TIMETRA-OSPF-NG-MIB
AI MIB Summary
The TIMETRA-OSPF-NG-MIB enables SNMP-based provisioning and monitoring of Open Shortest Path First (OSPF) protocol instances, neighbor adjacencies, and routing table states on Alcatel-Lucent Service Router Operating System (SROS) devices. This proprietary module facilitates the retrieval of OSPF-specific counters, interface metrics, and topology data required for network operations and troubleshooting on Alcatel-Lucent infrastructure.
This document is the SNMP MIB module to manage and provision OSPF protocol for the Alcatel-Lucent SROS device.
Copyright 2003-2012 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions.
Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies.
This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Main OID:
timetraOspfNgMIBModule.1.3.6.1.4.1.6527.1.1.3.36
817
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
817 total| Object Name |
|---|
timetraOspfNgMIBModuleThis document is the SNMP MIB module to manage and provision
OSPF protocol for the Alcatel-Lucent SROS device.
Copyright 2003-2012 Alcatel-Lucent. All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel-Lucent's
proprietary intellectual property. Alcatel-Lucent retains
all title and ownership in the Specification, including any
revisions.
Alcatel-Lucent grants all interested parties a non-exclusive
license to use and distribute an unmodified copy of this
Specification in connection with management of Alcatel-Lucent
products, and without fee, provided this copyright notice and
license appear on all copies.
This Specification is supplied 'as is', and Alcatel-Lucent
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.6527.1.1.3.36 |
tmnxOspfConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.36 |
tmnxOspfCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.36.1 |
tmnxOspfGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.36.2 |
tmnxOspfObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.36 |
tmnxOspfScalars OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.36.1 |
tmnxOspfGeneralEntriesThe value of tmnxOspfGeneralEntries indicates the number of row
entries in the tmnxOspfGeneralTable. This is the number of
OSPF instances currently configured.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.1.1 |
tmnxOspfGeneralTableThe tmnxOspfGeneralTable contains information describing the
configured parameters and cumulative statistics of an OSPF
instance's attached areas. SEQUENCE OF TmnxOspfGeneralEntry .1.3.6.1.4.1.6527.3.1.2.36.2 |
tmnxOspfGeneralEntryThe tmnxOspfGeneralEntry contains information describing the
configured parameters and cumulative statistics of one of an
OSPF instance's attached areas. An OSPF row entry is created
or deleted in this table by setting the tmnxOspfRowStatus object. TmnxOspfGeneralEntry .1.3.6.1.4.1.6527.3.1.2.36.2.1 |
tmnxOspfVersionThe value of tmnxOspfVersion specifies the version number of OSPF
supported by this OSPF instance. The version number of OSPF for
IPv6 is 3. Enumeration .1.3.6.1.4.1.6527.3.1.2.36.2.1.1 |
tmnxOspfInstanceThe value of tmnxOspfInstance is a unique integer that
identifies a specific instance of a version of the
OSPF protocol running in the router instance specified
by the vRtrID index. TmnxOspfInstance (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.2.1.2 |
tmnxOspfGeneralLastChangedThe value of tmnxOspfGeneralLastChanged indicates the sysUpTime
when a configurable object in this row was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.2.1.4 |
tmnxOspfRouterIdThe value of tmnxOspfRouterId specifies a 32-bit integer uniquely
identifying the router in the Autonomous System. By convention
to ensure uniqueness, this may default to the value of one of the
router's IPv4 host addresses, represented as a 32-bit unsigned
integer, if IPv4 is configured on the router.rw TmnxOspfRouterIdTc .1.3.6.1.4.1.6527.3.1.2.36.2.1.5 |
tmnxOspfAdminStateThe value of tmnxOspfAdminState specifies the desired
administrative status of this instance of OSPF in the router.
The value 'enabled' activates this instance of the OSPF protocol.
The value' disabled' stops it.rw Status (OSPF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.2.1.6 |
tmnxOspfASBdrRtrStatusThe value of tmnxOspfASBdrRtrStatus specifies whether this router
is configured as an Autonomous System border router.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.2.1.7 |
tmnxOspfRFC1583CompatibilityThe value of tmnxOspfRFC1583Compatibility indicates the
metrics used to choose among multiple AS-external-LSAs.
When tmnxOspfRFC1583Compatibility is set to 'true', only cost
will be used when choosing among multiple AS-external-LSAs
advertising the same destination. When tmnxOspfRFC1583Compatibility
is set to 'false', preference will be driven first by the
type of path using cost only to break ties.
This object is valid only when tmnxOspfVersion is 'version2'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.2.1.8 |
tmnxOspfExtLsdbLimitThe value of tmnxOspfExtLsdbLimit specifies the maximum
number of non-default AS-external-LSAs entries that can be
stored in the link-state database. If the value is -1, then
there is no limit.
When the number of non-default AS-external-LSAs in a router's
link-state database reaches tmnxOspfExtLsdbLimit, the
router enters Overflow state. The router never holds more than
tmnxOspfExtLsdbLimit non-default AS-external-LSAs in its
database. tmnxOspfExtLsdbLimit MUST be set identically in
all routers attached to the OSPF backbone and/or any regular
OSPF area. (i.e., OSPF stub areas and NSSAs are excluded).rw Integer32 (-1..'7FFFFFFF'h) .1.3.6.1.4.1.6527.3.1.2.36.2.1.9 |
tmnxOspfMulticastExtensionsThe value of tmnxOspfMulticastExtensions specifies a Bit Mask
indicating whether the router is forwarding IPv6 multicast
datagrams based on the algorithms defined in the Multicast
Extensions to OSPF.
When the intraAreaMulticast bit is set, it indicates that the
router can forward IPv6 multicast datagrams in the router's
directly attached areas (called intra-area multicast routing).
When the interAreaMulticast bit is set, it indicates that the
router can forward IPv6 multicast datagrams between OSPFv3
areas (called inter-area multicast routing).
When the interAsMulticast bit is set, it indicates that the
router can forward IPv6 multicast datagrams between Autonomous
Systems (called inter-AS multicast routing).
Only certain combinations of bit settings are allowed, namely:
- All bits cleared (no multicasting)
- intraAreaMulticast only,
- intraAreaMulticast and interAreaMulticast,
- intraAreaMulticast and interAsMulticast
- intraAreaMulticast, interAreaMulticast and interAsMulticast
By default, all bits are cleared.rw Bits .1.3.6.1.4.1.6527.3.1.2.36.2.1.10 |
tmnxOspfExitOverflowIntervalThe value of tmnxOspfExitOverflowInterval specifies the number of
seconds that, after entering Overflow State, a router will attempt
to leave Overflow State. This allows the router to again originate
non-default AS-external-LSAs. When set to 0, the router will not
leave Overflow state until restarted.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.2.1.11 |
tmnxOspfDemandExtensionsThe value of tmnxOspfDemandExtensions specifies the router's support
for demand routing.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.2.1.12 |
tmnxOspfReferenceBandwidthThe value of tmnxOspfReferenceBandwidth specifies default
metrics to any OSPF interface. The cost metric is calculated
by dividing the value of tmnxOspfReferenceBandwidth by the bandwidth
of the interface. The default value of 100,000,000 Kbps or
100 Gps provides a 10-Mbs link with a cost of 10000, a 100-Mbs
link with a cost of 1000, a 1-Gbs link with a cost of 100 and
10-Gbs link with a cost of 10. To override this default cost
on a particular interface, set tmnxOspfIfCfgMetric for that
interface.
The maximum value of 1,000,000,000 Kbps amounts to
one Terabit per second.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.2.1.13 |
tmnxOspfStrictLsaCheckingThe value of tmnxOspfStrictLsaChecking indicates if strict
LSA checking is enabled for graceful restart.
This object is persistent and when written the entity SHOULD
save the change to non-volatile storage.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.2.1.14 |
tmnxOspfRestartSupportThe value of tmnxOspfRestartSupport specifies the router's support
for OSPF graceful restart. Options include: no restart support,
only planned restarts or both planned and unplanned restarts.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.36.2.1.15 |
tmnxOspfRestartIntervalThe value of tmnxOspfRestartInterval specifies the configured
OSPF graceful restart timeout interval.rw TmnxOspfUpToRefreshIntervalTc UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.2.1.16 |
tmnxOspfPreferenceThe value of tmnxOspfPreference specifies the
route preference for OSPF internal routes.rw TmnxOspfPreference .1.3.6.1.4.1.6527.3.1.2.36.2.1.17 |
tmnxOspfExternalPreferenceThe value of tmnxOspfExternalPreference specifies the
route preference for OSPF external routes.rw TmnxOspfPreference .1.3.6.1.4.1.6527.3.1.2.36.2.1.18 |
tmnxOspfExportPolicy1The value of tmnxOspfExportPolicy1 specifies the name of
1st Export policy to be used to be used for determining which
routes are exported from the routing table to OSPF.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.2.1.19 |
tmnxOspfExportPolicy2The value of tmnxOspfExportPolicy2 specifies the name of 2nd
Export policy to be used to be used for determining which routes
are exported from the routing table to OSPF.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.2.1.20 |
tmnxOspfExportPolicy3The value of tmnxOspfExportPolicy3 specifies the name of 3rd
Export policy to be used to be used for determining which routes
are exported from the routing table to OSPF.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.2.1.21 |
tmnxOspfExportPolicy4The value of tmnxOspfExportPolicy4 specifies the name of 4rd
Export policy to be used to be used for determining which routes
are exported from the routing table to OSPF.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.2.1.22 |
tmnxOspfExportPolicy5The value of tmnxOspfExportPolicy5 specifies the name of 5th
Export policy to be used to be used for determining which routes
are exported from the routing table to OSPF.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.2.1.23 |
tmnxOspfManualSpfTriggerThe value of tmnxOspfManualSpfTrigger specifies a manual Dijkstra
SPF calculation trigger.
When tmnxOspfManualSpfTrigger is set to 'runTotalSpf' a normal
Dijkstra SPF calculation is performed.
When tmnxOspfManualSpfTrigger is set to 'runExternalsSpf',
only the AS External LSAs are recalculated.
GETs and GETNEXTs on this variable return 'noAction'.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.36.2.1.24 |
tmnxOspfOverloadAdmStateThe value of tmnxOspfOverloadAdmState specifies a command
used to manually make the system go in or out of overload
state. Whenever this value is set, tmnxOspfOverloadInterval
is reset to back to default.rw Status (OSPF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.2.1.25 |
tmnxOspfOverloadIntervalThe value of tmnxOspfOverloadInterval specifies how long
(in seconds) OSPF should remain in overload state. This is
reset to default when tmnxOspfOverloadAdmState is modified.
The value of 0 implies that the system is indefinitely in
overload.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.2.1.26 |
tmnxOspfBootOverloadAdmStateThe value of tmnxOspfBootOverloadAdmState specifies the
desired overload state that should be aplied after boot
Whenever this value is set, tmnxOspfBootOverloadInterval
is reset to back to default.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.36.2.1.27 |
tmnxOspfBootOverloadIntervalThe value of tmnxOspfBootOverloadInterval specifies the configured
value for OSPF for which it should remain in overload state on
boot-up. This is reset to default when tmnxOspfBootOverloadAdmState
is modified. The value of 0 implies that the system is
indefinitely in overload.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.2.1.28 |
tmnxOspfOverloadStubsThe value of tmnxOspfOverloadStubs specifies if the OSPF
stub networks should be advertised with a maximum metric value
when the system goes into overload state for any reason.
If the value is 'true', the system uses the maximum metric
value.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.2.1.29 |
tmnxOspfSpfMaxWaitThe value of tmnxOspfSpfMaxWait defines the maximum
interval between two consecutive full SPF calculations.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.2.1.30 |
tmnxOspfSpfInitialWaitThe value of tmnxOspfSpfInitialWait defines the holddown
time before a full SPF calculation delay after a topology
change.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.2.1.31 |
tmnxOspfSpfSecondWaitThe value of tmnxOspfSpfSecondWait defines the hold time
between the first and second SPF calculation. Subsequent SPF
runs will occur at exponentially increasing intervals of the
tmnxOspfSpfSecondWait value i.e., if tmnxOspfSpfSecondWait
is 1000, then the next SPF triggered by an event during this
interval will run after 2000 msec, and the subsequent one at
4000 msec, etc. until it is capped off at tmnxOspfSpfMaxWait
value. If this is configured as zero, there will be no
exponential backoff.
The SPF interval will stay at tmnxOspfSpfMaxWait value until
there are no more SPF runs scheduled in that interval. After
a full interval without any SPF runs, the SPF interval will
drop back to tmnxOspfSpfInitialWait.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.2.1.32 |
tmnxOspfLsaGenMaxWaitThe value of tmnxOspfLsaGenMaxWait defines the maximum interval
between two consecutive updates of a self generated LSA due to
any event. This is a way to manipulate the 'MinLSInterval'.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.2.1.33 |
tmnxOspfLsaGenInitialWaitThe value of tmnxOspfLsaGenInitialWait defines the initial LSA
generation delay after an event that causes the LSA generation or
update.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.2.1.34 |
tmnxOspfLsaGenSecondWaitThe value of tmnxOspfLsaGenSecondWait defines the hold time
between the first and second LSA generation.
Subsequent updates of that LSA will occur at exponentially
increasing intervals of tmnxOspfLsaGenSecondWait value i.e.,
if tmnxOspfLsaGenSecondWait is 1000, then the next LS update
triggered during this interval will be processed after 2000
msec, and the subsequent one at 4000 msec, etc. until it is
capped off at tmnxOspfLsaGenMaxWait. If this is configured
as zero, there will be no exponential backoff.
The LSA generate interval will stay at tmnxOspfLsaGenMaxWait
value until there are no more updates of that LSA triggered
in that interval. After a full interval without any updates
of that LSA, the LSA generate interval will be reset back to
tmnxOspfLsaGenInitialWait.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.2.1.35 |
tmnxOspfLsaArrivalWaitThe value of tmnxOspfLsaArrivalWait defines the minimum
interval between two consecutive updates of an LSA received
from any neighbor. Any LSA update received before that is
discarded. This is a way to manipulate the 'MinLSArrival'.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.2.1.36 |
tmnxOspfTESupportThe value of tmnxOspfTESupport indicates whether or not TEs
are supported by this instance of OSPF. When it has a value
of 'true', TEs are supported.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.2.1.37 |
tmnxOspfUnicastImportThe value of tmnxOspfUnicastImport specifies whether OSPF protocol
will submit routes into the unicast Route Table Manage(RTM).
When tmnxOspfUnicastImport has a value of 'true', the OSPF protocol
submits routes into the unicast RTM, and when it has a value of
'false', it does not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.2.1.38 |
tmnxOspfMulticastImportThe value of tmnxOspfMulticastImport specifies whether OSPF
protocol will submit routes into the multicast Reverse Path
Forwarding(RPF) Route Table Manage(RTM).
When tmnxOspfMulticastImport has a value of 'true', OSPF protocol
submits routes into the multicast RPF RTM and when it has a
value of 'false', it does not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.2.1.39 |
tmnxOspfGREnableThe value of tmnxOspfGREnable specifies whether the graceful
restart is enabled or disabled for this instance of OSPF
on the router.
When tmnxOspfGREnable has a value of 'true' graceful
restart capabilities are enabled. When it has a value
of 'false' the graceful restart is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.2.1.40 |
tmnxOspfGRHelperModeThe value of tmnxOspfGRHelperMode specifies whether the
graceful restart helper mode is enabled or disabled for this
instance of OSPF on the router.
tmnxOspfGRHelperMode is valid only if the value of
tmnxOspfGREnable is 'true'.
When tmnxOspfGRHelperMode has a value of 'true' graceful
restart helper capabilities are enabled. When it has a value
of 'false' the graceful restart helper capabilities are disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.2.1.41 |
tmnxOspfRowStatusThe tmnxOspfRowStatus variable is used for creation and deletion
of tmnxOspfGeneralTable row entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.2.1.42 |
tmnxOspfAsbrDomainIdThe value of tmnxOspfAsbrDomainId specifies the domain-id associated
with this instance of OSPF on the router.
If no value is specified for tmnxOspfAsbrDomainId, it is set to -1.rw Integer32 (-1 | 0..31) .1.3.6.1.4.1.6527.3.1.2.36.2.1.43 |
tmnxOspfIgnoreDNBitThe value of tmnxOspfIgnoreDNBit specifies whether to ignore the
DN bit for OSPF LSA packets for this instance of OSPF on the router.
When tmnxOspfIgnoreDNBit has a value of 'true' the DN bit for
OSPF LSA packets will be ignored. When it has a value of 'false'
the DN bit will not be ignored for OSPF LSA packets.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.2.1.44 |
tmnxOspfSuppressDNBitThe value of tmnxOspfSuppressDNBit specifies whether to suppress the
setting of the DN bit for OSPF LSA packets generated by this instance
of OSPF on the router.
When tmnxOspfSuppressDNBit has a value of 'true' the DN bit for
OSPF LSA packets generated by this instance of the OSPF router
will not be set. When it has a value of 'false' this instance of
the OSPF router will follow the normal proceedure to determine
whether to set the DN bit.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.2.1.45 |
tmnxOspfLdpSyncAdminStateThe value of tmnxOspfLdpSyncAdminState specifies whether the IGP-LDP
synchronization feature is enabled or disabled on all interfaces
participating in the OSPF routing protocol.
When the value is set to 'disabled', IGP immediately advertises the
actual value of the link cost for all interfaces which have the IGP-LDP
synchronization enabled if the currently advertized cost is different.
IGP-LDP synchronization for all interfaces is then disabled.rw Status (OSPF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.2.1.46 |
tmnxOspfVpnDomainTypeThe value of tmnxOspfVpnDomainType specifies type of the extended
community attribute exchanged using BGP to carry the OSPF VPN
Domain ID. This object applies to VPRN instances of OSPF only. An
attempt to modify the value of this object will result in an
'inconsistentValue' error when the vRtrID index for this row entry
is not a VPRN instance.
When the value is set to 'type0000', vpn-domain functionality is
disabled.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.36.2.1.47 |
tmnxOspfVpnDomainIdThe value of tmnxOspfVpnDomainId specifies the OSPF VPN Domain.
This is exchanged using BGP in the extended community attribute
associated with a prefix. This object applies to VPRN instances
of OSPF only. An attempt to modify the value of this object will
result in an 'inconsistentValue' error when the vRtrID index for
this row entry is not a VPRN instance.rw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.36.2.1.48 |
tmnxOspfVpnTagThe value of tmnxOspfVpnTag specifies the route tag for an OSPF VPN
on a PE router. This field is set in the tag field of the OSPF external
LSAs generated by the PE. This is mainly used to prevent routing loops.
This object applies to VPRN instances of OSPF only. An attempt to
modify the value of this object will result in an 'inconsistentValue'
error when the vRtrID index for this row entry is not a VPRN instance.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.2.1.49 |
tmnxOspfSuperBackBoneThe value of tmnxOspfSuperBackBone specifies whether CE-PE
functionality is required or not. tmnxOspfSuperBackBone indicates the
type of the LSA generated as a result of routes redistributed into
OSPF.
When the value is set to 'true' the redistributed routes are injected
as summary, external or NSSA LSAs.
When the value is set to 'false' the redistributed routes are injected
as either external or NSSA LSAs only.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.2.1.50 |
tmnxOspfLdpOverRsvpThe value of tmnxOspfLdpOverRsvp specifies whether LDP-over-RSVP
feature is enabled or disabled for a specific OSPF instance.
When tmnxOspfLdpOverRsvp is enabled, OSPF will select the endpoint
that is closest to the destination for further selection of
LDP-over-RSVP tunnels to that endpoint.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.2.1.51 |
tmnxOspfExportLimitThe value of tmnxOspfExportLimit specifies the maximum number of
routes or prefixes that can be exported into OSPF or OSPF3 from the
route table.
A value of 0 indicates that the export limit for routes or prefixes has
been disabled.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.2.1.52 |
tmnxOspfExportLimitLogPercentThe value of tmnxOspfExportLimitLogPercent specifies the percentage
of the export-limit, at which a warning log message and SNMP
notification would be sent. This would only be a warning and additional
routes will be learned up to 100% of tmnxOspfExportLimit.
A value of 0 indicates that tmnxOspfExportLimitLogPercent is disabled
and no log message or SNMP notification would be sent.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.2.1.53 |
tmnxOspfRsvpShortcutThe value of tmnxOspfRsvpShortcut indicates whether RSVP-TE shortcut
for resolving IGP routes has been enabled or disabled for OSPF.
When the value of tmnxOspfRsvpShortcut is set to true RSVP-TE shortcut
is enabled and when tmnxOspfRsvpShortcut is set to false RSVP-TE shortcut
is disabled for OSPF.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.2.1.54 |
tmnxOspfAdvertiseTunnelLinkThe value of tmnxOspfAdvertiseTunnelLink indicates whether advertisement
of LSP shortcuts into IGP has been enabled or disabled for OSPF.
When the value of tmnxOspfAdvertiseTunnelLink is set to true LSP shortcut
advertisement into IGP is enabled and when tmnxOspfAdvertiseTunnelLink is
set to false LSP shortcut advertisement into IGP is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.2.1.55 |
tmnxOspfImportPolicy1The value of tmnxOspfImportPolicy1 specifies the name of
1st import policy to be used to be used for determining which
routes are exported from the routing table to OSPF.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.2.1.56 |
tmnxOspfImportPolicy2The value of tmnxOspfImportPolicy2 specifies the name of 2nd
import policy to be used to be used for determining which routes
are imported from OSPF to the routing table.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.2.1.57 |
tmnxOspfImportPolicy3The value of tmnxOspfImportPolicy3 specifies the name of 3rd
import policy to be used to be used for determining which routes
are imported from OSPF to the routing table.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.2.1.58 |
tmnxOspfImportPolicy4The value of tmnxOspfImportPolicy4 specifies the name of 4rd
import policy to be used to be used for determining which routes
are imported from OSPF to the routing table.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.2.1.59 |
tmnxOspfImportPolicy5The value of tmnxOspfImportPolicy5 specifies the name of 5th
import policy to be used to be used for determining which routes
are imported from OSPF to the routing table.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.2.1.60 |
tmnxOspfLoopfreeAlternateThe value of tmnxOspfLoopfreeAlternate specifies whether to enable or
disable IP fast re-route capability for OSPF.
When the value of tmnxOspfLoopfreeAlternate is set to 'true' IP fast
re-route capability for OSPF is enabled and when
tmnxOspfLoopfreeAlternate is set to 'false' IP fast re-route capability
for OSPF is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.2.1.61 |
tmnxOspfStatusTableThe tmnxOspfStatusTable provides an extension of the
tmnxOspfGeneralTable for OSPF process statuses. SEQUENCE OF TmnxOspfStatusEntry .1.3.6.1.4.1.6527.3.1.2.36.3 |
tmnxOspfStatusEntryEach row entry in the tmnxOspfStatusTable represents additional
columns for status objects for an OSPF instance. TmnxOspfStatusEntry .1.3.6.1.4.1.6527.3.1.2.36.3.1 |
tmnxOspfAreaBdrRtrStatusThe value of tmnxOspfAreaBdrRtrStatus indicates whether this router
is an area border router.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.3.1.1 |
tmnxOspfBackBoneRouterThe value of tmnxOspfBackBoneRouter indicates whether or not
this router is configured as an OSPF back bone router.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.3.1.2 |
tmnxOspfStubRouterSupportThe value of tmnxOspfStubRouterSupport indicates the router's
support for stub router functionality.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.3.1.3 |
tmnxOspfAsScopeLsaCountThe value of tmnxOspfAsScopeLsaCount specifies the number of
AS-Scope (e.g. AS-External) link state advertisements in the
link-state database.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.3.1.4 |
tmnxOspfAsScopeLsaCksumSumThe value of tmnxOspfAsScopeLsaCksumSum indicates the 32-bit
unsigned sum of the LS checksums of the AS-scoped link-state
advertisements contained in the link-state database. This sum
can be used to determine if there has been a change in a router's
link-state database, and to compare the link-state database of two
routers.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.36.3.1.5 |
tmnxOspfAsScopeUnkLsaCountThe value of tmnxOspfAsScopeUnkLsaCount specifies the number of
unknown AS-Scope (e.g. AS-External) link-state advertisements in
the link-state database.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.3.1.6 |
tmnxOspfAsScopeUnkLsaCksumSumThe value of tmnxOspfAsScopeUnkLsaCksumSum indicates the 32-bit
unsigned sum of the LS checksums of the unknown AS-scoped link-state
advertisements contained in the link-state database. This sum can
be used to determine if there has been a change in a router's
link-state database, and to compare the link-state database of two
routers.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.36.3.1.7 |
tmnxOspfExternLsaCountThe value of tmnxOspfExternLsaCount indicates the number of
External LSAs (LS type 0x4005) in the link-state databasero Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.3.1.8 |
tmnxOspfExternLsaCksumSumThe value of tmnxOspfExternLsaCksumSum indicates the 32-bit
unsigned sum of the LS checksums of the external link-state
advertisements contained in the link-state database. This sum
can be used to determine if there has been a change in a router's
link state database, and to compare the link-state database of
two routers.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.36.3.1.9 |
tmnxOspfOpaqueLsaSupportThe value of tmnxOspfOpaqueLsaSupport indicates the router's
support for Opaque LSA types.
This object is valid only when tmnxOspfVersion is 'version2'.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.3.1.10 |
tmnxOspfRestartStatusThe value of tmnxOspfRestartStatus indicates the current status of
OSPF graceful restart capability.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.36.3.1.11 |
tmnxOspfRestartAgeThe value of tmnxOspfRestartAge indicates the remaining time in
the current OSPF graceful restart interval.ro TmnxOspfUpToRefreshIntervalTc UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.3.1.12 |
tmnxOspfRestartExitRcThe value of tmnxOspfRestartExitRc indicates the outcome of
the last attempt at a Graceful restart.
none (1) no restart has yet been attempted.
inProgress (2) a restart attempt is currently underway.
completed (3) the last restart completed successfully.
timedOut (4) the last restart timed out.
topologyChanged (5) the last restart was aborted due to
a topology change.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.36.3.1.13 |
tmnxOspfDiscontinuityTimeThe value of sysUpTime on the most recent occasion at which any
one of this MIB's counters suffered a discontinuity.
If no such discontinuities have occurred since the last
reinitialization of the local management subsystem, then this
object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.3.1.14 |
tmnxOspfLastEnabledTimeThe value of tmnxOspfLastEnabledTime indicates the value of
sysUpTime when tmnxOspfAdminState was last set to 'enabled'.
When tmnxOspfAdminState is set to 'disabled', the OSPF counters
are stopped; when tmnxOspfAdminState is reset to 'enabled', the
counters are reset to zero.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.3.1.15 |
tmnxOspfLastOvrflwEnteredTimeThe value of tmnxOspfLastOvrflwEnteredTime indicates
the value of sysUpTime the last time we entered overflow state.
