TIMETRA-MSDP-MIB
AI MIB Summary
The TIMETRA-MSDP-MIB enables monitoring and configuration of Multicast Source Discovery Protocol (MSDP) adjacencies, peer states, and active source registration on Alcatel-Lucent Service Router Operating System (SROS) platforms. It provides visibility into MSDP session establishment, SA (Source-Active) cache contents, and PIM sparse-mode join propagation between multicast routing domains.
This is the SNMP MIB module to manage and provision MSDP protocol on Alcatel SROS equipment. The Multicast Source Discovery Protocol (MSDP) is used to connect multicast routing domains. It typically runs on the same router as the Protocol Independent Multicast (PIM) sparse-mode rendezvous point (RP). Each MSDP router establishes adjacencies with internal and external MSDP peers similar to the Border Gateway Protocol (BGP). These peer routers inform each other about active sources within the domain. When they detect active sources, the routers can send PIM sparse-mode explicit join messages to the active source.
Copyright 2006-2011 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions.
Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies.
This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Main OID:
timetraMsdpMIBModule.1.3.6.1.4.1.6527.1.1.3.43
189
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
189 total| Object Name |
|---|
timetraMsdpMIBModuleThis is the SNMP MIB module to manage and provision MSDP
protocol on Alcatel SROS equipment. The Multicast Source Discovery
Protocol (MSDP) is used to connect multicast routing domains. It
typically runs on the same router as the Protocol Independent
Multicast (PIM) sparse-mode rendezvous point (RP). Each MSDP
router establishes adjacencies with internal and external MSDP
peers similar to the Border Gateway Protocol (BGP). These peer
routers inform each other about active sources within the domain.
When they detect active sources, the routers can send PIM
sparse-mode explicit join messages to the active source.
Copyright 2006-2011 Alcatel-Lucent. All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel-Lucent's
proprietary intellectual property. Alcatel-Lucent retains
all title and ownership in the Specification, including any
revisions.
Alcatel-Lucent grants all interested parties a non-exclusive
license to use and distribute an unmodified copy of this
Specification in connection with management of Alcatel-Lucent
products, and without fee, provided this copyright notice and
license appear on all copies.
This Specification is supplied 'as is', and Alcatel-Lucent
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.6527.1.1.3.43 |
tmnxMsdpConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.43 |
tmnxMsdpCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.43.1 |
tmnxMsdpGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.43.2 |
tmnxMsdpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.43 |
tmnxMsdpGlobals OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.43.1 |
tmnxMsdpMaxActiveSourcesThe value of tmnxMsdpMaxActiveSources specifies the maximum
number of source active messages that will be accepted by MSDP. This
effectively controls the number of source active messages that can
be stored on the system.
By default, no limit is placed on the number of source active
messages and this is specified by the value '-1'. A value of
0 means that no source active messages will be accepted.rw Integer32 (-1|0..1000000) .1.3.6.1.4.1.6527.3.1.2.43.1.1 |
tmnxMsdpMsgRcvRateThe value of tmnxMsdpMsgRcvRate specifies the number of MSDP
messages (including source active messages) that are read from the
TCP session per tmnxMsdpMsgRcvRateTime seconds.
By default, no MSDP messages are read from the TCP session
and this is specified by the value 0.
Once the number of MSDP packets defined in tmnxMsdpMsgRcvRateThd
have been processed the rate of all other MSDP packets is rate
limited by no longer accepting messages from the TCP session until
tmnxMsdpMsgRcvRateTime seconds have elapsed.rw Unsigned32 (0|10..10000) .1.3.6.1.4.1.6527.3.1.2.43.1.2 |
tmnxMsdpMsgRcvRateTimeThe value of tmnxMsdpMsgRcvRateTime specifies the time in seconds
that together with tmnxMsdpMsgRcvRate defines the number of MSDP
messages (including source active messages) that are read from the
TCP session within the configured number of seconds.
By default, no MSDP messages are read from the TCP session
and this is specified by the value 0.
Once the number of MSDP packets defined in tmnxMsdpMsgRcvRateThd
have been processed the rate of all other MSDP packets is rate
limited by no longer accepting messages from the TCP session until
tmnxMsdpMsgRcvRateTime seconds have elapsed.rw Unsigned32 (0|1..600) UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.43.1.3 |
tmnxMsdpMsgRcvRateThdThe value of tmnxMsdpMsgRcvRateThd specifies the number of
MSDP messages that can be processed before tmnxMsdpMsgRcvRate is
set. This is useful during system startup and initialization.
By default, no MSDP messages are read from the TCP session
and this is specified by the value 0.
Once the number of MSDP packets defined in tmnxMsdpMsgRcvRateThd
have been processed the rate of all other MSDP packets is rate
limited by no longer accepting messages from the TCP session until
tmnxMsdpMsgRcvRateTime seconds have elapsed.rw Gauge32 (0|1..1000000) .1.3.6.1.4.1.6527.3.1.2.43.1.4 |
tmnxMsdpDataEncapsulationThe value of tmnxMsdpDataEncapsulation is used to configure a
rendezvous point (RP) using MSDP to encapsulate multicast data
received in MSDP register messages inside forwarded MSDP
source-active messages.
By default data encapsulation is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.43.1.5 |
tmnxMsdpAdminStateThe value of tmnxMsdpAdminState specifies the desired administrative
state for MSDP. When MSDP is 'outOfService' the operational state of
MSDP as well as the operational state of other entities under it,
like peer or peer group is also disabled.
By default, state of MSDP is 'inService'.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.1.6 |
tmnxMsdpExportPolicy1The value of tmnxMsdpExportPolicy1 specifies the export policy to
export Source Active (SA) state from the SA list into MSDP.
A maximum of five policy names can be specified.
tmnxMsdpExportPolicy1 specifies policy number 1 at the
protocol level.
By default no export policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.1.7 |
tmnxMsdpExportPolicy2The value of tmnxMsdpExportPolicy2 specifies the export policy to
export Source Active (SA) state from the SA list into MSDP.
tmnxMsdpExportPolicy2 specifies policy number 2 at the protocol
level.
By default no export policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.1.8 |
tmnxMsdpExportPolicy3The value of tmnxMsdpExportPolicy3 specifies the export policy to
export Source Active (SA) state from the SA list into MSDP.
tmnxMsdpExportPolicy3 specifies policy number 3 at the protocol level.
By default no export policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.1.9 |
tmnxMsdpExportPolicy4The value of tmnxMsdpExportPolicy4 specifies the export policy to
export Source Active (SA) state from the SA list into MSDP.
tmnxMsdpExportPolicy4 specifies policy number 4 at the protocol level.
By default no export policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.1.10 |
tmnxMsdpExportPolicy5The value of tmnxMsdpExportPolicy5 specifies the export policy to
export Source Active (SA) state from the SA list into MSDP.
tmnxMsdpExportPolicy1 specifies policy number 5 at the protocol level.
