Home/Catalog/TIMETRA-SAS-SYSTEM-MIB

TIMETRA-SAS-SYSTEM-MIB

AI MIB Summary

The TIMETRA-SAS-SYSTEM-MIB provides vendor-specific SNMP objects for provisioning and monitoring system-level features on Alcatel-Lucent 7x50 Series Service Access Switches. It enables management of core device parameters such as system configuration, operational status, and hardware resources specific to the Alcatel proprietary SAS architecture.

This document is the System SNMP MIB module for the Alcatel 7x50 device. The System MIB module defines SNMP objects to manage and provision system features. Copyright 2003-2014 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Main OID:
timetraSASysMIBModule.1.3.6.1.4.1.6527.6.2.1.1.7
280
Objects
Active
Status
9
Dependencies

Imported Objects

SNMPv2-SMI
SNMPv2-CONF
SNMPv2-TC
TIMETRA-SAS-GLOBAL-MIB
TIMETRA-GLOBAL-MIB
TIMETRA-TC-MIB
TIMETRA-CHASSIS-MIB
IF-MIB
INET-ADDRESS-MIB

Objects

280 total
Object Name
timetraSASysMIBModuleThis document is the System SNMP MIB module for the Alcatel 7x50 device. The System MIB module defines SNMP objects to manage and provision system features. Copyright 2003-2014 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY
.1.3.6.1.4.1.6527.6.2.1.1.7
tmnxSASSysConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.1.3
tmnxSASSysCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.1.3.1
tmnxSASSysGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.1.3.2
tmnxSASSysSecConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.1.3.4
tmnxSASSysSecGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.1.3.4.1
tmnxSASChassisGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.1.10
tmnxSASSysObjs
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.2.5
sysSASBofInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.2.5.11
sbiUplinkAPortPrimary bof port used for autoconfig. When set to zero 'uplinAport' would be resetrw
InterfaceIndexOrZero (IF-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.11.1
sbiUplinkAIpAddrPrimary bof port ip addressrw
IpAddress
.1.3.6.1.4.1.6527.6.2.2.2.5.11.2
sbiUplinkAMaskThe value of sbiActiveIpMask specifies the mask length of the subnet associated with the IP address of the primary bof port.rw
IpAddressPrefixLength (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.11.3
sbiUplinkAVlanVlan tag to be used on uplinkA, if set to -1 packets are sent out without vlan tagrw
Integer32 (-1..4094)
.1.3.6.1.4.1.6527.6.2.2.2.5.11.5
sbiUplinkBPortSecondary bof port used for autoconfig. When set to zero 'uplinBport' would be resetrw
InterfaceIndexOrZero (IF-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.11.6
sbiUplinkBIpAddrSecondary bof port ip addressrw
IpAddress
.1.3.6.1.4.1.6527.6.2.2.2.5.11.7
sbiUplinkBMaskThe value of sbiActiveIpMask specifies the mask length of the subnet associated with the IP address of the bof uplink B port.rw
IpAddressPrefixLength (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.11.8
sbiUplinkBVlanVlan tag to be used on uplinkB, if set to -1 packets are sent out without vlan tagrw
Integer32 (-1..4094)
.1.3.6.1.4.1.6527.6.2.2.2.5.11.10
sbiPingAddressIP address to be used for ping-test after booting. This is the last step in the auto-init processrw
IpAddress
.1.3.6.1.4.1.6527.6.2.2.2.5.11.11
sbiUplinkRouteTableThe sbiUplinkRouteTable contains an entry for each static route configured for the given uplink A or B. These static routes are only used during the system bootup
SEQUENCE OF SbiUplinkRouteEntry
.1.3.6.1.4.1.6527.6.2.2.2.5.11.12
sbiUplinkRouteEntryEach row entry contains information about a static route configured for the inband mangement. Entries in this table can be created and deleted via SNMP SET operations to sbiUplinkRouteRowStatus.
SbiUplinkRouteEntry
.1.3.6.1.4.1.6527.6.2.2.2.5.11.12.1
sbiUplinkAorBIf set to 1 this route is for the uplinkA, if it is set to 2 it is for uplinkB
Unsigned32 (1|2)
.1.3.6.1.4.1.6527.6.2.2.2.5.11.12.1.1
sbiUplinkRouteDestThe value of 'sbiUplinkBofRouteDest' specifies the destination IP address of this static route.
IpAddress
.1.3.6.1.4.1.6527.6.2.2.2.5.11.12.1.2
sbiUplinkRouteMaskThe value of sbiUplinkRouteMask specifies the length of the subnet mask associated with the destination IP address of this static route.
IpAddressPrefixLength (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.11.12.1.3
sbiUplinkRouteNextHopThe value of sbiUplinkRouteNextHop specifies the IP address of the next hop for this static route. This IP address should be in the same subnet as the ethernet port on the active CPM. The value of sbiUplinkRouteNextHop must be set to a valid IP address for the row creation to succeed.rw
IpAddress
.1.3.6.1.4.1.6527.6.2.2.2.5.11.12.1.4
sbiUplinkRouteRowStatussbiUplinkRouteRowStatus controls the creation and deletion of rows in the table. To create a row in this table, set the row status to createAndGo(4)'. The value of sbiUplinkRouteNextHop must also be set to a valid IP address for the row creation to succeed. To delete a row in this table, set the row status to delete(6).rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.5.11.12.1.5
sbiNoServicePortOneThe value of sbiNoServicePortOne indicates service traffic on the port identified by this InterfaceIndex is disabled.rw
InterfaceIndexOrZero (IF-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.11.13
sbiNoServicePortTwoThe value of sbiNoServicePortTwo indicates service traffic on the port identified by this InterfaceIndex is disabled.rw
InterfaceIndexOrZero (IF-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.11.14
sbiUplinkAdminModesbiUplinkAdminMode when set to access-uplink, bof uplink would be used in l2 mode,the default mode is networkrw
Enumeration
.1.3.6.1.4.1.6527.6.2.2.2.5.11.15
sbiUplinkOperModesbiUplinkOperMode is operational mode of the system. This object is initialized during system bootup based on sbiUplinkAdminMode settingro
Enumeration
.1.3.6.1.4.1.6527.6.2.2.2.5.11.16
sbiExpansionCardTypesbiExpansionCardType identifies the expansion card type to the system before boot up. The system will not allow for provisioning of a different MDA than the one currently specified in the BOF. Changes to sbiExpansionCardType equires a reboot to take effectrw
Enumeration
.1.3.6.1.4.1.6527.6.2.2.2.5.11.17
sbiConsoleDisabledThe value of sbiConsoleDisabled determines whether or not the system console is disabled. When set to 'true' console is disabled.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.5.11.18
sbiPasswordsbiPassword is used to enable the user to configure the bof password.rw
OCTET STRING
.1.3.6.1.4.1.6527.6.2.2.2.5.11.19
sbiUplinkAAutoNegotiateThe value of sbiUplinkAAutoNegotiate determines whether or not the speed and duplex parameters will be automatically negotiated on the uplinkAport. When set to 'true', auto-negotiation is enabled.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.5.11.20
