TPT-TPA-HARDWARE-MIB
AI MIB Summary
The TPT-TPA-HARDWARE-MIB provides SNMP access to monitor the physical state and component health of Trend Micro TippingPoint Network Security Appliances (TPA), including hardware status, temperature sensors, and power supply metrics. This module enables systems administrators to track hardware-specific performance indicators and fault conditions for Trend Micro's intrusion prevention and network security infrastructure.
Hardware definition of a TPA and its components. Copyright (C) 2016 Trend Micro Incorporated. All Rights Reserved. Trend Micro makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Trend Micro shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This document contains proprietary information, which is protected by copyright. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of Trend Micro. The information is provided 'as is' without warranty of any kind and is subject to change without notice. The only warranties for Trend Micro products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Trend Micro shall not be liable for technical or editorial errors or omissions contained herein. TippingPoint(R), the TippingPoint logo, and Digital Vaccine(R) are registered trademarks of Trend Micro. All other company and product names may be trademarks of their respective holders. All rights reserved. This document contains confidential information, trade secrets or both, which are the property of Trend Micro. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from Trend Micro or one of its subsidiaries. All other company and product names may be trademarks of their respective holders.
Main OID:
tpt_tpa_hardware_objs.1.3.6.1.4.1.10734.3.3.2.3
97
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
97 total| Object Name |
|---|
tpt_tpa_hardware_objsHardware definition of a TPA and its components. Copyright (C) 2016 Trend Micro Incorporated. All Rights Reserved. Trend Micro makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Trend Micro shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This document contains proprietary information, which is protected by copyright. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of Trend Micro. The information is provided 'as is' without warranty of any kind and is subject to change without notice. The only warranties for Trend Micro products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Trend Micro shall not be liable for technical or editorial errors or omissions contained herein. TippingPoint(R), the TippingPoint logo, and Digital Vaccine(R) are registered trademarks of Trend Micro. All other company and product names may be trademarks of their respective holders. All rights reserved. This document contains confidential information, trade secrets or both, which are the property of Trend Micro. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from Trend Micro or one of its subsidiaries. All other company and product names may be trademarks of their respective holders. MODULE-IDENTITY .1.3.6.1.4.1.10734.3.3.2.3 |
hw_slotTableTable of slots/ports on the device. Unknown .1.3.6.1.4.1.10734.3.3.2.3.1 |
hw_slotEntryAn entry in the slot/port table. Rows cannot be created or deleted. Unknown .1.3.6.1.4.1.10734.3.3.2.3.1.1 |
slotNumberSlot number for this hardware element.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.1.1.1 |
slotPortPort number for this hardware element (0 refers to the board).ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.1.1.2 |
slotTypeType of hardware element corresponding to slot/port.ro ManagedElementType .1.3.6.1.4.1.10734.3.3.2.3.1.1.3 |
slotCfgTypeThe configuration/redundancy of a hardware element.ro ConfigRedundancy .1.3.6.1.4.1.10734.3.3.2.3.1.1.4 |
slotRunStateThe high-level hardware state (active, initializing, standby, etc.).ro HardwareState .1.3.6.1.4.1.10734.3.3.2.3.1.1.5 |