By default no export policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.1.11 |
tmnxMsdpImportPolicy1The value of tmnxMsdpImportPolicy1 specifies the import policy to
import Source Active (SA) state from the SA list into MSDP. A
maximum of five policy names can be specified.
tmnxMsdpImportPolicy1 specifies policy number 1 at the protocol level.
By default no import policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.1.12 |
tmnxMsdpImportPolicy2The value of tmnxMsdpImportPolicy2 specifies the import policy to
import Source Active (SA) state from the SA list into MSDP.
tmnxMsdpImportPolicy2 specifies policy number 2 at the protocol level.
By default no import policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.1.13 |
tmnxMsdpImportPolicy3The value of tmnxMsdpImportPolicy3 specifies the import policy to
import Source Active (SA) state from the SA list into MSDP.
tmnxMsdpImportPolicy3 specifies policy number 3 at the protocol level.
By default no import policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.1.14 |
tmnxMsdpImportPolicy4The value of tmnxMsdpImportPolicy4 specifies the import policy to
import Source Active (SA) state from the SA list into MSDP.
tmnxMsdpImportPolicy4 specifies policy number 4 at the protocol level.
By default no import policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.1.15 |
tmnxMsdpImportPolicy5The value of tmnxMsdpImportPolicy5 specifies the import policy to
import Source Active (SA) state from the SA list into MSDP.
tmnxMsdpImportPolicy5 specifies policy number 5 at the protocol
level.
By default no import policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.1.16 |
tmnxMsdpLocalAddressTypeThe value of tmnxMsdpLocalAddressType indicates the type of
tmnxMsdpLocalAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.43.1.17 |
tmnxMsdpLocalAddressThe value of tmnxMsdpLocalAddress is used to configure the local
end of a MSDP session. In order for MSDP to function at least one
peer must be configured. When configuring a peer, the local end
of the MSDP session must be configured. This address is used to
validate incoming connections to the peer and to establish
connections to the remote peer.
By default no local address is configured.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.43.1.18 |
tmnxMsdpStatusPeerCountThe value of tmnxMsdpStatusPeerCount indicates the number
of configured peers.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.43.1.19 |
tmnxMsdpStatusPeersEstablishedThe value of tmnxMsdpStatusPeersEstablished indicates the number
of peers in established statero Gauge32 .1.3.6.1.4.1.6527.3.1.2.43.1.20 |
tmnxMsdpStatusSACountThe value of tmnxMsdpStatusSACount indicates the number of source
active configured in cache.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.43.1.21 |
tmnxMsdpStatusLastTimeUpThe value of tmnxMsdpStatusLastTimeUp indicates the last time the
protocol was enabled.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.43.1.22 |
tmnxMsdpStatusActSrcLimExceededThe value of tmnxMsdpStatusActSrcLimExceeded indicates the number
of times the global active source limit has been exceededro Counter32 .1.3.6.1.4.1.6527.3.1.2.43.1.23 |
tmnxMsdpRpfLookupSequencetmnxMsdpRpfLookupSequence is used to configure the sequence of
route tables that MSDP uses for finding a Reverse Path Forwarding(RPF)
interface for a particular multicast route.
'mucastRouteTable' is the unicast route table to be used only by
multicast protocols(MSDP) which will contain routes submitted by
multi-protocol BGP, ISIS and OSPF.
'ucastRouteTable' is the regular unicast route table which will contain
routes submitted by all the unicast routing protocols. By default,
only the 'ucastRouteTable' is looked up by MSDP for calculating RPF
interface towards the source/rendezvous point. However the operator can
specify the following:
a) Use unicast route table only
b) Use multicast unicast route table only or
c) Use both the route tables.
In case of (c), MSDP will always lookup first in the 'mucastRouteTable'
and if there is a route, it will use it. If MSDP does not find a
route in the first lookup, it will try to find it in the
'ucastRouteTable'.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.43.1.24 |
tmnxMsdpSACacheLifetimeThe value of tmnxMsdpSACacheLifetime specifies lifetime given to
SA cache entries in seconds when created or refreshed.
This object does not measure time per se; instead, it is the
delta from the time at which an SA message is received at
which it should be expired if not refreshed. (i.e., it is
the value of tmnxMsdpSrcActiveExpiryTime immediately after
receiving an SA message applying to that row.)rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.43.1.25 |
tmnxMsdpSARejectExportPolicyThe value of tmnxMsdpSARejectExportPolicy indicates number of
SA messages that were not sent due to export policy.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.43.1.26 |
tmnxMsdpSARejectImportPolicyThe value of tmnxMsdpSARejectImportPolicy indicates number of
SA messages that were rejected due to import policy.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.43.1.27 |
tmnxMsdpPeerTableThe tmnxMsdpPeerTable table provides information on the properties
of a MSDP peer. SEQUENCE OF TmnxMsdpPeerEntry .1.3.6.1.4.1.6527.3.1.2.43.2 |
tmnxMsdpPeerEntrytmnxMsdpPeerEntry represents a row entry in tmnxMsdpPeerTable for a
MSDP peer.
Entries can be created and deleted via SNMP SET operations through
tmnxMsdpPeerRowStatus. TmnxMsdpPeerEntry .1.3.6.1.4.1.6527.3.1.2.43.2.1 |
tmnxMsdpPeerAddressTypeThe value of tmnxMsdpPeerAddressType indicates the type of
tmnxMsdpPeerAddress. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.43.2.1.1 |
tmnxMsdpPeerAddressThe value of tmnxMsdpPeerAddress indicates the address of the MSDP
peer. InetAddress .1.3.6.1.4.1.6527.3.1.2.43.2.1.2 |
tmnxMsdpPeerRowStatustmnxMsdpPeerRowStatus is the object used for creating and deleting
row entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.43.2.1.3 |
tmnxMsdpPeerMaxActiveSourcesThe value of tmnxMsdpPeerMaxActiveSources specifies the maximum
number of source active messages that will be accepted by MSDP.
This effectively controls the number of active sources that
can be stored on the system.
By default, no limit is placed on the number of source active
messages and this is specified by the value '-1'. A value of
0 means that no source active messages will be accepted.rw Integer32 (-1|0..1000000) .1.3.6.1.4.1.6527.3.1.2.43.2.1.4 |
tmnxMsdpPeerMsgRcvRateThe value of tmnxMsdpPeerMsgRcvRate specifies the number of MSDP
messages (including source active messages) that are read from the
TCP session per tmnxMsdpPeerMsgRcvRateTime seconds.
By default, no MSDP messages are read from the TCP session
and this is specified by the value 0.
Once the number of MSDP packets defined in tmnxMsdpPeerMsgRcvRateThd
have been processed the rate of all other MSDP packets is rate
limited by no longer accepting messages from the TCP session until
tmnxMsdpPeerMsgRcvRateTime seconds have elapsed.rw Unsigned32 (0|10..10000) .1.3.6.1.4.1.6527.3.1.2.43.2.1.5 |
tmnxMsdpPeerMsgRcvRateTimeThe value of tmnxMsdpPeerMsgRcvRateTime specifies the time in seconds
that together with tmnxMsdpPeerMsgRcvRate defines the number of
MSDP messages (including source active messages) that are read from
the TCP session within the configured number of seconds.