This overflow state occurs when the number of non-default
AS-external-LSAs entries exceed the link-state database
capability.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.3.1.16 |
tmnxOspfLastOverflowExitTimeThe value of tmnxOspfLastOverflowExitTime indicates the
value of sysUpTime the last time we exited overflow state.
This overflow state occurs when the number of
non-default AS-external-LSAs entries exceed the link-state
database capability.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.3.1.17 |
tmnxOspfInOverflowStateThe value of tmnxOspfInOverflowState indicates the current
overflow state (true/False). This overflow state
occurs when the number of non-default AS-external-LSAs entries
exceed the link-state database capability.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.3.1.18 |
tmnxOspfOverloadOperStateThe value of tmnxOspfOverloadOperState indicates whether
or not the OSPF application is presently in overload
state or not.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.36.3.1.19 |
tmnxOspfOverloadRemIntervalThe value of tmnxOspfOverloadRemInterval indicates the time
for which the system will be in overload state if OSPF is in
overload state.
The value of 0 implies that the system is indefinitely in
overload state.ro TimeInterval .1.3.6.1.4.1.6527.3.1.2.36.3.1.20 |
tmnxOspfLastOverloadEntrdTimeThe value of tmnxOspfLastOverloadEntrdTime indicates the
time at which the system last went into overload state.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.3.1.21 |
tmnxOspfLastOverloadExitTimeThe value of tmnxOspfLastOverloadExitTime indicates the
time at which the system last came out of overload state.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.3.1.22 |
tmnxOspfLastOverloadEnterCodeThe value of tmnxOspfLastOverloadEnterCode indicates the
condition which caused OSPF to get into overload.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.36.3.1.23 |
tmnxOspfLastOverloadExitCodeThe value of tmnxOspfLastOverloadExitCode indicates
the reason why OSPF came out of overload state the last
time, since reset.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.36.3.1.24 |
tmnxOspfLastExtSpfRunTimeThe value of tmnxOspfLastExtSpfRunTime indicates the value of
sysUpTime when the external OSPF Dijkstra (SPF) was last run.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.3.1.25 |
tmnxOspfLastFullSpfRunTimeThe value of tmnxOspfLastFullSpfRunTime indicates the
time at which the system last performed a full Dijkstra (SPF) run.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.3.1.26 |
tmnxOspfLastFullSpfIntervalThe value of tmnxOspfLastFullSpfInterval indicates the time,
in hundredths of seconds, used to perform the most recent
total SPF calculation.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.3.1.27 |
tmnxOspfMaxSpfRunIntervalThe value of tmnxOspfMaxSpfRunInterval indicates the maximum
time, in hundredths of seconds, used to perform a total
SPF calculation.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.3.1.28 |
tmnxOspfMinSpfRunIntervalThe value of tmnxOspfMinSpfRunInterval indicates the minimum
time, in hundredths of seconds, used to perform a total
SPF calculation.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.3.1.29 |
tmnxOspfAvgSpfRunIntervalThe value of tmnxOspfAvgSpfRunInterval indicates the average
time, in hundredths of seconds, of all the total SPF
calculations performed by this OSPF router.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.3.1.30 |
tmnxOspfExtSpfRunIntervalThe value of tmnxOspfExtSpfRunInterval indicates the time,
in hundredths of seconds, used to perform the most recent
total external (not incremental) SPF calculation.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.3.1.31 |
tmnxOspfRoutesSubmittedThe value of tmnxOspfRoutesSubmitted indicates the number
of routes submitted to the Route Table Manager (RTM) by this
instance of OSPF.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.3.1.32 |
tmnxOspfOperRouterIdThe value of tmnxOspfOperRouterId specifies the 32-bit integer
used to uniquely identify the router in the Autonomous System.
The default OSPF instance will use the value specified by
tmnxOspfRouterId or the one derived from the IP layer. For
the non-default instances of OSPF, this is the same value as
tmnxOspfRouterId, which must be specified before the OSPF
instance can become operational.ro TmnxOspfRouterIdTc .1.3.6.1.4.1.6527.3.1.2.36.3.1.33 |
tmnxOspfTotalExportedRoutesThe value of tmnxOspfTotalExportedRoutes indicates the total number
of routes exported into OSPF from the route table manager when an
export policy is configured.
Value of tmnxOspfTotalExportedRoutes would be 0 when no export policy
is configured.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.3.1.34 |
tmnxOspfLastLfaSpfRunTimeThe value of tmnxOspfLastLfaSpfRunTime indicates the
time at which the system last performed a Dijkstra (LFA SPF) run.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.3.1.35 |
tmnxOspfStatisticsTableThe tmnxOspfStatisticsTable provides an extension of the
tmnxOspfGeneralTable for statistics for an OSPF instance. SEQUENCE OF TmnxOspfStatisticsEntry .1.3.6.1.4.1.6527.3.1.2.36.4 |
tmnxOspfStatisticsEntryEach row entry in the tmnxOspfStatisticsTable represents additional
columns for statistics for an OSPF instance. TmnxOspfStatisticsEntry .1.3.6.1.4.1.6527.3.1.2.36.4.1 |
tmnxOspfOriginateNewLsasThe value of tmnxOspfOriginateNewLsas indicates the number of
new link-state advertisements that have been originated.
This number is incremented each time the router originates a new
LSA.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.2 |
tmnxOspfRxNewLsasThe value of tmnxOspfRxNewLsas indicates the number of link-state
advertisements received determined to be new instantiations.
This number does not include newer instantiations
of self-originated link-state advertisements.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.3 |
tmnxOspfFullSpfRunsThe value of tmnxOspfFullSpfRuns indicates the total number of
times that complete SPF has been run on the router since OSPF
was last enabled.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.5 |
tmnxOspfExtSpfRunsThe value of tmnxOspfExtSpfRuns indicates the total number of
times that only the External portion of the SPF has been run
since OSPF was last enabled.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.6 |
tmnxOspfIncremntlInterSpfRunsThe value of tmnxOspfIncremntlInterSpfRuns indicates the
total number of incremental SPF runs triggered by new or
updated inter-area prefix or inter-area router LSAs.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.7 |
tmnxOspfIncrementalExtSpfRunsThe value of tmnxOspfIncrementalExtSpfRuns indicates the total
number of incremental SPF runs triggered by new or updated external
LSAs.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.8 |
tmnxOspfSpfAttemptsFailedThe value of tmnxOspfSpfAttemptsFailed indicates the number
of times an attempt to run SPF has failed because SPF runs
have been stopped as a result of insufficient memory resources.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.9 |
tmnxOspfNumTimesInOverloadThe value of tmnxOspfNumTimesInOverload indicates the count
of the number of times the system was overloaded.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.10 |
tmnxOspfNumTimesInOverflowThe value of tmnxOspfNumTimesInOverflow indicates the count
of the number of times the system was in the overflow state.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.11 |
tmnxOspfRoutesAddsFailedThe value of tmnxOspfRoutesAddsFailed indicates the number of
times an attempt to add a route to the Route Table Manager (RTM)
failed for this OSPF instance.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.12 |
tmnxOspfRoutesDelsFailedThe value of tmnxOspfRoutesDelsFailed indicates the number of
times an attempt to delete a route from the Route Table Manager
(RTM) failed for this instance of OSPF.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.13 |
tmnxOspfRoutesModsFailedThe value of tmnxOspfRoutesModsFailed indicates the number of
times an attempt to modify a route in the Route Table Manager (RTM)
failed for this instance of OSPF.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.14 |
tmnxOspfAreaEntriesThe value of tmnxOspfAreaEntries indicates the number of row
entries in the tmnxOspfAreaTable.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.15 |
tmnxOspfAreaLsaCountEntriesThe value of tmnxOspfAreaLsaCountEntries indicates the number of row
entries in the tmnxOspfAreaLsaCountTable.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.16 |
tmnxOspfAsLsdbEntriesThe value of tmnxOspfAsLsdbEntries indicates the number of row
entries in the tmnxOspfAsLsdbTable.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.17 |
tmnxOspfAreaLsdbEntriesThe value of tmnxOspfAreaLsdbEntries indicates the number of row
entries in the tmnxOspfAreaLsdbTable.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.18 |
tmnxOspfLinkLsdbEntriesThe value of tmnxOspfLinkLsdbEntries indicates the number of row
entries in the tmnxOspfNgLinkLsdbTable.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.19 |
tmnxOspfHostEntriesThe value of tmnxOspfHostEntries indicates the number of row
entries in the tmnxOspfHostTable.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.20 |
tmnxOspfIfEntriesThe value of tmnxOspfIfEntries indicates the number of row
entries in the tmnxOspfNgIfTable.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.21 |
tmnxOspfVirtIfEntriesThe value of tmnxOspfVirtIfEntries indicates the number of row
entries in the tmnxOspfVirtIfTable.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.22 |
tmnxOspfNbrEntriesThe value of tmnxOspfNbrEntries indicates the number of row
entries in the tmnxOspfNgNbrTable.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.23 |
tmnxOspfCfgNbrEntriesThe value of tmnxOspfCfgNbrEntries indicates the number of row
entries in the tmnxOspfCfgNbrTable.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.24 |
tmnxOspfVirtNbrEntriesThe value of tmnxOspfVirtNbrEntries indicates the number of row
entries in the tmnxOspfVirtNbrTable.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.25 |
tmnxOspfAreaAggrEntriesThe value of tmnxOspfAreaAggrEntries indicates the number of row
entries in the tmnxOspfAreaAggrTable.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.26 |
tmnxOspfIfMD5KeyEntriesThe value of tmnxOspfIfMD5KeyEntries indicates the number of row
entries in the tmnxOspfNgIfMD5KeyTable.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.27 |
tmnxOspfVirtIfMD5KeyEntriesThe value of tmnxOspfVirtIfMD5KeyEntries indicates the number of row
entries in the tmnxOspfVirtIfMD5KeyTable.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.28 |
tmnxOspfCSPFRequestsThe value of tmnxOspfCSPFRequests indicates the
number of CSPF requests made to the OSPF protocol.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.29 |
tmnxOspfCSPFDroppedRequestsThe value of tmnxOspfCSPFDroppedRequests indicates the
number of dropped CSPF requests made by the OSPF protocol.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.30 |
tmnxOspfCSPFPathsFoundThe value of tmnxOspfCSPFPathsFound indicates the number of
of paths found for the requests made to OSPF protocol.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.31 |
tmnxOspfCSPFPathsNotFoundThe value of tmnxOspfCSPFPathsNotFound indicates the number of
of paths not found for the requests made to OSPF protocol.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.32 |
tmnxOspfShamIfEntriesThe value of tmnxOspfShamIfEntries indicates the number of row
entries in the tmnxOspfShamIfTable.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.33 |
tmnxOspfShamNbrEntriesThe value of tmnxOspfShamNbrEntries indicates the number of row
entries in the tmnxOspfShamNbrTable.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.34 |
tmnxOspfShamIfMD5KeyEntriesThe value of tmnxOspfShamIfMD5KeyEntries indicates the number of row
entries in the tmnxOspfShamIfMD5KeyTable.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.35 |
tmnxOspfLfaSpfRunsThe value of tmnxOspfLfaSpfRuns indicates the total number of
times that complete LFA SPF has been run on the router since OSPF
was last enabled.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.4.1.36 |
tmnxOspfChangedTableThe tmnxOspfChangedTable provides an extension of the
tmnxOspfGeneralTable for last changed timestamps for an
OSPF instance. SEQUENCE OF TmnxOspfChangedEntry .1.3.6.1.4.1.6527.3.1.2.36.5 |
tmnxOspfChangedEntryEach row entry in the tmnxOspfChangedTable represents additional
columns for last changed timestamps for an OSPF instance. TmnxOspfChangedEntry .1.3.6.1.4.1.6527.3.1.2.36.5.1 |
tmnxOspfAreaTableChangedThe value of tmnxOspfAreaTableChanged indicates the sysUpTime
when a configurable object in the tmnxOspfAreaTable was last
modified for this OSPF instance. If no modifications have been
made since this instance of OSPF was created,
tmnxOspfAreaTableChanged will have a 0 value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.5.1.1 |
tmnxOspfHostTableChangedThe value of tmnxOspfHostTableChanged indicates the sysUpTime
when a configurable object in the tmnxOspfHostTable was last
modified for this OSPF instance. If no modifications have been
made since this instance of OSPF was created, tmnxOspfHostTableChanged
will have a 0 value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.5.1.2 |
tmnxOspfIfTableChangedThe value of tmnxOspfIfTableChanged indicates the sysUpTime
when a configurable object in the tmnxOspfNgIfTable was last
modified for this OSPF instance. If no modifications have been
made since this instance of OSPF was created, tmnxOspfIfTableChanged
will have a 0 value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.5.1.3 |
tmnxOspfVirtIfTableChangedThe value of tmnxOspfVirtIfTableChanged indicates the sysUpTime
when a configurable object in the tmnxOspfVirtIfTable was last
modified for this OSPF instance. If no modifications have been
made since this instance of OSPF was created,
tmnxOspfVirtIfTableChanged will have a 0 value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.5.1.4 |
tmnxOspfNbrTableChangedThe value of tmnxOspfNbrTableChanged indicates the sysUpTime
when a configurable object in the tmnxOspfNgNbrTable was last
modified for this OSPF instance. If no modifications have been
made since this instance of OSPF was created,
tmnxOspfNbrTableChanged will have a 0 value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.5.1.5 |
tmnxOspfCfgNbrTableChangedThe value of tmnxOspfCfgNbrTableChanged indicates the sysUpTime
when a configurable object in the tmnxOspfCfgNbrTable was last
modified for this OSPF instance. If no modifications have been
made since this instance of OSPF was created,
tmnxOspfCfgNbrTableChanged will have a 0 value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.5.1.6 |
tmnxOspfVirtNbrTableChangedThe value of tmnxOspfVirtNbrTableChanged indicates the sysUpTime
when a configurable object in the tmnxOspfVirtNbrTable was last
modified for this OSPF instance. If no modifications have been
made since this instance of OSPF was created,
tmnxOspfVirtNbrTableChanged will have a 0 value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.5.1.7 |
tmnxOspfAreaAggTableChangedThe value of tmnxOspfAreaAggTableChanged indicates the sysUpTime
when a configurable object in the tmnxOspfAreaAggrTable was last
modified for this OSPF instance. If no modifications have been
made since this instance of OSPF was created,
tmnxOspfAreaAggTableChanged will have a 0 value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.5.1.8 |
tmnxOspfIfMD5KeyTableChangedThe value of tmnxOspfIfMD5KeyTableChanged indicates the sysUpTime
when a configurable object in the tmnxOspfNgIfMD5KeyTable was last
modified for this OSPF instance. If no modifications have been
made since this instance of OSPF was created,
tmnxOspfIfMD5KeyTableChanged will have a 0 value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.5.1.9 |
tmnxOspfVirtIfMD5KeyTableChangedThe value of tmnxOspfVirtIfMD5KeyTableChanged indicates the sysUpTime
when a configurable object in the tmnxOspfVirtIfMD5KeyTable was last
modified for this OSPF instance. If no modifications have been
made since this instance of OSPF was created,
tmnxOspfVirtIfMD5KeyTableChanged will have a 0 value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.5.1.10 |
tmnxOspfShamIfTableChangedThe value of tmnxOspfShamIfTableChanged indicates the sysUpTime
when a configurable object in the tmnxOspfShamIfTable was last
modified for this OSPF instance. If no modifications have been
made since this instance of OSPF was created,
tmnxOspfShamIfTableChanged will have a 0 value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.5.1.11 |
tmnxOspfShamNbrTableChangedThe value of tmnxOspfShamNbrTableChanged indicates the sysUpTime
when a configurable object in the tmnxOspfShamNbrTable was last
modified for this OSPF instance. If no modifications have been
made since this instance of OSPF was created,
tmnxOspfShamNbrTableChanged will have a 0 value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.5.1.12 |
tmnxOspfShamIfMD5KeyTableChangedThe value of tmnxOspfShamIfMD5KeyTableChanged indicates the sysUpTime
when a configurable object in the tmnxOspfShamIfMD5KeyTable was last
modified for this OSPF instance. If no modifications have been
made since this instance of OSPF was created,
tmnxOspfShamIfMD5KeyTableChanged will have a 0 value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.5.1.13 |
tmnxOspfAreaTableThe tmnxOspfAreaTable contains information describing the
configured parameters and cumulative statistics of the router's
attached areas. SEQUENCE OF TmnxOspfAreaEntry .1.3.6.1.4.1.6527.3.1.2.36.6 |
tmnxOspfAreaEntryThe tmnxOspfAreaEntry contains information describing the
configured parameters and cumulative statistics of one of the
router's attached areas. TmnxOspfAreaEntry .1.3.6.1.4.1.6527.3.1.2.36.6.1 |
tmnxOspfAreaIdThe value of tmnxOspfAreaId specifies a 32-bit integer uniquely
identifying an area. Area ID 0 is used for the OSPF backbone. TmnxOspfAreaIdTc .1.3.6.1.4.1.6527.3.1.2.36.6.1.1 |
tmnxOspfAreaStatusThe tmnxOspfAreaStatus variable is used for creation and deletion
of tmnxOspfAreaTable row entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.6.1.2 |
tmnxOspfAreaLastChangedThe value of tmnxOspfAreaLastChanged indicates the sysUpTime
when a configurable object in this row was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.6.1.3 |
tmnxOspfImportAsExternThe value of tmnxOspfImportAsExtern specifies whether an area
is a Stub area, NSSA, or standard area. AS-scope LSAs are not
imported into Stub Areas or NSSAs. NSSAs import AS-External
data as NSSA LSAs which have Area-scoperw Enumeration .1.3.6.1.4.1.6527.3.1.2.36.6.1.4 |
tmnxOspfAreaSummaryThe value of tmnxOspfAreaSummary specifies how the Inter-Area
LSAs are imported into stub areas. It has no effect on other areas.
If it is 'noAreaSummary (1)', the router will neither originate
nor propagate Inter-Area LSAs into the stub area. It will rely
entirely on its default route.
If it is 'sendAreaSummary (2)', the router will both summarize
and propagate Inter-Area LSAs.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.36.6.1.5 |
tmnxOspfAreaRangeBlackholeThe value of tmnxOspfAreaRangeBlackhole specifies whether or not
a blackhole route needs to be installed for the aggregates
configured in this area. If the value is 'true', a lowest
priority backhole route is installed for advertised aggregates
in this area. Note that if the value is 'false', the blackhole
route is not installed and there is a potential for a routing
loop.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.6.1.6 |
tmnxOspfStubMetricThe value of tmnxOspfStubMetric specifies the metric value
advertised for the default route into Stub and NSSA areas.rw BigMetric (OSPF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.6.1.7 |
tmnxOspfAreaStubMetricTypeThe value of tmnxOspfAreaStubMetricType specifies the type of metric
advertised as a default route.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.36.6.1.8 |
tmnxOspfAreaOriginateDefaultThe value of tmnxOspfAreaOriginateDefault indicates whether or not
when configuring an NSSA with no summaries, the Area Border Router
(ABR) will inject a type-7 LSA default route into the NSSA area.
The default behavior is to inject a type-3 LSA default route, but
some older implementations expect a type-7 LSA default route.
When tmnxOspfAreaOriginateDefault has a value of 'originateType7',
type-7 LSA default routes are injected into an NSSA configured
with no summaries.
When tmnxOspfAreaOriginateDefault has a value of 'originateType3',
type-3 LSA default routes are injected into an NSSA configured
with no summaries.
When tmnxOspfAreaOriginateDefault has a value of 'noOriginate',
no default routes are generated.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.36.6.1.9 |
tmnxOspfAreaNssaRedistributeThe value of tmnxOspfAreaNssaRedistribute specifies whether or
not extenal routes are to be injected or redistributed into the NSSA
area.
Setting tmnxOspfAreaNssaRedistribute equal 'false' causes
external routes to be not injected or redistributed
into the NSSA area.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.6.1.10 |
tmnxOspfAreaNssaTranslatorRoleThe value of tmnxOspfAreaNssaTranslatorRole specifies an
NSSA Border router's ability to perform NSSA translation
of NSSA-LSAs into AS-External-LSAs.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.36.6.1.11 |
tmnxOspfAreaNssaTranslatorStabIntThe value of tmnxOspfAreaNssaTranslatorStabInt specifies the
number of seconds after an elected translator determines its
services are no longer required, that it should continue to
perform its translation duties.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.6.1.12 |
tmnxOspfAreaBdrRtrCountThe value of tmnxOspfAreaBdrRtrCount indicates the total
number of area border routers reachable within this area.
This is initially zero, and is calculated in each SPF pass.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.6.1.13 |
tmnxOspfAreaAsBdrRtrCountThe value of tmnxOspfAreaAsBdrRtrCount indicates the total
number of Autonomous System border routers reachable within
this area. This is initially zero, and is calculated in each
SPF pass.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.6.1.14 |
tmnxOspfAreaScopeLsaCountThe value of tmnxOspfAreaScopeLsaCount indicates the total
number of Area-Scope link state advertisements in this area's
link-state database.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.6.1.15 |
tmnxOspfAreaScopeLsaCksumSumThe value of tmnxOspfAreaScopeLsaCksumSum indicates the 32-bit
unsigned sum of the Area-Scope link state advertisements' LS
checksums contained in this area's link-state database. The sum
can be used to determine if there has been a change in a router's
link-state database, and to compare the link-state database of
two routers.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.36.6.1.16 |
tmnxOspfAreaScopeUnkLsaCountThe value of tmnxOspfAreaScopeUnkLsaCount indicates the total
number of unknown Area-Scope link-state advertisements in this
area's link-state database.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.6.1.17 |
tmnxOspfAreaScopeUnkLsaCksumSumThe value of tmnxOspfAreaScopeUnkLsaCksumSum indicates the 32-bit
unsigned sum of the unknown Area-Scope link state advertisements'
LS checksums contained in this area's link-state database. The sum
can be used to determine if there has been a change in a router's
link-state database, and to compare the link-state database of
two routers.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.36.6.1.18 |
tmnxOspfAreaNssaTranslatorStateThe value of tmnxOspfAreaNssaTranslatorState indicates if
and how an NSSA Border router is performing NSSA translation
of NSSA-LSAs into AS-External-LSAs. When this object is set
to 'enabled', the NSSA Border router's tmnxOspfAreaNssaTranslatorRole
has been set to always. When this object is set to 'elected',
a candidate NSSA Border router is translating NSSA-LSAs into
AS-External-LSAs. When this object is set to 'disabled', a
candidate NSSA Border router is NOT translating NSSA-LSAs into
AS-External-LSAs.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.36.6.1.19 |
tmnxOspfAreaActiveInterfacesThe value of tmnxOspfAreaActiveInterfaces indicates the
total number of currently active interfaces in this area.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.6.1.20 |
tmnxOspfAreaInterfaceCountThe value of tmnxOspfAreaInterfaceCount indicates total number
of interfaces configured in this area.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.6.1.21 |
tmnxOspfAreaVirtualLinkCountThe value of tmnxOspfAreaVirtualLinkCount indicates the total number
of virtual links configured through this area.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.6.1.22 |
tmnxOspfAreaLastSpfRunTimeThe value of tmnxOspfAreaLastSpfRunTime indicates the
sysUpTime when Intra-area SPF was last run on this area.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.6.1.23 |
tmnxOspfAreaSpfRunsThe value of tmnxOspfAreaSpfRuns indicates the number of
times that the intra-area route table has been calculated
using this area's link-state database. This is typically done
using Dijkstra's algorithm.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.6.1.24 |
tmnxOspfAreaNssaTranslatorEventsThe value of tmnxOspfAreaNssaTranslatorEvents indicates the
number of Translator State changes that have occurred since
the last boot-up.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.6.1.25 |
tmnxOspfAreaNeighborCountThe value of tmnxOspfAreaNeighborCount indicates total number
of neighbors configured in this area.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.6.1.26 |
tmnxOspfAreaShamLinkCountThe value of tmnxOspfAreaShamLinkCount indicates the total number
of sham links configured in this area.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.6.1.27 |
tmnxOspfAreaKeyRolloverIntervalThe value of tmnxOspfAreaKeyRolloverInterval specifies the time after
which a key rollover will start.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.6.1.28 |
tmnxOspfAreaLoopfreeAltExcludeThe value of tmnxOspfAreaLoopfreeAltExclude specifies whether or not
the OSPF area should be excluded during LFA calculations. If the value
is 'true', the OSPF area is excluded from LFA calculations. If the
value is 'false', the OSPF area is included in LFA calculations.
The value of tmnxOspfAreaLoopfreeAltExclude is only valid when
tmnxOspfLoopfreeAlternate has a value of 'true'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.6.1.29 |
tmnxOspfAreaLsaCountTableThe tmnxOspfAreaLsaCountTable maintains per area per LSA type
counters. SEQUENCE OF TmnxOspfAreaLsaCountEntry .1.3.6.1.4.1.6527.3.1.2.36.7 |
tmnxOspfAreaLsaCountEntrytmnxOspfAreaLsaCountEntry contains link state advertisements (LSAs)
counters of a given type of a given area. TmnxOspfAreaLsaCountEntry .1.3.6.1.4.1.6527.3.1.2.36.7.1 |
tmnxOspfAreaLsaCountLsaTypeThe value of tmnxOspfAreaLsaCountLsaType identifies a row in
this table for a specific LSA type within an area.