slotQualifier1Further qualification/detail on the high-level hardware state.ro HardwareStateQual .1.3.6.1.4.1.10734.3.3.2.3.1.1.6 |
slotQualifier2Further qualification/detail on the high-level hardware state.ro HardwareStateQual .1.3.6.1.4.1.10734.3.3.2.3.1.1.7 |
slotQualifier3Further qualification/detail on the high-level hardware state.ro HardwareStateQual .1.3.6.1.4.1.10734.3.3.2.3.1.1.8 |
slotQualifier4Further qualification/detail on the high-level hardware state.ro HardwareStateQual .1.3.6.1.4.1.10734.3.3.2.3.1.1.9 |
slotStartTimeThe time (seconds) at which this hardware element was powered up.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.1.1.10 |
slotVendorIDThe identifying number of the vendor of this hardware.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.1.1.11 |
slotDeviceIDThe PCI bus device ID for this slot.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.1.1.12 |
slotProductIDVersioning and other inventory information for this hardware element.ro OCTET STRING .1.3.6.1.4.1.10734.3.3.2.3.1.1.13 |
slotFPGAVersionThe version of the TPT FPGA chip on this hardware.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.1.1.14 |
slotInterfaceThe entry in the IF-MIB interface table that corresponds to this port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.10734.3.3.2.3.1.1.15 |
slotLineTypeThe line type (e.g., copper or optical) of the port.ro LineType .1.3.6.1.4.1.10734.3.3.2.3.1.1.16 |
slotDuplexStateThe current duplex state (full or half) of the port.ro DuplexState .1.3.6.1.4.1.10734.3.3.2.3.1.1.17 |
slotPhysicalPhysical port number for this hardware element (0 if not a port).ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.1.1.18 |
slotSfpQualifier1Type of the SFP transceiverro SfpQualifier .1.3.6.1.4.1.10734.3.3.2.3.1.1.19 |
slotSfpQualifier2Type of the SFP transceiver. This is applicable to the dual speed transceivers, and this variable will have value of the second speed supported by those transceivers. For single-speed transceivers, the value will be not applicable.ro SfpQualifier .1.3.6.1.4.1.10734.3.3.2.3.1.1.20 |
hw_chasTableTable of chassis data for the device. Represented as a table with one row, and that row is the same as that for other managed elements. Unknown .1.3.6.1.4.1.10734.3.3.2.3.2 |
hw_chasEntryAn entry in the chassis table. Rows cannot be created or deleted. Unknown .1.3.6.1.4.1.10734.3.3.2.3.2.1 |
chasNumberNumber for this entry in the chassis table. Should always be 0.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.2.1.1 |
chasTypeType of hardware element -- should always be chassis or unequip.ro ManagedElementType .1.3.6.1.4.1.10734.3.3.2.3.2.1.3 |
chasCfgTypeThe configuration/redundancy of a hardware element.ro ConfigRedundancy .1.3.6.1.4.1.10734.3.3.2.3.2.1.4 |
chasRunStateThe high-level hardware state (active, initializing, standby, etc.).ro HardwareState .1.3.6.1.4.1.10734.3.3.2.3.2.1.5 |
chasQualifier1Further qualification/detail on the high-level hardware state.ro HardwareStateQual .1.3.6.1.4.1.10734.3.3.2.3.2.1.6 |
chasQualifier2Further qualification/detail on the high-level hardware state.ro HardwareStateQual .1.3.6.1.4.1.10734.3.3.2.3.2.1.7 |
chasQualifier3Further qualification/detail on the high-level hardware state.ro HardwareStateQual .1.3.6.1.4.1.10734.3.3.2.3.2.1.8 |
chasQualifier4Further qualification/detail on the high-level hardware state.ro HardwareStateQual .1.3.6.1.4.1.10734.3.3.2.3.2.1.9 |
chasStartTimeThe time (seconds) at which the hardware element was powered up.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.2.1.10 |
chasVendorIDThe identifying number of the vendor of this hardware.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.2.1.11 |
chasDeviceIDAn identifying number specific to this device.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.2.1.12 |
chasProductIDVersioning and other inventory information for this hardware element.ro OCTET STRING .1.3.6.1.4.1.10734.3.3.2.3.2.1.13 |