By default, no MSDP messages are read from the TCP session
and this is specified by the value 0.
Once the number of MSDP packets defined in tmnxMsdpPeerMsgRcvRateThd
have been processed the rate of all other MSDP packets is rate
limited by no longer accepting messages from the TCP session until
tmnxMsdpPeerMsgRcvRateTime seconds have elapsed.rw Unsigned32 (0|1..600) UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.43.2.1.6 |
tmnxMsdpPeerMsgRcvRateThdThe value of tmnxMsdpPeerMsgRcvRateThd specifies the number of
MSDP messages that can be processed before tmnxMsdpPeerMsgRcvRate is
set. This is useful during system startup and initialization.
By default, no MSDP messages are read from the TCP session
and this is specified by the value 0.
Once the number of MSDP packets defined in
tmnxMsdpPeerMsgRcvRateThd have been processed the rate of all
other MSDP packets is rate limited by no longer accepting messages
from the TCP session until tmnxMsdpPeerMsgRcvRateTime seconds have
elapsed.rw Gauge32 (0|1..1000000) .1.3.6.1.4.1.6527.3.1.2.43.2.1.7 |
tmnxMsdpPeerAuthKeyThe value of tmnxMsdpPeerAuthKey specifies the authentication
key to be used for a specific MSDP peering session. Authentication
is done using the MD-5 message based digest protocol. Authentication
cannot be configured globally and can be applied per peer only.
The authentication key can be any combination of letters or numbers.
Note that the string may contain embedded nulls.
By default, all MSDP messages are accepted and the MD5 signature
option authentication key is disabledrw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.43.2.1.8 |
tmnxMsdpPeerAuthKeyEncryptedWhen the value of tmnxMsdpPeerAuthKeyEncrypted is 'true', the
password specified by tmnxMsdpPeerAuthKey is in the encrypted
form.
When the value of tmnxMsdpPeerAuthKeyEncrypted is 'false', the
password specified by tmnxMsdpPeerAuthKey is in plain text.
tmnxMsdpPeerAuthKey and tmnxMsdpPeerAuthKeyEncrypted, which indicates
whether or not the password string is encrypted, must be set
together in the same SNMP request PDU or else the set request
will fail with an inconsistentValue error.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.43.2.1.9 |
tmnxMsdpPeerDefaultPeerThe value of tmnxMsdpPeerDefaultPeer is used to configure a peer as
the default Msdp peer due to which all source-active messages
from the peer will be accepted without the usual
peer-reverse-path-forwarding (RPF) check.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.43.2.1.10 |
tmnxMsdpPeerAdminStateThe value of tmnxMsdpPeerAdminState specifies the desired administrative
state for a MSDP peer. When a MSDP peer is 'outOfService' the
operational state of MSDP as well as the operational state of other
entities under it, like peer group is also disabled.
By default, the state of a MSDP peer is 'inService'.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.2.1.11 |
tmnxMsdpPeerExportPolicy1The value of tmnxMsdpPeerExportPolicy1 specifies the export policy
to export Source Active (SA) state from the SA list into MSDP.
A maximum of five policy names can be specified.
tmnxMsdpPeerExportPolicy1 specifies policy number 1 at the protocol
level.
By default no export policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.2.1.12 |
tmnxMsdpPeerExportPolicy2The value of tmnxMsdpPeerExportPolicy2 specifies the export policy
to export Source Active (SA) state from the SA list into MSDP.
tmnxMsdpPeerExportPolicy2 specifies policy number 2 at the protocol
level.
By default no export policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.2.1.13 |
tmnxMsdpPeerExportPolicy3The value of tmnxMsdpPeerExportPolicy3 specifies the export policy
to export Source Active (SA) state from the SA list into MSDP.
tmnxMsdpPeerExportPolicy3 specifies policy number 3 at the protocol
level.
By default no export policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.2.1.14 |
tmnxMsdpPeerExportPolicy4The value of tmnxMsdpPeerExportPolicy4 specifies the export policy
to export Source Active (SA) state from the SA list into MSDP.
tmnxMsdpPeerExportPolicy4 specifies policy number 4 at the protocol
level.
By default no export policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.2.1.15 |
tmnxMsdpPeerExportPolicy5The value of tmnxMsdpPeerExportPolicy5 specifies the export policy
to export Source Active (SA) state from the SA list into MSDP.
tmnxMsdpPeerExportPolicy1 specifies policy number 5 at the protocol
level.
By default no export policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.2.1.16 |
tmnxMsdpPeerImportPolicy1The value of tmnxMsdpPeerImportPolicy1 specifies the import policy
to import Source Active (SA) state from the SA list into MSDP. A
maximum of five policy names can be specified.
tmnxMsdpPeerImportPolicy1 specifies policy number 1 at the protocol
level.
By default no import policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.2.1.17 |
tmnxMsdpPeerImportPolicy2The value of tmnxMsdpPeerImportPolicy2 specifies the import policy
to import Source Active (SA) state from the SA list into MSDP.
tmnxMsdpPeerImportPolicy2 specifies policy number 2 at the protocol
level.
By default no import policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.2.1.18 |
tmnxMsdpPeerImportPolicy3The value of tmnxMsdpPeerImportPolicy3 specifies the import policy
to import Source Active (SA) state from the SA list into MSDP.
tmnxMsdpPeerImportPolicy3 specifies policy number 3 at the protocol
level.
By default no import policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.2.1.19 |
tmnxMsdpPeerImportPolicy4The value of tmnxMsdpPeerImportPolicy4 specifies the import policy
to import Source Active (SA) state from the SA list into MSDP.
tmnxMsdpPeerImportPolicy4 specifies policy number 4 at the protocol
level.
By default no import policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.2.1.20 |
tmnxMsdpPeerImportPolicy5The value of tmnxMsdpPeerImportPolicy5 specifies the import policy
to import Source Active (SA) state from the SA list into MSDP.
tmnxMsdpPeerImportPolicy5 specifies policy number 5 at the protocol
level.
By default no import policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.2.1.21 |
tmnxMsdpPeerLocalAddressTypeThe value of tmnxMsdpPeerLocalAddressType is used to configure the
type of tmnxMsdpPeerLocalAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.43.2.1.22 |
tmnxMsdpPeerLocalAddressThe value of tmnxMsdpPeerLocalAddress is used to configure the
local end of a MSDP session. In order for MSDP to function at least
one peer must be configured. When configuring a peer, the local
end of the MSDP session must be configured. This address is used
to validate incoming connections to the peer and to establish
connections to the remote peer.
