 |
nvLcpconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.12.2.2 |
nvLcpconfTablelcpconf file. SEQUENCE OF NvLcpconfEntry .1.3.6.1.4.1.230.5.12.2.3 |
nvLcpconfEntrylcpconf record. NvLcpconfEntry .1.3.6.1.4.1.230.5.12.2.3.1 |
nvLcpconfIndexIndex of lcpconf recordro INTEGER .1.3.6.1.4.1.230.5.12.2.3.1.1 |
nvLcpconfPortLink Name (port).rw DisplayString .1.3.6.1.4.1.230.5.12.2.3.1.2 |
nvLcpconfRsrcpoolResource Poolname.rw DisplayString .1.3.6.1.4.1.230.5.12.2.3.1.3 |
nvLcpconfItiudataiti user data (itiudata)rw DisplayString .1.3.6.1.4.1.230.5.12.2.3.1.4 |
nvLcpconfAccmAsync. Control Char Map (accm)rw DisplayString .1.3.6.1.4.1.230.5.12.2.3.1.5 |
nvLcpconfModeinterface type (mode)
Default value is psync (0+1).rw Enumeration .1.3.6.1.4.1.230.5.12.2.3.1.6 |
nvLcpconfPfcprotocol field compression (pfc)
Default value is yes (1+1).rw Enumeration .1.3.6.1.4.1.230.5.12.2.3.1.7 |
nvLcpconfAcfcaddr. ctrl fields comp. (acfc)
Default value is yes (1+1).rw Enumeration .1.3.6.1.4.1.230.5.12.2.3.1.8 |
nvLcpconfRestartimlcp reqests restart (restartim)
Default value is 3.rw INTEGER .1.3.6.1.4.1.230.5.12.2.3.1.9 |
nvLcpconfMaxtermterminate request count (maxterm)
Default value is 2.rw INTEGER .1.3.6.1.4.1.230.5.12.2.3.1.10 |
nvLcpconfMaxcfgconfigure request count (maxcfg)
Default value is 10.rw INTEGER .1.3.6.1.4.1.230.5.12.2.3.1.11 |
nvLcpconfMaxnakconfig-Nak send (maxnak)
Default value is 10.rw INTEGER .1.3.6.1.4.1.230.5.12.2.3.1.12 |
nvLcpconfInactivtynbus call inact timer (inactivty)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.12.2.3.1.13 |
nvLcpconfAuthppp authentication.
none, 1, Disable authentication
pap, 2, Password Authentication Protocol
chap, 3, Challenge Handshake Authentication Protocol
either, 4, First use CHAP, then try PAP
telno, 5, Telephone Number Authentication
prxypap, 6, Proxy PAP partial authentication
prxychap, 7, Proxy CHAP partial authentication
prxyeith, 8 Proxy PAP or CHAP partial authenticationrw Enumeration .1.3.6.1.4.1.230.5.12.2.3.1.14 |
nvLcpconfSecurtmrsecurity timer.rw INTEGER .1.3.6.1.4.1.230.5.12.2.3.1.15 |
nvLcpconfChalintrechallenge interval.rw INTEGER .1.3.6.1.4.1.230.5.12.2.3.1.16 |
nvLcpconfMultilinkIf yes this LCP is available for use in a multilink bundle.rw Enumeration .1.3.6.1.4.1.230.5.12.2.3.1.17 |
nvLcpconfpppTrapEnIf yes then trap generation is enabled for LCP state changes and
other PPP events.rw Enumeration .1.3.6.1.4.1.230.5.12.2.3.1.18 |
nvLcpconfComprot1First choice for compression.rw Enumeration .1.3.6.1.4.1.230.5.12.2.3.1.19 |
nvLcpconfComprot2Second choice for compression.rw Enumeration .1.3.6.1.4.1.230.5.12.2.3.1.20 |
nvLcpconfUsrdelimDelimiter for NAI parsingrw DisplayString .1.3.6.1.4.1.230.5.12.2.3.1.21 |
nvLcpconfNaifwdForward full NAI or only usernamerw Enumeration .1.3.6.1.4.1.230.5.12.2.3.1.22 |
nvLcpconfTxmaxbuftransmit bufferingrw INTEGER .1.3.6.1.4.1.230.5.12.2.3.1.23 |
nvLcpconfStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.12.2.3.1.26 |
nvMpconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.12.3 |
nvMpconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.12.3.1 |
nvMpconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.12.3.2 |
nvMpconfTablempconf file. SEQUENCE OF NvMpconfEntry .1.3.6.1.4.1.230.5.12.3.3 |
nvMpconfEntrympconf record. NvMpconfEntry .1.3.6.1.4.1.230.5.12.3.3.1 |
nvMpconfIndexIndex of Mpconf record.ro INTEGER .1.3.6.1.4.1.230.5.12.3.3.1.1 |
nvMpconfProfileMust match lcp record itiudata (async ppp) or rsrcpool (sync ppp) field for
multilink to operate on the lcp.rw DisplayString .1.3.6.1.4.1.230.5.12.3.3.1.2 |
nvMpconfAdminSIf set to enable no multilink sessions can be started
from LCP records which match the nvMpconfProfile of this record.rw Enumeration .1.3.6.1.4.1.230.5.12.3.3.1.3 |
nvMpconfTrapEnableIf set to yes Nevada enterprise traps will be generated for
certain events occuring relative to multilink bundles. For example,
when a new link joins a multilink bundle. No traps for multilink
are generated if set to no.rw Enumeration .1.3.6.1.4.1.230.5.12.3.3.1.4 |
nvMpconfLnkLimitThe maximum number of links permitted in multilink bundles
created from this mpconf record.rw INTEGER .1.3.6.1.4.1.230.5.12.3.3.1.5 |
nvMpconfTxFragWhen set to yes PPP datagrams larger than nvMpconfTxFragMin bytes
will be fragmented before transmission on the links in the bundle.rw Enumeration .1.3.6.1.4.1.230.5.12.3.3.1.6 |
nvMpconfTxFragMinPPP datagrams smaller than mvMpconfTxFragMin bytes will not be fragmented
before transmission regardless of the setting of nvMpconfTxFrag.rw INTEGER .1.3.6.1.4.1.230.5.12.3.3.1.7 |
nvMpconfTxShortSeqWhen set to yes the Nevada will attempt to negotiate the short sequence
number option on multilink bundles created from this record. When
set to no the Nevada will reject attempts to negotiate short sequence
numbers.rw Enumeration .1.3.6.1.4.1.230.5.12.3.3.1.8 |
nvMpconfComprot1First choice for compression.rw Enumeration .1.3.6.1.4.1.230.5.12.3.3.1.9 |
nvMpconfComprot2Second choice for compression.rw Enumeration .1.3.6.1.4.1.230.5.12.3.3.1.10 |
nvMpconfComptypeSecond choice for compression.rw Enumeration .1.3.6.1.4.1.230.5.12.3.3.1.11 |
nvMpconfStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.12.3.3.1.24 |
nvMpstatPart1 OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.12.4 |
nvMpstatPart1MaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.12.4.1 |
nvMpstatPart1NumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.12.4.2 |
nvMpstatPart1TablempstatPart1 file. SEQUENCE OF NvMpstatPart1Entry .1.3.6.1.4.1.230.5.12.4.3 |
nvMpstatPart1EntrympstatPart1 record. NvMpstatPart1Entry .1.3.6.1.4.1.230.5.12.4.3.1 |
nvMpstatPart1IndexIndex of MpstatPart1 recordro INTEGER .1.3.6.1.4.1.230.5.12.4.3.1.1 |
nvMpstatPart1UserNameAuthenticated name of remote peer.ro DisplayString .1.3.6.1.4.1.230.5.12.4.3.1.2 |
nvMpstatPart1IpcpOperSIpcp operation status (ipcpOperS)- IPCP protocol up or not.ro Enumeration .1.3.6.1.4.1.230.5.12.4.3.1.3 |
nvMpstatPart1Ipcpipcpconf file record number in use for this multilink bundle (ipcp).ro INTEGER .1.3.6.1.4.1.230.5.12.4.3.1.4 |
nvMpstatPart1IpAddressIP address in use on this multilink bundle (ipaddr).ro DisplayString .1.3.6.1.4.1.230.5.12.4.3.1.5 |
nvMpstatPart1ProfilenvMpconfProfile value of nvMpconfTable entry (mpconf record) used
to create this multilink bundle (profile).ro DisplayString .1.3.6.1.4.1.230.5.12.4.3.1.6 |
nvMpstatPart1RmtClassClass of endpoint discriminator in use on remote (peer) end of
multilink bundle (rmtClass).ro Enumeration .1.3.6.1.4.1.230.5.12.4.3.1.7 |
nvMpstatPart1RmtDiscValue of endpoint discriminator in use on remote (peer) end of
multilink bundle (rmtDisc).ro DisplayString .1.3.6.1.4.1.230.5.12.4.3.1.8 |
nvMpstatPart1LocClassClass of endpoint discriminator in use on local (Nevada) end of
multilink bundle (locClass).ro Enumeration .1.3.6.1.4.1.230.5.12.4.3.1.9 |
nvMpstatPart1LocDiscValue of endpoint discriminator in use on local (Nevada) end of
multilink bundle (rmtDisc).ro DisplayString .1.3.6.1.4.1.230.5.12.4.3.1.10 |
nvMpstatPart1RmtMRRUValue for the Maximum Reassembled Receive Unit negotiated for remote (peer)
end of multilink bundle (rmtMRRU).ro INTEGER .1.3.6.1.4.1.230.5.12.4.3.1.11 |
nvMpstatPart1LocMRRUValue for the Maximum Reassembled Receive Unit negotiated for local (Nevada)
end of multilink bundle (locMRRU).ro INTEGER .1.3.6.1.4.1.230.5.12.4.3.1.12 |
nvMpstatPart1RmtSeqSIndicates whether short or long sequence numbers are in use for multilink
datagrams transmitted to the peer by the Nevada (rmtSeq).ro Enumeration .1.3.6.1.4.1.230.5.12.4.3.1.13 |
nvMpstatPart1LocSeqSIndicates whether short or long sequence numbers are in use for multilink
datagrams received by the Nevada (locSeq).ro Enumeration .1.3.6.1.4.1.230.5.12.4.3.1.14 |
nvMpstatPart1Link1The LCP record number corresponding to nth link in the multilink bundle (link n).ro DisplayString .1.3.6.1.4.1.230.5.12.4.3.1.15 |
nvMpstatPart1Link2The LCP record number corresponding to nth link in the multilink bundle (link n).ro DisplayString .1.3.6.1.4.1.230.5.12.4.3.1.16 |
nvMpstatPart1Link3The LCP record number corresponding to nth link in the multilink bundle (link n).ro DisplayString .1.3.6.1.4.1.230.5.12.4.3.1.17 |
nvMpstatPart1Link4The LCP record number corresponding to nth link in the multilink bundle (link n).ro DisplayString .1.3.6.1.4.1.230.5.12.4.3.1.18 |
nvMpstatPart1Link5The LCP record number corresponding to nth link in the multilink bundle (link n).ro DisplayString .1.3.6.1.4.1.230.5.12.4.3.1.19 |
nvMpstatPart1Link6The LCP record number corresponding to nth link in the multilink bundle (link n).ro DisplayString .1.3.6.1.4.1.230.5.12.4.3.1.20 |
nvMpstatPart1Link7The LCP record number corresponding to nth link in the multilink bundle (link n).ro DisplayString .1.3.6.1.4.1.230.5.12.4.3.1.21 |
nvMpstatPart1Link8The LCP record number corresponding to nth link in the multilink bundle (link n).ro DisplayString .1.3.6.1.4.1.230.5.12.4.3.1.22 |
nvMpstatPart1Link9The LCP record number corresponding to nth link in the multilink bundle (link n).ro DisplayString .1.3.6.1.4.1.230.5.12.4.3.1.23 |
nvMpstatPart1Link10The LCP record number corresponding to nth link in the multilink bundle (link n).ro DisplayString .1.3.6.1.4.1.230.5.12.4.3.1.24 |
nvMpstatPart1Link11The LCP record number corresponding to nth link in the multilink bundle (link n).ro DisplayString .1.3.6.1.4.1.230.5.12.4.3.1.25 |
nvMpstatPart1Link12The LCP record number corresponding to nth link in the multilink bundle (link n).ro DisplayString .1.3.6.1.4.1.230.5.12.4.3.1.26 |
nvMpstatPart1Link13The LCP record number corresponding to nth link in the multilink bundle (link n).ro DisplayString .1.3.6.1.4.1.230.5.12.4.3.1.27 |
nvMpstatPart1Link14The LCP record number corresponding to nth link in the multilink bundle (link n).ro DisplayString .1.3.6.1.4.1.230.5.12.4.3.1.28 |
nvMpstatPart1Link15The LCP record number corresponding to nth link in the multilink bundle (link n).ro DisplayString .1.3.6.1.4.1.230.5.12.4.3.1.29 |
nvMpstatPart1Link16The LCP record number corresponding to nth link in the multilink bundle (link n).ro DisplayString .1.3.6.1.4.1.230.5.12.4.3.1.30 |
nvMpstatPart2 OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.12.5 |
nvMpstatPart2MaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.12.5.1 |
nvMpstatPart2NumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.12.5.2 |
nvMpstatPart2TablempstatPart2 file. SEQUENCE OF NvMpstatPart2Entry .1.3.6.1.4.1.230.5.12.5.3 |
nvMpstatPart2EntrympstatPart2 record. NvMpstatPart2Entry .1.3.6.1.4.1.230.5.12.5.3.1 |
nvMpstatPart2IndexIndex of MpstatPart2 recordro INTEGER .1.3.6.1.4.1.230.5.12.5.3.1.1 |
nvMpstatPart2InOctetsOctets received (InOctets)
The number of good data bytes received
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.5.3.1.2 |
nvMpstatPart2InPktsgood packets received (InPkts)
The number of good received frames
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.5.3.1.3 |
nvMpstatPart2InBfragsThe number of good received multilink frames with the
B bit set in the multilink header (beginning fragment).
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.5.3.1.4 |
nvMpstatPart2InEfragsThe number of good received multilink frames with the
E bit set in the multilink header (ending fragment) .
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.5.3.1.5 |
nvMpstatPart2InMfragsThe number of good received multilink frames with neither
the B nor the E bit set in the multilink header (middle fragment).
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.5.3.1.6 |
nvMpstatPart2InRsmErrnumber of times the multilink receive algorithm detected
one or more lost PPP datagrams (InRsmErr).
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.5.3.1.7 |
nvMpstatPart2InDiscrddiscarded good packets (InDiscrd)
The total number of good frames dicarded due to lack of buffers
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.5.3.1.8 |
nvMpstatPart2InErrorsBad packets received (InError)
The total number of frames received with errors due to crc,format etc.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.5.3.1.9 |
nvMpstatPart2InEchreceived echo requests (InEch)
The number of echo request packets recieved.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.5.3.1.10 |
nvMpstatPart2InEchRpecho reply received (InEchRp)
The num of packets Rxed due to the echo-req sent (software loopback)
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.5.3.1.11 |
nvMpstatPart2InDiscRqdiscard requests Rxed (InDiscRq)
The number of discard request packets received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.5.3.1.12 |
nvMpstatPart2UnKnwnPrrxed Unknown protocol (UnKnwnPr)
The number of link quality reports received on this PPP link
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.5.3.1.13 |
nvMpstatPart2OutOctetsOctets transmitted (OutOctets)
The number of bytes transmitted on the ppp link.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.5.3.1.14 |
nvMpstatPart2OutPktsPackets transmitted (OutPkts)
The number of pakets transmitted on the PPP link.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.5.3.1.15 |
nvMpstatPart2OutBfragsThe number of multilink frames transmitted with the
B bit set in the multilink header (beginning fragment).
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.5.3.1.16 |
nvMpstatPart2OutEfragsThe number of multilink frames transmitted with the
E bit set in the multilink header (ending fragment) .
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.5.3.1.17 |
nvMpstatPart2OutMfragsThe number of multilink frames transmitted with neither
the B nor the E bit set in the multilink header (middle fragment).
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.5.3.1.18 |
nvMpstatPart2OutDiscrdoutput errors (OutDiscrd)
The number of outbound pkts droped due to lack of buffers.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.5.3.1.19 |
nvMpstatPart2OutErrorsoutput errors (OutErrors)
The number of outbound pkts could not be txed due to errors.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.5.3.1.20 |
nvMpstatPart2OutEchecho request pkts transmitted (OutEch)
The number of lcp echo request packets transmitted
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.5.3.1.21 |
nvMpstatPart2OutEchRpecho reply transmitted (OutEchRp)
The num of echo reply packets Txed due to the echo-req
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.5.3.1.22 |
nvMpstatPart2OutDiscRqdiscard requests Txed (OutDiscRq)
The number of discard request packets received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.12.5.3.1.23 |
nvMpstatPart2OutCmPcntPercent compression on tx.ro Counter --AF .1.3.6.1.4.1.230.5.12.5.3.1.24 |
nvMpstatPart2InCmPcntPercent compression on rx.ro Counter --AF .1.3.6.1.4.1.230.5.12.5.3.1.25 |
nvMpstatPart2OutExpndsNumber of packets expanded by compression.ro Counter --AF .1.3.6.1.4.1.230.5.12.5.3.1.26 |
nvMpstatPart2Dtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.12.5.3.1.27 |
nevadaElx OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.15 |
nvElxstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.15.1 |
nvElxstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.15.1.1 |
nvElxstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.15.1.2 |
nvElxstatTableelxstat file. SEQUENCE OF NvElxstatEntry .1.3.6.1.4.1.230.5.15.1.3 |
nvElxstatEntryelxstat record. NvElxstatEntry .1.3.6.1.4.1.230.5.15.1.3.1 |
nvElxstatIndexIndex of elxstat recordro INTEGER .1.3.6.1.4.1.230.5.15.1.3.1.1 |
nvElxstatPhysAddrEthernet Physical Address (PhysAddr)
This field contains the Ethernet address as configured at the
factory.ro DisplayString .1.3.6.1.4.1.230.5.15.1.3.1.2 |
nvElxstatAdminStatDesired Interface state (AdminStat)
The desired state of the interface. This field reflects the
desired state of the interface as determined by the enable
field of the ELXCONF file,as well as the ELX.UP and ELX.DOWN
commands.ro Enumeration .1.3.6.1.4.1.230.5.15.1.3.1.3 |
nvElxstatOperStatCurrent Interface state (OperStat)
The current operational state of the Ethernet interface. This
is determined by the AdminStat and whether or not any transmit
faults were detected.ro Enumeration .1.3.6.1.4.1.230.5.15.1.3.1.4 |
nvElxstatInOctetsOctets received on the interface (InOctets)
The total number of octets received on the interface,
including framing characters.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.15.1.3.1.5 |
nvElxstatInUcastsUnicast packets delivered (InUcast)
The number of subnetwork unicast packets delivered to a
higher layer protocol.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.15.1.3.1.6 |
nvElxstatInNUcastsNon unicast packets delivered (InNUcast)
The number of non unicast,i.e.,subnetwork broadcast or
subnetwork multicast,packets delivered to a higher layer
protocol.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.15.1.3.1.7 |
nvElxstatInDiscardsDiscarded input packets (InDiscard)
The number of inbound packets which were chosen to be
discarded even though no errors had been detected to
prevent their being deliverable to a higher layer
protocol. One possible reason for discarding such a
packet could be to free up buffer space.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.15.1.3.1.8 |
nvElxstatInErrorsError input packets (InError)
The number of inbound packets that contained errors
preventing them from being deliverable to a higher
layer protocol.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.15.1.3.1.9 |
nvElxstatUnKnwnPrsUnknown protocol packets discarded (UnKnwnPr)
The number of packets received via the interface which
were discarded because of an unknown or unsupported
protocol.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.15.1.3.1.10 |
nvElxstatOutOctetsOctets transmitted from the interface (OutOctets)
The total number of octets transmitted out the
interface,including framing characters.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.15.1.3.1.11 |
nvElxstatOutUcastsUnicast packets transmitted (OutUcast)
The total number of packets that higher level protocols
requested be transmitted to a subnetwork unicast address,
including those that were discarded or not sent.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.15.1.3.1.12 |
nvElxstatOutNUcastsNon unicast packets transmitted (OutNUcast)
The total number of packets that highel level protocols
requested be transmitted to a non unicast,i.e.,a
subnetwork broadcast or subnetwork multicast,address,
including those that were discarded or not sent.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.15.1.3.1.13 |
nvElxstatOutDiscrdsDiscarded output packets (OutDiscrd)
The number of outbound packets which were chosen to be
discarded even though no errors had been detected to
prevent their being transmitted. One possible reason for
discarding such a packet could be to free up buffer
space.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.15.1.3.1.14 |
nvElxstatOutErrorsError output packets (OutErrors)
The number of outbound packets that could not be
transmitted because of errors.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.15.1.3.1.15 |
nvElxstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.15.1.3.1.16 |
nvElxconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.15.2 |
nvElxconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.15.2.1 |
nvElxconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.15.2.2 |
nvElxconfTableelxconf file. SEQUENCE OF NvElxconfEntry .1.3.6.1.4.1.230.5.15.2.3 |
nvElxconfEntryelxconf record. NvElxconfEntry .1.3.6.1.4.1.230.5.15.2.3.1 |
nvElxconfIndexIndex of elxconf recordro INTEGER .1.3.6.1.4.1.230.5.15.2.3.1.1 |
nvElxconfEnableEthernet interface enabled (enable)
This field indicates whether or not the Ethernet interface should
be enabled. Note that disabling the interface does not disable
IP. IP may still route between its other networks,such as X.25
and Frame Relay.