When tmnxOspfVersion has a value of 'version2', the LSA types
are limited to these values:
routerLink (1),
networkLink (2),
summaryLink (3),
asSummaryLink (4),
multicastLink (6),
nssaExternalLink (7),
areaOpaqueLink (10)
When tmnxOspfVersion has a value of 'version3', this value is
taken from the lower 13-bits of the 'LsType' field. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.7.1.1 |
tmnxOspfAreaLsaCountNumberThe value of tmnxOspfAreaLsaCountNumber indicates the number
of LSAs of tmnxOspfAreaLsaCountLsaType with this area.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.7.1.2 |
tmnxOspfAsLsdbTableThe OSPF Process's AS-Scope Link State Database. SEQUENCE OF TmnxOspfAsLsdbEntry .1.3.6.1.4.1.6527.3.1.2.36.8 |
tmnxOspfAsLsdbEntryA single AS-Scope Link State Advertisement. TmnxOspfAsLsdbEntry .1.3.6.1.4.1.6527.3.1.2.36.8.1 |
tmnxOspfAsLsdbTypeThe value of tmnxOspfAsLsdbType specifies the type of the link-state
advertisement. Each link-state type has a separate advertisement
format. AS-Scope LSAs not recognized by the router may be stored
in the database. Unsigned32(0..'FFFFFFFF'h) .1.3.6.1.4.1.6527.3.1.2.36.8.1.1 |
tmnxOspfAsLsdbRouterIdThe value of tmnxOspfAsLsdbRouterId specifies the 32-bit number
that uniquely identifies the originating router in the Autonomous
System. TmnxOspfRouterIdTc .1.3.6.1.4.1.6527.3.1.2.36.8.1.2 |
tmnxOspfAsLsdbLsidThe value of tmnxOspfAsLsdbLsid specifies the Link State ID that
is an LS Type Specific field containing a unique identifier;
it identifies the piece of the routing domain that is being
described by the advertisement. In OSPFv3, the LSID has no
addressing semantics. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.8.1.3 |
tmnxOspfAsLsdbSequenceThe value of tmnxOspfAsLsdbSequence indicates the signed 32-bit
integer sequence number field. It is used to detect old and
duplicate link-state advertisements. The space of sequence
numbers is linearly ordered. The larger the sequence number
the more recent the advertisement.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.36.8.1.4 |
tmnxOspfAsLsdbAgeThe value of tmnxOspfAsLsdbAge indicates the age of the link-state
advertisement in seconds.ro Integer32 -- Should be 0..'MaxAge' -- unless 'DoNotAge' bit is set UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.8.1.5 |
tmnxOspfAsLsdbChecksumThe value of tmnxOspfAsLsdbChecksum indicates the checksum of
the complete contents of the advertisement, excepting the age
field. The age field is excepted so that an advertisement's age
can be incremented without updating the checksum. The checksum
used is the same that is used for ISO connectionless datagrams;
it is commonly referred to as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.36.8.1.6 |
tmnxOspfAsLsdbAdvertisementThe value of tmnxOspfAsLsdbAdvertisement indicates the entire
Link State Advertisement, including its header.ro OCTET STRING .1.3.6.1.4.1.6527.3.1.2.36.8.1.7 |
tmnxOspfAsLsdbTypeKnownThe value of tmnxOspfAsLsdbTypeKnown indicates whether the
LSA type is recognized by this Router.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.8.1.8 |
tmnxOspfAreaLsdbTableThe tmnxOspfAreaLsdbTable continins the OSPF Process's Area-Scope
Link State Database. SEQUENCE OF TmnxOspfAreaLsdbEntry .1.3.6.1.4.1.6527.3.1.2.36.9 |
tmnxOspfAreaLsdbEntryThe tmnxOspfAreaLsdbEntry contains information about a single
Area-Scope Link State Advertisement. TmnxOspfAreaLsdbEntry .1.3.6.1.4.1.6527.3.1.2.36.9.1 |
tmnxOspfAreaLsdbAreaIdThe value of tmnxOspfAreaLsdbAreaId specifies the 32-bit
identifier of the Area from which the LSA was received. TmnxOspfAreaIdTc .1.3.6.1.4.1.6527.3.1.2.36.9.1.1 |
tmnxOspfAreaLsdbTypeThe value of tmnxOspfAreaLsdbType specifies the type of the
link state advertisement. Each link state type has a separate
advertisement format. Area-Scope LSAs unrecognized by the router
are also stored in this database. Unsigned32(0..'FFFFFFFF'h) .1.3.6.1.4.1.6527.3.1.2.36.9.1.2 |
tmnxOspfAreaLsdbRouterIdThe value of tmnxOspfAreaLsdbRouterId specifies the 32-bit number
that uniquely identifies the originating router in the Autonomous
System. TmnxOspfRouterIdTc .1.3.6.1.4.1.6527.3.1.2.36.9.1.3 |
tmnxOspfAreaLsdbLsidThe value of tmnxOspfAreaLsdbLsid specifies the Link State ID that
is an LS Type Specific field containing a unique identifier;
it identifies the piece of the routing domain that is being
described by the advertisement. In OSPFv3, the LSID has no
addressing semantics. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.9.1.4 |
tmnxOspfAreaLsdbSequenceThe value of tmnxOspfAreaLsdbSequence indicates the signed
32-bit integer that is the sequence number field. It is used
to detect old and duplicate link-state advertisements. The
space of sequence numbers is linearly ordered. The larger
the sequence number the more recent the advertisement.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.36.9.1.5 |
tmnxOspfAreaLsdbAgeThe value of tmnxOspfAreaLsdbAge indicates the age of the
link-state advertisement in seconds.ro Integer32 -- Should be 0..MaxAge -- unless 'DoNotAge' bit is set UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.9.1.6 |
tmnxOspfAreaLsdbChecksumThe value of tmnxOspfAreaLsdbChecksum indicates the checksum
of the complete contents of the advertisement, excepting the
age field. The age field is excepted so that an advertisement's
age can be incremented without updating the checksum. The checksum
used is the same that is used for ISO connectionless datagrams;
it is commonly referred to as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.36.9.1.7 |
tmnxOspfAreaLsdbAdvertisementThe value of tmnxOspfAreaLsdbAdvertisement indicates the entire
Link State Advertisement, including its header.ro OCTET STRING .1.3.6.1.4.1.6527.3.1.2.36.9.1.8 |
tmnxOspfAreaLsdbTypeKnownThe value of tmnxOspfAreaLsdbTypeKnown indicates whether the
LSA type is recognized by this Router.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.9.1.9 |
tmnxOspfLinkLsdbTableThe tmnxOspfLinkLsdbTable contains the OSPF Process's Link-Scope
Link State Database.
This table is obsoleted in release 9.0. It is replaced with
tmnxOspfNgLinkLsdbTableobsolete SEQUENCE OF TmnxOspfLinkLsdbEntry .1.3.6.1.4.1.6527.3.1.2.36.10 |
tmnxOspfLinkLsdbEntryThe tmnxOspfLinkLsdbEntry contains information for a single
Link-Scope Link State Advertisement.obsolete TmnxOspfLinkLsdbEntry .1.3.6.1.4.1.6527.3.1.2.36.10.1 |
tmnxOspfLinkLsdbIfIndexThe value of tmnxOspfLinkLsdbIfIndex specifies the identifier
of the link from which the LSA was received.obsolete InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.10.1.1 |
tmnxOspfLinkLsdbIfInstIdThe value of tmnxOspfLinkLsdbIfInstId specifies the identifier
of the interface instance from which the LSA was received.obsolete TmnxOspfIfInstIdTc .1.3.6.1.4.1.6527.3.1.2.36.10.1.2 |
tmnxOspfLinkLsdbTypeThe value of tmnxOspfLinkLsdbType specifies the type of the
link state advertisement. Each link state type has a separate
advertisement format. Link-Scope LSAs unrecognized by the router
are also stored in this database.obsolete Unsigned32(0..'FFFFFFFF'h) .1.3.6.1.4.1.6527.3.1.2.36.10.1.3 |
tmnxOspfLinkLsdbRouterIdThe value of tmnxOspfLinkLsdbRouterId specifies the 32-bit number
that uniquely identifies the originating router in the Autonomous
System.obsolete TmnxOspfRouterIdTc .1.3.6.1.4.1.6527.3.1.2.36.10.1.4 |
tmnxOspfLinkLsdbLsidThe value of tmnxOspfLinkLsdbLsid specifies the Link State ID that
is an LS Type Specific field containing a unique identifier;
it identifies the piece of the routing domain that is being
described by the advertisement. In OSPFv3, the LSID has no
addressing semantics.obsolete Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.10.1.5 |
tmnxOspfLinkLsdbSequenceThe value of tmnxOspfLinkLsdbSequence indicates the signed
32-bit integer sequence number field. It is used to detect
old and duplicate link-state advertisements. The space of
sequence numbers is linearly ordered. The larger the sequence
number the more recent the advertisement.roobsolete Integer32 .1.3.6.1.4.1.6527.3.1.2.36.10.1.6 |
tmnxOspfLinkLsdbAgeThe value of tmnxOspfLinkLsdbAge indicates the age of the
link-state advertisement in seconds.roobsolete Integer32 -- Should be 0..'MaxAge' -- unless 'DoNotAge' bit is set UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.10.1.7 |
tmnxOspfLinkLsdbChecksumThe value of tmnxOspfLinkLsdbChecksum indicates the checksum
of the complete contents of the advertisement, excepting the
age field. The age field is excepted so that an advertisement's
age can be incremented without updating the checksum. The
checksum used is the same that is used for ISO connectionless
datagrams; it is commonly referred to as the Fletcher checksum.roobsolete Integer32 .1.3.6.1.4.1.6527.3.1.2.36.10.1.8 |
tmnxOspfLinkLsdbAdvertisementThe value of tmnxOspfLinkLsdbAdvertisement indicates the entire
Link State Advertisement, including its header.roobsolete OCTET STRING .1.3.6.1.4.1.6527.3.1.2.36.10.1.9 |
tmnxOspfLinkLsdbTypeKnownThe value of tmnxOspfLinkLsdbTypeKnown indicates whether the
LSA type is recognized by this Router.roobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.10.1.10 |
tmnxOspfHostTableThe tmnxOspfHostTable contains the list of Hosts, and their
metrics, that the router will advertise as host routes. SEQUENCE OF TmnxOspfHostEntry .1.3.6.1.4.1.6527.3.1.2.36.11 |
tmnxOspfHostEntryThe tmnxOspfHostEntry contains information about a metric to be
advertised when a given host is reachable. TmnxOspfHostEntry .1.3.6.1.4.1.6527.3.1.2.36.11.1 |
tmnxOspfHostAddressTypeThe value of tmnxOspfHostAddressType specifis the address type of
tmnxOspfHostAddress. Only IPv4 or IPv6 addresses without zone index
are expected. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.36.11.1.1 |
tmnxOspfHostAddressThe value of tmnxOspfHostAddress specifies the IP Address of the
Host. This MUST be a Global address. InetAddress .1.3.6.1.4.1.6527.3.1.2.36.11.1.2 |
tmnxOspfHostMetricThe value of tmnxOspfHostMetric specifies the metric to be
advertised.rw Metric (OSPF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.11.1.3 |
tmnxOspfHostStatusThe value of tmnxOspfHostStatus controls the status of this
row entry. The use of RowStatus is covered in
more detail in [6].rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.11.1.4 |
tmnxOspfHostLastChangedThe value of tmnxOspfHostLastChanged indicates the sysUpTime
when a configurable object in this row was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.11.1.5 |
tmnxOspfHostAreaIDThe value of tmnxOspfHostAreaID specifies he Area the Host
Entry is to be found within. By default, the area that a
subsuming OSPF interface is in, or Area 0rw TmnxOspfAreaIdTc .1.3.6.1.4.1.6527.3.1.2.36.11.1.6 |
tmnxOspfIfTableThe tmnxOspfIfTable contains information about the interfaces
associated with OSPF.
This table is obsoleted in release 9.0. It is replaced with
tmnxOspfNgIfTable and tmnxOspfNgIfOperTable.obsolete SEQUENCE OF TmnxOspfIfEntry .1.3.6.1.4.1.6527.3.1.2.36.12 |
tmnxOspfIfEntryThe tmnxOspfIfEntry contains information about one interface
associated with OSPF.obsolete TmnxOspfIfEntry .1.3.6.1.4.1.6527.3.1.2.36.12.1 |
tmnxOspfIfIndexThe value of tmnxOspfIfIndex specifies the interface index of
this OSPF interface. It corresponds to the interface index of the
IP interface on which OSPF is configured.obsolete InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.12.1.1 |
tmnxOspfIfInstIdThe value of tmnxOspfIfInstId specifies the OSPF instance. It
enables multiple interface instances of OSPF to be run over a
single link. Each protocol instance would be assigned a separate
ID. This ID has local link significance only.obsolete TmnxOspfIfInstIdTc .1.3.6.1.4.1.6527.3.1.2.36.12.1.2 |
tmnxOspfIfStatusThe value of tmnxOspfIfStatus controls creation and deletion of
a row entry in this table.rwobsolete RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.12.1.3 |
tmnxOspfIfLastChangedThe value of tmnxOspfIfLastChanged indicates the sysUpTime
when a configurable object in this row was last modified.roobsolete TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.12.1.4 |
tmnxOspfIfAreaIdThe value of tmnxOspfIfAreaId specifies a 32-bit integer uniquely
identifying the area to which the interface connects. Area ID
0 is used for the OSPF backbone.rwobsolete TmnxOspfAreaIdTc .1.3.6.1.4.1.6527.3.1.2.36.12.1.5 |
tmnxOspfIfCfgTypeThe value of tmnxOspfIfCfgType specifies the OSPF interface type.
The value of 'unspecified' is never returned in response to a query.
It is only used in SET requests to reset the interface type to its
default value based on the underlying physical interface type.rwobsolete TmnxOspfIfTypeTc .1.3.6.1.4.1.6527.3.1.2.36.12.1.6 |
tmnxOspfIfAdminStateThe value of tmnxOspfIfAdminState specifies the OSPF interface's
administrative status. The value formed on the interface, and the
interface will be advertised as an internal route to some area.
The value 'disabled' denotes that the interface is external to OSPF.rwobsolete Status (OSPF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.12.1.7 |
tmnxOspfIfRtrPriorityThe value of tmnxOspfIfRtrPriority specifies the priority of
this interface. Used in multi-access networks, this field is
used in the designated router election algorithm. The value 0
signifies that the router is not eligible to become the designated
router on this particular network. In the event of a tie in
this value, routers will use their Router ID as a tie breaker.rwobsolete DesignatedRouterPriority (OSPF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.12.1.8 |
tmnxOspfIfTransitDelayThe value of tmnxOspfIfTransitDelay specifies the estimated
number of seconds it takes to transmit a link state update packet
over this interface.rwobsolete TmnxOspfUpToRefreshIntervalTc .1.3.6.1.4.1.6527.3.1.2.36.12.1.9 |
tmnxOspfIfRetransIntervalThe value of tmnxOspfIfRetransInterval specifies the number of
seconds between link state advertisement retransmissions, for
adjacencies belonging to this interface. This value is also used
when retransmitting database description and link state request
packets.rwobsolete TmnxOspfUpToRefreshIntervalTc .1.3.6.1.4.1.6527.3.1.2.36.12.1.10 |
tmnxOspfIfHelloIntervalThe value of tmnxOspfIfHelloInterval specifies the length of time,
in seconds, between the Hello packets that the router sends on the
interface. This value MUST be the same for all routers attached to
a common network.rwobsolete HelloRange UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.12.1.11 |
tmnxOspfIfRtrDeadIntervalThe value of tmnxOspfIfRtrDeadInterval specifies the number of
seconds that a router's Hello packets have not been seen before
its neighbors declare the router down on the interface. This
should be some multiple of the Hello interval.rwobsolete TmnxOspfDeadIntRangeTc UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.12.1.12 |
tmnxOspfIfPollIntervalThe value of tmnxOspfIfPollInterval specifies the larger time
interval, in seconds, between the Hello packets sent to an inactive
non-broadcast multi-access neighbor.rwobsolete Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.12.1.13 |
tmnxOspfIfMulticastForwardingThe value of tmnxOspfIfMulticastForwarding specifies the way
multicasts should be forwarded on this interface: not forwarded,
forwarded as data link multicasts, or forwarded as data link
unicasts. Data link multicasting is not meaningful on point-to-point
and NBMA interfaces, and setting tmnxOspfIfMulticastForwarding to 0
effectively disables all multicast forwarding.rwobsolete Enumeration .1.3.6.1.4.1.6527.3.1.2.36.12.1.14 |
tmnxOspfIfCfgMTUThe value of tmnxOspfIfCfgMTU specifies the desired size of the
largest packet which can be sent/received on this OSPF interface,
specified in octets. This size DOES include the underlying IP
header length, but not the underlying layer headers/trailers.
Setting tmnxOspfIfCfgMTU to a value of zero (0), causes the agent
to recalculate the default MTU size which can vary based on the
current setting of tmnxPortMode and tmnxPortEncapType variables
for the port to which this OSPF interface is bound.rwobsolete Integer32 (0 | 512..9198) .1.3.6.1.4.1.6527.3.1.2.36.12.1.15 |
tmnxOspfIfCfgMetricThe value of tmnxOspfIfCfgMetric specifies the desired
metric value assigned to this interface. The default value
'0' causes the value of the Metric to be calculated as
(Reference Bandwidth / ifSpeed). The value of the reference
bandwidth is configured by the tmnxOspfReferenceBandwidth object.rwobsolete Metric (OSPF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.12.1.16 |
tmnxOspfIfPassiveThe value of tmnxOspfIfPassive specifies whether or
or not HELLOs are to be sent out on this interface and
whether or not the router advertises it as STUB network/link
in its router LSAs. If true, no HELLOs will be sent, and the
interface is advertised as a STUB link.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.12.1.17 |
tmnxOspfIfAdvtSubnetThe value of tmnxOspfIfAdvtSubnet specifies the advertisement
method. When tmnxOspfIfAdvtSubnet is set to 'true', OSPF will
advertise the network number and netmask instead of the
individual host-routes of an active point-to-point interface.
Setting a value for this object has no effect when tmnxOspfVersion
has the value 'version3'.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.12.1.18 |
tmnxOspfIfDemandThe value of tmnxOspfIfDemand specifies whether Demand OSPF
procedures (hello suppression to FULL neighbors and setting the
'DoNotAge' flag on propagated LSAs) should be performed on this
OSPF interface.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.12.1.19 |
tmnxOspfIfDemandNbrProbeThe value of tmnxOspfIfDemandNbrProbe specifies whether or not
neighbor probing is enabled to determine whether or not the neighbor
is inactive. Neighbor probing is disabled by default.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.12.1.20 |
tmnxOspfIfDemandNbrProbeRetxLimitThe value of tmnxOspfIfDemandNbrProbeRetxLimit specifies the
number of consecutive LSA retransmissions before the neighbor
is deemed inactive and the neighbor adjacency is brought down.rwobsolete Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.12.1.21 |
tmnxOspfIfDemandNbrProbeIntervalThe value of tmnxOspfIfDemandNbrProbeInterval specifies how often
the neighbor will be probed.rwobsolete Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.12.1.22 |
tmnxOspfIfAuthTypeThe value of tmnxOspfIfAuthType specifies the authentication
type to use for an interface.
Note that this object can be used to engage in significant attacks
against an OSPF router.rwobsolete TmnxOspfAuthenticationType .1.3.6.1.4.1.6527.3.1.2.36.12.1.23 |
tmnxOspfIfAuthKeyThe value of tmnxOspfIfAuthKey specifies the authentication key
string. The cleartext password is used as an OSPF Authentication
key when simplePassword security is enabled. This object does not
access any OSPF Cryptographic (e.g. MD5) Authentication Key under
any circumstance.
If the key length is shorter than 8 octets, the agent will left
adjust and zero fill to 8 octets.
Unauthenticated interfaces need no authentication key, and simple
password authentication cannot use a key of more than 8 octets.
Note that the use of simplePassword authentication is NOT recommended
when there is concern regarding attack upon the OSPF system.
This authentication is only sufficient to protect against
accidental misconfigurations because it re-uses cleartext passwords.
[RFC-1704]
When read, tmnxOspfIfAuthKey always returns an Octet String of
length zero.
This object is valid only when tmnxOspfVersion has a value of
'version2'.rwobsolete OCTET STRING .1.3.6.1.4.1.6527.3.1.2.36.12.1.24 |
tmnxOspfIfStateThe OSPF Interface State.roobsolete Enumeration .1.3.6.1.4.1.6527.3.1.2.36.12.1.25 |
tmnxOspfIfLastEnabledTimeThe value of tmnxOspfIfLastEnabledTime indicates the sysUpTime
value when ospfIfAdminStat was last set to enabled (1) to
run the ospf on this interface.roobsolete TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.12.1.26 |
tmnxOspfIfOperMTUThe value of tmnxOspfIfOperMTU indicates the operational size
of the largest packet which can be sent/received on this OSPF
interface, specified in octets.
This size DOES include the underlying IP header length,
but not the underlying layer headers/trailers.roobsolete Integer32 .1.3.6.1.4.1.6527.3.1.2.36.12.1.27 |
tmnxOspfIfMetricValueThe value of tmnxOspfIfMetricValue indicates the metric value
this interface is using. The default value of the Metric is
(Reference Bandwidth / ifSpeed). The value of the reference
bandwidth is configured by the tmnxOspfReferenceBandwidth object.roobsolete Metric (OSPF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.12.1.28 |
tmnxOspfIfDRIdThe value of tmnxOspfIfDRId indicates the Router ID of the
Designated Router.roobsolete TmnxOspfRouterIdTc .1.3.6.1.4.1.6527.3.1.2.36.12.1.29 |
tmnxOspfIfDRIpAddrTypeThe value of tmnxOspfIfDRIpAddrType type indicates the IP address
type of tmnxOspfIfDRIpAddr. For IPv6 type addresses only addresses
with zone index are expected.roobsolete InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.36.12.1.30 |
tmnxOspfIfDRIpAddrThe value of tmnxOspfIfDRIpAddr indicates the IP address of
the Designated Router.roobsolete InetAddress .1.3.6.1.4.1.6527.3.1.2.36.12.1.31 |
tmnxOspfIfBDRIdThe value of tmnxOspfIfBDRId indicates the Router ID of the
Backup Designated Router.roobsolete TmnxOspfRouterIdTc .1.3.6.1.4.1.6527.3.1.2.36.12.1.32 |
tmnxOspfIfBDRIpAddrTypeThe value of tmnxOspfIfBDRIpAddrType indicates the IP address
type of the Backup Designated Router. For IPv6 type addresses
only addresses with zone index are expected.roobsolete InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.36.12.1.33 |
tmnxOspfIfBDRIpAddrThe value of tmnxOspfIfBDRIpAddr indicates the IP address of
the Backup Designated Router.roobsolete InetAddress .1.3.6.1.4.1.6527.3.1.2.36.12.1.34 |
tmnxOspfIfLinkLsaCountThe value of tmnxOspfIfLinkLsaCount indicates the total
number of Link-Scope link-state advertisements in this link's
link-state database.roobsolete Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.12.1.35 |
tmnxOspfIfLinkLsaCksumSumThe value of tmnxOspfIfLinkLsaCksumSum indicates the 32-bit
unsigned sum of the Link-Scope link-state advertisements' LS
checksums contained in this link's link-state database. The
sum can be used to determine if there has been a change in a
router's link-state database, and to compare the link state
database of two routers.roobsolete Integer32 .1.3.6.1.4.1.6527.3.1.2.36.12.1.36 |
tmnxOspfIfLinkUnkLsaCountThe value of tmnxOspfIfLinkUnkLsaCount indicates the total
number of unknown Link-Scope link-state advertisements in this
link's link-state database.roobsolete Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.12.1.37 |
tmnxOspfIfLinkUnkLsaCksumSumThe value of tmnxOspfIfLinkUnkLsaCksumSum indicates the 32-bit
unsigned sum of the unknown Link-Scope link-state advertisements'
LS checksums contained in this link's link-state database. The
sum can be used to determine if there has been a change in a
router's link-state database, and to compare the link-state
database of two routers.roobsolete Integer32 .1.3.6.1.4.1.6527.3.1.2.36.12.1.38 |
tmnxOspfIfMD5TransmitKeyIdThe value of tmnxOspfIfMD5TransmitKeyId indicates the index value
used to access the row entry in the tmnxOspfIfMD5KeyTable that
specifies the authentication type and key transmitted on this
OSPF interface. This object is valid only when tmnxOspfVersion
has the value 'version2'.
If tmnxOspfIfMD5TransmitKeyId has a value of 0, it means that no
keys are configured.roobsolete TmnxOspfIfMD5KeyId .1.3.6.1.4.1.6527.3.1.2.36.12.1.39 |
tmnxOspfIfLocalIpAddressTypeThe value of tmnxOspfIfLocalIpAddressType indicates the IP address
type of tmnxOspfIfLocalIpAddress. For IPv6 type addresses only
addresses with zone index are expected.roobsolete InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.36.12.1.40 |
tmnxOspfIfLocalIpAddressThe value of tmnxOspfIfLocalIpAddress indicates the IP address of
this OSPF local link interface.roobsolete InetAddress .1.3.6.1.4.1.6527.3.1.2.36.12.1.41 |
tmnxOspfIfMD5NumKeysThe value of tmnxOspfIfMD5NumKeys indicates the number of MD5 Key
entries for this OSPF interface.roobsolete Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.12.1.42 |
tmnxOspfIfTypeThe value of tmnxOspfIfType indicates the operational
OSPF interface type.roobsolete TmnxOspfIfTypeTc .1.3.6.1.4.1.6527.3.1.2.36.12.1.43 |
tmnxOspfIfEnableBfdThe value of tmnxOspfIfEnableBfd specifies whether Bi-directional
Forwarding Detection is enabled in this OSPF interface.
When the value is 'true', this interface can establish BFD sessions
and use BFD as a signalling mechanism. When it is 'false', it cannot
use BFD.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.12.1.44 |
tmnxOspfIfRemainDownOnFailThe value of tmnxOspfIfRemainDownOnFail specifies whether an OSPF
adjacency should go down when the BFD session to the peer goes
down.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.12.1.45 |
tmnxOspfIfTeMetricThe value of tmnxOspfIfTeMetric indicates the MPLS TE metric configured
for this interface. This metric is flooded out in the TE metric sub-tlv
in the OSPF TE LSAs.
Depending on the configuration, either the TE metric
value or the native OSPF metric value is used in CSPF computations.roobsolete Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.12.1.46 |
tmnxOspfIfTeStateThe value of tmnxOspfIfTeState indicates the MPLS interface TE status
from OSPF standpoint.roobsolete TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.12.1.47 |
tmnxOspfIfAdminGroupThe value of tmnxOspfIfAdminGroup indicates the bit-map inherited from
MPLS interface that identifies the admin groups to which this interface
belongs. If bit 'n' is set, then the interface belongs to the admin
group with value 'n'.roobsolete Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.12.1.48 |
tmnxOspfIfLdpSyncStateThe value of tmnxOspfIfLdpSyncState indicates if IGP-LDP
synchronization is enabled on this interface. tmnxOspfIfLdpSyncState
is derived from tmnxOspfLdpSyncAdminState and also whether it was
enabled at the IP layer from OSPF standpoint.roobsolete TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.12.1.49 |
tmnxOspfIfLdpSyncMaxMetricThe value of tmnxOspfIfLdpSyncMaxMetric indicates if OSPF
advertised maximum metric value for the interface, depending on
whether tmnxOspfIfLdpSyncState is enabled on this interface.roobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.12.1.50 |
tmnxOspfIfLdpSyncTimerStateThe value of tmnxOspfIfLdpSyncTimerState indicates the state of the
tmnxOspfIfLdpSyncTimeLeft on this OSPF interface.roobsolete Enumeration .1.3.6.1.4.1.6527.3.1.2.36.12.1.51 |
tmnxOspfIfLdpSyncTimeLeftThe value of tmnxOspfIfLdpSyncTimeLeft indicates the time left
before OSPF reverts back to advertising normal metric for this
interface. This is applicable only when tmnxOspfIfLdpSyncMaxMetric
is 'true'.roobsolete Unsigned32 (0|1..1800) UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.12.1.52 |
tmnxOspfIfInboundSANameThe value of tmnxOspfIfInboundSAName specifies the manually configured
IPsec Security Association name in case the Ospfv3 traffic on the
[interface] has to be authenticated.