By default no local address is configured.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.43.2.1.23 |
tmnxMsdpPeerStateThe value of tmnxMsdpPeerState indicates the status of the
connection.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.43.2.1.24 |
tmnxMsdpPeerLastUpOrDownThe value of tmnxMsdpPeerLastUpOrDown indicates the time at
which the most recent peer-state change occurred.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.43.2.1.25 |
tmnxMsdpPeerConRetryThe value of tmnxMsdpPeerConRetry indicates number
of peer connection retry attempts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.43.2.1.26 |
tmnxMsdpPeerStateTimerThe value of tmnxMsdpPeerStateTimer indicates the
number of seconds to wait before another message is sent to
a peer.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.43.2.1.27 |
tmnxMsdpPeerTimeoutThe value of tmnxMsdpPeerTimeout indicates the number
of seconds to wait for a response from the peer before declaring
the peer unavailable.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.43.2.1.28 |
tmnxMsdpPeerSAAcceptedThe value of tmnxMsdpPeerSAAccepted indicates the number of
entries in the source-active cache accepted from the peer.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.43.2.1.29 |
tmnxMsdpPeerSARecvdThe value of tmnxMsdpPeerSARecvd indicates the number of
entries in the source-active cache received by the peer.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.43.2.1.30 |
tmnxMsdpPeerLastASLimitThe value of tmnxMsdpPeerLastASLimit indicates the time
that the last active source limit was triggered.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.43.2.1.31 |
tmnxMsdpPeerGroupTableThe tmnxMsdpPeerGroupTable provides a listing of all MSDP Peer
Groups. SEQUENCE OF TmnxMsdpPeerGroupEntry .1.3.6.1.4.1.6527.3.1.2.43.3 |
tmnxMsdpPeerGroupEntrytmnxMsdpPeerGroupEntry represents a MSDP Peer Group. Entries can be
created and deleted via SNMP SET operations. TmnxMsdpPeerGroupEntry .1.3.6.1.4.1.6527.3.1.2.43.3.1 |
tmnxMsdpPeerGroupNameThe value of tmnxMsdpPeerGroupName indicates the peer group name. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.3.1.1 |
tmnxMsdpPeerGroupRowStatustmnxMsdpPeerGroupRowStatus is the object used for creating and deleting
row entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.43.3.1.2 |
tmnxMsdpPeerGroupMsgRcvRateThe value of tmnxMsdpPeerGroupMsgRcvRate specifies the number of
MSDP messages (including source active messages) that are read from
the TCP session per tmnxMsdpMsgRcvRateTime seconds
By default, no MSDP messages are read from the TCP session
and this is specified by the value 0.
Once the number of MSDP packets defined in tmnxMsdpMsgRcvRateThd
have been processed the rate of all other MSDP packets is rate
limited by no longer accepting messages from the TCP session until
tmnxMsdpMsgRcvRateTime seconds have elapsed.rw Unsigned32 (0|10..10000) .1.3.6.1.4.1.6527.3.1.2.43.3.1.3 |
tmnxMsdpPeerGroupMsgRcvRateTimeThe value of tmnxMsdpPeerGroupMsgRcvRateTime specifies the maximum
number of source active messages that will be accepted by MSDP.
This effectively controls the number of source active messages that can be
stored on the system. By default, no MSDP messages are read from the
TCP session and this is specified by the value 0.
Once the number of MSDP packets defined in
tmnxMsdpPeerGroupMsgRcvRateThd have been processed the rate of all
other MSDP packets is rate limited by no longer accepting messages
from the TCP session until tmnxMsdpPeerGroupMsgRcvRateTime seconds have
elapsed.rw Unsigned32 (0|1..600) UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.43.3.1.4 |
tmnxMsdpPeerGroupMsgRcvRateThdThe value of tmnxMsdpPeerGroupMsgRcvRateThd specifies the
number of MSDP messages that can be processed before
tmnxMsdpPeerGroupMsgRcvRate is set. This is useful during system
startup and initialization.
By default, no MSDP messages are read from the TCP session and this
is specified by the value 0.
Once the number of MSDP packets defined in tmnxMsdpPeerGroupMsgRcvRateThd
have been processed the rate of all other MSDP packets is rate
limited by no longer accepting messages from the TCP session until
tmnxMsdpPeerGroupMsgRcvRateTime seconds have elapsed.rw Gauge32 (0|1..1000000) .1.3.6.1.4.1.6527.3.1.2.43.3.1.5 |
tmnxMsdpPeerGroupAdminStateThe value of tmnxMsdpPeerGroupAdminState specifies the desired
administrative state for a MSDP peer group. When
tmnxMsdpPeerGroupAdminState is 'outOfService' the
operational state of the MSDP peer group as well as the operational
state of other entities under it, like other peers is also disabled.
By default, the state of a MSDP peer group is 'inService'.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.3.1.6 |
tmnxMsdpPeerGroupExportPolicy1The value of tmnxMsdpPeerGroupExportPolicy1 specifies the export
policy number 1 at peer group level.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.3.1.7 |
tmnxMsdpPeerGroupExportPolicy2The value of tmnxMsdpPeerGroupExportPolicy2 specifies the export
policy number 2 at peer group protocol level.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.3.1.8 |
tmnxMsdpPeerGroupExportPolicy3The value of tmnxMsdpPeerGroupExportPolicy3 specifies the export
policy number 3 at peer group protocol level.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.3.1.9 |
tmnxMsdpPeerGroupExportPolicy4The value of tmnxMsdpPeerGroupExportPolicy4 specifies the export
policy number 4 at peer group protocol level.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.3.1.10 |
tmnxMsdpPeerGroupExportPolicy5The value of tmnxMsdpPeerGroupExportPolicy5 specifies the export
policy number 5 at peer group protocol level.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.3.1.11 |
tmnxMsdpPeerGroupImportPolicy1The value of tmnxMsdpPeerGroupImportPolicy1 specifies the import
policy number 1 at peer group level.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.3.1.12 |
tmnxMsdpPeerGroupImportPolicy2The value of tmnxMsdpPeerGroupImportPolicy2 specifies the import
policy number 2 at peer group level.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.3.1.13 |
tmnxMsdpPeerGroupImportPolicy3The value of tmnxMsdpPeerGroupImportPolicy3 specifies the import
policy number 3 at peer group level.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.3.1.14 |
tmnxMsdpPeerGroupImportPolicy4The value of tmnxMsdpPeerGroupImportPolicy4 specifies the import
policy number 4 at peer group level.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.3.1.15 |
tmnxMsdpPeerGroupImportPolicy5The value of tmnxMsdpPeerGroupImportPolicy5 specifies the import
policy number 5 at peer group level.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.3.1.16 |
tmnxMsdpPeerGroupLocalAddrTypeThe value of tmnxMsdpPeerGroupLocalAddrType is used to configure the
type of tmnxMsdpPeerGroupLocalAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.43.3.1.17 |
tmnxMsdpPeerGroupLocalAddressThe value of tmnxMsdpPeerGroupLocalAddress is used to configure the
local end of a MSDP session. In order for MSDP to function at least
one peer must be configured. When configuring a peer, the local
end of the MSDP session must be configured. This address is used
to validate incoming connections to the peer and to establish
connections to the remote peer.
By default no local address is configured.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.43.3.1.18 |
tmnxMsdpPeerGroupModeThe value of tmnxMsdpPeerGroupMode is used to configure groups of
peers in a full mesh topology.