sbiUplinkASpeedThe value of sbiSpeed specifies the speed of the uplinkA port. This value is ignored if auto-negotiation is enabled.rw
Unsigned32 (10|100|1000) UNITS "Mbps"
.1.3.6.1.4.1.6527.6.2.2.2.5.11.21
sbiUplinkADuplexThe value of sbiDuplex specifies the duplex mode for the uplinkA port. This value is ignored if auto-negotiation is enabled.rw
Enumeration
.1.3.6.1.4.1.6527.6.2.2.2.5.11.22
sbiUplinkBAutoNegotiateThe value of sbiUplinkBAutoNegotiate determines whether or not the speed and duplex parameters will be automatically negotiated on the uplinkBport. When set to 'true', auto-negotiation is enabled.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.5.11.23
sbiUplinkBSpeedThe value of sbiSpeed specifies the speed of the uplinkB port. This value is ignored if auto-negotiation is enabled.rw
Unsigned32 (10|100|1000) UNITS "Mbps"
.1.3.6.1.4.1.6527.6.2.2.2.5.11.24
sbiUplinkBDuplexThe value of sbiDuplex specifies the duplex mode for the uplinkB port. This value is ignored if auto-negotiation is enabled.rw
Enumeration
.1.3.6.1.4.1.6527.6.2.2.2.5.11.25
sysEthMgmtBofInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.2.5.12
sbiEthMgmtDisabledThe value of sbiEthMgmtDisabled determines whether or not the out of band ethernet management port is enabled. When set to 'true', out of band ethernet management port is disabled.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.5.12.1
sbiEthMgmtActiveIpAddrThe value of sbiEthMgmtActiveIpAddr specifies the IP address of the out of band ethernet port.rw
IpAddress
.1.3.6.1.4.1.6527.6.2.2.2.5.12.2
sbiEthMgmtActiveIpMaskThe value of sbiEthMgmtActiveIpMask specifies the mask length of the subnet associated with the IP address of the out of band ethernet port.rw
IpAddressPrefixLength (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.12.3
sbiEthMgmtAutoNegotiateThe value of sbiEthMgmtAutoNegotiate determines whether or not the speed and duplex parameters will be automatically negotiated on the out of band ethernet port.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.5.12.4
sbiEthMgmtSpeedThe value of sbiEthMgmtSpeed specifies the speed of the out of band ethernet port. This value is ignored if auto-negotiation is enabled.rw
Unsigned32 (10|100) UNITS "Mbps"
.1.3.6.1.4.1.6527.6.2.2.2.5.12.5
sbiEthMgmtDuplexThe value of sbiEthMgmtDuplex specifies the duplex mode for the out of band ethernet port. This value is ignored if auto-negotiation is enabled.rw
Enumeration
.1.3.6.1.4.1.6527.6.2.2.2.5.12.6
sbiEthMgmtStaticRouteTableThe sbiEthMgmtStaticRouteTable contains an entry for each static route configured for the out of band ethernet port. These static routes are only used to route traffic generated by the out of band ethernet port.The table can have upto a maximum of 10 entries.
SEQUENCE OF SbiEthMgmtStaticRouteEntry
.1.3.6.1.4.1.6527.6.2.2.2.5.12.7
sbiEthMgmtStaticRouteEntryEach row entry contains information about a static route configured for the out of band ethernet port. Entries in this table can be created and deleted via SNMP SET operations to sbiEthMgmtStaticRouteRowStatus.
SbiEthMgmtStaticRouteEntry
.1.3.6.1.4.1.6527.6.2.2.2.5.12.7.1
sbiEthMgmtStaticRouteDestThe value of sbiEthMgmtStaticRouteDest specifies the destination IP address of this static route.
IpAddress
.1.3.6.1.4.1.6527.6.2.2.2.5.12.7.1.1
sbiEthMgmtStaticRouteMaskThe value of sbiEthMgmtStaticRouteMask specifies the length of the subnet mask associated with the destination IP address of this static route.
IpAddressPrefixLength (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.12.7.1.2
sbiEthMgmtStaticRouteNextHopThe value of sbiEthMgmtStaticRouteNextHop specifies the IP address of the next hop for this static route. This IP address should be in the same subnet as the ethernet port on the active CPM. The value of sbiEthMgmtStaticRouteNextHop must be set to a valid IP address for the row creation to succeed.rw
IpAddress
.1.3.6.1.4.1.6527.6.2.2.2.5.12.7.1.3
sbiEthMgmtStaticRouteRowStatussbiEthMgmtStaticRouteRowStatus controls the creation and deletion of rows in the table. To create a row in this table, set the row status to createAndGo(4)'. The value of sbiEthMgmtStaticRouteNextHop must also be set to a valid IP address for the row creation to succeed. To delete a row in this table, set the row status to delete(6).rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.5.12.7.1.4
sysMpointMgmtInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.2.5.15
tSASMpointBwPlcyThe value of multipoint bandwidth management policy.rw
TNamedItem (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.15.1
sysLoopBackInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.2.5.16
sysLoopbackNoServPortSecond loopback port used for internal sap creationrw
TmnxPortID (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.16.1
sysMirrorLoopbackNoServPortLoopback port for mirroringrw
TmnxPortID (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.16.2
sysTestHdNoServPortLoopback port for testheadrw
TmnxPortID (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.16.3
sysResourceProfInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.2.5.17
sysG8032FastFloodEnableEnable disable G.8032 fast flood enablerw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.1
sysResIngTcamSapIngAclsysResIngTcamSapIngAcl sets the resource to be used for Sap Ingress Acl applicationrw
TSysResource (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.2
sysResIngTcamIngAclMacsysResIngTcamIngAclMac sets the resource to be used for mac match from the allocated sysResIngTcamSapIngAclrw
TSysResource (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.3
sysResIngTcamIngAclIpv4sysResIngTcamIngAclIpv4 sets the resource to be used for ipv4 match from the allocated sysResIngTcamSapIngAclrw
TSysResource (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.4
sysResIngTcamIngAcl64bitIpv4Ipv6sysResIngTcamIngAcl64bitIpv4 sets the resource to be used for ipv6 64 bit match from the allocated sysResIngTcamSapIngAclrw
TSysResource (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.5
sysResIngTcamIngAcl128bitIpv4Ipv6sysResIngTcamIngAcl128bitIpv4Ipv6 sets the resource to be used for ipv6 128 bit match from the allocated sysResIngTcamSapIngAclrw
TSysResource (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.6
sysResIngTcamIngAcl64bitIpv6OnlysysResIngTcamIngAcl64bitIpv6Only sets the resource to be used for Ipv6 64 bit match only from the allocated sysResIngTcamSapIngAclrw
TSysResource (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.7
sysResIngSapIngClasssysResIngSapIngClass sets the resource to be used for Sap Ingress classificationrw
TSysResource (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.8
sysResIngSapIngClassMacsysResIngSapIngClassMac sets the resource to be used for mac match from the allocated sysResIngSapIngClassrw
TSysResource (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.9
