TIMETRA-IEEE8021-CFM-MIB
AI MIB Summary
The TIMETRA-IEEE8021-CFM-MIB enables SNMP-based provisioning and monitoring of IEEE 802.1ag Connectivity Fault Management (CFM) operations, including Maintenance Association (MA) states, Maintenance Domain (MD) hierarchies, and Continuity Check (CCM) messages on Alcatel-Lucent SROS platforms. This module extends standard IEEE 802.1ag metrics to track fault detection, loopback, and link trace functions specific to the vendor's service provider Ethernet infrastructure.
This document is the SNMP MIB module to manage and provision dot1ag Connectivity Fault Management module functionality for the Alcatel-Lucent SROS products. This includes extensions to the IEEE8021-CFM MIB.
Copyright 2008-2013 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions.
Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies.
This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Main OID:
timetraIEEE8021CfmMIBModule.1.3.6.1.4.1.6527.1.1.3.52
213
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
213 total| Object Name |
|---|
timetraIEEE8021CfmMIBModuleThis document is the SNMP MIB module to manage and provision dot1ag
Connectivity Fault Management module functionality for the
Alcatel-Lucent SROS products. This includes extensions to the
IEEE8021-CFM MIB.
Copyright 2008-2013 Alcatel-Lucent. All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel-Lucent's
proprietary intellectual property. Alcatel-Lucent retains
all title and ownership in the Specification, including any
revisions.
Alcatel-Lucent grants all interested parties a non-exclusive
license to use and distribute an unmodified copy of this
Specification in connection with management of Alcatel-Lucent
products, and without fee, provided this copyright notice and
license appear on all copies.
This Specification is supplied 'as is', and Alcatel-Lucent
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.6527.1.1.3.52 |
tmnxDot1agMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.52 |
tmnxDot1agCfmCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.52.1 |
tmnxDot1agCfmGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.52.2 |
tmnxDot1agCfmV6v0Groups OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.52.2.10 |
tmnxDot1agCfmV7v0Groups OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.52.2.11 |
tmnxDot1agCfmV8v0Groups OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.52.2.12 |
tmnxDot1agCfmV9v0Groups OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.52.2.13 |
tmnxDot1agCfmV10v0Groups OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.52.2.14 |
tmnxDot1agCfmV11v0Groups OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.52.2.15 |
tmnxDot1agMIBObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.52 |
tmnxDot1agCfmStack OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.52.1 |
tmnxDot1agCfmSdpBindStackTableThere is one CFM Sdp-Bind Stack table per bridge. It permits
the retrieval of information about the Maintenance Points
configured on any given Sdp bindings. SEQUENCE OF TmnxDot1agCfmSdpBindStackEntry .1.3.6.1.4.1.6527.3.1.2.52.1.1 |
tmnxDot1agCfmSdpBindStackEntryA conceptual row in the tmnxDot1agCfmSdpBindStackTable. This row behaves
exactly like the dot1agCfmStackEntry row. TmnxDot1agCfmSdpBindStackEntry .1.3.6.1.4.1.6527.3.1.2.52.1.1.1 |
tmnxDot1agCfmSdpBindStackSdpIdThe value of tmnxDot1agCfmSdpBindStackSdpId specifies the
Bridge Port or aggregated port on which MEPs or MHFs
might be configured. SdpId (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.52.1.1.1.1 |
tmnxDot1agCfmSdpBindStackVcIdThe value of tmnxDot1agCfmSdpBindStackVcId specifies, along with
tmnxDot1agCfmSdpBindStackSdpId, the SDP Binding for the bridge. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.1.1.1.2 |
tmnxDot1agCfmSdpBindStackMdLevelThe value of tmnxDot1agCfmSdpBindStackMdLevel specifies the MD Level of
the Maintenance Point. Dot1agCfmMDLevel .1.3.6.1.4.1.6527.3.1.2.52.1.1.1.3 |
tmnxDot1agCfmSdpBindStackDirectionThe value of tmnxDot1agCfmSdpBindStackDirection specifies the
Direction in which the MP faces on the Bridge Port Dot1agCfmMpDirection .1.3.6.1.4.1.6527.3.1.2.52.1.1.1.4 |
tmnxDot1agCfmSdpBindStackMdIndexThe value of tmnxDot1agCfmSdpBindStackMdIndex indicates the index
of the Maintenance Domain in the dot1agCfmMdTable to which the
MP is associated, or 0, if none.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.1.1.1.5 |
tmnxDot1agCfmSdpBindStackMaIndexThe value of tmnxDot1agCfmSdpBindStackMaIndex indicates the index
of the MA in the dot1agCfmMaNetTable and dot1agCfmMaCompTable
to which the MP is associated, or 0, if none.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.1.1.1.6 |
tmnxDot1agCfmSdpBindStackMepIdThe value of tmnxDot1agCfmSdpBindStackMepId indicates if an MEP
is configured, the MEPID, else 0ro Dot1agCfmMepIdOrZero .1.3.6.1.4.1.6527.3.1.2.52.1.1.1.7 |
tmnxDot1agCfmSdpBindStackMacAddressThe value of tmnxDot1agCfmSdpBindStackMacAddress indicates
the MAC address of the MP.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.1.1.1.8 |
tmnxDot1agCfmStackTableThere is one CFM Stack table per bridge. It permits
the retrieval of information about the Maintenance Points
configured on any given interface. SEQUENCE OF TmnxDot1agCfmStackEntry .1.3.6.1.4.1.6527.3.1.2.52.1.2 |
tmnxDot1agCfmStackEntryThe Stack table entry TmnxDot1agCfmStackEntry .1.3.6.1.4.1.6527.3.1.2.52.1.2.1 |
tmnxDot1agCfmStackifIndexThis object represents the Bridge Port or aggregated port
on which MEPs or MHFs might be configured.
Upon a restart of the system, the system SHALL, if necessary,
change the value of this variable, and rearrange the
dot1agCfmStackTable, so that it indexes the entry in the
interface table with the same value of ifAlias that it
indexed before the system restart. If no such entry exists,
then the system SHALL delete all entries in the
dot1agCfmStackTable with the interface index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.52.1.2.1.1 |
tmnxDot1agCfmStackVlanIdOrNoneVLAN ID to which the MP is attached, or 0, if none. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.1.2.1.2 |
tmnxDot1agCfmStackMdLevelMD Level of the Maintenance Point. Dot1agCfmMDLevel .1.3.6.1.4.1.6527.3.1.2.52.1.2.1.3 |
tmnxDot1agCfmStackDirectionDirection in which the MP faces on the Bridge Port Dot1agCfmMpDirection .1.3.6.1.4.1.6527.3.1.2.52.1.2.1.4 |
tmnxDot1agCfmStackMdIndexThe index of the Maintenance Domain in the dot1agCfmMdTable
to which the MP is associated, or 0, if none.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.1.2.1.5 |
tmnxDot1agCfmStackMaIndexThe index of the MA in the dot1agCfmMaNetTable and
dot1agCfmMaCompTable to which the MP is associated, or 0, if
none.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.1.2.1.6 |
tmnxDot1agCfmStackMepIdIf an MEP is configured, the MEPID, else 0ro Dot1agCfmMepIdOrZero .1.3.6.1.4.1.6527.3.1.2.52.1.2.1.7 |
tmnxDot1agCfmStackMacAddressMAC address of the MP.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.1.2.1.8 |
tmnxDot1agCfmStackMPTypeThe value of tmnxDot1agCfmStackMPType indicates the entity that the
MP is configured on:
sap(1) MP is configured on a SAP
ethTun(2) MP is configured on an ethernet-tunnel
ethRing(3) MP is configured on an ethernet-ring
facPort(4) MP is configured on a facility port
facInterface(5) MP is configured on a facility interfacero Enumeration .1.3.6.1.4.1.6527.3.1.2.52.1.2.1.9 |
tmnxDot1agCfmVStackTableThere is one CFM Virtual Stack entry per service. It permits
the retrieval of information about the Maintenance Points
configured on any given virtual Maintenance Association End
Point (MEP). SEQUENCE OF TmnxDot1agCfmVStackEntry .1.3.6.1.4.1.6527.3.1.2.52.1.3 |
tmnxDot1agCfmVStackEntryA conceptual row in the tmnxDot1agCfmVStackTable.