Default value is yes (1+1).rw Enumeration .1.3.6.1.4.1.230.5.15.2.3.1.2 |
nvElxconfInactivtyInactivity test frame timer (inactivty)
When this time in minutes has been exceeded with no activity on the
Ethernet,a frame will be transmitted in order to check for transmit
faults.
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.15.2.3.1.3 |
nevadaIp OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.16 |
nvIpconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.16.1 |
nvIpconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.16.1.1 |
nvIpconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.16.1.2 |
nvIpconfTableipconf file. SEQUENCE OF NvIpconfEntry .1.3.6.1.4.1.230.5.16.1.3 |
nvIpconfEntryipconf record. NvIpconfEntry .1.3.6.1.4.1.230.5.16.1.3.1 |
nvIpconfIndexIndex of ipconf recordro INTEGER .1.3.6.1.4.1.230.5.16.1.3.1.1 |
nvIpconfIpaddrIP address of local LAN (ipaddr)
This field is a 15 byte character string in IP dotted address format.rw DisplayString .1.3.6.1.4.1.230.5.16.1.3.1.7 |
nvIpconfMaskIP network mask (mask)
This field is a 15 byte character string in IP dotted address format.rw DisplayString .1.3.6.1.4.1.230.5.16.1.3.1.8 |
nvIpconfBcastaddrOutgoing broadcast IP address (bcastaddr)
This field is a 15 byte character string in IP dotted address format.rw DisplayString .1.3.6.1.4.1.230.5.16.1.3.1.9 |
nvIpconfMtuMaximum frame length on this interface (mtu)
Default value is 1500.rw INTEGER .1.3.6.1.4.1.230.5.16.1.3.1.10 |
nvIpconfEncapEncapsulation type
Default value is v2 (0+1).rw Enumeration .1.3.6.1.4.1.230.5.16.1.3.1.11 |
nvIpconfRoutprotIP routing protocol (routprot).rw Enumeration .1.3.6.1.4.1.230.5.16.1.3.1.12 |
nvIpconfStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.16.1.3.1.17 |
nvIpstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.16.2 |
nvIpstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.16.2.1 |
nvIpstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.16.2.2 |
nvIpstatTableipstat file. SEQUENCE OF NvIpstatEntry .1.3.6.1.4.1.230.5.16.2.3 |
nvIpstatEntryipstat record. NvIpstatEntry .1.3.6.1.4.1.230.5.16.2.3.1 |
nvIpstatIndexIndex of ipstat recordro INTEGER .1.3.6.1.4.1.230.5.16.2.3.1.1 |
nvIpstatInRxsInput datagrams received (InRx)
The total number of input datagrams received from
interfaces,including those received in error.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.2.3.1.2 |
nvIpstatInHdrErrsInput datagrams with header errors (InHdrErr)
The number of input datagrams discarded due to
errors in their IP headers,including bad
checksums,version number mismatch,other format
errors,time-to-live exceeded,errors discovered
in processing their IP options,etc.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.2.3.1.3 |
nvIpstatInAdrErrsInput datagrams with address errors (InAdrErr)
The number of input datagrams discarded because
the IP address in their IP header's destination
field was not a valid address to be received at
this entity. This count includes invalid
addresses (e.g.,0.0.0.0) and addresses of
unsupported Classes (e.g.,Class E). For entities
which are not IP Gateways and therefore do not
forward datagrams,this counter includes datagrams
discarded because the destination address was not
a local address.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.2.3.1.4 |
nvIpstatForwDatasInput datagrams forwarded (ForwData)
The number of input datagrams for which this
entity was not their final IP destination,as a
result of which an attempt was made to find a
route to forward them to that final destination.
In entities which do not act as IP Gateways,this
counter will include only those packets which were
Source-Routed via this entity,and the Source-
Route option processing was successful.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.2.3.1.5 |
nvIpstatUnKnwnPrsInput datagrams with protocol errors (UnKnwnPr)
The number of locally-addressed datagrams
received successfully but discarded because of an
unknown or unsupported protocol.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.2.3.1.6 |
nvIpstatInDiscrdsInput datagrams with buffer errors (InDiscrd)
The number of input IP datagrams for which no
problems were encountered to prevent their
continued processing,but which were discarded
(e.g.,for lack of buffer space). Note that this
counter does not include any datagrams discarded
while waiting re-assembly.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.2.3.1.7 |
nvIpstatInDlvrsInput datagrams delivered (InDlvrs)
The total number of input datagrams successfully
delivered to IP user-protocols (including ICMP).
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.2.3.1.8 |
nvIpstatOutRqstsLocal datagrams created (OutRqst)
The total number of IP datagrams which local IP
user protocols (including ICMP) supplied to IP in
requests for transmission. Note that this counter
does not include any datagrams counted in ForwData.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.2.3.1.9 |
nvIpstatOutDiscrdsOutput datagrams with buffer errors (OutDiscrd)
The number of output IP datagrams for which no
problem was encountered to prevent their
transmission to their destination,but which were
discarded (e.g.,for lack of buffer space). Note
that this counter would include datagrams counted
in ForwData if any such packets met this
(discretionary) discard criterion.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.2.3.1.10 |
nvIpstatOutNoRtsOutput datagrams with address errors (OutNoRts)
The number of IP datagrams discarded because no
route could be found to transmit them to their
destination. Note that this counter includes any
packets counted in ForwData which meet this
`no-route' criterion. Note that this includes any
datagrams which a host cannot route because all of
its default gateways are down.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.2.3.1.11 |
nvIpstatReasmRqdsReceived IP fragments (ReasmRqd)
The number of IP fragments received which needed
to be reassembled at this entity.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.2.3.1.12 |
nvIpstatReasmOKsDatagrams successfully reassembled (ReasmOK)
The number of IP datagrams successfully reassembled.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.2.3.1.13 |
nvIpstatReasmFailsDatagram reassembly failures (ReasmFail)
The number of errors detected by the IP re-assembly algorithm
(for whatever reason: timed out,errors,etc). Note that this
is not necessarily a count of discarded IP fragments since some
algorithms (notably the algorithm in RFC 815) can loose track
of the number of fragments by combining them as they are received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.2.3.1.14 |
nvIpstatFragOKsDatagrams successfully fragmented (FragOK)
The number of IP datagrams that have been
successfully fragmented at this entity.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.2.3.1.15 |
nvIpstatFragFailsDatagrams with fragmentation errors (FragFail)
The number of IP datagrams that have been
discarded because they needed to be fragmented at
this entity but could not be,e.g.,because their
Don't Fragment flag was set.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.2.3.1.16 |
nvIpstatFragCrsFragments created (FragCr)
The number of IP datagram fragments that have
been generated as a result of fragmentation at
this entity.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.2.3.1.17 |
nvIpstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.16.2.3.1.18 |
nvIpwanmap OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.16.3 |
nvIpwanmapMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.16.3.1 |
nvIpwanmapNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.16.3.2 |
nvIpwanmapTableipwanmap file. SEQUENCE OF NvIpwanmapEntry .1.3.6.1.4.1.230.5.16.3.3 |
nvIpwanmapEntryipwanmap record. NvIpwanmapEntry .1.3.6.1.4.1.230.5.16.3.3.1 |
nvIpwanmapIndexIndex of ipwanmap recordro INTEGER .1.3.6.1.4.1.230.5.16.3.3.1.1 |
nvIpwanmapIpaddrIP address of local LAN (ipaddr)
This field is a 15 byte character string in IP dotted address format.rw DisplayString .1.3.6.1.4.1.230.5.16.3.3.1.7 |
nvIpwanmapMaskIP network mask (mask)
This field is a 15 byte character string in IP dotted address format.rw DisplayString .1.3.6.1.4.1.230.5.16.3.3.1.8 |
nvIpwanmapBcastcntlSend internally generated broadcasts (broadcast)
This field is a 15 byte character string in IP dotted address format.rw Enumeration .1.3.6.1.4.1.230.5.16.3.3.1.9 |
nvIpwanmapMtuMaximum frame length on this interface (mtu)
Default value is 1500.rw INTEGER .1.3.6.1.4.1.230.5.16.3.3.1.10 |
nvIpwanmapMetricCost of route (metric)
Default value is 1.rw INTEGER .1.3.6.1.4.1.230.5.16.3.3.1.11 |
nvIpwanmapInactivtyInactivity timer (inactivty).rw INTEGER .1.3.6.1.4.1.230.5.16.3.3.1.12 |
nvIpwanmapNetaddrCalled address (netaddr).rw DisplayString .1.3.6.1.4.1.230.5.16.3.3.1.13 |
nvIpwanmapUserdatUser data (userdat)rw DisplayString .1.3.6.1.4.1.230.5.16.3.3.1.14 |
nvIpwanmapRevaccReverse charging accepted? (revacc)
Default value is no (0+1).rw Enumeration .1.3.6.1.4.1.230.5.16.3.3.1.15 |
nvIpwanmapRevcallReverse charging flag (revacc)
Default value is no (0+1).rw Enumeration .1.3.6.1.4.1.230.5.16.3.3.1.16 |
nvIpwanmapTputThroughput (tput)
Default value is link (0+1).rw Enumeration .1.3.6.1.4.1.230.5.16.3.3.1.17 |
nvIpwanmapPsizeMax packet size (psize)
Default value is 8+1.rw Enumeration .1.3.6.1.4.1.230.5.16.3.3.1.18 |
nvIpwanmapWsizeMax window size (wsize)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.16.3.3.1.19 |
nvIpwanmapCugtypeClosed user group type (cugtype)
Default value is nocug (0+1).rw Enumeration .1.3.6.1.4.1.230.5.16.3.3.1.20 |
nvIpwanmapCugClosed user group number (cug)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.16.3.3.1.21 |
nvIpwanmapRpoaRPOA number (rpoa)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.16.3.3.1.22 |
nvIpwanmapPvcidPVC ID - zero if SVC (pvcid)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.16.3.3.1.23 |
nvIpwanmapFrpvcFrame Relay PVC record (frpvc)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.16.3.3.1.24 |
nvIpwanmapNetprotNetwork protocol (netprot)
Default value is x25 (0+1).rw Enumeration .1.3.6.1.4.1.230.5.16.3.3.1.25 |
nvIpwanmapIpcpIPCPCONF record number (ipcp)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.16.3.3.1.26 |
nvIpwanmapIdnumPDS 974 stringid of calling addr
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.16.3.3.1.27 |
nvIpwanmapStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.16.3.3.1.36 |
nvIproute OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.16.4 |
nvIprouteMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.16.4.1 |
nvIprouteNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.16.4.2 |
nvIprouteTableiproute file. SEQUENCE OF NvIprouteEntry .1.3.6.1.4.1.230.5.16.4.3 |
nvIprouteEntryiproute record. NvIprouteEntry .1.3.6.1.4.1.230.5.16.4.3.1 |
nvIprouteIndexIndex of iproute recordro INTEGER .1.3.6.1.4.1.230.5.16.4.3.1.1 |
nvIprouteIpaddrIP destination address (ipaddr)
This field is a 15 byte character string in IP dotted address format.rw DisplayString .1.3.6.1.4.1.230.5.16.4.3.1.3 |
nvIprouteMaskIP destination mask (ipmask)
This field is a 15 byte character string in IP dotted address format.rw DisplayString .1.3.6.1.4.1.230.5.16.4.3.1.4 |
nvIprouteNexthopNext hop IP address (nexthop)
This field is a 15 byte character string in IP dotted address format.rw DisplayString .1.3.6.1.4.1.230.5.16.4.3.1.5 |
nvIprouteMetricCost of route (metric)
Default value is 1.rw INTEGER .1.3.6.1.4.1.230.5.16.4.3.1.6 |
nvIprouteStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.16.4.3.1.12 |
nvIprtstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.16.5 |
nvIprtstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.16.5.1 |
nvIprtstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.16.5.2 |
nvIprtstatTableiprtstat file. SEQUENCE OF NvIprtstatEntry .1.3.6.1.4.1.230.5.16.5.3 |
nvIprtstatEntryiprtstat record. NvIprtstatEntry .1.3.6.1.4.1.230.5.16.5.3.1 |
nvIprtstatIndexIndex of iprtstat recordro INTEGER .1.3.6.1.4.1.230.5.16.5.3.1.1 |
nvIprtstatDestDestination address of this route (Dest)ro DisplayString .1.3.6.1.4.1.230.5.16.5.3.1.2 |
nvIprtstatInterfaceInterface for route (Interface)ro Enumeration .1.3.6.1.4.1.230.5.16.5.3.1.3 |
nvIprtstatMetricThe routing metric for this route (Metric)ro INTEGER .1.3.6.1.4.1.230.5.16.5.3.1.4 |
nvIprtstatNextHopThe address of the next hop (NextHop)ro DisplayString .1.3.6.1.4.1.230.5.16.5.3.1.5 |
nvIprtstatTypeThe type of route (Type)ro Enumeration .1.3.6.1.4.1.230.5.16.5.3.1.6 |
nvIprtstatProtoThe mechanism via which this route was learned (Proto)ro Enumeration .1.3.6.1.4.1.230.5.16.5.3.1.7 |
nvIcmpstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.16.6 |
nvIcmpstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.16.6.1 |
nvIcmpstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.16.6.2 |
nvIcmpstatTableicmpstat file. SEQUENCE OF NvIcmpstatEntry .1.3.6.1.4.1.230.5.16.6.3 |
nvIcmpstatEntryicmpstat record. NvIcmpstatEntry .1.3.6.1.4.1.230.5.16.6.3.1 |
nvIcmpstatIndexIndex of icmpstat recordro INTEGER .1.3.6.1.4.1.230.5.16.6.3.1.1 |
nvIcmpstatInMsgsInput messages received (InMsgs)
The total number of ICMP messages which the
entity received. Note that this counter includes
all those counted by InErrs.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.6.3.1.2 |
nvIcmpstatInErrsInput errors received (InErrs)
The number of ICMP messages which the entity
received but determined as having ICMP-specific
errors (bad ICMP checksums,bad length,etc.).
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.6.3.1.3 |
nvIcmpstatInDstUnrsDestination Unreachable messages recieved (InDstUnr)
The number of ICMP Destination Unreachable
messages received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.6.3.1.4 |
nvIcmpstatInTmExcdsTime Exceeded messages received (InTmExcd)
The number of ICMP Time Exceeded messages
received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.6.3.1.5 |
nvIcmpstatInPrmPrbsParameter Problem messages received (InPrmPrb)
The number of ICMP Parameter Problem messages
received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.6.3.1.6 |
nvIcmpstatInSrcQusSource Quench messages received (InSrcQu)
The number of ICMP Source Quench messages
received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.6.3.1.7 |
nvIcmpstatInRdrctsRedirect messages received (InRdrct)
The number of ICMP Redirect messages received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.6.3.1.8 |
nvIcmpstatInEchsEcho Request messages received (InEch)
The number of ICMP Echo (request) messages
received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.6.3.1.9 |
nvIcmpstatInEchRpsEcho Reply messages received (InEchRp)
The number of ICMP Echo Reply messages received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.6.3.1.10 |
nvIcmpstatInTmStsTimestamp Request messages received (InTmSt)
The number of ICMP Timestamp (request) messages
received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.6.3.1.11 |
nvIcmpstatInTmStRpsTimestamp Reply messages received (InTmStRp)
The number of ICMP Timestamp Reply messages
received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.6.3.1.12 |
nvIcmpstatInAdMsAddress Mask Request messages received (InAdMs)
The number of ICMP Address Mask Request messages
received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.6.3.1.13 |
nvIcmpstatInAdMsRpsAddress Mask Reply messages received (InAdMsRp)
The number of ICMP Address Mask Reply messages
received.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.6.3.1.14 |
nvIcmpstatOutMsgsOutput messages attempted (OutMsgs)
The total number of ICMP messages which this
entity attempted to send. Note that this counter
includes all those counted by OutErrs.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.6.3.1.15 |
nvIcmpstatOutErrsOutput messages not sent (OutErrs)
The number of ICMP messages which this entity did
not send due to problems discovered within ICMP
such as lack of buffers. This value should not
include errors discovered outside the ICMP layer
such as the inability of IP to route the resultant
datagram. In some implementations there may be no
types of errors which contribute to this counter's
value.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.6.3.1.16 |
nvIcmpstatOutDstUnrsDestination Unreachable messages sent (OutDstUnr)
The number of ICMP Destination Unreachable
messages sent.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.6.3.1.17 |
nvIcmpstatOutTmExcdsTime Exceeded messages sent (OutTmExcd)
The number of ICMP Time Exceeded messages sent.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.6.3.1.18 |
nvIcmpstatOutPrmPrbsParameter Problem messages sent (OutPrmPrb)
The number of ICMP Parameter Problem messages
sent.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.6.3.1.19 |
nvIcmpstatOutSrcQusSource Quench messages sent (OutSrcQu)
The number of ICMP Source Quench messages sent.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.6.3.1.20 |
nvIcmpstatOutRdrctsRedirect messages sent (OutRdrct)
The number of ICMP Redirect messages sent. For a
host,this object will always be zero,since hosts
do not send redirects.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.6.3.1.21 |
nvIcmpstatOutEchsEcho Request messages sent (OutEch)
The number of ICMP Echo (request) messages sent.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.6.3.1.22 |
nvIcmpstatOutEchRpsEcho Reply messages sent (OutEchRp)
The number of ICMP Echo Reply messages sent.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.6.3.1.23 |
nvIcmpstatOutTmStsTimestamp Request meessages sent (OutTmSt)
The number of ICMP Timestamp (request) messages
sent.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.6.3.1.24 |
nvIcmpstatOutTmStRpsTimestamp Reply messages sent (OutTmStRp)
The number of ICMP Timestamp Reply messages
sent.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.6.3.1.25 |
nvIcmpstatOutAdMsAddress Mask Request messages sent (OutAdMs)
The number of ICMP Address Mask Request messages
sent.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.6.3.1.26 |
nvIcmpstatOutAdMsRpsAddress Mask Reply messages sent (OutAdMsRp)
The number of ICMP Address Mask Reply messages
sent.
