SUB10SYSTEMS-MIB
Sub10 Systems MIB
Main OID:
sub10Systems.1.3.6.1.4.1.39003
642
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
642 total| Object Name |
|---|
sub10SystemsSub10 Systems MIB MODULE-IDENTITY .1.3.6.1.4.1.39003 |
sub10Notifications OBJECT IDENTIFIER .1.3.6.1.4.1.39003.0 |
sub10UnitAlarmA measured object relating the Unit subsystem has been raised or cleared according to the configured thresholds. For alarm configuration see sub10UnitMgmtAlarmTable. NOTIFICATION-TYPE .1.3.6.1.4.1.39003.0.1 |
sub10EthernetAlarmA measured object relating the Ethernet subsystem has been raised or cleared according to the configured thresholds. For alarm configuration see sub10UnitMgmtAlarmTable. NOTIFICATION-TYPE .1.3.6.1.4.1.39003.0.2 |
sub10RadioAlarmA measured object relating the Radio subsystem has been raised or cleared according to the configured thresholds. For alarm configuration see sub10UnitMgmtAlarmTable. NOTIFICATION-TYPE .1.3.6.1.4.1.39003.0.3 |
sub10Unit OBJECT IDENTIFIER .1.3.6.1.4.1.39003.3 |
sub10UnitStatus OBJECT IDENTIFIER .1.3.6.1.4.1.39003.3.1 |
sub10UnitLocalStatus OBJECT IDENTIFIER .1.3.6.1.4.1.39003.3.1.1 |
sub10UnitLclTimeThe local system time as a display string in the format:- YYYY-MM-DD,HH:MM:SS e.g. 2014-5-26,13:30:15ro Sub10DateTime .1.3.6.1.4.1.39003.3.1.1.1 |
sub10UnitLclUnitTypeUniquely identifies the local unit product typero Sub10UnitType .1.3.6.1.4.1.39003.3.1.1.2 |
sub10UnitLclDescriptionThe description of the local unit. This is synonymous with MIB-II sysDescr.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.39003.3.1.1.3 |
sub10UnitLclHWSerialNumberThe hardware serial number of the Local Unit. This also identifies whether the unit is a V-band or E-band product. See sub10UnitLclMWUType.ro OCTET STRING .1.3.6.1.4.1.39003.3.1.1.4 |
sub10UnitLclTerminalNameThe administratively assigned name for the unit. This is synonymous with MIB-II sysName and can be administratively set via either sysName or sub10UnitMgmtTerminalName.ro OCTET STRING .1.3.6.1.4.1.39003.3.1.1.5 |
sub10UnitLclTerminalTypeUniquely identifies the local terminal type A or B.ro Sub10TerminalType .1.3.6.1.4.1.39003.3.1.1.6 |
sub10UnitLclLinkNameThe administratively assigned name for the radio link between the local and remote units. This generally identifies geographically the two ends or a radio link within a site or location. This is synonymous with MIB-II sysLocation and can be administratively set via either sysLocation or sub10UnitMgmtLinkName.ro OCTET STRING .1.3.6.1.4.1.39003.3.1.1.7 |
sub10UnitLclLinkIdThe administratively assigned identifier for the radio link between the local and remote units. The LinkId must be the same value on both local and remote units.ro OCTET STRING .1.3.6.1.4.1.39003.3.1.1.8 |
sub10UnitLclSiteNameThe administratively assigned physical location of the local unit.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.39003.3.1.1.9 |
sub10UnitLclFirmwareLoadedBankCurrently loaded bank. The firmware version running in this bank is defined by sub10UnitLclFirmwareVersion.ro Sub10FirmwareBank .1.3.6.1.4.1.39003.3.1.1.10 |
sub10UnitLclFirmwareVersionThe firmware version currently running on the local unit. This is by definition the firmware loaded into the bank number defined in sub10UnitLclFirmwareLoadedBank.ro OCTET STRING .1.3.6.1.4.1.39003.3.1.1.11 |
sub10UnitLclIpAddressThe IP address of the local ethernet interface.ro OCTET STRING .1.3.6.1.4.1.39003.3.1.1.12 |
sub10UnitLclMWUTemperatureThe modem temperature on the local unit in degrees celsius.ro Integer32(-100..100) .1.3.6.1.4.1.39003.3.1.1.13 |
sub10UnitLclNTPSyncStatusThe indication that the systems clock is synchronised with the NTP server.ro Sub10NTPSyncStatus .1.3.6.1.4.1.39003.3.1.1.14 |
sub10UnitLclAlarmStateTableThe table listing the each active alarm the local unit. An active alarm is where the alarm state is 'raised' at the specific severity level. The entries in the table correspond to the configured entries in sub10UnitMgmtAlarmTable. This table has a single entry per alarm where the index to the table is the same index as the associated Alarm configuration table sub10UnitMgmtAlarmTable. SEQUENCE OF Sub10UnitLclAlarmStateEntry .1.3.6.1.4.1.39003.3.1.1.15 |
sub10UnitLclAlarmStateEntryAn entry (row) in the sub10UnitLclAlarmStateTable. Sub10UnitLclAlarmStateEntry .1.3.6.1.4.1.39003.3.1.1.15.1 |
sub10UnitLclAlarmStateIndexThe sub10UnitLclAlarmStateTable index. The index represents the same index as used in sub10UnitMgmtAlarmTable. The entries in the table correspond to the configured entries in sub10UnitMgmtAlarmTable. Sub10AlarmIndex .1.3.6.1.4.1.39003.3.1.1.15.1.1 |
sub10UnitLclAlarmStateInternal object to indicate if this alarm is currently in the raised or cleared state.ro Sub10AlarmState .1.3.6.1.4.1.39003.3.1.1.15.1.2 |
sub10UnitLclAlarmStateTimeThe local date and time when the last Alarm State transition occurred. This object facilitates retrieving all instances of alarms that have been raised or have changed state since a given point in time. Implementations MUST include the offset from UTC, if available. Implementation in environments in which the UTC offset is not available is NOT RECOMMENDED.ro Sub10DateTime .1.3.6.1.4.1.39003.3.1.1.15.1.3 |
sub10UnitLclRadioDataRateThe maximum data rate of the Airside interface. This has the same value as sub10RadioLclDataRate.ro Sub10RadioDataRate .1.3.6.1.4.1.39003.3.1.1.16 |
sub10UnitLclMWUTypeThe local MWU typero Sub10MWUType .1.3.6.1.4.1.39003.3.1.1.17 |
sub10UnitLclFPGAVersionThe FPGA Version.ro OCTET STRING .1.3.6.1.4.1.39003.3.1.1.18 |
sub10UnitRemoteStatus OBJECT IDENTIFIER .1.3.6.1.4.1.39003.3.1.2 |
sub10UnitRmtUnitTypeUniquely identifies the remote unit product typero Sub10UnitType .1.3.6.1.4.1.39003.3.1.2.1 |
sub10UnitRmtTimeThe remote unit local system time as a display string in the format:- YYYY-MM-DD,HH:MM:SS e.g. 2014-5-26,13:30:15ro Sub10DateTime .1.3.6.1.4.1.39003.3.1.2.2 |
sub10UnitRmtTerminalNameThe administratively assigned name for the remote unit. This is synonymous with MIB-II sysName.ro OCTET STRING .1.3.6.1.4.1.39003.3.1.2.3 |
sub10UnitRmtTerminalTypeUniquely identifies the remote terminal type A or B.ro Sub10TerminalType .1.3.6.1.4.1.39003.3.1.2.4 |
sub10UnitRmtLinkNameThe administratively assigned name on the remote unit for the radio link between the local and remote units. This generally identifies geographically the two ends or a radio link within a site or location.ro OCTET STRING .1.3.6.1.4.1.39003.3.1.2.5 |
sub10UnitRmtLinkIdThe administratively assigned identifier on the remote unit for the radio link between the local and remote units. The LinkId must be the same value on both local and remote units.ro OCTET STRING .1.3.6.1.4.1.39003.3.1.2.6 |
sub10UnitRmtHWSerialNumberThe hardware serial number of the Remote Unit. This also identifies whether the unit is a V-band or E-band product.ro OCTET STRING .1.3.6.1.4.1.39003.3.1.2.7 |
sub10UnitRmtFirmwareVersionThe firmware version currently running on the remote unit. This is by definition the firmware loaded into the bank currently used for boot. See sub10UnitMgmtFirmware.ro OCTET STRING .1.3.6.1.4.1.39003.3.1.2.8 |
sub10UnitRmtIpAddressThe IP address of the remote ethernet interface.ro OCTET STRING .1.3.6.1.4.1.39003.3.1.2.9 |
sub10UnitRmtMWUTemperatureThe modem temperature on the local unit in degrees celsius.ro Integer32(-100..100) .1.3.6.1.4.1.39003.3.1.2.10 |
sub10UnitMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.39003.3.2 |
sub10UnitMgmtSystem OBJECT IDENTIFIER .1.3.6.1.4.1.39003.3.2.1 |
sub10UnitMgmtTerminalNameThe administratively assigned name for the unit. This is synonymous with MIB-II sysName and sub10UnitLocalStatus sub10UnitLclTerminalName.rw OCTET STRING .1.3.6.1.4.1.39003.3.2.1.1 |
sub10UnitMgmtLinkNameThe administratively assigned name for the radio link between the local and remote units. This generally identifies geographically the two ends or a radio link within a site or location. This is synonymous with sub10UnitLocalStatus sub10UnitLclLinkNamerw OCTET STRING .1.3.6.1.4.1.39003.3.2.1.2 |
sub10UnitMgmtLinkIdThe administratively assigned identifier for the radio link between the local and remote units. The LinkId must be the same value on both local and remote units. This is synonymous with sub10UnitLocalStatus sub10UnitLclLinkId. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).rw OCTET STRING .1.3.6.1.4.1.39003.3.2.1.3 |
sub10UnitMgmtSiteNameThe administratively assigned physical location of the unit. This is synonymous with MIB-II sysLocation and sub10UnitLocalStatus sub10UnitLclSiteName.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.39003.3.2.1.4 |
sub10UnitMgmtContactNameThe administratively assigned contact for support of the unit. This is synonymous with MIB-II sysContact and sub10UnitLocalStatus sub10UnitLclContactName.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.39003.3.2.1.5 |
sub10UnitMgmtIp OBJECT IDENTIFIER .1.3.6.1.4.1.39003.3.2.2 |
sub10UnitMgmtIpModeIP Address configuration is either manually set as ipv4 or ipv6 type addreessing or alternatively can be dynamically assigned automatically using the Dynamic Host Control Protocol (DHCP). IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).rw Enumeration .1.3.6.1.4.1.39003.3.2.2.1 |
sub10UnitMgmtIpAddressThe administratively assigned IP Address for the management channel. This is reflected in the MIB-II ipAddrTable. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).rw OCTET STRING .1.3.6.1.4.1.39003.3.2.2.2 |
sub10UnitMgmtIpSubnetMaskThe administratively assigned sub-net mask for the management channel. This is reflected in the MIB-II ipAddrTable. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).rw OCTET STRING .1.3.6.1.4.1.39003.3.2.2.3 |
sub10UnitMgmtIpDefGatewayThe administratively assigned default gateway for the management channel. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).rw OCTET STRING .1.3.6.1.4.1.39003.3.2.2.4 |
sub10UnitMgmtIpDHCPDynamic Host Control Protocol (DHCP) is enabled or disabled. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).rw Sub10State .1.3.6.1.4.1.39003.3.2.2.5 |
sub10UnitMgmtVlan OBJECT IDENTIFIER .1.3.6.1.4.1.39003.3.2.3 |
sub10UnitMgmtVlanStateEnable VLAN for Management traffic. .rw Sub10State .1.3.6.1.4.1.39003.3.2.3.1 |
sub10UnitMgmtVlanIdThe VLAN Id used to carry management traffic. Only valid when the object is set to a non-zero value. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).rw Sub10VlanId .1.3.6.1.4.1.39003.3.2.3.2 |
sub10UnitMgmtVlanPriorityThe VLAN priority inserted into the ethernet frame for all management traffic. Only valid when the object sub10UnitMgmtVlanId is set to non zero. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).rw Unsigned32 .1.3.6.1.4.1.39003.3.2.3.3 |
sub10UnitMgmtVlanDSCPThe Differentiated Services Code Point priority inserted into the IP header of all management traffic. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).rw Unsigned32 .1.3.6.1.4.1.39003.3.2.3.4 |
sub10UnitMgmtVlanDEISet the Drop Eligible Indicator inserted into the ethernet frame for all management traffic. Only valid when the object sub10UnitMgmtVlanId is set to non zero. The DEI bit is set into the tag control information (TCI) field of each management frame. The DEI is a 1 bit field immediately following the PCP bits (3 bit field) IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).rw Sub10State .1.3.6.1.4.1.39003.3.2.3.5 |
sub10UnitMgmtUsers OBJECT IDENTIFIER .1.3.6.1.4.1.39003.3.2.4 |
sub10UnitMgmtUsersNumberThe number of valid sub10UnitMgmtUsersTable table entries present on this system.ro Unsigned32 .1.3.6.1.4.1.39003.3.2.4.1 |