There exists one row for each configured virtual MEP in the system.
Rows are created and destroyed based on the existence of a virtual MEP. TmnxDot1agCfmVStackEntry .1.3.6.1.4.1.6527.3.1.2.52.1.3.1 |
tmnxDot1agCfmVStackSvcIdThe value of tmnxDot1agCfmVStackSvcId specifies the
service on which MEPs might be configured. TmnxServId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.52.1.3.1.1 |
tmnxDot1agCfmVStackMdLevelThe value of tmnxDot1agCfmVStackMdLevel specifies the Maintenance
Domain (MD) Level of the Maintenance Point. Dot1agCfmMDLevel .1.3.6.1.4.1.6527.3.1.2.52.1.3.1.2 |
tmnxDot1agCfmVStackDirectionThe value of tmnxDot1agCfmVStackDirection specifies the
direction in which the Maintenance Point (MP) faces on the service. Dot1agCfmMpDirection .1.3.6.1.4.1.6527.3.1.2.52.1.3.1.3 |
tmnxDot1agCfmVStackMdIndexThe value of tmnxDot1agCfmVStackMdIndex indicates the index
of the Maintenance Domain in the dot1agCfmMdTable to which the
Maintenance Point (MP) is associated, or 0, if none.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.1.3.1.4 |
tmnxDot1agCfmVStackMaIndexThe value of tmnxDot1agCfmVStackMaIndex indicates the index
of the Maintenance Association (MA) in the dot1agCfmMaNetTable
and dot1agCfmMaCompTable to which the Maintenance Point (MP) is
associated, or 0, if none.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.1.3.1.5 |
tmnxDot1agCfmVStackMepIdThe value of tmnxDot1agCfmVStackMepId indicates if an MEP
is configured, the MEPID, else 0.ro Dot1agCfmMepIdOrZero .1.3.6.1.4.1.6527.3.1.2.52.1.3.1.6 |
tmnxDot1agCfmVStackMacAddressThe value of tmnxDot1agCfmVStackMacAddress indicates
the MAC address of the MP.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.1.3.1.7 |
tmnxDot1agCfmPVStackTableThere is one CFM Stack table per bridge. It permits the retrieval of
information about the Maintenance Points (MP) configured on any given
interface. SEQUENCE OF TmnxDot1agCfmPVStackEntry .1.3.6.1.4.1.6527.3.1.2.52.1.4 |
tmnxDot1agCfmPVStackEntryThe Primary VLAN-ID Stack table entry. Entries in this table are MEPs
configured to use the primary VLAN-ID of the Maintenance Association
(MA). TmnxDot1agCfmPVStackEntry .1.3.6.1.4.1.6527.3.1.2.52.1.4.1 |
tmnxDot1agCfmPVStackifIndexThis object represents the Bridge Port or aggregated port
on which MEPs or MHFs might be configured. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.52.1.4.1.1 |
tmnxDot1agCfmPVStackVlanIdOrNoneVLAN ID to which the MP is attached, or 0, if none. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.1.4.1.2 |
tmnxDot1agCfmPVStackPriVlanIdThe Primary VLAN ID with which the Maintenance Association is
associated. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.1.4.1.3 |
tmnxDot1agCfmPVStackMdLevelMD Level of the Maintenance Point. Dot1agCfmMDLevel .1.3.6.1.4.1.6527.3.1.2.52.1.4.1.4 |
tmnxDot1agCfmPVStackDirectionDirection in which the MP faces on the Bridge Port Dot1agCfmMpDirection .1.3.6.1.4.1.6527.3.1.2.52.1.4.1.5 |
tmnxDot1agCfmPVStackMdIndexThe index of the Maintenance Domain in the dot1agCfmMdTable
to which the MP is associated, or 0, if none.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.1.4.1.6 |
tmnxDot1agCfmPVStackMaIndexThe index of the MA in the dot1agCfmMaNetTable and
dot1agCfmMaCompTable to which the MP is associated, or 0, if
none.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.1.4.1.7 |
tmnxDot1agCfmPVStackMepIdIf an MEP is configured, the MEPID, else 0ro Dot1agCfmMepIdOrZero .1.3.6.1.4.1.6527.3.1.2.52.1.4.1.8 |
tmnxDot1agCfmPVStackMacAddressMAC address of the MP.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.1.4.1.9 |
tmnxDot1agCfmGlobalObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.52.2 |
tmnxDot1agCfmMcLagConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.52.2.1 |
tmnxDot1agCfmMcLagStdbyInactiveThe value of tmnxDot1agCfmMcLagStdbyInactive specifies whether or not
ETH-CFM MEPs configured on Multi-Chassis LAG ports are aware of MC-LAG
port active/standby states.
When this object is 'true (1)', MEPs configured on a Multi-Chassis
LAG port will act as if they are administratively shutdown if running
on a standby port, and will only be operational on an active MC-LAG
port.
When this object is 'false (2)', MEPs configured on a Multi-Chassis
LAG port will operate regardless of the MC-LAG port active and standby
states.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.2.1.1 |
tmnxDot1agCfmMcLagPropHoldTimeThe value of tmnxDot1agCfmMcLagPropHoldTime specifies the duration, in
seconds, of a timer that is activated when an MC-LAG port or protocol
changes state. While the timer is active, no fault set or clear is
propagated to the MC-LAG SAP's CFM MEP.
The outstanding hold time can be monitored by polling the value of
sapEthCfmMcLagPropHoldTimeRemain for a particular SAP. When set to
the value zero (0), no delay in response to a port or protocol change
will be observed.
This object is meaningful only when tmnxDot1agCfmMcLagStdbyInactive is
set to the value 'enabled (1)', otherwise an SNMP Set operation will
result in an inconsistentValue error and the result of an SNMP Get
operation will be undefined.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.2.1.2 |
tmnxDot1agCfmSLMConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.52.2.2 |
tmnxDot1agCfmSLMInactivityTimerThe value of tmnxDot1agCfmSLMInactivityTimer specifies the duration,
in seconds, that the system will maintain Synthetic Loss Measurement
(SLM) reply (SLR) data for individual two-way tests in the absence of
receiving SLM frames.
The system may be blocked in responding to new two-way SLM tests due to
an excessive inactive timer duration. In this case, reducing this
object's value, thus reducing the retention time for existing latent
SLR test data, will help free test resources allowing the system to
respond to new two-way SLM tests.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.2.2.1 |
tmnxDot1agCfmStatisticsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.52.2.3 |
tmnxDot1agCfmGlobalPacketStats OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.52.2.3.1 |
tmnxDot1agCfmGlobalPacketRxCountThe value of tmnxDot1agCfmGlobalPacketRxCount indicates the number of
received ETH-CFM packets.ro Counter32 UNITS "packets" .1.3.6.1.4.1.6527.3.1.2.52.2.3.1.1 |
tmnxDot1agCfmGlobalPacketTxCountThe value of tmnxDot1agCfmGlobalPacketTxCount indicates the number of
transmitted ETH-CFM packets.ro Counter32 UNITS "packets" .1.3.6.1.4.1.6527.3.1.2.52.2.3.1.2 |
tmnxDot1agCfmGlobalPacketDroppedThe value of tmnxDot1agCfmGlobalPacketDropped indicates the number of
packets dropped by ETH-CFM. A packet is dropped because of resource
contention.ro Counter32 UNITS "packets" .1.3.6.1.4.1.6527.3.1.2.52.2.3.1.3 |
tmnxDot1agCfmGlobalPacketDiscardThe value of tmnxDot1agCfmGlobalPacketDiscard indicates the number of
packets discarded by ETH-CFM. A packet may be discarded for several
reasons including, but not limited to, malformed PDU, invalid TLVs,
MEP admin down, etc.ro Counter32 UNITS "packets" .1.3.6.1.4.1.6527.3.1.2.52.2.3.1.4 |
tmnxDot1agCfmComponentLimitTableThe tmnxDot1agCfmComponentLimitTable stores the current resource counts
as well as their resource limits for Ethernet Connectivity Fault
Management (ETH-CFM) components in the SROS series system. SEQUENCE OF TmnxDot1agCfmComponentLimitEntry .1.3.6.1.4.1.6527.3.1.2.52.2.3.2 |
tmnxDot1agCfmComponentLimitEntryThe tmnxDot1agCfmComponentLimitEntry consists of the resource limits
for a particular component of ETH-CFM.