Statistic is zeroed at startup time.ro Counter .1.3.6.1.4.1.230.5.16.6.3.1.27 |
nvIcmpstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.16.6.3.1.28 |
nvIptrunk OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.16.7 |
nvIptrunkMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.16.7.1 |
nvIptrunkNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.16.7.2 |
nvIptrunkTableiptrunk file. SEQUENCE OF NvIptrunkEntry .1.3.6.1.4.1.230.5.16.7.3 |
nvIptrunkEntryiptrunk record. NvIptrunkEntry .1.3.6.1.4.1.230.5.16.7.3.1 |
nvIptrunkIndexIndex of iptrunk recordro INTEGER .1.3.6.1.4.1.230.5.16.7.3.1.1 |
nvIptrunkIpaddrIP destination address (ipaddr)
This field is a 15 byte character string in IP dotted address format.rw DisplayString .1.3.6.1.4.1.230.5.16.7.3.1.3 |
nvIptrunkDstiptrnkdestenation lapb link (Dstiptrnk)
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.16.7.3.1.5 |
nvIptrunkStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.16.7.3.1.9 |
nvIpcpconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.16.8 |
nvIpcpconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.16.8.1 |
nvIpcpconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.16.8.2 |
nvIpcpconfTableipcpconf file. SEQUENCE OF NvIpcpconfEntry .1.3.6.1.4.1.230.5.16.8.3 |
nvIpcpconfEntryipcpconf record. NvIpcpconfEntry .1.3.6.1.4.1.230.5.16.8.3.1 |
nvIpcpconfIndexIndex of Ipcpconf record.ro INTEGER .1.3.6.1.4.1.230.5.16.8.3.1.1 |
nvIpcpconfLcplink control proto rec-num (lcp)rw INTEGER .1.3.6.1.4.1.230.5.16.8.3.1.2 |
nvIpcpconfCompresscompress flag.rw Enumeration .1.3.6.1.4.1.230.5.16.8.3.1.3 |
nvIpcpconfTesttest mode.rw Enumeration .1.3.6.1.4.1.230.5.16.8.3.1.4 |
nvIpcpconfProfileIpcp Profile Namerw DisplayString .1.3.6.1.4.1.230.5.16.8.3.1.5 |
nvIpcpconfDnsadd1IP address of primary DNS serverrw DisplayString .1.3.6.1.4.1.230.5.16.8.3.1.7 |
nvIpcpconfDnsadd2IP address of secondary DNS serverrw DisplayString .1.3.6.1.4.1.230.5.16.8.3.1.8 |
nvIpcpconfNbnsadd1IP address of primary NBNS serverrw DisplayString .1.3.6.1.4.1.230.5.16.8.3.1.9 |
nvIpcpconfNbnsadd2IP address of secondary NBNS serverrw DisplayString .1.3.6.1.4.1.230.5.16.8.3.1.10 |
nvIpcpconfStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.16.8.3.1.12 |
nevadaTcp OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.17 |
nvTcpstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.17.1 |
nvTcpstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.17.1.1 |
nvTcpstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.17.1.2 |
nvTcpstatTabletcpstat file. SEQUENCE OF NvTcpstatEntry .1.3.6.1.4.1.230.5.17.1.3 |
nvTcpstatEntrytcpstat record, indexed by record number NvTcpstatEntry .1.3.6.1.4.1.230.5.17.1.3.1 |
nvTcpstatIndexIndex of tcpstat recordro INTEGER .1.3.6.1.4.1.230.5.17.1.3.1.1 |
nvTcpstatConnattemptsconnection attempts made.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.2 |
nvTcpstatAcceptsconnections accepted.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.3 |
nvTcpstatConnectsconnections established.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.4 |
nvTcpstatDropsconnections dropped.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.5 |
nvTcpstatConndropsembryonic conns dropped.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.6 |
nvTcpstatClosedsconn closed inlc drops.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.7 |
nvTcpstatSegstimedssegs where tried to get rt.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.8 |
nvTcpstatRttupdatedstimes succeeded.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.9 |
nvTcpstatDelacksdelayed acls sent.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.10 |
nvTcpstatTimeoutdropsconn dropped in rxmt timeout.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.11 |
nvTcpstatRexmttimeosretransmit timeouts.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.12 |
nvTcpstatPersisttimeospersist timeouts.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.13 |
nvTcpstatKeeptimeoskeepalive timeouts.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.14 |
nvTcpstatKeepprobeskeepalive probes sent.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.15 |
nvTcpstatKeepdropsconnections dropped in keep alive.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.16 |
nvTcpstatSndtotalstotal packets sent.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.17 |
nvTcpstatSndpacksdata packets sent.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.18 |
nvTcpstatSndbytesdata bytes sent.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.19 |
nvTcpstatSndrexmitpacksdata packetes retransmitted.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.20 |
nvTcpstatSndrexmitbytesdata bytes retransmitted.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.21 |
nvTcpstatSndacksack only packets sent.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.22 |
nvTcpstatSndprobeswindow probes sent.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.23 |
nvTcpstatSndurgspackets sent with urg only.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.24 |
nvTcpstatSndwinupswindow update only packets.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.25 |
nvTcpstatSndctrlscontrol SYN|FIN|RST packets.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.26 |
nvTcpstatRcvtotalstotal packets rcvd.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.27 |
nvTcpstatRcvpackspackets rcvd in sequence.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.28 |
nvTcpstatRcvbytesbytes rcvd in sequence.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.29 |
nvTcpstatRcvbadsumspackets rcvd with cksum errors.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.30 |
nvTcpstatRcvbadoffspackets rcvd with bad offset.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.31 |
nvTcpstatRcvshortspackets rcvd too short.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.32 |
nvTcpstatRcvduppacksdup only packets rcvd.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.33 |
nvTcpstatRcvdupbytesdup only bytes rcvd.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.34 |
nvTcpstatRcvpartduppackspackets with some dup data.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.35 |
nvTcpstatRcvpartdupbytesdup bytes in part dup packets.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.36 |
nvTcpstatRcvoopacksout of order packets rcvd.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.37 |
nvTcpstatRcvoobytesout of order bytes rcvd.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.38 |
nvTcpstatRcvpackafterwinspackets rcvd after window.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.39 |
nvTcpstatRcvbyteafterwinsbytes rcvd after window.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.40 |
nvTcpstatRcvafterclosespackets rcvd after close.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.41 |
nvTcpstatRcvwinprobesrcvd window probe packets.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.42 |
nvTcpstatRcvdupacksrcvd duplicate acks.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.43 |
nvTcpstatRcvacktoomuchsrcvd acks for unsent data.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.44 |
nvTcpstatRcvackpacksrcvd ack packets.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.45 |
nvTcpstatRcvackbytesbytes acked by rcvd acks.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.46 |
nvTcpstatRcvwinupdsrcvd window update pkts.ro Counter .1.3.6.1.4.1.230.5.17.1.3.1.47 |
nvTcpstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.17.1.3.1.48 |
nvTcpcnstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.17.2 |
nvTcpcnstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.17.2.1 |
nvTcpcnstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.17.2.2 |
nvTcpcnstatTabletcpcnstat file. SEQUENCE OF NvTcpcnstatEntry .1.3.6.1.4.1.230.5.17.2.3 |
nvTcpcnstatEntrytcpcnstat record, indexed by record number NvTcpcnstatEntry .1.3.6.1.4.1.230.5.17.2.3.1 |
nvTcpcnstatIndexIndex of tcpcnstat recordro INTEGER .1.3.6.1.4.1.230.5.17.2.3.1.1 |
nvTcpcnstatStateConnection state.ro Enumeration .1.3.6.1.4.1.230.5.17.2.3.1.2 |
nvTcpcnstatLocaladdrLocal host address.ro DisplayString .1.3.6.1.4.1.230.5.17.2.3.1.3 |
nvTcpcnstatLocalportLocal port.ro INTEGER .1.3.6.1.4.1.230.5.17.2.3.1.4 |
nvTcpcnstatRemaddrRemote host address.ro DisplayString .1.3.6.1.4.1.230.5.17.2.3.1.5 |
nvTcpcnstatRemportRemote port.ro INTEGER .1.3.6.1.4.1.230.5.17.2.3.1.6 |
nvTcpcnstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.17.2.3.1.7 |
nvTcprstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.17.3 |
nvTcprstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.17.3.1 |
nvTcprstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.17.3.2 |
nvTcprstatTabletcprstat file. SEQUENCE OF NvTcprstatEntry .1.3.6.1.4.1.230.5.17.3.3 |
nvTcprstatEntrytcprstat record, indexed by record number NvTcprstatEntry .1.3.6.1.4.1.230.5.17.3.3.1 |
nvTcprstatIndexIndex of tcprstat recordro INTEGER .1.3.6.1.4.1.230.5.17.3.3.1.1 |
nvTcprstatInportPort number to check for traffic from IP.ro INTEGER .1.3.6.1.4.1.230.5.17.3.3.1.2 |
nvTcprstatOutportPort number to route call to if inport match.ro INTEGER .1.3.6.1.4.1.230.5.17.3.3.1.3 |
nvTcprstatServicecomponent using the port number.ro DisplayString .1.3.6.1.4.1.230.5.17.3.3.1.4 |
nvTcprstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.17.3.3.1.5 |
nvNsockconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.17.4 |
nvNsockconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.17.4.1 |
nvNsockconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.17.4.2 |
nvNsockconfTabletcpstat file. SEQUENCE OF NvNsockconfEntry .1.3.6.1.4.1.230.5.17.4.3 |
nvNsockconfEntrytcpstat record, indexed by record number NvNsockconfEntry .1.3.6.1.4.1.230.5.17.4.3.1 |
nvNsockconfIndexIndex of nsockconf recordro INTEGER .1.3.6.1.4.1.230.5.17.4.3.1.1 |
nvNsockconfMaxconnMaximum number of connections.rw INTEGER .1.3.6.1.4.1.230.5.17.4.3.1.2 |
nvNsockconfStatusnsockconf recordrw Enumeration .1.3.6.1.4.1.230.5.17.4.3.1.3 |
nvNsockconfDefportdefault TCP port.rw INTEGER .1.3.6.1.4.1.230.5.17.4.3.1.4 |
nvNsockmap OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.17.5 |
nvNsockmapMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.17.5.1 |
nvNsockmapNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.17.5.2 |
nvNsockmapTabletcpstat file. SEQUENCE OF NvNsockmapEntry .1.3.6.1.4.1.230.5.17.5.3 |
nvNsockmapEntrytcpstat record, indexed by record number NvNsockmapEntry .1.3.6.1.4.1.230.5.17.5.3.1 |
nvNsockmapIndexIndex of nsockconf recordro INTEGER .1.3.6.1.4.1.230.5.17.5.3.1.1 |
nvNsockmapOriginnsockconf recordrw Enumeration .1.3.6.1.4.1.230.5.17.5.3.1.2 |
nvNsockmapServicensockconf recordrw Enumeration .1.3.6.1.4.1.230.5.17.5.3.1.3 |
nvNsockmapMaxsessnnsockconf recordrw INTEGER .1.3.6.1.4.1.230.5.17.5.3.1.4 |
nvNsockmapNbusportnsockconf recordrw INTEGER .1.3.6.1.4.1.230.5.17.5.3.1.5 |
nvNsockmapNetaddrnsockconf recordrw DisplayString .1.3.6.1.4.1.230.5.17.5.3.1.6 |
nvNsockmapUserdatansockconf recordrw DisplayString .1.3.6.1.4.1.230.5.17.5.3.1.7 |
nvNsockmapTcpportnsockconf recordrw INTEGER .1.3.6.1.4.1.230.5.17.5.3.1.8 |
nvNsockmapIpaddrnsockconf recordrw DisplayString .1.3.6.1.4.1.230.5.17.5.3.1.9 |
nvNsockmapStatusnsockconf recordrw Enumeration .1.3.6.1.4.1.230.5.17.5.3.1.10 |
nvNsockmapTcpmsglentype of header for tcp messagerw Enumeration .1.3.6.1.4.1.230.5.17.5.3.1.11 |
nvTslotconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.17.6 |
nvTslotconfMaxRectotal number of records allowed in database file.ro INTEGER --AF .1.3.6.1.4.1.230.5.17.6.1 |
nvTslotconfNumRecnumber of records in use.ro INTEGER --AF .1.3.6.1.4.1.230.5.17.6.2 |
nvTslotconfTabletslotconf file. SEQUENCE OF NvTslotconfEntry --AF .1.3.6.1.4.1.230.5.17.6.3 |
nvTslotconfEntrytslotconf record, indexed by record number NvTslotconfEntry --AF .1.3.6.1.4.1.230.5.17.6.3.1 |
nvTslotconfIndexIndex of tslotconf recordro INTEGER --AF .1.3.6.1.4.1.230.5.17.6.3.1.1 |
nvTslotconfNameName of TSLOT instance.ro DisplayString .1.3.6.1.4.1.230.5.17.6.3.1.2 |
nvTslotconfOrigansOriginate or answer.rw Enumeration .1.3.6.1.4.1.230.5.17.6.3.1.3 |
nvTslotconfTcpprofTCP profile name.rw DisplayString .1.3.6.1.4.1.230.5.17.6.3.1.4 |
nvTslotconfReserve1OBSOLETE - removed field.ro DisplayString .1.3.6.1.4.1.230.5.17.6.3.1.5 |
nvTslotconfReserve2OBSOLETE - removed field.rw DisplayString .1.3.6.1.4.1.230.5.17.6.3.1.6 |
nvTslotconfMaxrxbufMaximum receive buffer space.rw INTEGER .1.3.6.1.4.1.230.5.17.6.3.1.7 |
nvTslotconfEnableIs this TSLOT enabled.rw Enumeration .1.3.6.1.4.1.230.5.17.6.3.1.8 |
nvTslotconfStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.17.6.3.1.9 |
nvTslotconfVersionTSLOT version number to behave as.rw Enumeration .1.3.6.1.4.1.230.5.17.6.3.1.10 |
nvTslotconfPeertsidTSLOT ID on destination side.
Only used if origans = originate.rw INTEGER .1.3.6.1.4.1.230.5.17.6.3.1.11 |
nvTslotconfPeeripadrIP address if destination machine.
Only used if origans = originate.rw DisplayString .1.3.6.1.4.1.230.5.17.6.3.1.12 |
nvTslotstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.17.7 |
nvTslotstatMaxRectotal number of records allowed in database file.ro INTEGER --AF .1.3.6.1.4.1.230.5.17.7.1 |
nvTslotstatNumRecnumber of records in use.ro INTEGER --AF .1.3.6.1.4.1.230.5.17.7.2 |
nvTslotstatTabletslotstat file. SEQUENCE OF NvTslotstatEntry --AF .1.3.6.1.4.1.230.5.17.7.3 |
nvTslotstatEntrytslotstat record, indexed by record number NvTslotstatEntry --AF .1.3.6.1.4.1.230.5.17.7.3.1 |
nvTslotstatIndexIndex of tslotconf recordro INTEGER --AF .1.3.6.1.4.1.230.5.17.7.3.1.1 |
nvTslotstatNameName of TSLOT instance.ro DisplayString .1.3.6.1.4.1.230.5.17.7.3.1.2 |
nvTslotstatServiceConnected component id.ro INTEGER --AF .1.3.6.1.4.1.230.5.17.7.3.1.3 |
nvTslotstatServiceidService instance name.ro DisplayString .1.3.6.1.4.1.230.5.17.7.3.1.4 |
nvTslotstatOpstateTSLOT instance operational state.ro Enumeration .1.3.6.1.4.1.230.5.17.7.3.1.5 |
nvTslotstatRemipaddrRemote machine IP address.
This field is a 15 byte character string in IP dotted address format.ro DisplayString .1.3.6.1.4.1.230.5.17.7.3.1.6 |
nvTslotstatRemtsidTSLOT ID on remote machine.ro INTEGER --AF .1.3.6.1.4.1.230.5.17.7.3.1.7 |
nvTslotstatTcpcnTCPCNSTAT file record number.ro INTEGER --AF .1.3.6.1.4.1.230.5.17.7.3.1.8 |
nvTslotstatNumconNumber of TCP connections.ro INTEGER --AF .1.3.6.1.4.1.230.5.17.7.3.1.9 |
nvTslotstatNumfailcnNumber of failed attempts at TCP connection.ro INTEGER --AF .1.3.6.1.4.1.230.5.17.7.3.1.10 |
nvTslotstatTotrxfrmTotal number of received frames.ro INTEGER --AF .1.3.6.1.4.1.230.5.17.7.3.1.11 |
nvTslotstatTottxfrmTotal number of transmitted frames.ro INTEGER --AF .1.3.6.1.4.1.230.5.17.7.3.1.12 |
nvTslotstatCurtxfrmTotal number of transmitted frames on current TCP connection.ro INTEGER --AF .1.3.6.1.4.1.230.5.17.7.3.1.13 |
nvTslotstatCurrxfrmTotal number of received frames on current TCP connection.ro INTEGER --AF .1.3.6.1.4.1.230.5.17.7.3.1.14 |
nvTslotstatCurdrprxNumber of dropped frames due to ins buffer space.ro INTEGER --AF .1.3.6.1.4.1.230.5.17.7.3.1.15 |
nvTslotstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.17.7.3.1.16 |
nvTcpprof OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.17.8 |
nvTcpprofMaxRectotal number of records allowed in database file.ro INTEGER --AF .1.3.6.1.4.1.230.5.17.8.1 |
nvTcpprofNumRecnumber of records in use.ro INTEGER --AF .1.3.6.1.4.1.230.5.17.8.2 |
nvTcpprofTabletcpprof file. SEQUENCE OF NvTcpprofEntry --AF .1.3.6.1.4.1.230.5.17.8.3 |
nvTcpprofEntrytcpprof record, indexed by record number NvTcpprofEntry --AF .1.3.6.1.4.1.230.5.17.8.3.1 |
nvTcpprofIndexIndex of tslotconf recordro INTEGER --AF .1.3.6.1.4.1.230.5.17.8.3.1.1 |
nvTcpprofProfnameNmae of TCP profile.rw DisplayString .1.3.6.1.4.1.230.5.17.8.3.1.2 |
nvTcpprofKeepidleIdle time in seconds before keepalive probe.rw INTEGER --AF .1.3.6.1.4.1.230.5.17.8.3.1.3 |
nvTcpprofKeepprbsNumber of unanswered probes before reset.rw INTEGER --AF .1.3.6.1.4.1.230.5.17.8.3.1.4 |
nvTcpprofKeepintvlInterval in seconds between keppalive probes.rw INTEGER --AF .1.3.6.1.4.1.230.5.17.8.3.1.5 |
nvTcpprofStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.17.8.3.1.6 |
nevadaFtp OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.18 |
nvFtpconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.18.1 |
nvFtpconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.18.1.1 |
nvFtpconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.18.1.2 |
nvFtpconfTableftpconf file. SEQUENCE OF NvFtpconfEntry .1.3.6.1.4.1.230.5.18.1.3 |
nvFtpconfEntryftpconf record, indexed by record number NvFtpconfEntry .1.3.6.1.4.1.230.5.18.1.3.1 |
nvFtpconfIndexIndex of ftpconf recordro INTEGER .1.3.6.1.4.1.230.5.18.1.3.1.1 |
nvFtpconfReqaddrFTPD remote client IP address.rw DisplayString .1.3.6.1.4.1.230.5.18.1.3.1.2 |
nvFtpconfUsernameFTPD username.rw DisplayString .1.3.6.1.4.1.230.5.18.1.3.1.3 |
nvFtpconfPasswordFTPD user password.rw DisplayString .1.3.6.1.4.1.230.5.18.1.3.1.4 |
nvFtpconfTimeoutFTPD user inactivity timer.rw INTEGER .1.3.6.1.4.1.230.5.18.1.3.1.5 |
nvFtpconfStatusOperation status. Add the record to the table (valid) or delete
the record from the table (invalid).