sub10UnitMgmtUserTableThe table listing the users configured on the unit. The number of user entries is sub10UnitMgmtUsersNumber. This table is indexed by user name (sub10UnitMgmtUserName). Multiple entries with the same sub10UnitMgmtUserName are not possible. NB. As part of SNMPv3 support this table will be superceded by 'usmUserTable'. SEQUENCE OF Sub10UnitMgmtUserEntry .1.3.6.1.4.1.39003.3.2.4.2 |
sub10UnitMgmtUserEntryAn entry (row) in the sub10UnitMgmtUserTable. If the rowStatus is set to notInService(2) then the entry is not valid and no columnar objects are returned. Usage is as follows: active(1) - Entry is created and in use. Any attempt to set this value will first check for consistent objects. If objects are found to be inconsistent then the entry will not be created and an error will be returned. notInService(2) - Entry is not created and not in use. Any attempt to set this value will result in the the entry remaining created but not accessible and not used. notReady(3) - Entry is created but has inconsistent objects, these must be set to correct values before the object can be set to active(1). createAndGo(4) - Set this to create a new entry and attempt to make the entry active(1). If the entry has inconsistent objects then this will set the entry to notReady(3) and an error will be returned. createAndWait(5)- Set this to create a new entry. This will set rowStatus = notReady(3). Related objects can then be set to consistent values before row_status can be set to active(1). destroy(6) - Set this to delete an entry. Sub10UnitMgmtUserEntry .1.3.6.1.4.1.39003.3.2.4.2.1 |
sub10UnitMgmtUserIndexThe sub10UnitMgmtUserTable index. Unsigned32 .1.3.6.1.4.1.39003.3.2.4.2.1.1 |
sub10UnitMgmtUserRowStatusThe row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or notInService(2) which indicates that the row is operationally in use or not. The default value is notInService(2) meaning the entry is not used by default. To make the entry valid this object must be set to enabled(1), createAndGo(4) or createAndWait(5). To delete the row set this to destroy(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.39003.3.2.4.2.1.2 |
sub10UnitMgmtUserNameThe unique user name provided by the system administrator.rw OCTET STRING .1.3.6.1.4.1.39003.3.2.4.2.1.3 |
sub10UnitMgmtUserGroupThe user group provided by the system administrator. This restricts a user to certain key functions on the web GUI.rw Sub10UserGroup .1.3.6.1.4.1.39003.3.2.4.2.1.4 |
sub10UnitMgmtUserPasswordThe unique user password provided by the system administrator. This object can be set but is not visible when read.rw OCTET STRING .1.3.6.1.4.1.39003.3.2.4.2.1.5 |
sub10UnitMgmtUserPasswordVerifyThe unique user password provided by the system administrator use to verify the setting of sub10UnitMgmtUserPassword. This object can be set but is not visible when read.rw OCTET STRING .1.3.6.1.4.1.39003.3.2.4.2.1.6 |
sub10UnitMgmtTime OBJECT IDENTIFIER .1.3.6.1.4.1.39003.3.2.5 |
sub10UnitMgmtTimeLocalThe administratively assigned system time defined as a display string in the format:- YYYY-MM-DD HH:MM:SS e.g. 2014-05-26 13:30:15rw Sub10DateTime .1.3.6.1.4.1.39003.3.2.5.1 |
sub10UnitMgmtTimeNTPEnabledThe administratively assigned state to enable or disable NTP. system cloack assignment automatically using the Network Time Protocol (NTP).rw Sub10State .1.3.6.1.4.1.39003.3.2.5.2 |
sub10UnitMgmtTimeNTPServer1The administratively assigned primary NTP Server name.rw OCTET STRING .1.3.6.1.4.1.39003.3.2.5.3 |
sub10UnitMgmtTimeNTPServer2The administratively assigned secondary NTP Server name to be used when the primary server is not responding.rw OCTET STRING .1.3.6.1.4.1.39003.3.2.5.4 |
sub10UnitMgmtTimeNTPPortThe administratively assigned NTP Port number name to be used when contacting the NTP server.rw Unsigned32 .1.3.6.1.4.1.39003.3.2.5.5 |
sub10UnitMgmtTimeNTPSyncStatusThe indication that the systems clock is synchronised with the NTP server.ro Sub10NTPSyncStatus .1.3.6.1.4.1.39003.3.2.5.6 |
sub10UnitMgmtDateTimeThe administratively assigned system defined as a standard date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.39003.3.2.5.7 |
sub10UnitMgmtAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.39003.3.2.6 |
sub10UnitMgmtAlarmTableThe sub10UnitMgmtAlarmTable defines the alarm configuration. The first 'N' rows of the table is reserved for fixed alarms defined by the manufacturer. Fixed alarms cannot be deleted or their names changed, other attributes of a fixed alarm may be modified. The remainder of rows are available for user defined alarms which can be created and deleted. The index value 'N' is defined by 'sub10UnitMgmtAlarmsUserDefStart'. Any attempt to create or delete a row in the table with an index less than value of 'sub10UnitMgmtAlarmsUserDefStart' will be rejected. This table is indexed by alarm index a number ranging from 1 to the maximum number of entries in the alarm table. User defined alarm name and and alarm severity are configurable allowing multiple entries for the same alarm to be raised at different severity levels according to different threshold levels. A user defined alarm can be created with the same name as a fixed alarm if required. For example the fixed alarm 'Rx Power Low' monitors the radio receive power and raises an alarm if the value is less than a certain threshold. A user defined alarm may be created with the same name but a less stringent threshold and a lower seveirty level. This allows same alarms to be raised at increasing severity as the condition causing the alarm worsens. This table allows configuration of threshold passing behavior, threshold values for both raising and clearing the alarms and the perceived severity. The alarm forwarding mechanisms can be defined for example SNMP trap, syslog and SMTP. No validation of thresholds across different entries of the table therefore the administrator must ensure that thresholds are correctly set accordingly for the severity of each alarm. This is particularly important where a single alarm name is configured to be raised at different severity levels. SEQUENCE OF Sub10UnitMgmtAlarmEntry .1.3.6.1.4.1.39003.3.2.6.1 |
sub10UnitMgmtAlarmEntryAn entry (row) in the sub10UnitMgmtAlarmTable. If the rowStatus is set to notInService(2) then the entry is not valid and no columnar objects are returned. Sub10UnitMgmtAlarmEntry .1.3.6.1.4.1.39003.3.2.6.1.1 |
sub10UnitMgmtAlarmIndexThe sub10UnitMgmtAlarmTable index. Sub10AlarmIndex .1.3.6.1.4.1.39003.3.2.6.1.1.1 |
sub10UnitMgmtAlarmRowStatusThe row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or notInService(2) which indicates that the row is operationally in use or not. The default value is notInService(2) meaning the entry is not used by default. To make the entry valid this object must be set to enabled(1), createAndGo(4) or createAndWait(5). To delete the row set this to destroy(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.39003.3.2.6.1.1.2 |
sub10UnitMgmtAlarmNameThe alarm name. This is a short descriptive name for the alarm. Alarm names can be duplicated across entries in order to define the same alarm to be raised and cleared according to different thresholds and different severity levels. If the user defines mutiple alarms with the same name it important to correctly configure severity and thresholds to avoid multiple alarms being generated for the same condition. Fixed alarm names cannot be modified. Fixed alarms are populated automatically in rows 1 to ('sub10UnitMgmtAlarmsUserDefStart'-1)rw Sub10AlarmName .1.3.6.1.4.1.39003.3.2.6.1.1.3 |
sub10UnitMgmtAlarmSeverityThe alarm severity. This is added to each alarm as a parameter.rw Sub10AlarmSeverity .1.3.6.1.4.1.39003.3.2.6.1.1.4 |
sub10UnitMgmtAlarmMeasObjectThe measured object. This is the object name of the object in the MIB with which the alarm is associated and which the configured thresholds are compared with when deriving the state of the alarm. It is not neccessary for all alarm measurement values to be identified in the MIB since a single alarm may be dependant on checks against entities or objects which are not present in the MIB and therefore do not have an associated OID. In general where an alarm and its thresholds relate to the monitoring of the value of a single MIB object then the OID of that object will be defined here otherwise the value is set to empty string.rw Sub10MeasuredObject .1.3.6.1.4.1.39003.3.2.6.1.1.5 |
sub10UnitMgmtAlarmMonitorIntvlThe interval in seconds when the measured object is to be read and compared with the raise and clear thresholds. An alarm cannot be raised or cleared quicker than the configured interval. Please also see related sub10UnitMgmtAlarmRaiseIntvls and sub10UnitMgmtAlarmClearIntvls objects which also affect when alarms are raised and cleared. This object should be set appropriately for the measured object to be monitored (see sub10UnitMgmtAlarmRaiseMeasObject) and the resulting alarm to be raised and cleared (see sub10UnitMgmtAlarmName). This also affects the forwarding of alarms for example as SNMP notifications. Higher severity alarms may have a shorter interval than those at a lower severity. The correct setting of sub10UnitMgmtAlarmMonitorIntvl and related objects sub10UnitMgmtAlarmRaiseIntvls and sub10UnitMgmtAlarmClearIntvls are important to avoid potential network loading caused by alarm storms.rw Unsigned32 .1.3.6.1.4.1.39003.3.2.6.1.1.6 |
sub10UnitMgmtAlarmRaiseOperType of operation which determines when an alarm is to be raised. Definition of each type is as follows: lt - Measured objects value is less than raise threshold gt - Measured objects value is greater than raise threshold le - Measured objects value is less than or equal to raise threshold ge - Measured objects value is greater than or equal to raise threshold eq - Measured objects value is equal to raise threshold neq - Measured objects value is not equal to raise threshold The alarm operation defines how to apply the configured thresholds when raising the alarm. This defines whether the alarm is raised when the measured object value crosses the threshold from low to high or from high to low or if the measured value hits a certain value or not. Example: Alarm Name Alarm Threshold Raise Operation High Temperature 70 gt Low Temperature -30 le High Temperature Alarm is raised when the measured temperature is above 70 and Low Temperature raised when the measured temperature is lower than or equal to -30.rw Sub10AlarmOperation .1.3.6.1.4.1.39003.3.2.6.1.1.7 |
sub10UnitMgmtAlarmRaiseThreshThe threshold value which the measured object's value crosses causes the alarm to be raised. The behaviour of a measured value and alarm threshold comparison is defined by the object sub10UnitMgmtAlarmThreshType.rw OCTET STRING .1.3.6.1.4.1.39003.3.2.6.1.1.8 |
sub10UnitMgmtAlarmClearOperType of operation which determines when an alarm is to be cleared. Definition of each type is as follows: lt - Measured objects value is less than clear threshold gt - Measured objects value is greater than clear threshold le - Measured objects value is less than or equal to clear threshold ge - Measured objects value is greater than or equal to clear threshold eq - Measured objects value is equal to clear threshold neq - Measured objects value is not equal to clear threshold The alarm operation defines how to apply the configured thresholds when clearing the alarm. This defines whether the alarm is cleared when the measured object value crosses the threshold from low to high or from high to low or if the measured value hits a certain value or not. Example: Alarm Name Alarm Threshold Clear Operation High Temperature 60 le Low Temperature -30 gt Low Temperature Alarm is cleared when the measured temperature is lower or equal to 60 and Low Temperature cleared when the measured temperature is greater than -30.rw Sub10AlarmOperation .1.3.6.1.4.1.39003.3.2.6.1.1.9 |