Rows are managed by the system and can not be created or destroyed using
SNMP set requests. TmnxDot1agCfmComponentLimitEntry .1.3.6.1.4.1.6527.3.1.2.52.2.3.2.1 |
tmnxDot1agCfmCompMajorIndexThe value of tmnxDot1agCfmCompMajorIndex specifies the major identifier
of the ETH-CFM component. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.2.3.2.1.1 |
tmnxDot1agCfmCompMinorIndexThe value of tmnxDot1agCfmCompMinorIndex specifies the minor identifier
of the ETH-CFM component. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.2.3.2.1.2 |
tmnxDot1agCfmCompNameThe value of tmnxDot1agCfmCompName indicates the name of the ETH-CFM
component.ro TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.52.2.3.2.1.3 |
tmnxDot1agCfmCompResourceUsageThe value of tmnxDot1agCfmCompResourceUsage indicates the current
resource usage for the ETH-CFM component.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.2.3.2.1.4 |
tmnxDot1agCfmCompResourceLimitThe value of tmnxDot1agCfmCompResourceLimit indicates the maximum
resource usage limit for the ETH-CFM component for the
SROS series system.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.2.3.2.1.5 |
tmnxDot1agCfmSystemScalarsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.52.2.4 |
tmnxDot1agCfmGraceTxEnableThe value of tmnxDot1agCfmGraceTxEnable specifies whether or not grace
period notifications will be sent to the ETH-CFM remote MEP peers. The
value 'true' enables grace period notifications, and the value 'false'
suppresses the notifications.
During an outage, the modification of this object from 'true' to
'false' will cause an immediate clear of all grace period
notifications, after which no further notifications will be sent. A
modification of this object from 'false' to 'true' will not enable the
transmission of grace period for any outages currently in progress but
will take effect for subsequent outages.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.2.4.1 |
tmnxDot1agCfmGracePeriodThe value of tmnxDot1agCfmGracePeriod indicates whether or not the
node is locally executing a grace period. A value of 'true' indicates
that all peer timeouts are extended locally and eligible MEPs are
transmitting grace period information. A value of 'false' indicates
no grace period information is transmitted and standard values are
used for timing out remote peers.
Note that for a local MEP to be eligible for grace period transmission
it must be admin up and ccm-enabled. Additionally, for any
transmission to occur tmnxDot1agCfmGraceTxEnable must be set to
'true'.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.2.4.2 |
tmnxDot1agCfmManagementObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.52.3 |
tmnxDot1agCfmMepMgmtTableThe tmnxDot1agCfmMepMgmtTable manages the row creation and deletion of
dot1agCfmMepTable rows. This table replaces the standard row creation
model for Dot1ag CFM MEPs to better facilitate Alcatel-Lucent SROS
series requirements. The use of writing to the
IEEE-8021-CFM-MIB::dot1agCfmMepRowStatus object is deprecated and should
be discouraged in favour of this table. SEQUENCE OF TmnxDot1agCfmMepMgmtEntry .1.3.6.1.4.1.6527.3.1.2.52.3.1 |
tmnxDot1agCfmMepMgmtEntryThe tmnxDot1agCfmMepMgmtEntry consists of the configuration objects
used for the purpose of row creation for Alcatel-Lucent SROS Dot1ag
MEPs. To create a MEP one must specify its type and endpoint
association. TmnxDot1agCfmMepMgmtEntry .1.3.6.1.4.1.6527.3.1.2.52.3.1.1 |
tmnxDot1agCfmMepMgmtRowStatusThe value of tmnxDot1agCfmMepMgmtRowStatus specifies the row status of
the dot1ag CFM MEP. This object replaces the use of the
IEEE-8021-CFM-MIB::dot1agCfmMepRowStatus object.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.3.1.1.1 |
tmnxDot1agCfmMepMgmtTypeThe value of tmnxDot1agCfmMepMgmtType specifies the endpoint type that
this MEP facilitates.
default (0)
facilityPort (1)
facilityInterface (2)
sapPrimaryVlan (3)
from the MA Comp Table. This is only
applicable if the MA primary VLAN ID is
set to a value other than zero (0).
This object must be specified during row creation.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.52.3.1.1.2 |
tmnxDot1agCfmMepMgmtServiceIdThe value of tmnxDot1agCfmMepMgmtServiceId specifies the service to
which the virtual MEP is attached.
This object refers directly to
TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmMepSvcId.
This object may be specified during row creation when
tmnxDot1agCfmMepMgmtType is set to the value 'default'.rw TmnxServId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.52.3.1.1.3 |
tmnxDot1agCfmMepMgmtIfIndexThe value of tmnxDot1agCfmMepMgmtIfIndex specifies, along with
tmnxDot1agCfmMepMgmtPrimaryVid, the interface index of the interface to
which the MEP is attached.
This object refers directly to IEEE8021-CFM-MIB::dot1agCfmMepIfIndex.
This object may be specified during row creation when
tmnxDot1agCfmMepMgmtType is set to either the value 'default' or
'sapPrimaryVlan'.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.52.3.1.1.4 |
tmnxDot1agCfmMepMgmtPrimaryVidThe value of tmnxDot1agCfmMepMgmtPrimaryVid specifies, along with
tmnxDot1agCfmMepMgmtIfIndex, the Primary VID of the MEP.
This object refers directly to
IEEE8021-CFM-MIB::dot1agCfmMepPrimaryVid.
This object must be specified during row creation when
tmnxDot1agCfmMepMgmtIfIndex is specified.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.3.1.1.5 |
tmnxDot1agCfmMepMgmtSdpIdThe value of tmnxDot1agCfmMepMgmtSdpId specifies, along with
tmnxDot1agCfmMepMgmtVcId, the SDP-Binding to which the MEP is attached.
This object refers directly to
TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmMepSdpId.
This object may be specified during row creation when
tmnxDot1agCfmMepMgmtType is set to the value 'default'.rw SdpId (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.52.3.1.1.6 |
tmnxDot1agCfmMepMgmtVcIdThe value of tmnxDot1agCfmMepMgmtVcId specifies, along with
tmnxDot1agCfmMepMgmtSdpId, the SDP-Binding to which the MEP is
attached.
This object refers directly to
TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmMepVcId.
This object must be specified during row creation when
tmnxDot1agCfmMepMgmtSdpId is specified.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.3.1.1.7 |
tmnxDot1agCfmMepMgmtFcltyIfIndexThe value of tmnxDot1agCfmMepMgmtFcltyIfIndex specifies, along with
tmnxDot1agCfmMepMgmtFcltyVlanId, the port or interface to which this
MEP is attached.
This object refers directly to
TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmMepFacilityIfIndex.
This object must be specified during row creation when
tmnxDot1agCfmMepMgmtType is set to a 'facility' value.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.52.3.1.1.8 |
tmnxDot1agCfmMepMgmtFcltyVlanIdThe value of tmnxDot1agCfmMepMgmtFcltyVlanId specifies, along with
tmnxDot1agCfmMepMgmtFcltyIfIndex, the port or interface to which this
MEP is attached.
This object refers directly to
TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmMepFacilityVlanId.
This object must be specified during row creation when
tmnxDot1agCfmMepMgmtFcltyIfIndex is specified.rw VlanIdOrNone .1.3.6.1.4.1.6527.3.1.2.52.3.1.1.9 |
tmnxDot1agCfmMepMgmtDirectionThe value of tmnxDot1agCfmMepMgmtDirection specifies the direction in
which the MEP faces on the Bridge port.
This object refers directly to
IEEE8021-CFM-MIB::dot1agCfmMepDirection.