Reqaddr MUST be set to a valid value before
adding new record (setting Status to valid).rw Enumeration .1.3.6.1.4.1.230.5.18.1.3.1.10 |
nvFtpstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.18.2 |
nvFtpstatIndexIndex of ftpconf recordro INTEGER .1.3.6.1.4.1.230.5.18.2.1 |
nvFtpstatServaddrserver FTP host IP address.ro DisplayString .1.3.6.1.4.1.230.5.18.2.2 |
nvFtpstatNumreqsnumber of connection requested.ro Counter .1.3.6.1.4.1.230.5.18.2.3 |
nvFtpstatConnectsnumber of successful connections.ro Counter .1.3.6.1.4.1.230.5.18.2.4 |
nvFtpstatConnfailsnumber of connect request failures.ro Counter .1.3.6.1.4.1.230.5.18.2.5 |
nvFtpstatTotalfirvsnumber of files server received.ro Counter .1.3.6.1.4.1.230.5.18.2.6 |
nvFtpstatTotalfisdsnumber of files server sent.ro Counter .1.3.6.1.4.1.230.5.18.2.7 |
nvFtpstatTotalkbyrvsnumber of Kbytes server received.ro Counter .1.3.6.1.4.1.230.5.18.2.8 |
nvFtpstatTotalkbysdsnumber of Kbytes server sent.ro Counter .1.3.6.1.4.1.230.5.18.2.9 |
nvFtpstatClientaddrclient FTP host IP address.ro DisplayString .1.3.6.1.4.1.230.5.18.2.10 |
nvFtpstatCurrstatcurrent FTPD status.ro Enumeration .1.3.6.1.4.1.230.5.18.2.11 |
nvFtpstatCommstatlast command status.ro Enumeration .1.3.6.1.4.1.230.5.18.2.12 |
nvFtpstatTotalsucstotal number of commands executed successfully.ro Counter .1.3.6.1.4.1.230.5.18.2.13 |
nvFtpstatTotalfalstotal number of commands executed with failure.ro Counter .1.3.6.1.4.1.230.5.18.2.14 |
nvFtpstatTotalerrstotal number of unsupported commands.ro Counter .1.3.6.1.4.1.230.5.18.2.15 |
nvFtpstatCurrfirecstotal number of files current user received.ro Counter .1.3.6.1.4.1.230.5.18.2.16 |
nvFtpstatCurrfisndstotal number of files current user sent.ro Counter .1.3.6.1.4.1.230.5.18.2.17 |
nvFtpstatCurrkbyrvstotal number of Kbytes current user server sent.ro Counter .1.3.6.1.4.1.230.5.18.2.18 |
nvFtpstatCurrkbysdstotal number of Kbytes current user server received.ro Counter .1.3.6.1.4.1.230.5.18.2.19 |
nvFtpstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.18.2.20 |
nevadaTelnet OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.20 |
nvTnconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.20.1 |
nvTnconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.20.1.1 |
nvTnconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.20.1.2 |
nvTnconfTableNevada Telnet config file. SEQUENCE OF NvTnconfEntry .1.3.6.1.4.1.230.5.20.1.3 |
nvTnconfEntryNevada node Telnet record. NvTnconfEntry .1.3.6.1.4.1.230.5.20.1.3.1 |
nvTnconfIndexIndex of Telenet conf recordro INTEGER .1.3.6.1.4.1.230.5.20.1.3.1.1 |
nvTnconfNumSessnumber of simultaneous sessionsro INTEGER .1.3.6.1.4.1.230.5.20.1.3.1.2 |
nvTnconfDeftnclassDefault telnet classrw DisplayString .1.3.6.1.4.1.230.5.20.1.3.1.3 |
nvTnconfDefiticlassDefault iti classrw DisplayString .1.3.6.1.4.1.230.5.20.1.3.1.4 |
nvTnconfDefminbspacenumber of simultaneous sessionsrw INTEGER .1.3.6.1.4.1.230.5.20.1.3.1.5 |
nvTnconfDefmaxbspacenumber of simultaneous sessionsrw INTEGER .1.3.6.1.4.1.230.5.20.1.3.1.6 |
nvTnclass OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.20.2 |
nvTnclassMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.20.2.1 |
nvTnclassNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.20.2.2 |
nvTnclassTableNevada Telnet class file. SEQUENCE OF NvTnclassEntry .1.3.6.1.4.1.230.5.20.2.3 |
nvTnclassEntryNevada node Telnet record. NvTnclassEntry .1.3.6.1.4.1.230.5.20.2.3.1 |
nvTnclassIndexIndex of Telenet class recordro INTEGER .1.3.6.1.4.1.230.5.20.2.3.1.1 |
nvTnclassClassnameTelnet classnamerw DisplayString .1.3.6.1.4.1.230.5.20.2.3.1.2 |
nvTnclassAobreakTelnet abort cmd issues breakrw Enumeration .1.3.6.1.4.1.230.5.20.2.3.1.4 |
nvTnclassIpcmdTelnet interrupt process cmdrw Enumeration .1.3.6.1.4.1.230.5.20.2.3.1.5 |
nvTnclassGoaheadTelnet suppress/send Go Ahead cmdrw Enumeration .1.3.6.1.4.1.230.5.20.2.3.1.7 |
nvTnclassStatusOperation status of the record. Use valid to add
record to database file and invalid to delete
record from database file.rw Enumeration .1.3.6.1.4.1.230.5.20.2.3.1.9 |
nvTnmap OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.20.3 |
nvTnmapMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.20.3.1 |
nvTnmapNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.20.3.2 |
nvTnmapTableNevada Telnet map file. SEQUENCE OF NvTnmapEntry .1.3.6.1.4.1.230.5.20.3.3 |
nvTnmapEntryNevada node Telnet map record. NvTnmapEntry .1.3.6.1.4.1.230.5.20.3.3.1 |
nvTnmapIndexIndex of Telenet map recordro INTEGER .1.3.6.1.4.1.230.5.20.3.3.1.1 |
nvTnmapPortnumTelnet portnumberrw INTEGER .1.3.6.1.4.1.230.5.20.3.3.1.2 |
nvTnmapTnclassTelnet classnamerw DisplayString .1.3.6.1.4.1.230.5.20.3.3.1.3 |
nvTnmapIticlassTelnet iti classnamerw DisplayString .1.3.6.1.4.1.230.5.20.3.3.1.4 |
nvTnmapStatusOperation status of the record. Use valid to add
record to database file and invalid to delete
record from database file.rw Enumeration .1.3.6.1.4.1.230.5.20.3.3.1.5 |
nvTnstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.20.4 |
nvTnstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.20.4.1 |
nvTnstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.20.4.2 |
nvTnstatTableNevada Telnet stat file. SEQUENCE OF NvTnstatEntry .1.3.6.1.4.1.230.5.20.4.3 |
nvTnstatEntryNevada node Telnet stat record. NvTnstatEntry .1.3.6.1.4.1.230.5.20.4.3.1 |
nvTnstatIndexIndex of Telenet stat recordro INTEGER .1.3.6.1.4.1.230.5.20.4.3.1.1 |
nvTnstatPortnumTelnet portnumber in usero INTEGER .1.3.6.1.4.1.230.5.20.4.3.1.2 |
nvTnstatStatusTelnet call statusro Enumeration .1.3.6.1.4.1.230.5.20.4.3.1.3 |
nvTnstatModeTelnet mode in usero Enumeration .1.3.6.1.4.1.230.5.20.4.3.1.4 |
nvTnstatLastCmdTelnet last cmd receivedro DisplayString .1.3.6.1.4.1.230.5.20.4.3.1.5 |
nvTnstatOptionsTelnet active optionsro DisplayString .1.3.6.1.4.1.230.5.20.4.3.1.6 |
nvTnstatClientAddrAddress of the Client.ro DisplayString .1.3.6.1.4.1.230.5.20.4.3.1.7 |
nvTncconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.20.5 |
nvTncconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.20.5.1 |
nvTncconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.20.5.2 |
nvTncconfTableNevada Telnet cconf file. SEQUENCE OF NvTncconfEntry .1.3.6.1.4.1.230.5.20.5.3 |
nvTncconfEntrynevada node Tncconf record. NvTncconfEntry .1.3.6.1.4.1.230.5.20.5.3.1 |
nvTncconfIndexIndex of Telnet Client recordro INTEGER .1.3.6.1.4.1.230.5.20.5.3.1.1 |
nvTncconfNumSessnumber of simultaneous sessions (numSess)ro INTEGER .1.3.6.1.4.1.230.5.20.5.3.1.2 |
nvTncconfX3parmsstring of X.3 params to send at start (x3parms)rw INTEGER .1.3.6.1.4.1.230.5.20.5.3.1.3 |
nvTncconfSetactallow user to perform set actions (setact)rw Enumeration .1.3.6.1.4.1.230.5.20.5.3.1.4 |
nvTncconfIdletimforwarding timer used in character at a time (idletim)rw INTEGER .1.3.6.1.4.1.230.5.20.5.3.1.5 |
nvTncconfEscapedecimal number of character to use for escape (escape)rw INTEGER .1.3.6.1.4.1.230.5.20.5.3.1.6 |
nvTncconfEchodecimal number of character to use for echo (echo)rw INTEGER .1.3.6.1.4.1.230.5.20.5.3.1.7 |
nvTncconfInterruptdecimal number of character to use for interrupt (interrupt)rw INTEGER .1.3.6.1.4.1.230.5.20.5.3.1.8 |
nvTncconfQuitdecimal number of character to use for quit (quit)rw INTEGER .1.3.6.1.4.1.230.5.20.5.3.1.9 |
nvTncconfFoutdecimal number of character to use for flushoutput (fout)rw INTEGER .1.3.6.1.4.1.230.5.20.5.3.1.10 |
nvTncconfErasedecimal number of character to use for erase (erase)rw INTEGER .1.3.6.1.4.1.230.5.20.5.3.1.11 |
nvTncconfKilldecimal number of character to use for kill (kill)rw INTEGER .1.3.6.1.4.1.230.5.20.5.3.1.12 |
nvTncconfAytdecimal number of character to use for ayt (ayt)rw INTEGER .1.3.6.1.4.1.230.5.20.5.3.1.13 |
nvTncconfSuspenddecimal number of character to use for suspend (suspend)rw INTEGER .1.3.6.1.4.1.230.5.20.5.3.1.14 |
nvTncconfDnsaddrDnsaddrrw DisplayString .1.3.6.1.4.1.230.5.20.5.3.1.15 |
nvTncconfStatusOperation status of the record. Use valid to add
record to database file and invalid to delete
record from database file.rw Enumeration .1.3.6.1.4.1.230.5.20.5.3.1.16 |
nvTncmap OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.20.6 |
nvTncmapMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.20.6.1 |
nvTncmapNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.20.6.2 |
nvTncmapTableNevada Telnet cstat file. SEQUENCE OF NvTncmapEntry .1.3.6.1.4.1.230.5.20.6.3 |
nvTncmapEntryNevada node Telnet cstat record. NvTncmapEntry .1.3.6.1.4.1.230.5.20.6.3.1 |
nvTncmapIndexIndex of Telnet Client map recordro INTEGER .1.3.6.1.4.1.230.5.20.6.3.1.1 |
nvTncmapNetadrw DisplayString .1.3.6.1.4.1.230.5.20.6.3.1.2 |
nvTncmapUsdatarw DisplayString .1.3.6.1.4.1.230.5.20.6.3.1.3 |
nvTncmapIpaddrrw DisplayString .1.3.6.1.4.1.230.5.20.6.3.1.4 |
nvTncmapTcppnrw DisplayString .1.3.6.1.4.1.230.5.20.6.3.1.5 |
nvTncmapX3parmsrw INTEGER .1.3.6.1.4.1.230.5.20.6.3.1.6 |
nvTncmapModerw Enumeration .1.3.6.1.4.1.230.5.20.6.3.1.7 |
nvTncmapStatusrw Enumeration .1.3.6.1.4.1.230.5.20.6.3.1.8 |
nvTncmapSecuresecurity opreation enabledrw Enumeration .1.3.6.1.4.1.230.5.20.6.3.1.9 |
nvTncstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.20.7 |
nvTncstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.20.7.1 |
nvTncstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.20.7.2 |
nvTncstatTableNevada Telnet cstat file. SEQUENCE OF NvTncstatEntry .1.3.6.1.4.1.230.5.20.7.3 |
nvTncstatEntryNevada node Telnet cstat record. NvTncstatEntry .1.3.6.1.4.1.230.5.20.7.3.1 |
nvTncstatIndexIndex of Telnet Client stat recordro INTEGER .1.3.6.1.4.1.230.5.20.7.3.1.1 |
nvTncstatSessnumthe number of the sessionro INTEGER .1.3.6.1.4.1.230.5.20.7.3.1.2 |
nvTncstatStatusCall statusro Enumeration .1.3.6.1.4.1.230.5.20.7.3.1.3 |
nvTncstatDnsidxdnsindexro INTEGER .1.3.6.1.4.1.230.5.20.7.3.1.4 |
nvTncstatCalladdrx121 address calling TELNET Clientro DisplayString .1.3.6.1.4.1.230.5.20.7.3.1.5 |
nvTncstatCalldatacall user dataro DisplayString .1.3.6.1.4.1.230.5.20.7.3.1.6 |
nvTncstatIpaddrip address connected toro DisplayString .1.3.6.1.4.1.230.5.20.7.3.1.7 |
nvTncstatPortnumPort number connected toro INTEGER .1.3.6.1.4.1.230.5.20.7.3.1.8 |
nvTncstatModemode in usero Enumeration .1.3.6.1.4.1.230.5.20.7.3.1.9 |
nvTncstatX29errlast X29 error rcvd from 3XPADro INTEGER .1.3.6.1.4.1.230.5.20.7.3.1.10 |
nevadaRadius OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.40 |
nvRadconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.40.1 |
nvRadconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.40.1.1 |
nvRadconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.40.1.2 |
nvRadconfTableradconf file. SEQUENCE OF NvRadconfEntry .1.3.6.1.4.1.230.5.40.1.3 |
nvRadconfEntryradconf record, indexed by record number NvRadconfEntry .1.3.6.1.4.1.230.5.40.1.3.1 |
nvRadconfIndexIndex of radconf recordro INTEGER .1.3.6.1.4.1.230.5.40.1.3.1.1 |
nvRadconfNameNevada name.rw DisplayString .1.3.6.1.4.1.230.5.40.1.3.1.2 |
nvRadconfSecretsecret for accounting.rw DisplayString .1.3.6.1.4.1.230.5.40.1.3.1.3 |
nvRadconfN1retry counter.rw INTEGER .1.3.6.1.4.1.230.5.40.1.3.1.4 |
nvRadconfT1times between attempts.rw INTEGER .1.3.6.1.4.1.230.5.40.1.3.1.5 |
nvRadconfAcctradius accounting.rw Enumeration .1.3.6.1.4.1.230.5.40.1.3.1.6 |
nvRadconfNumdigitstrailing port digits.rw INTEGER .1.3.6.1.4.1.230.5.40.1.3.1.7 |
nvRadconfAuth1IP address primary auth server.rw DisplayString .1.3.6.1.4.1.230.5.40.1.3.1.8 |
nvRadconfAuth2IP address secondary auth server.rw DisplayString .1.3.6.1.4.1.230.5.40.1.3.1.10 |
nvRadconfAuth3IP address tertiary auth server.rw DisplayString .1.3.6.1.4.1.230.5.40.1.3.1.12 |
nvRadconfAcct1IP address primary accounting.rw DisplayString .1.3.6.1.4.1.230.5.40.1.3.1.14 |
nvRadconfAcct2IP address secondary accounting.rw DisplayString .1.3.6.1.4.1.230.5.40.1.3.1.16 |
nvRadconfAcct3IP address tertiary accounting.rw DisplayString .1.3.6.1.4.1.230.5.40.1.3.1.18 |
nvRadconfAcctauthauthorizarion encoding.rw Enumeration .1.3.6.1.4.1.230.5.40.1.3.1.20 |
nvRadconfAuth1portauthserver port1 .rw INTEGER --AF .1.3.6.1.4.1.230.5.40.1.3.1.21 |
nvRadconfAuth2portauthserver port2 .rw INTEGER --AF .1.3.6.1.4.1.230.5.40.1.3.1.22 |
nvRadconfAuth3portauthserver port3 .rw INTEGER --AF .1.3.6.1.4.1.230.5.40.1.3.1.23 |
nvRadconfAcct1portaccount server port1 .rw INTEGER --AF .1.3.6.1.4.1.230.5.40.1.3.1.24 |
nvRadconfAcct2portaccount server port2 .rw INTEGER --AF .1.3.6.1.4.1.230.5.40.1.3.1.25 |
nvRadconfAcct3portaccount server port3 .rw INTEGER --AF .1.3.6.1.4.1.230.5.40.1.3.1.26 |
nvRadconfAttrchkStrict attribute checking.rw Enumeration .1.3.6.1.4.1.230.5.40.1.3.1.27 |
nvRadconfDnsatt1attribute code for primary DNS serverrw INTEGER .1.3.6.1.4.1.230.5.40.1.3.1.28 |
nvRadconfDnsatt2attribute code for secondary DNS serverrw INTEGER .1.3.6.1.4.1.230.5.40.1.3.1.29 |
nvRadconfNbnsatt1attribute code for primary NBNS serverrw INTEGER .1.3.6.1.4.1.230.5.40.1.3.1.30 |
nvRadconfStatusOperation status. Add the record to the table (valid) or delete
the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.40.1.3.1.31 |
nvRadconfNbnsatt2attribute code for secondary NBNS serverrw INTEGER .1.3.6.1.4.1.230.5.40.1.3.1.32 |
nvRaduser OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.40.2 |
nvRaduserMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.40.2.1 |
nvRaduserNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.40.2.2 |
nvRaduserTableraduser file. SEQUENCE OF NvRaduserEntry .1.3.6.1.4.1.230.5.40.2.3 |
nvRaduserEntryraduser record, indexed by record number NvRaduserEntry .1.3.6.1.4.1.230.5.40.2.3.1 |
nvRaduserIndexIndex of raduser recordro INTEGER .1.3.6.1.4.1.230.5.40.2.3.1.1 |
nvRaduserUsernameuser name.rw DisplayString .1.3.6.1.4.1.230.5.40.2.3.1.2 |
nvRaduserPasswduser password.rw DisplayString .1.3.6.1.4.1.230.5.40.2.3.1.3 |
nvRaduserRespmsgstringid of response message.rw INTEGER .1.3.6.1.4.1.230.5.40.2.3.1.4 |
nvRaduserStatusOperation status. Add the record to the table (valid) or delete
the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.40.2.3.1.15 |
nvRadcstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.40.3 |
nvRadcstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.40.3.1 |
nvRadcstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.40.3.2 |
nvRadcstatTableradcstat file. SEQUENCE OF NvRadcstatEntry .1.3.6.1.4.1.230.5.40.3.3 |
nvRadcstatEntryradcstat record, indexed by record number NvRadcstatEntry .1.3.6.1.4.1.230.5.40.3.3.1 |
nvRadcstatIndexIndex of radcstat recordro INTEGER .1.3.6.1.4.1.230.5.40.3.3.1.1 |
nvRadcstatRadAdminSradius admin status.ro Enumeration .1.3.6.1.4.1.230.5.40.3.3.1.2 |
nvRadcstatRadcOperSradius operation status.ro Enumeration .1.3.6.1.4.1.230.5.40.3.3.1.3 |
nvRadcstatNAuthsnumber of auth attempts.ro DisplayString .1.3.6.1.4.1.230.5.40.3.3.1.4 |
nvRadcstatNAuthLoclnumber of local authorizations.ro DisplayString .1.3.6.1.4.1.230.5.40.3.3.1.5 |
nvRadcstatNAuthLostnumber of authorization lost.ro DisplayString .1.3.6.1.4.1.230.5.40.3.3.1.6 |
nvRadcstatNAuthRtrynumber of authentication retr.ro DisplayString .1.3.6.1.4.1.230.5.40.3.3.1.7 |
nvRadcstatNAuth1Accnumber of auth accepts by auth1.ro DisplayString .1.3.6.1.4.1.230.5.40.3.3.1.8 |
nvRadcstatNAuth1Rejnumber of auth rejects by auth1.ro DisplayString .1.3.6.1.4.1.230.5.40.3.3.1.9 |
nvRadcstatNAuth2Accnumber of auth accepts by auth2.ro DisplayString .1.3.6.1.4.1.230.5.40.3.3.1.10 |
nvRadcstatNAuth2Rejnumber of auth rejects by auth2.ro DisplayString .1.3.6.1.4.1.230.5.40.3.3.1.11 |
nvRadcstatNAuth3Accnumber of auth accepts by auth3.ro DisplayString .1.3.6.1.4.1.230.5.40.3.3.1.12 |
nvRadcstatNAuth3Rejnumber of auth rejects by auth3.ro DisplayString .1.3.6.1.4.1.230.5.40.3.3.1.13 |
nvRadcstatNAcctnumber of accounting msgs attempts.ro DisplayString .1.3.6.1.4.1.230.5.40.3.3.1.14 |
nvRadcstatNAcctLostnumber of accounting records lost.ro DisplayString .1.3.6.1.4.1.230.5.40.3.3.1.15 |
nvRadcstatNAcctRtrynumber of accounting msgs retry.ro DisplayString .1.3.6.1.4.1.230.5.40.3.3.1.16 |
nvRadcstatNAcct1number of accounting msgs acct1.ro DisplayString .1.3.6.1.4.1.230.5.40.3.3.1.17 |
nvRadcstatNAcct2number of accounting msgs acct2.ro DisplayString .1.3.6.1.4.1.230.5.40.3.3.1.18 |
nvRadcstatNAcct3number of accounting msgs acct3.ro DisplayString .1.3.6.1.4.1.230.5.40.3.3.1.19 |
nvRadcstatNSilentnum of silent discardsro DisplayString .1.3.6.1.4.1.230.5.40.3.3.1.20 |
nvRadcstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.40.3.3.1.21 |
nvRadustat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.40.4 |
nvRadustatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.40.4.1 |
nvRadustatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.40.4.2 |
nvRadustatTableradustat file. SEQUENCE OF NvRadustatEntry .1.3.6.1.4.1.230.5.40.4.3 |
nvRadustatEntryradustat record, indexed by record number NvRadustatEntry .1.3.6.1.4.1.230.5.40.4.3.1 |
nvRadustatIndexIndex of radustat recordro INTEGER .1.3.6.1.4.1.230.5.40.4.3.1.1 |
nvRadustatRaduOperSUser operation/session status.ro Enumeration .1.3.6.1.4.1.230.5.40.4.3.1.2 |
nvRadustatSessionIdaccounting session-id name.ro DisplayString .1.3.6.1.4.1.230.5.40.4.3.1.3 |
nvRadustatUserIduser/host name of requestor.ro DisplayString .1.3.6.1.4.1.230.5.40.4.3.1.4 |
nvRadustatNasPortCalled address.ro DisplayString .1.3.6.1.4.1.230.5.40.4.3.1.5 |
nvRadustatNasIpAddrNAS IP address.ro DisplayString .1.3.6.1.4.1.230.5.40.4.3.1.6 |
nvRadustatFrmIpaddrFramed IP address.ro DisplayString .1.3.6.1.4.1.230.5.40.4.3.1.7 |
nvRadustatFrmIpMaskFramed IP mask.ro DisplayString .1.3.6.1.4.1.230.5.40.4.3.1.8 |
nvRadustatStatestate.ro DisplayString .1.3.6.1.4.1.230.5.40.4.3.1.13 |
nvRadustatClassclass.ro DisplayString .1.3.6.1.4.1.230.5.40.4.3.1.14 |
nvRadustatSTypeService type.ro Enumeration .1.3.6.1.4.1.230.5.40.4.3.1.15 |
nvRadustatFrmProtoFramed protocol type.ro Enumeration .1.3.6.1.4.1.230.5.40.4.3.1.17 |
nvRadustatFrmRtingFramed routing attribute type.ro Enumeration .1.3.6.1.4.1.230.5.40.4.3.1.18 |
nvRadustatSTimeSeconds the call was active.ro INTEGER .1.3.6.1.4.1.230.5.40.4.3.1.19 |
nvRadustatFrmMtuFramed mtu.ro INTEGER .1.3.6.1.4.1.230.5.40.4.3.1.20 |
nvRadustatFrmRtFramed route.ro INTEGER .1.3.6.1.4.1.230.5.40.4.3.1.21 |
nvRadustatSTimeoutSession timeout.ro INTEGER .1.3.6.1.4.1.230.5.40.4.3.1.22 |
nvRadustatITimeoutIdle timeout.ro INTEGER .1.3.6.1.4.1.230.5.40.4.3.1.23 |
nvRadustatDFilterData filters.ro INTEGER .1.3.6.1.4.1.230.5.40.4.3.1.24 |
nvRadustatReqIdRequest ID of outstanding radius msgs.ro DisplayString .1.3.6.1.4.1.230.5.40.4.3.1.25 |
nvRadustatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.40.4.3.1.26 |
nevadaSnmp OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.45 |
nvSnmpconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.45.1 |
nvSnmpconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.45.1.1 |
nvSnmpconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.45.1.2 |
nvSnmpconfTableSnmpconf file. SEQUENCE OF NvSnmpconfEntry .1.3.6.1.4.1.230.5.45.1.3 |
nvSnmpconfEntrySnmpconf record. NvSnmpconfEntry .1.3.6.1.4.1.230.5.45.1.3.1 |
nvSnmpconfIndexIndex of nvSnmpconf recordro INTEGER .1.3.6.1.4.1.230.5.45.1.3.1.1 |
nvSnmpconflocationLocationrw DisplayString .1.3.6.1.4.1.230.5.45.1.3.1.2 |
nvSnmpconfcontactcontactrw DisplayString .1.3.6.1.4.1.230.5.45.1.3.1.3 |
nvSnmpconfsysnamesysnamerw DisplayString .1.3.6.1.4.1.230.5.45.1.3.1.4 |
nvSnmpconfauthenauthentication trap yes(1)/no(2)rw Enumeration .1.3.6.1.4.1.230.5.45.1.3.1.5 |
nvSnmpconfstatusOperation status. Add the record to the table (valid) or delete
the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.45.1.3.1.6 |
nvSnmpmgr OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.45.2 |
nvSnmpmgrMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.45.2.1 |
nvSnmpmgrNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.45.2.2 |
nvSnmpmgrTableSnmpmgr file. SEQUENCE OF NvSnmpmgrEntry .1.3.6.1.4.1.230.5.45.2.3 |
nvSnmpmgrEntrySnmpmgr record. NvSnmpmgrEntry .1.3.6.1.4.1.230.5.45.2.3.1 |
nvSnmpmgrIndexIndex of nvSnmpmgr recordro INTEGER .1.3.6.1.4.1.230.5.45.2.3.1.1 |
nvSnmpmgrIpIP addressrw DisplayString .1.3.6.1.4.1.230.5.45.2.3.1.2 |
nvSnmpmgrCommcommunityrw DisplayString .1.3.6.1.4.1.230.5.45.2.3.1.3 |
nvSnmpmgrAccPrivAccess privrw Enumeration .1.3.6.1.4.1.230.5.45.2.3.1.4 |
nvSnmpmgrSndTrapSend traprw Enumeration .1.3.6.1.4.1.230.5.45.2.3.1.5 |
nvSnmpmgrstatusOperation status. Add the record to the table (valid) or delete
the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.45.2.3.1.6 |
nevadaApacs OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.50 |
nvApacsconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.50.1 |
nvApacsconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.50.1.1 |
nvApacsconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.50.1.2 |
nvApacsconfTableApacsconf file. SEQUENCE OF NvApacsconfEntry .1.3.6.1.4.1.230.5.50.1.3 |
nvApacsconfEntryApacsconf record. NvApacsconfEntry .1.3.6.1.4.1.230.5.50.1.3.1 |
nvApacsconfIndexIndex of Apacsconf recordro INTEGER .1.3.6.1.4.1.230.5.50.1.3.1.1 |
nvApacsconfNodenameFor display purpose only Not used by Apacs softwarerw DisplayString .1.3.6.1.4.1.230.5.50.1.3.1.2 |
nvApacsconfSitenameFor display purpose only Not used by Apacs software
other than in generating alarmsrw DisplayString .1.3.6.1.4.1.230.5.50.1.3.1.3 |
nvApacsconfHelpphoneFor display purpose in INF help message.