This object is only valid when tmnxOspfVersion has a value of
'version3'.rwobsolete TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.12.1.53 |
tmnxOspfIfOutboundSANameThe value of tmnxOspfIfOutboundSAName specifies the manually configured
IPsec Security Association name in case the Ospfv3 traffic on the
[interface] has to be authenticated.
This object is only valid when tmnxOspfVersion has a value of
'version3'.rwobsolete TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.12.1.54 |
tmnxOspfIfOperInbSANameThe value of tmnxOspfIfOperInbSAName indicates the name of the
operational inbound manual IPsec Security Association, used for
authenticating inbound Ospfv3 traffic.roobsolete TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.12.1.55 |
tmnxOspfIfOperInbSANameTempThe value of tmnxOspfIfOperInbSANameTemp indicates the name of a
temporary operational inbound manual IPsec Security Association, used
for authenticating inbound Ospfv3 traffic.
This field can only contain a value when the key-rollover mechanism is
ongoing.roobsolete TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.12.1.56 |
tmnxOspfIfOperOutbSANameThe value of tmnxOspfIfOperOutbSAName indicates the name of the
operational outbound manual IPsec Security Association, used for
authenticating outbound Ospfv3 traffic. When the key-rollover mechanism
is ongoing, the value can temporarely be different from the value of
the tmnxOspfIfOutboundSAName field.roobsolete TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.12.1.57 |
tmnxOspfIfStatsTableThe tmnxOspfIfStatsTable provides an extension of the
tmnxOspfIfTable for statistics for an OSPF interface.
This table is obsoleted in release 9.0. It is replaced with
tmnxOspfNgIfStatsTableobsolete SEQUENCE OF TmnxOspfIfStatsEntry .1.3.6.1.4.1.6527.3.1.2.36.13 |
tmnxOspfIfStatsEntryEach row entry in the tmnxOspfIfStatsTable represents
additional columns for statistics for an OSPF interface.obsolete TmnxOspfIfStatsEntry .1.3.6.1.4.1.6527.3.1.2.36.13.1 |
tmnxOspfIfEventsThe value of tmnxOspfIfEvents indicates the number of times
this OSPF interface has changed its state, or an error has occurred.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.1 |
tmnxOspfIfTxPacketsThe value of tmnxOspfIfTxPackets indicates the total number of
OSPF packets transmitted on this interface since tmnxOspfAdminState
was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.2 |
tmnxOspfIfTxHellosThe value of tmnxOspfIfTxHellos indicates the total number
of OSPF Hello packets transmitted on this interface since
tmnxOspfAdminState was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.3 |
tmnxOspfIfTxDBDsThe value of tmnxOspfIfTxDBDs indicates the total number
of OSPF Database Description packets transmitted on this
interface since tmnxOspfAdminState was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.4 |
tmnxOspfIfTxLSRsThe value of tmnxOspfIfTxLSRs indicates the total number
of OSPF Link State Requests (LSRs)transmitted on this
interface since tmnxOspfAdminState was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.5 |
tmnxOspfIfTxLSUsThe value of tmnxOspfIfTxLSUs indicates the total number
of OSPF Link State Updates (LSUs) transmitted on this
interface since tmnxOspfAdminState was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.6 |
tmnxOspfIfTxLSAcksThe value of tmnxOspfIfTxLSAcks indicates the total number
of OSPF Link State Acknowledgements transmitted on this
interface since tmnxOspfAdminState was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.7 |
tmnxOspfIfRxPacketsThe value of tmnxOspfIfRxPackets indicates the total number of
OSPF packets received on this interface since tmnxOspfAdminState was
last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.8 |
tmnxOspfIfRxHellosThe value of tmnxOspfIfRxHellos indicates the total number of
OSPF Hello packets received on this interface since tmnxOspfAdminState
was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.9 |
tmnxOspfIfRxDBDsThe value of tmnxOspfIfRxDBDs indicates the total number of
OSPF Database Description packets received on this interface since
tmnxOspfAdminState was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.10 |
tmnxOspfIfRxLSRsThe value of tmnxOspfIfRxLSRs indicates the total number of
Link State Requests (LSRs) received on this interface since
tmnxOspfAdminState was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.11 |
tmnxOspfIfRxLSUsThe value of tmnxOspfIfRxLSUs indicates the total number of
Link State Updates (LSUs) received on this interface since
tmnxOspfAdminState was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.12 |
tmnxOspfIfRxLSAcksThe value of tmnxOspfIfRxLSAcks indicates the total number of
Link State Acknowledgements received on this interface since
tmnxOspfAdminState was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.13 |
tmnxOspfIfDiscardPacketsThe value of tmnxOspfIfDiscardPackets indicates the total number
of OSPF packets discarded on this interface since tmnxOspfAdminState
was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.14 |
tmnxOspfIfRetransmitOutsThe value of tmnxOspfIfRetransmitOuts indicates the total number
of OSPF Retransmits sent on this interface since tmnxOspfAdminState was
last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.15 |
tmnxOspfIfBadVersionsThe value of tmnxOspfIfBadVersions indicates the total number of
OSPF packets received with bad OSPF version numbers since
tmnxOspfAdminState was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.16 |
tmnxOspfIfBadNetworksThe value of tmnxOspfIfBadNetworks indicates the total number of
OSPF packets received with invalid network or mask since
tmnxOspfAdminState was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.17 |
tmnxOspfIfBadVirtualLinksThe value of tmnxOspfIfBadVirtualLinks indicates the total number
of OSPF packets received on this interface that are destined to a
virtual link that does not exist since tmnxOspfAdminState was last set
to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.18 |
tmnxOspfIfBadAreasThe value of tmnxOspfIfBadAreas indicates the total number of OSPF
packets received with an area mismatch
since tmnxOspfAdminState was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.19 |
tmnxOspfIfBadDstAddrsThe value of tmnxOspfIfBadDstAddrs indicates the total number
of OSPF packets received with the incorrect IP destination address
since tmnxOspfAdminState was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.20 |
tmnxOspfIfBadNeighborsThe value of tmnxOspfIfBadNeighbors indicates the total number
of OSPF packets received where the neighbor
information does not match the information this router has
for the neighbor since tmnxOspfAdminState was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.21 |
tmnxOspfIfBadPacketTypesThe value of tmnxOspfIfBadPacketTypes indicates the total number
of OSPF packets received with an invalid OSPF packet type since
tmnxOspfAdminState was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.22 |
tmnxOspfIfNeighborCountThe value of tmnxOspfIfNeighborCount indicates the total number of
OSPF neighbors adjacent on this interface, in a state of INIT or
greater, since tmnxOspfAdminState was last set to 'enabled'.roobsolete Integer32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.23 |
tmnxOspfIfLastEventTimeThe value of tmnxOspfIfLastEventTime indicates the value of
sysUpTime when an event was last associated with this OSPF
interface.roobsolete TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.13.1.24 |
tmnxOspfIfBadLengthsThe value of tmnxOspfIfBadLengths indicates the total number
of OSPF packets received on this interface with a total length
not equal to the length given in the packet itself since
tmnxOspfAdminState was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.25 |
tmnxOspfIfBadHelloIntervalsThe value of tmnxOspfIfBadHelloIntervals indicates the
total number of OSPF packets received where the hello interval
given in packet was not equal to that configured on this interface
since tmnxOspfAdminState was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.26 |
tmnxOspfIfBadDeadIntervalsThe value of tmnxOspfIfBadDeadIntervals indicates the
total number of OSPF packets received where the dead interval
given in the packet was not equal to that configured on this
interface since tmnxOspfAdminState was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.27 |
tmnxOspfIfBadOptionsThe value of tmnxOspfIfBadOptions indicates the total number
of OSPF packets received with an option that does not match
those configured for this interface or area since
tmnxOspfAdminState was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.28 |
tmnxOspfIfRxBadChecksumsThe value of tmnxOspfIfRxBadChecksums indicates the count
of LSAs received with bad checksums.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.29 |
tmnxOspfIfBadAuthTypesThe value of tmnxOspfIfBadAuthTypes indicates the total
number of OSPF packets received with an invalid authorization
type since tmnxOspfAdminState was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.30 |
tmnxOspfIfAuthFailuresThe value of tmnxOspfIfAuthFailures indicates the total
number of OSPF packets received with an invalid authorization
key since tmnxOspfAdminState was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.13.1.31 |
tmnxOspfVirtIfTableThe tmnxOspfVirtIfTable contains information about this router's
virtual interfaces. SEQUENCE OF TmnxOspfVirtIfEntry .1.3.6.1.4.1.6527.3.1.2.36.14 |
tmnxOspfVirtIfEntryThe tmnxOspfVirtIfEntry contains information about a single
Virtual Interface. TmnxOspfVirtIfEntry .1.3.6.1.4.1.6527.3.1.2.36.14.1 |
tmnxOspfVirtIfAreaIdThe value of tmnxOspfVirtIfAreaId specifies the Transit Area
that the Virtual Link traverses. By definition, this is not
Area 0. TmnxOspfAreaIdTc .1.3.6.1.4.1.6527.3.1.2.36.14.1.1 |
tmnxOspfVirtIfNeighborThe value of tmnxOspfVirtIfNeighbor specifies the Router ID of
the Virtual Neighbor. TmnxOspfRouterIdTc .1.3.6.1.4.1.6527.3.1.2.36.14.1.2 |
tmnxOspfVirtIfStatusThe value of tmnxOspfVirtIfStatus controls creation and deletion
or a row entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.14.1.3 |
tmnxOspfVirtIfLastChangedThe value of tmnxOspfVirtIfLastChanged indicates the sysUpTime
when a configurable object in this row was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.14.1.4 |
tmnxOspfVirtIfIndexThe value of tmnxOspfVirtIfIndex specifies the interface index
assigned to this OSPF virtual interface. It is advertised in
Hello's sent over the virtal link and in the router's router-LSAs.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.14.1.5 |
tmnxOspfVirtIfInstIdThe value of tmnxOspfVirtIfInstId specifies the interface instance
ID to be used for the virtual interface. This ID has local link
significance only.rw TmnxOspfIfInstIdTc .1.3.6.1.4.1.6527.3.1.2.36.14.1.6 |
tmnxOspfVirtIfAdminStatThe value of tmnxOspfVirtIfAdminStat specifies the desired
administrative state of OSPF on this virtual interface.rw Status (OSPF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.14.1.7 |
tmnxOspfVirtIfTransitDelayThe value of tmnxOspfVirtIfTransitDelay specifies the estimated
number of seconds it takes to transmit a link-state update packet
over this interface.rw TmnxOspfUpToRefreshIntervalTc .1.3.6.1.4.1.6527.3.1.2.36.14.1.8 |
tmnxOspfVirtIfRetransIntervalThe value of tmnxOspfVirtIfRetransInterval specifies the number
of seconds between link-state advertisement retransmissions, for
adjacencies belonging to this interface. This value is also used
when retransmitting database description and link-state request
packets. This value should be well over the expected round-trip
time.rw TmnxOspfUpToRefreshIntervalTc .1.3.6.1.4.1.6527.3.1.2.36.14.1.9 |
tmnxOspfVirtIfHelloIntervalThe value of tmnxOspfVirtIfHelloInterval specifies the length of
time, in seconds, between the Hello packets that the router sends
on the interface. This value MUST be the same for the virtual
neighbor.rw HelloRange UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.14.1.10 |
tmnxOspfVirtIfRtrDeadIntervalThe value of tmnxOspfVirtIfRtrDeadInterval specifies the number
of seconds that a router's Hello packets have not been seen before
its neighbors declare the router down. This should be some multiple
of the Hello interval. This value MUST be the same for the virtual
neighbor.rw TmnxOspfDeadIntRangeTc UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.14.1.11 |
tmnxOspfVirtIfAuthTypeThe value of tmnxOspfVirtIfAuthType specifies the authentication
type to use for an interface.
Note that this object can be used to engage in significant attacks
against an OSPF router.rw TmnxOspfAuthenticationType .1.3.6.1.4.1.6527.3.1.2.36.14.1.12 |
tmnxOspfVirtIfAuthKeyThe value of tmnxOspfVirtIfAuthKey specifies the authentication key
string. The cleartext password is used as an OSPF Authentication
key when simplePassword security is enabled. This object does not
access any OSPF Cryptographic (e.g. MD5) Authentication Key under
any circumstance.
If the key length is shorter than 8 octets, the agent will left
adjust and zero fill to 8 octets.
Unauthenticated interfaces need no authentication key, and simple
password authentication cannot use a key of more than 8 octets.
Note that the use of simplePassword authentication is NOT recommended
when there is concern regarding attack upon the OSPF system.
This authentication is only sufficient to protect against
accidental misconfigurations because it re-uses cleartext passwords.
[RFC-1704]
When read, tmnxOspfVirtIfAuthKey always returns an Octet String of
length zero.
This object is valid only when tmnxOspfVersion has a value of
'version2'.rw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.36.14.1.13 |
tmnxOspfVirtIfStateThe value of tmnxOspfVirtIfState indicates the operational state
of this virtual interface.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.36.14.1.14 |
tmnxOspfVirtIfLastEnabledTimeThe value of tmnxOspfVirtIfLastEnabledTime indicates the sysUpTime
value when this entry row entry was enabled.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.14.1.15 |
tmnxOspfVirtIfCostThe value of tmnxOspfVirtIfCost indicates the OSPF virtual
interface cost represents the cost to traverse the transit area
to the adjacent router. If multiple routes are
available the lowest cost link will be used to maintain the
adjacency and route traffic across the transit area.ro Metric (OSPF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.14.1.16 |
tmnxOspfVirtIfLinkLsaCountThe value of tmnxOspfVirtIfLinkLsaCount indicates the total
number of Link-Scope link-state advertisements in this virtual
link's link-state database.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.14.1.17 |
tmnxOspfVirtIfLinkLsaCksumSumThe value of tmnxOspfVirtIfLinkLsaCksumSum indicates the 32-bit
unsigned sum of the Link-Scope link-state advertisements' LS
checksums contained in this virtual link's link-state database.
The sum can be used to determine if there has been a change in a
router's link-state database, and to compare the link-state database
of two routers.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.36.14.1.18 |
tmnxOspfVirtIfLinkUnkLsaCountThe value of tmnxOspfVirtIfLinkUnkLsaCount indicates the total
number of unknown Link-Scope link-state advertisements in this
virtual link's link-state database.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.14.1.19 |
tmnxOspfVirtIfLinkUnkLsaCksumSumThe value of tmnxOspfVirtIfLinkUnkLsaCksumSum indicates the
32-bit unsigned sum of the unknown Link-Scope link-state
advertisements' LS checksums contained in this virtual link's
link-state database. The sum can be used to determine if there
has been a change in a router's link state database, and to
compare the link-state database of two routers.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.36.14.1.20 |
tmnxOspfVirtIfMD5TransmitKeyIdThe value of tmnxOspfVirtIfMD5TransmitKeyId indicates the index value
used to access the row entry in the tmnxOspfVirtIfMD5KeyTable that
specifies the authentication type and key transmitted on this
OSPF virtual interface. This object is valid only when
tmnxOspfVersion has the value 'version2'.
If tmnxOspfVirtIfMD5TransmitKeyId has a value of 0, it means that no
keys are configured.ro TmnxOspfIfMD5KeyId .1.3.6.1.4.1.6527.3.1.2.36.14.1.21 |
tmnxOspfVirtIfLocalIpAddrTypeThe value of tmnxOspfVirtIfLocalIpAddrType type indicates the
IP address type of tmnxOspfVirtIfLocalIpAddress. For IPv6 type
addresses only addresses without zone index are expected.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.36.14.1.22 |
tmnxOspfVirtIfLocalIpAddressThe value of tmnxOspfVirtIfLocalIpAddress indicates the IP address
of the local egress interface that is used to maintain the
adjacency to reach this virtual neighbor.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.36.14.1.23 |
tmnxOspfVirtIfMD5NumKeysThe value of tmnxOspfVirtIfMD5NumKeys indicates the number of MD5 Key
entries for this OSPF virtual interface.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.14.1.24 |
tmnxOspfVirtIfInboundSANameThe value of tmnxOspfVirtIfInboundSAName specifies the manually
configured IPsec Security Association name in case the Ospfv3 traffic
on the [virtual link] has to be authenticated.
This object is only valid when tmnxOspfVersion has a value of
'version3'.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.14.1.25 |
tmnxOspfVirtIfOutboundSANameThe value of tmnxOspfVirtIfOutboundSAName specifies the manually
configured IPsec Security Association name in case the Ospfv3 traffic
on the [virtual link] has to be authenticated.
This object is only valid when tmnxOspfVersion has a value of
'version3'.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.14.1.26 |
tmnxOspfVirtIfOperInbSANameThe value of tmnxOspfVirtIfOperInbSAName indicates the name of the
operational inbound manual IPsec Security Association, used for
authenticating inbound Ospfv3 traffic.ro TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.14.1.27 |
tmnxOspfVirtIfOperInbSANameTempThe value of tmnxOspfVirtIfOperInbSANameTemp indicates the name of a
temporary operational inbound manual IPsec Security Association, used
for authenticating inbound Ospfv3 traffic.
This field can only contain a value when the key-rollover mechanism is
ongoing.ro TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.14.1.28 |
tmnxOspfVirtIfOperOutbSANameThe value of tmnxOspfVirtIfOperOutbSAName indicates the name of the
operational outbound manual IPsec Security Association, used for
authenticating outbound Ospfv3 traffic. When the key-rollover mechanism
is ongoing, the value can temporarely be different from the value of
the tmnxOspfVirtIfOutboundSAName field.ro TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.14.1.29 |
tmnxOspfVirtIfStatsTableThe tmnxOspfVirtIfStatsTable provides an extension of the
tmnxOspfVirtIfTable for statistics for an OSPF virtual interface. SEQUENCE OF TmnxOspfVirtIfStatsEntry .1.3.6.1.4.1.6527.3.1.2.36.15 |
tmnxOspfVirtIfStatsEntryEach row entry in the tmnxOspfVirtIfStatsTable represents
additional columns for statistics for an OSPF virtual interface. TmnxOspfVirtIfStatsEntry .1.3.6.1.4.1.6527.3.1.2.36.15.1 |
tmnxOspfVirtIfEventsThe value of tmnxOspfVirtIfEvents indicates the number of
state changes or error events on this Virtual Linkro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.1 |
tmnxOspfVirtIfTxPacketsThe value of tmnxOspfVirtIfTxPackets indicates the total number of
OSPF packets transmitted on this virtual interface since it was
created.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.2 |
tmnxOspfVirtIfTxHellosThe value of tmnxOspfVirtIfTxHellos indicates the total number of
OSPF Hello packets transmitted on this virtual interface since it
was created.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.3 |
tmnxOspfVirtIfTxDBDsThe value of tmnxOspfVirtIfTxDBDs indicates the total number of
OSPF Database Description packets transmitted on this virtual
interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.4 |
tmnxOspfVirtIfTxLSRsThe value of tmnxOspfVirtIfTxLSRs indicates the total number of
OSPF Link State Requests (LSRs) transmitted on this virtual
interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.5 |
tmnxOspfVirtIfTxLSUsThe value of tmnxOspfVirtIfTxLSUs indicates the total number of
OSPF Link State Updates (LSUs) transmitted on this virtual
interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.6 |
tmnxOspfVirtIfTxLSAcksThe value of tmnxOspfVirtIfTxLSAcks indicates the total number of
OSPF Link State Acknowledgements transmitted on this virtual
interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.7 |
tmnxOspfVirtIfRxPacketsThe value of tmnxOspfVirtIfRxPackets indicates the total number of
OSPF packets received on this virtual interface since it was
created.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.8 |
tmnxOspfVirtIfRxHellosThe value of tmnxOspfVirtIfRxHellos indicates the total number of
OSPF Hello packets received on this virtual interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.9 |
tmnxOspfVirtIfRxDBDsThe value of tmnxOspfVirtIfRxDBDs indicates the total number of
OSPF Database Description packets received on this virtual
interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.10 |
tmnxOspfVirtIfRxLSRsThe value of tmnxOspfVirtIfRxLSRs indicates the total number of
OSPF Link State Requests (LSRs) received on this virtual interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.11 |
tmnxOspfVirtIfRxLSUsThe value of tmnxOspfVirtIfRxLSUs indicates the total number of
OSPF Link State Updates (LSUs) received on this virtual interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.12 |
tmnxOspfVirtIfRxLSAcksThe value of tmnxOspfVirtIfRxLSAcks indicates the total number of
Link State Acknowledgements received on this virtual interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.13 |
tmnxOspfVirtIfDiscardPacketsThe value of tmnxOspfVirtIfDiscardPackets indicates the total
number of OSPF packets discarded on this virtual
interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.14 |
tmnxOspfVirtIfRetransmitOutsThe value of tmnxOspfVirtIfRetransmitOuts indicates the total
number of OSPF packets retransmitted on this virtual
interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.15 |
tmnxOspfVirtIfBadVersionsThe value of tmnxOspfVirtIfBadVersions indicates the total number
of OSPF packets received on this virtual interface
with invalid OSPF version numbers.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.16 |
tmnxOspfVirtIfBadNetworksThe value of tmnxOspfVirtIfBadNetworks indicates the total number
of OSPF packets received on this virtual
interface with invalid network or mask fields.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.17 |
tmnxOspfVirtIfBadAreasThe value of tmnxOspfVirtIfBadAreas indicates the total number
of OSPF packets received on this virtual interface with area
mismatches.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.18 |
tmnxOspfVirtIfBadDstAddrsThe value of tmnxOspfVirtIfBadDstAddrs indicates the total number
of OSPF packets received on this virtual
interface with invalid destination IP address.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.19 |
tmnxOspfVirtIfBadNeighborsThe value of tmnxOspfVirtIfBadNeighbors indicates the total
number of OSPF packets received where the neighbor information
does not match the configuration this router has
for the neighbor.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.20 |
tmnxOspfVirtIfBadPacketTypesThe value of tmnxOspfVirtIfBadPacketTypes indicates the total
number of OSPF packets received on this virtual interface with
invalid OSPF packet types.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.21 |
tmnxOspfVirtIfLastEventTimeThe value of tmnxOspfVirtIfLastEventTime indicates the value of
sysUpTime when an event was last associated with this OSPF
virtual interface.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.15.1.22 |
tmnxOspfVirtIfBadLengthsThe value of tmnxOspfVirtIfBadLengths indicates the total number
of OSPF packets received on this virtual interface with a total
length not equal to the length given in the packet itself since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.23 |
tmnxOspfVirtIfBadHelloIntervlsThe value of tmnxOspfVirtIfBadHelloIntervls indicates the total
number of OSPF packets received where the hello interval given
in packet was not equal to that configured on this virtual
interface since tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.24 |
tmnxOspfVirtIfBadDeadIntervalsThe value of tmnxOspfVirtIfBadDeadIntervals indicates the total
number of OSPF packets received where the dead interval given in
the packet was not equal to that configured on this virtual
interface since tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.25 |
tmnxOspfVirtIfBadOptionsThe value of tmnxOspfVirtIfBadOptions indicates the total number
of OSPF packets received with an option that does not match those
configured for this virtual interface or transit-area since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.26 |
tmnxOspfVirtIfRxBadChecksumsThe value of tmnxOspfVirtIfRxBadChecksums indicates the count of
LSAs received with bad checksums.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.27 |
tmnxOspfVirtIfBadAuthTypesThe value of tmnxOspfVirtIfBadAuthTypes indicates the total
number of OSPF packets received on this virtual
interface with invalid authentication types.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.28 |
tmnxOspfVirtIfAuthFailuresThe value of tmnxOspfVirtIfAuthFailures indicates the total
number of OSPF packets received on this virtual
interface with invalid authentication keys.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.15.1.29 |
tmnxOspfNbrTableThe tmnxOspfNbrTable contains information about non-virtual
neighbors.