MSDP peers can be grouped in a full-mesh topology that prevents
excessive flooding of source-active messages to neighboring peers.
When operating in meshed mode, source-active messages received from
a mesh group member are always accepted but are not flooded to other
members of the same mesh group. As a result, these source-active
messages are only flooded to non-mesh group peers or members of
other mesh groups.
By default 'standard' (non-meshed) mode is used.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.43.3.1.19 |
tmnxMsdpPeerGroupMaxActSourcesThe value of tmnxMsdpPeerGroupMaxActSources specifies the
maximum number of source active messages that will be accepted by
this MSDP peer group. This effectively controls the number of
active sources that can be stored on the system.
By default, no limit is placed on the number of source active
messages and this is specified by the value '-1'. A value of
0 means that no source active messages will be accepted.rw Integer32 (-1|0..1000000) .1.3.6.1.4.1.6527.3.1.2.43.3.1.20 |
tmnxMsdpPeerGroupActMsgsExMaxThe value of tmnxMsdpPeerGroupActMsgsExMax indicates the number of
source active messages received from this group that exceeded the
established maximum number.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.43.3.1.21 |
tmnxMsdpPeerGrpSARejExpPolicyThe value of tmnxMsdpPeerGrpSARejExpPolicy indicates the number of
source active messages received from this group that were were not
sent due to export policy.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.43.3.1.22 |
tmnxMsdpPeerGrpSARejImpPolicyThe value of tmnxMsdpPeerGrpSARejImpPolicy indicates the number of
source active messages received from this group that were rejected
due to import policy.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.43.3.1.23 |
tmnxMsdpPeerGrpPeerTableThe tmnxMsdpPeerGrpPeerTable table provides a listing of all
peers under MSDP Peer Groups. SEQUENCE OF TmnxMsdpPeerGrpPeerEntry .1.3.6.1.4.1.6527.3.1.2.43.4 |
tmnxMsdpPeerGrpPeerEntryAn entry representing a peer in an MSDP Peer Group.
Entries can be created and deleted via SNMP SET operations. TmnxMsdpPeerGrpPeerEntry .1.3.6.1.4.1.6527.3.1.2.43.4.1 |
tmnxMsdpPeerGrpPeerAddressTypeThe value of tmnxMsdpPeerGrpPeerAddressType indicates the type of
address of the MSDP peer. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.43.4.1.1 |
tmnxMsdpPeerGrpPeerAddressThe value of tmnxMsdpPeerGrpPeerAddress indicates the address of
the MSDP peer. InetAddress .1.3.6.1.4.1.6527.3.1.2.43.4.1.2 |
tmnxMsdpPeerGrpPeerRowStatustmnxMsdpPeerGrpPeerRowStatus is the object used for creating and deleting
row entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.43.4.1.3 |
tmnxMsdpPeerGrpPeerMaxActSrcsThe value of tmnxMsdpPeerGrpPeerMaxActSrcs specifies the
maximum number of source active messages that will be accepted by
MSDP peer group peer. This effectively controls the number of active
sources that can be stored on the system.
By default, no limit is placed on the number of source active messages
and this is specified by the value '-1'. A value of
0 means that no source active messages will be accepted.rw Integer32 (-1|0..1000000) .1.3.6.1.4.1.6527.3.1.2.43.4.1.4 |
tmnxMsdpPeerGrpPeerMsgRcvRtThe value of tmnxMsdpPeerGrpPeerMsgRcvRt specifies the number
of MSDP messages (including source active messages) that are read
from the TCP session per tmnxMsdpPeerGrpPeerMsgRcvRtTime seconds.
By default, no MSDP messages are read from the TCP session
and this is specified by the value 0.
Once the number of MSDP packets defined in
tmnxMsdpPeerGrpPeerMsgRcvRtThd have been processed the rate of all
other MSDP packets is rate limited by no longer accepting messages
from the TCP session until tmnxMsdpPeerGrpPeerMsgRcvRtTime seconds have
elapsed.rw Unsigned32 (0|10..10000) .1.3.6.1.4.1.6527.3.1.2.43.4.1.5 |
tmnxMsdpPeerGrpPeerMsgRcvRtTimeThe value of tmnxMsdpPeerGrpPeerMsgRcvRtTime specifies the time
in seconds that together with tmnxMsdpPeerGrpPeerMsgRcvRt
defines the number of MSDP messages (including source active
messages) that are read from the TCP session within the configured
number of seconds.
By default, no MSDP messages are read from the TCP session
and this is specified by the value 0.
Once the number of MSDP packets defined in tmnxMsdpPeerGrpPeerMsgRcvRtThd
have been processed the rate of all other MSDP packets is rate
limited by no longer accepting messages from the TCP session until
tmnxMsdpPeerGrpPeerMsgRcvRtTime seconds have elapsed.rw Unsigned32 (0|1..600) UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.43.4.1.6 |
tmnxMsdpPeerGrpPeerMsgRcvRtThdThe value of tmnxMsdpPeerGrpPeerMsgRcvRtThd specifies the number of
MSDP messages that can be processed before tmnxMsdpPeerGrpPeerMsgRcvRt
is set.
This is useful during system startup and initialization.
By default, no MSDP messages are read from the TCP session
and this is specified by the value 0.
Once the number of MSDP packets defined in tmnxMsdpPeerGrpPeerMsgRcvRtThd
have been processed the rate of all other MSDP packets is rate
limited by no longer accepting messages from the TCP session until
tmnxMsdpPeerGrpPeerMsgRcvRtTime seconds have elapsed.rw Gauge32 (0|1..1000000) .1.3.6.1.4.1.6527.3.1.2.43.4.1.7 |
tmnxMsdpPeerGrpPeerAuthKeyThe value of tmnxMsdpPeerGrpPeerAuthKey specifies the
authentication key to be used for a specific MSDP peer group peering
session. Authentication is done using the MD-5 message based digest
protocol. Authentication cannot be configured globally and can be
applied per peer only. The authentication key can be any
combination of letters or numbers. Note that the string may
contain embedded nulls.
By default all MSDP messages are accepted and the MD5 signature
option authentication key is disabledrw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.43.4.1.8 |
tmnxMsdpPeerGrpPeerAKeyEncryptWhen the value of tmnxMsdpPeerGrpPeerAKeyEncrypt is 'true', the
password specified by tmnxMsdpPeerGrpPeerAuthKey is in the encrypted
form.
When the value of tmnxMsdpPeerGrpPeerAKeyEncrypt is 'false', the
password specified by tmnxMsdpPeerGrpPeerAuthKey is in plain text.
tmnxMsdpPeerGrpPeerAuthKey and tmnxMsdpPeerGrpPeerAKeyEncrypt,
which indicates whether or not the password string is encrypted,
must be set together in the same SNMP request PDU or else the set
request will fail with an inconsistentValue error.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.43.4.1.9 |
tmnxMsdpPeerGrpPeerDefaultPeerThe value of tmnxMsdpPeerGrpPeerDefaultPeer is used to configure
a peer as the default MSDP peer due to which all source-active
messages from the peer will be accepted without the usual
peer-reverse-path-forwarding (RPF) check.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.43.4.1.10 |
tmnxMsdpPeerGrpPeerAdminStateThe value of tmnxMsdpPeerGrpPeerAdminState specifies the desired
administrative state for a peer under a MSDP peer group. When
tmnxMsdpPeerGrpPeerAdminState is 'outOfService' the
operational state of the MSDP peer is disabled.