Phone number of cardway help deskrw DisplayString .1.3.6.1.4.1.230.5.50.1.3.1.4 |
nvApacsconfReserve1OBSOLETE - removed field.ro DisplayString .1.3.6.1.4.1.230.5.50.1.3.1.5 |
nvApacsconfBillingT1Call duration timer limit for billing ( in 100th secs )
Default value of 500rw INTEGER .1.3.6.1.4.1.230.5.50.1.3.1.6 |
nvApacsconfBillingT2Call duration timer limit for billing ( in 100th secs )
Default value of 1000rw INTEGER .1.3.6.1.4.1.230.5.50.1.3.1.7 |
nvApacsconfBillingT3Call duration timer limit for billing ( in 100th secs )
Default value of 1500rw INTEGER .1.3.6.1.4.1.230.5.50.1.3.1.8 |
nvApacsconfBillingT4Call duration timer limit for billing ( in 100th secs )
Default value of 2000rw INTEGER .1.3.6.1.4.1.230.5.50.1.3.1.9 |
nvApacsconfBillingT5Call duration timer limit for billing ( in 100th secs )
Default value of 3000rw INTEGER .1.3.6.1.4.1.230.5.50.1.3.1.10 |
nvApacsconfBillingT6Call duration timer limit for billing ( in 100th secs )
Default value of 6000rw INTEGER .1.3.6.1.4.1.230.5.50.1.3.1.11 |
nvApacsstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.50.5 |
nvApacsstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.50.5.1 |
nvApacsstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.50.5.2 |
nvApacsstatTableApacsstat file. SEQUENCE OF NvApacsstatEntry .1.3.6.1.4.1.230.5.50.5.3 |
nvApacsstatEntryApacsstat record. NvApacsstatEntry .1.3.6.1.4.1.230.5.50.5.3.1 |
nvApacsstatIndexIndexro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.1 |
nvApacsstatNidlenumber of iti ports in idle statero INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.2 |
nvApacsstatNxidlero INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.3 |
nvApacsstatCursimulro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.4 |
nvApacsstatResetdatero DisplayString .1.3.6.1.4.1.230.5.50.5.3.1.5 |
nvApacsstatTcallsro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.6 |
nvApacsstatTxnaksro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.7 |
nvApacsstatRxnaksro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.8 |
nvApacsstatTxbytesro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.9 |
nvApacsstatRxbytesro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.10 |
nvApacsstatCallrcvro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.11 |
nvApacsstatFailnegro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.12 |
nvApacsstatNoadrblkro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.13 |
nvApacsstatInvadrblkro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.14 |
nvApacsstatNonuamtchro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.15 |
nvApacsstatTrmdscsuro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.16 |
nvApacsstatLoscarsuro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.17 |
nvApacsstatGdadrblksro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.18 |
nvApacsstatX25clrcipro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.19 |
nvApacsstatActtmocipro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.20 |
nvApacsstatTrmdsccipro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.21 |
nvApacsstatLoscarcipro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.22 |
nvApacsstatLrcerrcipro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.23 |
nvApacsstatTmoerrcipro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.24 |
nvApacsstatX25connsro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.25 |
nvApacsstatX25clrdatro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.26 |
nvApacsstatActtmodatro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.27 |
nvApacsstatTrmdscdatro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.28 |
nvApacsstatLoscardatro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.29 |
nvApacsstatDscnoackro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.30 |
nvApacsstatDscexcnakro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.31 |
nvApacsstatLrcerrdatro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.32 |
nvApacsstatBdhostblkro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.33 |
nvApacsstatTrmnodatro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.34 |
nvApacsstatHostnodatro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.35 |
nvApacsstatTrmnoackro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.36 |
nvApacsstatRetrntmoro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.37 |
nvApacsstatRetrnnakro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.38 |
nvApacsstatTxenqsro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.39 |
nvApacsstatDleeotsntro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.40 |
nvApacsstatDleeotrcvro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.41 |
nvApacsstatUnxhstclrro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.42 |
nvApacsstatNwadrblksro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.43 |
nvApacsstatRjadrblksro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.44 |
nvApacsstatNonuaentrro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.45 |
nvApacsstatMaxsimulro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.46 |
nvApacsstatN300bdro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.47 |
nvApacsstatN1200bdro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.48 |
nvApacsstatN2400bdro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.49 |
nvApacsstatN9600bdro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.50 |
nvApacsstatN14400bdro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.51 |
nvApacsstatN28800bdro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.52 |
nvApacsstatSimultimeWhen maxsimul reached.ro DisplayString .1.3.6.1.4.1.230.5.50.5.3.1.53 |
nvApacsstatParerrsuro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.54 |
nvApacsstatParerrcipro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.55 |
nvApacsstatParerrdatro INTEGER .1.3.6.1.4.1.230.5.50.5.3.1.56 |
nvApacsstatDtresetDate & Time statistics last reset.ro DisplayString .1.3.6.1.4.1.230.5.50.5.3.1.57 |
nvBillconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.50.6 |
nvBillconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.50.6.1 |
nvBillconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.50.6.2 |
nvBillconf1TableBillconf file. SEQUENCE OF NvBillconf1Entry .1.3.6.1.4.1.230.5.50.6.3 |
nvBillconf1EntryBillconf record. NvBillconf1Entry .1.3.6.1.4.1.230.5.50.6.3.1 |
nvBillconf1IndexIndex of Billconf recordro INTEGER .1.3.6.1.4.1.230.5.50.6.3.1.1 |
nvBillconfEnableEnable/Disable billstat accounting.rw Enumeration .1.3.6.1.4.1.230.5.50.6.3.1.2 |
nvBillconfSegsizeSegment size.rw INTEGER .1.3.6.1.4.1.230.5.50.6.3.1.3 |
nvBillconfSet1rw INTEGER .1.3.6.1.4.1.230.5.50.6.3.1.4 |
nvBillconfSet1nua1rw DisplayString .1.3.6.1.4.1.230.5.50.6.3.1.5 |
nvBillconfSet1nua2rw DisplayString .1.3.6.1.4.1.230.5.50.6.3.1.6 |
nvBillconfSet1nua3rw DisplayString .1.3.6.1.4.1.230.5.50.6.3.1.7 |
nvBillconfSet2rw INTEGER .1.3.6.1.4.1.230.5.50.6.3.1.8 |
nvBillconfSet2nua1rw DisplayString .1.3.6.1.4.1.230.5.50.6.3.1.9 |
nvBillconfSet2nua2rw DisplayString .1.3.6.1.4.1.230.5.50.6.3.1.10 |
nvBillconfSet2nua3rw DisplayString .1.3.6.1.4.1.230.5.50.6.3.1.11 |
nvBillconfSet3rw INTEGER .1.3.6.1.4.1.230.5.50.6.3.1.12 |
nvBillconfSet3nua1rw DisplayString .1.3.6.1.4.1.230.5.50.6.3.1.13 |
nvBillconfSet3nua2rw DisplayString .1.3.6.1.4.1.230.5.50.6.3.1.14 |
nvBillconfSet3nua3rw DisplayString .1.3.6.1.4.1.230.5.50.6.3.1.15 |
nvBillconfSet4rw INTEGER .1.3.6.1.4.1.230.5.50.6.3.1.16 |
nvBillconfSet4nua1rw DisplayString .1.3.6.1.4.1.230.5.50.6.3.1.17 |
nvBillconfSet4nua2rw DisplayString .1.3.6.1.4.1.230.5.50.6.3.1.18 |
nvBillconfSet4nua3rw DisplayString .1.3.6.1.4.1.230.5.50.6.3.1.19 |
nvBillconfSet5rw INTEGER .1.3.6.1.4.1.230.5.50.6.3.1.20 |
nvBillconfSet5nua1rw DisplayString .1.3.6.1.4.1.230.5.50.6.3.1.21 |
nvBillconfSet5nua2rw DisplayString .1.3.6.1.4.1.230.5.50.6.3.1.22 |
nvBillconfSet5nua3rw DisplayString .1.3.6.1.4.1.230.5.50.6.3.1.23 |
nvBillconfSet6rw INTEGER .1.3.6.1.4.1.230.5.50.6.3.1.24 |
nvBillconfSet6nua1rw DisplayString .1.3.6.1.4.1.230.5.50.6.3.1.25 |
nvBillconfSet6nua2rw DisplayString .1.3.6.1.4.1.230.5.50.6.3.1.26 |
nvBillconfSet6nua3rw DisplayString .1.3.6.1.4.1.230.5.50.6.3.1.27 |
nvBillconf2TableBillconf file. SEQUENCE OF NvBillconf2Entry .1.3.6.1.4.1.230.5.50.6.4 |
nvBillconf2EntryBillconf record. NvBillconf2Entry .1.3.6.1.4.1.230.5.50.6.4.1 |
nvBillconf2IndexIndex of Billconf recordro INTEGER .1.3.6.1.4.1.230.5.50.6.4.1.1 |
nvBillconfSet7rw INTEGER .1.3.6.1.4.1.230.5.50.6.4.1.2 |
nvBillconfSet7nua1rw DisplayString .1.3.6.1.4.1.230.5.50.6.4.1.3 |
nvBillconfSet7nua2rw DisplayString .1.3.6.1.4.1.230.5.50.6.4.1.4 |
nvBillconfSet7nua3rw DisplayString .1.3.6.1.4.1.230.5.50.6.4.1.5 |
nvBillconfSet8rw INTEGER .1.3.6.1.4.1.230.5.50.6.4.1.6 |
nvBillconfSet8nua1rw DisplayString .1.3.6.1.4.1.230.5.50.6.4.1.7 |
nvBillconfSet8nua2rw DisplayString .1.3.6.1.4.1.230.5.50.6.4.1.8 |
nvBillconfSet8nua3rw DisplayString .1.3.6.1.4.1.230.5.50.6.4.1.9 |
nvBillconfSet9rw INTEGER .1.3.6.1.4.1.230.5.50.6.4.1.10 |
nvBillconfSet9nua1rw DisplayString .1.3.6.1.4.1.230.5.50.6.4.1.11 |
nvBillconfSet9nua2rw DisplayString .1.3.6.1.4.1.230.5.50.6.4.1.12 |
nvBillconfSet9nua3rw DisplayString .1.3.6.1.4.1.230.5.50.6.4.1.13 |
nvBillconfSet10rw INTEGER .1.3.6.1.4.1.230.5.50.6.4.1.14 |
nvBillconfSet10nua1rw DisplayString .1.3.6.1.4.1.230.5.50.6.4.1.15 |
nvBillconfSet10nua2rw DisplayString .1.3.6.1.4.1.230.5.50.6.4.1.16 |
nvBillconfSet10nua3rw DisplayString .1.3.6.1.4.1.230.5.50.6.4.1.17 |
nvBillconfSet11rw INTEGER .1.3.6.1.4.1.230.5.50.6.4.1.18 |
nvBillconfSet11nua1rw DisplayString .1.3.6.1.4.1.230.5.50.6.4.1.19 |
nvBillconfSet11nua2rw DisplayString .1.3.6.1.4.1.230.5.50.6.4.1.20 |
nvBillconfSet11nua3rw DisplayString .1.3.6.1.4.1.230.5.50.6.4.1.21 |
nvBillconfSet12rw INTEGER .1.3.6.1.4.1.230.5.50.6.4.1.22 |
nvBillconfSet12nua1rw DisplayString .1.3.6.1.4.1.230.5.50.6.4.1.23 |
nvBillconfSet12nua2rw DisplayString .1.3.6.1.4.1.230.5.50.6.4.1.24 |
nvBillconfSet12nua3rw DisplayString .1.3.6.1.4.1.230.5.50.6.4.1.25 |
nvBillstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.50.7 |
nvBillstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.50.7.1 |
nvBillstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.50.7.2 |
nvBillstatTableBillstat file. SEQUENCE OF NvBillstatEntry .1.3.6.1.4.1.230.5.50.7.3 |
nvBillstatEntryBillstat record. NvBillstatEntry .1.3.6.1.4.1.230.5.50.7.3.1 |
nvBillstatIndexIndexro INTEGER .1.3.6.1.4.1.230.5.50.7.3.1.1 |
nvBillstatNodeidro INTEGER .1.3.6.1.4.1.230.5.50.7.3.1.2 |
nvBillstatDatero DisplayString .1.3.6.1.4.1.230.5.50.7.3.1.3 |
nvBillstatTimero DisplayString .1.3.6.1.4.1.230.5.50.7.3.1.4 |
nvBillstatNuasetro INTEGER .1.3.6.1.4.1.230.5.50.7.3.1.5 |
nvBillstatN300bpsro INTEGER .1.3.6.1.4.1.230.5.50.7.3.1.7 |
nvBillstatN1200bpsro INTEGER .1.3.6.1.4.1.230.5.50.7.3.1.8 |
nvBillstatN2400bpsro INTEGER .1.3.6.1.4.1.230.5.50.7.3.1.9 |
nvBillstatNgrtr2400ro INTEGER .1.3.6.1.4.1.230.5.50.7.3.1.10 |
nvBillstatTxsegro INTEGER .1.3.6.1.4.1.230.5.50.7.3.1.11 |
nvBillstatRxsegro INTEGER .1.3.6.1.4.1.230.5.50.7.3.1.12 |
nvBillstatRxcallcro INTEGER .1.3.6.1.4.1.230.5.50.7.3.1.13 |
nvBillstatHostclrro INTEGER .1.3.6.1.4.1.230.5.50.7.3.1.14 |
nvBillstatNetclrro INTEGER .1.3.6.1.4.1.230.5.50.7.3.1.15 |
nvBillstatTxpakro INTEGER .1.3.6.1.4.1.230.5.50.7.3.1.16 |
nvBillstatRxpakro INTEGER .1.3.6.1.4.1.230.5.50.7.3.1.17 |
nvBillstatLess5ro INTEGER .1.3.6.1.4.1.230.5.50.7.3.1.18 |
nvBillstat5to10ro INTEGER .1.3.6.1.4.1.230.5.50.7.3.1.19 |
nvBillstat10to15ro INTEGER .1.3.6.1.4.1.230.5.50.7.3.1.20 |
nvBillstat15to20ro INTEGER .1.3.6.1.4.1.230.5.50.7.3.1.21 |
nvBillstatGrtr20ro INTEGER .1.3.6.1.4.1.230.5.50.7.3.1.22 |
nvBillstatClosedRecord closed or open.ro Enumeration .1.3.6.1.4.1.230.5.50.7.3.1.23 |
nvApfilter OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.50.8 |
nvApfilterMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.50.8.1 |
nvApfilterNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.50.8.2 |
nvApfilterTableApfilter file. SEQUENCE OF NvApfilterEntry .1.3.6.1.4.1.230.5.50.8.3 |
nvApfilterEntryApfilter record. NvApfilterEntry .1.3.6.1.4.1.230.5.50.8.3.1 |
nvApfilterIndexIndex of Apfilter recordro INTEGER .1.3.6.1.4.1.230.5.50.8.3.1.1 |
nvApfilterCalledCalled Telephone Number.rw DisplayString .1.3.6.1.4.1.230.5.50.8.3.1.2 |
nvApfilterCallingCalling Telephone Number.rw DisplayString .1.3.6.1.4.1.230.5.50.8.3.1.3 |
nvApfilterAblockA Block.rw DisplayString .1.3.6.1.4.1.230.5.50.8.3.1.4 |
nvApfilterLabel1ANUACONF Label 1.rw DisplayString .1.3.6.1.4.1.230.5.50.8.3.1.5 |
nvApfilterMerchidMerchant ID.rw DisplayString .1.3.6.1.4.1.230.5.50.8.3.1.6 |
nvApfilterTermidTerminal ID.rw DisplayString .1.3.6.1.4.1.230.5.50.8.3.1.7 |
nvApfilterFailcauseFailure Cause.rw Enumeration .1.3.6.1.4.1.230.5.50.8.3.1.8 |
nvApfilterThresholdNumber of records per minute for this filter.rw INTEGER .1.3.6.1.4.1.230.5.50.8.3.1.9 |
nvApfilterStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.50.8.3.1.15 |
nvApfclstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.50.9 |
nvApfclstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.50.9.1 |
nvApfclstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.50.9.2 |
nvApfclstatTableApfclstat file. SEQUENCE OF NvApfclstatEntry .1.3.6.1.4.1.230.5.50.9.3 |
nvApfclstatEntryApfclstat record. NvApfclstatEntry .1.3.6.1.4.1.230.5.50.9.3.1 |
nvApfclstatIndexIndex of Apfclstat recordro INTEGER .1.3.6.1.4.1.230.5.50.9.3.1.1 |
nvApfclstatDateDate of Call Failure.ro DisplayString .1.3.6.1.4.1.230.5.50.9.3.1.2 |
nvApfclstatTimeTime of Call Failure.ro DisplayString .1.3.6.1.4.1.230.5.50.9.3.1.3 |
nvApfclstatCallingCalling telephone number.ro DisplayString .1.3.6.1.4.1.230.5.50.9.3.1.4 |
nvApfclstatCalledCalled telephone number.ro DisplayString .1.3.6.1.4.1.230.5.50.9.3.1.5 |
nvApfclstatAblockA-block received from terminal.ro DisplayString .1.3.6.1.4.1.230.5.50.9.3.1.6 |
nvApfclstatNuaNUA to which call was connected.ro DisplayString .1.3.6.1.4.1.230.5.50.9.3.1.7 |
nvApfclstatLabel1ANUACONF label1 used.ro DisplayString .1.3.6.1.4.1.230.5.50.9.3.1.8 |
nvApfclstatMerchidMerchant ID from transaction.ro DisplayString .1.3.6.1.4.1.230.5.50.9.3.1.9 |
nvApfclstatTermidTerminal ID from transaction.ro DisplayString .1.3.6.1.4.1.230.5.50.9.3.1.10 |
nvApfclstatSpeedSpeed of modem.ro INTEGER .1.3.6.1.4.1.230.5.50.9.3.1.11 |
nvApfclstatTxbytesNumber of bytes sent.ro INTEGER .1.3.6.1.4.1.230.5.50.9.3.1.12 |
nvApfclstatRxbytesNumber of bytes received.ro INTEGER .1.3.6.1.4.1.230.5.50.9.3.1.13 |
nvApfclstatIsdnclrISDN Clear codes.ro INTEGER .1.3.6.1.4.1.230.5.50.9.3.1.14 |
nvApfclstatX25clrX25 Clear codes.ro INTEGER .1.3.6.1.4.1.230.5.50.9.3.1.15 |
nvApfclstatDialindDial indicator from the transaction data.ro INTEGER .1.3.6.1.4.1.230.5.50.9.3.1.16 |
nvApfclstatTermtypeTerminal type from the transaction data.ro DisplayString .1.3.6.1.4.1.230.5.50.9.3.1.17 |
nvApfclstatPstndurPSTN duration.ro INTEGER .1.3.6.1.4.1.230.5.50.9.3.1.18 |
nvApfclstatX25durX25 duration.ro INTEGER .1.3.6.1.4.1.230.5.50.9.3.1.19 |
nvApfclstatDspnameDSP Port Number.ro DisplayString .1.3.6.1.4.1.230.5.50.9.3.1.20 |