This table is obsoleted in release 9.0. It is replaced with
tmnxOspfNgNbrTable.obsolete SEQUENCE OF TmnxOspfNbrEntry .1.3.6.1.4.1.6527.3.1.2.36.16 |
tmnxOspfNbrEntryThe tmnxOspfNbrEntry contains information regarding a single
non-virtual neighbor.obsolete TmnxOspfNbrEntry .1.3.6.1.4.1.6527.3.1.2.36.16.1 |
tmnxOspfNbrIfIndexThe value of tmnxOspfNbrIfIndex specifies the local link ID of
the link over which the neighbor can be reached.obsolete InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.16.1.1 |
tmnxOspfNbrIfInstIdThe value of tmnxOspfNbrIfInstId specifies the interface instance
over which the neighbor can be reached. This ID has local link
significance only.obsolete TmnxOspfIfInstIdTc .1.3.6.1.4.1.6527.3.1.2.36.16.1.2 |
tmnxOspfNbrRtrIdThe value of tmnxOspfNbrRtrId specifies a 32-bit integer uniquely
identifying the neighboring router in the Autonomous System.obsolete TmnxOspfRouterIdTc .1.3.6.1.4.1.6527.3.1.2.36.16.1.3 |
tmnxOspfNbrAddressTypeThe value of tmnxOspfNbrAddressType indicates the address type of
tmnxOspfNbrAddress. For addresses of IPv6 type only addresses
with zone index are expected.roobsolete InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.36.16.1.4 |
tmnxOspfNbrAddressThe value of tmnxOspfNbrAddress indicates the IP address of the
neighbor associated with the local link.roobsolete InetAddress .1.3.6.1.4.1.6527.3.1.2.36.16.1.5 |
tmnxOspfNbrOptionsThe value of tmnxOspfNbrOptions indicates a Bit Mask corresponding
to the neighbor's options field.roobsolete Integer32 .1.3.6.1.4.1.6527.3.1.2.36.16.1.6 |
tmnxOspfNbrPriorityThe value of tmnxOspfNbrPriority indicates the priority of this
neighbor in the designated router election algorithm. The value
0 signifies that the neighbor is not eligible to become the
designated router on this particular network.roobsolete DesignatedRouterPriority (OSPF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.16.1.7 |
tmnxOspfNbrStateThe value of tmnxOspfNbrState indicates the State of the
relationship with this Neighbor.roobsolete Enumeration .1.3.6.1.4.1.6527.3.1.2.36.16.1.8 |
tmnxOspfNbrHelloSuppressedThe value of tmnxOspfNbrHelloSuppressed indicates whether Hellos
are being suppressed to the neighbor.roobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.16.1.9 |
tmnxOspfNbrIfIdThe value of tmnxOspfNbrIfId indicates the interface ID that the
neighbor advertises in its Hello Packets on this link, that is, the
neighbor's local interface index.roobsolete InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.16.1.10 |
tmnxOspfNbrRestartHelperStatusThe value of tmnxOspfNbrRestartHelperStatus indicates whether
the router is acting as a Graceful restart helper for the neighbor.roobsolete Enumeration .1.3.6.1.4.1.6527.3.1.2.36.16.1.11 |
tmnxOspfNbrRestartHelperAgeThe value of tmnxOspfNbrRestartHelperAge indicates the remaining
time in the current OSPF Graceful restart interval, if the router
is acting as a restart helper for the neighbor.roobsolete TmnxOspfUpToRefreshIntervalTc UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.16.1.12 |
tmnxOspfNbrRestartHelperExitRcThe value of tmnxOspfNbrRestartHelperExitRc indicates the outcome
of the last attempt at acting as a Graceful restart helper for the
neighbor.
none No restart has yet been attempted.
inProgress A restart attempt is currently underway.
completed The last restart completed successfully.
timedOut The last restart timed out.
topologyChanged The last restart was aborted due to
a topology change.roobsolete Enumeration .1.3.6.1.4.1.6527.3.1.2.36.16.1.13 |
tmnxOspfNbrUpTimeThe value of tmnxOspfNbrUpTime indicates the uninterrupted time,
in hundredths of seconds, the adjacency to this neighbour
has been up.roobsolete TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.16.1.14 |
tmnxOspfNbrLastEventTimeThe value of tmnxOspfNbrLastEventTime indicates the value of
sysUpTime when the last event occurred that affected the adjacency
to the neighbour.roobsolete TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.16.1.15 |
tmnxOspfNbrDeadTimeOutstandingThe value of tmnxOspfNbrDeadTimeOutstanding indicates the amount
of time in seconds until the dead-router interval expires. Normally,
this value should not be significantly smaller than the configured
dead router interval minus one hello interval.roobsolete Unsigned32 (0..'7FFFFFFF'h) UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.16.1.16 |
tmnxOspfNbrLastRestartTimeThe value of tmnxOspfNbrLastRestartTime indicates the last time the
neighbor attempted restart.roobsolete TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.16.1.17 |
tmnxOspfNbrRestartReasonThe value of tmnxOspfNbrRestartReason indicates the OSPF
neighbor's graceful restart reason.roobsolete TmnxOspfRestartReasonTc .1.3.6.1.4.1.6527.3.1.2.36.16.1.18 |
tmnxOspfNbrBfdTrackingThe value of tmnxOspfNbrBfdTracking indicates whether a BFD
session is being maintained to track the forwarding path to
this neighbor or not.roobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.16.1.19 |
tmnxOspfNbrDrIdThe value of tmnxOspfNbrDrId indicates the DR value advertised
in the HELLO packets received from the OSPF neighbor.
If it is not a broadcast interface tmnxOspfNbrDrId will be zero.roobsolete TmnxOspfRouterIdTc .1.3.6.1.4.1.6527.3.1.2.36.16.1.20 |
tmnxOspfNbrBdrIdThe value of tmnxOspfNbrBdrId indicates the BDR value advertised
in the HELLO packets received from the OSPF neighbor.
If it is not a broadcast interface tmnxOspfNbrBdrId will be zero.roobsolete TmnxOspfRouterIdTc .1.3.6.1.4.1.6527.3.1.2.36.16.1.21 |
tmnxOspfNbrStatsTableThe tmnxOspfNbrStatsTable provides an extension of the
tmnxOspfNbrTable for statistics for an OSPF neighbor.
This table is obsoleted in release 9.0. It is replaced with
tmnxOspfNgNbrStatsTable.obsolete SEQUENCE OF TmnxOspfNbrStatsEntry .1.3.6.1.4.1.6527.3.1.2.36.17 |
tmnxOspfNbrStatsEntryEach row entry in the tmnxOspfNbrStatsTable represents
additional columns for statistics for an OSPF neighbor.obsolete TmnxOspfNbrStatsEntry .1.3.6.1.4.1.6527.3.1.2.36.17.1 |
tmnxOspfNbrEventsThe value of tmnxOspfNbrEvents indicates the number of times
this neighbor relationship has changed state, or an error has
occurred.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.17.1.1 |
tmnxOspfNbrLsRetransQLenThe value of tmnxOspfNbrLsRetransQLen indicates the current
length of the retransmission queue.roobsolete Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.17.1.2 |
tmnxOspfNbrBadNbrStatesThe value of tmnxOspfNbrBadNbrStates indicates the total number
of OSPF packets received when the neighbor state was not
expecting to receive this packet type since tmnxOspfAdminState
was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.17.1.3 |
tmnxOspfNbrLsaInstallFailedThe value of tmnxOspfNbrLsaInstallFailed indicates the total number
of times an LSA could not be installed into the LSDB due to
a resource allocation issue since tmnxOspfAdminState was last set
to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.17.1.4 |
tmnxOspfNbrBadSeqNumsThe value of tmnxOspfNbrBadSeqNums indicates the total number
of times when a database description packet was received with a
sequence number mismatch since tmnxOspfAdminState was last
set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.17.1.5 |
tmnxOspfNbrBadMTUsThe value of tmnxOspfNbrBadMTUs indicates the total number of times
when the MTU in a received database description packet was
larger than the MTU of the receiving interface since
tmnxOspfAdminState was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.17.1.6 |
tmnxOspfNbrBadPacketsThe value of tmnxOspfNbrBadPackets indicates the total number
of times when an LS update was received with an illegal LS type or an
option mismatch since tmnxOspfAdminState was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.17.1.7 |
tmnxOspfNbrLsaNotInLsdbsThe value of tmnxOspfNbrLsaNotInLsdbs indicates the total number of
times when an LS request was received for an LSA not installed in the
LSDB of this router since tmnxOspfAdminState was last set to
'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.17.1.8 |
tmnxOspfNbrOptionMismatchesThe value of tmnxOspfNbrOptionMismatches indicates the total
number of times when a LS update was received with an option mismatch
since tmnxOspfAdminState was last set to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.17.1.9 |
tmnxOspfNbrDuplicatesThe value of tmnxOspfNbrDuplicates indicates the total number
of times when a duplicate database description packet was received
during the Exchange state since tmnxOspfAdminState was last set
to 'enabled'.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.17.1.10 |
tmnxOspfNbrNumRestartsThe value of tmnxOspfNbrNumRestarts indicates the number of times
the neighbor has attempted restart.roobsolete Counter32 .1.3.6.1.4.1.6527.3.1.2.36.17.1.11 |
tmnxOspfCfgNbrTableThe tmnxOspfCfgNbrTable contains information about configured
non-virtual neighbors and neighbors dynamically discovered
by lower-level protocols such as Inverse Neighbor Discovery. SEQUENCE OF TmnxOspfCfgNbrEntry .1.3.6.1.4.1.6527.3.1.2.36.18 |
tmnxOspfCfgNbrEntryThe tmnxOspfCfgNbrEntry contains information regarding a single
configured neighbor or neighbor discovered by lower-level
protocols such as Inverse Neighbor Discovery. TmnxOspfCfgNbrEntry .1.3.6.1.4.1.6527.3.1.2.36.18.1 |
tmnxOspfCfgNbrIfIndexThe value of tmnxOspfCfgNbrIfIndex specifies the local link ID of
the link over which the neighbor can be reached. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.18.1.1 |
tmnxOspfCfgNbrIfInstIdThe value of tmnxOspfCfgNbrIfInstId specifies the interface
instance over which the neighbor can be reached. This ID has
local link significance only. TmnxOspfIfInstIdTc .1.3.6.1.4.1.6527.3.1.2.36.18.1.2 |
tmnxOspfCfgNbrAddressTypeThe value of tmnxOspfCfgNbrAddressType specifies the address type
of tmnxOspfCfgNbrAddress. For IPv6 type addresses only addresses
with zone index are expected. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.36.18.1.3 |
tmnxOspfCfgNbrAddressThe value of tmnxOspfCfgNbrAddress specifies the IP address of
the neighbor associated with the local link. InetAddress .1.3.6.1.4.1.6527.3.1.2.36.18.1.4 |
tmnxOspfCfgNbrStatusThe value of tmnxOspfCfgNbrStatus controls creation and deletion
of row entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.18.1.5 |
tmnxOspfCfgNbrStorageTypeThe value of tmnxOspfCfgNbrStorageType specifies the storage type
for this conceptual row. Conceptual rows having the value
'permanent' need not allow write-access to any columnar objects
in the row. Manually configured entries will have a storage type
of nonVolatile while entries dynamically created as a result of a
lower-level protocol such as Inverse Neighbor Discovery will have a
storage type of volatile.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.18.1.6 |
tmnxOspfCfgNbrLastChangedThe value of tmnxOspfCfgNbrLastChanged indicates the sysUpTime
when a configurable object in this row was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.18.1.7 |
tmnxOspfCfgNbrPriorityThe value of tmnxOspfCfgNbrPriority specifies the priority of
this neighbor in the designated router election algorithm. The
value 0 signifies that the neighbor is not eligible to become the
designated router on this particular network.rw DesignatedRouterPriority (OSPF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.18.1.8 |
tmnxOspfCfgNbrRtrIdThe value of tmnxOspfCfgNbrRtrId indicates a 32-bit integer
uniquely identifying the neighboring router in the Autonomous
System. A value of 0 is returned until a Hello is received
from the configured neighbor.ro TmnxOspfRouterIdTc .1.3.6.1.4.1.6527.3.1.2.36.18.1.9 |
tmnxOspfCfgNbrStateThe value of tmnxOspfCfgNbrState indicates the State of the
relationship with this Neighbor.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.36.18.1.10 |
tmnxOspfVirtNbrTableThe tmnxOspfVirtNbrTable contains virtual neighbors information. SEQUENCE OF TmnxOspfVirtNbrEntry .1.3.6.1.4.1.6527.3.1.2.36.19 |
tmnxOspfVirtNbrEntryThe tmnxOspfVirtNbrEntry contains information for a specific
Virtual neighbor. TmnxOspfVirtNbrEntry .1.3.6.1.4.1.6527.3.1.2.36.19.1 |
tmnxOspfVirtNbrAreaThe value of tmnxOspfVirtNbrArea specifies the Transit Area
Identifier. TmnxOspfAreaIdTc .1.3.6.1.4.1.6527.3.1.2.36.19.1.1 |
tmnxOspfVirtNbrRtrIdThe value of tmnxOspfVirtNbrRtrId specifies a 32-bit integer
uniquely identifying the neighboring router in the Autonomous
System. TmnxOspfRouterIdTc .1.3.6.1.4.1.6527.3.1.2.36.19.1.2 |
tmnxOspfVirtNbrIfIndexThe value of tmnxOspfVirtNbrIfIndex indicates the local interface
ID for the virtual link over which the neighbor can be reached.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.19.1.3 |
tmnxOspfVirtNbrIfInstIdThe value of tmnxOspfVirtNbrIfInstId indicates the interface
instance for the virtual link over which the neighbor can be
reached.ro TmnxOspfIfInstIdTc .1.3.6.1.4.1.6527.3.1.2.36.19.1.4 |
tmnxOspfVirtNbrAddressTypeThe value of tmnxOspfVirtNbrAddressType indicates the address
type of tmnxOspfVirtNbrAddress. For IPv6 address type only
addresses without zone index are expected.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.36.19.1.5 |
tmnxOspfVirtNbrAddressThe value of tmnxOspfVirtNbrAddress indicates the IP address
advertised by this Virtual Neighbor. It must be a Global scope
address.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.36.19.1.6 |
tmnxOspfVirtNbrOptionsThe value of tmnxOspfVirtNbrOptions indicates a Bit Mask
corresponding to the neighbor's options field.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.36.19.1.7 |
tmnxOspfVirtNbrStateThe value of tmnxOspfVirtNbrState indicates the state of the
Virtual Neighbor Relationship.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.36.19.1.8 |
tmnxOspfVirtNbrHelloSuppressedThe value of tmnxOspfVirtNbrHelloSuppressed indicates whether
Hellos are being suppressed to the neighborro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.19.1.9 |
tmnxOspfVirtNbrIfIdThe value of tmnxOspfVirtNbrIfId indicates the interface ID that
the neighbor advertises in its Hello Packets on this virtual link,
that is, the neighbor's local interface ID.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.19.1.10 |
tmnxOspfVirtNbrRestartHelperStatusThe value of tmnxOspfVirtNbrRestartHelperStatus indicates whether
the router is acting as a Graceful restart helper for the neighbor.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.36.19.1.11 |
tmnxOspfVirtNbrRestartHelperAgeThe value of tmnxOspfVirtNbrRestartHelperAge indicates the
remaining time in current OSPF Graceful restart interval,
if the router is acting as a restart helper for the neighbor.ro TmnxOspfUpToRefreshIntervalTc UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.19.1.12 |
tmnxOspfVirtNbrRestartHelperExitRcThe value of tmnxOspfVirtNbrRestartHelperExitRc indicates the
outcome of the last attempt at acting as a Graceful restart
helper for the neighbor.
none No restart has yet been attempted.
inProgress A restart attempt is currently underway.
completed The last restart completed successfully.
timedOut The last restart timed out.
topologyChanged The last restart was aborted due to
a topology change.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.36.19.1.13 |
tmnxOspfVirtNbrUpTimeThe value of tmnxOspfVirtNbrUpTime indicates the uninterrupted time,
in hundredths of seconds, the adjacency to this virtual neighbour
has been up.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.19.1.14 |
tmnxOspfVirtNbrLastEventTimeThe value of tmnxOspfVirtNbrLastEventTime indicates the value of
sysUpTime when the last event occurred that affected the adjacency
to the virtual neighbour.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.19.1.15 |
tmnxOspfVirtNbrDeadTmeOutstngThe value of tmnxOspfVirtNbrDeadTmeOutstng indicates the amount
of time in seconds until the dead-router interval expires.
Normally, this value should not be significantly smaller than the
configured dead router interval minus one hello interval.ro Unsigned32 (0..'7FFFFFFF'h) UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.19.1.16 |
tmnxOspfVirtNbrLastRestartTimeThe value of tmnxOspfVirtNbrLastRestartTime indicates the
last time the neighbor attempted restart.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.19.1.17 |
tmnxOspfVirtNbrRestartReasonThe value of tmnxOspfVirtNbrRestartReason indicates the OSPF
neighbor's graceful restart reason.ro TmnxOspfRestartReasonTc .1.3.6.1.4.1.6527.3.1.2.36.19.1.18 |
tmnxOspfVirtNbrStatsTableThe tmnxOspfVirtNbrStatsTable provides an extension of the
tmnxOspfVirtNbrTable for statistics for an OSPF virtual neighbor. SEQUENCE OF TmnxOspfVirtNbrStatsEntry .1.3.6.1.4.1.6527.3.1.2.36.20 |
tmnxOspfVirtNbrStatsEntryEach row entry in the tmnxOspfVirtNbrStatsTable represents
additional columns for statistics for an OSPF virtual neighbor. TmnxOspfVirtNbrStatsEntry .1.3.6.1.4.1.6527.3.1.2.36.20.1 |
tmnxOspfVirtNbrEventsThe value of tmnxOspfVirtNbrEvents indicates the number of times
this virtual link has changed its state, or an error has occurred.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.20.1.1 |
tmnxOspfVirtNbrLsRetransQLenThe value of tmnxOspfVirtNbrLsRetransQLen indicates the current
length of the retransmission queue.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.20.1.2 |
tmnxOspfVirtNbrBadNbrStatesThe value of tmnxOspfVirtNbrBadNbrStates indicates the total
number of OSPF packets received when the virtual neighbor state
was not expecting to receive this packet type since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.20.1.3 |
tmnxOspfVirtNbrLsaInstallFailThe value of tmnxOspfVirtNbrLsaInstallFail indicates the total
number of times when an LSA could not be installed into the LSDB
due to a resource allocation issue since tmnxOspfAdminState was
last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.20.1.4 |
tmnxOspfVirtNbrBadSeqNumsThe value of tmnxOspfVirtNbrBadSeqNums indicates the total number
of times when a database description packet was received with a
sequence number mismatch since tmnxOspfAdminState was last set to
'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.20.1.5 |
tmnxOspfVirtNbrBadMTUsThe value of tmnxOspfVirtNbrBadMTUs indicates the total number
of times when the MTU in a received database description packet
was larger than the MTU of the receiving interface since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.20.1.6 |
tmnxOspfVirtNbrBadPacketsThe value of tmnxOspfVirtNbrBadPackets indicates the total number of
times when an LS update was received with an illegal LS type or
an option mismatch since tmnxOspfAdminState was last set to
'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.20.1.7 |
tmnxOspfVirtNbrLsaNotInLsdbsThe value of tmnxOspfVirtNbrLsaNotInLsdbs indicates the total
number of times when an LS request was received for an LSA not
installed in the LSDB of this router since tmnxOspfAdminState was
last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.20.1.8 |
tmnxOspfVirtNbrOptionMismatchThe value of tmnxOspfVirtNbrOptionMismatch indicates the total
number of times when a LS update was received with an option mismatch
since tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.20.1.9 |
tmnxOspfVirtNbrDuplicatesThe value of tmnxOspfVirtNbrDuplicates indicates the total number of
times when a duplicate database description packet was received
during the Exchange state since tmnxOspfAdminState was last set to
'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.20.1.10 |
tmnxOspfVirtNbrNumRestartsThe value of tmnxOspfVirtNbrNumRestarts indicates the number
of times the virtual neighbor has attempted restart since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.20.1.11 |
tmnxOspfAreaAggrTableThe tmnxOspfAreaAggrTable contains information about area
aggregates defined by a range of IP prefixes specified by a
prefix/prefix length pair. Note that if ranges are configured
such that one range subsumes another range the most specific
match is the preferred one. SEQUENCE OF TmnxOspfAreaAggrEntry .1.3.6.1.4.1.6527.3.1.2.36.21 |
tmnxOspfAreaAggrEntryThe tmnxOspfAreaAggrEntry contains information about a specific
range of IP prefixes specified by a prefix/prefix length pair.
Note that if ranges are configured such that one range subsumes
another range the most specific match is the preferred one. TmnxOspfAreaAggrEntry .1.3.6.1.4.1.6527.3.1.2.36.21.1 |
tmnxOspfAreaAggrAreaIDThe value of tmnxOspfAreaAggrAreaID specifies the Area the
Address Aggregate is to be found within. TmnxOspfAreaIdTc .1.3.6.1.4.1.6527.3.1.2.36.21.1.1 |
tmnxOspfAreaAggrAreaLsdbTypeThe value of tmnxOspfAreaAggrAreaLsdbType specifies the type of
the Address Aggregate. This field specifies the Area Lsdb type
that this Address Aggregate applies to. Enumeration .1.3.6.1.4.1.6527.3.1.2.36.21.1.2 |
tmnxOspfAreaAggrPrefixTypeThe tmnxOspfAreaAggrPrefixType specifies the prefix type of
tmnxOspfAreaAggrPrefix. For addresses of IPv6 type only addresses
without zone index are expected. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.36.21.1.3 |
tmnxOspfAreaAggrPrefixThe value of tmnxOspfAreaAggrPrefix specifies the IP Prefix. InetAddress .1.3.6.1.4.1.6527.3.1.2.36.21.1.4 |
tmnxOspfAreaAggrPrefixLengthThe value of tmnxOspfAreaAggrPrefixLength specifies the length of
the prefix (in bits). An IPv6 prefix cannot be shorter than
3 bits. The 0, 1, and 2 prefix lengths are only valid for IPv4
addresses. InetAddressPrefixLength .1.3.6.1.4.1.6527.3.1.2.36.21.1.5 |
tmnxOspfAreaAggrStatusThe value of tmnxOspfAreaAggrStatus controls the creation and
deletion of row entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.21.1.6 |
tmnxOspfAreaAggrLastChangedThe value of tmnxOspfAreaAggrLastChanged indicates the value of
sysUpTime when a configurable object in this row was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.21.1.7 |
tmnxOspfAreaAggrEffectThe value of tmnxOspfAreaAggrEffect specifies the prefixes
subsumed by ranges either trigger the advertisement of the
indicated aggregate, 'advertiseMatching', or result in the prefix
not being advertised at all outside the area.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.36.21.1.8 |
tmnxOspfAreaAggrRouteTagThe value of tmnxOspfAreaAggrRouteTag specifies the tag that
is advertised only in the summarized As-External LSA when
summarizing from NSSA-LSAs to AS-External-LSAs.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.36.21.1.9 |
tmnxOspfIfMD5KeyTableThe tmnxOspfIfMD5KeyTable contains a list of MD5 keys to be used
to authenticate OSPFv2 packets.
This table is obsoleted in release 9.0. It is replaced with
tmnxOspfNgIfMD5KeyTable.obsolete SEQUENCE OF TmnxOspfIfMD5KeyEntry .1.3.6.1.4.1.6527.3.1.2.36.22 |
tmnxOspfIfMD5KeyEntryEach row entry represents a MD5 key to be used to authenticate
a OSPFv2 packet addressed to a particular OSPF IP address.
Entries can be created and deleted via SNMP SET operations.
Creation requires a SET request containing at least
tmnxOspfIfMD5KeyKey and tmnxOspfIfMD5KeyStatus.obsolete TmnxOspfIfMD5KeyEntry .1.3.6.1.4.1.6527.3.1.2.36.22.1 |
tmnxOspfIfMD5KeyIndexThe value of tmnxOspfIfMD5KeyIndex provides a unique identifier
for a key to be used for authentication on a specific OSPFv2
IP address.
If tmnxOspfIfMD5KeyIndex has a value of 0, it means that no
keys are configured.obsolete TmnxOspfIfMD5KeyId .1.3.6.1.4.1.6527.3.1.2.36.22.1.1 |
tmnxOspfIfMD5KeyStatusThe object tmnxOspfIfMD5KeyStatus is the RowStatus used for
creation, deletion, or control of tmnxOspfIfMD5KeyTable entries.
Before the row can be placed into the 'active' state
tmnxOspfIfMD5KeyKey must have been assigned a value.rwobsolete RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.22.1.2 |
tmnxOspfIfMD5KeyKeyThe value of tmnxOspfIfMD5KeyKey specifies the MD5 authentication
key to be used on this OSPFv2 IP address.
When read, tmnxOspfIfMD5KeyKey always returns an OCTET STRING of
length zero.rwobsolete OCTET STRING .1.3.6.1.4.1.6527.3.1.2.36.22.1.3 |
tmnxOspfIfMD5KeyStartTimeThe value of tmnxOspfIfMD5KeyStartTime specifies the date and
time when this MD5 authentication key becomes valid for use.
If no date and time is set, represented by a DateAndTime string
with 0 length, the key is valid by default.rwobsolete DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.22.1.4 |
tmnxOspfIfMD5KeyStopTimeThe value of tmnxOspfIfMD5KeyStopTime specifies the date and
time when this MD5 authentication key becomes invalid for use.
If no date and time is set, represented by a DateAndTime string
with 0 length, the key is valid indefinitely.rwobsolete DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.22.1.5 |
tmnxOspfVirtIfMD5KeyTableThe tmnxOspfVirtIfMD5KeyTable contains a list of MD5 keys to be used
to authenticate OSPFv2 packets on an OSPFv2 interface. SEQUENCE OF TmnxOspfVirtIfMD5KeyEntry .1.3.6.1.4.1.6527.3.1.2.36.23 |
tmnxOspfVirtIfMD5KeyEntryEach row entry represents a MD5 key to be used to authenticate
a OSPFv2 packet addressed to a particular OSPFv2 IP address.
Entries can be created and deleted via SNMP SET operations.
Creation requires a SET request containing at least
tmnxOspfVirtIfMD5KeyKey and tmnxOspfVirtIfMD5KeyStatus. TmnxOspfVirtIfMD5KeyEntry .1.3.6.1.4.1.6527.3.1.2.36.23.1 |
tmnxOspfVirtIfMD5KeyIndexThe value of tmnxOspfVirtIfMD5KeyIndex provides a unique identifier
for a key to be used for authentication on a specific OSPFv2
virtual interface.
If tmnxOspfVirtIfMD5KeyIndex has a value of 0, it means that no
keys are configured. TmnxOspfIfMD5KeyId .1.3.6.1.4.1.6527.3.1.2.36.23.1.1 |
tmnxOspfVirtIfMD5KeyStatusThe value of tmnxOspfVirtIfMD5KeyStatus is the RowStatus used
for creation, deletion, or control of tmnxOspfVirtIfMD5KeyTable
entries. Before the row can be placed into the 'active' state
tmnxOspfVirtIfMD5KeyKey must have been assigned a value.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.23.1.2 |
tmnxOspfVirtIfMD5KeyKeyThe value of tmnxOspfVirtIfMD5KeyKey specifies the MD5
authentication key to be used on this OSPFv2 virtual interface.
When read, tmnxOspfVirtIfMD5KeyKey always returns an OCTET STRING
of length zero.rw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.36.23.1.3 |
tmnxOspfVirtIfMD5KeyStartTimeThe value of tmnxOspfVirtIfMD5KeyStartTime specifies the date and
time when this MD5 authentication key becomes valid for use. If no
date and time is set, represented by a DateAndTime string with 0
length, the key is valid by default.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.23.1.4 |
tmnxOspfVirtIfMD5KeyStopTimeThe value of tmnxOspfVirtIfMD5KeyStopTime specifies the date and
time when this MD5 authentication key becomes invalid for use.
If no date and time is set, represented by a DateAndTime string
with 0 length, the key is valid indefinitely.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.23.1.5 |
tmnxOspfNotifyObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.36.24 |
tmnxOspfSetTrapThe value of tmnxOspfSetTrap specifies a four-octet string serving
as a bit map for the OSPF trap events. This object is used
to enable and disable specific OSPF traps where a 1 in the bit
field represents enabled. The right-most bit (least
significant) represents trap 0.rw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.36.24.1 |
tmnxOspfConfigErrorTypeThe value of tmnxOspfConfigErrorType indicates the potential types
of configuration conflicts. Used by the tmnxOspfNgIfConfigError and
tmnxOspfVirtIfConfigError notifications. When the last value of a
notification using this object is needed, but no notifications of
that type have been sent, the value pertaining to this object
should be returned as 'noError'.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.36.24.2 |
tmnxOspfPacketTypeThe value of tmnxOspfPacketType specifies the OSPF packet type.