This object applies to any MEP type as specified by the object
tmnxDot1agCfmMepMgmtType.rw Dot1agCfmMpDirection .1.3.6.1.4.1.6527.3.1.2.52.3.1.1.50 |
tmnxDot1agCfmMa OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.52.6 |
tmnxDot1agCfmMaNetTableThe tmnxDot1agCfmMaNetTable AUGMENTS the standard MIB table,
dot1agCfmMaNetTable. This table is used to enhance Maintenance
Association functionality for Ethernet Connectivity Fault Management
(ETH-CFM). SEQUENCE OF TmnxDot1agCfmMaNetEntry .1.3.6.1.4.1.6527.3.1.2.52.6.1 |
tmnxDot1agCfmMaNetEntryThe tmnxDot1agCfmMaNetEntry consists of the configuration objects
used to enhance the Maintenance Association functionality. TmnxDot1agCfmMaNetEntry .1.3.6.1.4.1.6527.3.1.2.52.6.1.1 |
tmnxDot1agCfmMaNetHoldDownTimerThe value of tmnxDot1agCfmMaNetHoldDownTimer specifies the time, in
centiseconds, that a MEP in the association will delay declaring a
fault. This delay is added on to the existing
3.5 * dot1agCfmMaNetCcmInterval value used to determine if a
connectivity fault to the peer should be raised.
A value of zero (0) indicates that no additional delay should be
added to the existing 3.5 * dot1agCfmMaNetCcmInterval value.rw Unsigned32 (0|1..1000) UNITS "centiseconds" .1.3.6.1.4.1.6527.3.1.2.52.6.1.1.1 |
tmnxDot1agCfmMaNetTotalMEPCountThe value of tmnxDot1agCfmMaNetTotalMEPCount indicates the number of
unique MEPs configured (both local and remote) that are associated with
this MA.
When the number of MEPs exceed the normal MA limits, the MA is
considered to be an extended MA and will use a resource from the
'Extended MA' resource entry in tmnxDot1agCfmComponentLimitTable.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.52.6.1.1.2 |
tmnxDot1agCfmMaMepListTableThe tmnxDot1agCfmMaMepListTable extends the functionality of the
dot1agCfmMaMepListTable for the SROS series systems. SEQUENCE OF TmnxDot1agCfmMaMepListEntry .1.3.6.1.4.1.6527.3.1.2.52.6.3 |
tmnxDot1agCfmMaMepListEntryThe tmnxDot1agCfmMaMepListEntry augments the standard MIB entry
for the purpose of extending functionality for the SROS series
systems for the Dot1ag CFM MEP Lists. Rows are created and destroyed
by the system through the row status field in dot1agCfmMaMepListEntry. TmnxDot1agCfmMaMepListEntry .1.3.6.1.4.1.6527.3.1.2.52.6.3.1 |
tmnxDot1agCfmMaMepListMacAddressThe value of tmnxDot1agCfmMaMepListMacAddress specifies the target
unicast MAC address used for transmitting CFM packets to the remote
MEPs for the specified MEPID.
Setting a unicast MAC address restricts the number of MEPIDs that can
be configured for an individual MA to a maximum of one (1). Setting the
address back to the default value will remove this restriction and will
result in the regular CCM multicast address being used. This value
cannot be set to any multicast or broadcast address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.6.3.1.1 |
tmnxDot1agCfmMep OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.52.7 |
tmnxDot1agCfmMepTableThis table augments the Maintenance Association End Point (MEP) table
of the IEEE8021-CFM-MIB. SEQUENCE OF TmnxDot1agCfmMepEntry .1.3.6.1.4.1.6527.3.1.2.52.7.1 |
tmnxDot1agCfmMepEntryA conceptual row in the tmnxDot1agCfmMepTable. This row exists only
if the association dot1agCfmMepEntry is active. TmnxDot1agCfmMepEntry .1.3.6.1.4.1.6527.3.1.2.52.7.1.1 |
tmnxDot1agCfmMepSdpIdThe value of tmnxDot1agCfmMepSdpId specifies, along with the
tmnxDot1agCfmMepVcId, the SDP-Binding within a bridge port,
to which the MEP is attached.
This object is applicable to SDP-Bindings only, and MUST be set
to the null ID (0) when dot1agCfmMepIfIndex, dot1agCfmMepPrimaryVid,
tmnxDot1agCfmMepSvcId, tmnxDot1agCfmMepFacilityIfIndex,
tmnxDot1agCfmMepFacilityVlanId, or tmnxDot1agCfmMepFacilityType is
non-zero. When this object is applicable (non-zero), the above objects
MUST be set to zero (0).
Once set, this object can not be modified.rw SdpId (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.1 |
tmnxDot1agCfmMepVcIdThe value of tmnxDot1agCfmMepVcId specifies, along with
tmnxDot1agCfmMepSdpId, the SDP Binding for the bridge.
tmnxDot1agCfmMepVcId is applicable to SDP-Bindings only, and MUST
be set to zero (0) when dot1agCfmMepIfIndex, dot1agCfmMepPrimaryVid
tmnxDot1agCfmMepSvcId, tmnxDot1agCfmMepFacilityIfIndex,
tmnxDot1agCfmMepFacilityVlanId, or tmnxDot1agCfmMepFacilityType is
non-zero. When this object is applicable (non-zero), the above objects
MUST be set to zero (0).
Once set, this object can not be modified.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.2 |
tmnxDot1agCfmMepMacAddressThe value of tmnxDot1agCfmMepMacAddress specifies the mac-address
that is assigned to dot1agCfmMepMacAddress.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.3 |
tmnxDot1agCfmMepAisEnableThe value of tmnxDot1agCfmMepAisEnable specifies whether AIS
frames are generated from the Maintenance Entity Group (MEG).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.4 |
tmnxDot1agCfmMepAisMegLevelThe value of tmnxDot1agCfmMepAisMegLevel specifies the levels
that should be notified to suppress alarms resulting from defect
conditions detected by the MEP.rw Bits .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.5 |
tmnxDot1agCfmMepAisPriorityThe value of tmnxDot1agCfmMepAisPriority specifies at what priority
the AIS frames should be transmitted.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.6 |
tmnxDot1agCfmMepAisIntervalThe value of tmnxDot1agCfmMepAisInterval specifies at what intervals
to transmit AIS frames.rw Unsigned32 (1 | 60) UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.7 |
tmnxDot1agCfmMepEthRxAisIntervalThe value of tmnxDot1agCfmMepEthRxAisInterval indicates the AIS
Interval received in the last AIS Frame.ro Unsigned32 (1 | 60) UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.8 |
tmnxDot1agCfmMepEthRxAisThe value of tmnxDot1agCfmMepEthRxAis indicates the MEP is receiving
AIS test frames from one or more of its sub-layer MEPs.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.9 |
tmnxDot1agCfmMepEthAisTxCountThe value of tmnxDot1agCfmMepEthAisTxCount indicates number of
AIS frames transmitted on the MEP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.10 |
tmnxDot1agCfmMepEthTestEnableThe value of tmnxDot1agCfmMepEthTestEnable specifies whether
ethernet test frames are to be generated on transmission or
processed on reception. If this object is set to 'false',
then tmnxDot1agCfmMepEthTestPattern is undefined.
When this object is set to 'true', tmnxDot1agCfmMepEthTestPattern
is reset to its default value, unless tmnxDot1agCfmMepEthTestPattern
is set to a specific value in the same SNMP PDU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.11 |
tmnxDot1agCfmMepEthTestPatternThe value of tmnxDot1agCfmMepEthTestPattern specifies the data-content
of the AIS test frames. 'allZerosNoCrc (0)' and 'allZerosCrc (1)'
specifies the data content as all zero values (without and with CRC
calculations respectively). 'prbsNoCrc (3) and 'prbsCrc (4) specifies
the data content as pseudo random bit sequence (without and with CRC
calculations respectively). 'allOnesNoCrc (4)' and 'allOnesCrc (5)',
specifies the data content as all ones (without and with CRC
calculations respectively).
This object is only applicable if tmnxDot1agCfmMepEthTestEnable is set
to 'true'.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.12 |
tmnxDot1agCfmMepEthTestMacAddrThe value of tmnxDot1agCfmMepEthTestMacAddr specifies the MAC address
of the target to whom the Eth-test frames are sent.