sub10UnitMgmtAlarmClearThreshThe threshold value which the measured object's value crosses causes the alarm to be cleared. The behaviour of a measured value and alarm threshold comparison is defined by the object sub10UnitMgmtAlarmThreshType. The sub10UnitMgmtAlarmClearThresh value may be different to the sub10UnitMgmtAlarmRaiseThresh allowing some hysteresis bewteen raising and clearing of alarms thus avoiding an alarm being continually raised and cleared if the measured value is changing frequently around the threshold. If different raise and clear thresholds are not required then the sub10UnitMgmtAlarmClearThresh and sub10UnitMgmtAlarmRaiseThresh should be set to the same value.rw OCTET STRING .1.3.6.1.4.1.39003.3.2.6.1.1.10 |
sub10UnitMgmtAlarmRaiseIntvlsThe number of continuous monitoring intervals (see sub10UnitMgmtAlarmMonitorIntvl) where the measured object has crossed the raise threshold before the alarm state is set to raised. This is intended to reduce the number of alarm state transitions when the measured object value is rapidly changing close to the configured raise threshold.rw Unsigned32 .1.3.6.1.4.1.39003.3.2.6.1.1.11 |
sub10UnitMgmtAlarmClearIntvlsThe number of continuous monitoring intervals (see sub10UnitMgmtAlarmMonitorIntvl) where the measured object has crossed the clear threshold before the alarm state is set to cleared. This is intended to reduce the number of alarm state transitions when the measured object value is rapidly changing close to the configured clear threshold.rw Unsigned32 .1.3.6.1.4.1.39003.3.2.6.1.1.12 |
sub10UnitMgmtAlarmTypeThe type of the alarm and defines the type of notification (trap) used to inform management entities.rw Sub10AlarmType .1.3.6.1.4.1.39003.3.2.6.1.1.13 |
sub10UnitMgmtAlarmSmtpAddressThe smtp mail address. If set the alarm is suitable formatted and sent to the given mail address.rw OCTET STRING .1.3.6.1.4.1.39003.3.2.6.1.1.14 |
sub10UnitMgmtAlarmToSyslogIf set to 'enabled' the alarm is suitably formatted and sent to syslog.rw Sub10State .1.3.6.1.4.1.39003.3.2.6.1.1.15 |
sub10UnitMgmtAlarmEnabledIf set to 'enabled' the alarm is enabled.rw Sub10State .1.3.6.1.4.1.39003.3.2.6.1.1.16 |
sub10UnitMgmtAlarmMeasObjectValThe value of sub10UnitMgmtAlarmMeasObject formatted as a displayString which when measured by the alarm subsystem caused an alarm to be either raised or cleared. This is therefore the value of the object which was compared with and found to have crossed the configured threshold causing the alarm to change state. The value is not the current value of the measured object it is the observed value which caused the change in alarm state.ro DisplayString .1.3.6.1.4.1.39003.3.2.6.1.1.17 |
sub10UnitMgmtAlarmToSNMPIf set to 'enabled' the alarm is forwarded as an SNMP notification / trap.rw Sub10State .1.3.6.1.4.1.39003.3.2.6.1.1.18 |
sub10UnitMgmtAlarmMeasObjIndexThe measured object's index which is a value from 1 and is the instance of the measured object to be monitored. For scalar objects this value is 0 and for non-scalar (or column) objects this value must be 0 or greater and must match the index value defined for the object where the object is defined as a column in a table and the table has an index defined in a certain range.rw Unsigned32 .1.3.6.1.4.1.39003.3.2.6.1.1.19 |
sub10UnitMgmtAlarmsUserDefStartThis defines the row index from which point rows in the sub10UnitMgmtAlarmTable can be created and deleted and therefore where user defined alarms start. Any attempt to create or delete a row in the sub10UnitMgmtAlarmTable with an index below this value will fail.ro Sub10AlarmIndex .1.3.6.1.4.1.39003.3.2.6.2 |
sub10UnitMgmtSnmp OBJECT IDENTIFIER .1.3.6.1.4.1.39003.3.2.7 |
sub10UnitMgmtSnmpAgentIf set to 'enabled' the agent will respond to valid v1/2c SNMP requests for GET/SET/GET-NEXT of supported MIB objects. If this object and the object sub10UnitMgmtSnmpv3 are both set to disabled then the unit will no longer respond to SNMP requests. If this object is set to enabled and sub10UnitMgmtSnmpv3 is set to enabled then the agent will respond to both both v1/2c and v3 SNMP requests. !! IMPORTANT !! If this object and sub10UnitMgmtSnmpv3 is set to disabled then the Agent will no longer respond therefore it will not be possible to re-enable the agent using SNMP. The agent can be re-enabled using the web GUI only. If this object is disabled then traps will not be forwarded by the unit.rw Sub10State .1.3.6.1.4.1.39003.3.2.7.1 |
sub10UnitMgmtSnmpTrapsIf set to 'enabled' the agent will forward traps to all configured trap destinations. If disabled traps are discarded. Traps are not sent if sub10UnitMgmtSnmpAgent is 'disabled(2)' regardless of the setting of this object.rw Sub10State .1.3.6.1.4.1.39003.3.2.7.2 |
sub10UnitMgmtSnmpv320MibIf set to 'enabled' the agent will support the Sub10 Systems v320 legacy MIB (LIBERATOR-MIB) objects and traps.rw Sub10State .1.3.6.1.4.1.39003.3.2.7.3 |
sub10UnitMgmtSnmpv3If set to 'enabled' the agent will support SNMPv3 PDUs and the SNMPv3 MIB configuration. This can be set to enabled or disabled independently of the object sub10UnitMgmtSnmpAgent which enables or disables the v1/2c agent. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).rw Sub10State .1.3.6.1.4.1.39003.3.2.7.4 |
sub10UnitMgmtSnmpTrpDstTableThe table listing the each trap destination the local unit. Each trap destination has an IpAddress and a trap community string SEQUENCE OF Sub10UnitMgmtSnmpTrpDstEntry .1.3.6.1.4.1.39003.3.2.7.5 |
sub10UnitMgmtSnmpTrpDstEntryAn entry (row) in the sub10UnitMgmtSnmpTrpDstTable. If the rowStatus is set to notInService(2) then the entry is not valid and no columnar objects are returned. Sub10UnitMgmtSnmpTrpDstEntry .1.3.6.1.4.1.39003.3.2.7.5.1 |
sub10UnitMgmtSnmpTrpDstIndexThe sub10UnitMgmtSnmpTrpDstTable index. If the rowStatus is not set to enabled(1) then the entry is not valid and no columnar objects are returned except for the rowStatus object itself. Unsigned32 .1.3.6.1.4.1.39003.3.2.7.5.1.1 |
sub10UnitMgmtSnmpTrpDstRowStatusThe row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or notInService(2) which indicates that the row is operationally in use or not. The default value is notInService(2) meaning the entry is not used by default. To make the entry valid this object must be set to enabled(1), createAndGo(4) or createAndWait(5). To delete the row set this to destroy(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.39003.3.2.7.5.1.2 |
sub10UnitMgmtSnmpTrpDstIpAddrThe administratively assigned SNMP Trap Destination IP.rw OCTET STRING .1.3.6.1.4.1.39003.3.2.7.5.1.3 |
sub10UnitMgmtSnmpTrpDstCommunityThe trap community name sent with each trap to this trap destination. The trap community allows for some security in the target management terminalrw OCTET STRING .1.3.6.1.4.1.39003.3.2.7.5.1.4 |
sub10UnitMgmtSnmpEngineIdFormatThe format of this SNMP v3 agent's engine id. The engine id is administratively defined and is between 5 and 32 characters long and can be based on a number of formats defined here.rw Enumeration .1.3.6.1.4.1.39003.3.2.7.6 |
sub10UnitMgmtSnmpEngineIdTextWhen sub10UnitMgmtSnmpEngineIdFormat='textString(4)' this object contains the administratively defined string used to build the SNMP v3 engine id in sub10UnitMgmtSnmpEngineId.rw OCTET STRING .1.3.6.1.4.1.39003.3.2.7.7 |
sub10UnitMgmtSnmpEngineIdThe administratively assigned SNMP v3 engine id. The construction of the engine id is dependant on the setting of sub10UnitMgmtSnmpEngineIdFormat and must be unique to the unit.ro OCTET STRING .1.3.6.1.4.1.39003.3.2.7.8 |
sub10UnitMgmtSnmpOperAuthProtoThe authentication protocol currently assigned to users of group type operation.rw Sub10Snmpv3AuthProtocol .1.3.6.1.4.1.39003.3.2.7.9 |
sub10UnitMgmtSnmpOperPrivProtoThe privacy protocol currently assigned to users of group type operation.rw Sub10Snmpv3PrivProtocol .1.3.6.1.4.1.39003.3.2.7.10 |
sub10UnitMgmtSnmpAdminAuthProtoThe authentication protocol currently assigned to users of group type administration.rw Sub10Snmpv3AuthProtocol .1.3.6.1.4.1.39003.3.2.7.11 |
sub10UnitMgmtSnmpAdminPrivProtoThe privacy protocol currently assigned to users of group type administration.rw Sub10Snmpv3PrivProtocol .1.3.6.1.4.1.39003.3.2.7.12 |
sub10UnitMgmtSnmpMaintAuthProtoThe authentication protocol currently assigned to users of group type maintenance.rw Sub10Snmpv3AuthProtocol .1.3.6.1.4.1.39003.3.2.7.13 |
sub10UnitMgmtSnmpMaintPrivProtoThe privacy protocol currently assigned to users of group type maintenance.rw Sub10Snmpv3PrivProtocol .1.3.6.1.4.1.39003.3.2.7.14 |
sub10UnitMgmtSnmpUserTableThe table of SNMPv3 User configuration. SEQUENCE OF Sub10UnitMgmtSnmpUserEntry .1.3.6.1.4.1.39003.3.2.7.15 |
sub10UnitMgmtSnmpUserEntryAn entry (row) in the sub10UnitMgmtSnmpUserTable. If the rowStatus is set to notInService(2) then the entry is not valid and no columnar objects are returned. Sub10UnitMgmtSnmpUserEntry .1.3.6.1.4.1.39003.3.2.7.15.1 |
sub10UnitMgmtSnmpUserIndexThe sub10UnitMgmtSnmpUserTable index. If the rowStatus is not set to enabled(1) then the entry is not valid and no columnar objects are returned except for the rowStatus object itself. Unsigned32 .1.3.6.1.4.1.39003.3.2.7.15.1.1 |
sub10UnitMgmtSnmpUserRowStatusThe row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or notInService(2) which indicates that the row is operationally in use or not. The default value is notInService(2) meaning the entry is not used by default. To make the entry valid this object must be set to enabled(1), createAndGo(4) or createAndWait(5). To delete the row set this to destroy(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.39003.3.2.7.15.1.2 |
sub10UnitMgmtSnmpUserNameThe administratively assigned SNMPv3 User name.rw OCTET STRING .1.3.6.1.4.1.39003.3.2.7.15.1.3 |
sub10UnitMgmtSnmpUserGroupThe user group type. Authentication and Privacy policies are assigned to a user group and not individual users.rw Sub10UserGroup .1.3.6.1.4.1.39003.3.2.7.15.1.4 |
sub10UnitMgmtSnmpUserAuthPwdThe unique SNMPv3 authentication protocol password provided by the system administrator. This object can be set but is not visible when read.rw OCTET STRING .1.3.6.1.4.1.39003.3.2.7.15.1.5 |
sub10UnitMgmtSnmpUserAuthPwdChkThe unique SNMPv3 authentication protocol password provided by the system administrator used to verify the setting of sub10UnitMgmtSnmpUserAuthPassword. This object can be set but is not visible when read.rw OCTET STRING .1.3.6.1.4.1.39003.3.2.7.15.1.6 |
sub10UnitMgmtSnmpUserPrivPwdThe unique SNMPv3 privacy protocol password provided by the system administrator. This object can be set but is not visible when read.rw OCTET STRING .1.3.6.1.4.1.39003.3.2.7.15.1.7 |
sub10UnitMgmtSnmpUserPrivPwdChkThe unique SNMPv3 privacy protocol password provided by the system administrator used to verify the setting of sub10UnitMgmtSnmpUserPrivPassword. This object can be set but is not visible when read.rw OCTET STRING .1.3.6.1.4.1.39003.3.2.7.15.1.8 |
sub10UnitMgmtSnmpAccessTableThe table of SNMPv3 Access configuration. SEQUENCE OF Sub10UnitMgmtSnmpAccessEntry .1.3.6.1.4.1.39003.3.2.7.16 |
sub10UnitMgmtSnmpAccessEntryAn entry (row) in the sub10UnitMgmtSnmpAccessTable. If the rowStatus is set to notInService(2) then the entry is not valid and no columnar objects are returned. Sub10UnitMgmtSnmpAccessEntry .1.3.6.1.4.1.39003.3.2.7.16.1 |
sub10UnitMgmtSnmpAccessIndexThe sub10UnitMgmtSnmpAccessTable index. If the rowStatus is not set to enabled(1) then the entry is not valid and no columnar objects are returned except for the rowStatus object itself. Unsigned32 .1.3.6.1.4.1.39003.3.2.7.16.1.1 |
sub10UnitMgmtSnmpAccessRowStatusThe row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or notInService(2) which indicates that the row is operationally in use or not. The default value is notInService(2) meaning the entry is not used by default. To make the entry valid this object must be set to enabled(1), createAndGo(4) or createAndWait(5). To delete the row set this to destroy(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.39003.3.2.7.16.1.2 |