When the last value of a notification using this object is needed,
but no notifications of that type have been sent, this value
pertaining to this object should be returned as 'nullPacket'.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.36.24.3 |
tmnxOspfPacketSrcAddressTypeThe IP address type of tmnxOspfPacketSrcAddress.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.36.24.4 |
tmnxOspfPacketSrcAddressThe value of tmnxOspfPacketSrcAddress indicates the IP address of an
inbound packet that cannot be identified by a neighbor instance.
When the last value of a notification using this object is
needed, but no notifications of that type have been sent, this
value pertaining to this object should be returned as 0.0.0.0ro InetAddress .1.3.6.1.4.1.6527.3.1.2.36.24.5 |
tmnxOspfIfIpNameThe value of tmnxOspfIfIpName specifies the name of the OSPF
interface that has experienced a state change. It is the
an ASCII string representation of the IP address of the IP
interface on which OSPF is configured. It is used by the
tmnxOspfNgIfStateChange notification.ro DisplayString .1.3.6.1.4.1.6527.3.1.2.36.24.6 |
tmnxOspfIfEventThe value of tmnxOspfIfEvent specifies the root cause that
resulted in a tmnxOspfNgIfStateChange notification. Some
possible causes are interface up, interface down, and neighbor
changed.ro DisplayString .1.3.6.1.4.1.6527.3.1.2.36.24.7 |
tmnxOspfFailureReasonCodeThe value of tmnxOspfFailureReasonCode indicates the reason for the
last OSPF failure which resulted in it being marked operationally down.
This object is used by the tmnxOspfFailureDisabled notification.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.36.24.8 |
tmnxOspfBadPacketErrTypero Enumeration .1.3.6.1.4.1.6527.3.1.2.36.24.9 |
tmnxOspfShamIfTableThe tmnxOspfShamIfTable contains information about the sham links
associated with OSPF. SEQUENCE OF TmnxOspfShamIfEntry .1.3.6.1.4.1.6527.3.1.2.36.25 |
tmnxOspfShamIfEntryThe tmnxOspfShamIfEntry contains information about a single
Sham Link. TmnxOspfShamIfEntry .1.3.6.1.4.1.6527.3.1.2.36.25.1 |
tmnxOspfShamIfIndexThe value of tmnxOspfShamIfIndex specifies the interface index of
the local OSPF interface. It corresponds to the interface index of
the IP interface which is configured as the local end of the
sham link. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.25.1.1 |
tmnxOspfShamIfInstIdThe value of tmnxOspfShamIfInstId specifies the interface instance
ID to be used for the sham link. This ID has local link
significance only. TmnxOspfIfInstIdTc .1.3.6.1.4.1.6527.3.1.2.36.25.1.2 |
tmnxOspfShamIfRemoteNbrAddrTypeThe value of tmnxOspfShamIfRemoteNbrAddrType type indicates the IP
address type of tmnxOspfShamIfRemoteNbrAddress.
tmnxOspfShamIfRemoteNbrAddrType supports only InetAddressType
value 'ipv4'. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.36.25.1.3 |
tmnxOspfShamIfRemoteNbrAddressThe value of tmnxOspfShamIfRemoteNbrAddress specifies the IP address
of the sham link Neighbor. It corresponds to remote end of the sham
link. InetAddress .1.3.6.1.4.1.6527.3.1.2.36.25.1.4 |
tmnxOspfShamIfStatusThe value of tmnxOspfShamIfStatus controls creation and deletion of
a row entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.25.1.5 |
tmnxOspfShamIfLastChangedThe value of tmnxOspfShamIfLastChanged indicates the sysUpTime
when a configurable object in this row was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.25.1.6 |
tmnxOspfShamIfAreaIdThe value of tmnxOspfShamIfAreaId specifies a 32-bit integer uniquely
identifying the area which the sham link belongs to. Area ID 0 is
used for the OSPF backbone.rw TmnxOspfAreaIdTc .1.3.6.1.4.1.6527.3.1.2.36.25.1.7 |
tmnxOspfShamIfAdminStateThe value of tmnxOspfShamIfAdminState specifies the OSPF interface's
administrative state on this sham link.rw Status (OSPF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.25.1.8 |
tmnxOspfShamIfTransitDelayThe value of tmnxOspfShamIfTransitDelay specifies the estimated
number of seconds it takes to transmit a link state update packet
over this sham link.rw TmnxOspfUpToRefreshIntervalTc .1.3.6.1.4.1.6527.3.1.2.36.25.1.9 |
tmnxOspfShamIfRetransIntervalThe value of tmnxOspfShamIfRetransInterval specifies the number of
seconds between link state advertisement retransmissions, for
adjacencies belonging to this interface. This value is also used
when retransmitting database description and link state request
packets.rw TmnxOspfUpToRefreshIntervalTc .1.3.6.1.4.1.6527.3.1.2.36.25.1.10 |
tmnxOspfShamIfHelloIntervalThe value of tmnxOspfShamIfHelloInterval specifies the length of
time, in seconds, between the Hello packets that the router sends
on the sham link. This value MUST be same for all routers attached
to a common network.rw HelloRange UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.25.1.11 |
tmnxOspfShamIfRtrDeadIntervalThe value of tmnxOspfShamIfRtrDeadInterval specifies the number of
seconds that a router's Hello packets have not been seen before
its neighbors declare the router down on the sham link. This
should be greater than or equal to (2 * tmnxOspfShamIfHelloInterval).
This value MUST be same for all routers attached to a common network.rw TmnxOspfDeadIntRangeTc UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.25.1.12 |
tmnxOspfShamIfCfgMetricThe value of tmnxOspfShamIfCfgMetric specifies the desired
metric value assigned to this sham link.rw TmnxOspfShamIfMetricTc .1.3.6.1.4.1.6527.3.1.2.36.25.1.13 |
tmnxOspfShamIfAuthTypeThe value of tmnxOspfShamIfAuthType specifies the authentication
type to use for a sham link.
Note that this object can be used to engage in significant attacks
against an OSPF router.rw TmnxOspfAuthenticationType .1.3.6.1.4.1.6527.3.1.2.36.25.1.14 |
tmnxOspfShamIfAuthKeyThe value of tmnxOspfShamIfAuthKey specifies the authentication key
string. The cleartext password is used as an OSPF Authentication
key when simplePassword security is enabled. This object does not
access any OSPF Cryptographic (e.g. MD5) Authentication Key under
any circumstance.
If the key length is shorter than 8 octets, the agent will left
adjust and zero fill to 8 octets.
Unauthenticated interfaces need no authentication key, and simple
password authentication cannot use a key of more than 8 octets.
Note that the use of simplePassword authentication is NOT recommended
when there is concern regarding attack upon the OSPF system.
This authentication is only sufficient to protect against
accidental misconfigurations because it re-uses cleartext passwords.
[RFC-1704]
When read, tmnxOspfShamIfAuthKey always returns an Octet String of
length zero.
This object is valid only when tmnxOspfVersion has a value of
'version2'.rw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.36.25.1.15 |
tmnxOspfShamIfStateThe value of tmnxOspfShamIfState indicates the operational state
of this sham link.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.36.25.1.16 |
tmnxOspfShamIfLastEnabledTimeThe value of tmnxOspfShamIfLastEnabledTime indicates the sysUpTime
value when ospfIfAdminStat was last set to enabled (1) to run the
ospf on this interface.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.25.1.17 |
tmnxOspfShamIfLinkLsaCountThe value of tmnxOspfShamIfLinkLsaCount indicates the total
number of Link-Scope link-state advertisements in this link's
link-state database.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.25.1.18 |
tmnxOspfShamIfLinkLsaCksumSumThe value of tmnxOspfShamIfLinkLsaCksumSum indicates the 32-bit
unsigned sum of the Link-Scope link-state advertisements' LS
checksums contained in this link's link-state database. The
sum can be used to determine if there has been a change in a
router's link-state database, and to compare the link state
database of two routers.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.36.25.1.19 |
tmnxOspfShamIfLinkUnkLsaCountThe value of tmnxOspfShamIfLinkUnkLsaCount indicates the total
number of unknown Link-Scope link-state advertisements in this
link's link-state database.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.25.1.20 |
tmnxOspfShamIfLinkUnkLsaCksumSumThe value of tmnxOspfShamIfLinkUnkLsaCksumSum indicates the 32-bit
unsigned sum of the unknown Link-Scope link-state advertisements'
LS checksums contained in this link's link-state database. The
sum can be used to determine if there has been a change in a
router's link-state database, and to compare the link-state
database of two routers.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.36.25.1.21 |
tmnxOspfShamIfMD5TransmitKeyIdThe value of tmnxOspfShamIfMD5TransmitKeyId indicates the index value
used to access the row entry in the tmnxOspfShamIfMD5KeyTable that
specifies the authentication type and key transmitted on this
OSPF interface. This object is valid only when tmnxOspfVersion
has the value 'version2'.
If tmnxOspfShamIfMD5TransmitKeyId has a value of 0, it means that no
keys are configured.ro TmnxOspfIfMD5KeyId .1.3.6.1.4.1.6527.3.1.2.36.25.1.22 |
tmnxOspfShamIfLocalIpAddressTypeThe value of tmnxOspfShamIfLocalIpAddressType indicates the
IP address type of tmnxOspfShamIfLocalIpAddress.
tmnxOspfShamIfLocalIpAddressType supports only InetAddressType
value 'ipv4'.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.36.25.1.23 |
tmnxOspfShamIfLocalIpAddressThe value of tmnxOspfShamIfLocalIpAddress indicates the IP address of
this OSPF local interface of the sham link.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.36.25.1.24 |
tmnxOspfShamIfMD5NumKeysThe value of tmnxOspfShamIfMD5NumKeys indicates the number of MD5 Key
entries for this OSPF sham link.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.25.1.25 |
tmnxOspfShamIfStatsTableThe tmnxOspfShamIfStatsTable provides an extension of the
tmnxOspfShamIfTable for statistics for an OSPF sham link. SEQUENCE OF TmnxOspfShamIfStatsEntry .1.3.6.1.4.1.6527.3.1.2.36.26 |
tmnxOspfShamIfStatsEntryEach row entry in the tmnxOspfShamIfStatsTable represents
additional columns for statistics for an OSPF sham link. TmnxOspfShamIfStatsEntry .1.3.6.1.4.1.6527.3.1.2.36.26.1 |
tmnxOspfShamIfEventsThe value of tmnxOspfShamIfEvents indicates the number of
state changes or error events on this sham link.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.1 |
tmnxOspfShamIfTxPacketsThe value of tmnxOspfShamIfTxPackets indicates the total number of
OSPF packets transmitted on this sham link since tmnxOspfAdminState
was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.2 |
tmnxOspfShamIfTxHellosThe value of tmnxOspfShamIfTxHellos indicates the total number
of OSPF Hello packets transmitted on this sham link since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.3 |
tmnxOspfShamIfTxDBDsThe value of tmnxOspfShamIfTxDBDs indicates the total number
of OSPF Database Description packets transmitted on this
sham link since tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.4 |
tmnxOspfShamIfTxLSRsThe value of tmnxOspfShamIfTxLSRs indicates the total number
of OSPF Link State Requests (LSRs) transmitted on this
sham link since tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.5 |
tmnxOspfShamIfTxLSUsThe value of tmnxOspfShamIfTxLSUs indicates the total number
of OSPF Link State Updates (LSUs) transmitted on this
sham link since tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.6 |
tmnxOspfShamIfTxLSAcksThe value of tmnxOspfShamIfTxLSAcks indicates the total number
of OSPF Link State Acknowledgements transmitted on this
sham link since tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.7 |
tmnxOspfShamIfRxPacketsThe value of tmnxOspfShamIfRxPackets indicates the total number of
OSPF packets received on this sham link since tmnxOspfAdminState was
last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.8 |
tmnxOspfShamIfRxHellosThe value of tmnxOspfShamIfRxHellos indicates the total number of
OSPF Hello packets received on this sham link since tmnxOspfAdminState
was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.9 |
tmnxOspfShamIfRxDBDsThe value of tmnxOspfShamIfRxDBDs indicates the total number of
OSPF Database Description packets received on this sham link since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.10 |
tmnxOspfShamIfRxLSRsThe value of tmnxOspfShamIfRxLSRs indicates the total number of
Link State Requests (LSRs) received on this sham link since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.11 |
tmnxOspfShamIfRxLSUsThe value of tmnxOspfShamIfRxLSUs indicates the total number of
Link State Updates (LSUs) received on this sham link since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.12 |
tmnxOspfShamIfRxLSAcksThe value of tmnxOspfShamIfRxLSAcks indicates the total number of
Link State Acknowledgements received on this sham link since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.13 |
tmnxOspfShamIfDiscardPacketsThe value of tmnxOspfShamIfDiscardPackets indicates the total number
of OSPF packets discarded on this sham link since tmnxOspfAdminState
was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.14 |
tmnxOspfShamIfRetransmitOutsThe value of tmnxOspfShamIfRetransmitOuts indicates the total number
of OSPF Retransmits sent on this sham link since tmnxOspfAdminState
was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.15 |
tmnxOspfShamIfBadVersionsThe value of tmnxOspfShamIfBadVersions indicates the total number of
OSPF packets received with bad OSPF version numbers since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.16 |
tmnxOspfShamIfBadNetworksThe value of tmnxOspfShamIfBadNetworks indicates the total number of
OSPF packets received with invalid network or mask since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.17 |
tmnxOspfShamIfBadAreasThe value of tmnxOspfShamIfBadAreas indicates the total number of OSPF
packets received with an area mismatch since tmnxOspfAdminState
was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.18 |
tmnxOspfShamIfBadDstAddrsThe value of tmnxOspfShamIfBadDstAddrs indicates the total number
of OSPF packets received with the incorrect IP destination address
since tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.19 |
tmnxOspfShamIfBadNeighborsThe value of tmnxOspfShamIfBadNeighbors indicates the total number
of OSPF packets received where the neighbor information does not
match the information this router has for the neighbor since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.20 |
tmnxOspfShamIfBadPacketTypesThe value of tmnxOspfShamIfBadPacketTypes indicates the total number
of OSPF packets received with an invalid OSPF packet type since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.21 |
tmnxOspfShamIfLastEventTimeThe value of tmnxOspfShamIfLastEventTime indicates the value of
sysUpTime when an event was last associated with this OSPF
sham link.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.26.1.22 |
tmnxOspfShamIfBadLengthsThe value of tmnxOspfShamIfBadLengths indicates the total number
of OSPF packets received on this sham link with a total length
not equal to the length given in the packet itself since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.23 |
tmnxOspfShamIfBadHelloIntervalsThe value of tmnxOspfShamIfBadHelloIntervals indicates the
total number of OSPF packets received where the hello interval
given in packet was not equal to that configured on this sham link
since tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.24 |
tmnxOspfShamIfBadDeadIntervalsThe value of tmnxOspfShamIfBadDeadIntervals indicates the
total number of OSPF packets received where the dead interval
given in the packet was not equal to that configured on this
sham link since tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.25 |
tmnxOspfShamIfBadOptionsThe value of tmnxOspfShamIfBadOptions indicates the total number
of OSPF packets received with an option that does not match
those configured for this sham link or area since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.26 |
tmnxOspfShamIfRxBadChecksumsThe value of tmnxOspfShamIfRxBadChecksums indicates the count
of LSAs received with bad checksums.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.27 |
tmnxOspfShamIfBadAuthTypesThe value of tmnxOspfShamIfBadAuthTypes indicates the total
number of OSPF packets received with an invalid authorization
type since tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.28 |
tmnxOspfShamIfAuthFailuresThe value of tmnxOspfShamIfAuthFailures indicates the total
number of OSPF packets received with an invalid authorization
key since tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.26.1.29 |
tmnxOspfShamIfMD5KeyTableThe tmnxOspfShamIfMD5KeyTable contains a list of MD5 keys to be used
to authenticate OSPFv2 packets. SEQUENCE OF TmnxOspfShamIfMD5KeyEntry .1.3.6.1.4.1.6527.3.1.2.36.27 |
tmnxOspfShamIfMD5KeyEntryEach row entry represents a MD5 key to be used to authenticate
an OSPFv2 packet addressed to a particular OSPF IP address.
Entries can be created and deleted via SNMP SET operations.
Creation requires a SET request containing at least
tmnxOspfShamIfMD5KeyKey and tmnxOspfShamIfMD5KeyStatus. TmnxOspfShamIfMD5KeyEntry .1.3.6.1.4.1.6527.3.1.2.36.27.1 |
tmnxOspfShamIfMD5KeyIndexThe value of tmnxOspfShamIfMD5KeyIndex provides a unique identifier
for a key to be used for authentication on a specific OSPFv2
IP address.
If tmnxOspfShamIfMD5KeyIndex has a value of 0, it means that no
keys are configured. TmnxOspfIfMD5KeyId .1.3.6.1.4.1.6527.3.1.2.36.27.1.1 |
tmnxOspfShamIfMD5KeyStatusThe object tmnxOspfShamIfMD5KeyStatus is the RowStatus used for
creation, deletion, or control of tmnxOspfShamIfMD5KeyTable entries.
Before the row can be placed into the 'active' state
tmnxOspfShamIfMD5KeyKey must have been assigned a value.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.27.1.2 |
tmnxOspfShamIfMD5KeyKeyThe value of tmnxOspfShamIfMD5KeyKey specifies the MD5 authentication
key to be used on this OSPFv2 IP address.
When read, tmnxOspfShamIfMD5KeyKey always returns an OCTET STRING of
length zero.rw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.36.27.1.3 |
tmnxOspfShamIfMD5KeyStartTimeThe value of tmnxOspfShamIfMD5KeyStartTime specifies the date and
time when this MD5 authentication key becomes valid for use.
If no date and time is set, represented by a DateAndTime string
with 0 length, the key is valid by default.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.27.1.4 |
tmnxOspfShamIfMD5KeyStopTimeThe value of tmnxOspfShamIfMD5KeyStopTime specifies the date and
time when this MD5 authentication key becomes invalid for use.
If no date and time is set, represented by a DateAndTime string
with 0 length, the key is valid indefinitely.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.27.1.5 |
tmnxOspfShamNbrTableThe tmnxOspfShamNbrTable contains sham links neighbors information. SEQUENCE OF TmnxOspfShamNbrEntry .1.3.6.1.4.1.6527.3.1.2.36.28 |
tmnxOspfShamNbrEntryThe tmnxOspfShamNbrEntry contains information for a specific
sham link neighbor. TmnxOspfShamNbrEntry .1.3.6.1.4.1.6527.3.1.2.36.28.1 |
tmnxOspfShamNbrIfIndexThe value of tmnxOspfShamNbrIfIndex specifies the local link ID of
the link over which the sham link neighbor can be reached. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.28.1.1 |
tmnxOspfShamNbrIfInstIdThe value of tmnxOspfShamNbrIfInstId specifies the interface instance
over which the sham link neighbor can be reached. This ID has
local link significance only. TmnxOspfIfInstIdTc .1.3.6.1.4.1.6527.3.1.2.36.28.1.2 |
tmnxOspfShamNbrAddressTypeThe value of tmnxOspfShamNbrAddressType indicates the address
type of tmnxOspfShamNbrAddress. For IPv6 address type only
addresses without zone index are expected. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.36.28.1.3 |
tmnxOspfShamNbrAddressThe value of tmnxOspfShamNbrAddress indicates the IP address
advertised by this Sham link Neighbor. It must be a Global scope
address. InetAddress .1.3.6.1.4.1.6527.3.1.2.36.28.1.4 |
tmnxOspfShamNbrRtrIdThe value of tmnxOspfShamNbrRtrId specifies a 32-bit integer uniquely
identifying the neighboring router in the Autonomous System. TmnxOspfRouterIdTc .1.3.6.1.4.1.6527.3.1.2.36.28.1.5 |
tmnxOspfShamNbrOptionsThe value of tmnxOspfShamNbrOptions indicates a Bit Mask
corresponding to the sham link neighbor's options field.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.36.28.1.6 |
tmnxOspfShamNbrStateThe value of tmnxOspfShamNbrState indicates the state of the
Sham link Neighbor Relationship.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.36.28.1.7 |
tmnxOspfShamNbrHelloSuppressedThe value of tmnxOspfShamNbrHelloSuppressed indicates whether
Hellos are being suppressed to the sham link neighborro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.28.1.8 |
tmnxOspfShamNbrIfIdThe value of tmnxOspfShamNbrIfId indicates the interface ID that
the neighbor advertises in its Hello Packets on this sham link,
that is, the neighbor's local interface ID.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.28.1.9 |
tmnxOspfShamNbrRestartHelperStatusThe value of tmnxOspfShamNbrRestartHelperStatus indicates whether
the router is acting as a Graceful restart helper for the sham
link neighbor.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.36.28.1.10 |
tmnxOspfShamNbrRestartHelperAgeThe value of tmnxOspfShamNbrRestartHelperAge indicates the
remaining time in current OSPF Graceful restart interval,
if the router is acting as a restart helper for the sham link
neighbor.ro TmnxOspfUpToRefreshIntervalTc UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.28.1.11 |
tmnxOspfShamNbrRestartHelperExitRcThe value of tmnxOspfShamNbrRestartHelperExitRc indicates the
outcome of the last attempt at acting as a Graceful restart
helper for the sham link neighbor.
none No restart has yet been attempted.
inProgress A restart attempt is currently underway.
completed The last restart completed successfully.
timedOut The last restart timed out.
topologyChanged The last restart was aborted due to
a topology change.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.36.28.1.12 |
tmnxOspfShamNbrUpTimeThe value of tmnxOspfShamNbrUpTime indicates the uninterrupted time,
in hundredths of seconds, the adjacency to this sham link neighbour
has been up.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.28.1.13 |
tmnxOspfShamNbrLastEventTimeThe value of tmnxOspfShamNbrLastEventTime indicates the value of
sysUpTime when the last event occurred that affected the adjacency
to the sham link neighbour.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.28.1.14 |
tmnxOspfShamNbrDeadTmeOutstngThe value of tmnxOspfShamNbrDeadTmeOutstng indicates the amount
of time in seconds until the dead-router interval expires.
Normally, this value should not be significantly smaller than the
configured dead router interval minus one hello interval.ro Unsigned32 (0..'7FFFFFFF'h) UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.28.1.15 |
tmnxOspfShamNbrLastRestartTimeThe value of tmnxOspfShamNbrLastRestartTime indicates the
last time the sham link neighbor attempted restart.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.28.1.16 |
tmnxOspfShamNbrRestartReasonThe value of tmnxOspfShamNbrRestartReason indicates the OSPF
sham link neighbor's graceful restart reason.ro TmnxOspfRestartReasonTc .1.3.6.1.4.1.6527.3.1.2.36.28.1.17 |
tmnxOspfShamNbrStatsTableThe tmnxOspfShamNbrStatsTable provides an extension of the
tmnxOspfShamNbrTable for statistics for an OSPF sham link neighbor. SEQUENCE OF TmnxOspfShamNbrStatsEntry .1.3.6.1.4.1.6527.3.1.2.36.29 |
tmnxOspfShamNbrStatsEntryEach row entry in the tmnxOspfShamNbrStatsTable represents
additional columns for statistics for an OSPF sham link neighbor. TmnxOspfShamNbrStatsEntry .1.3.6.1.4.1.6527.3.1.2.36.29.1 |
tmnxOspfShamNbrEventsThe value of tmnxOspfShamNbrEvents indicates the number of times
this sham link has changed its state, or an error has occurred.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.29.1.1 |
tmnxOspfShamNbrLsRetransQLenThe value of tmnxOspfShamNbrLsRetransQLen indicates the current
length of the retransmission queue.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.29.1.2 |
tmnxOspfShamNbrBadNbrStatesThe value of tmnxOspfShamNbrBadNbrStates indicates the total
number of OSPF packets received when the sham link neighbor state
was not expecting to receive this packet type since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.29.1.3 |
tmnxOspfShamNbrLsaInstallFailThe value of tmnxOspfShamNbrLsaInstallFail indicates the total
number of times when an LSA could not be installed into the LSDB
due to a resource allocation issue since tmnxOspfAdminState was
last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.29.1.4 |
tmnxOspfShamNbrBadSeqNumsThe value of tmnxOspfShamNbrBadSeqNums indicates the total number
of times when a database description packet was received with a
sequence number mismatch since tmnxOspfAdminState was last set to
'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.29.1.5 |
tmnxOspfShamNbrBadMTUsThe value of tmnxOspfShamNbrBadMTUs indicates the total number
of times when the MTU in a received database description packet
was larger than the MTU of the receiving interface since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.29.1.6 |
tmnxOspfShamNbrBadPacketsThe value of tmnxOspfShamNbrBadPackets indicates the total number of
times when an LS update was received with an illegal LS type or
an option mismatch since tmnxOspfAdminState was last set to
'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.29.1.7 |
tmnxOspfShamNbrLsaNotInLsdbsThe value of tmnxOspfShamNbrLsaNotInLsdbs indicates the total
number of times when an LS request was received for an LSA not
installed in the LSDB of this router since tmnxOspfAdminState was
last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.29.1.8 |
tmnxOspfShamNbrOptionMismatchThe value of tmnxOspfShamNbrOptionMismatch indicates the total
number of times when a LS update was received with an option mismatch
since tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.29.1.9 |
tmnxOspfShamNbrDuplicatesThe value of tmnxOspfShamNbrDuplicates indicates the total number of
times when a duplicate database description packet was received
during the Exchange state since tmnxOspfAdminState was last set to
'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.29.1.10 |
tmnxOspfShamNbrNumRestartsThe value of tmnxOspfShamNbrNumRestarts indicates the number
of times the sham link neighbor has attempted restart since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.29.1.11 |
tmnxOspfNgLinkLsdbTableThe tmnxOspfNgLinkLsdbTable contains the OSPF Process's Link-Scope
Link State Database. SEQUENCE OF TmnxOspfNgLinkLsdbEntry .1.3.6.1.4.1.6527.3.1.2.36.30 |
tmnxOspfNgLinkLsdbEntryThe tmnxOspfNgLinkLsdbEntry contains information for a single
Link-Scope Link State Advertisement. TmnxOspfNgLinkLsdbEntry .1.3.6.1.4.1.6527.3.1.2.36.30.1 |
tmnxOspfNgLinkLsdbIfIndexThe value of tmnxOspfNgLinkLsdbIfIndex specifies the identifier
of the link from which the LSA was received. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.30.1.1 |
tmnxOspfNgLinkLsdbIfInstIdThe value of tmnxOspfNgLinkLsdbIfInstId specifies the identifier
of the interface instance from which the LSA was received. TmnxOspfIfInstIdTc .1.3.6.1.4.1.6527.3.1.2.36.30.1.2 |
tmnxOspfNgLinkLsdbIfAreaIdThe value of tmnxOspfNgLinkLsdbIfAreaId specifies
specifies the OSPF Area Identifier. TmnxOspfAreaIdTc .1.3.6.1.4.1.6527.3.1.2.36.30.1.3 |
tmnxOspfNgLinkLsdbTypeThe value of tmnxOspfNgLinkLsdbType specifies the type of the
link state advertisement. Each link state type has a separate
advertisement format. Link-Scope LSAs unrecognized by the router
are also stored in this database. Unsigned32(0..'FFFFFFFF'h) .1.3.6.1.4.1.6527.3.1.2.36.30.1.4 |
tmnxOspfNgLinkLsdbRouterIdThe value of tmnxOspfNgLinkLsdbRouterId specifies the 32-bit number
that uniquely identifies the originating router in the Autonomous
System. TmnxOspfRouterIdTc .1.3.6.1.4.1.6527.3.1.2.36.30.1.5 |
tmnxOspfNgLinkLsdbLsidThe value of tmnxOspfNgLinkLsdbLsid specifies the Link State ID that
is an LS Type Specific field containing a unique identifier;
it identifies the piece of the routing domain that is being
described by the advertisement. In OSPFv3, the LSID has no
addressing semantics. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.30.1.6 |
tmnxOspfNgLinkLsdbSequenceThe value of tmnxOspfNgLinkLsdbSequence indicates the signed
32-bit integer sequence number field. It is used to detect
old and duplicate link-state advertisements. The space of
sequence numbers is linearly ordered. The larger the sequence
number the more recent the advertisement.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.36.30.1.7 |
tmnxOspfNgLinkLsdbAgeThe value of tmnxOspfNgLinkLsdbAge indicates the age of the
link-state advertisement in seconds.ro Integer32 -- Should be 0..'MaxAge' -- unless 'DoNotAge' bit is set UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.30.1.8 |
tmnxOspfNgLinkLsdbChecksumThe value of tmnxOspfNgLinkLsdbChecksum indicates the checksum
of the complete contents of the advertisement, excepting the
age field. The age field is excepted so that an advertisement's
age can be incremented without updating the checksum. The
checksum used is the same that is used for ISO connectionless
datagrams; it is commonly referred to as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.36.30.1.9 |
tmnxOspfNgLinkLsdbAdvertisementThe value of tmnxOspfNgLinkLsdbAdvertisement indicates the entire
Link State Advertisement, including its header.ro OCTET STRING .1.3.6.1.4.1.6527.3.1.2.36.30.1.10 |
tmnxOspfNgLinkLsdbTypeKnownThe value of tmnxOspfNgLinkLsdbTypeKnown indicates whether the
LSA type is recognized by this Router.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.30.1.11 |
tmnxOspfNgIfTableThe tmnxOspfNgIfTable contains information about the interfaces
associated with OSPF. SEQUENCE OF TmnxOspfNgIfEntry .1.3.6.1.4.1.6527.3.1.2.36.31 |
tmnxOspfNgIfEntryThe tmnxOspfNgIfEntry contains information about one interface
associated with OSPF. TmnxOspfNgIfEntry .1.3.6.1.4.1.6527.3.1.2.36.31.1 |
tmnxOspfNgIfIndexThe value of tmnxOspfNgIfIndex specifies the interface index of
this OSPF interface. It corresponds to the interface index of the
IP interface on which OSPF is configured. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.31.1.1 |
tmnxOspfNgIfInstIdThe value of tmnxOspfNgIfInstId specifies the OSPF instance. It
enables multiple interface instances of OSPF to be run over a
single link. Each protocol instance would be assigned a separate
ID. This ID has local link significance only. TmnxOspfIfInstIdTc .1.3.6.1.4.1.6527.3.1.2.36.31.1.2 |
tmnxOspfNgIfAreaIdThe value of tmnxOspfNgIfAreaId specifies a 32-bit integer uniquely
identifying the area to which the interface connects. Area ID
0 is used for the OSPF backbone. TmnxOspfAreaIdTc .1.3.6.1.4.1.6527.3.1.2.36.31.1.3 |
tmnxOspfNgIfStatusThe value of tmnxOspfNgIfStatus controls creation and deletion of
a row entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.31.1.4 |
tmnxOspfNgIfLastChangedThe value of tmnxOspfNgIfLastChanged indicates the sysUpTime
when a configurable object in this row was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.31.1.5 |
tmnxOspfNgIfCfgTypeThe value of tmnxOspfNgIfCfgType specifies the OSPF interface type.