sysResIngSapIngClassIpv4sysResIngSapIngClassIpv4 sets the resource to be used for ipv4 match from the allocated sysResIngSapIngClassrw
TSysResource (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.10
sysResIngSapIngClassIpv4Ipv6sysResIngSapIngClassIpv4Ipv4Ipv6 sets the resource to be used for ipv4, ipv6 match from the allocated sysResIngSapIngClassrw
TSysResource (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.11
sysResFabricPathBandwidthThis object is used to configure the system fabric path bandwidthrwobsolete
Enumeration
.1.3.6.1.4.1.6527.6.2.2.2.5.17.12
sysResMaxIPv6RoutesSpecifies the number of routes to be reserved for use by IPv6. If the value is -1, then there is no limit.rw
Integer32 (-1..16000)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.13
sysResIngTcamEthCfmsysResIngTcamEthCfm sets the resource to be used for Eth Cfm applicationrw
TSysResource (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.14
sysResIngTcamEthCfmUpMepsysResIngTcamEthCfmUpMep sets the resource to be used for Up MEP from the allocated sysResIngTcamEthCfmrw
TSysResource (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.15
sysG8032FastFloodEnableOperValShows current active value of sysG8032FastFloodEnablero
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.16
sysResEgrTcamSapEgrAclsysResEgrTcamSapEgrAcl sets the resource to be used for Sap Egress Acl applicationrw
TSysResource (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.17
sysResEgrTcamEgrAclMacsysResEgrTcamEgrAclMac sets the resource to be used for mac match from the allocated sysResEgrTcamSapEgrAclrw
TSysResource (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.18
sysResEgrTcamEgrAclIpv4sysResEgrTcamEgrAclIpv4 sets the resource to be used for ipv4 match from the allocated sysResEgrTcamSapEgrAclrw
TSysResource (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.19
sysResEgrTcamEgrAcl64bitIpv4Ipv6sysResEgrTcamEgrAcl64bitIpv4 sets the resource to be used for ipv6 64 bit match from the allocated sysResEgrTcamSapEgrAclrw
TSysResource (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.20
sysResEgrTcamEgrAcl128bitIpv4Ipv6sysResEgrTcamEgrAcl128bitIpv4Ipv6 sets the resource to be used for ipv6 128 bit match from the allocated sysResEgrTcamSapEgrAclrw
TSysResource (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.21
sysResEgrTcamEgrAcl64bitIpv6OnlysysResEgrTcamEgrAcl64bitIpv6Only sets the resource to be used for Ipv6 64 bit match only from the allocated sysResEgrTcamSapEgrAclrw
TSysResource (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.22
sysResEgrSapEgrClasssysResEgrSapEgrClass sets the resource to be used for Sap Egress classificationrw
TSysResource (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.23
sysResEgrSapEgrClassMacsysResEgrSapEgrClassMac sets the resource to be used for mac match from the allocated sysResEgrSapEgrClassrw
TSysResource (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.24
sysResEgrSapEgrClassIpv4sysResEgrSapEgrClassIpv4 sets the resource to be used for ipv4 match from the allocated sysResEgrSapEgrClassrw
TSysResource (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.25
sysResEgrSapEgrClassIpv4Ipv6sysResEgrSapEgrClassIpv4Ipv4Ipv6 sets the resource to be used for ipv4, ipv6 match from the allocated sysResEgrSapEgrClassrw
TSysResource (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.26
sysResIngTcamSapAggMetersysResIngTcamSapAggMeter sets the resource to be used for sap-aggregate-metersrw
TSysResource (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.27
sysResIngTcamSapAggMeterOperValThis object shows the operational value of sysResIngTcamSapAggMeterro
TSysResource (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.28
sysResQosSapIngQModeThis object allows the user to switch between the current mode and 22Gig mode.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.29
sysResQosSapIngQOperModeThis object returns the current operational value of sysResQosSapIngQModero
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.30
sysResRouterEcmpMaxRoutesDstSpecifies the number of routes to be reserved for use by ECMP.rw
Integer32
.1.3.6.1.4.1.6527.6.2.2.2.5.17.31
sysDhcpSnoopingSdpEnableEnable/disable dhcp snooping on SDPsrw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.32
sysDhcpSnoopingEnableEnable/disable dhcp snooping on the system. Currently for STU only.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.33
sysResRouterEcmpMaxRoutesDstOperValSpecifies the operational value of number of routes to be reserved for use by ECMP.roobsolete
Integer32
.1.3.6.1.4.1.6527.6.2.2.2.5.17.34
sysResIpMacMatchEnableResource allocation for ip mac match enablerw
INTEGER (-1 | 0..10)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.35
sysG8032FastFloodsysG8032FastFlood sets max-slices of 1 to 5rw
INTEGER
.1.3.6.1.4.1.6527.6.2.2.2.5.17.40
sysResIngTcamEthCfmDownMepsysResIngTcamEthCfmDownMep sets the resource to be used for Down MEP from the allocated sysResIngTcamEthCfmrw
TSysResource (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.51
sysResQosMbsPoolThis object allows the user to set buffer allocation at node or port level. 'node' means no change in the buffer allocation and works without any decommission ports. 'port' means buffers will be divided and shared across ports. In absence of decommission, buffers will be equally divided. If decommission entries are present, the division will happen as per decommission logic. Refer to tResDecommTablerw
Enumeration
.1.3.6.1.4.1.6527.6.2.2.2.5.17.53
sysResIngTcamEthCfmUpMepPrimaryVlansysResIngTcamEthCfmUpMepPrimaryVlan sets max-slices of 0 to 8rw
INTEGER
.1.3.6.1.4.1.6527.6.2.2.2.5.17.54
sysResIngTcamEthCfmDownMepPrimaryVlansysResIngTcamEthCfmDownMepPrimaryVlan sets max-slices of 0 to 8rw
INTEGER
.1.3.6.1.4.1.6527.6.2.2.2.5.17.55
sysResRouterMaxIPSubnetsSpecifies the number of subnets to be reserved for IP.rw
Integer32
.1.3.6.1.4.1.6527.6.2.2.2.5.17.56
sysQosPortSchedModeEnableEnable disable qos port scheduler moderw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.57
sysResMaxIPv6RoutesOperValSpecifies the number of routes to be reserved for use by IPv6. If the value is -1, then there is no limit.ro
Integer32 (-1..16000)
.1.3.6.1.4.1.6527.6.2.2.2.5.17.58
sysSASObjs
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.2.5.18
tmnxSysConsoleAlarmInputEnable/Disable Console Alarm Inputrw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.5.18.2
sysSASVwmObjs
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.2.5.19
tmnxVwmShelfTableThe tmnxVwmShelfTable contains an entry for each VWM shelf in the device
SEQUENCE OF TmnxVwmShelfEntry
.1.3.6.1.4.1.6527.6.2.2.2.5.19.1
tmnxVwmShelfEntryEach row entry contains information about a VWM shelf Entries in this table can be created and deleted via SNMP SET operations to tmnxVwmShelfRowStatus.