nvApfclstatPrinamePRI link number.ro Enumeration .1.3.6.1.4.1.230.5.50.9.3.1.21 |
nvApfclstatWanportX25 Port Number.ro DisplayString .1.3.6.1.4.1.230.5.50.9.3.1.22 |
nvApfclstatFailcauseFailure Cause.ro Enumeration .1.3.6.1.4.1.230.5.50.9.3.1.23 |
nvApfclstatFilterFilter number - not used in this file.ro INTEGER .1.3.6.1.4.1.230.5.50.9.3.1.24 |
nvApclstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.50.10 |
nvApclstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.50.10.1 |
nvApclstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.50.10.2 |
nvApclstatTableApclstat file. SEQUENCE OF NvApclstatEntry .1.3.6.1.4.1.230.5.50.10.3 |
nvApclstatEntryApclstat record. NvApclstatEntry .1.3.6.1.4.1.230.5.50.10.3.1 |
nvApclstatIndexIndex of Apclstat recordro INTEGER .1.3.6.1.4.1.230.5.50.10.3.1.1 |
nvApclstatDateDate of Call Failure.ro DisplayString .1.3.6.1.4.1.230.5.50.10.3.1.2 |
nvApclstatTimeTime of Call Failure.ro DisplayString .1.3.6.1.4.1.230.5.50.10.3.1.3 |
nvApclstatCallingCalling telephone number.ro DisplayString .1.3.6.1.4.1.230.5.50.10.3.1.4 |
nvApclstatCalledCalled telephone number.ro DisplayString .1.3.6.1.4.1.230.5.50.10.3.1.5 |
nvApclstatAblockA-block received from terminal.ro DisplayString .1.3.6.1.4.1.230.5.50.10.3.1.6 |
nvApclstatNuaNUA to which call was connected.ro DisplayString .1.3.6.1.4.1.230.5.50.10.3.1.7 |
nvApclstatLabel1ANUACONF label1 used.ro DisplayString .1.3.6.1.4.1.230.5.50.10.3.1.8 |
nvApclstatMerchidMerchant ID from transaction.ro DisplayString .1.3.6.1.4.1.230.5.50.10.3.1.9 |
nvApclstatTermidTerminal ID from transaction.ro DisplayString .1.3.6.1.4.1.230.5.50.10.3.1.10 |
nvApclstatSpeedSpeed of modem.ro INTEGER .1.3.6.1.4.1.230.5.50.10.3.1.11 |
nvApclstatTxbytesNumber of bytes sent.ro INTEGER .1.3.6.1.4.1.230.5.50.10.3.1.12 |
nvApclstatRxbytesNumber of bytes received.ro INTEGER .1.3.6.1.4.1.230.5.50.10.3.1.13 |
nvApclstatIsdnclrISDN Clear codes.ro INTEGER .1.3.6.1.4.1.230.5.50.10.3.1.14 |
nvApclstatX25clrX25 Clear codes.ro INTEGER .1.3.6.1.4.1.230.5.50.10.3.1.15 |
nvApclstatDialindDial indicator from the transaction data.ro INTEGER .1.3.6.1.4.1.230.5.50.10.3.1.16 |
nvApclstatTermtypeTerminal type from the transaction data.ro DisplayString .1.3.6.1.4.1.230.5.50.10.3.1.17 |
nvApclstatPstndurPSTN duration.ro INTEGER .1.3.6.1.4.1.230.5.50.10.3.1.18 |
nvApclstatX25durX25 duration.ro INTEGER .1.3.6.1.4.1.230.5.50.10.3.1.19 |
nvApclstatDspnameDSP Port Number.ro DisplayString .1.3.6.1.4.1.230.5.50.10.3.1.20 |
nvApclstatPrinamePRI link number.ro Enumeration .1.3.6.1.4.1.230.5.50.10.3.1.21 |
nvApclstatWanportX25 Port Number.ro DisplayString .1.3.6.1.4.1.230.5.50.10.3.1.22 |
nvApclstatFailcauseFailure Cause.ro Enumeration .1.3.6.1.4.1.230.5.50.10.3.1.23 |
nvApclstatFilterFilter number used to produce this record.ro INTEGER .1.3.6.1.4.1.230.5.50.10.3.1.24 |
nevadaR2 OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.55 |
nvR2prof OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.55.1 |
nvR2profMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.55.1.1 |
nvR2profNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.55.1.2 |
nvR2profTableR2prof file. SEQUENCE OF NvR2profEntry .1.3.6.1.4.1.230.5.55.1.3 |
nvR2profEntryR2prof record. NvR2profEntry .1.3.6.1.4.1.230.5.55.1.3.1 |
nvR2profIndexIndex of R2prof recordro INTEGER .1.3.6.1.4.1.230.5.55.1.3.1.1 |
nvR2profProfnameName of R2 flavor (profname)rw DisplayString .1.3.6.1.4.1.230.5.55.1.3.1.2 |
nvR2profSuffixAbbreviation of R2 flavor (suffix)rw DisplayString .1.3.6.1.4.1.230.5.55.1.3.1.3 |
nvR2profcdBitsSupport for CD bits (cdbits)
Default value 2rw INTEGER .1.3.6.1.4.1.230.5.55.1.3.1.4 |
nvR2profClearbackSupport for CLEAR_BACK (clearback)rw Enumeration .1.3.6.1.4.1.230.5.55.1.3.1.5 |
nvR2profForcerelSupport for Forced Release (forcerel)rw Enumeration .1.3.6.1.4.1.230.5.55.1.3.1.6 |
nvR2profClearackSupport for CLEAR_ACK (clearack)rw Enumeration .1.3.6.1.4.1.230.5.55.1.3.1.7 |
nvR2profReanswerSupport for Reanswer (reanswer)rw Enumeration .1.3.6.1.4.1.230.5.55.1.3.1.8 |
nvR2profMfmodeMF scheme for in-band signaling (mfmode)rw Enumeration .1.3.6.1.4.1.230.5.55.1.3.1.9 |
nvR2profMfnextdigMF code for send next digit (mfnextdig)rw Enumeration .1.3.6.1.4.1.230.5.55.1.3.1.10 |
nvR2profMfrestartMF code for restart (mfrestart)rw Enumeration .1.3.6.1.4.1.230.5.55.1.3.1.11 |
nvR2profMfcongstionMF code for eqpt congestion (mfcongestion)rw Enumeration .1.3.6.1.4.1.230.5.55.1.3.1.12 |
nvR2profMfvacantMF code for vacant number (mfvacant)rw Enumeration .1.3.6.1.4.1.230.5.55.1.3.1.13 |
nvR2profMfspeechMF code for set up speech charge (mfspeech)rw Enumeration .1.3.6.1.4.1.230.5.55.1.3.1.14 |
nvR2profMfbusyMF code for line busy (mfbusy)rw Enumeration .1.3.6.1.4.1.230.5.55.1.3.1.15 |
nvR2profMfspchncMF code for free no charge (mfspchnc)rw Enumeration .1.3.6.1.4.1.230.5.55.1.3.1.16 |
nvR2profMfgroupbMF code for change to group B (mfgroupb)rw Enumeration .1.3.6.1.4.1.230.5.55.1.3.1.17 |
nvR2profMfanumschTrans prot type for calling number (mfanumsch)rw INTEGER .1.3.6.1.4.1.230.5.55.1.3.1.18 |
nvR2profMftimeoutTimeout for MF signaling (mftimeout)rw INTEGER .1.3.6.1.4.1.230.5.55.1.3.1.19 |
nvR2profStatusOperation status. Add the record to the table (valid) or delete
the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.55.1.3.1.20 |
nvR2profAnswergrdMinimal duration of answer signal in ms.rw INTEGER .1.3.6.1.4.1.230.5.55.1.3.1.21 |
nvR2profClrfwdgrdMinimal duration of clr fwd signal in ms.rw INTEGER .1.3.6.1.4.1.230.5.55.1.3.1.22 |
nvR2profMfabnrelMF code for abnormal release of inband.rw Enumeration .1.3.6.1.4.1.230.5.55.1.3.1.23 |
nvR2profIdlealmskMask alarms in IDLE state?rw Enumeration .1.3.6.1.4.1.230.5.55.1.3.1.24 |
nvR2profSeizalmskMask alarms in SEIZED state?rw Enumeration .1.3.6.1.4.1.230.5.55.1.3.1.25 |
nvR2profSzakalmskMask alarms in SEIZE ACK state?rw Enumeration .1.3.6.1.4.1.230.5.55.1.3.1.26 |
nvR2profAnswalmskMask alarms in ANSWERED state?rw Enumeration .1.3.6.1.4.1.230.5.55.1.3.1.27 |
nvR2profClbkalmskMask alarms in ANSWERED state?rw Enumeration .1.3.6.1.4.1.230.5.55.1.3.1.28 |
nvR2profFcrlalmskMask alarms in FORCE RELEASE state?rw Enumeration .1.3.6.1.4.1.230.5.55.1.3.1.29 |
nvR2profClfwalmskMask alarms in CLEAR FWD state?rw Enumeration .1.3.6.1.4.1.230.5.55.1.3.1.30 |
nvR2profBlckalmskMask alarms in BLOCKED state?rw Enumeration .1.3.6.1.4.1.230.5.55.1.3.1.31 |
nvR2syspar OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.55.2 |
nvR2sysparMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.55.2.1 |
nvR2sysparNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.55.2.2 |
nvR2sysparTableR2syspar file. SEQUENCE OF NvR2sysparEntry .1.3.6.1.4.1.230.5.55.2.3 |
nvR2sysparEntryR2syspar record. NvR2sysparEntry .1.3.6.1.4.1.230.5.55.2.3.1 |
nvR2sysparIndexIndex of R2syspar recordro INTEGER .1.3.6.1.4.1.230.5.55.2.3.1.1 |
nvR2sysparProfnameName of R2 flavor (profname)rw DisplayString .1.3.6.1.4.1.230.5.55.2.3.1.2 |
nvR2sysparMaxperdspSignaling channels allowed per R2DSP (maxperdsp)rw INTEGER .1.3.6.1.4.1.230.5.55.2.3.1.3 |
nvR2sysparAllocthrsAllocation threshold for R2DSPs (allocthrs)rw INTEGER .1.3.6.1.4.1.230.5.55.2.3.1.4 |
nvR2sysparDeallthrsDeallocation threshold for R2DSPs (deallthrs)rw INTEGER .1.3.6.1.4.1.230.5.55.2.3.1.5 |
nvR2sysparStatintHealth status message interval for R2DSPs (statint)rw INTEGER .1.3.6.1.4.1.230.5.55.2.3.1.6 |
nvR2sysparAlarmintDebounce for line status changes (alarmint)rw INTEGER .1.3.6.1.4.1.230.5.55.2.3.1.7 |
nvR2sysparLinewayDirection of allowed R2 calls (lineway)rw Enumeration .1.3.6.1.4.1.230.5.55.2.3.1.8 |
nvR2sysparMaxbnmlenMaximum length of called number for incoming calls (maxbnmlen)
default is zerorw INTEGER .1.3.6.1.4.1.230.5.55.2.3.1.9 |
nvR2sysparMinbnmlenMinimum length of called number for incoming calls (minbnmlen)
Default value is zerorw INTEGER .1.3.6.1.4.1.230.5.55.2.3.1.10 |
nvR2sysparGetcallingWhether or not calling number is needed (getcallng)
default is yesrw Enumeration .1.3.6.1.4.1.230.5.55.2.3.1.11 |
nvR2conf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.55.3 |
nvR2confMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.55.3.1 |
nvR2confNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.55.3.2 |
nvR2confTableR2conf file. SEQUENCE OF NvR2confEntry .1.3.6.1.4.1.230.5.55.3.3 |
nvR2confEntryR2conf record. NvR2confEntry .1.3.6.1.4.1.230.5.55.3.3.1 |
nvR2confIndexIndex of R2conf recordro INTEGER .1.3.6.1.4.1.230.5.55.3.3.1.1 |
nvR2confDlinameName of DLI port (dliname)rw DisplayString .1.3.6.1.4.1.230.5.55.3.3.1.3 |
nvR2confStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.55.3.3.1.4 |
nvR2pstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.55.4 |
nvR2pstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.55.4.1 |
nvR2pstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.55.4.2 |
nvR2pstatTableR2pstat file. SEQUENCE OF NvR2pstatEntry .1.3.6.1.4.1.230.5.55.4.3 |
nvR2pstatEntryR2pstat record. NvR2pstatEntry .1.3.6.1.4.1.230.5.55.4.3.1 |
nvR2pstatIndexIndex of R2pstat recordro INTEGER .1.3.6.1.4.1.230.5.55.4.3.1.1 |
nvR2pstatDlinameName of DLI port (dliname)ro DisplayString .1.3.6.1.4.1.230.5.55.4.3.1.2 |
nvR2pstatPstatStatus of R2 portro Enumeration .1.3.6.1.4.1.230.5.55.4.3.1.3 |
nvR2pstatTsstatStatus of R2 port's timeslots.
s : means timeslot for synchronization
O : means out-of-band signaling
- : means no info yet
B : means blocked
I : means idle
M : means in-band signaling (MF)
C : means call is up
E : means timeslot is in abnormal state
D : means port is down.ro DisplayString .1.3.6.1.4.1.230.5.55.4.3.1.4 |
nvR2pstatObr2dspR2DSP which has this ports ob sig channelro INTEGER .1.3.6.1.4.1.230.5.55.4.3.1.5 |
nvR2pstatObstatstatus of the ob sig channel for this portro Enumeration .1.3.6.1.4.1.230.5.55.4.3.1.6 |
nvR2pstatLstatinfoInformation accompanying a LINE_STATUS messagero INTEGER .1.3.6.1.4.1.230.5.55.4.3.1.7 |
nvR2pstatLinbadcntNo. of line_status line_bad msg receivedro Counter .1.3.6.1.4.1.230.5.55.4.3.1.8 |
nvR2pstatTsbadcntNo. of line_status line_bad msg receivedro Counter .1.3.6.1.4.1.230.5.55.4.3.1.9 |
nvR2pstatTotisigattNo. of incoming in-band channels createdro Counter .1.3.6.1.4.1.230.5.55.4.3.1.10 |
nvR2pstatToticalattNo. of incoming R2 calls attemptedro Counter .1.3.6.1.4.1.230.5.55.4.3.1.11 |
nvR2pstatToticalestNo. of incoming R2 calls establishedro Counter .1.3.6.1.4.1.230.5.55.4.3.1.12 |
nvR2pstatTotosigattNo. of outgoing in-band channels createdro Counter .1.3.6.1.4.1.230.5.55.4.3.1.13 |
nvR2pstatTotocalattNo. of outgoing R2 calls attemptedro Counter .1.3.6.1.4.1.230.5.55.4.3.1.14 |
nvR2pstatTotocalestNo. of outgoing R2 calls establishedro Counter .1.3.6.1.4.1.230.5.55.4.3.1.15 |
nvR2pstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.55.4.3.1.16 |
nvR2pstatFlavorAbbreviation of R2 flavor.ro DisplayString .1.3.6.1.4.1.230.5.55.4.3.1.17 |
nvR2dspstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.55.5 |
nvR2dspstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.55.5.1 |
nvR2dspstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.55.5.2 |
nvR2dspstatTableR2dspstat file. SEQUENCE OF NvR2dspstatEntry .1.3.6.1.4.1.230.5.55.5.3 |
nvR2dspstatEntryR2dspstat record. NvR2dspstatEntry .1.3.6.1.4.1.230.5.55.5.3.1 |
nvR2dspstatIndexIndex of R2dspstat recordro INTEGER .1.3.6.1.4.1.230.5.55.5.3.1.1 |
nvR2dspstatDevnameName of DSP device used for this R2DSPro DisplayString .1.3.6.1.4.1.230.5.55.5.3.1.2 |
nvR2dspstatStatHealth status of R2DSPro Enumeration .1.3.6.1.4.1.230.5.55.5.3.1.3 |
nvR2dspstatNumobchnNum of ob sig channels assigned to this R2DSPro Counter .1.3.6.1.4.1.230.5.55.5.3.1.4 |
nvR2dspstatNumibchnNum of ib channels assigned to this R2DSPro Counter .1.3.6.1.4.1.230.5.55.5.3.1.5 |
nvR2dspstatUnusedchnNum of avaialble timeslots on this R2DSPro Counter .1.3.6.1.4.1.230.5.55.5.3.1.6 |
nvR2dspstatTotobchnCumulative total of ob channels assigned to this R2DSPro Counter .1.3.6.1.4.1.230.5.55.5.3.1.7 |
nvR2dspstatTotibchnCumulative total of ib channels assigned to this R2DSPro Counter .1.3.6.1.4.1.230.5.55.5.3.1.8 |
nvR2dspstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.55.5.3.1.9 |
nvR2dspstatFlavorAbbreviation of the R2 Flavor.ro DisplayString .1.3.6.1.4.1.230.5.55.5.3.1.10 |
nvR2cstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.55.6 |
nvR2cstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.55.6.1 |
nvR2cstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.55.6.2 |
nvR2cstatTableR2cstat file. SEQUENCE OF NvR2cstatEntry .1.3.6.1.4.1.230.5.55.6.3 |
nvR2cstatEntryR2cstat record. NvR2cstatEntry .1.3.6.1.4.1.230.5.55.6.3.1 |
nvR2cstatIndexIndex of R2cstat recordro INTEGER .1.3.6.1.4.1.230.5.55.6.3.1.1 |
nvR2cstatR2portR2CONF record number of port carring timeslot of this callro INTEGER .1.3.6.1.4.1.230.5.55.6.3.1.2 |
nvR2cstatTimeslotTimeslot numberro INTEGER .1.3.6.1.4.1.230.5.55.6.3.1.3 |
nvR2cstatIbr2dspR2DSPSTAT recnum of R2DSP carrying this circuitro INTEGER .1.3.6.1.4.1.230.5.55.6.3.1.4 |
nvR2cstatCstatCurrent status of this timeslotro Enumeration .1.3.6.1.4.1.230.5.55.6.3.1.5 |
nvR2cstatDirectionincoming or outgoing callro Enumeration .1.3.6.1.4.1.230.5.55.6.3.1.6 |
nvR2cstatReasonFor failed calls reason for the failurero INTEGER .1.3.6.1.4.1.230.5.55.6.3.1.7 |
nvR2cstatCallnumSequence number of this callro INTEGER .1.3.6.1.4.1.230.5.55.6.3.1.8 |
nvR2cstatCallednumCalled numberro DisplayString .1.3.6.1.4.1.230.5.55.6.3.1.9 |
nvR2cstatCallingnumCalling numberro DisplayString .1.3.6.1.4.1.230.5.55.6.3.1.10 |
nvR2cstatLanguageLanguage of callro Enumeration .1.3.6.1.4.1.230.5.55.6.3.1.11 |
nvR2cstatEchosupEcho suppressorro Enumeration .1.3.6.1.4.1.230.5.55.6.3.1.12 |
nvR2cstatCpartyType of calling partyro Enumeration .1.3.6.1.4.1.230.5.55.6.3.1.13 |
nevadaRb OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.58 |
nvRbsyspar OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.58.1 |
nvRbsysparMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.58.1.1 |
nvRbsysparNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.58.1.2 |
nvRbsysparTableRbsyspar file. SEQUENCE OF NvRbsysparEntry .1.3.6.1.4.1.230.5.58.1.3 |
nvRbsysparEntryRbsyspar record. NvRbsysparEntry .1.3.6.1.4.1.230.5.58.1.3.1 |
nvRbsysparIndexIndex of Rbsyspar recordro INTEGER .1.3.6.1.4.1.230.5.58.1.3.1.1 |
nvRbsysparMaxperdspSignaling channels allowed per RbDSP (maxperdsp)rw INTEGER .1.3.6.1.4.1.230.5.58.1.3.1.3 |
nvRbsysparAllocthrsAllocation threshold for RbDSPs (allocthrs)rw INTEGER .1.3.6.1.4.1.230.5.58.1.3.1.4 |
nvRbsysparDeallthrsDeallocation threshold for RbDSPs (deallthrs)rw INTEGER .1.3.6.1.4.1.230.5.58.1.3.1.5 |
nvRbsysparStatintHealth status message interval for RbDSPs (statint)rw INTEGER .1.3.6.1.4.1.230.5.58.1.3.1.6 |
nvRbsysparAlarmintDebounce for line status changes (alarmint)rw INTEGER .1.3.6.1.4.1.230.5.58.1.3.1.7 |
nvRbsysparMaxbnmlenMaximum length of called number for incoming calls (maxbnmlen)
default is zerorw INTEGER .1.3.6.1.4.1.230.5.58.1.3.1.9 |
nvRbsysparMinbnmlenMinimum length of called number for incoming calls (minbnmlen)
Default value is zerorw INTEGER .1.3.6.1.4.1.230.5.58.1.3.1.10 |
nvRbsysparPollintPolling interval for RB pipes.