Setting this object will trigger the test frame to be sent. Once the
test is complete, the object will revert to the default value,
indicating that another test is possible.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.13 |
tmnxDot1agCfmMepEthTestDataLenThe value of tmnxDot1agCfmMepEthTestDataLen specifies the length of the
data sent in an Eth-test frame. The contents of the data is specified
by the tmnxDot1agCfmMepEthTestPattern object.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.14 |
tmnxDot1agCfmMepEthTestPriorityThe value of tmnxDot1agCfmMepEthTestPriority specifies the priority
used in generating Eth-Test frames.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.15 |
tmnxDot1agCfmMepOWDTMacAddressThe value of tmnxDot1agCfmMepOWDTMacAddress specifies the MAC address
used as a target for the One-Way-Delay Test (OWDT).
Setting this object will trigger a One-Way-Delay test to the specified
MAC address.
Upon completion of the test, the MacAddress will revert to it's
default value, indicating that another test is possible.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.16 |
tmnxDot1agCfmMepOWDTPriorityThe value of tmnxDot1agCfmMepOWDTPriority specifies the priority used
in the generated test frame for the One-Way-Delay test.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.17 |
tmnxDot1agCfmMepTWDTMacAddressThe value of tmnxDot1agCfmMepTWDTMacAddress specifies the MAC address
used as a target for the Two-Way-Delay Test (TWDT).
Setting this object will trigger a Two-Way-Delay test to the specified
MAC address.
Upon completion of the test, the MacAddress will revert to it's
default value, indicating that another test is possible.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.18 |
tmnxDot1agCfmMepTWDTPriorityThe value of tmnxDot1agCfmMepTWDTPriority specifies the priority used
in the generated test frame for the Two-Way-Delay test.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.19 |
tmnxDot1agCfmMepSvcIdThe value of tmnxDot1agCfmMepSvcId specifies the service to which the
virtual MEP is attached.
tmnxDot1agCfmMepSvcId is applicable to virtual MEPs only, and MUST
be set to zero (0) when dot1agCfmMepIfIndex, dot1agCfmMepPrimaryVid,
tmnxDot1agCfmMepSdpId, tmnxDot1agCfmMepVcId,
tmnxDot1agCfmMepFacilityIfIndex, tmnxDot1agCfmMepFacilityVlanId, or
tmnxDot1agCfmMepFacilityType is non-zero. When this object is
applicable (non-zero), the above objects MUST be set to zero (0).
Once set, this object can not be modified.rw TmnxServId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.20 |
tmnxDot1agCfmMepControlMepThe value of tmnxDot1agCfmMepControlMep specifies whether or not the
operational state of the MEP is used by the management entity over
which this MEP is configured.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.21 |
tmnxDot1agCfmMepEthTestThresholdThe value of tmnxDot1agCfmMepEthTestThreshold specifies when a
tmnxDot1agCfmMepEthTestComplete notification is sent. If
tmnxDot1agCfmMepEthTestThreshold is set to zero (0), a notification is
sent on the completion of any test for this MEP. Otherwise the
threshold must be exceeded and/or CRC failures must be detected to
send the notification.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.22 |
tmnxDot1agCfmMepOWDTThresholdThe value of tmnxDot1agCfmMepOWDTThreshold specifies when a
tmnxDot1agCfmMepDMTestComplete notification is sent for a one-way-delay
test. If tmnxDot1agCfmMepOWDTThreshold is set to zero (0), a
notification is sent on the completion of any one-way-delay-test for
this MEP. Otherwise the threshold must be exceeded to send the
notification.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.23 |
tmnxDot1agCfmMepFaultPropagationThe value of tmnxDot1agCfmMepFaultPropagation specifies what action
should be taken by the MEP if a fault is detected in the service
containing the MEP. It also specifies if the MEP should propagate
a fault that it has detected into the service.
When this object is set to 'disabled (0)', no additional fault
propagation will occur. When this object is set to 'useIfStatusTLV
(1)', the MEP will send an interface status TLV in the next CCM
indicating fault when fault is detected, even if the MEP itself has
not detected a fault. When this object is set to 'suspendCCM (2)',
faults will be propagated by stopping the regular CCM transmissions
entirely. Once the fault is cleared, the regular CCM transmissions
will resume. Additionally, when the value of
tmnxDot1agCfmMepFaultPropagation is different than 'disabled (0)', a
defect detected by the MEP will be propagated into the service.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.24 |
tmnxDot1agCfmMepFacilityIfIndexThe value of tmnxDot1agCfmMepFacilityIfIndex specifies, along with
tmnxDot1agCfmMepFacilityVlanId and tmnxDot1agCfmMepFacilityType,
the port or interface associated with this MEP.
The tmnxDot1agCfmMepFacilityIfIndex is applicable to facility MEPs
only, and MUST be set to zero (0) when dot1agCfmMepIfIndex,
dot1agCfmMepPrimaryVid, tmnxDot1agCfmMepSdpId, tmnxDot1agCfmMepVcId,
or tmnxDot1agCfmMepSvcId is non-zero. When this object is applicable
(non-zero), the above objects MUST be set to zero (0).
Once set, this object can not be modified.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.25 |
tmnxDot1agCfmMepFacilityVlanIdThe value of tmnxDot1agCfmMepFacilityVlanId specifies, along with
tmnxDot1agCfmMepFacilityIfIndex and tmnxDot1agCfmMepFacilityType,
the encapsulation value of the port or interface
associated with this MEP.
The tmnxDot1agCfmMepFacilityVlanId is applicable to facility MEPs only,
and MUST be set to zero (0) when dot1agCfmMepIfIndex,
dot1agCfmMepPrimaryVid, tmnxDot1agCfmMepSdpId, tmnxDot1agCfmMepVcId,
or tmnxDot1agCfmMepSvcId is non-zero. When this object is applicable
(non-zero), the above objects MUST be set to zero (0).
Once set, this object can not be modified.rw VlanIdOrNone .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.26 |
tmnxDot1agCfmMepFacilityTypeThe value of tmnxDot1agCfmMepFacilityType specifies, along with
tmnxDot1agCfmMepFacilityIfIndex and tmnxDot1agCfmMepFacilityVlanId,
whether the port or interface is associated with this MEP.
The tmnxDot1agCfmMepFacilityType is applicable to facility MEPs only,
and MUST be set to 'nonFacilityType (0)' when dot1agCfmMepIfIndex,
dot1agCfmMepPrimaryVid, tmnxDot1agCfmMepSdpId, tmnxDot1agCfmMepVcId,
or tmnxDot1agCfmMepSvcId is non-zero. When this object is applicable
(non-zero), the above objects MUST be set to zero (0).
Once set, this object can not be modified.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.27 |
tmnxDot1agCfmMepFcltyFaultNotifyThe value of tmnxDot1agCfmMepFcltyFaultNotify specifies whether or not
a fault detected on this Facility MEP will notify the port or facility
tunnel associated to this MEP.
This object pertains to Facility MEPs only. Attempting to change this
object away from its default for a non-facility MEP will result in an
'inconsistentValue' error.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.28 |
tmnxDot1agCfmMepDescriptionThe value of tmnxDot1agCfmMepDescription specifies a user supplied
detailed description for this ETH-CFM MEP.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.29 |
tmnxDot1agCfmMepMcLagInactiveThe value of tmnxDot1agCfmMepMcLagInactive indicates whether or not the
MEP is inactive, 'standby (2)', due to the MC-LAG standby state. The
value of tmnxDot1agCfmMcLagStdbyInactive must be set to 'true (1)' for
this object to have meaning and return anything other than
'notApplicable (0)'.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.30 |
tmnxDot1agCfmMepCcmPaddingSizeThe value of tmnxDot1agCfmMepCcmPaddingSize specifies the number of
additional octets inserted into the CCM PDU for the Data TLV padding.
If tmnxDot1agCfmMepCcmPaddingSize is set to zero (0), no Data TLV will
be added to the CCM PDUs.rw Unsigned32 (0|3..1500) .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.31 |
tmnxDot1agCfmMepCcmIgnoreTLVsThe value of tmnxDot1agCfmMepCcmIgnoreTLVs specifies the set of TLVs
that are received in a CCM PDU for the Remote MEP state machine of the
MEP that will be validated for format correctness but their values will
be ignored and marked 'Absent' by ETH-CFM.rw Bits .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.32 |
tmnxDot1agCfmMepTypeThe value of tmnxDot1agCfmMepType specifies the endpoint type that
this MEP facilitates.
default (0)
facilityPort (1)
facilityInterface (2)
sapPrimaryVlan (3)
from the MA Comp Table. This is only
applicable if the MA primary VLAN ID is
set to a value other than zero (0).