chasFPGAVersionThe version of the TPT FPGA chip on this hardware.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.2.1.14 |
hw_fanTableTable of fans on the device. Unknown .1.3.6.1.4.1.10734.3.3.2.3.3 |
hw_fanEntryAn entry in the fan table. Rows cannot be created or deleted. Unknown .1.3.6.1.4.1.10734.3.3.2.3.3.1 |
fanSubunitNumber of fan sub-unit (0 for controller).ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.3.1.1 |
fanTypeType of hardware element -- should always be fan or unequip.ro ManagedElementType .1.3.6.1.4.1.10734.3.3.2.3.3.1.3 |
fanCfgTypeThe configuration/redundancy of a hardware element.ro ConfigRedundancy .1.3.6.1.4.1.10734.3.3.2.3.3.1.4 |
fanRunStateThe high-level hardware state (active, initializing, standby, etc.).ro HardwareState .1.3.6.1.4.1.10734.3.3.2.3.3.1.5 |
fanQualifier1Further qualification/detail on the high-level hardware state.ro HardwareStateQual .1.3.6.1.4.1.10734.3.3.2.3.3.1.6 |
fanQualifier2Further qualification/detail on the high-level hardware state.ro HardwareStateQual .1.3.6.1.4.1.10734.3.3.2.3.3.1.7 |
fanQualifier3Further qualification/detail on the high-level hardware state.ro HardwareStateQual .1.3.6.1.4.1.10734.3.3.2.3.3.1.8 |
fanQualifier4Further qualification/detail on the high-level hardware state.ro HardwareStateQual .1.3.6.1.4.1.10734.3.3.2.3.3.1.9 |
fanStartTimeThe time (seconds) at which the hardware element was powered up.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.3.1.10 |
fanVendorIDThe identifying number of the vendor of this hardware.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.3.1.11 |
fanDeviceIDAn identifying number specific to this device.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.3.1.12 |
fanProductIDVersioning and other inventory information for this hardware element.ro OCTET STRING .1.3.6.1.4.1.10734.3.3.2.3.3.1.13 |
fanFPGAVersionThe version of the TPT FPGA chip on this hardware.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.3.1.14 |
hw_psTableTable of power supplies on the device. Unknown .1.3.6.1.4.1.10734.3.3.2.3.4 |
hw_psEntryAn entry in the power supply table. Rows cannot be created or deleted. Unknown .1.3.6.1.4.1.10734.3.3.2.3.4.1 |
psSubunitNumber of power supply sub-unit (0 for controller).ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.4.1.1 |
psTypeType of hardware element -- should always be power-supply or unequip.ro ManagedElementType .1.3.6.1.4.1.10734.3.3.2.3.4.1.3 |
psCfgTypeThe configuration/redundancy of a hardware element.ro ConfigRedundancy .1.3.6.1.4.1.10734.3.3.2.3.4.1.4 |
psRunStateThe high-level hardware state (active, initializing, standby, etc.).ro HardwareState .1.3.6.1.4.1.10734.3.3.2.3.4.1.5 |
psQualifier1Further qualification/detail on the high-level hardware state.ro HardwareStateQual .1.3.6.1.4.1.10734.3.3.2.3.4.1.6 |
psQualifier2Further qualification/detail on the high-level hardware state.ro HardwareStateQual .1.3.6.1.4.1.10734.3.3.2.3.4.1.7 |
psQualifier3Further qualification/detail on the high-level hardware state.ro HardwareStateQual .1.3.6.1.4.1.10734.3.3.2.3.4.1.8 |
psQualifier4Further qualification/detail on the high-level hardware state.ro HardwareStateQual .1.3.6.1.4.1.10734.3.3.2.3.4.1.9 |
psStartTimeThe time (seconds) at which the hardware element was powered up.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.4.1.10 |
psVendorIDThe identifying number of the vendor of this hardware.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.4.1.11 |
psDeviceIDAn identifying number specific to this device.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.4.1.12 |
psProductIDVersioning and other inventory information for this hardware element.ro OCTET STRING .1.3.6.1.4.1.10734.3.3.2.3.4.1.13 |
psFPGAVersionThe version of the TPT FPGA chip on this hardware.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.4.1.14 |