By default, tmnxMsdpPeerGrpPeerAdminState is 'inService'.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.4.1.11 |
tmnxMsdpPeerGrpPeerExportPolicy1The value of tmnxMsdpPeerGrpPeerExportPolicy1 specifies the export
policy to export Source Active (SA) state from the SA list into MSDP.
A maximum of five policy names can be specified.
tmnxMsdpPeerGrpPeerExportPolicy1 specifies policy number 1 at the
protocol level.
By default no export policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.4.1.12 |
tmnxMsdpPeerGrpPeerExportPolicy2The value of tmnxMsdpPeerGrpPeerExportPolicy2 specifies the export
policy to export Source Active (SA) state from the SA list into MSDP.
tmnxMsdpPeerGrpPeerExportPolicy2 specifies policy number 2 at the
protocol level.
By default no export policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.4.1.13 |
tmnxMsdpPeerGrpPeerExportPolicy3The value of tmnxMsdpPeerGrpPeerExportPolicy3 specifies the export
policy to export Source Active (SA) state from the SA list into MSDP.
tmnxMsdpPeerGrpPeerExportPolicy3 specifies policy number 3 at the
protocol level.
By default no export policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.4.1.14 |
tmnxMsdpPeerGrpPeerExportPolicy4The value of tmnxMsdpPeerGrpPeerExportPolicy4 specifies the export
policy to export Source Active (SA) state from the SA list into MSDP.
tmnxMsdpPeerGrpPeerExportPolicy4 specifies policy number 4 at the
protocol level.
By default no export policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.4.1.15 |
tmnxMsdpPeerGrpPeerExportPolicy5The value of tmnxMsdpPeerGrpPeerExportPolicy5 specifies the export
policy to export Source Active (SA) state from the SA list into MSDP.
tmnxMsdpPeerGrpPeerExportPolicy1 specifies policy number 5 at the
protocol level.
By default no export policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.4.1.16 |
tmnxMsdpPeerGrpPeerImportPolicy1The value of tmnxMsdpPeerGrpPeerImportPolicy1 specifies the import
policy to import Source Active (SA) state from the SA list into MSDP.
A maximum of five policy names can be specified.
tmnxMsdpPeerGrpPeerImportPolicy1 specifies policy number 1 at the
protocol level.
By default no import policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.4.1.17 |
tmnxMsdpPeerGrpPeerImportPolicy2The value of tmnxMsdpPeerGrpPeerImportPolicy2 specifies the import
policy to import Source Active (SA) state from the SA list into MSDP.
tmnxMsdpPeerGrpPeerImportPolicy2 specifies policy number 2 at the
protocol level.
By default no import policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.4.1.18 |
tmnxMsdpPeerGrpPeerImportPolicy3The value of tmnxMsdpPeerGrpPeerImportPolicy3 specifies the import
policy to import Source Active (SA) state from the SA list into MSDP.
tmnxMsdpPeerGrpPeerImportPolicy3 specifies policy number 3 at the
protocol level.
By default no import policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.4.1.19 |
tmnxMsdpPeerGrpPeerImportPolicy4The value of tmnxMsdpPeerGrpPeerImportPolicy4 specifies the import
policy to import Source Active (SA) state from the SA list into MSDP.
tmnxMsdpPeerGrpPeerImportPolicy4 specifies policy number 4 at the
protocol level.
By default no import policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.4.1.20 |
tmnxMsdpPeerGrpPeerImportPolicy5The value of tmnxMsdpPeerGrpPeerImportPolicy5 specifies the import
policy to import Source Active (SA) state from the SA list into MSDP.
tmnxMsdpPeerGrpPeerImportPolicy5 specifies policy number 5 at the
protocol level.
By default no import policies are applied and all SA entries are
announced.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.4.1.21 |
tmnxMsdpPeerGrpPeerLocAddrTypeThe value of tmnxMsdpPeerGrpPeerLocAddrType indicates the type of
tmnxMsdpPeerGrpPeerLocalAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.43.4.1.22 |
tmnxMsdpPeerGrpPeerLocalAddressThe value of tmnxMsdpPeerGrpPeerLocalAddress is used to configure
the local end of a MSDP session. In order for MSDP to function at
least one peer must be configured. When configuring a peer, the
local end of the MSDP session must be configured. This address is
used to validate incoming connections to the peer and to establish
connections to the remote peer.
By default no local address is configured.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.43.4.1.23 |
tmnxMsdpPeerGrpPeerStateThe value of tmnxMsdpPeerGrpPeerState indicates the status of the
connection.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.43.4.1.24 |
tmnxMsdpPeerGrpPeerLastUpOrDownThe value of tmnxMsdpPeerGrpPeerLastUpOrDown indicates the time at
which the most recent peer-state change occurred.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.43.4.1.25 |
tmnxMsdpPeerGrpPeerConRetryThe value of tmnxMsdpPeerGrpPeerConRetry indicates number
of peer connection retry attempts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.43.4.1.26 |
tmnxMsdpPeerGrpPeerStateTimerThe value of tmnxMsdpPeerGrpPeerStateTimer indicates the
number of seconds to wait before another message is sent to
a peer.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.43.4.1.27 |
tmnxMsdpPeerGrpPeerTimeoutThe value of tmnxMsdpPeerGrpPeerTimeout indicates the number
of seconds to wait for a response from the peer before declaring
the peer unavailable.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.43.4.1.28 |
tmnxMsdpPeerGrpPeerSAAcceptedThe value of tmnxMsdpPeerGrpPeerSAAccepted indicates the number of
entries in the source-active cache accepted from the peer.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.43.4.1.29 |
tmnxMsdpPeerGrpPeerSARecvdThe value of tmnxMsdpPeerGrpPeerSARecvd indicates the number of
entries in the source-active cache received by the peer.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.43.4.1.30 |
tmnxMsdpPeerGrpPeerLastASLimitThe value of tmnxMsdpPeerGrpPeerLastASLimit indicates the time
that the last active source limit was triggered.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.43.4.1.31 |
tmnxMsdpSourceTableThe tmnxMsdpSourceTable provides a listing of all MSDP Source
configuration. SEQUENCE OF TmnxMsdpSourceEntry .1.3.6.1.4.1.6527.3.1.2.43.5 |
tmnxMsdpSourceEntryAn tmnxMsdpSourceEntry represents a MSDP Source configuration.