sub10UnitMgmtSnmpAccessNameThe administratively assigned SNMPv3 access name. This is used as an alias for the access address for purposes of identification. The name is not used in the SNMP protocol.rw OCTET STRING .1.3.6.1.4.1.39003.3.2.7.16.1.3 |
sub10UnitMgmtSnmpAccessIpAddrThe administratively assigned SNMP access IP address. Only SNMP requests from this address will be serviced by the SNMP agent.rw OCTET STRING .1.3.6.1.4.1.39003.3.2.7.16.1.4 |
sub10UnitMgmtSnmpTargetTableThe table of SNMPv3 Target configuration. This table defines the addresses of target SNMPv3 managers to send Notifications. SEQUENCE OF Sub10UnitMgmtSnmpTargetEntry .1.3.6.1.4.1.39003.3.2.7.17 |
sub10UnitMgmtSnmpTargetEntryAn entry (row) in the sub10UnitMgmtSnmpTargetTable. If the rowStatus is set to notInService(2) then the entry is not valid and no columnar objects are returned. Sub10UnitMgmtSnmpTargetEntry .1.3.6.1.4.1.39003.3.2.7.17.1 |
sub10UnitMgmtSnmpTargetIndexThe sub10UnitMgmtSnmpTargetTable index. If the rowStatus is not set to enabled(1) then the entry is not valid and no columnar objects are returned except for the rowStatus object itself. Unsigned32 .1.3.6.1.4.1.39003.3.2.7.17.1.1 |
sub10UnitMgmtSnmpTargetRowStatusThe row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or notInService(2) which indicates that the row is operationally in use or not. The default value is notInService(2) meaning the entry is not used by default. To make the entry valid this object must be set to enabled(1), createAndGo(4) or createAndWait(5). To delete the row set this to destroy(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.39003.3.2.7.17.1.2 |
sub10UnitMgmtSnmpTargetNameThe administratively assigned SNMPv3 target name.rw OCTET STRING .1.3.6.1.4.1.39003.3.2.7.17.1.3 |
sub10UnitMgmtSnmpTargetIpAddrThe administratively assigned SNMP target IP address. When enabled SNMPv3 Notifications are sent to this address.rw OCTET STRING .1.3.6.1.4.1.39003.3.2.7.17.1.4 |
sub10UnitMgmtSnmpTargetUserNameThe administratively assigned SNMPv3 target user name. The security model configured for this user is used when sending notifications to the target address.rw OCTET STRING .1.3.6.1.4.1.39003.3.2.7.17.1.5 |
sub10UnitMgmtSmtp OBJECT IDENTIFIER .1.3.6.1.4.1.39003.3.2.8 |
sub10UnitMgmtFirmware OBJECT IDENTIFIER .1.3.6.1.4.1.39003.3.2.9 |
sub10UnitMgmtFirmwareSelectBankCurrently selected bank which unit uses to boot.rw Sub10FirmwareBank .1.3.6.1.4.1.39003.3.2.9.1 |
sub10UnitMgmtFirmwareLoadedBankCurrently loaded bank. The firmware version number running in this bank is defined by sub10UnitMgmtFirmwareVersion.ro Sub10FirmwareBank .1.3.6.1.4.1.39003.3.2.9.2 |
sub10UnitMgmtFirmwareVersionThe firmware version currently running on the local unit. This is the version of the firmware loaded into the bank number defined in sub10UnitMgmtFirmwareLoadedBank.ro OCTET STRING .1.3.6.1.4.1.39003.3.2.9.3 |
sub10UnitMgmtFirmwareBootVersionThe firmware boot version currently running on the local unit. This is the boot version of the firmware loaded into the bank number defined in sub10UnitMgmtFirmwareLoadedBank.ro OCTET STRING .1.3.6.1.4.1.39003.3.2.9.4 |
sub10UnitMgmtFirmwareActionThe firmware bank action object is used to perform certain actions on a firmware bank. Using this it is possible to reboot the unit, copy banks and upload software to the currently inactive bank. After a Set of this object it's value is always reset to fmwNone(1). The progress of the action may be monitored using a get of the objects 'sub10UnitMgmtFirmwareActStatus' and 'sub10UnitMgmtFirmwareActProgress'. fmwNone(1) - Perform no firmware action unit. fmwReboot(2) - Perform immediate unit reboot of the unit and start the firmware currently loaded in 'sub10UnitMgmtFirmwareSelectBank'. fmwCopyInactiveBank(3) - Copy the firmware currently loaded in 'sub10UnitMgmtFirmwareLoadedBank' to the inactive bank. fmwUploadInactiveBank(4) - Upload the firmware image named by 'sub10UnitMgmtFirmwareUplImage' from the server address 'sub10UnitFirmwareUplServerIp' and load to the inactive bank.rw Enumeration .1.3.6.1.4.1.39003.3.2.9.5 |
sub10UnitMgmtFirmwareBankTableThis tables contains information regarding the firmware banks. SEQUENCE OF Sub10UnitMgmtFirmwareBankEntry .1.3.6.1.4.1.39003.3.2.9.6 |
sub10UnitMgmtFirmwareBankEntryAn entry (row) in the sub10UnitMgmtFirmwareBankTable. Sub10UnitMgmtFirmwareBankEntry .1.3.6.1.4.1.39003.3.2.9.6.1 |
sub10UnitMgmtFirmwareBankIndexThe sub10UnitMgmtFirmwareBankTable index. Sub10FirmwareBank .1.3.6.1.4.1.39003.3.2.9.6.1.1 |
sub10UnitMgmtFirmwareBankVersionThe firmware version currently installed in this bank.ro OCTET STRING .1.3.6.1.4.1.39003.3.2.9.6.1.2 |
sub10UnitMgmtFirmwareBankImageThe firmware image name currently installed in this bank.ro OCTET STRING .1.3.6.1.4.1.39003.3.2.9.6.1.3 |
sub10UnitMgmtFirmwareUplImageThe firmware image name to be uploaded from the server defined by 'sub10UnitFirmwareUplServerIp' using the firmware action 'sub10UnitFirmwareAction=fmwUpload(4)'.rw OCTET STRING .1.3.6.1.4.1.39003.3.2.9.7 |
sub10UnitMgmtFirmwareUplSvrIpThe IP address of the server used to upload the firmware image defined by sub10UnitMgmtFirmwareUplImage.rw OCTET STRING .1.3.6.1.4.1.39003.3.2.9.8 |
sub10UnitMgmtFirmwareFromBankThe bank currently being copied from by the Firmware action sub10UnitMgmtFirmwareAction = fmwCopyInactiveBank(4).ro Sub10FirmwareBank .1.3.6.1.4.1.39003.3.2.9.9 |
sub10UnitMgmtFirmwareToBankThe bank currently being uploaded or copied to by the Firmware actions sub10UnitMgmtFirmwareAction = fmwUploadInactiveBank(4) or sub10UnitMgmtFirmwareAction = fmwCopyInactiveBank(4).ro Sub10FirmwareBank .1.3.6.1.4.1.39003.3.2.9.10 |
sub10UnitMgmtFirmwareActStatusThe status of the firmware bank action which can be repeatedly read using a Get to report the progress of the the action and verify that it has either succeeded or failed. The value is left in the final state after the Firmware Action has completed.ro Enumeration .1.3.6.1.4.1.39003.3.2.9.11 |
sub10UnitMgmtFirmwareActProgressThe % progress of firmware action when loading the firmware image to a firmware bank or copying a firmware image from on1 bank to another bank.ro Integer32 .1.3.6.1.4.1.39003.3.2.9.12 |
sub10UnitMgmtDNS OBJECT IDENTIFIER .1.3.6.1.4.1.39003.3.2.10 |
sub10UnitMgmtDNSTableThis tables defines the Domain Name Servers. SEQUENCE OF Sub10UnitMgmtDNSEntry .1.3.6.1.4.1.39003.3.2.10.1 |
sub10UnitMgmtDNSEntryAn entry (row) in the sub10UnitMgmtDNSTable. Sub10UnitMgmtDNSEntry .1.3.6.1.4.1.39003.3.2.10.1.1 |
sub10UnitMgmtDNSIndexThe sub10UnitMgmtDNSTable index. Unsigned32 .1.3.6.1.4.1.39003.3.2.10.1.1.1 |
sub10UnitMgmtDNServerThe administratively assigned DNS server IP for the unit. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).rw OCTET STRING .1.3.6.1.4.1.39003.3.2.10.1.1.2 |
sub10UnitMgmtEncryption OBJECT IDENTIFIER .1.3.6.1.4.1.39003.3.2.11 |
sub10UnitMgmtEncryptModeThe administratively assigned License key for the unit. The license key enables capabilities within the unit. The capabilities currently available by the configured license key are readable objects.rw Enumeration .1.3.6.1.4.1.39003.3.2.11.1 |
sub10UnitMgmtEncryptKeyThe administratively assigned Encryption key.rw OCTET STRING .1.3.6.1.4.1.39003.3.2.11.2 |
sub10UnitMgmtLicense OBJECT IDENTIFIER .1.3.6.1.4.1.39003.3.2.12 |
sub10UnitMgmtLicenseKeyThe administratively assigned License key for the unit. The license key enables capabilities within the unit. The capabilities currently available by the configured license key are readable objects.rw OCTET STRING .1.3.6.1.4.1.39003.3.2.12.1 |
sub10UnitMgmtLicenseAESIndication if AES encryption is included in the current license key.ro Sub10State .1.3.6.1.4.1.39003.3.2.12.2 |
sub10UnitMgmtSyncE OBJECT IDENTIFIER .1.3.6.1.4.1.39003.3.2.13 |
sub10UnitMgmtSyncEModeThe SyncE Mode. Setting this to syncEProvider(1) configures the unit as a Slave clock. In this case the unit at the other end of the link should be set to syncEConsumer(2). IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).rw Enumeration .1.3.6.1.4.1.39003.3.2.13.1 |
sub10UnitMgmtActions OBJECT IDENTIFIER .1.3.6.1.4.1.39003.3.2.20 |
sub10UnitMgmtTransactionThis is used to commit or rollback the setting of object configuration. It only applies where the objects are subject to transactional requirements. For example the setting of the Unit's IP Address requires that a transaction be committed. If the transaction is not committed after a rollback timeout then the unit will automatically action a rollback to the previous value. The rollback timeout is configurable 'sub10UnitMgmtRollbackTimeout'rw Enumeration .1.3.6.1.4.1.39003.3.2.20.1 |
sub10UnitMgmtTransactionStatusThis indicates either a transaction is currently in progress or if the last transaction was committed successfully or was rolled back.rw Enumeration .1.3.6.1.4.1.39003.3.2.20.2 |
sub10UnitMgmtRollbackTimeoutThe timeout in seconds after which uncommitted Sets will be rolled back to their previous values. A rollback only affects those objects which are subject to transactions.rw Unsigned32 .1.3.6.1.4.1.39003.3.2.20.3 |
sub10UnitMgmtTransactionModeEnables and Disables transactions. If sub10UnitMgmTransactionMode is stateDisabled(0) then no objects are subject to commit and rollback.rw Sub10State .1.3.6.1.4.1.39003.3.2.20.4 |
sub10UnitMgmtResetActionThis is used to reset unit configuration and stats. resetFactoryDefaults(2) - Resets all configuration to Factory Defaults, requires a reboot. resetStatistics(3) - Resets according to setting of sub10UnitMgmtResetStatsGroup For reset of all stats sub10UnitMgmtResetStatsGroup = 'statsGroupAll'. resetAlarmConfig(4) - Resets according to setting of sub10UnitMgmtResetAlarmsType For reset of all alarms sub10UnitMgmtResetAlarmsType = 'resetAlarmTypeAll'.rw Enumeration .1.3.6.1.4.1.39003.3.2.20.5 |
sub10UnitMgmtResetStatsGroupThis is used to reset specific statistics when set prior to submitting sub10UnitMgmtResetAction = resetStatistics(4). For reset of all stats sub10UnitMgmtResetStatsGroup = 'statsGroupAll'.rw Sub10StatsGroup .1.3.6.1.4.1.39003.3.2.20.6 |
sub10UnitMgmtResetAlarmsTypeThis is used to reset specific alarm configuration when set prior to submitting sub10UnitMgmtResetAction = resetAlarmConfig(5). For reset of all alarms sub10UnitMgmtResetAlarmsType = resetAlarmTypeAll(1).rw Enumeration .1.3.6.1.4.1.39003.3.2.20.7 |
sub10Ethernet OBJECT IDENTIFIER .1.3.6.1.4.1.39003.4 |
sub10EthernetStatus OBJECT IDENTIFIER .1.3.6.1.4.1.39003.4.1 |
sub10EthernetLocalStatus OBJECT IDENTIFIER .1.3.6.1.4.1.39003.4.1.1 |
sub10EthLclStatusTableThis table defines the local status objects of the ethernet interface. SEQUENCE OF Sub10EthLclStatusEntry .1.3.6.1.4.1.39003.4.1.1.1 |
sub10EthLclStatusEntryAn entry (row) in the sub10EthLclStatusTable. Sub10EthLclStatusEntry .1.3.6.1.4.1.39003.4.1.1.1.1 |
sub10EthLclLinkStatusThe status of the ethernet link. Synonymous with interfaces OperStatero Sub10OperStatus .1.3.6.1.4.1.39003.4.1.1.1.1.1 |
sub10EthLclMacAddressThe MAC address of the local ethernet interface. Synonymous with interfaces ifPhysAddressro Sub10MacAddress .1.3.6.1.4.1.39003.4.1.1.1.1.2 |
sub10EthLclSpeedThe estimated speed of the local ethernet interface in bits per second. Synonymous with interfaces ifSpeedro Unsigned32 .1.3.6.1.4.1.39003.4.1.1.1.1.3 |
sub10EthLclDuplexThe duplex operation of the local ethernet interfacero Sub10Duplex .1.3.6.1.4.1.39003.4.1.1.1.1.4 |
sub10EthLclMDIThe MDI/MDIX state of the local ethernet interfacero Sub10MDIType .1.3.6.1.4.1.39003.4.1.1.1.1.5 |