TmnxVwmShelfEntry
.1.3.6.1.4.1.6527.6.2.2.2.5.19.1.1
tmnxVwmShelfIdShelf ID of the VWM Shelfro
INTEGER
.1.3.6.1.4.1.6527.6.2.2.2.5.19.1.1.1
tmnxVwmShelfRowStatustmnxVwmShelfRowStatus controls the creation and deletion of rows in the table. To create a row in this table, set the row status to createAndGo(4)'.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.5.19.1.1.2
tmnxVwmShelfAdminStateThe value of tmnxVwmShelfAdminState specifies the administrative state of the VWM shelf.rw
TmnxAdminState (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.19.1.1.3
tmnxVwmShelfOperStateThe value of tmnxVwmShelfOperState specifies the operational state of the VWM shelf.ro
TmnxAdminState (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.19.1.1.4
tmnxVwmShelfVwmTypeThe value of tmnxVwmShelfVwmType specifies the vwm shelf type.rw
Enumeration
.1.3.6.1.4.1.6527.6.2.2.2.5.19.1.1.5
tmnxVwmShelfEquippedTypeThe value of tmnxVwmshelfTypeConnected specifies the vwm shelf type.equipped to the system.ro
Enumeration
.1.3.6.1.4.1.6527.6.2.2.2.5.19.1.1.6
tmnxVwmshelfTypeConnectedThe value of tmnxVwmshelfTypeConnected specifies the vwm shelf optical type.connected to the system.ro
Enumeration
.1.3.6.1.4.1.6527.6.2.2.2.5.19.1.1.7
tmnxVwmShelfCardTableThe tmnxVwmShelfCardTable contains an entry for each VWM shelf slot in the device
SEQUENCE OF TmnxVwmShelfCardEntry
.1.3.6.1.4.1.6527.6.2.2.2.5.19.2
tmnxVwmShelfCardEntryEach row entry contains information about a VWM shelf slot Entries in this table can be created and deleted via SNMP SET operations to tmnxVwmShelfRowStatus.
TmnxVwmShelfCardEntry
.1.3.6.1.4.1.6527.6.2.2.2.5.19.2.1
tmnxVwmShelfCardIdSlot ID of the VWM Shelf slotro
INTEGER
.1.3.6.1.4.1.6527.6.2.2.2.5.19.2.1.1
tmnxVwmShelfCardTypetmnxVwmShelfCardType is the vwm slot type that is being configured by userrw
TmnxVwmCardType (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.19.2.1.2
tmnxVwmShelfCardEqTypetmnxVwmShelfCardEqType is the vwm slot type that is being provisionedro
TmnxVwmCardType (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.19.2.1.3
tmnxVwmShelfCardAdminStateThe value of tmnxVwmShelfCardAdminState specifies the administrative state of the VWM shelf slot.rw
TmnxAdminState (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.19.2.1.4
tmnxVwmShelfCardOperStateThe value of tmnxVwmShelfCardOperState specifies the operational state of the VWM shelf slot.ro
TmnxAdminState (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.19.2.1.5
sysQosObjs
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.2.5.20
sysQosWredSlopesWhen tcp-non-tcp is set, 3 WRED slopes are used per queue. When high-low is set, 2 slopes are used per queue for both tcp and non-tcp trafficrw
Enumeration
.1.3.6.1.4.1.6527.6.2.2.2.5.20.1
sysClockInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.2.5.21
tmnxPtpTimeUsePtpIf this object is configured with 'system', ptp derived time (in UTC timescale) is used for all the system applications that need time, including the timestamps needed for OAM tools. If configured with 'oam', the system will use the PTP derived time (in UTC timescale) for only the timestamps needed by OAM. By default NTP derived time is used for all system applications. If NTP is not configured, then the system RTC is used for obtaining timestmaps in UTC timescale for all system applicationsrw
TmnxPtpTime
.1.3.6.1.4.1.6527.6.2.2.2.5.21.1
sysResProfPlcyObjs
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.2.5.22
tResPlcyTableThe tResPlcyTable has an entry for each user configured system resource policy.
SEQUENCE OF TResPlcyEntry
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1
tResPlcyEntryAn entry in this table would be created for every resource policy creation
TResPlcyEntry
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1
tResPlcyIdsystem resource policy id
INTEGER
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.1
tResPlcyRowStatusRowStatus of this policy entryrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.2
tResPlcyIngTcamSapAggMeterIngress tcam sap aggregate meter resourcerw
INTEGER
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.3
tResPlcyIngTcamQosSapIngIngress tcam sap sap ingress resourcerw
INTEGER
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.4
tResPlcyIngTcamQosSapIngIpv4Ingress tcam sap ingress ipv4 resourcerw
INTEGER (-1..5)
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.5
tResPlcyIngTcamQosSapIngIpv4Ipv6Ingress tcam sap ingress ipv4, ipv6 resourcerw
INTEGER (-1..5)
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.6
tResPlcyIngTcamQosSapIngMacIngress tcam sap ingress mac resourcerw
INTEGER (-1..5)
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.7
tResPlcyIngTcamAclSapIngIngress tcam acl sap ingress resourcerw
INTEGER
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.8
tResPlcyIngTcamAclSapIngIpv4Ingress tcam acl sap ingress ipv4 resourcerw
INTEGER (-1..5)
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.9
tResPlcyIngTcamAclSapIng64Ipv6Ingress tcam acl sap ingress 64 bit ipv6 match resourcerw
INTEGER (-1..5)
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.10
tResPlcyIngTcamAclSapIng128Ipv4Ipv6Ingress tcam acl sap ingress 128 bit ipv6 resourcerw
INTEGER (-1..5)
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.11
tResPlcyIngTcamAclSapIngMacIngress tcam acl sap ingress mac resourcerw
INTEGER (-1..5)
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.12
tResPlcyEgrTcamAclSapEgrEgress tcam acl sap sap egress 1resourcerw
INTEGER (0 | 2)
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.13
tResPlcyEgrTcamAclSapEgrMacIpv4Egress tcam acl sap egress mac ipv4 resourcerw
INTEGER (0 | 2)
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.14
tResPlcyEgrTcamAclSapEgr128Ipv6Egress tcam acl sap egress 128bit ipv6 resourcerw
INTEGER (0 | 2)
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.15
tResPlcyEgrTcamAclSapEgr64MacIpv6Egress tcam acl sap egress mac resourcerw
INTEGER (0 | 2)
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.16
tResPlcyEgrTcamAclSapEgrMacEgress tcam acl sap egress mac resourcerw
INTEGER (0 | 2)
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.17
tResPlcyDescriptionuser-provided description of the policy.rw
TItemDescription (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.18
tResPlcyLastChangedtimestamp of last change to this row.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.19
tResPlcyIngTcamEthCfmIngress tcam eth cfm resourcerw
INTEGER
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.20
tResPlcyIngTcamEthCfmUpMepIngress tcam eth cfm up-mep resourcerw
INTEGER
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.21
tResPlcyG8032CtrlSapStartVlanG8032 control sap tag start vlanrw
Unsigned32(0 | 3000 .. 3512)
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.22
tResPlcyG8032CtrlSapEndVlanG8032 control sap tag End vlanrw
Unsigned32(0 | 3000 .. 3512)
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.23
tResPlcyResIpMacMatchEnableResource allocation for ip mac match enablerw
INTEGER (-1 | 0..10)
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.24
tResPlcyIngTcamEthCfmDownMepIngress tcam eth cfm down-mep resourcerw
INTEGER
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.25
tResPlcyIngTcamEthCfmUpMepEnableEnable/Disable Up Meprw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.27
tResPlcyIngTcamEthCfmDownMepEnableEnable/Disable Down Meprw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.28
sysResProfDecommObjs
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.2.5.23
tResDecommTableThe tResDecommTable has an entry for each user configured system decommissioned resource port.
