TRELLIX-SENSOR-SMI
The TRELLIX-SENSOR-SMI module defines the Structure of Management Information for Trellix endpoint security sensors, enabling SNMP-based monitoring of host security status, agent health, and threat detection events. It facilitates the collection of critical telemetry metrics such as sensor uptime, policy compliance states, and active intrusion prevention alerts for centralized security information and event management (SIEM) integration.
Imported Objects
Objects
24 total| Object Name |
|---|
ivSensorThe Structure of Management Information for the Trellix enterprise. MODULE-IDENTITY .1.3.6.1.4.1.8962.2.1 |
ivIndex OBJECT IDENTIFIER .1.3.6.1.4.1.8962.2.1.1 |
slotIndexIdentifies the position (starting from 1) of a slot in the chassis.ro Integer32 .1.3.6.1.4.1.8962.2.1.1.1 |
processorIndexProcessor CPU core index (starting from 1) within a sensor card.ro Integer32 .1.3.6.1.4.1.8962.2.1.1.2 |
npIndexNP CPU core index (starting from 1) within a sensor card.ro Integer32 .1.3.6.1.4.1.8962.2.1.1.3 |
mgmtPortIndexManagement port index (starting from 1) on a Sensor management card. Must not exceed a maximum count as specified by the mgmtPortMaxCount object in the vendor specified MIB specified for this mgmt card.ro Integer32 (1) .1.3.6.1.4.1.8962.2.1.1.4 |
intfPortIndexInterface port index (starting from 1) on a sensor analysis card. These ports are also referred to as front-end ports.ro Integer32 .1.3.6.1.4.1.8962.2.1.1.5 |
respPortIndexResponse port index (starting from 1) on a sensor-analysis card.ro Integer32 .1.3.6.1.4.1.8962.2.1.1.6 |
bundleIndexTrellix management system defined bundle number each sensor card belongs to. Valid:1onwards Note: Use cases may use the value '0' to interpret that the notion of 'bundle' is to be ignored.ro Integer32 .1.3.6.1.4.1.8962.2.1.1.7 |
qedIndexQED processor index (starting from 1) on a Sensor management card.ro Integer32 (1) .1.3.6.1.4.1.8962.2.1.1.8 |
sibyteIndexSiByte processor index (starting from 1) on a Sensor management card.ro Integer32 .1.3.6.1.4.1.8962.2.1.1.9 |
rateLimitQueueIndexRatelimit Queue index (starting from 1). For FE ports the index value is between (1 to 6). For GE ports the index value is between (1 to 8)ro Integer32 .1.3.6.1.4.1.8962.2.1.1.10 |
intfPhysicalPortIndexInterface physical port index (starting from 1) on a sensor analysis card. These are applicable to the Load Balancer Solution only.ro Integer32 .1.3.6.1.4.1.8962.2.1.1.11 |
ntpServerIndexNtp Server index (starting from 1). Ntp Server Index value can be either 1 or 2.ro Integer32 .1.3.6.1.4.1.8962.2.1.1.12 |
intfVirtualSlotIndexIdentifies the position (starting from 1) of a slot in the virtual stack.ro Integer32 .1.3.6.1.4.1.8962.2.1.1.13 |
intfVirtualPortIndexInterface virtual port index (starting from 1) on a virtual stack analysis card. These are applicable to the Stack Solution only.ro Integer32 .1.3.6.1.4.1.8962.2.1.1.14 |
sslProbeIpv4Indexro Integer32 .1.3.6.1.4.1.8962.2.1.1.15 |
processorNumIndexro Integer32 .1.3.6.1.4.1.8962.2.1.1.16 |
sslProbeIpv6Indexro Integer32 .1.3.6.1.4.1.8962.2.1.1.17 |
ivSensorConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.8962.2.1.2 |
ivSensorPerformance OBJECT IDENTIFIER .1.3.6.1.4.1.8962.2.1.3 |
ivSensorTraps OBJECT IDENTIFIER .1.3.6.1.4.1.8962.2.1.4 |
ivFirewallConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.8962.2.1.5 |
ivFirewallPerformance OBJECT IDENTIFIER .1.3.6.1.4.1.8962.2.1.6 |
More MIBs from MUSARUBRA US
Browse all MUSARUBRA USMIBs →The TRELLIX-SENSOR-CONF-MIB provides read-write management of Trellix IntruShield sensor node configurations, specifically defining parameters for node identification, EMS connectivity, chassis and card topology, network interface assignments, and packet logging or SSL security settings. This module enables administrators to programmatically configure the operational identity, hardware slot mapping, and service parameters of the IntruShield intrusion detection system.
The TRELLIX-SENSOR-PERF-MIB enables SNMP-based monitoring of performance metrics for Trellix Endpoint Security (formerly McAfee) sensors, specifically tracking resource utilization, process health, and system load statistics to facilitate capacity planning and anomaly detection.
The MCAFEE-ATD-MIB module enables SNMP-based monitoring and management of McAfee Advanced Threat Defense (ATD) appliances, specifically tracking sandboxing engine status, file analysis queue depths, and threat detection event counters within the enterprise.mcafee-intruder MIB tree.
TRELLIX-INTRUVERT-TC defines the standardized textual conventions and data types required for parsing and interpreting management information across Trellix Intruvert security appliances and enterprise software. These conventions ensure consistent representation of security events, system states, and policy metrics within the broader Trellix MIB ecosystem.
The MCAFEE-INTRUVERT-SMI module defines the Structure of Management Information for monitoring McAfee Intruvert intrusion prevention and detection systems, specifically enabling the retrieval of security event logs, threat signatures, and intrusion alert counters via SNMP. This module facilitates the centralized collection of real-time intrusion detection metrics and system status data for enterprise security operations.
The TRELLIX-INTRUVERT-SMI module defines the Structure of Management Information for monitoring and managing Trellix Intruvert intrusion prevention and detection systems, enabling the retrieval of security event logs, alert states, and system health metrics via SNMP.