The value of 'unspecified' is never returned in response to a query.
It is only used in SET requests to reset the interface type to its
default value based on the underlying physical interface type.rw TmnxOspfIfTypeTc .1.3.6.1.4.1.6527.3.1.2.36.31.1.6 |
tmnxOspfNgIfAdminStateThe value of tmnxOspfNgIfAdminState specifies the OSPF interface's
administrative status. The value formed on the interface, and the
interface will be advertised as an internal route to some area.
The value 'disabled' denotes that the interface is external to OSPF.rw Status (OSPF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.31.1.7 |
tmnxOspfNgIfRtrPriorityThe value of tmnxOspfNgIfRtrPriority specifies the priority of
this interface. Used in multi-access networks, this field is
used in the designated router election algorithm. The value 0
signifies that the router is not eligible to become the designated
router on this particular network. In the event of a tie in
this value, routers will use their Router ID as a tie breaker.rw DesignatedRouterPriority (OSPF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.31.1.8 |
tmnxOspfNgIfTransitDelayThe value of tmnxOspfNgIfTransitDelay specifies the estimated
number of seconds it takes to transmit a link state update packet
over this interface.rw TmnxOspfUpToRefreshIntervalTc .1.3.6.1.4.1.6527.3.1.2.36.31.1.9 |
tmnxOspfNgIfRetransIntervalThe value of tmnxOspfNgIfRetransInterval specifies the number of
seconds between link state advertisement retransmissions, for
adjacencies belonging to this interface. This value is also used
when retransmitting database description and link state request
packets.rw TmnxOspfUpToRefreshIntervalTc .1.3.6.1.4.1.6527.3.1.2.36.31.1.10 |
tmnxOspfNgIfHelloIntervalThe value of tmnxOspfNgIfHelloInterval specifies the length of time,
in seconds, between the Hello packets that the router sends on the
interface. This value MUST be the same for all routers attached to
a common network.rw HelloRange UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.31.1.11 |
tmnxOspfNgIfRtrDeadIntervalThe value of tmnxOspfNgIfRtrDeadInterval specifies the number of
seconds that a router's Hello packets have not been seen before
its neighbors declare the router down on the interface. This
should be some multiple of the Hello interval.rw TmnxOspfDeadIntRangeTc UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.31.1.12 |
tmnxOspfNgIfPollIntervalThe value of tmnxOspfNgIfPollInterval specifies the larger time
interval, in seconds, between the Hello packets sent to an inactive
non-broadcast multi-access neighbor.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.31.1.13 |
tmnxOspfNgIfCfgMTUThe value of tmnxOspfNgIfCfgMTU specifies the desired size of the
largest packet which can be sent/received on this OSPF interface,
specified in octets. This size DOES include the underlying IP
header length, but not the underlying layer headers/trailers.
Setting tmnxOspfNgIfCfgMTU to a value of zero (0), causes the agent
to recalculate the default MTU size which can vary based on the
current setting of tmnxPortMode and tmnxPortEncapType variables
for the port to which this OSPF interface is bound.rw Integer32 (0 | 512..9198) .1.3.6.1.4.1.6527.3.1.2.36.31.1.14 |
tmnxOspfNgIfCfgMetricThe value of tmnxOspfNgIfCfgMetric specifies the desired
metric value assigned to this interface. The default value
'0' causes the value of the Metric to be calculated as
(Reference Bandwidth / ifSpeed). The value of the reference
bandwidth is configured by the tmnxOspfReferenceBandwidth object.rw Metric (OSPF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.31.1.15 |
tmnxOspfNgIfPassiveThe value of tmnxOspfNgIfPassive specifies whether or or not HELLOs
are to be sent out on this interface and whether or not the router
advertises it as STUB network/link in its router LSAs. If true, no
HELLOs will be sent, and the interface is advertised as a STUB link.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.31.1.16 |
tmnxOspfNgIfAdvtSubnetThe value of tmnxOspfNgIfAdvtSubnet specifies the advertisement
method. When tmnxOspfNgIfAdvtSubnet is set to 'true', OSPF will
advertise the network number and netmask instead of the
individual host-routes of an active point-to-point interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.31.1.17 |
tmnxOspfNgIfAuthTypeThe value of tmnxOspfNgIfAuthType specifies the authentication
type to use for an interface.
Note that this object can be used to engage in significant attacks
against an OSPF router.rw TmnxOspfAuthenticationType .1.3.6.1.4.1.6527.3.1.2.36.31.1.18 |
tmnxOspfNgIfAuthKeyThe value of tmnxOspfNgIfAuthKey specifies the authentication key
string. The cleartext password is used as an OSPF Authentication
key when simplePassword security is enabled. This object does not
access any OSPF Cryptographic (e.g. MD5) Authentication Key under
any circumstance.
If the key length is shorter than 8 octets, the agent will left
adjust and zero fill to 8 octets.
Unauthenticated interfaces need no authentication key, and simple
password authentication cannot use a key of more than 8 octets.
Note that the use of simplePassword authentication is NOT recommended
when there is concern regarding attack upon the OSPF system.
This authentication is only sufficient to protect against
accidental misconfigurations because it re-uses cleartext passwords.
[RFC-1704]
When read, tmnxOspfNgIfAuthKey always returns an Octet String of
length zero.
This object is valid only when tmnxOspfVersion has a value of
'version2'.rw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.36.31.1.19 |
tmnxOspfNgIfEnableBfdThe value of tmnxOspfNgIfEnableBfd specifies whether Bi-directional
Forwarding Detection is enabled for Ipv4 in this OSPF interface.
When the value is 'true', this interface can establish BFD sessions
and use BFD as a signalling mechanism. When it is 'false', it cannot
use BFD for Ipv4.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.31.1.20 |
tmnxOspfNgIfRemainDownOnFailThe value of tmnxOspfNgIfRemainDownOnFail specifies whether an OSPF
adjacency should go down when the BFD session to the peer goes
down.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.31.1.21 |
tmnxOspfNgIfInboundSANameThe value of tmnxOspfNgIfInboundSAName specifies the manually
configured IPsec Security Association name in case the Ospfv3 traffic
on the [interface] has to be authenticated.
This object is only valid when tmnxOspfVersion has a value of
'version3'.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.31.1.22 |
tmnxOspfNgIfOutboundSANameThe value of tmnxOspfNgIfOutboundSAName specifies the manually
configured IPsec Security Association name in case the Ospfv3 traffic
on the [interface] has to be authenticated.
This object is only valid when tmnxOspfVersion has a value of
'version3'.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.31.1.23 |
tmnxOspfNgIfLoopfreeAltExcludeThe value of tmnxOspfNgIfLoopfreeAltExclude specifies whether or not
the OSPF interface should be excluded during LFA calculations. If the
value is 'true', the OSPF interface is excluded from LFA calculations.
If the value is 'false', the OSPF interface is included in LFA
calculations.
The value of tmnxOspfNgIfLoopfreeAltExclude is only valid when
tmnxOspfLoopfreeAlternate has a value of 'true'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.31.1.24 |
tmnxOspfNgIfOperTableThe tmnxOspfNgIfOperTable provides an extension of the
tmnxOspfNgIfTable for operational states of an OSPF interface. SEQUENCE OF TmnxOspfNgIfOperEntry .1.3.6.1.4.1.6527.3.1.2.36.32 |
tmnxOspfNgIfOperEntryEach row entry in the tmnxOspfNgIfOperTable represents
additional columns for statistics for an OSPF interface. TmnxOspfNgIfOperEntry .1.3.6.1.4.1.6527.3.1.2.36.32.1 |
tmnxOspfNgIfStateThe OSPF Interface State.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.36.32.1.1 |
tmnxOspfNgIfLastEnabledTimeThe value of tmnxOspfNgIfLastEnabledTime indicates the sysUpTime
value when ospfIfAdminStat was last set to enabled (1) to
run the ospf on this interface.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.32.1.2 |
tmnxOspfNgIfOperMTUThe value of tmnxOspfNgIfOperMTU indicates the operational size
of the largest packet which can be sent/received on this OSPF
interface, specified in octets.
This size DOES include the underlying IP header length,
but not the underlying layer headers/trailers.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.36.32.1.3 |
tmnxOspfNgIfMetricValueThe value of tmnxOspfNgIfMetricValue indicates the metric value
this interface is using. The default value of the Metric is
(Reference Bandwidth / ifSpeed). The value of the reference
bandwidth is configured by the tmnxOspfReferenceBandwidth object.ro Metric (OSPF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.32.1.4 |
tmnxOspfNgIfDRIdThe value of tmnxOspfNgIfDRId indicates the Router ID of the
Designated Router.ro TmnxOspfRouterIdTc .1.3.6.1.4.1.6527.3.1.2.36.32.1.5 |
tmnxOspfNgIfDRIpAddrTypeThe value of tmnxOspfNgIfDRIpAddrType type indicates the IP address
type of tmnxOspfNgIfDRIpAddr. For IPv6 type addresses only addresses
with zone index are expected.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.36.32.1.6 |
tmnxOspfNgIfDRIpAddrThe value of tmnxOspfNgIfDRIpAddr indicates the IP address of
the Designated Router.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.36.32.1.7 |
tmnxOspfNgIfBDRIdThe value of tmnxOspfNgIfBDRId indicates the Router ID of the
Backup Designated Router.ro TmnxOspfRouterIdTc .1.3.6.1.4.1.6527.3.1.2.36.32.1.8 |
tmnxOspfNgIfBDRIpAddrTypeThe value of tmnxOspfNgIfBDRIpAddrType indicates the IP address
type of the Backup Designated Router. For IPv6 type addresses
only addresses with zone index are expected.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.36.32.1.9 |
tmnxOspfNgIfBDRIpAddrThe value of tmnxOspfNgIfBDRIpAddr indicates the IP address of
the Backup Designated Router.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.36.32.1.10 |
tmnxOspfNgIfLinkLsaCountThe value of tmnxOspfNgIfLinkLsaCount indicates the total
number of Link-Scope link-state advertisements in this link's
link-state database.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.32.1.11 |
tmnxOspfNgIfLinkLsaCksumSumThe value of tmnxOspfNgIfLinkLsaCksumSum indicates the 32-bit
unsigned sum of the Link-Scope link-state advertisements' LS
checksums contained in this link's link-state database. The
sum can be used to determine if there has been a change in a
router's link-state database, and to compare the link state
database of two routers.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.36.32.1.12 |
tmnxOspfNgIfMD5TransmitKeyIdThe value of tmnxOspfNgIfMD5TransmitKeyId indicates the index value
used to access the row entry in the tmnxOspfNgIfMD5KeyTable that
specifies the authentication type and key transmitted on this
OSPF interface. This object is valid only when tmnxOspfVersion
has the value 'version2'.
If tmnxOspfNgIfMD5TransmitKeyId has a value of 0, it means that no
keys are configured.ro TmnxOspfIfMD5KeyId .1.3.6.1.4.1.6527.3.1.2.36.32.1.13 |
tmnxOspfNgIfLocalIpAddressTypeThe value of tmnxOspfNgIfLocalIpAddressType indicates the IP address
type of tmnxOspfNgIfLocalIpAddress. For IPv6 type addresses only
addresses with zone index are expected.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.36.32.1.14 |
tmnxOspfNgIfLocalIpAddressThe value of tmnxOspfNgIfLocalIpAddress indicates the IP address of
this OSPF local link interface.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.36.32.1.15 |
tmnxOspfNgIfMD5NumKeysThe value of tmnxOspfNgIfMD5NumKeys indicates the number of MD5 Key
entries for this OSPF interface.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.32.1.16 |
tmnxOspfNgIfTypeThe value of tmnxOspfNgIfType indicates the operational
OSPF interface type.ro TmnxOspfIfTypeTc .1.3.6.1.4.1.6527.3.1.2.36.32.1.17 |
tmnxOspfNgIfTeMetricThe value of tmnxOspfNgIfTeMetric indicates
the MPLS TE metric configured for this interface. This metric is
flooded out in the TE metric sub-tlv in the OSPF TE LSAs.
Depending on the configuration, either the TE metric
value or the native OSPF metric value is used in CSPF computations.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.32.1.18 |
tmnxOspfNgIfTeStateThe value of tmnxOspfNgIfTeState indicates the MPLS interface TE status
from OSPF standpoint.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.32.1.19 |
tmnxOspfNgIfAdminGroupThe value of tmnxOspfNgIfAdminGroup indicates the bit-map inherited
from MPLS interface that identifies the admin groups to which this
interface belongs. If bit 'n' is set, then the interface belongs to
the admin group with value 'n'.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.32.1.20 |
tmnxOspfNgIfLdpSyncStateThe value of tmnxOspfNgIfLdpSyncState indicates if IGP-LDP
synchronization is enabled on this interface. tmnxOspfNgIfLdpSyncState
is derived from tmnxOspfLdpSyncAdminState and also whether it was
enabled at the IP layer from OSPF standpoint.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.32.1.21 |
tmnxOspfNgIfLdpSyncMaxMetricThe value of tmnxOspfNgIfLdpSyncMaxMetric indicates if OSPF
advertised maximum metric value for the interface, depending on
whether tmnxOspfNgIfLdpSyncState is enabled on this interface.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.32.1.22 |
tmnxOspfNgIfLdpSyncTimerStateThe value of tmnxOspfNgIfLdpSyncTimerState indicates the state of the
tmnxOspfNgIfLdpSyncTimeLeft on this OSPF interface.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.36.32.1.23 |
tmnxOspfNgIfLdpSyncTimeLeftThe value of tmnxOspfNgIfLdpSyncTimeLeft indicates the time left
before OSPF reverts back to advertising normal metric for this
interface. This is applicable only when tmnxOspfNgIfLdpSyncMaxMetric
is 'true'.ro Unsigned32 (0|1..1800) UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.32.1.24 |
tmnxOspfNgIfOperInbSANameThe value of tmnxOspfNgIfOperInbSAName indicates the name of the
operational inbound manual IPsec Security Association, used for
authenticating inbound Ospfv3 traffic.ro TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.32.1.25 |
tmnxOspfNgIfOperInbSANameTempThe value of tmnxOspfNgIfOperInbSANameTemp indicates the name of a
temporary operational inbound manual IPsec Security Association, used
for authenticating inbound Ospfv3 traffic.
This field can only contain a value when the key-rollover mechanism is
ongoing.ro TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.32.1.26 |
tmnxOspfNgIfOperOutbSANameThe value of tmnxOspfNgIfOperOutbSAName indicates the name of the
operational outbound manual IPsec Security Association, used for
authenticating outbound Ospfv3 traffic. When the key-rollover mechanism
is ongoing, the value can temporarely be different from the value of
the tmnxOspfNgIfOutboundSAName field.ro TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.36.32.1.27 |
tmnxOspfNgIfStatsTableThe tmnxOspfNgIfStatsTable provides an extension of the
tmnxOspfNgIfTable for statistics for an OSPF interface. SEQUENCE OF TmnxOspfNgIfStatsEntry .1.3.6.1.4.1.6527.3.1.2.36.33 |
tmnxOspfNgIfStatsEntryEach row entry in the tmnxOspfNgIfStatsTable represents
additional columns for statistics for an OSPF interface. TmnxOspfNgIfStatsEntry .1.3.6.1.4.1.6527.3.1.2.36.33.1 |
tmnxOspfNgIfEventsThe value of tmnxOspfNgIfEvents indicates the number of times
this OSPF interface has changed its state, or an error has occurred.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.1 |
tmnxOspfNgIfTxPacketsThe value of tmnxOspfNgIfTxPackets indicates the total number of
OSPF packets transmitted on this interface since tmnxOspfAdminState
was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.2 |
tmnxOspfNgIfTxHellosThe value of tmnxOspfNgIfTxHellos indicates the total number
of OSPF Hello packets transmitted on this interface since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.3 |
tmnxOspfNgIfTxDBDsThe value of tmnxOspfNgIfTxDBDs indicates the total number
of OSPF Database Description packets transmitted on this
interface since tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.4 |
tmnxOspfNgIfTxLSRsThe value of tmnxOspfNgIfTxLSRs indicates the total number
of OSPF Link State Requests (LSRs)transmitted on this
interface since tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.5 |
tmnxOspfNgIfTxLSUsThe value of tmnxOspfNgIfTxLSUs indicates the total number
of OSPF Link State Updates (LSUs) transmitted on this
interface since tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.6 |
tmnxOspfNgIfTxLSAcksThe value of tmnxOspfNgIfTxLSAcks indicates the total number
of OSPF Link State Acknowledgements transmitted on this
interface since tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.7 |
tmnxOspfNgIfRxPacketsThe value of tmnxOspfNgIfRxPackets indicates the total number of
OSPF packets received on this interface since tmnxOspfAdminState was
last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.8 |
tmnxOspfNgIfRxHellosThe value of tmnxOspfNgIfRxHellos indicates the total number of
OSPF Hello packets received on this interface since tmnxOspfAdminState
was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.9 |
tmnxOspfNgIfRxDBDsThe value of tmnxOspfNgIfRxDBDs indicates the total number of
OSPF Database Description packets received on this interface since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.10 |
tmnxOspfNgIfRxLSRsThe value of tmnxOspfNgIfRxLSRs indicates the total number of
Link State Requests (LSRs) received on this interface since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.11 |
tmnxOspfNgIfRxLSUsThe value of tmnxOspfNgIfRxLSUs indicates the total number of
Link State Updates (LSUs) received on this interface since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.12 |
tmnxOspfNgIfRxLSAcksThe value of tmnxOspfNgIfRxLSAcks indicates the total number of
Link State Acknowledgements received on this interface since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.13 |
tmnxOspfNgIfDiscardPacketsThe value of tmnxOspfNgIfDiscardPackets indicates the total number
of OSPF packets discarded on this interface since tmnxOspfAdminState
was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.14 |
tmnxOspfNgIfRetransmitOutsThe value of tmnxOspfNgIfRetransmitOuts indicates the total number
of OSPF Retransmits sent on this interface since tmnxOspfAdminState was
last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.15 |
tmnxOspfNgIfBadVersionsThe value of tmnxOspfNgIfBadVersions indicates the total number of
OSPF packets received with bad OSPF version numbers since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.16 |
tmnxOspfNgIfBadNetworksThe value of tmnxOspfNgIfBadNetworks indicates the total number of
OSPF packets received with invalid network or mask since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.17 |
tmnxOspfNgIfBadVirtualLinksThe value of tmnxOspfNgIfBadVirtualLinks indicates the total number
of OSPF packets received on this interface that are destined to a
virtual link that does not exist since tmnxOspfAdminState was last set
to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.18 |
tmnxOspfNgIfBadAreasThe value of tmnxOspfNgIfBadAreas indicates the total number of OSPF
packets received with an area mismatch
since tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.19 |
tmnxOspfNgIfBadDstAddrsThe value of tmnxOspfNgIfBadDstAddrs indicates the total number
of OSPF packets received with the incorrect IP destination address
since tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.20 |
tmnxOspfNgIfBadNeighborsThe value of tmnxOspfNgIfBadNeighbors indicates the total number
of OSPF packets received where the neighbor
information does not match the information this router has
for the neighbor since tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.21 |
tmnxOspfNgIfBadPacketTypesThe value of tmnxOspfNgIfBadPacketTypes indicates the total number
of OSPF packets received with an invalid OSPF packet type since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.22 |
tmnxOspfNgIfNeighborCountThe value of tmnxOspfNgIfNeighborCount indicates the total number of
OSPF neighbors adjacent on this interface, in a state of INIT or
greater, since tmnxOspfAdminState was last set to 'enabled'.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.23 |
tmnxOspfNgIfLastEventTimeThe value of tmnxOspfNgIfLastEventTime indicates the value of
sysUpTime when an event was last associated with this OSPF
interface.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.33.1.24 |
tmnxOspfNgIfBadLengthsThe value of tmnxOspfNgIfBadLengths indicates the total number
of OSPF packets received on this interface with a total length
not equal to the length given in the packet itself since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.25 |
tmnxOspfNgIfBadHelloIntervalsThe value of tmnxOspfNgIfBadHelloIntervals indicates the
total number of OSPF packets received where the hello interval
given in packet was not equal to that configured on this interface
since tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.26 |
tmnxOspfNgIfBadDeadIntervalsThe value of tmnxOspfNgIfBadDeadIntervals indicates the
total number of OSPF packets received where the dead interval
given in the packet was not equal to that configured on this
interface since tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.27 |
tmnxOspfNgIfBadOptionsThe value of tmnxOspfNgIfBadOptions indicates the total number
of OSPF packets received with an option that does not match
those configured for this interface or area since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.28 |
tmnxOspfNgIfRxBadChecksumsThe value of tmnxOspfNgIfRxBadChecksums indicates the count
of LSAs received with bad checksums.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.29 |
tmnxOspfNgIfBadAuthTypesThe value of tmnxOspfNgIfBadAuthTypes indicates the total
number of OSPF packets received with an invalid authorization
type since tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.30 |
tmnxOspfNgIfAuthFailuresThe value of tmnxOspfNgIfAuthFailures indicates the total
number of OSPF packets received with an invalid authorization
key since tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.33.1.31 |
tmnxOspfNgNbrTableThe tmnxOspfNgNbrTable contains information about non-virtual
neighbors. SEQUENCE OF TmnxOspfNgNbrEntry .1.3.6.1.4.1.6527.3.1.2.36.34 |
tmnxOspfNgNbrEntryThe tmnxOspfNgNbrEntry contains information regarding a single
non-virtual neighbor. TmnxOspfNgNbrEntry .1.3.6.1.4.1.6527.3.1.2.36.34.1 |
tmnxOspfNgNbrIfIndexThe value of tmnxOspfNgNbrIfIndex specifies the local link ID of
the link over which the neighbor can be reached. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.34.1.1 |
tmnxOspfNgNbrIfInstIdThe value of tmnxOspfNgNbrIfInstId specifies the interface instance
over which the neighbor can be reached. This ID has local link
significance only. TmnxOspfIfInstIdTc .1.3.6.1.4.1.6527.3.1.2.36.34.1.2 |
tmnxOspfNgNbrIfAreaIdThe value of tmnxOspfNgNbrIfAreaId specifies the OSPF Area Identifier. TmnxOspfAreaIdTc .1.3.6.1.4.1.6527.3.1.2.36.34.1.3 |
tmnxOspfNgNbrRtrIdThe value of tmnxOspfNgNbrRtrId specifies a 32-bit integer uniquely
identifying the neighboring router in the Autonomous System. TmnxOspfRouterIdTc .1.3.6.1.4.1.6527.3.1.2.36.34.1.4 |
tmnxOspfNgNbrAddressTypeThe value of tmnxOspfNgNbrAddressType indicates the address type of
tmnxOspfNgNbrAddress. For addresses of IPv6 type only addresses
with zone index are expected.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.36.34.1.5 |
tmnxOspfNgNbrAddressThe value of tmnxOspfNgNbrAddress indicates the IP address of the
neighbor associated with the local link.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.36.34.1.6 |
tmnxOspfNgNbrOptionsThe value of tmnxOspfNgNbrOptions indicates a Bit Mask corresponding
to the neighbor's options field.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.36.34.1.7 |
tmnxOspfNgNbrPriorityThe value of tmnxOspfNgNbrPriority indicates the priority of this
neighbor in the designated router election algorithm. The value
0 signifies that the neighbor is not eligible to become the
designated router on this particular network.ro DesignatedRouterPriority (OSPF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.34.1.8 |
tmnxOspfNgNbrStateThe value of tmnxOspfNgNbrState indicates the State of the
relationship with this Neighbor.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.36.34.1.9 |
tmnxOspfNgNbrHelloSuppressedThe value of tmnxOspfNgNbrHelloSuppressed indicates whether Hellos
are being suppressed to the neighbor.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.34.1.10 |
tmnxOspfNgNbrIfIdThe value of tmnxOspfNgNbrIfId indicates the interface ID that the
neighbor advertises in its Hello Packets on this link, that is, the
neighbor's local interface index.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.34.1.11 |
tmnxOspfNgNbrRestartHelperStatusThe value of tmnxOspfNgNbrRestartHelperStatus indicates whether
the router is acting as a Graceful restart helper for the neighbor.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.36.34.1.12 |
tmnxOspfNgNbrRestartHelperAgeThe value of tmnxOspfNgNbrRestartHelperAge indicates the remaining
time in the current OSPF Graceful restart interval, if the router
is acting as a restart helper for the neighbor.ro TmnxOspfUpToRefreshIntervalTc UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.34.1.13 |
tmnxOspfNgNbrRestartHelperExitRcThe value of tmnxOspfNgNbrRestartHelperExitRc indicates the outcome
of the last attempt at acting as a Graceful restart helper for the
neighbor.
none No restart has yet been attempted.
inProgress A restart attempt is currently underway.
completed The last restart completed successfully.
timedOut The last restart timed out.
topologyChanged The last restart was aborted due to
a topology change.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.36.34.1.14 |
tmnxOspfNgNbrUpTimeThe value of tmnxOspfNgNbrUpTime indicates the uninterrupted time,
in hundredths of seconds, the adjacency to this neighbour
has been up.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.34.1.15 |
tmnxOspfNgNbrLastEventTimeThe value of tmnxOspfNgNbrLastEventTime indicates the value of
sysUpTime when the last event occurred that affected the adjacency
to the neighbour.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.34.1.16 |
tmnxOspfNgNbrDeadTimeOutstandingThe value of tmnxOspfNgNbrDeadTimeOutstanding indicates the amount
of time in seconds until the dead-router interval expires. Normally,
this value should not be significantly smaller than the configured
dead router interval minus one hello interval.ro Unsigned32 (0..'7FFFFFFF'h) UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.36.34.1.17 |
tmnxOspfNgNbrLastRestartTimeThe value of tmnxOspfNgNbrLastRestartTime indicates the last time the
neighbor attempted restart.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.34.1.18 |
tmnxOspfNgNbrRestartReasonThe value of tmnxOspfNgNbrRestartReason indicates the OSPF
neighbor's graceful restart reason.ro TmnxOspfRestartReasonTc .1.3.6.1.4.1.6527.3.1.2.36.34.1.19 |
tmnxOspfNgNbrBfdTrackingThe value of tmnxOspfNgNbrBfdTracking indicates whether a BFD
session is being maintained to track the forwarding path to
this neighbor or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.34.1.20 |
tmnxOspfNgNbrDrIdThe value of tmnxOspfNgNbrDrId indicates the DR value advertised
in the HELLO packets received from the OSPF neighbor.