sub10EthIfIndexA unique value, greater than zero, for each ethernet interface. It is recommended that values are assigned contiguously starting from 1. This is used as an index to the ethernet based enterprise MIB tables and will reflect the number of physical ethernet ports. Sub10EthInterfaceIndex .1.3.6.1.4.1.39003.4.1.1.1.1.6 |
sub10EthernetRemoteStatus OBJECT IDENTIFIER .1.3.6.1.4.1.39003.4.1.2 |
sub10EthRmtStatusTableThis table defines the remote status objects of the ethernet interface. SEQUENCE OF Sub10EthRmtStatusEntry .1.3.6.1.4.1.39003.4.1.2.1 |
sub10EthRmtStatusEntryAn entry (row) in the sub10EthRmtStatusTable. Sub10EthRmtStatusEntry .1.3.6.1.4.1.39003.4.1.2.1.1 |
sub10EthRmtLinkStatusThe status of the remote ethernet interface. Synonymous but not identical with interfaces OperState on the remote unitro Sub10OperStatus .1.3.6.1.4.1.39003.4.1.2.1.1.1 |
sub10EthRmtMacAddressThe MAC address of the remote ethernet interface. Synonymous with interfaces ifPhysAddress on the remote unit.ro Sub10MacAddress .1.3.6.1.4.1.39003.4.1.2.1.1.2 |
sub10EthRmtSpeedThe estimated speed of the remote ethernet interface in bits per second. Synonymous with interfaces ifSpeed on the remote unitro Unsigned32 .1.3.6.1.4.1.39003.4.1.2.1.1.3 |
sub10EthRmtDuplexThe duplex operation of the remote ethernet interfacero Sub10Duplex .1.3.6.1.4.1.39003.4.1.2.1.1.4 |
sub10EthRmtMDIThe MDI/MDIX state of the remote ethernet interfacero Sub10MDIType .1.3.6.1.4.1.39003.4.1.2.1.1.5 |
sub10EthernetMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.39003.4.2 |
sub10EthMgmtPhy OBJECT IDENTIFIER .1.3.6.1.4.1.39003.4.2.1 |
sub10EthMgmtPhyTableThis table defines the status objects of the ethernet interface. SEQUENCE OF Sub10EthMgmtPhyEntry .1.3.6.1.4.1.39003.4.2.1.1 |
sub10EthMgmtPhyEntryAn entry (row) in the sub10EthMgmtPhyTable. Sub10EthMgmtPhyEntry .1.3.6.1.4.1.39003.4.2.1.1.1 |
sub10EthMgmtPhyAutoNegAuto-negotiation of ethernet interface parameters.rw Sub10State .1.3.6.1.4.1.39003.4.2.1.1.1.1 |
sub10EthMgmtPhySpeedSpeed of the ethernet interface in bits per second used only when sub10UnitMgmtPhyAutoNeg=disabled.rw Unsigned32 .1.3.6.1.4.1.39003.4.2.1.1.1.2 |
sub10EthMgmtPhyDuplexThe duplex operation of the ethernet interface used only when sub10UnitMgmtPhyAutoNeg=disabled.rw Sub10Duplex .1.3.6.1.4.1.39003.4.2.1.1.1.3 |
sub10EthMgmtPhyMDIThe duplex operation of the ethernet interface used only when sub10UnitMgmtPhyAutoNeg=disabled.rw Sub10MDIType .1.3.6.1.4.1.39003.4.2.1.1.1.4 |
sub10EthMgmtVlan OBJECT IDENTIFIER .1.3.6.1.4.1.39003.4.2.2 |
sub10EthMgmtVlanFilteringVLAN filtering on the ethernet interface. This applies to user traffic only not management traffic however to enable VLAN filtering a Unit Management VLAN configuration must be set. See sub10UnitMgmtVlan. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).rw Sub10State .1.3.6.1.4.1.39003.4.2.2.1 |
sub10EthMgmtVlanDefaultEnabledEnable Default VLAN tagging and untagging on the ethernet interface. Only valid when sub10EthMgmtVlanFiltering is enabled. Default VAN tagging allows manipulation of untagged traffic ingressing the interface by applying the specified Default VLAN Id, priority and DEI and manipulation of traffic egressing the ethernet interface that is tagged with the Default VLAN by stripping off the VLAN and transmitting as untagged traffic. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).rw Sub10State .1.3.6.1.4.1.39003.4.2.2.2 |
sub10EthMgmtVlanDefaultIdThe default vlan id which is tagged to all incoming untagged user traffic ingressing the ethernet interface. The default VLAN is also untagged from all user traffic egressing the ethernet interface. The default VLAN must be present in the allowed VLAN table sub10EthMgmtVlanAllowedTable and is only valid when sub10EthMgmtVlanDefaultEnabled and sub10EthMgmtVlanFiltering are enabled. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).rw Sub10VlanId .1.3.6.1.4.1.39003.4.2.2.3 |
sub10EthMgmtVlanDefaultPriorityThe default vlan priority used when tagging the default VLAN to all incoming untagged user traffic ingressing the ethernet interface. Only valid when sub10EthMgmtVlanDefaultEnabled and sub10EthMgmtVlanFiltering are enabled. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).rw Sub10VlanPriority .1.3.6.1.4.1.39003.4.2.2.4 |
sub10EthMgmtVlanDefaultDEIThe default vlan drop eligible indicator used when tagging the default VLAN to all incoming untagged user traffic ingressing the ethernet interface. Only valid when sub10EthMgmtVlanDefaultEnabled and sub10EthMgmtVlanFiltering are enabled. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).rw Sub10State .1.3.6.1.4.1.39003.4.2.2.5 |
sub10EthMgmtVlanIngressActionThe manipulation action used for all ethernet frames being received (ingress) in from the ethernet interface. Only if the default VLAN is set sub10EthMgmtVlanDefaultVlanId > 0 and sub10EthMgmtVlanFiltering is enabled. untag - untag all incoming frames that are tagged with sub10EthMgmtVlanDefaultVlanId. tag - tag all incoming untagged frames with sub10EthMgmtVlanDefaultVlanId, ,sub10EthMgmtVlanDefaultPriority and sub10EthMgmtVlanDefaultDEI. and priority sub10EthMgmtTagWithVlanPriority. drop - discard the frame, do not forward. This is currently fixed to tag all ingressing traffic if a default VLAN is set sub10EthMgmtVlanDefaultVlanId > 0.ro Sub10VlanTagAction .1.3.6.1.4.1.39003.4.2.2.6 |
sub10EthMgmtVlanEgressActionThe manipulation action used for all ethernet frames being transmitted (egress) out of the ethernet interface. Only if the default VLAN is set sub10EthMgmtVlanDefaultVlanId > 0 and sub10EthMgmtVlanFiltering is enabled. untag - untag all outgoing frames that are tagged with sub10EthMgmtVlanDefaultVlanId. tag - tag all outgoing untagged frames with sub10EthMgmtVlanDefaultVlanId, ,sub10EthMgmtVlanDefaultPriority and sub10EthMgmtVlanDefaultDEI. and priority sub10EthMgmtTagWithVlanPriority. drop - discard the frame, do not forward. This is currently fixed to untag all egressing traffic.ro Sub10VlanTagAction .1.3.6.1.4.1.39003.4.2.2.7 |
sub10EthMgmtVlanAllowedTableThis tables defines the VLANs that are allowed to pass through the ethernet interface. The table is only used when the value of sub10EthMgmtVlanFiltering is enabled. The table only contains an entry if the specific vlan is to be allowed to flow through the interface. If a VLAN is not in the table then the ethernet frame is dropped. If sub10EthMgmtVlanFiltering is enabled this table must contain at least 1 VLAN. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2). SEQUENCE OF Sub10EthMgmtVlanAllowedEntry .1.3.6.1.4.1.39003.4.2.2.8 |
sub10EthMgmtVlanAllowedEntryAn entry (row) in the sub10UnitMgmtVlanTable. If the rowStatus is set to notInService(2) then the entry is not valid and no columnar objects are returned. Sub10EthMgmtVlanAllowedEntry .1.3.6.1.4.1.39003.4.2.2.8.1 |
sub10EthMgmtVlanAllowedIndexThe sub10EthMgmtVlanTable index. Unsigned32 .1.3.6.1.4.1.39003.4.2.2.8.1.1 |
sub10EthMgmtVlanAllowedRowStatusThe row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or notInService(2) which indicates that the row is operationally in use or not. The default value is notInService(2) meaning the entry is not used by default. To make the entry valid with already consistent row objects this object must be set to active(1). If row objects are not yet set to consistent values the row status must first be set to createAndWait(5) after which the row status is set to 'notReady(3)'. When in the 'notReady(3)' state row objects can then be set to consistent values before row status can be set to active(1). To delete the row set this to destroy(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.39003.4.2.2.8.1.2 |
sub10EthMgmtVlanAllowedIdThe vlan id which is allowed to pass through the ethernet interface. Duplicate vlan ids in multiple entries of the table with RowStatus 'active(1) are not allowed and any attempt to set a duplicate active entry will be rejected. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).rw Sub10VlanId .1.3.6.1.4.1.39003.4.2.2.8.1.3 |
sub10EthMgmtQoS OBJECT IDENTIFIER .1.3.6.1.4.1.39003.4.2.3 |
sub10EthMgmtQoSActiveStateThis defines if QoS is enabled or disabled.rw Sub10State .1.3.6.1.4.1.39003.4.2.3.1 |
sub10EthMgmtQoSModeDefines the mode of QoS action to be applied to the QoS queues. qosEthernet: - Traffic is mapped to QoS queues - based on Ethernet protocol - VLANId and/or PCP Bits. - See sub10EthMgmtQoSVlanMappingTable - and sub10EthMgmtQoSPCPMappingTable. qosIPMPLS: - Traffic is mapped to QoS queues - based on IP protocol - DSCP markings and/or MPLS traffic - classes. See sub10EthMgmtQoSDSCPMappingTable and sub10EthMgmtQoSMPLSMappingTable.rw Enumeration .1.3.6.1.4.1.39003.4.2.3.2 |
sub10EthMgmtQoSUntaggedQueueThis defines the QoS queue where all untagged ethernet frames are placed. Only valid when sub10EthMgmtQoSQType = 'qosEthernet' For tagged frames see sub10EthMgmtQoSVlanMappingTable and sub10EthMgmtQoSPCPMappingTable.rw Sub10QoSQueue .1.3.6.1.4.1.39003.4.2.3.3 |
sub10EthMgmtQoSQTableThis table configures the characteristics of a Quality of Service queue. There are a fixed number of 8 queues in total and therefore 8 entries in this table indexed 1 thru 8. The number of queue entries in the table is given by the value of sub10EthMgmtQoSQNumber. SEQUENCE OF Sub10EthMgmtQoSQEntry .1.3.6.1.4.1.39003.4.2.3.4 |
sub10EthMgmtQoSQEntryAn entry (row) in the sub10EthMgmtQoSQTable. Sub10EthMgmtQoSQEntry .1.3.6.1.4.1.39003.4.2.3.4.1 |
sub10EthMgmtQoSQIndexThe queue number used as an index, fixed to 8 standard queues. Unsigned32 .1.3.6.1.4.1.39003.4.2.3.4.1.1 |
sub10EthMgmtQoSQSchedulingTypeThe scheduling discipline applied to the queue. qosSPQ - Strict Priority Queueing Queues are serviced in strict priority order. Packets on the queue are servicedd and transmitted until either the queue is empty or a packet is found in a higher queue, in the latter case the higher priority queue take precedence. Individual PCP (CoS) bits or DSCP markings in each packet are not observed within the queue and are not therefore transmitted first according to their relative priority. Instead it is possible to map certain VLANs, PCP bits and DSCP marking to certain queues to achieve priority transmission. The mapping of VLAN, PCP bits or DSCP markings to a specific queue are managed using tables : sub10EthMgmtQoSVlanTable sub10EthMgmtQoSPCPTable sub10EthMgmtQoSDSCPTable qosDWRR - Deficit Weighted Round Robin A weighting is allocated to each queue which defines the number of bytes that can be transmitted from that queue in a single visit of the scheduler. This is used to calculate a quantum which is the number of bytes that can always be transmitted in each visit of the scheduler. A deficit counter is also maintained across visits from the scheduler, at each visit the quantum is added to the deficit. This ensures that on average a queue that is not loaded to its intended capacity will utilise the calculated deficit at times when the queue is busy. At startup Deficit counter is initialised to zero. On each visit of the scheduler packets are transmitted according to the following rules... Deficit = Quantum + Deficit. while (Queue not empty and PktLength <= Deficit) Transmit Pkt Deficit = Deficit - PktLength Remaining Deficit is carried forward to the next visit of the scheduler. Effective behaviour of DWRR is as follows: 1. Available bandwidth is shared fairly when queues are not saturated 2. Lower priority saturated queues will transmit at their allocated service rate. 3. Any remaining bandwidth is shared amongst unsaturated queues. NB. In a mixed configuration where some queues are configured as Strict Priority (SP) and some configured as Deficit Weighted Round Robin (DWRR), then queues configured as SP should all be higher in scheduling priority than those configured as DWRR. This is to avoid the lower priority queues having transmission precedence over higher priority queues.rw Enumeration .1.3.6.1.4.1.39003.4.2.3.4.1.2 |