default is 25rw INTEGER .1.3.6.1.4.1.230.5.58.1.3.1.11 |
nvRbsysparStatusOperation status. Add the record to the table (valid) or delete
the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.58.1.3.1.12 |
nvRbconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.58.2 |
nvRbconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.58.2.1 |
nvRbconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.58.2.2 |
nvRbconfTableRbconf file. SEQUENCE OF NvRbconfEntry .1.3.6.1.4.1.230.5.58.2.3 |
nvRbconfEntryRbconf record. NvRbconfEntry .1.3.6.1.4.1.230.5.58.2.3.1 |
nvRbconfIndexIndex of Rbconf recordro INTEGER .1.3.6.1.4.1.230.5.58.2.3.1.1 |
nvRbconfDlinameName of DLI port (dliname)rw DisplayString .1.3.6.1.4.1.230.5.58.2.3.1.3 |
nvRbconfProfnameName of Profrw DisplayString .1.3.6.1.4.1.230.5.58.2.3.1.4 |
nvRbconfRtmethoddefault 15rw Enumeration .1.3.6.1.4.1.230.5.58.2.3.1.5 |
nvRbconfStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.58.2.3.1.6 |
nvRbpstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.58.3 |
nvRbpstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.58.3.1 |
nvRbpstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.58.3.2 |
nvRbpstatTableRbpstat file. SEQUENCE OF NvRbpstatEntry .1.3.6.1.4.1.230.5.58.3.3 |
nvRbpstatEntryRbpstat record. NvRbpstatEntry .1.3.6.1.4.1.230.5.58.3.3.1 |
nvRbpstatIndexIndex of Rbpstat recordro INTEGER .1.3.6.1.4.1.230.5.58.3.3.1.1 |
nvRbpstatDlinameName of (dliname)ro DisplayString .1.3.6.1.4.1.230.5.58.3.3.1.2 |
nvRbpstatFlavorNamero DisplayString .1.3.6.1.4.1.230.5.58.3.3.1.3 |
nvRbpstatPstatStatus of Rb portro Enumeration .1.3.6.1.4.1.230.5.58.3.3.1.4 |
nvRbpstatTsstatStatus of Rb port's timeslots.
s : means timeslot for synchronization
O : means out-of-band signaling
- : means no info yet
B : means blocked
I : means idle
M : means in-band signaling (MF)
C : means call is up
E : means timeslot is in abnormal state
D : means port is down.ro DisplayString .1.3.6.1.4.1.230.5.58.3.3.1.5 |
nvRbpstatRbsrbdspRbsrbDSP which has this ports ob sig channelro INTEGER .1.3.6.1.4.1.230.5.58.3.3.1.6 |
nvRbpstatRbstatstatus of the ob sig channel for this portro Enumeration .1.3.6.1.4.1.230.5.58.3.3.1.7 |
nvRbpstatLstatinfoInformation accompanying a LINE_STATUS messagero INTEGER .1.3.6.1.4.1.230.5.58.3.3.1.8 |
nvRbpstatLinbadcntNo. of line_status line_bad msg receivedro Counter .1.3.6.1.4.1.230.5.58.3.3.1.9 |
nvRbpstatTsbadcntNo. of line_status line_bad msg receivedro Counter .1.3.6.1.4.1.230.5.58.3.3.1.10 |
nvRbpstatTotisigattNo. of incoming in-band channels createdro Counter .1.3.6.1.4.1.230.5.58.3.3.1.11 |
nvRbpstatToticalattNo. of incoming Rb calls attemptedro Counter .1.3.6.1.4.1.230.5.58.3.3.1.12 |
nvRbpstatToticalestNo. of incoming Rb calls establishedro Counter .1.3.6.1.4.1.230.5.58.3.3.1.13 |
nvRbpstatTotosigattNo. of outgoing in-band channels createdro Counter .1.3.6.1.4.1.230.5.58.3.3.1.14 |
nvRbpstatTotocalattNo. of outgoing R2 calls attemptedro Counter .1.3.6.1.4.1.230.5.58.3.3.1.15 |
nvRbpstatTotocalestNo. of outgoing Rb calls establishedro Counter .1.3.6.1.4.1.230.5.58.3.3.1.16 |
nvRbpstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.58.3.3.1.17 |
nvRbdspstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.58.4 |
nvRbdspstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.58.4.1 |
nvRbdspstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.58.4.2 |
nvRbdspstatTableRbdspstat file. SEQUENCE OF NvRbdspstatEntry .1.3.6.1.4.1.230.5.58.4.3 |
nvRbdspstatEntryRbdspstat record. NvRbdspstatEntry .1.3.6.1.4.1.230.5.58.4.3.1 |
nvRbdspstatIndexIndex of Rbdspstat recordro INTEGER .1.3.6.1.4.1.230.5.58.4.3.1.1 |
nvRbdspstatDevnameName of DSP device used for this RbDSPro DisplayString .1.3.6.1.4.1.230.5.58.4.3.1.2 |
nvRbdspstatFlavorflavorro DisplayString .1.3.6.1.4.1.230.5.58.4.3.1.3 |
nvRbdspstatStatHealth status of RbDSPro Enumeration .1.3.6.1.4.1.230.5.58.4.3.1.4 |
nvRbdspstatNumrbpipeNum of rbpipe sig channels assigned to this RbDSPro Counter .1.3.6.1.4.1.230.5.58.4.3.1.5 |
nvRbdspstatNumibchnNum of ib channels assigned to this RbDSPro Counter .1.3.6.1.4.1.230.5.58.4.3.1.6 |
nvRbdspstatUnusedchnNum of avaialble timeslots on this RbDSPro Counter .1.3.6.1.4.1.230.5.58.4.3.1.7 |
nvRbdspstatTotrbpipeCumulative total of rbpipe channels assigned to this RbDSPro Counter .1.3.6.1.4.1.230.5.58.4.3.1.8 |
nvRbdspstatTotibchnCumulative total of ib channels assigned to this RbDSPro Counter .1.3.6.1.4.1.230.5.58.4.3.1.9 |
nvRbdspstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.58.4.3.1.10 |
nvRbcstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.58.5 |
nvRbcstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.58.5.1 |
nvRbcstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.58.5.2 |
nvRbcstatTableRbcstat file. SEQUENCE OF NvRbcstatEntry .1.3.6.1.4.1.230.5.58.5.3 |
nvRbcstatEntryRbcstat record. NvRbcstatEntry .1.3.6.1.4.1.230.5.58.5.3.1 |
nvRbcstatIndexIndex of Rbcstat recordro INTEGER .1.3.6.1.4.1.230.5.58.5.3.1.1 |
nvRbcstatRbportRBCONF record number of port carring timeslot of this callro INTEGER .1.3.6.1.4.1.230.5.58.5.3.1.2 |
nvRbcstatTimeslotTimeslot numberro INTEGER .1.3.6.1.4.1.230.5.58.5.3.1.3 |
nvRbcstatIbrbdspRBDSPSTAT recnum of RBDSP carrying this circuitro INTEGER .1.3.6.1.4.1.230.5.58.5.3.1.4 |
nvRbcstatCstatCurrent status of this timeslotro Enumeration .1.3.6.1.4.1.230.5.58.5.3.1.5 |
nvRbcstatDirectionincoming or outgoing callro Enumeration .1.3.6.1.4.1.230.5.58.5.3.1.6 |
nvRbcstatReasonFor failed calls reason for the failurero INTEGER .1.3.6.1.4.1.230.5.58.5.3.1.7 |
nvRbcstatCallnumSequence number of this callro INTEGER .1.3.6.1.4.1.230.5.58.5.3.1.8 |
nvRbcstatCallednumCalled numberro DisplayString .1.3.6.1.4.1.230.5.58.5.3.1.9 |
nvRbcstatCallingnumCalling numberro DisplayString .1.3.6.1.4.1.230.5.58.5.3.1.10 |
nvRbprof OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.58.6 |
nvRbprofMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.58.6.1 |
nvRbprofNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.58.6.2 |
nvRbprofTableRbprof file. SEQUENCE OF NvRbprofEntry .1.3.6.1.4.1.230.5.58.6.3 |
nvRbprofEntryRbprof record. NvRbprofEntry .1.3.6.1.4.1.230.5.58.6.3.1 |
nvRbprofIndexIndex of Rbprof recordro INTEGER .1.3.6.1.4.1.230.5.58.6.3.1.1 |
nvRbprofProfnameName of RB flavor (profname)rw DisplayString .1.3.6.1.4.1.230.5.58.6.3.1.2 |
nvRbprofSuffixAbbreviation of RB flavor (suffix)rw DisplayString .1.3.6.1.4.1.230.5.58.6.3.1.3 |
nvRbprofSigtypeSupport for CD bits (cdbits)
Default value 2rw Enumeration .1.3.6.1.4.1.230.5.58.6.3.1.4 |
nvRbprofRlcfrw Enumeration .1.3.6.1.4.1.230.5.58.6.3.1.5 |
nvRbprofLcforw Enumeration .1.3.6.1.4.1.230.5.58.6.3.1.6 |
nvRbprofWinklenSupport for CLEAR_ACK (clearack)rw INTEGER .1.3.6.1.4.1.230.5.58.6.3.1.7 |
nvRbprofMfdelayDuration in ms between wink and inband (mfdelay).rw INTEGER .1.3.6.1.4.1.230.5.58.6.3.1.8 |
nvRbprofDisconlenDuration of EM disconnection.rw INTEGER .1.3.6.1.4.1.230.5.58.6.3.1.9 |
nvRbprofIbsigtypeInband signaling protocol to use.rw Enumeration .1.3.6.1.4.1.230.5.58.6.3.1.10 |
nvRbprofDtmftmoutDTMF signal timeout.rw INTEGER .1.3.6.1.4.1.230.5.58.6.3.1.11 |
nvRbprofDtmfonDTMF signal ON time.rw INTEGER .1.3.6.1.4.1.230.5.58.6.3.1.12 |
nvRbprofDtmfoffDTMF signal OFF time.rw INTEGER .1.3.6.1.4.1.230.5.58.6.3.1.13 |
nvRbprofStatusOperation status. Add the record to the table (valid) or delete
the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.58.6.3.1.14 |
nevadaTraps OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.64 |
nvTrapS0S0: 0-80 character trap stringro DisplayString .1.3.6.1.4.1.230.5.64.1 |
nvTrapS1S1: 0-80 character trap stringro DisplayString .1.3.6.1.4.1.230.5.64.2 |
nvTrapS2S2: 0-80 character trap stringro DisplayString .1.3.6.1.4.1.230.5.64.3 |
nvTrapN0N0: numeric trap valuero INTEGER .1.3.6.1.4.1.230.5.64.4 |
nvTrapN1N1: numeric trap valuero INTEGER .1.3.6.1.4.1.230.5.64.5 |
nvTrapN2N2: numeric trap valuero INTEGER .1.3.6.1.4.1.230.5.64.6 |
nvTrapconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.64.7 |
nvTrapconfMaxRectotal number of traps that have been definedro INTEGER .1.3.6.1.4.1.230.5.64.7.1 |
nvTrapconfNumRecnumber of highest record in use.ro INTEGER .1.3.6.1.4.1.230.5.64.7.2 |
nvTrapconfTableNevada Traps Lists SEQUENCE OF NvTrapconfEntry .1.3.6.1.4.1.230.5.64.7.3 |
nvTrapconfEntryNevada Trapconf definition. NvTrapconfEntry .1.3.6.1.4.1.230.5.64.7.3.1 |
nvTrapconfIndexIndex for traps.. for config purposero INTEGER .1.3.6.1.4.1.230.5.64.7.3.1.1 |
nvTrapconfTrapIdThe assigned enterprise trap numberro INTEGER .1.3.6.1.4.1.230.5.64.7.3.1.2 |
nvTrapconfDescThe Description of the specific traprw DisplayString .1.3.6.1.4.1.230.5.64.7.3.1.3 |
nvTrapconfStatusOperation status of the Trap. Use enable to generate
trap and disable otherwise.rw Enumeration .1.3.6.1.4.1.230.5.64.7.3.1.4 |
nevadaAdmin OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.65 |
nvRebootReboot Nevada.rw Enumeration .1.3.6.1.4.1.230.5.65.1 |
nvWriteConfigWrite Configuration -save-rw Enumeration .1.3.6.1.4.1.230.5.65.2 |
nvDateSet Nevada date/time. The Format is as follows
yyyy mm dd hh mm ssrw DisplayString .1.3.6.1.4.1.230.5.65.3 |
nvWriteRootWrite Mediastat file (root)rw Enumeration .1.3.6.1.4.1.230.5.65.4 |
nvStartScriptScript Number to Startrw INTEGER .1.3.6.1.4.1.230.5.65.5 |
nvString OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.65.6 |
nvStringMaxRectotal number of records available for all strings allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.65.6.1 |
nvStringNumRecnumber of highest record in use.ro INTEGER .1.3.6.1.4.1.230.5.65.6.2 |
nvStringTableNevada String List file. SEQUENCE OF NvStringEntry .1.3.6.1.4.1.230.5.65.6.3 |
nvStringEntryNevada String record. NvStringEntry .1.3.6.1.4.1.230.5.65.6.3.1 |
nvStringIndexIndex of Nevada String recordro INTEGER .1.3.6.1.4.1.230.5.65.6.3.1.1 |
nvStringDataThe data in the specific string, size up to 256rw DisplayString .1.3.6.1.4.1.230.5.65.6.3.1.2 |
nvStringStatusOperation status of the record. Use valid to add
record to database file and invalid to delete
record from database file.rw Enumeration .1.3.6.1.4.1.230.5.65.6.3.1.3 |
nevadaPos OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.66 |
nvPosprof OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.66.1 |
nvPosprofMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.66.1.1 |
nvPosprofNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.66.1.2 |
nvPosprofTableNEvada node posprof file. SEQUENCE OF NvPosprofEntry .1.3.6.1.4.1.230.5.66.1.3 |
nvPosprofEntryNevada node posprof record. NvPosprofEntry .1.3.6.1.4.1.230.5.66.1.3.1 |
nvPosprofIndexIndex of nevada posprof recordro INTEGER .1.3.6.1.4.1.230.5.66.1.3.1.1 |
nvPosprofNameProfile Name.rw DisplayString .1.3.6.1.4.1.230.5.66.1.3.1.2 |
nvPosprofSizemax bytes per frame
Default value is 128 (0+1).rw Enumeration .1.3.6.1.4.1.230.5.66.1.3.1.3 |
nvPosprofNumchanmax number of channels
Default value is 1.rw INTEGER .1.3.6.1.4.1.230.5.66.1.3.1.4 |
nvPosprofPermchanmin number of channelsrw INTEGER .1.3.6.1.4.1.230.5.66.1.3.1.6 |
nvPosprofDirectionup or down?
Default value is dnlink (1+1).rw Enumeration .1.3.6.1.4.1.230.5.66.1.3.1.7 |
nvPosprofProtocolprotocol on port
Default value is visa.rw Enumeration .1.3.6.1.4.1.230.5.66.1.3.1.8 |
nvPosprofAddrtypeaddress header
Default value is tpdu.rw Enumeration .1.3.6.1.4.1.230.5.66.1.3.1.9 |
nvPosprofUserdatacall user datarw DisplayString .1.3.6.1.4.1.230.5.66.1.3.1.10 |
nvPosprofModeMode of operation.
Default is 7E1.rw Enumeration .1.3.6.1.4.1.230.5.66.1.3.1.11 |
nvPosprofIdletimemax num secs channel can remain idlerw INTEGER .1.3.6.1.4.1.230.5.66.1.3.1.12 |
nvPosprofRoutinglook at data or tpdu?
Default value is tpdurtg (1+1).rw Enumeration .1.3.6.1.4.1.230.5.66.1.3.1.13 |
nvPosprofTranslatemessage translation.rw Enumeration .1.3.6.1.4.1.230.5.66.1.3.1.14 |
nvPosprofTpduaddruse this when tpdu not supplied (but required).rw DisplayString .1.3.6.1.4.1.230.5.66.1.3.1.15 |
nvPosprofEftrsptonumber of seconds before addr table entry cleared
Default value is 300.rw INTEGER .1.3.6.1.4.1.230.5.66.1.3.1.16 |
nvPosprofRetrytimretry timer
Default value is 100.rw INTEGER .1.3.6.1.4.1.230.5.66.1.3.1.17 |
nvPosprofNretrymax retry attempts
Default value is 3.rw INTEGER .1.3.6.1.4.1.230.5.66.1.3.1.18 |
nvPosprofActsuplAction after responce is sent to terminal.rw Enumeration .1.3.6.1.4.1.230.5.66.1.3.1.19 |
nvPosprofResptimhost response timer
Default value is 100.rw INTEGER .1.3.6.1.4.1.230.5.66.1.3.1.20 |
nvPosprofPolltimpoll timer
Default value is 5.rw INTEGER .1.3.6.1.4.1.230.5.66.1.3.1.21 |
nvPosprofPolladdrbase poll address,hexrw DisplayString .1.3.6.1.4.1.230.5.66.1.3.1.22 |
nvPosprofSkipnumber of cycles to skip for non-func device
Default value is 4.rw INTEGER .1.3.6.1.4.1.230.5.66.1.3.1.23 |
nvPosprofTcpmsglenTCP msg header format.