hw_pemTableTable of power entry modules on the device. Unknown .1.3.6.1.4.1.10734.3.3.2.3.5 |
hw_pemEntryAn entry in the power supply table. Rows cannot be created or deleted. Unknown .1.3.6.1.4.1.10734.3.3.2.3.5.1 |
pemSubunitNumber of power entry module sub-unit (0 for controller).ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.5.1.1 |
pemTypeType of hardware element -- should always be pem or unequip.ro ManagedElementType .1.3.6.1.4.1.10734.3.3.2.3.5.1.3 |
pemCfgTypeThe configuration/redundancy of a hardware element.ro ConfigRedundancy .1.3.6.1.4.1.10734.3.3.2.3.5.1.4 |
pemRunStateThe high-level hardware state (active, initializing, standby, etc.).ro HardwareState .1.3.6.1.4.1.10734.3.3.2.3.5.1.5 |
pemQualifier1Further qualification/detail on the high-level hardware state.ro HardwareStateQual .1.3.6.1.4.1.10734.3.3.2.3.5.1.6 |
pemQualifier2Further qualification/detail on the high-level hardware state.ro HardwareStateQual .1.3.6.1.4.1.10734.3.3.2.3.5.1.7 |
pemQualifier3Further qualification/detail on the high-level hardware state.ro HardwareStateQual .1.3.6.1.4.1.10734.3.3.2.3.5.1.8 |
pemQualifier4Further qualification/detail on the high-level hardware state.ro HardwareStateQual .1.3.6.1.4.1.10734.3.3.2.3.5.1.9 |
pemStartTimeThe time (seconds) at which the hardware element was powered up.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.5.1.10 |
pemVendorIDThe identifying number of the vendor of this hardware.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.5.1.11 |
pemDeviceIDAn identifying number specific to this device.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.5.1.12 |
pemProductIDVersioning and other inventory information for this hardware element.ro OCTET STRING .1.3.6.1.4.1.10734.3.3.2.3.5.1.13 |
pemFPGAVersionThe version of the TPT FPGA chip on this hardware.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.5.1.14 |
hw_numSlotsThe number of slots for this device.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.6 |
hw_numFansThe number of fan subunits for this device.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.7 |
hw_numPowerSuppliesThe number of power supply subunits for this device.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.8 |
hw_numPEMsThe number of PEM subunits for this device.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.2.3.9 |
hw_certificateNumberThe hardware certficate number of the device.ro OCTET STRING .1.3.6.1.4.1.10734.3.3.2.3.10 |
hw_serialNumberThe hardware serial number of the device.ro OCTET STRING .1.3.6.1.4.1.10734.3.3.2.3.11 |
tptHardwareNotifyNotification: Used to inform the management station of changes in hardware state on the device. NOTIFICATION-TYPE .1.3.6.1.4.1.10734.3.3.3.0.7 |
tptHardwareNotifyDeviceIDThe unique identifier of the device sending this notification.ro OCTET STRING .1.3.6.1.4.1.10734.3.3.3.1.1 |
tptHardwareNotifySlotThe slot of the hardware whose state has changed. If the hardware element is not a board, this value identifies it as a chassis, fan, power supply, PEM, etc.ro ExtendedSlot .1.3.6.1.4.1.10734.3.3.3.1.2 |
tptHardwareNotifyPortThe port or sub-unit number of the hardware whose state has changed. Zero for a board, chassis, fan controller, power supply, or power entry module.ro Unsigned32 .1.3.6.1.4.1.10734.3.3.3.1.3 |
tptHardwareNotifyMeTypeThe type of the managed element (e.g., backplane, controller, power supply, fan, etc.) whose state has changed.ro ManagedElementType .1.3.6.1.4.1.10734.3.3.3.1.4 |
tptHardwareNotifyCfgTypeThe configuration/redundancy of the hardware whose state has changed.ro ConfigRedundancy .1.3.6.1.4.1.10734.3.3.3.1.5 |
tptHardwareNotifyHlStateThe high-level hardware state (active, initializing, standby, etc.).ro HardwareState .1.3.6.1.4.1.10734.3.3.3.1.6 |
tptHardwareNotifyHlStateQualFurther qualification/detail on the high-level state.ro HardwareStateQual .1.3.6.1.4.1.10734.3.3.3.1.7 |