sub10EthMgmtQoSQDWRRWeightA percentage weighting factor used to calculate the quantum value used to calculate the starting transmission credit at each visit of the queue scheduler. Only for scheduling type Deficit Weighted Round Robin. sub10EthMgmtQoSQSchedulingType = 'qosDWRR' The weighting is calculated as the ratio of the transmit rate configured as a percentage. The internal implementation of DWRR will calculate the correct quantum based on total bandwidth available.rw Unsigned32 .1.3.6.1.4.1.39003.4.2.3.4.1.3 |
sub10EthMgmtQoSQCongestionPolicyThe policy used when a queue is congested.rw Enumeration .1.3.6.1.4.1.39003.4.2.3.4.1.4 |
sub10EthMgmtQoSQSizeMaxThe maximum size of the queue expressed in packets.ro Unsigned32 .1.3.6.1.4.1.39003.4.2.3.4.1.5 |
sub10EthMgmtQoSQLenThe current length of the queue expressed in packets.ro Unsigned32 .1.3.6.1.4.1.39003.4.2.3.4.1.6 |
sub10EthMgmtQoSVlanMappingNumberThe number of sub10EthMgmtQoSVlanMappingTable table entries present on this system.ro Unsigned32 .1.3.6.1.4.1.39003.4.2.3.5 |
sub10EthMgmtQoSVlanTableThis table configures the Quality of Service Vlan to queue mapping. Multiple Vlans may be mapped to any queue. On egress of the ethernet interface all pkts tagged with the specific Vlan Id are inserted onto the specified queue. See sub10EthMgmtQoSQTable for more information on QoS queueing. The number of entries in the table is given by the value of sub10EthMgmtQoSVlanNumber. SEQUENCE OF Sub10EthMgmtQoSVlanEntry .1.3.6.1.4.1.39003.4.2.3.6 |
sub10EthMgmtQoSVlanEntryAn entry (row) in the sub10EthMgmtQoSVlanMappingTable. Sub10EthMgmtQoSVlanEntry .1.3.6.1.4.1.39003.4.2.3.6.1 |
sub10EthMgmtQoSVlanIndexThe sub10EthMgmtQoSVlanMappingTable index. Unsigned32 .1.3.6.1.4.1.39003.4.2.3.6.1.1 |
sub10EthMgmtQoSVlanIdThe vlan id used as an index to the table and which is egressing through the ethernet interface and which should be placed on the queue specified by sub10EthMgmtQoSVlanQueueIndex.rw Sub10VlanId .1.3.6.1.4.1.39003.4.2.3.6.1.2 |
sub10EthMgmtQoSVlanQueueThe queue number which identifies the specific queue where the packets that are tagged with the Vlan Id specified in sub10EthMgmtQoSVlanId are inserted.rw Sub10QoSQueue .1.3.6.1.4.1.39003.4.2.3.6.1.3 |
sub10EthMgmtQoSPCPTableThis table configures the Quality of Service Priority Code Point (PCP) or Pbits to queue mapping. Multiple PCPs may be mapped to the same queue but the same PCP cannot be mapped to more than one queue. This table has a maximum size of 8 entries with exactly 1 entry per PCP bit. On egress of the ethernet interface all pkts tagged with the specific PCP bit (irrespective of its Vlan Id) is inserted on the specified queue. See sub10EthMgmtQoSQTable for more information on QoS queueing. The number of entries in the table is given by the value of sub10EthMgmtQoSPCPMappingNumber (maximum 8). SEQUENCE OF Sub10EthMgmtQoSPCPEntry .1.3.6.1.4.1.39003.4.2.3.8 |
sub10EthMgmtQoSPCPEntryAn entry (row) in the sub10EthMgmtQoSPCPMappingTable. Sub10EthMgmtQoSPCPEntry .1.3.6.1.4.1.39003.4.2.3.8.1 |
sub10EthMgmtQoSPCPIndexThe sub10EthMgmtQoSPCPTable index. This represents the PCP bits priority value. sub10EthMgmtQoSPCPIndex(1)=PCPBit(0) sub10EthMgmtQoSPCPIndex(2)=PCPBit(1) sub10EthMgmtQoSPCPIndex(3)=PCPBit(2) sub10EthMgmtQoSPCPIndex(4)=PCPBit(3) sub10EthMgmtQoSPCPIndex(5)=PCPBit(4) sub10EthMgmtQoSPCPIndex(6)=PCPBit(5) sub10EthMgmtQoSPCPIndex(7)=PCPBit(6) sub10EthMgmtQoSPCPIndex(8)=PCPBit(7) Unsigned32 .1.3.6.1.4.1.39003.4.2.3.8.1.1 |
sub10EthMgmtQoSPCPQueueThe queue number in the sub10EthMgmtQoSQTable which identifies the specific queue where the packets tagged with the specific PCP bit sub10EthMgmtQoSPCPIndex are inserted. There are up to 8 queues.rw Sub10QoSQueue .1.3.6.1.4.1.39003.4.2.3.8.1.2 |
sub10EthMgmtQoSDSCPMappingNumberThe number of sub10EthMgmtQoSDSCPMappingTable table entries present on this system.ro Unsigned32 .1.3.6.1.4.1.39003.4.2.3.9 |
sub10EthMgmtQoSDSCPTableThis table configures the Quality of Service Differentiated Services Code Point (DSCP) to queue mapping. Multiple DSCPs may be mapped to the same queue but the same DSCP cannot be mapped to more than one queue. This table has a maximum size of 64 with 1 entry per DSCP value. On egress of the ethernet interface all pkts tagged with the specific DSCP marking in the IP header will be inserted onto the specified queue. See sub10EthMgmtQoSQTable for more information on QoS queueing. The number of entries in the table is given by the value of sub10EthMgmtQoSDSCPMappingNumber (maximum 64). SEQUENCE OF Sub10EthMgmtQoSDSCPEntry .1.3.6.1.4.1.39003.4.2.3.10 |
sub10EthMgmtQoSDSCPEntryAn entry (row) in the sub10EthMgmtQoSDSCPMappingTable. Sub10EthMgmtQoSDSCPEntry .1.3.6.1.4.1.39003.4.2.3.10.1 |
sub10EthMgmtQoSDSCPIndexThe sub10EthMgmtQoSDSCPTable index. Unsigned32 .1.3.6.1.4.1.39003.4.2.3.10.1.1 |
sub10EthMgmtQoSDSCPMarkingThe DSCP value used as an index to the table. This defines the DSCP value which when egressing through the ethernet interface is placed on the queue specified by sub10EthMgmtQoSVlanQueueIndex.rw Unsigned32 .1.3.6.1.4.1.39003.4.2.3.10.1.2 |
sub10EthMgmtQoSDSCPQueueThe queue number in the sub10EthMgmtQoSQTable which identifies the specific queue where the packets tagged with the specific DSCP marking sub10EthMgmtQoSDSCP are inserted.rw Sub10QoSQueue .1.3.6.1.4.1.39003.4.2.3.10.1.3 |
sub10EthMgmtQoSMPLSMappingNumberThe number of sub10EthMgmtQoSMPLSMappingTable table entries present on this system.This is equivelent to the number of MPLS Traffic classesro Unsigned32 .1.3.6.1.4.1.39003.4.2.3.11 |
sub10EthMgmtQoSMPLSTableThis table configures the Quality of Service Multi-Protocol Label Switching protocol (MPLS) Traffic Class (TC) to queue mapping. Multiple MPLS TCs may be mapped to the same queue but the same MPLS TC cannot be mapped to more than one queue. This table has a maximum size of 64 with 1 entry per MPLS TC value. On egress of the ethernet interface all pkts tagged with the specific MPLS TC in the IP header will be inserted onto the specified queue. See sub10EthMgmtQoSQTable for more information on QoS queueing. The number of entries in the table is given by the value of sub10EthMgmtQoSMPLSMappingNumber (maximum 8). SEQUENCE OF Sub10EthMgmtQoSMPLSEntry .1.3.6.1.4.1.39003.4.2.3.12 |
sub10EthMgmtQoSMPLSEntryAn entry (row) in the sub10EthMgmtQoSMPLSMappingTable. Sub10EthMgmtQoSMPLSEntry .1.3.6.1.4.1.39003.4.2.3.12.1 |
sub10EthMgmtQoSMPLSIndexThe sub10EthMgmtQoSMPLSMappingTable index. Unsigned32 .1.3.6.1.4.1.39003.4.2.3.12.1.1 |
sub10EthMgmtQoSMPLSTrafficClassThe MPLS Traffic Class value used as an index to the table. This defines the MPLS TC value which when egressing through the ethernet interface is placed on the queue specified by sub10EthMgmtQoSVlanQueueIndex.rw Unsigned32 .1.3.6.1.4.1.39003.4.2.3.12.1.2 |
sub10EthMgmtQoSMPLSQueueThe queue number in the sub10EthMgmtQoSQTable which identifies the specific queue where the packets tagged with the specific MPLS Traffic Class sub10EthMgmtQoSMPLSTrafficClass are inserted.rw Sub10QoSQueue .1.3.6.1.4.1.39003.4.2.3.12.1.3 |
sub10EthMgmtStats OBJECT IDENTIFIER .1.3.6.1.4.1.39003.4.2.4 |
sub10EthMgmtStatsActiveTableThis table maintains an entry for each Ethernet statistic that is enabled and active. SEQUENCE OF Sub10EthMgmtStatsActiveEntry .1.3.6.1.4.1.39003.4.2.4.1 |
sub10EthMgmtStatsActiveEntryAn entry in the sub10EthMgmtStatsActiveTable. Each entry represents an object instance of ethernet stats and it's current state. Sub10EthMgmtStatsActiveEntry .1.3.6.1.4.1.39003.4.2.4.1.1 |
sub10EthMgmtStatsActiveIndexThe number of ethernet stats objects used as an index to this table. Unsigned32 .1.3.6.1.4.1.39003.4.2.4.1.1.1 |
sub10EthMgmtStatsActiveNameThe stats object name. This is the name of the ethernet stats object in the sub10EthernetStatsCurrent group.ro OCTET STRING .1.3.6.1.4.1.39003.4.2.4.1.1.2 |
sub10EthMgmtStatsActiveStateIf set to 'enabled' the statistic is active.rw Sub10State .1.3.6.1.4.1.39003.4.2.4.1.1.3 |
sub10EthernetStats OBJECT IDENTIFIER .1.3.6.1.4.1.39003.4.3 |
sub10EthStatsTimeElapsedThe time that has elapsed from the beginning of the statistical measurement period. This is normally time from just after the last reboot time when the statistics module begins it's calculations. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.ro OCTET STRING .1.3.6.1.4.1.39003.4.3.1 |
sub10EthernetStatsCurrent OBJECT IDENTIFIER .1.3.6.1.4.1.39003.4.3.2 |
sub10EthernetStatsCurrTableThis table defines the current stats objects of the ethernet interface. SEQUENCE OF Sub10EthernetStatsCurrEntry .1.3.6.1.4.1.39003.4.3.2.1 |
sub10EthernetStatsCurrEntryAn entry (row) in the sub10EthernetStatsCurrTable. Sub10EthernetStatsCurrEntry .1.3.6.1.4.1.39003.4.3.2.1.1 |
sub10EthStatsCurrRxOctetsThe number of octets received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.1 |
sub10EthStatsCurrRxGoodFrmsThe number of good frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.2 |
sub10EthStatsCurrRxBcastFrmsThe number of broadcast frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.3 |
sub10EthStatsCurrRxMcastFrmsThe number of multicast frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.4 |
sub10EthStatsCurrRxPauseFrmsThe number of Pause frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.5 |
sub10EthStatsCurrRxCRCErrsThe number of CRC errors received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.6 |
sub10EthStatsCurrRxAlignErrsThe number of Alignment coding errors received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.7 |
sub10EthStatsCurrRxOversizedThe number of Oversized frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.8 |
sub10EthStatsCurrRxJabberFrmsThe number of Jabber frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.9 |
sub10EthStatsCurrRxUndersizedThe number of Undersized frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.10 |
sub10EthStatsCurrRxFragmentsThe number of frame fragments received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.11 |
sub10EthStatsCurrRxSOFOvrnsThe number of frames with Start of Frame (SOF) Overruns received over the Ethernet interface or were dropped due to FIFO resource limitations since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.12 |
sub10EthStatsCurrTxOctetsThe number of octets transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.13 |
sub10EthStatsCurrTxGoodFrmsThe number of ethernet frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.14 |
sub10EthStatsCurrTxBcastFrmsThe number of broadcast frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.15 |
sub10EthStatsCurrTxMcastFrmsThe number of multicast frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.16 |
sub10EthStatsCurrTxPauseFrmsThe number of Pause frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.17 |
sub10EthStatsCurrTxDeferredThe number of Deferred frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.18 |
sub10EthStatsCurrTxCollsnThe number of Collision frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.19 |
sub10EthStatsCurrTxSnglCollsnThe number of Single Collision frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.20 |
sub10EthStatsCurrTxMlplCollsnThe number of Multiple Collision frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.21 |
sub10EthStatsCurrTxExsvCollsnThe number of Excessive Collision for which transmission was abandoned over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.22 |
sub10EthStatsCurrTxLtCollsnThe number of Late Collision for which transmission was abandoned over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.23 |
sub10EthStatsCurrTxCSenseErrsThe number of Carrier Sense Errored frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.24 |