This object must be specified during row creation.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.100 |
tmnxDot1agCfmMepDmEnableThe value of tmnxDot1agCfmMepDmEnable specifies whether
Delay measurement is enabled or disabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.101 |
tmnxDot1agCfmMepEthTestRsltTableThe tmnxDot1agCfmMepEthTestRsltTable indicates the results of
all eth-tests indexed by the originating MAC addresses.
This table is not persistent over reboots of the chassis. SEQUENCE OF TmnxDot1agCfmMepEthTestRsltEntry .1.3.6.1.4.1.6527.3.1.2.52.7.2 |
tmnxDot1agCfmMepEthTestRsltEntryThe MEG result table. TmnxDot1agCfmMepEthTestRsltEntry .1.3.6.1.4.1.6527.3.1.2.52.7.2.1 |
tmnxDot1agCfmMepSrcMacAddressThe value of tmnxDot1agCfmMepSrcMacAddress indicates the MAC address
of the issuer of the eth-test. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.7.2.1.1 |
tmnxDot1agCfmMepFrameCountThe value of tmnxDot1agCfmMepFrameCount indicates the number of frames
received from the issuer of the eth-test.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.52.7.2.1.2 |
tmnxDot1agCfmMepByteCountThe value of tmnxDot1agCfmMepByteCount indicates the number of bytes
received from the issuer of the eth-test.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.52.7.2.1.3 |
tmnxDot1agCfmMepFailedBitsThe value of tmnxDot1agCfmMepFailedBits indicates the accumulated
number of bits that did not match the test-pattern in all received
Eth-Tst frames since tmnxDot1agCfmMepEthTestEnable is configured
from 'false' to 'true'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.52.7.2.1.4 |
tmnxDot1agCfmMepCrcFailuresThe value of tmnxDot1agCfmMepCrcFailures indicates the accumulated
number of CRC checksum failures.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.52.7.2.1.5 |
tmnxDot1agCfmMepCurrByteCountThe value of tmnxDot1agCfmMepCurrByteCount indicates the number of
bytes contained in the most recently received Eth-Tst frame Test TLV.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.52.7.2.1.6 |
tmnxDot1agCfmMepCurrFailedBitsThe value of tmnxDot1agCfmMepCurrFailedBits indicates the number of
bits that did not match the test-pattern in the most recently received
Eth-Tst frame.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.52.7.2.1.7 |
tmnxDot1agCfmMepCurrCrcFailuresThe value of tmnxDot1agCfmMepCurrCrcFailures indicates that CRC errors
were detected in the most recently received Eth-Tst frame.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.7.2.1.8 |
tmnxDot1agCfmMepDelayRsltTableThe tmnxDot1agCfmMepDelayRsltTable indicates the results of
all the One-Way/Two-Way Delay Tests from the originating MAC
addresses.
This table is not persistent over reboots of the chassis. SEQUENCE OF TmnxDot1agCfmMepDelayRsltEntry .1.3.6.1.4.1.6527.3.1.2.52.7.3 |
tmnxDot1agCfmMepDelayRsltEntryThe MEG result table. TmnxDot1agCfmMepDelayRsltEntry .1.3.6.1.4.1.6527.3.1.2.52.7.3.1 |
tmnxDot1agCfmMepDelaySrcMacAddrThe value of tmnxDot1agCfmMepDelaySrcMacAddr indicates the source
MAC address of the issuer of the test. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.7.3.1.1 |
tmnxDot1agCfmMepDelayTestTypeThe value of tmnxDot1agCfmMepDelayTestType indicates the type
of test this row details. Enumeration .1.3.6.1.4.1.6527.3.1.2.52.7.3.1.2 |
tmnxDot1agCfmMepDelayTestDelayThe value of tmnxDot1agCfmMepDelayTestDelay indicates the amount
of time, measured in microseconds, from when the test-frame was
transmitted to the time it was received minus the local processing time
taken by the remote system.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.52.7.3.1.3 |
tmnxDot1agCfmMepDelayVariationThe value of tmnxDot1agCfmMepDelayVariation indicates the amount
of time delay variation, measured in microseconds, from the two
most recent time delay measurementsro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.52.7.3.1.4 |
tmnxDot1agCfmMepSlmTWTestTabletmnxDot1agCfmMepSlmTWTestTable consists of the MEP configuration for
issuing individual Synthetic Loss Measurement tests. SEQUENCE OF TmnxDot1agCfmMepSlmTWTestEntry .1.3.6.1.4.1.6527.3.1.2.52.7.4 |
tmnxDot1agCfmMepSlmTWTestEntrytmnxDot1agCfmMepSlmTWTestEntry contains the configuration for
generating Synthetic Loss Measurement (SLM) Tests for a particular MEP.
A row exists for each row in the dot1agCfmMepTable, and is destroyed
automatically with the removal of a row in the dot1agCfmMepTable.
Results from a two-way SLM test are reported in
tmnxDot1agCfmMepSlmTestRsltTable with the tmnxDot1agCfmMepSlmTestType
set to 'twoWayTest (2)'. TmnxDot1agCfmMepSlmTWTestEntry .1.3.6.1.4.1.6527.3.1.2.52.7.4.1 |
tmnxDot1agCfmMepSlmTWTestStatusThe value of tmnxDot1agCfmMepSlmTWTestStatus specifies the operational
state of the two-way Synthetic Loss Measurement (SLM) test.
To issue a two-way SLM test the user must issue an SNMP SET on this
object with a value 'enabled (1)'. To abort the two-way SLM test issue
an SNMP SET on this object with the value 'disabled (2)'.
A read on this object represents the current state of the two-way SLM
test:
enabled (1) - The test is actively running, and attempts at
modifying any two-way SLM object will be rejected
disabled (2) - The test is not running.
Once the test is complete this object will revert to the default value
'disabled (2)'.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.1 |
tmnxDot1agCfmMepSlmTWTestIdThe value of tmnxDot1agCfmMepSlmTWTestId indicates the test identifier
used to initiate the two-way Synthetic Loss Measurement (SLM) test.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.2 |
tmnxDot1agCfmMepSlmTWMacAddressThe value of tmnxDot1agCfmMepSlmTWMacAddress specifies the MAC address
used as a target for the two-way Synthetic Loss Measurement (SLM) test.
This object MUST be set to a valid MAC Address for proper execution of
the two-way SLM test.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.3 |
tmnxDot1agCfmMepSlmTWPriorityThe value of tmnxDot1agCfmMepSlmTWPriority specifies the priority used
in the generated test frame for the two-way Synthetic Loss Measurement
(SLM) test.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.4 |
tmnxDot1agCfmMepSlmTWIntervalThe value of tmnxDot1agCfmMepSlmTWInterval, in conjuction with
tmnxDot1agCfmMepSlmTWIntrvlUnits, specifies the interval between
Synthetic Loss Measurement (SLM) messages sent by the two-way SLM test.
For example, if tmnxDot1agCfmMepSlmTWInterval has the value 90, and
tmnxDot1agCfmMepSlmTWIntrvlUnits has the value 'centiseconds(2)', the
interval between SLM messages is 0.9 seconds.