SEQUENCE OF TResDecommEntry
.1.3.6.1.4.1.6527.6.2.2.2.5.23.1
tResDecommEntryAn entry in this table would be created for every decommissioned entry created
TResDecommEntry
.1.3.6.1.4.1.6527.6.2.2.2.5.23.1.1
tResDecommIdsystem resource decommision id
INTEGER
.1.3.6.1.4.1.6527.6.2.2.2.5.23.1.1.1
tResDecommRowStatusRowStatus of this policy entryrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.5.23.1.1.2
tResDecommFromPortMaptResDecommFromPortMap is the bit map of ports that are decommissionedrw
Unsigned32
.1.3.6.1.4.1.6527.6.2.2.2.5.23.1.1.3
tResDecommToPortMaptResDecommToPortMap is the bit map of ports that are are allocated the resources freed up by the ports in tResDecommFromPortMaprw
Unsigned32
.1.3.6.1.4.1.6527.6.2.2.2.5.23.1.1.4
tResDecommOperTableThe tResDecommOperTable has an entry for each user configured system decommissioned resource port. This table is updated only at boot time, the entries in this table will match the entries available in tResDecommTable until administrative decommission entries are modified by the user
SEQUENCE OF TResDecommOperEntry
.1.3.6.1.4.1.6527.6.2.2.2.5.23.2
tResDecommOperEntryAn entry in this table would be created for every decommissioned entry created
TResDecommOperEntry
.1.3.6.1.4.1.6527.6.2.2.2.5.23.2.1
tResDecommOperIdsystem resource decommision id
INTEGER
.1.3.6.1.4.1.6527.6.2.2.2.5.23.2.1.1
tResDecommOperFromPortMaptResDecommOperFromPortMap is the bit map of ports that are decommissionedro
Unsigned32
.1.3.6.1.4.1.6527.6.2.2.2.5.23.2.1.2
tResDecommOperToPortMaptResDecommOperToPortMap is the bit map of ports that are are allocated the resources freed up by the ports in tResDecommFromPortMapro
Unsigned32
.1.3.6.1.4.1.6527.6.2.2.2.5.23.2.1.3
sysOperGrpObjs
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.2.5.24
sysOperGrpTblLastChangedThe value of sysOperGrpTblLastChanged indicates the sysUpTime at the time of the last modification of sysOperGrpTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.5.24.1
sysOperGrpTableA table that contains Operational-Group information.
SEQUENCE OF SysOperGrpEntry
.1.3.6.1.4.1.6527.6.2.2.2.5.24.2
sysOperGrpEntryEach row specifies information about a specific Operational-Group.
SysOperGrpEntry
.1.3.6.1.4.1.6527.6.2.2.2.5.24.2.1
sysOperGrpNameThe value of the object sysOperGrpName specifies the Operational-Group identifier.
TNamedItem (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.24.2.1.1
sysOperGrpRowStatusThis value of the object sysOperGrpRowStatus specifies the status of this row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.5.24.2.1.2
sysOperGrpLastChangeThe value of sysOperGrpLastChange indicates the timestamp of last change to this row in sysOperGrpTable.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.5.24.2.1.3
sysOperGrpOperStatusThe value of sysOperGrpOperStatus indicates the operational state of this group.ro
ServiceOperStatus (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.5.24.2.1.4
sysOperGrpHoldDownTimeThe value of sysOperGrpHoldDownTime specifies number of seconds to wait before notifying clients monitoring this group when its operational status transitions from up to down.rw
TmnxOperGrpHoldDownTime UNITS "seconds"
.1.3.6.1.4.1.6527.6.2.2.2.5.24.2.1.5
sysOperGrpCreationOriginThe value of sysOperGrpCreationOrigin indicates the protocol or mechanism which created this group.ro
TmnxSysOperGrpCreationOrigin
.1.3.6.1.4.1.6527.6.2.2.2.5.24.2.1.6
sysOperGrpHoldUpTimeThe value of sysOperGrpHoldUpTime specifies number of seconds to wait before notifying clients monitoring this group when its operational status transitions from down to up.rw
TmnxOperGrpHoldUpTime UNITS "seconds"
.1.3.6.1.4.1.6527.6.2.2.2.5.24.2.1.7
sysOperGrpHoldUpTimeRemainThe value of sysOperGrpHoldUpTimeRemain indicates the number of seconds remaining in the sysOperGrpHoldUpTime.ro
TmnxOperGrpHoldUpTime UNITS "seconds"
.1.3.6.1.4.1.6527.6.2.2.2.5.24.2.1.8
sysOperGrpHoldDownTimeRemainThe value of sysOperGrpHoldDownTimeRemain indicates the number of seconds remaining in the sysOperGrpHoldDownTime.ro
TmnxOperGrpHoldDownTime UNITS "seconds"
.1.3.6.1.4.1.6527.6.2.2.2.5.24.2.1.9
sysOperGrpNumMembersThe value of sysOperGrpNumMembers indicates the number of members as part of this operational-group.ro
Gauge32
.1.3.6.1.4.1.6527.6.2.2.2.5.24.2.1.10
sysOperGrpNumMonitoringThe value of sysOperGrpNumMonitoring indicates the number of objects monitoring this operational-group.ro
Gauge32
.1.3.6.1.4.1.6527.6.2.2.2.5.24.2.1.11
tmnxSASChassisObjs
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.2.6
tmnxSASChassisNotificationObjs
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.2.6.1
tmnxSASChassisNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.2.6.2
tmnxEnvTempTooLowGenerated when the temperature sensor reading on an equipment object is lesser than its configured threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.6.2.2.2.6.2.1
tmnxRootDirFullGenerated when the dosfs root directory is full, number of files in root directory has reached the threshold limit.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.6.2.2.2.6.2.2
tmnxEqPowerInputFailureGenerated when one of the chassis's power source supplies fails.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.6.2.2.2.6.2.3
tmnxEqPowerOutputFailureGenerated when one of the chassis's power output fails.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.6.2.2.2.6.2.4
tmnxEqMDACfgMissingGenerated when a supported MDA is inserted into a slot, but the current configuration is not sufficient for the MDA to operate.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.6.2.2.2.6.2.5
tmnxVwmShelfInsertedGenerated when the vwm-shelf is inserted
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.6.2.2.2.6.2.6