Default value is bin4.rw Enumeration .1.3.6.1.4.1.230.5.66.1.3.1.24 |
nvPosprofPortnameName of physical port or Device Usage Group.rw DisplayString .1.3.6.1.4.1.230.5.66.1.3.1.25 |
nvPosprofRsrcpoolResource Pool Name.rw DisplayString .1.3.6.1.4.1.230.5.66.1.3.1.26 |
nvPosprofStatusOperation status of the record. Use valid to add
record to database file and invalid to delete
record from database file.rw Enumeration .1.3.6.1.4.1.230.5.66.1.3.1.27 |
nvPosconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.66.2 |
nvPosconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.66.2.1 |
nvPosconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.66.2.2 |
nvPosconfTableNEvada node posconf file. SEQUENCE OF NvPosconfEntry .1.3.6.1.4.1.230.5.66.2.3 |
nvPosconfEntryNevada node posprof record. NvPosconfEntry .1.3.6.1.4.1.230.5.66.2.3.1 |
nvPosconfIndexIndex of nevada posconf recordro INTEGER .1.3.6.1.4.1.230.5.66.2.3.1.1 |
nvPosconfNameeither POS# or X.121 Address.rw DisplayString .1.3.6.1.4.1.230.5.66.2.3.1.2 |
nvPosconfEnableEnabled or not.rw Enumeration .1.3.6.1.4.1.230.5.66.2.3.1.3 |
nvPosconfProfileName of profile (in posprof) being used.rw DisplayString .1.3.6.1.4.1.230.5.66.2.3.1.4 |
nvPosconfStatusOperation status of the record. Use valid to add
record to database file and invalid to delete
record from database file.rw Enumeration .1.3.6.1.4.1.230.5.66.2.3.1.5 |
nvPosmsgmap OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.66.3 |
nvPosmsgmapMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.66.3.1 |
nvPosmsgmapNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.66.3.2 |
nvPosmsgmapTableNevada node posmsgmap file. SEQUENCE OF NvPosmsgmapEntry .1.3.6.1.4.1.230.5.66.3.3 |
nvPosmsgmapEntrynevada node posmsgmap record. NvPosmsgmapEntry .1.3.6.1.4.1.230.5.66.3.3.1 |
nvPosmsgmapIndexIndex of nevada posmsgmap recordro INTEGER .1.3.6.1.4.1.230.5.66.3.3.1.1 |
nvPosmsgmapPatternpointer to pattern in string storagerw INTEGER .1.3.6.1.4.1.230.5.66.3.3.1.2 |
nvPosmsgmapDestport/link or X.121 addressrw DisplayString .1.3.6.1.4.1.230.5.66.3.3.1.3 |
nvPosmsgmapStatusOperation status of the record. Use valid to add
record to database file and invalid to delete
record from database file.rw Enumeration .1.3.6.1.4.1.230.5.66.3.3.1.4 |
nvPosniimap OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.66.4 |
nvPosniimapMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.66.4.1 |
nvPosniimapNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.66.4.2 |
nvPosniimapTablenevada node posniimap file. SEQUENCE OF NvPosniimapEntry .1.3.6.1.4.1.230.5.66.4.3 |
nvPosniimapEntryNevada node posniimap record. NvPosniimapEntry .1.3.6.1.4.1.230.5.66.4.3.1 |
nvPosniimapIndexIndex of nevada posniimap recordro INTEGER .1.3.6.1.4.1.230.5.66.4.3.1.1 |
nvPosniimapTpduaddrNII value to matchrw DisplayString .1.3.6.1.4.1.230.5.66.4.3.1.2 |
nvPosniimapDestport/link or X.121 addressrw DisplayString .1.3.6.1.4.1.230.5.66.4.3.1.3 |
nvPosniimapStatusOperation status of the record. Use valid to add
record to database file and invalid to delete
record from database file.rw Enumeration .1.3.6.1.4.1.230.5.66.4.3.1.4 |
nvPosnmsmap OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.66.5 |
nvPosnmsmapMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.66.5.1 |
nvPosnmsmapNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.66.5.2 |
nvPosnmsmapTablenevada node posnmsmap file. SEQUENCE OF NvPosnmsmapEntry .1.3.6.1.4.1.230.5.66.5.3 |
nvPosnmsmapEntrynevada node posnmsmap record. NvPosnmsmapEntry .1.3.6.1.4.1.230.5.66.5.3.1 |
nvPosnmsmapIndexIndex of nevada posnmsmap recordro INTEGER .1.3.6.1.4.1.230.5.66.5.3.1.1 |
nvPosnmsmapNmsidtwo digit hex NMS IDrw DisplayString .1.3.6.1.4.1.230.5.66.5.3.1.2 |
nvPosnmsmapDestport/link or X.121 addressrw DisplayString .1.3.6.1.4.1.230.5.66.5.3.1.3 |
nvPosnmsmapStatusOperation status of the record. Use valid to add
record to database file and invalid to delete
record from database file.rw Enumeration .1.3.6.1.4.1.230.5.66.5.3.1.4 |
nvPosiso OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.66.6 |
nvPosisoMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.66.6.1 |
nvPosisoNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.66.6.2 |
nvPosisoTablenevada node posiso file. SEQUENCE OF NvPosisoEntry .1.3.6.1.4.1.230.5.66.6.3 |
nvPosisoEntrynavada node posiso record. NvPosisoEntry .1.3.6.1.4.1.230.5.66.6.3.1 |
nvPosisoIndexIndex of Nevada posiso recordro INTEGER .1.3.6.1.4.1.230.5.66.6.3.1.1 |
nvPosisoNameused to identify recordrw DisplayString .1.3.6.1.4.1.230.5.66.6.3.1.2 |
nvPosisoContrecpointer to continuation record
Default value is 0.rw INTEGER .1.3.6.1.4.1.230.5.66.6.3.1.3 |
nvPosisoField2same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.4 |
nvPosisoField3same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.5 |
nvPosisoField4same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.6 |
nvPosisoField5same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.7 |
nvPosisoField6same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.8 |
nvPosisoField7same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.9 |
nvPosisoField8same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.10 |
nvPosisoField9same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.11 |
nvPosisoField10same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.12 |
nvPosisoField11same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.13 |
nvPosisoField12same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.14 |
nvPosisoField13same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.15 |
nvPosisoField14same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.16 |
nvPosisoField15same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.17 |
nvPosisoField16same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.18 |
nvPosisoField17same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.19 |
nvPosisoField18same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.20 |
nvPosisoField19same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.21 |
nvPosisoField20same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.22 |
nvPosisoField21same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.23 |
nvPosisoField22same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.24 |
nvPosisoField23same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.25 |
nvPosisoField24same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.26 |
nvPosisoField25same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.27 |
nvPosisoField26same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.28 |
nvPosisoField27same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.29 |
nvPosisoField28same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.30 |
nvPosisoField29same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.31 |
nvPosisoField30same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.32 |
nvPosisoField31same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.33 |
nvPosisoField32same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.34 |
nvPosisoField33same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.35 |
nvPosisoField34same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.36 |
nvPosisoField35same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.37 |
nvPosisoField36same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.38 |
nvPosisoField37same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.39 |
nvPosisoField38same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.40 |
nvPosisoField39same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.41 |
nvPosisoField40same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.42 |
nvPosisoField41same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.43 |
nvPosisoField42same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.44 |
nvPosisoField43same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.45 |
nvPosisoField44same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.46 |
nvPosisoField45same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.47 |
nvPosisoField46same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.48 |
nvPosisoField47same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.49 |
nvPosisoField48same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.50 |
nvPosisoField49same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.51 |
nvPosisoField50same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.52 |
nvPosisoField51same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.53 |
nvPosisoField52same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.54 |
nvPosisoField53same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.55 |
nvPosisoField54same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.56 |
nvPosisoField55same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.57 |
nvPosisoField56same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.58 |
nvPosisoField57same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.59 |
nvPosisoField58same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.60 |
nvPosisoField59same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.61 |
nvPosisoField60same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.62 |
nvPosisoField61same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.63 |
nvPosisoField62same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.64 |
nvPosisoField63same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.65 |
nvPosisoField64same as field1rw NvIsoType .1.3.6.1.4.1.230.5.66.6.3.1.66 |
nvPosisoStatusOperation status of the record. Use valid to add
record to database file and invalid to delete
record from database file.rw Enumeration .1.3.6.1.4.1.230.5.66.6.3.1.67 |
nvPosvisa OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.66.7 |
nvPosvisaMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.66.7.1 |
nvPosvisaNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.66.7.2 |
nvPosvisaTableNevada node posvisa file. SEQUENCE OF NvPosvisaEntry .1.3.6.1.4.1.230.5.66.7.3 |
nvPosvisaEntryNevada node posvisa record. NvPosvisaEntry .1.3.6.1.4.1.230.5.66.7.3.1 |
nvPosvisaIndexIndex of Nevada posvisa recordro INTEGER .1.3.6.1.4.1.230.5.66.7.3.1.1 |
nvPosvisaNameused to identify recordrw DisplayString .1.3.6.1.4.1.230.5.66.7.3.1.2 |
nvPosvisaField1description of a single fieldrw NvVisaType .1.3.6.1.4.1.230.5.66.7.3.1.3 |
nvPosvisaField2same as field1rw NvVisaType .1.3.6.1.4.1.230.5.66.7.3.1.4 |
nvPosvisaField3same as field1rw NvVisaType .1.3.6.1.4.1.230.5.66.7.3.1.5 |
nvPosvisaField4same as field1rw NvVisaType .1.3.6.1.4.1.230.5.66.7.3.1.6 |
nvPosvisaField5same as field1rw NvVisaType .1.3.6.1.4.1.230.5.66.7.3.1.7 |
nvPosvisaField6same as field1rw NvVisaType .1.3.6.1.4.1.230.5.66.7.3.1.8 |
nvPosvisaField7same as field1rw NvVisaType .1.3.6.1.4.1.230.5.66.7.3.1.9 |
nvPosvisaField8same as field1rw NvVisaType .1.3.6.1.4.1.230.5.66.7.3.1.10 |
nvPosvisaField9same as field1rw NvVisaType .1.3.6.1.4.1.230.5.66.7.3.1.11 |
nvPosvisaField10same as field1rw NvVisaType .1.3.6.1.4.1.230.5.66.7.3.1.12 |
nvPosvisaField11same as field1rw NvVisaType .1.3.6.1.4.1.230.5.66.7.3.1.13 |
nvPosvisaField12same as field1rw NvVisaType .1.3.6.1.4.1.230.5.66.7.3.1.14 |
nvPosvisaField13same as field1rw NvVisaType .1.3.6.1.4.1.230.5.66.7.3.1.15 |
nvPosvisaField14same as field1rw NvVisaType .1.3.6.1.4.1.230.5.66.7.3.1.16 |
nvPosvisaField15same as field1rw NvVisaType .1.3.6.1.4.1.230.5.66.7.3.1.17 |
nvPosvisaField16same as field1rw NvVisaType .1.3.6.1.4.1.230.5.66.7.3.1.18 |
nvPosvisaField17same as field1rw NvVisaType .1.3.6.1.4.1.230.5.66.7.3.1.19 |
nvPosvisaField18same as field1rw NvVisaType .1.3.6.1.4.1.230.5.66.7.3.1.20 |
nvPosvisaField19same as field1rw NvVisaType .1.3.6.1.4.1.230.5.66.7.3.1.21 |
nvPosvisaField20same as field1rw NvVisaType .1.3.6.1.4.1.230.5.66.7.3.1.22 |
nvPosvisaStatusOperation status of the record. Use valid to add
record to database file and invalid to delete
record from database file.rw Enumeration .1.3.6.1.4.1.230.5.66.7.3.1.23 |
nvPosstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.66.8 |
nvPosstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.66.8.1 |
nvPosstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.66.8.2 |
nvPosstatTableNevada node posstat file. SEQUENCE OF NvPosstatEntry .1.3.6.1.4.1.230.5.66.8.3 |
nvPosstatEntryNevada node posstat record. NvPosstatEntry .1.3.6.1.4.1.230.5.66.8.3.1 |
nvPosstatIndexIndex of Nevada posstat recordro INTEGER .1.3.6.1.4.1.230.5.66.8.3.1.1 |
nvPosstatNameport/link or X.121 address (matches posconf)ro DisplayString .1.3.6.1.4.1.230.5.66.8.3.1.2 |
nvPosstatNactivchnnumber of active channels
Initial status is 0.ro INTEGER .1.3.6.1.4.1.230.5.66.8.3.1.3 |
nvPosstatProtocolprotocol on portro Enumeration .1.3.6.1.4.1.230.5.66.8.3.1.4 |
nvPosstatNumcallsnumber of calls
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.66.8.3.1.5 |
nvPosstatNfailcallnumber of failed calls
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.66.8.3.1.6 |
nvPosstatNumimsgsnumber of messages from device
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.66.8.3.1.7 |
nvPosstatNumomsgsnumber of messages to device
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.66.8.3.1.8 |
nvPosstatEftreqsnumber of EFT requests
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.66.8.3.1.9 |
nvPosstatEftrspsnumber of EFT responses
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.66.8.3.1.10 |
nvPosstatNmsreqsnumber of NMS requests
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.66.8.3.1.11 |
nvPosstatNmsrspsnumber of NMS responses
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.66.8.3.1.12 |
nvPosstatNodatartEFT reqs discarded becaues msg switch could find route
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.66.8.3.1.13 |
nvPosstatNotpdurtEFT reqs discarded because no match to posniimap entry
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.66.8.3.1.14 |
nvPosstatInvrqtpduEFT reqs discarded because of bad TPDUs
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.66.8.3.1.15 |
nvPosstatNousdestEFT reqs discarded because destination couldn't be matched
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.66.8.3.1.16 |
nvPosstatQueuedEFT reqs discarded because all dest channels or TDPU IDs in use
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.66.8.3.1.17 |
nvPosstatCommfailEFT reqs that couldn't be delivered due to comm failure
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.66.8.3.1.18 |
nvPosstatInvrstpduEFT rsps discarded because they did not contain valid TPDUs
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.66.8.3.1.19 |
nvPosstatDnlnkfailEFT rsps discarded because they did not match any request
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.66.8.3.1.20 |
nvPosstatRspnomtchEFT rsps discarded because they did not match any request
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.66.8.3.1.21 |
nvPosstatConnfailEFT requests lost because of connection failures
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.66.8.3.1.22 |
nvPosstatRsptimoutEFT rsps (map table entries) that were timed out (response lost)
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.66.8.3.1.23 |
nvPosstatNmsbaddstNMS reqs with bad destination addresses
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.66.8.3.1.24 |
nvPosstatNmsbadhstNMS reqs with bad source addresses (no matching host ID in posnmsmap file)
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.66.8.3.1.25 |
nvPosstatNbadframesNMS reqs with bad source addresses (no matching host ID in posnmsmap file)
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.66.8.3.1.26 |
nvPosstatNtoolongNMS reqs with bad source addresses (no matching host ID in posnmsmap file)
Statistic is zeroed at startup time.ro INTEGER .1.3.6.1.4.1.230.5.66.8.3.1.27 |
nvPosstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.66.8.3.1.28 |
nevadaL2tp OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.70 |
nvL2tpconf OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.70.1 |
nvL2tpconfMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.70.1.1 |
nvL2tpconfNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.70.1.2 |
nvL2tpconfTablel2tpconf file. SEQUENCE OF NvL2tpconfEntry .1.3.6.1.4.1.230.5.70.1.3 |
nvL2tpconfEntryl2tpconf record. NvL2tpconfEntry .1.3.6.1.4.1.230.5.70.1.3.1 |
nvL2tpconfIndexIndex of L2tpconf record.ro INTEGER .1.3.6.1.4.1.230.5.70.1.3.1.1 |
nvL2tpconfAdminStatenable l2tp protocol stack.rw Enumeration .1.3.6.1.4.1.230.5.70.1.3.1.2 |
nvL2tpconfAckTimoutacknowlege timeout.rw INTEGER .1.3.6.1.4.1.230.5.70.1.3.1.3 |
nvL2tpconfInactivtyInactivty interval for hello msg.rw INTEGER .1.3.6.1.4.1.230.5.70.1.3.1.4 |
nvL2tpconfRetransmax retransmit before closing.rw INTEGER .1.3.6.1.4.1.230.5.70.1.3.1.5 |
nvL2tpconfIdlemax idle prior to closing tunnelrw INTEGER .1.3.6.1.4.1.230.5.70.1.3.1.6 |
nvL2tpconfStatusOperation status. Add the record to the table (valid) or
delete the record from the table (invalid).rw Enumeration .1.3.6.1.4.1.230.5.70.1.3.1.7 |
nvL2tpstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.70.2 |
nvL2tpstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.70.2.1 |
nvL2tpstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.70.2.2 |
nvL2tpstatTableL2tpstat file. SEQUENCE OF NvL2tpstatEntry .1.3.6.1.4.1.230.5.70.2.3 |
nvL2tpstatEntryL2tpstat record. NvL2tpstatEntry .1.3.6.1.4.1.230.5.70.2.3.1 |
nvL2tpstatIndexIndex of L2tpstat recordro INTEGER .1.3.6.1.4.1.230.5.70.2.3.1.1 |
nvL2tpstatActivTnlsnumber of currently active tunnelro INTEGER .1.3.6.1.4.1.230.5.70.2.3.1.2 |
nvL2tpstatActivSnsnumber of currently active sessionro INTEGER .1.3.6.1.4.1.230.5.70.2.3.1.3 |
nvL2tpstatMlfrmPktnumber of malformed packets received by l2tpro INTEGER .1.3.6.1.4.1.230.5.70.2.3.1.4 |
nvL2tpstatCtrlRecvnumber of control packet receivedro INTEGER .1.3.6.1.4.1.230.5.70.2.3.1.5 |
nvL2tpstatCtrlOofWnumber of control packet received outside of windowro INTEGER .1.3.6.1.4.1.230.5.70.2.3.1.6 |
nvL2tpstatCtrlOofSnumber of control packet received out of sequencero INTEGER .1.3.6.1.4.1.230.5.70.2.3.1.7 |
nvL2tpstatCtrlSendnumber of control packet sentro INTEGER .1.3.6.1.4.1.230.5.70.2.3.1.8 |
nvL2tpstatDataRecvnumber of data packet receivedro INTEGER .1.3.6.1.4.1.230.5.70.2.3.1.9 |
nvL2tpstatDataSendnumber of data packet sentro INTEGER .1.3.6.1.4.1.230.5.70.2.3.1.10 |
nvL2tpstatTnlUnavtunnels not created due to unavailable resourcesro INTEGER .1.3.6.1.4.1.230.5.70.2.3.1.11 |
nvL2tpstatSessUnavnumber session not created due to unavailable resourcesro INTEGER .1.3.6.1.4.1.230.5.70.2.3.1.12 |
nvL2tpstatProtVrsnl2tp protocol version numberro INTEGER .1.3.6.1.4.1.230.5.70.2.3.1.13 |
nvL2tpstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.70.2.3.1.20 |
nvL2tptstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.70.3 |
nvL2tptstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.70.3.1 |
nvL2tptstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.70.3.2 |
nvL2tptstatTableL2tptstat file. SEQUENCE OF NvL2tptstatEntry .1.3.6.1.4.1.230.5.70.3.3 |
nvL2tptstatEntryL2tptstat record. NvL2tptstatEntry .1.3.6.1.4.1.230.5.70.3.3.1 |
nvL2tptstatIndexIndex of L2tptstat recordro INTEGER .1.3.6.1.4.1.230.5.70.3.3.1.1 |
nvL2tptstatLocalTnIDLocal Tunnel Id of the LACro INTEGER .1.3.6.1.4.1.230.5.70.3.3.1.2 |
nvL2tptstatRemotTnIDLocal call id of the LNSro INTEGER .1.3.6.1.4.1.230.5.70.3.3.1.3 |
nvL2tptstatLocalWSizRemote Call Id of the LNSro INTEGER .1.3.6.1.4.1.230.5.70.3.3.1.4 |
nvL2tptstatRemotWSizCall Serial Numberro INTEGER .1.3.6.1.4.1.230.5.70.3.3.1.5 |
nvL2tptstatRmtIPaddrLocal Window Sizero DisplayString .1.3.6.1.4.1.230.5.70.3.3.1.6 |
nvL2tptstatRmtHstNmePPP stat file recordro DisplayString .1.3.6.1.4.1.230.5.70.3.3.1.7 |
nvL2tptstatTunlStateReceived Data Packetsro Enumeration .1.3.6.1.4.1.230.5.70.3.3.1.8 |
nvL2tptstatRecvCtrlReceived Control Packetsro INTEGER .1.3.6.1.4.1.230.5.70.3.3.1.9 |
nvL2tptstatRecvDataReceived Data Packetsro INTEGER .1.3.6.1.4.1.230.5.70.3.3.1.10 |
nvL2tptstatSendCtrlSent Control Packetsro INTEGER .1.3.6.1.4.1.230.5.70.3.3.1.11 |
nvL2tptstatSendDataSent Data Packetsro INTEGER .1.3.6.1.4.1.230.5.70.3.3.1.12 |
nvL2tptstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.70.3.3.1.20 |
nvL2tpsstat OBJECT IDENTIFIER .1.3.6.1.4.1.230.5.70.4 |
nvL2tpsstatMaxRectotal number of records allowed in database file.ro INTEGER .1.3.6.1.4.1.230.5.70.4.1 |
nvL2tpsstatNumRecnumber of records in use.ro INTEGER .1.3.6.1.4.1.230.5.70.4.2 |
nvL2tpsstatTablel2tpsstat file. SEQUENCE OF NvL2tpsstatEntry .1.3.6.1.4.1.230.5.70.4.3 |
nvL2tpsstatEntryl2tpsstat record. NvL2tpsstatEntry .1.3.6.1.4.1.230.5.70.4.3.1 |
nvL2tpsstatIndexIndex of L2tpsstat recordro INTEGER .1.3.6.1.4.1.230.5.70.4.3.1.1 |
nvL2tpsstatTunnelIDLocal Tunnel Id of the LAC.ro INTEGER .1.3.6.1.4.1.230.5.70.4.3.1.2 |
nvL2tpsstatLclCallIDLocal Call Id of the LNS.ro INTEGER .1.3.6.1.4.1.230.5.70.4.3.1.3 |
nvL2tpsstatRmtCallIDRemote Call Id of the LNS.ro INTEGER .1.3.6.1.4.1.230.5.70.4.3.1.4 |
nvL2tpsstatCallSNCall Serial Number.ro INTEGER .1.3.6.1.4.1.230.5.70.4.3.1.5 |
nvL2tpsstatStateState.ro Enumeration .1.3.6.1.4.1.230.5.70.4.3.1.6 |
nvL2tpsstatDeviceNumDevice Number.ro INTEGER .1.3.6.1.4.1.230.5.70.4.3.1.7 |
nvL2tpsstatDataRecvReceived Data Packets.ro INTEGER .1.3.6.1.4.1.230.5.70.4.3.1.8 |
nvL2tpsstatDataSendSent Data Packets.ro INTEGER .1.3.6.1.4.1.230.5.70.4.3.1.9 |
nvL2tpsstatDtresetdate & time statistics last resetro DisplayString .1.3.6.1.4.1.230.5.70.4.3.1.15 |
nvApacsconfDlrtriesnumber of retries to deliver data before disconnecting
Default value of 0
::= { nvApacsconfEntry 13 }
nvApacsconfTimerA OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTIONrw INTEGER .nvApmdmstatEntry.1 |
nvApmdmstatSpeedModem speedro INTEGER .nvApmdmstatEntry.2 |
nvApmdmstatTbcallsTotal Number of calls at this speedro INTEGER .nvApmdmstatEntry.3 |
nvApmdmstatSuccessNumber of successful connectionsro INTEGER .nvApmdmstatEntry.4 |
nvApmdmstatHostclrNumber of calls cleared by the Hostro INTEGER .nvApmdmstatEntry.5 |
nvApmdmstatNwclrNumber of calls cleared by the networkro INTEGER .nvApmdmstatEntry.6 |
nvApmdmstatFltrainNumber of calls that failed to trainro INTEGER .nvApmdmstatEntry.7 |
nvApmdmstatFlsessNumber with no A-blockro INTEGER .nvApmdmstatEntry.8 |
nvApmdmstatTxpktNumber of x.25 packet Txro INTEGER .nvApmdmstatEntry.9 |
nvApmdmstatRxpktNumber of x.25 packet Rxro INTEGER .nvApmdmstatEntry.10 |
nvApmdmstatTxbytesNumber of x.25 bytes of data Txro INTEGER .nvApmdmstatEntry.11 |
nvApmdmstatRxbytesNumber of x.25 bytes of data rxro INTEGER .nvApmdmstatEntry.12 |
nvApmdmstatB1callsNumber of calls greater than call duration timer b1ro INTEGER .nvApmdmstatEntry.13 |
nvApmdmstatB2callsNumber of calls greater than call duration timer b2ro INTEGER .nvApmdmstatEntry.14 |
nvApmdmstatB3callsNumber of calls greater than call duration timer b3ro INTEGER .nvApmdmstatEntry.15 |
nvApmdmstatB4callsNumber of calls greater than call duration timer b4ro INTEGER .nvApmdmstatEntry.16 |
nvApmdmstatB5callsNumber of calls greater than call duration timer b5ro INTEGER .nvApmdmstatEntry.17 |
nvApmdmstatB6callsNumber of calls greater than call duration timer b6ro INTEGER .nvApmdmstatEntry.18 |
nvApmdmstatB7callsNumber of calls greater than call duration timer b7ro INTEGER .nvApmdmstatEntry.19 |
nvApmdmstatDtresetdate & time statistics last resetro DisplayString .nvApmdmstatEntry.20 |