The tmnxDot1agCfmMepSlmTWInterval and tmnxDot1agCfmMepSlmTWIntrvlUnits
pair provide support for the following intervals:
0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9 seconds;
1, 2, 3, 4, 5, 6, 7, 8, 9, 10 seconds.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.5 |
tmnxDot1agCfmMepSlmTWTimeoutThe value of tmnxDot1agCfmMepSlmTWTimeout specifies the time-out value,
in seconds, to wait for a Synthetic Loss Measurement (SLM) message to
reply for the two-way SLM test. Upon expiration of the timeout period,
the agent assumes that the message response will not be received. Any
response received after the timeout period has expired is silently
discarded.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.6 |
tmnxDot1agCfmMepSlmTWDataSizeThe value of tmnxDot1agCfmMepSlmTWDataSize specifies the data size,
in bytes, contained in the padding TLV for the two-way Synthetic Loss
Measurement (SLM) test. A value of zero (0) specifies that no padding
TLV is inserted in the SLM packet. Any non-zero value will increase
the packet size by the specified data size plus 3 bytes for the TLV
header.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.7 |
tmnxDot1agCfmMepSlmTWSendCountThe value of tmnxDot1agCfmMepSlmTWSendCount specifies the number of
Synthetic Loss Measurement (SLM) packets to send during the two-way
SLM test.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.8 |
tmnxDot1agCfmMepSlmTWIntrvlUnitsThe value of tmnxDot1agCfmMepSlmTWIntrvlUnits, in conjuction with
tmnxDot1agCfmMepSlmTWInterval, specifies the interval between Synthetic
Loss Measurement (SLM) messages sent by the two-way SLM test. For
example, if tmnxDot1agCfmMepSlmTWInterval has the value 90, and
tmnxDot1agCfmMepSlmTWIntrvlUnits has the value 'centiseconds(2)', the
interval between SLM messages is 0.9 seconds.
The intervals supported are shown in the tmnxDot1agCfmMepSlmTWInterval
DESCRIPTION clause.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.9 |
tmnxDot1agCfmMepSlmOWTestTabletmnxDot1agCfmMepSlmOWTestTable consists of the MEP configuration for
issuing individual Synthetic Loss Measurement one-way tests. SEQUENCE OF TmnxDot1agCfmMepSlmOWTestEntry .1.3.6.1.4.1.6527.3.1.2.52.7.5 |
tmnxDot1agCfmMepSlmOWTestEntrytmnxDot1agCfmMepSlmOWTestEntry contains the configuration for
generating Synthetic Loss Measurement (SLM) Tests for a particular MEP.
A row exists for each row in the dot1agCfmMepTable, and is destroyed
automatically with the removal of a row in the dot1agCfmMepTable.
Results from a one-way SLM test are reported in
tmnxDot1agCfmMepSlmTestRsltTable with tmnxDot1agCfmMepSlmTestType set
to 'oneWayTest (1)'. TmnxDot1agCfmMepSlmOWTestEntry .1.3.6.1.4.1.6527.3.1.2.52.7.5.1 |
tmnxDot1agCfmMepSlmOWTestStatusThe value of tmnxDot1agCfmMepSlmOWTestStatus specifies the operational
state of the one-way Synthetic Loss Measurement (SLM) test.
To issue a one-way SLM test the user must issue an SNMP SET on this
object with a value 'enabled (1)'. To abort the one-way SLM test issue
an SNMP SET on this object with the value 'disabled (2)'.
A read on this object represents the current state of the one-way SLM
test:
enabled (1) - The test is actively running, and attempts at
modifying any one-way SLM object will be rejected
disabled (2) - The test is not running.
Once the test is complete this object will revert to the default value
'disabled (2)'.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.52.7.5.1.1 |
tmnxDot1agCfmMepSlmOWTestIdThe value of tmnxDot1agCfmMepSlmOWTestId indicates the test identifier
used to initiate the one-way Synthetic Loss Measurement (SLM) test.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.7.5.1.2 |
tmnxDot1agCfmMepSlmOWMacAddressThe value of tmnxDot1agCfmMepSlmOWMacAddress specifies the MAC address
used as a target for the one-way Synthetic Loss Measurement (SLM) Test.
This object MUST be set to a valid MAC Address for proper execution of
the one-way SLM test.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.7.5.1.3 |
tmnxDot1agCfmMepSlmOWPriorityThe value of tmnxDot1agCfmMepSlmOWPriority specifies the priority used
in the generated test frame for the one-way Synthetic Loss Measurement
(SLM) test.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.7.5.1.4 |
tmnxDot1agCfmMepSlmOWIntervalThe value of tmnxDot1agCfmMepSlmOWInterval specifies the delay, in
seconds, between Synthetic Loss Measurement (SLM) messages for the
one-way SLM test.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.7.5.1.5 |
tmnxDot1agCfmMepSlmOWDataSizeThe value of tmnxDot1agCfmMepSlmOWDataSize specifies the data size,
in bytes, contained in the padding TLV for the one-way Synthetic Loss
Measurement (SLM) test. A value of zero (0) specifies that no padding
TLV is inserted in the SLM packet. Any non-zero value will increase
the packet size by the specified data size plus 3 bytes for the TLV
header.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.7.5.1.6 |
tmnxDot1agCfmMepSlmOWSendCountThe value of tmnxDot1agCfmMepSlmOWSendCount specifies the number of
Synthetic Loss Measurement (SLM) packets to send consecutively during
the one-way SLM test.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.7.5.1.7 |
tmnxDot1agCfmMepSlmTestRsltTabletmnxDot1agCfmMepSlmTestRsltTable consists of the results of manually
triggered Synthetic Loss Measurement tests. SEQUENCE OF TmnxDot1agCfmMepSlmTestRsltEntry .1.3.6.1.4.1.6527.3.1.2.52.7.6 |
tmnxDot1agCfmMepSlmTestRsltEntrytmnxDot1agCfmMepSlmTestRsltEntry contains the results of a
manually triggered Synthetic Loss Measurement (SLM) test for a
particular MEP. Rows are auto-generated by the system based on the
issuing of a SLM test. TmnxDot1agCfmMepSlmTestRsltEntry .1.3.6.1.4.1.6527.3.1.2.52.7.6.1 |
tmnxDot1agCfmMepSlmTestTypeThe value of tmnxDot1agCfmMepSlmTestType specifies whether the
row for this Synthetic Loss Measurement (SLM) test refers to a two-way
SLM test. Enumeration .1.3.6.1.4.1.6527.3.1.2.52.7.6.1.1 |
tmnxDot1agCfmMepSlmRemoteMacAddrThe value of tmnxDot1agCfmMepSlmRemoteMacAddr specifies the source MAC
address of the remote node involved in the test. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.7.6.1.2 |
tmnxDot1agCfmMepSlmTestIdThe value of tmnxDot1agCfmMepSlmTestId indicates the test identifier
that was used to initiate the Synthetic Loss Measurement (SLM) test.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.7.6.1.3 |
tmnxDot1agCfmMepSlmRemoteMepIdThe value of tmnxDot1agCfmMepSlmRemoteMepId indicates the MEP
Identifier of the remote node involved in the test.ro Dot1agCfmMepId .1.3.6.1.4.1.6527.3.1.2.52.7.6.1.4 |
tmnxDot1agCfmMepSlmLastTxSeqFThe value of tmnxDot1agCfmMepSlmLastTxSeqF indicates the last
received sequence number on the local node, transmitted by the
remote node.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.7.6.1.5 |
tmnxDot1agCfmMepSlmPacketInThe value of tmnxDot1agCfmMepSlmPacketIn indicates the number of
packets received during the execution of the test.ro Counter32 UNITS "packets" .1.3.6.1.4.1.6527.3.1.2.52.7.6.1.6 |
tmnxDot1agCfmMepSlmPacketLossInThe value of tmnxDot1agCfmMepSlmPacketLossIn indicates the number of
packets transmitted from the remote node but not received on the local
node during the execution of the test.ro Integer32 UNITS "packets" .1.3.6.1.4.1.6527.3.1.2.52.7.6.1.7 |
tmnxDot1agCfmMepSlmPacketLossOutThe value of tmnxDot1agCfmMepSlmPacketLossOut indicates the number of
packets transmitted from the local node but not received on the remote
node during the execution of the test.ro Integer32 UNITS "packets" .1.3.6.1.4.1.6527.3.1.2.52.7.6.1.8 |
tmnxDot1agCfmMepSlmPacketUnackThe value of tmnxDot1agCfmMepSlmPacketUnack indicates the number of
unacknowledged lost packets during the execution of the test.ro Gauge32 UNITS "packets" .1.3.6.1.4.1.6527.3.1.2.52.7.6.1.9 |
tmnxDot1agCfmMepMcstLbmRsltTabletmnxDot1agCfmMepMcstLbmRsltTable consists of the results of manually
triggered ETH-CFM loopback tests where the value of
dot1agCfmMepTransmitLbmDestMacAddress was set to the multicast
MAC address for the MEP.