tmnxVwmShelfIdMismatchtmnxVwmShelfIdMismatch is when the vwm-shelf configured by the user does not match the rotary switch setting
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.6.2.2.2.6.2.7
tmnxVwmShelfRemovedGenerated when the vwm-shelf is removed
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.6.2.2.2.6.2.8
tmnxUsbUnknownDevGenerated when unsupported USB device is inserted into a 7210 device
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.6.2.2.2.6.2.9
tmnxAlarmInputVoltageFailureGenerated when the internal alam input voltage fails
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.6.2.2.2.6.2.10
tmnxVwmShelfCardInsertedGenerated when a VWM shelf line card is inserted.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.6.2.2.2.6.2.11
tmnxVwmShelfCardRemovedGenerated when a VWM shelf line card is removed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.6.2.2.2.6.2.12
tmnxVwmShelfCardIdMismatchGenerated when there is a VWM shelf line card mismatch with configured id.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.6.2.2.2.6.2.13
tmnxVwmShelfPSInputFailureGenerated when there is a input power supply failure on VWM shelf
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.6.2.2.2.6.2.14
tmnxVwmShelfPSOutputFailureGenerated when there is a output power supply failure on VWM shelf
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.6.2.2.2.6.2.15
tmnxVwmShelfInputLossGenerated when there is a loss on VWM shelf input
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.6.2.2.2.6.2.16
tmnxVwmShelfOutputLossGenerated when there is a loss on VWM shelf output
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.6.2.2.2.6.2.17
tmnxVwmShelfCardCfgErrorGenerated when the vwm shelf inserted does not match with configured shelf id, card
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.6.2.2.2.6.2.18
sysOperGrpOperStatusChanged[CAUSE] The svcOperGrpOperStatusChanged notification is generated when there is a change in the value of svcOperGrpOperStatus. [EFFECT] Status of the one or more of the members of the operational group has changed. [RECOVERY] Operational status of the members of the operational-group will need to be investigated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.6.2.2.2.6.2.25
tmnxChassisExtnTableThe chassis table has an entry for each chassis in the system. This table extends the tmnxChassisTable for the SAS platform
SEQUENCE OF TmnxChassisExtnEntry
.1.3.6.1.4.1.6527.6.2.2.2.6.3
tmnxChassisExtnEntryAn entry in this table would be created for every entry in the tmnxChassisEntry
TmnxChassisExtnEntry
.1.3.6.1.4.1.6527.6.2.2.2.6.3.1
tmnxChassisUpdateGoldenBootstrapImageSetting this action variable to 'doAction' causes the current golden bootstrap image to be updated with the image at the location specified by tmnxChassisGoldenBootstrapImageSrc. If no location is specified by tmnxChassisGoldenBootstrapImageSrc, cf1:/boot.tim will be saved as the golden bootstrap image.rw
TmnxActionType (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.6.3.1.1
tmnxChassisGoldenBootstrapImageSrcThe value of tmnxChassisGoldenBootstrapImageSrc specifies the source filepath or file-URL which will be saved as the golden bootstrap image when tmnxChassisUpdateGoldenBootstrapImage is set to 'doAction'. If 'tmnxChassisGoldenBootstrapImage' is set to the empty string, ''H, cf1:/boot.tim will be saved as the golden bootstrap image.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.6.3.1.2
tmnxChassisValidateGoldenBootstrapImageSetting this action variable to 'doAction' causes the current golden bootstrap image to be validated and upon completion tmnxChassisGoldenBootstrapImageVersion will be populated with its version. If the validation fails tmnxChassisGoldenBootstrapImageVersion will be populated apropriately.rw
TmnxActionType (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.6.3.1.3
tmnxChassisGoldenBootstrapImageVersionThis object is populated with the version of the golden bootstrap image when validation is completed. If the validation fails, one of the following values is set: 'Invalid Golden Bootstrap Image' - Indicates the image is invalid.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.6.3.1.4
tmnxChassisRebootAutoInitSetting this action variable to 'doAction', will reset the bof and reboot the systemrw
TmnxActionType (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.6.3.1.5
tmnxChassisLowTempStateThe current Low Temperature state of this chassis. stateOk Indicates chassis is above the low temperature threshold. stateLowTemp Indicates chassis is below the low temperature threshold.ro
Enumeration
.1.3.6.1.4.1.6527.6.2.2.2.6.3.1.6
tmnxChassisSystemLEDStateThe current state of the System LED in this chassis.ro
TmnxLEDState
.1.3.6.1.4.1.6527.6.2.2.2.6.3.1.7
tmnxHwExtnTableThe tmnxHwTable has an entry for each managed hardware component. This table extends the TmnxHwEntry for the SAS platform
SEQUENCE OF TmnxHwExtnEntry
.1.3.6.1.4.1.6527.6.2.2.2.6.4
tmnxHwExtnEntryAn entry in this table would be created for every entry in the tmnxChassisEntry
TmnxHwExtnEntry
.1.3.6.1.4.1.6527.6.2.2.2.6.4.1
tmnxHwLowTempThresholdThe low temperature threshold for this hardware component in degrees celsius. When the value of tmnxHwTemperature lowers below tmnxHwLowTempThreshold, a 'temperature too low' event will be generated.ro
Integer32 UNITS "degrees celsius"
.1.3.6.1.4.1.6527.6.2.2.2.6.4.1.1
tmnxFabricPolicyTableThis table provides the context to configure the fabric policy in use by different applications. Currently, PBB is the only application using it and only one default object is supported
SEQUENCE OF TmnxFabricPolicyEntry
.1.3.6.1.4.1.6527.6.2.2.2.6.5
tmnxFabricPolicyEntry
TmnxFabricPolicyEntry
.1.3.6.1.4.1.6527.6.2.2.2.6.5.1
tmnxFabricPolicyIndexthe policy ID is the index to this table.