sub10EthStatsCurrPkts64OctetsThe total number of 64-byte frames received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.25 |
sub10EthStatsCurrPkts65T127The total number of frames of size 65 to 127 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.26 |
sub10EthStatsCurrPkts128T255The total number of frames of size 128 to 255 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.27 |
sub10EthStatsCurrPkts256T511The total number of frames of size 256 to 511 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.28 |
sub10EthStatsCurrPkts512T1023The total number of frames of size 512 to 1023 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.29 |
sub10EthStatsCurrPkts1024TMaxThe total number of frames of size 1024 to RX_MAXLEN bytes for receive or 1024 up for transmit on the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter32 .1.3.6.1.4.1.39003.4.3.2.1.1.30 |
sub10EthStatsCurrRxMbpsThe Rx throughput in Mbps in this second.ro Sub10ThroughputMbps .1.3.6.1.4.1.39003.4.3.2.1.1.31 |
sub10EthStatsCurrTxMbpsThe Tx throughput in Mbps in this second.ro Sub10ThroughputMbps .1.3.6.1.4.1.39003.4.3.2.1.1.32 |
sub10EthStatsCurrRxMbpsMinThe minimum Rx throughput in Mbps in the last rolling minute.ro Sub10ThroughputMbps .1.3.6.1.4.1.39003.4.3.2.1.1.33 |
sub10EthStatsCurrRxMbpsMaxThe maximum Rx throughput in Mbps in the last rolling minute.ro Sub10ThroughputMbps .1.3.6.1.4.1.39003.4.3.2.1.1.34 |
sub10EthStatsCurrRxMbpsAvgThe average Rx throughput in Mbps in the last rolling minute.ro Sub10ThroughputMbps .1.3.6.1.4.1.39003.4.3.2.1.1.35 |
sub10EthStatsCurrTxMbpsMinThe minimum Tx throughput in Mbps in the last rolling minute.ro Sub10ThroughputMbps .1.3.6.1.4.1.39003.4.3.2.1.1.36 |
sub10EthStatsCurrTxMbpsMaxThe maximum Tx throughput in Mbps in the last rolling minute.ro Sub10ThroughputMbps .1.3.6.1.4.1.39003.4.3.2.1.1.37 |
sub10EthStatsCurrTxMbpsAvgThe average Tx throughput in Mbps in the last rolling minute.ro Sub10ThroughputMbps .1.3.6.1.4.1.39003.4.3.2.1.1.38 |
sub10EthStatsCurrRmtRxMbpsAvgThe average Rx throughput of the remote unit in Mbps in the last rolling minute.ro Sub10ThroughputMbps .1.3.6.1.4.1.39003.4.3.2.1.1.39 |
sub10EthStatsCurrRmtTxMbpsAvgThe average Tx throughput of the remote unit in Mbps in the last rolling minute.ro Sub10ThroughputMbps .1.3.6.1.4.1.39003.4.3.2.1.1.40 |
sub10EthernetStatsHistory OBJECT IDENTIFIER .1.3.6.1.4.1.39003.4.3.3 |
sub10EthernetStats15mHistory OBJECT IDENTIFIER .1.3.6.1.4.1.39003.4.3.3.1 |
sub10EthStats15mHistIntvlsThe number of valid table entries in sub10EthStats15mHistTable on this system. There is one entry per 15 minute interval. If the unit has been running for a minimum of 24 hours and collecting valid data then the number of entries will be 96, this represents a total maximum of 24 hours worth of data.ro Unsigned32 .1.3.6.1.4.1.39003.4.3.3.1.1 |
sub10EthStats15mHistTableThis table maintains a history of Ethernet statistics based on 15 minute intervals. There are a maximum of 96 intervals which represent 24 hours of data. This table along with the 1m and 1d tables provide a history of the performance of the radio interface. This information may then be post processed and used as a troubleshooting tool. An entry in the table represents a 15 minute interval where each interval is synchronised to the clock on the hour. There are up to 96 intervals starting at 1. The number of valid entries in the table is given by the value of sub10EthStats15mHistIntvls of which the minimum is 0 and the maximum is 96 therefore providing up to a maximum of 24 hours of 15 minute interval data. The first entry indexed by 1 represents the most recent completed 15 minute interval. At the end of each interval all entries of 'index' are copied into entry 'index+1'. If the number of valid intervals is 96 then the least recent interval entry is summarised into 24 hour stats and then discarded. SEQUENCE OF Sub10EthStats15mHistEntry .1.3.6.1.4.1.39003.4.3.3.1.2 |
sub10EthStats15mHistEntryAn entry in the sub10EthStats15mHistTable. Each entry represents 15 minute of performance management data where the first entry with index=1 is the most recent 15 minute interval and the last entry with index=n (up to 96) is the least recent 15 minute interval. The number of valid intervals is sub10EthStats15mHistIntvls. Sub10EthStats15mHistEntry .1.3.6.1.4.1.39003.4.3.3.1.2.1 |
sub10EthStats15mHistIntvlThe interval number used as an index to this table. Interval numbers start at 1 (the most recent 15 minute interval) and have a maximum value of 96 (the least recent 15 minute interval). Unsigned32 .1.3.6.1.4.1.39003.4.3.3.1.2.1.1 |
sub10EthStats15mHistTimeThe local system time when this 15m history entry was created. This represents the end of the 15 minute interval for which the associated stats with the same sub10EthStats15mHistIntvl table index are relevant.ro Sub10DateTime .1.3.6.1.4.1.39003.4.3.3.1.2.1.2 |
sub10EthStats15mHistRxOctetsThe number of octets received over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.3 |
sub10EthStats15mHistRxGoodFrmsThe number of good frames received over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.4 |
sub10EthStats15mHistRxBcastFrmsThe number of broadcast frames received over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.5 |
sub10EthStats15mHistRxMcastFrmsThe number of multicast frames received over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.6 |
sub10EthStats15mHistRxPauseFrmsThe number of Pause frames received over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.7 |
sub10EthStats15mHistRxCRCErrsThe number of CRC errors received over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.8 |
sub10EthStats15mHistRxAlignErrsThe number of Alignment coding errors received over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.9 |
sub10EthStats15mHistRxOversizedThe number of Oversized frames received over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.10 |
sub10EthStats15mHistRxJabberFrmsThe number of Jabber frames received over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.11 |
sub10EthStats15mHistRxUndersizedThe number of Undersized frames received over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.12 |
sub10EthStats15mHistRxFragmentsThe number of frame fragments received over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.13 |
sub10EthStats15mHistRxSOFOvrnsThe number of frames with Start of Frame (SOF) Overruns received over the Ethernet interface or were dropped due to FIFO resource limitations in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.14 |
sub10EthStats15mHistTxOctetsThe number of octets transmitted over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.15 |
sub10EthStats15mHistTxGoodFrmsThe number of ethernet frames transmitted over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.16 |
sub10EthStats15mHistTxBcastFrmsThe number of broadcast frames transmitted over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.17 |
sub10EthStats15mHistTxMcastFrmsThe number of multicast frames transmitted over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.18 |
sub10EthStats15mHistTxPauseFrmsThe number of Pause frames transmitted over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.19 |
sub10EthStats15mHistTxDeferredThe number of Deferred frames transmitted over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.20 |
sub10EthStats15mHistTxCollsnThe number of Collision frames transmitted over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.21 |
sub10EthStats15mHistTxSnglCollsnThe number of Single Collision frames transmitted over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.22 |
sub10EthStats15mHistTxMlplCollsnThe number of Multiple Collision frames transmitted over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.23 |
sub10EthStats15mHistTxExsvCollsnThe number of Excessive Collision for which transmission was abandoned over the Ethernet interface in this 1 minute interval. 5 For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.24 |
sub10EthStats15mHistTxLtCollsnThe number of Late Collision for which transmission was abandoned over the Ethernet interface in this 15 minute interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.25 |
sub10EthStats15mHistTxCSenseErrsThe number of Carrier Sense Errored frames transmitted over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.26 |
sub10EthStats15mHistPkts64OctetsThe total number of 64-byte frames received and transmitted on the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.27 |
sub10EthStats15mHistPkts65T127The total number of frames of size 65 to 127 bytes received and transmitted on the Ethernet interface in this 15 minute interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.28 |
sub10EthStats15mHistPkts128T255The total number of frames of size 128 to 255 bytes received and transmitted on the Ethernet interface in this 15 minute interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.29 |
sub10EthStats15mHistPkts256T511The total number of frames of size 256 to 511 bytes received and transmitted on the Ethernet interface in this 15 minute interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.30 |
sub10EthStats15mHistPkts512T1023The total number of frames of size 512 to 1023 bytes received and transmitted on the Ethernet interface in this 15 minute interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.31 |
sub10EthStats15mHistPkts1024TMaxThe total number of frames of size 1024 to RX_MAXLEN bytes for receive or 1024 up for transmit on the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.1.2.1.32 |
sub10EthStats15mHistRxMbpsMinThe minimum Rx throughput in Mbps in this 15 minute interval.ro Sub10ThroughputMbps .1.3.6.1.4.1.39003.4.3.3.1.2.1.33 |
sub10EthStats15mHistRxMbpsMaxThe maximum Rx throughput in Mbps in this 15 minute interval.ro Sub10ThroughputMbps .1.3.6.1.4.1.39003.4.3.3.1.2.1.34 |
sub10EthStats15mHistRxMbpsAvgThe average Rx throughput in Mbps in this 15 minute interval.ro Sub10ThroughputMbps .1.3.6.1.4.1.39003.4.3.3.1.2.1.35 |
sub10EthStats15mHistTxMbpsMinThe minimum Tx throughput in Mbps in this 15 minute interval.ro Sub10ThroughputMbps .1.3.6.1.4.1.39003.4.3.3.1.2.1.36 |
sub10EthStats15mHistTxMbpsMaxThe maximum Tx throughput in Mbps in this 15 minute interval.ro Sub10ThroughputMbps .1.3.6.1.4.1.39003.4.3.3.1.2.1.37 |
sub10EthStats15mHistTxMbpsAvgThe average Tx throughput in Mbps in this 15 minute interval.ro Sub10ThroughputMbps .1.3.6.1.4.1.39003.4.3.3.1.2.1.38 |
sub10EthStats1dHistory OBJECT IDENTIFIER .1.3.6.1.4.1.39003.4.3.3.2 |
sub10EthStats1dHistIntvlsThe number of valid table entries in sub10EthStats1dHistTable on this system. There is one entry per 1 day interval. If the unit has been running for a minimum of 30 days and collecting valid data then the number of entries will be 30, this represents a total maximum of 30 days worth of data.ro Unsigned32 .1.3.6.1.4.1.39003.4.3.3.2.1 |
sub10EthStats1dHistTableThis table maintains a history of Radio statistics based on 1 day intervals. There are a maximum of 30 intervals which represent 30 days of data. This table along with the 1m and 15m tables provide a history of the performance of the radio interface. This information may then be post processed and used as a troubleshooting tool. An entry in the table represents a 1 day interval where each interval is synchronised to the clock on the hour. There are up to 30 intervals starting at 1. The number of valid entries in the table is given by the value of sub10EthStats1dHistIntvls of which the minimum is 0 and the maximum is 30 therefore providing up to a maximum of 30 days of 1 day interval data. The first entry indexed by 1 represents the most recent completed 1 day interval. At the end of each interval all entries of 'index' are copied into entry 'index+1'. If the number of valid intervals is 30 then the least recent interval entry is discarded. SEQUENCE OF Sub10EthStats1dHistEntry .1.3.6.1.4.1.39003.4.3.3.2.2 |