Only one result set per MEP is retained. SEQUENCE OF TmnxDot1agCfmMepMcstLbmRsltEntry .1.3.6.1.4.1.6527.3.1.2.52.7.7 |
tmnxDot1agCfmMepMcstLbmRsltEntrytmnxDot1agCfmMepMcstLbmRsltEntry contains an individual message
response to a manually triggered loopback test.
A row is auto-generated by the system upon receipt of a valid loopback
response that matches a multicast loopback test in progress. TmnxDot1agCfmMepMcstLbmRsltEntry .1.3.6.1.4.1.6527.3.1.2.52.7.7.1 |
tmnxDot1agCfmMepLbmRemoteMepMacThe value of tmnxDot1agCfmMepLbmRemoteMepMac specifies the MAC address
of the remote MEP responding to the multicast loopback message. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.7.7.1.1 |
tmnxDot1agCfmMepLbmSeqNumberThe value of tmnxDot1agCfmMepLbmSeqNumber specifies the sequence
number contained within the reply message. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.7.7.1.2 |
tmnxDot1agCfmMepLbmRxIndexThe value of tmnxDot1agCfmMepLbmRxIndex indicates the order in which
the reply was received for the corresponding remote MAC address. It
is locally assigned and can be used to detect out of order responses.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.7.7.1.3 |
tmnxDot1agCfmMepDbTabletmnxDot1agCfmMepDbTable is an augmented table for the standard
IEEE8021-CFM table dot1agCfmMepDbTable. SEQUENCE OF TmnxDot1agCfmMepDbEntry .1.3.6.1.4.1.6527.3.1.2.52.7.8 |
tmnxDot1agCfmMepDbEntrytmnxDot1agCfmMepDbEntry is an augmented conceptual row in the
dot1agCfmMepDbTable. Objects defined in this row extend the
functionality of the base row.
Creation and deletion of rows in this table is managed through the
base table. TmnxDot1agCfmMepDbEntry .1.3.6.1.4.1.6527.3.1.2.52.7.8.1 |
tmnxDot1agCfmMepDbGraceRxThe value of tmnxDot1agCfmMepDbGraceRx indicates whether the
remote peer is transmitting a grace period notification or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.7.8.1.1 |
tmnxDot1agCfmMip OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.52.8 |
tmnxDot1agCfmSapMipTableA row in the tmnxDot1agCfmSapMipTable indicates that the
specified SAP may have a MIP created on the endpoint. SEQUENCE OF TmnxDot1agCfmSapMipEntry .1.3.6.1.4.1.6527.3.1.2.52.8.1 |
tmnxDot1agCfmSapMipEntryThe MIP (SAP) entry TmnxDot1agCfmSapMipEntry .1.3.6.1.4.1.6527.3.1.2.52.8.1.1 |
tmnxDot1agCfmSapMipIfIndexThis object represents the Bridge Port or aggregated port
on which MEPs or MHFs might be configured. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.52.8.1.1.1 |
tmnxDot1agCfmSapMipVlanIdOrNoneVLAN ID to which the MIP is attached, or 0, if none. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.8.1.1.2 |
tmnxDot1agCfmSapMipRowStatusThe tmnxDot1agCfmSapMipRowStatus specifies the ability to enable MIP
creation under a SAP. Existing MIPs associated with the SAP may be
viewed via the tmnxDot1agCfmStackTablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.8.1.1.3 |
tmnxDot1agCfmSapMipSrcMacAddressThe value of tmnxDot1agCfmSapMipSrcMacAddress specifies the source
MAC address used by the MIP.
By default, the MAC address is the MAC address of the SAP.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.8.1.1.4 |
tmnxDot1agCfmSdpMipTableA row in the tmnxDot1agCfmSapMipTable indicates that the
specified SDP-Binding may have a MIP created on the endpoint. SEQUENCE OF TmnxDot1agCfmSdpMipEntry .1.3.6.1.4.1.6527.3.1.2.52.8.2 |
tmnxDot1agCfmSdpMipEntryThe MIP (SDP-Binding) entry TmnxDot1agCfmSdpMipEntry .1.3.6.1.4.1.6527.3.1.2.52.8.2.1 |
tmnxDot1agCfmSdpMipSvcIdThe value of tmnxDot1agCfmSdpMipSvcId specifies the
service on which the Sdp-Binding MIP is configured. TmnxServId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.52.8.2.1.1 |
tmnxDot1agCfmSdpMipSdpIdThe value of tmnxDot1agCfmSdpMipSdpId specifies the
Bridge Port or aggregated port on which MEPs or MHFs
might be configured. SdpId (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.52.8.2.1.2 |
tmnxDot1agCfmSdpMipVcIdThe value of tmnxDot1agCfmSdpMipVcId specifies, along with
tmnxDot1agCfmSdpMipSdpId, the SDP Binding for the bridge. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.52.8.2.1.3 |
tmnxDot1agCfmSdpMipRowStatusThe tmnxDot1agCfmSapMipRowStatus specifies the ability to enable MIP
creation under a SAP. Existing MIPs associated with the SAP may be
viewed via the tmnxDot1agCfmSdpBindStackTablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.8.2.1.4 |
tmnxDot1agCfmSdpMipSrcMacAddressThe value of tmnxDot1agCfmSdpMipSrcMacAddress specifies the source
MAC address used by the MIP.
By default, the MAC address is the MAC address of the chassis.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.52.8.2.1.5 |
tmnxDot1agCfmNotificationObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.52.9 |
tmnxDot1agCfmNotifySvcIdThe tmnxDot1agCfmNotifySvcId is used in notifications when a row
consisting of the service identifier may not exist when the trap
is issued.ro TmnxServId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.52.9.1 |
tmnxDot1agNotificationsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.52 |
tmnxDot1agNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.52.0 |
tmnxDot1agCfmMepLbmTestCompleteThe tmnxDot1agCfmMepLbmTestComplete notification indicates that
a loopback test has been issued and results are ready. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.52.0.1 |
tmnxDot1agCfmMepLtmTestCompleteThe tmnxDot1agCfmMepLtmTestComplete notification indicates that
a linktrace test has been issued and results are ready. The
dot1agCfmMepTransmitLtmSeqNumber indicates the Transaction
Identifier to use to retrieve the Link-trace results. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.52.0.2 |
tmnxDot1agCfmMepEthTestCompleteThe tmnxDot1agCfmMepEthTestComplete notification indicates that
an eth-test has been issued and results are ready. The
tmnxDot1agCfmMepCurrByteCount indicates the number of bytes contained in
the frame's Test TLV, and the tmnxDot1agCfmMepCurrFailedBits and
tmnxDot1agCfmMepCurrCrcFailures indicate the failure state of the
test. A value of Zero (0) for tmnxDot1agCfmMepCurrFailedBits and a
value of 'false (2)' for tmnxDot1agCfmMepCurrCrcFailures indicates
a successful test. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.52.0.3 |
tmnxDot1agCfmMepDMTestCompleteThe tmnxDot1agCfmMepDMTestComplete notification indicates that a
One-Way-Delay-Test (OWDT) frame, or a Two-Way-Delay-Test (TWDT) response
was received. For an OWDT frame, traps are raised only when a delay
threshold of three (3) seconds is exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.52.0.4 |
tmnxDot1agCfmMepAisStateChangedThe tmnxDot1agCfmMepAisStateChanged notification is generated when
a MEP enters or exits an AIS state. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.52.0.5 |
tmnxDot1agCfmMipEvaluationThe tmnxDot1agCfmMipEvaluation notification is generated when a
virtual MEP is created or deleted causing MIP reevaluation on the
service. On virtual MEP creation, any MIPs in the service will be
removed. On virtual MEP deletion, the MIPs are reevaluated. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.52.0.6 |
tmnxDot1agCfmMepSLMTestCompleteThe tmnxDot1agCfmMepSLMTestComplete notification is generated when
a two-way Synthetic Loss Measurement (SLM) test is completed. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.52.0.7 |