TPolicyID
.1.3.6.1.4.1.6527.6.2.2.2.6.5.1.1
tmnxFabricPolicyRowStatusRow Status for the policy.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.6.5.1.2
tmnxFabricPolicyCIRThe CIR specified by the user.rw
TCIRRate UNITS "kbps"
.1.3.6.1.4.1.6527.6.2.2.2.6.5.1.3
tmnxFabricPolicyPIRThe PIR specified by the user.rw
TPIRRate UNITS "kbps"
.1.3.6.1.4.1.6527.6.2.2.2.6.5.1.4
tmnxFabricPolicyCBSThe amount of reserved buffer space (in kilo bytes).rw
TBurstSize (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.6.5.1.5
tmnxFabricPolicyMBSThe maximum amount of buffer space (in kilo bytes) allowedrw
TBurstSize (TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.6.2.2.2.6.5.1.6
tmnxFabricPolicyMpointFabricPortrw
Integer32
.1.3.6.1.4.1.6527.6.2.2.2.6.5.1.7
tmnxChassisPowerSupplyExtnTableThis table extends the Power Supply Information defined in tmnxChassisPowerSupplyTable
SEQUENCE OF TmnxChassisPowerSupplyExtnEntry
.1.3.6.1.4.1.6527.6.2.2.2.6.6
tmnxChassisPowerSupplyExtnEntryContains information regarding a power supply tray.
TmnxChassisPowerSupplyExtnEntry
.1.3.6.1.4.1.6527.6.2.2.2.6.6.1
tmnxChassisPowerSupplyAssignedDCTypetmnxChassisPowerSupplyAssignedDCType when set to `m48-dc`, the power supply is -48V DC, when set to P24-dc it is +24V DC. tmnxChassisPowerSupplyAssignedDCType is set to m48-dc or p24-dc if tmnxChassisPowerSupplyAssignedType is of type `dc`, If tmnxChassisPowerSupplyAssignedType is not `dc` tmnxChassisPowerSupplyAssignedDCType will be set to not-applicable.ro
Enumeration
.1.3.6.1.4.1.6527.6.2.2.2.6.6.1.1
tmnxChassisFanExtnTableThis table extends the system fan information
SEQUENCE OF TmnxChassisFanExtnEntry
.1.3.6.1.4.1.6527.6.2.2.2.6.7
tmnxChassisFanExtnEntryContains information regarding Fan tray.
TmnxChassisFanExtnEntry
.1.3.6.1.4.1.6527.6.2.2.2.6.7.1
tmnxChassisFanCfgModetmnxChassisFanCfgMode is the configuration object used to determine how the fan in controlled. It can be either user controlled (on|off) or in 'auto' mode where the operation will be based on threshold values.rw
TmnxFanCfgMode
.1.3.6.1.4.1.6527.6.2.2.2.6.7.1.1
tmnxChassisFanOperModetmnxChassisFanOperMode is a read only object which will determine the current mode of operation.ro
Enumeration
.1.3.6.1.4.1.6527.6.2.2.2.6.7.1.2
tmnxSASCardObjs
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.2.6.8
tmnxCardExtnTableThe tmnxCardExtnTable has an entry for each one of the entry in tmnxCardTable
SEQUENCE OF TmnxCardExtnEntry
.1.3.6.1.4.1.6527.6.2.2.2.6.8.1
tmnxCardExtnEntryThe tmnxCardExtnEntry extends tmnxCardEntry capabilities
TmnxCardExtnEntry
.1.3.6.1.4.1.6527.6.2.2.2.6.8.1.1
tmnxCardSysResPlcyIdsystem resource policy id attached to this cardrw
INTEGER
.1.3.6.1.4.1.6527.6.2.2.2.6.8.1.1.1
tmnxCpmCardExtnTableThe tmnxCpmCardExtnTable has an entry for each CPM card or module in each chassis in the TMNX system.
SEQUENCE OF TmnxCpmCardExtnEntry
.1.3.6.1.4.1.6527.6.2.2.2.6.8.2
tmnxCpmCardExtnEntryEach row entry represents a CPM card or module in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. When a tmnxChassisEntry is created, a tmnxCpmCardExtnEntry is created for each CPM card or module in that chassis. Before a tmnxChassisEntry can be deleted, each tmnxCpmCardEntry for that chassis must be in the proper state for removal.
TmnxCpmCardExtnEntry
.1.3.6.1.4.1.6527.6.2.2.2.6.8.2.1
tmnxCpmCardBootImageSourcetmnxCpmCardBootImageSource indicates the compact flash slot where the Boot image file was found when the system last rebooted. For example, if the BOF file was found on compact flash slot 1, the value of this variable will be 'cf1:'ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.6.8.2.1.1
aluExtTmnxChassisTableThe chassis table has an entry for each chassis in the system.
SEQUENCE OF AluExtTmnxChassisEntry
.1.3.6.1.4.1.6527.6.2.2.2.6.9
aluExtTmnxChassisEntryEach row entry represents a chassis in the system. The agent creates the row for the first chassis in the system, with tmnxChassisIndex = 1, which is auto-discovered by the active CPM card. Additional chassis entries can be created and deleted via SNMP SET operations. Creation requires a SET request containing at least tmnxChassisAdminMode and tmnxChassisRowStatus. Note that the first Alcatel 7x50 series product release does not support multiple chassis, therefore there will not be more than one row entry in this table; attempts to create additional rows in this table will be denied.
AluExtTmnxChassisEntry
.1.3.6.1.4.1.6527.6.2.2.2.6.9.1
aluExtPoePowerModealuExtPoePowerMode represents set of poe capabilities, the mode is general for all MDAs, portsrw
Enumeration
.1.3.6.1.4.1.6527.6.2.2.2.6.9.1.3
aluExtPoePowerSupplyStatusCurrent status of the PoE Power Supply.ro
Enumeration
.1.3.6.1.4.1.6527.6.2.2.2.6.9.1.4
aluExtPoeExternalPowerSupplyStatusCurrent status of the PoE External Power Supply connectionro
Enumeration
.1.3.6.1.4.1.6527.6.2.2.2.6.9.1.5
tCardResOperTableThe tCardResOperTable has an entry for each CPM card or module in each chassis in the TMNX system, this table provides the operations system resource values used on the card
SEQUENCE OF TCardResOperEntry
.1.3.6.1.4.1.6527.6.2.2.2.6.10
tCardResOperEntryEach row entry represents a CPM card or module in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. When a tmnxChassisEntry is created, a tCardResOperEntry is created for each CPM card or module in that chassis. Before a tmnxChassisEntry can be deleted, each tCardResOperEntry for that chassis must be in the proper state for removal.