If it is not a broadcast interface tmnxOspfNgNbrDrId will be zero.ro TmnxOspfRouterIdTc .1.3.6.1.4.1.6527.3.1.2.36.34.1.21 |
tmnxOspfNgNbrBdrIdThe value of tmnxOspfNgNbrBdrId indicates the BDR value advertised
in the HELLO packets received from the OSPF neighbor.
If it is not a broadcast interface tmnxOspfNgNbrBdrId will be zero.ro TmnxOspfRouterIdTc .1.3.6.1.4.1.6527.3.1.2.36.34.1.22 |
tmnxOspfNgNbrStatsTableThe tmnxOspfNgNbrStatsTable provides an extension of the
tmnxOspfNgNbrTable for statistics for an OSPF neighbor. SEQUENCE OF TmnxOspfNgNbrStatsEntry .1.3.6.1.4.1.6527.3.1.2.36.35 |
tmnxOspfNgNbrStatsEntryEach row entry in the tmnxOspfNgNbrStatsTable represents
additional columns for statistics for an OSPF neighbor. TmnxOspfNgNbrStatsEntry .1.3.6.1.4.1.6527.3.1.2.36.35.1 |
tmnxOspfNgNbrEventsThe value of tmnxOspfNgNbrEvents indicates the number of times
this neighbor relationship has changed state, or an error has
occurred.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.35.1.1 |
tmnxOspfNgNbrLsRetransQLenThe value of tmnxOspfNgNbrLsRetransQLen indicates the current
length of the retransmission queue.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.35.1.2 |
tmnxOspfNgNbrBadNbrStatesThe value of tmnxOspfNgNbrBadNbrStates indicates the total number
of OSPF packets received when the neighbor state was not
expecting to receive this packet type since tmnxOspfAdminState
was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.35.1.3 |
tmnxOspfNgNbrLsaInstallFailedThe value of tmnxOspfNgNbrLsaInstallFailed indicates the total number
of times an LSA could not be installed into the LSDB due to
a resource allocation issue since tmnxOspfAdminState was last set
to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.35.1.4 |
tmnxOspfNgNbrBadSeqNumsThe value of tmnxOspfNgNbrBadSeqNums indicates the total number
of times when a database description packet was received with a
sequence number mismatch since tmnxOspfAdminState was last
set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.35.1.5 |
tmnxOspfNgNbrBadMTUsThe value of tmnxOspfNgNbrBadMTUs indicates the total number of times
when the MTU in a received database description packet was
larger than the MTU of the receiving interface since
tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.35.1.6 |
tmnxOspfNgNbrBadPacketsThe value of tmnxOspfNgNbrBadPackets indicates the total number
of times when an LS update was received with an illegal LS type or an
option mismatch since tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.35.1.7 |
tmnxOspfNgNbrLsaNotInLsdbsThe value of tmnxOspfNgNbrLsaNotInLsdbs indicates the total number of
times when an LS request was received for an LSA not installed in the
LSDB of this router since tmnxOspfAdminState was last set to
'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.35.1.8 |
tmnxOspfNgNbrOptionMismatchesThe value of tmnxOspfNgNbrOptionMismatches indicates the total
number of times when a LS update was received with an option mismatch
since tmnxOspfAdminState was last set to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.35.1.9 |
tmnxOspfNgNbrDuplicatesThe value of tmnxOspfNgNbrDuplicates indicates the total number
of times when a duplicate database description packet was received
during the Exchange state since tmnxOspfAdminState was last set
to 'enabled'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.35.1.10 |
tmnxOspfNgNbrNumRestartsThe value of tmnxOspfNgNbrNumRestarts indicates the number of times
the neighbor has attempted restart.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.36.35.1.11 |
tmnxOspfNgIfMD5KeyTableThe tmnxOspfNgIfMD5KeyTable contains a list of MD5 keys to be used
to authenticate OSPFv2 packets. SEQUENCE OF TmnxOspfNgIfMD5KeyEntry .1.3.6.1.4.1.6527.3.1.2.36.36 |
tmnxOspfNgIfMD5KeyEntryEach row entry represents a MD5 key to be used to authenticate
a OSPFv2 packet addressed to a particular OSPF IP address.
Entries can be created and deleted via SNMP SET operations.
Creation requires a SET request containing at least
tmnxOspfNgIfMD5KeyKey and tmnxOspfNgIfMD5KeyStatus. TmnxOspfNgIfMD5KeyEntry .1.3.6.1.4.1.6527.3.1.2.36.36.1 |
tmnxOspfNgIfMD5KeyIndexThe value of tmnxOspfNgIfMD5KeyIndex provides a unique identifier
for a key to be used for authentication on a specific OSPFv2
IP address.
If tmnxOspfNgIfMD5KeyIndex has a value of 0, it means that no
keys are configured. TmnxOspfIfMD5KeyId .1.3.6.1.4.1.6527.3.1.2.36.36.1.1 |
tmnxOspfNgIfMD5KeyStatusThe object tmnxOspfNgIfMD5KeyStatus is the RowStatus used for
creation, deletion, or control of tmnxOspfNgIfMD5KeyTable entries.
Before the row can be placed into the 'active' state,
tmnxOspfNgIfMD5KeyKey must have been assigned a value.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.36.1.2 |
tmnxOspfNgIfMD5KeyKeyThe value of tmnxOspfNgIfMD5KeyKey specifies the MD5 authentication
key to be used on this OSPFv2 IP address.
When read, tmnxOspfNgIfMD5KeyKey always returns an OCTET STRING of
length zero.rw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.36.36.1.3 |
tmnxOspfNgIfMD5KeyStartTimeThe value of tmnxOspfNgIfMD5KeyStartTime specifies the date and
time when this MD5 authentication key becomes valid for use.
If no date and time is set, represented by a DateAndTime string
with 0 length, the key is valid by default.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.36.1.4 |
tmnxOspfNgIfMD5KeyStopTimeThe value of tmnxOspfNgIfMD5KeyStopTime specifies the date and
time when this MD5 authentication key becomes invalid for use.
If no date and time is set, represented by a DateAndTime string
with 0 length, the key is valid indefinitely.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.36.36.1.5 |
tmnxOspfLfaStatsTableThe tmnxOspfLfaStatsTable maintains information on loopfree-alternate
(LFA) coverage for each instance of OSPF protocol. SEQUENCE OF TmnxOspfLfaStatsEntry .1.3.6.1.4.1.6527.3.1.2.36.37 |
tmnxOspfLfaStatsEntryEach row entry in the tmnxOspfLfaStatsTable represents information on
LFA coverage for a given OSPF area TmnxOspfLfaStatsEntry .1.3.6.1.4.1.6527.3.1.2.36.37.1 |
tmnxOspfLfaNodesCoveredThe value of tmnxOspfLfaNodesCovered indicates in absolute numbers the
number of nodes for which an LFA is found.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.37.1.1 |
tmnxOspfLfaTotalNodesThe value of tmnxOspfLfaTotalNodes indicates in absolute numbers the
number of nodes eligible for LFA calculation.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.37.1.2 |
tmnxOspfLfaCoverageThe value of tmnxOspfLfaCoverage indicates how much LFA coverage
is being obtained for the set of available LFA eligible nodes.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.37.1.3 |
tmnxOspfLfaPfxCoveredThe value of tmnxOspfLfaPfxCovered indicates in absolute numbers the
number of prefixes for which an LFA is found.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.37.1.4 |
tmnxOspfLfaTotalPfxThe value of tmnxOspfLfaTotalPfx indicates in absolute numbers the
number of prefixes eligible for LFA calculation.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.37.1.5 |
tmnxOspfLfaPfxCoverageThe value of tmnxOspfLfaPfxCoverage indicates how much LFA prefix
coverage is being obtained for the set of available LFA eligible
prefixes.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.36.37.1.6 |
tmnxOspfPathTableThe tmnxOspfPathTable maintains information regarding LFA calculations
for each instance of OSPF protocol. SEQUENCE OF TmnxOspfPathEntry .1.3.6.1.4.1.6527.3.1.2.36.38 |
tmnxOspfPathEntryEach row entry in the tmnxOspfPathTable TmnxOspfPathEntry .1.3.6.1.4.1.6527.3.1.2.36.38.1 |
tmnxOspfPathDestRouterIdThe value of tmnxOspfPathDestRouterId indicates the destination node
associated with this entry. TmnxOspfRouterIdTc .1.3.6.1.4.1.6527.3.1.2.36.38.1.1 |
tmnxOspfPathIfIndexThe value of tmnxOspfPathIfIndex indicates the ifIndex of the outgoing
interface for the route. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.38.1.2 |
tmnxOspfPathNhopRouterIdThe value of tmnxOspfPathNhopRouterId indicates the next hop through
which this route is reachable. TmnxOspfRouterIdTc .1.3.6.1.4.1.6527.3.1.2.36.38.1.3 |
tmnxOspfPathMetricThe value of tmnxOspfPathMetric indicates the metric assigned to this
entry after SPF calculations. The lower the metric value, the shorter
is the path and hence more preferred by the protocol.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.38.1.4 |
tmnxOspfPathLfaIfIndexThe value of tmnxOspfPathLfaIfIndex indicates the loopfree-alternate
ifIndex of the outgoing interface for the LFA path.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.36.38.1.5 |
tmnxOspfPathLfaTypeThe value of tmnxOspfPathLfaType indicates the level of LFA protection
represented by this row entry.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.36.38.1.6 |
tmnxOspfPathLfaNhopRouterIdThe value of tmnxOspfPathLfaNhopRouterId indicates the next-hop node in
this loopfree-alternate path to reach a given destination node. The
value of tmnxOspfPathLfaNhopRouterId is valid only if
tmnxOspfPathLfaType has a non-zero value.ro TmnxOspfRouterIdTc .1.3.6.1.4.1.6527.3.1.2.36.38.1.7 |
tmnxOspfPathLfaMetricThe value of tmnxOspfPathLfaMetric indicates the metric assigned to
this entry after LFA calculations. The lower the metric value, the
shorter is the path and hence more preferred by the protocol. The
value of tmnxOspfPathLfaMetric is valid only if tmnxOspfPathLfaType
has a non-zero value.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.36.38.1.8 |
tmnxOspfNotifyPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.36 |
tmnxOspfNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.36.0 |
tmnxOspfVirtIfStateChangeA tmnxOspfVirtIfStateChange notification is generated when there
has been a change in the state of an OSPF virtual interface.
This notification should be generated when the interface state
regresses (e.g., goes from Point-to-Point to Down) or progresses
to a terminal state (i.e., Point-to-Point). NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.1 |
tmnxOspfNbrStateChangeThis notification is obsoleted in release 9.0. It is replaced with
tmnxOspfNgNbrStateChange. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.2 |
tmnxOspfVirtNbrStateChangeA tmnxOspfVirtNbrStateChange notification is generated when there
has been a change in the state of an OSPF virtual neighbor. This
notification should be generated when the neighbor state regresses
(e.g., goes from Attempt or Full to 1-Way or Down) or progresses to
a terminal state (e.g., Full). NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.3 |
tmnxOspfIfConfigErrorThis notification is obsoleted in release 9.0. It is replaced with
tmnxOspfNgIfConfigError. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.4 |
tmnxOspfVirtIfConfigErrorA tmnxOspfVirtIfConfigError notification is generated when a
packet has been received on a virtual interface from a router whose
configuration parameters conflict with this router's configuration
parameters. Note that the event 'optionMismatch' should cause a
notification only if it prevents an adjacency from forming. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.5 |
tmnxOspfIfAuthFailureThis notification is obsoleted in release 9.0. It is replaced with
tmnxOspfNgIfAuthFailure. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.6 |
tmnxOspfVirtIfAuthFailureA tmnxOspfVirtIfAuthFailure notification is generated when a
packet has been received on a virtual interface from a router
whose authentication key or authentication type conflicts with
this router's authentication key or authentication type. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.7 |
tmnxOspfIfRxBadPacketThis notification is obsoleted in release 9.0. It is replaced with
tmnxOspfNgIfRxBadPacket. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.8 |
tmnxOspfVirtIfRxBadPacketA tmnxOspfVirtIfRxBadPacket notification is generated when an OSPF
packet that cannot be parsed has been received on a virtual
interface. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.9 |
tmnxOspfIfTxRetransmitThis notification is obsoleted in release 9.0. It is replaced with
tmnxOspfNgIfTxRetransmit. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.10 |
tmnxOspfVirtIfTxRetransmitA tmnxOspfVirtIfTxRetransmit notification is generated when an
OSPF packet has been retransmitted on a virtual interface. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.11 |
tmnxOspfAreaOriginateLsaA tmnxOspfAreaOriginateLsa notification is generated when a new
LSA has been originated by this router. This notification should
not be invoked for simple refreshes of LSAs (which happens every
30 minutes), but instead will only be invoked when an LSA is
(re)originated due to a topology change. Additionally, this
notification does not include LSAs that are being flushed because
they have reached 'MaxAge'. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.12 |
tmnxOspfAreaMaxAgeLsaA tmnxOspfAreaMaxAgeLsa notification is generated when one of
the LSAs in the router's link-state database has aged to 'MaxAge'. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.13 |
tmnxOspfLsdbOverflowA tmnxOspfLsdbOverflow notification is generated when the
number of LSAs in the router's link-state database has
exceeded limit indicated by tmnxOspfExtLsdbLimit. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.14 |
tmnxOspfLsdbApproachingOverflowA tmnxOspfLsdbApproachingOverflow notification is generated
when the number of LSAs in the router's link-state database
has exceeded ninety percent of the value indicated by
tmnxOspfExtLsdbLimit. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.15 |
tmnxOspfIfStateChangeThis notification is obsoleted in release 9.0. It is replaced with
tmnxOspfNgIfStateChange. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.16 |
tmnxOspfNssaTranslatorStatusChgA tmnxOspfNssaTranslatorStatusChg notification is generated
when there has been a change in the router's ability to translate
OSPF type-7 LSAs into OSPF type-5 LSAs. This notification should be
generated when the Translator Status transitions from or to any
defined status on a per area basis. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.17 |
tmnxOspfRestartStatusChangeA tmnxOspfRestartStatusChange notification is generated when
there has been a change in the graceful restart state for the
router. This notification should be generated when the router
restart status changes. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.18 |
tmnxOspfNbrRestartHlprStsChgThis notification is obsoleted in release 9.0. It is replaced with
tmnxOspfNgNbrRestartHlprStsChg. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.19 |
tmnxOspfVirtNbrRestartHlprStsChgAn tmnxOspfVirtNbrRestartHlprStsChg notification is
generated when there has been a change in the graceful restart
helper state for the virtual neighbor. This notification should
be generated when the virtual neighbor restart helper status
transitions for a virtual neighbor. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.20 |
tmnxOspfSpfRunsStoppedA tmnxOspfSpfRunsStopped trap signifies that there
are insufficient memory resources on the system to
run the SPF to completion. Consequently, OSPF will
stop running SPFs until enough memory resources become
available. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.21 |
tmnxOspfSpfRunsRestartedA tmnxOspfSpfRunsRestarted trap signifies that there
are sufficient memory resources on the system to start
running the SPF to completion. Consequently, OSPF will
resume running the SPFs as required. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.22 |
tmnxOspfOverloadEnteredA tmnxOspfOverloadEntered trap is sent out when OSPF
enters the overload state. tmnxOspfLastOverloadEnterCode
holds the condition which caused OSPF to get into overload NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.23 |
tmnxOspfOverloadExitedA tmnxOspfOverloadExited trap is sent out when OSPF
exits the overload state. tmnxOspfLastOverloadExitCode
holds the condition which caused OSPF to get out of overload NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.24 |
tmnxOspfAsOriginateLsaA tmnxOspfAsOriginateLsa notification is generated when a new
LSA has been originated by this router. This notification should
not be invoked for simple refreshes of LSAs (which happens every
30 minutes), but instead will only be invoked when an LSA is
(re)originated due to a topology change. Additionally, this
notification does not include LSAs that are being flushed because
they have reached 'MaxAge'. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.25 |
tmnxOspfAsMaxAgeLsaA tmnxOspfAsMaxAgeLsa notification is generated when one of
the LSAs in the router's link-state database has aged to 'MaxAge'. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.26 |
tmnxOspfLinkOriginateLsaThis notification is obsoleted in release 9.0. It is replaced with
tmnxOspfNgLinkOriginateLsa. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.27 |
tmnxOspfLinkMaxAgeLsaThis notification is obsoleted in release 9.0. It is replaced with
tmnxOspfNgLinkMaxAgeLsa. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.28 |
tmnxOspfLdpSyncTimerStartedThis notification is obsoleted in release 9.0. It is replaced with
tmnxOspfNgLdpSyncTimerStarted. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.29 |
tmnxOspfLdpSyncExitThis notification is obsoleted in release 9.0. It is replaced with
tmnxOspfNgLdpSyncExit. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.30 |
tmnxOspfShamIfStateChangeA tmnxOspfShamIfStateChange notification is generated when there
has been a change in the state of an OSPF sham link.
This notification should be generated when the interface state
regresses (e.g., goes from Point-to-Point to Down) or progresses
to a terminal state (i.e., Point-to-Point). NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.31 |
tmnxOspfShamNbrStateChangeA tmnxOspfShamNbrStateChange notification is generated when there
has been a change in the state of an OSPF sham link neighbor. This
notification should be generated when the neighbor state regresses
(e.g., goes from Attempt or Full to 1-Way or Down) or progresses to
a terminal state (e.g., Full). NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.32 |
tmnxOspfShamIfConfigErrorA tmnxOspfShamIfConfigError notification is generated when a
packet has been received on a sham link from a router whose
configuration parameters conflict with this router's configuration
parameters. Note that the event 'optionMismatch' should cause a
notification only if it prevents an adjacency from forming. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.33 |
tmnxOspfShamIfAuthFailureA tmnxOspfShamIfAuthFailure notification is generated when a
packet has been received on a sham link from a router
whose authentication key or authentication type conflicts with
this router's authentication key or authentication type. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.34 |
tmnxOspfShamIfRxBadPacketA tmnxOspfShamIfRxBadPacket notification is generated when an OSPF
packet that cannot be parsed has been received on a sham link. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.35 |
tmnxOspfShamIfTxRetransmitA tmnxOspfShamIfTxRetransmit notification is generated when an
OSPF packet has been retransmitted on a sham link. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.36 |
tmnxOspfShamNbrRestartHlprStsChgAn tmnxOspfShamNbrRestartHlprStsChg notification is
generated when there has been a change in the graceful restart
helper state for the sham link neighbor. This notification should
be generated when the sham link neighbor restart helper status
transitions for a sham link neighbor. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.37 |
tmnxOspfFailureDisabledA tmnxOspfFailureDisabled notification is generated when OSPF is
operationally brought down. Reason for the failure is indicated by
tmnxOspfFailureReasonCode. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.38 |
tmnxOspfExportLimitReachedA tmnxOspfExportLimitReached notification is generated when the
configured value of exported routes, tmnxOspfExportLimit is reached.
Additional routes would not be exported into OSPF or OSPF3 from the
route table. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.39 |
tmnxOspfExportLimitWarningA tmnxOspfExportLimitWarning notification is generated when the number
of exported routes is equal to the configured percent,
tmnxOspfExportLimitLogPercent of the export limit, tmnxOspfExportLimit.
Additional routes will continue to be exported into OSPF or OSPF3 from
the route table till the export limit is reached. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.40 |
tmnxOspfRoutesExpLmtDroppedA tmnxOspfRoutesExpLmtDropped notification is generated when the
number of exported routes drops below the export limit,
tmnxOspfExportLimit. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.41 |
tmnxOspfNgNbrStateChangeA tmnxOspfNgNbrStateChange notification is generated when there has
been a change in the state of a non-virtual OSPF neighbor. This
notification should be generated when the neighbor state regresses
(e.g., goes from Attempt or Full to 1-Way or Down) or progresses
to a terminal state (e.g., 2-Way or Full). When an neighbor
transitions from or to Full on non-broadcast multi-access and
broadcast networks, the notification should be generated by the
designated router. A designated router transitioning to Down will
be noted by the tmnxOspfNgIfStateChange notification. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.42 |
tmnxOspfNgIfConfigErrorA tmnxOspfNgIfConfigError notification is generated when a packet has
been received on a non-virtual interface from a router whose
configuration parameters conflict with this router's configuration
parameters. Note that the event 'optionMismatch' should cause a
notification only if it prevents an adjacency from forming. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.43 |
tmnxOspfNgIfAuthFailureA tmnxOspfNgIfAuthFailure notification is generated when a packet
has been received on a non-virtual interface from a router
whose authentication key or authentication type conflicts with this
router's authentication key or authentication type. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.44 |
tmnxOspfNgIfRxBadPacketA tmnxOspfNgIfRxBadPacket notification is generated when an OSPF packet
that cannot be parsed has been received on a non-virtual interface. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.45 |
tmnxOspfNgIfTxRetransmitA tmnxOspfNgIfTxRetransmit notification is generated when an
OSPF packet has been retransmitted on a non-virtual interface. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.46 |
tmnxOspfNgIfStateChangeA tmnxOspfNgIfStateChange notification is generated when there
has been a change in the state of a non-virtual OSPF interface.
This notification should be generated when the interface state
regresses (e.g., goes from Dr to Down) or progresses to a terminal
state (i.e., Point-to-Point, DR Other, Dr, or Backup). NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.47 |
tmnxOspfNgNbrRestartHlprStsChgA tmnxOspfNgNbrRestartHlprStsChg notification is generated
when there has been a change in the graceful restart helper state
for the neighbor. This notification should be generated when the
neighbor restart helper status transitions for a neighbor. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.48 |
tmnxOspfNgLinkOriginateLsaA tmnxOspfNgLinkOriginateLsa notification is generated when a new
LSA has been originated by this router. This notification should
not be invoked for simple refreshes of LSAs (which happens every
30 minutes), but instead will only be invoked when an LSA is
(re)originated due to a topology change. Additionally, this
notification does not include LSAs that are being flushed because
they have reached 'MaxAge'. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.49 |
tmnxOspfNgLinkMaxAgeLsaA tmnxOspfNgLinkMaxAgeLsa notification is generated when one of
the LSAs in the router's link-state database has aged to 'MaxAge'. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.50 |
tmnxOspfNgLdpSyncTimerStartedA notification sent when the tmnxOspfNgIfLdpSyncTimerState is started.
The timer is started from the time the LDP session to the neighbor
is up over the interface. This is to allow for the label FEC bindings
to be exchanged. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.51 |
tmnxOspfNgLdpSyncExitA notification sent when IGP-LDP synchronization has stopped. The
cause of this event is indicated by vRtrIsisIfLdpSyncTimerState, one of
them being expiry of the vRtrIfLdpSyncTimer. The IGP link metric is
restored to normal levels. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.36.0.52 |