Entries can be created and deleted via SNMP SET operations. TmnxMsdpSourceEntry .1.3.6.1.4.1.6527.3.1.2.43.5.1 |
tmnxMsdpSourcePrefixTypeThe value of tmnxMsdpSourcePrefixType indicates the type of
tmnxMsdpSourcePrefix. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.43.5.1.1 |
tmnxMsdpSourcePrefixThe value of tmnxMsdpSourcePrefix indicates the IP address of the
sources from which the source active messages would be accepted. InetAddress .1.3.6.1.4.1.6527.3.1.2.43.5.1.2 |
tmnxMsdpSourceMaskThe value of tmnxMsdpSourceMask indicates the mask to be used along
with tmnxMsdpSourcePrefix to obtain the range of addresses from
which the router can accept source active messages. InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.43.5.1.3 |
tmnxMsdpSourceRowStatustmnxMsdpSourceRowStatus is the object used for creating and deleting
row entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.43.5.1.4 |
tmnxMsdpSourceMaxActiveSourcesThe value of tmnxMsdpSourceMaxActiveSources specifies the maximum
number of source active messages that will be accepted by MSDP.
This effectively controls the number of active sources that can be
stored on the system.
By default, no limit is placed on the number of source active messages
and this is specified by the value '-1'. A value of
0 means that no source active messages will be accepted.rw Integer32 (-1|0..1000000) .1.3.6.1.4.1.6527.3.1.2.43.5.1.5 |
tmnxMsdpSourceDiscMethodThe value of tmnxMsdpSourceDiscMethod indicates the discovery
method for this multicast source. If the source entry was created
by an user, the value of this field is 'configured'. If the source
was created dynamically, the value is 'dynamic'ro Enumeration .1.3.6.1.4.1.6527.3.1.2.43.5.1.6 |
tmnxMsdpSourceSrcActMsgsExMaxThe value of tmnxMsdpSourceSrcActMsgsExMax indicates the number of
source active messages received from this source that exceeded the
established maximum number.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.43.5.1.7 |
tmnxMsdpSourceLastExEventTimeThe value of tmnxMsdpSourceLastExEventTime indicates the time the
last exceed event was triggered.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.43.5.1.8 |
tmnxMsdpSrcActiveTableThe tmnxMsdpSrcActiveTable table stores the MSDP Source Active(SA)
advertisements currently in the MSDP speaker's cache. SEQUENCE OF TmnxMsdpSrcActiveEntry .1.3.6.1.4.1.6527.3.1.2.43.6 |
tmnxMsdpSrcActiveEntryAn entry representing an MSDP SA advertisement. The INDEX to
this table includes msdpSACacheOriginRP for diagnosing
incorrect MSDP advertisements; normally a Source and Group
pair would be unique.
This is a read-only table. TmnxMsdpSrcActiveEntry .1.3.6.1.4.1.6527.3.1.2.43.6.1 |
tmnxMsdpSrcActiveGroupAddrTypeThe value of tmnxMsdpSrcActiveGroupAddrType indicates the
address type of tmnxMsdpSrcActiveGroupAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.43.6.1.1 |
tmnxMsdpSrcActiveGroupAddrThe value of tmnxMsdpSrcActiveGroupAddr indicates the group address
of the Source Active entry. InetAddress .1.3.6.1.4.1.6527.3.1.2.43.6.1.2 |
tmnxMsdpSrcActiveSourceAddrTypeThe value of tmnxMsdpSrcActiveSourceAddrType indicates the
address type of tmnxMsdpSrcActiveSourceAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.43.6.1.3 |
tmnxMsdpSrcActiveSourceAddrThe value of tmnxMsdpSrcActiveSourceAddr indicates the source
address of the Source Active entry. InetAddress .1.3.6.1.4.1.6527.3.1.2.43.6.1.4 |
tmnxMsdpSrcActiveOriginRPTypeThe value of tmnxMsdpSrcActiveOriginRPType indicates the
address type of tmnxMsdpSrcActiveOriginRP. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.43.6.1.5 |
tmnxMsdpSrcActiveOriginRPThe value of tmnxMsdpSrcActiveOriginRP indicates the origin RP
address of the Source Active entry. InetAddress .1.3.6.1.4.1.6527.3.1.2.43.6.1.6 |
tmnxMsdpSrcActivePrLearnFrTypeThe value of tmnxMsdpSrcActivePrLearnFrType indicates the
address type of tmnxMsdpSrcActivePeerLearntFrom.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.43.6.1.7 |
tmnxMsdpSrcActivePeerLearntFromThe value of tmnxMsdpSrcActivePeerLearntFrom indicates the peer
from which this Source Active entry was last accepted.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.43.6.1.8 |
tmnxMsdpSrcActiveRPFPeerTypeThe value of tmnxMsdpSrcActiveRPFPeerType indicates the
address type of tmnxMsdpSrcActiveRPFPeer.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.43.6.1.9 |
tmnxMsdpSrcActiveRPFPeerThe value of tmnxMsdpSrcActiveRPFPeer indicates the peer from which
an SA message corresponding to this cache entry would be accepted
(i.e. the RPF peer for tmnxMsdpSrcActiveOriginRP). This may be
different than tmnxMsdpSrcActivePeerLearntFrom if this entry was
created by an MSDP SA-Response.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.43.6.1.10 |
tmnxMsdpSrcActiveUpTimeThe value of tmnxMsdpSrcActiveUpTime indicates the time since
this entry was first placed in the Source Active (SA) cache.
It is the difference between the time that the entry was first
placed in the SA cache and the current time.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.43.6.1.11 |
tmnxMsdpSrcActiveExpiryTimeThe value of tmnxMsdpSrcActiveExpiryTime indicates the time
remaining before this entry will expire from the Source Active
(SA) cache.