TCardResOperEntry
.1.3.6.1.4.1.6527.6.2.2.2.6.10.1
tCardResOperIngTcamSapAggMeterIngress tcam sap aggregate meter resourcero
INTEGER
.1.3.6.1.4.1.6527.6.2.2.2.6.10.1.1
tCardResOperIngTcamQosSapIngIngress tcam sap sap ingress resourcero
INTEGER
.1.3.6.1.4.1.6527.6.2.2.2.6.10.1.2
tCardResOperIngTcamQosSapIngIpv4Ingress tcam sap ingress ipv4 resourcero
INTEGER (-1..5)
.1.3.6.1.4.1.6527.6.2.2.2.6.10.1.3
tCardResOperIngTcamQosSapIngIpv4Ipv6Ingress tcam sap ingress ipv4, ipv6 resourcero
INTEGER
.1.3.6.1.4.1.6527.6.2.2.2.6.10.1.4
tCardResOperIngTcamQosSapIngMacIngress tcam sap ingress mac resourcero
INTEGER (-1..5)
.1.3.6.1.4.1.6527.6.2.2.2.6.10.1.5
tCardResOperIngTcamAclSapIngIngress tcam acl sap ingress resourcero
INTEGER
.1.3.6.1.4.1.6527.6.2.2.2.6.10.1.6
tCardResOperIngTcamAclSapIngIpv4Ingress tcam acl sap ingress ipv4 resourcero
INTEGER (-1..5)
.1.3.6.1.4.1.6527.6.2.2.2.6.10.1.7
tCardResOperIngTcamAclSapIng64Ipv6Ingress tcam acl sap ingress 64 bit ipv6 match resourcero
INTEGER (-1..5)
.1.3.6.1.4.1.6527.6.2.2.2.6.10.1.8
tCardResOperIngTcamAclSapIng128Ipv4Ipv6Ingress tcam acl sap ingress 128 bit ipv6 resourcero
INTEGER (-1..5)
.1.3.6.1.4.1.6527.6.2.2.2.6.10.1.9
tCardResOperIngTcamAclSapIngMacIngress tcam acl sap ingress mac resourcero
INTEGER (-1..5)
.1.3.6.1.4.1.6527.6.2.2.2.6.10.1.10
tCardResOperEgrTcamAclSapEgrEgress tcam acl sap sap egress 1resourcero
INTEGER (0 | 2)
.1.3.6.1.4.1.6527.6.2.2.2.6.10.1.11
tCardResOperEgrTcamAclSapEgrMacIpv4Egress tcam acl sap egress mac ipv4 resourcero
INTEGER (0 | 2)
.1.3.6.1.4.1.6527.6.2.2.2.6.10.1.12
tCardResOperEgrTcamAclSapEgr128Ipv6Egress tcam acl sap egress 128bit ipv6 resourcero
INTEGER (0 | 2)
.1.3.6.1.4.1.6527.6.2.2.2.6.10.1.13
tCardResOperEgrTcamAclSapEgr64MacIpv6Egress tcam acl sap egress mac resourcero
INTEGER (0 | 2)
.1.3.6.1.4.1.6527.6.2.2.2.6.10.1.14
tCardResOperEgrTcamAclSapEgrMacEgress tcam acl sap egress mac resourcero
INTEGER (0 | 2)
.1.3.6.1.4.1.6527.6.2.2.2.6.10.1.15
tCardResOperIngTcamEthCfmIngress tcam eth cfm resourcero
INTEGER
.1.3.6.1.4.1.6527.6.2.2.2.6.10.1.18
tCardResOperIngTcamEthCfmUpMepIngress tcam eth cfm up-mep resourcero
INTEGER
.1.3.6.1.4.1.6527.6.2.2.2.6.10.1.19
tCardResOperG8032CtrlSapStartVlanG8032 control sap tag start vlanro
Unsigned32(0 .. 4094)
.1.3.6.1.4.1.6527.6.2.2.2.6.10.1.20
tCardResOperG8032CtrlSapEndVlanG8032 control sap tag End vlanro
Unsigned32(0 .. 4094)
.1.3.6.1.4.1.6527.6.2.2.2.6.10.1.21
tCardResOperResIpMacMatchEnableResource allocation for ip mac match enablero
INTEGER (-1 | 0..10)
.1.3.6.1.4.1.6527.6.2.2.2.6.10.1.22
tCardResOperIngTcamEthCfmDownMepIngress tcam eth cfm down-mep resourcero
INTEGER
.1.3.6.1.4.1.6527.6.2.2.2.6.10.1.23
tCardResOperIngTcamIpMulticasttCardResOperIngTcamIpMulticast sets the resource to be used for ip-multicast.ro
INTEGER
.1.3.6.1.4.1.6527.6.2.2.2.6.10.1.24
tmnxSASSecurityObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.2.15
tmnxSASSecurityNotificationObjs
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.2.15.5
tmnxLoginUserNameThe value of tmnxUserName specifies the name for a system user. This name must be unique amongst the table entries. tmnxUserName will be sent in the notifications when the user crosses the threshold login attempts configured in tmnxPasswordAttemptsCountro
TNamedItem
.1.3.6.1.4.1.6527.6.2.2.2.15.5.1
tmnxLoginUserSrcIPAddressThe value of tmnxLoginUserSrcIPAddress specifies the source address of the client station from where the user has tried to loginro
InetAddress
.1.3.6.1.4.1.6527.6.2.2.2.15.5.2
tmnxLoginMaxAttemptsThe value of tmnxLoginMaxAttempts specifies the number of times user could attempt to login before raising a max attempt trapro
INTEGER
.1.3.6.1.4.1.6527.6.2.2.2.15.5.3
tmnxChassisNotifyMDACfgFailReasonUsed by tmnxEqMDACfgMissing, the value of tmnxChassisNotifyMDACfgFailReason contains the reason for MDA config failure.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6527.6.2.2.2.15.5.4
tmnxSASSysMIBNotifyPrefix
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.3.1
tmnxSASSysNotifications
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.3.1.3
tmnxDyingGasptmnxDyingGasp trap is generated when the system goes down due to power failure. System would make best effort to send out this trap with the power remaining in Dying Gasp capacitor
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.6.2.2.3.1.3.1
tmnxSASSecurityNotifyPrefix
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.3.2
tmnxSASSecurityNotifications
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.6.2.2.3.2.0
tmnxUserLoginMaxAttemptsThe tmnxUserLoginMaxAttempts is generated when a user failed to authenticate in more than the permitted number of login retries.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.6.2.2.3.2.0.1
tmnxSSHUserLoginMaxAttemptsThe tmnxSSHUserLoginMaxAttempts is generated when a user failed to authenticate in more than the permitted number of login retries through SSH.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.6.2.2.3.2.0.3
TIMETRA-SAS-SYSTEM-MIB - SNMP MIB Reference | MIBs Explorer