It is difference between the current time and the time that the
entry will expire.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.43.6.1.12 |
tmnxMsdpPeerStatsTableThe table tmnxMsdpPeerStatsTable is the statistics information
related to a MSDP peer. SEQUENCE OF TmnxMsdpPeerStatsEntry .1.3.6.1.4.1.6527.3.1.2.43.7 |
tmnxMsdpPeerStatsEntrytmnxMsdpPeerStatsEntry is an entry (conceptual row) in the
tmnxMsdpPeerStatsTable. Each entry represents a MSDP peer related
statistics information. TmnxMsdpPeerStatsEntry .1.3.6.1.4.1.6527.3.1.2.43.7.1 |
tmnxMsdpPeerStatsActSrcLimExcdThe value of tmnxMsdpPeerStatsActSrcLimExcd indicates the number
of times the global active source limit has been exceeded by this
peer instance.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.43.7.1.1 |
tmnxMsdpPeerStatsLastStChangeThe value of tmnxMsdpPeerStatsLastStChange indicates how long
ago the peer state changed.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.43.7.1.2 |
tmnxMsdpPeerStatsLastMsgPeerThe value of tmnxMsdpPeerStatsLastMsgPeer indicates how long
ago the last message was received from this peer instance.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.43.7.1.3 |
tmnxMsdpPeerStatsRPFFailuresThe value of tmnxMsdpPeerStatsRPFFailures indicates number of
reverse path forwarding (RPF) failures.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.43.7.1.4 |
tmnxMsdpPeerStatsRemoteClosesThe value of tmnxMsdpPeerStatsRemoteCloses indicates the number
of times the remote peer closed.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.43.7.1.5 |
tmnxMsdpPeerStatsPeerTimeoutsThe value of tmnxMsdpPeerStatsPeerTimeouts indicates the number
of peer timeouts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.43.7.1.6 |
tmnxMsdpPeerStatsSAMsgsSentThe value of tmnxMsdpPeerStatsSAMsgsSent indicates the number of
source-active messages sent.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.43.7.1.7 |
tmnxMsdpPeerStatsSAMsgsRecvdThe value of tmnxMsdpPeerStatsSAMsgsRecvd indicates the number of
source-active messages received.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.43.7.1.8 |
tmnxMsdpPeerStatsSAReqMsgsSentThe value of tmnxMsdpPeerStatsSAReqMsgsSent indicates the number
of source-active request messages sent.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.43.7.1.9 |
tmnxMsdpPeerStatsSAReqMsgsRecvdThe value of tmnxMsdpPeerStatsSAReqMsgsRecvd indicates the number
of source-active request messages received.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.43.7.1.10 |
tmnxMsdpPeerStatsSAResMsgsSentThe value of tmnxMsdpPeerStatsSAResMsgsSent indicates the number
of source-active response messages sent.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.43.7.1.11 |
tmnxMsdpPeerStatsSAResMsgsRecvdThe value of tmnxMsdpPeerStatsSAResMsgsRecvd indicates the number
of source-active response messages received.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.43.7.1.12 |
tmnxMsdpPeerStatsKAMsgsSentThe value of tmnxMsdpPeerStatsKAMsgsSent indicates the number
of keep-alive messages sent.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.43.7.1.13 |
tmnxMsdpPeerStatsKAMsgsRecvdThe value of tmnxMsdpPeerStatsKAMsgsRecvd indicates the number
of keep-alive messages received.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.43.7.1.14 |
tmnxMsdpPeerStatsUnknMsgsRecvdThe value of tmnxMsdpPeerStatsUnknMsgsRecvd indicates the
number of unknown messages received.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.43.7.1.15 |
tmnxMsdpPeerStatsErrorMsgsRecvdThe value of tmnxMsdpPeerStatsErrorMsgsRecvd indicates number of
error messages received.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.43.7.1.16 |
tmnxMsdpPeerStatsSALearntThe value of tmnxMsdpPeerStatsSALearnt indicates the number
of unique source active entries in the cache learned from the peer.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.43.7.1.17 |
tmnxMsdpPeerStatsSARejExpPolicyThe value of tmnxMsdpPeerStatsSARejExpPolicy indicates the number of
source active messages from the peer that were not sent due to
export policy.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.43.7.1.18 |
tmnxMsdpPeerStatsSARejImpPolicyThe value of tmnxMsdpPeerStatsSARejImpPolicy indicates the number of
source active messages from the peer that were rejected due to
import policy.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.43.7.1.19 |
tmnxMsdpPeerStatsResvMsgsRecvdThe value of tmnxMsdpPeerStatsResvMsgsRecvd indicates the
number of MSDP messages received with type 'Reserved'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.43.7.1.20 |
tmnxMsdpSrcActRejTableThe tmnxMsdpSrcActRejTable table stores the MSDP Source Active(SA)
advertisements rejected from the MSDP speaker's cache. SEQUENCE OF TmnxMsdpSrcActRejEntry .1.3.6.1.4.1.6527.3.1.2.43.8 |
tmnxMsdpSrcActRejEntryAn entry representing an MSDP SA advertisement that is rejected.
This is a read-only table. TmnxMsdpSrcActRejEntry .1.3.6.1.4.1.6527.3.1.2.43.8.1 |
tmnxMsdpSrcActRejPeerGroupNameThe value of tmnxMsdpSrcActRejPeerGroupName indicates
the peer group name of the Source Active entry that is rejected. TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.43.8.1.1 |
tmnxMsdpSrcActRejGroupAddrTypeThe value of tmnxMsdpSrcActRejGroupAddrType indicates the
address type of tmnxMsdpSrcActRejGroupAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.43.8.1.2 |
tmnxMsdpSrcActRejGroupAddrThe value of tmnxMsdpSrcActRejGroupAddr indicates the group address
of the Source Active entry that is rejected. InetAddress .1.3.6.1.4.1.6527.3.1.2.43.8.1.3 |
tmnxMsdpSrcActRejSourceAddrTypeThe value of tmnxMsdpSrcActRejSourceAddrType indicates the
address type of tmnxMsdpSrcActRejSourceAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.43.8.1.4 |
tmnxMsdpSrcActRejSourceAddrThe value of tmnxMsdpSrcActRejSourceAddr indicates the source
address of the Source Active entry that is rejected. InetAddress .1.3.6.1.4.1.6527.3.1.2.43.8.1.5 |
tmnxMsdpSrcActRejOriginRPTypeThe value of tmnxMsdpSrcActRejOriginRPType indicates
the address type of tmnxMsdpSrcActRejOriginRP. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.43.8.1.6 |
tmnxMsdpSrcActRejOriginRPThe value of tmnxMsdpSrcActRejOriginRP indicates the origin
rendezvous point (RP) address of the Source Active entry that is
rejected. InetAddress .1.3.6.1.4.1.6527.3.1.2.43.8.1.7 |
tmnxMsdpSrcActRejPeerAddrTypeThe value of tmnxMsdpSrcActRejPeerAddrType indicates
the address type of tmnxMsdpSrcActRejPeerAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.43.8.1.8 |
tmnxMsdpSrcActRejPeerAddrThe value of tmnxMsdpSrcActRejPeerAddr indicates the peer
from which this rejected Source Active entry was last received. InetAddress .1.3.6.1.4.1.6527.3.1.2.43.8.1.9 |
tmnxMsdpSrcActRejFailureReasonThe value of tmnxMsdpSrcActRejFailureReason indicates
the reason why this Source Active entry is rejected.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.43.8.1.10 |
tmnxMsdpNotifyPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.43 |
tmnxMsdpNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.43.0 |
tmnxMsdpActSrcLimExcdThe tmnxMsdpActSrcLimExcd event is generated whenever the global
active source limit has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.43.0.1 |
tmnxMsdpPeerActSrcLimExcdThe tmnxMsdpPeerActSrcLimExcd event is generated whenever the
active source limit has been exceeded for the peer. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.43.0.2 |
tmnxMsdpRPFFailureThe tmnxMsdpRPFFailure event is generated whenever a RPF(Reverse
Path Forwarding) failure occurs for a source configured by user. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.43.0.3 |
tmnxMsdpSourceSrcActMsgsExcdThe tmnxMsdpSourceSrcActMsgsExcd event is generated when the
source active messages received from this source has exceeded
the established maximum number. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.43.0.4 |
tmnxMsdpGroupSrcActMsgsExcdThe tmnxMsdpGroupSrcActMsgsExcd event is generated when the
source active messages received from this group has exceeded
the established maximum number. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.43.0.5 |