sub10EthStats1dHistEntryAn entry in the sub10EthStats1dHistTable. Each entry represents 1 day of performance management data where the first entry with index=1 is the most recent 1 day interval and the last entry with index=n (up to 30) is the least recent 1 day interval. The number of valid intervals is given by the value of sub10EthStats1dHistIntvls. Sub10EthStats1dHistEntry .1.3.6.1.4.1.39003.4.3.3.2.2.1 |
sub10EthStats1dHistIntvlThe interval number used as an index to this table. Interval numbers start at 1 (the most recent 1 day interval) and have a maximum value of 30 (the least recent 1 day interval). Unsigned32 .1.3.6.1.4.1.39003.4.3.3.2.2.1.1 |
sub10EthStats1dHistTimeThe local system time when this 1d history entry was created. This represents the end of the 1 day interval for which the associated stats with the same sub10EthStats1dHistIntvl table index are relevant.ro Sub10DateTime .1.3.6.1.4.1.39003.4.3.3.2.2.1.2 |
sub10EthStats1dHistRxOctetsThe number of octets received over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.3 |
sub10EthStats1dHistRxGoodFrmsThe number of good frames received over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.4 |
sub10EthStats1dHistRxBcastFrmsThe number of broadcast frames received over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.5 |
sub10EthStats1dHistRxMcastFrmsThe number of multicast frames received over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.6 |
sub10EthStats1dHistRxPauseFrmsThe number of Pause frames received over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.7 |
sub10EthStats1dHistRxCRCErrsThe number of CRC errors received over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.8 |
sub10EthStats1dHistRxAlignErrsThe number of Alignment coding errors received over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.9 |
sub10EthStats1dHistRxOversizedThe number of Oversized frames received over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.10 |
sub10EthStats1dHistRxJabberFrmsThe number of Jabber frames received over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.11 |
sub10EthStats1dHistRxUndersizedThe number of Undersized frames received over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.12 |
sub10EthStats1dHistRxFragmentsThe number of frame fragments received over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.13 |
sub10EthStats1dHistRxSOFOvrnsThe number of frames with Start of Frame (SOF) Overruns received over the Ethernet interface or were dropped due to FIFO resource limitations in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.14 |
sub10EthStats1dHistTxOctetsThe number of octets transmitted over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.15 |
sub10EthStats1dHistTxGoodFrmsThe number of ethernet frames transmitted over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.16 |
sub10EthStats1dHistTxBcastFrmsThe number of broadcast frames transmitted over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.17 |
sub10EthStats1dHistTxMcastFrmsThe number of multicast frames transmitted over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.18 |
sub10EthStats1dHistTxPauseFrmsThe number of Pause frames transmitted over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.19 |
sub10EthStats1dHistTxDeferredThe number of Deferred frames transmitted over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.20 |
sub10EthStats1dHistTxCollsnThe number of Collision frames transmitted over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.21 |
sub10EthStats1dHistTxSnglCollsnThe number of Single Collision frames transmitted over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.22 |
sub10EthStats1dHistTxMlplCollsnThe number of Multiple Collision frames transmitted over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.23 |
sub10EthStats1dHistTxExsvCollsnThe number of Excessive Collision for which transmission was abandoned over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.24 |
sub10EthStats1dHistTxLtCollsnThe number of Late Collision for which transmission was abandoned over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.25 |
sub10EthStats1dHistTxCSenseErrsThe number of Carrier Sense Errored frames transmitted over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.26 |
sub10EthStats1dHistPkts64OctetsThe total number of 64-byte frames received and transmitted on the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.27 |
sub10EthStats1dHistPkts65T127The total number of frames of size 65 to 127 bytes received and transmitted on the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.28 |
sub10EthStats1dHistPkts128T255The total number of frames of size 128 to 255 bytes received and transmitted on the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.29 |
sub10EthStats1dHistPkts256T511The total number of frames of size 256 to 511 bytes received and transmitted on the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.30 |
sub10EthStats1dHistPkts512T1023The total number of frames of size 512 to 1023 bytes received and transmitted on the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.31 |
sub10EthStats1dHistPkts1024TMaxThe total number of frames of size 1024 to RX_MAXLEN bytes for receive or 1024 up for transmit on the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'.ro Counter64 .1.3.6.1.4.1.39003.4.3.3.2.2.1.32 |
sub10EthStats1dHistRxMbpsMinThe minimum Rx throughput in Mbps in this 15 minute interval.ro Sub10ThroughputMbps .1.3.6.1.4.1.39003.4.3.3.2.2.1.33 |
sub10EthStats1dHistRxMbpsMaxThe maximum Rx throughput in Mbps in this 15 minute interval.ro Sub10ThroughputMbps .1.3.6.1.4.1.39003.4.3.3.2.2.1.34 |
sub10EthStats1dHistRxMbpsAvgThe average Rx throughput in Mbps in this 1 day interval.ro Sub10ThroughputMbps .1.3.6.1.4.1.39003.4.3.3.2.2.1.35 |
sub10EthStats1dHistTxMbpsMinThe minimum Tx throughput in Mbps in this 1 day interval.ro Sub10ThroughputMbps .1.3.6.1.4.1.39003.4.3.3.2.2.1.36 |
sub10EthStats1dHistTxMbpsMaxThe maximum Tx throughput in Mbps in this 1 day interval.ro Sub10ThroughputMbps .1.3.6.1.4.1.39003.4.3.3.2.2.1.37 |
sub10EthStats1dHistTxMbpsAvgThe average Tx throughput in Mbps in this 1 day interval.ro Sub10ThroughputMbps .1.3.6.1.4.1.39003.4.3.3.2.2.1.38 |
sub10Radio OBJECT IDENTIFIER .1.3.6.1.4.1.39003.5 |
sub10RadioStatus OBJECT IDENTIFIER .1.3.6.1.4.1.39003.5.1 |
sub10RadioLocalStatus OBJECT IDENTIFIER .1.3.6.1.4.1.39003.5.1.1 |
sub10RadioLclLinkStatusThe status of the local radio link.ro Sub10RadioLinkState .1.3.6.1.4.1.39003.5.1.1.1 |
sub10RadioLclTxPowerThe current transmit power of the local radio link, measured in dBm.ro Integer32(-30..30) UNITS "dBm" .1.3.6.1.4.1.39003.5.1.1.2 |
sub10RadioLclRxPowerThe current receive power of the local radio link, measured in dBm.ro OCTET STRING .1.3.6.1.4.1.39003.5.1.1.3 |
sub10RadioLclVectErrThe current vector error of the local radio link, measured in dB.ro OCTET STRING .1.3.6.1.4.1.39003.5.1.1.4 |
sub10RadioLclLnkLossThe current link loss of the local radio link, measured in dB.ro OCTET STRING .1.3.6.1.4.1.39003.5.1.1.5 |
sub10RadioLclAlignmentModeAlignment mode is modeAlignment(1) if the alignment / reset cap has been removed for > 5sec otherwise modeNormal(0). The alignment mode is managed using sub10RadioMgmtAlignmentMode.ro Sub10AlignmentMode .1.3.6.1.4.1.39003.5.1.1.6 |
sub10RadioLclDataRateThe maximum data rate of the Airside interface.ro Sub10RadioDataRate .1.3.6.1.4.1.39003.5.1.1.7 |
sub10RadioLclMWUTypeThe local MWU typero Sub10MWUType .1.3.6.1.4.1.39003.5.1.1.8 |
sub10RadioLclAFERThe Air Frame Error Ratio in the last second. This is the % of lost air frames based on the UFEC count in the previous second divided by the expected Air Frame Rate(AFR) in 1 second.ro OCTET STRING .1.3.6.1.4.1.39003.5.1.1.9 |
sub10RadioLclRxModulationModeThe current Receive Modulation Mode on the local unit.ro Sub10ModulationMode .1.3.6.1.4.1.39003.5.1.1.10 |
sub10RadioLclTxModulationModeThe current Transmit Modulation Mode on the local unit.ro Sub10ModulationMode .1.3.6.1.4.1.39003.5.1.1.11 |
sub10RadioRemoteStatus OBJECT IDENTIFIER .1.3.6.1.4.1.39003.5.1.2 |
sub10RadioRmtLinkStatusThe status of the remote radio link.ro Sub10RadioLinkState .1.3.6.1.4.1.39003.5.1.2.1 |
sub10RadioRmtTxPowerThe current transmit power of the remote radio link, measured in dBm.ro Integer32(-100..100) UNITS "dBm" .1.3.6.1.4.1.39003.5.1.2.2 |
sub10RadioRmtRxPowerThe current receive power of the remote radio link, measured in dBm.ro OCTET STRING .1.3.6.1.4.1.39003.5.1.2.3 |
sub10RadioRmtVectErrThe current vector error of the remote radio link, measured in dB.ro OCTET STRING .1.3.6.1.4.1.39003.5.1.2.4 |
sub10RadioRmtLnkLossThe current link loss of the remote radio link, measured in dB.ro OCTET STRING .1.3.6.1.4.1.39003.5.1.2.5 |
sub10RadioRmtAlignmentModeThe remote radio unit's Alignment mode. Alignment mode is modeAlignment(1) if the alignment / reset cap has been removed for > 5sec otherwise modeNormal(0).ro Sub10AlignmentMode .1.3.6.1.4.1.39003.5.1.2.7 |
sub10RadioRmtAFERThe remote unit Air Frame Error Ratio in this second. This is the % of lost air frames based on the UFEC count in the previous second divided by the expected Air Frame Rate(AFR) in 1 second.ro OCTET STRING .1.3.6.1.4.1.39003.5.1.2.8 |
sub10RadioMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.39003.5.2 |
sub10RadioMgmtTxPowerLimitThe configured transmit power of radio link. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).rw Sub10TxPowerLimit .1.3.6.1.4.1.39003.5.2.1 |
sub10RadioMgmtTxRxFreqThe configured TX/RX frequency pairs of radio link. Each enumerated option represents the TX and RX frequency pair settings in MHz. Options are available for E-Band at channel width 250MHz and 500MHz and E-Band channel width 500MHz. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).rw Enumeration .1.3.6.1.4.1.39003.5.2.2 |
sub10RadioMgmtAPCModeAutomatic Transmit Power Control. The initial setting of transmit power used is defined by sub10RadioMgmtTxPower. If sub10RadioMgmtAPCMode is enabled then the transmit power may then vary according to the RSSI measured from the remote end of the link. The actual transmit power is readable in sub10RadioLclTxPower at the local end and sub10RadioRmtTxPower at the remote end of the link. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).rw Enumeration .1.3.6.1.4.1.39003.5.2.3 |
sub10RadioMgmtModulationModeSet the highest order Modulation Mode attempted by Adaptive Modulation. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).rw Sub10ModulationMode .1.3.6.1.4.1.39003.5.2.4 |
sub10RadioMgmtAmodAdaptive Modulation mode.rw Sub10State .1.3.6.1.4.1.39003.5.2.5 |
sub10RadioMgmtAlignmentModeAlignment mode is modeAlignment(1) if the alignment / reset cap has been removed for > 5sec otherwise modeNormal(0). The alignment mode can be manually changed by setting this object.rw Sub10AlignmentMode .1.3.6.1.4.1.39003.5.2.6 |
sub10RadioMgmtMWUChannelWidthMWU Channel width. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).rw Enumeration .1.3.6.1.4.1.39003.5.2.8 |
sub10RadioMgmtStats OBJECT IDENTIFIER .1.3.6.1.4.1.39003.5.2.9 |
sub10RadioMgmtStats1dPersistIf set to 'stateEnabled(1) the sub10RadioStats1dHistTable objects are stored and read in on startup. This makes the history non-volatile across unit resets.rw Sub10State .1.3.6.1.4.1.39003.5.2.9.1 |
sub10RadioMgmtStatsActiveTableThis table maintains an entry for each Radio statistic that is enabled and active. SEQUENCE OF Sub10RadioMgmtStatsActiveEntry .1.3.6.1.4.1.39003.5.2.9.4 |
sub10RadioMgmtStatsActiveEntryAn entry in the sub10RadioMgmtStatsActiveTable. Each entry represents an object instance of Radio stats and it's current state. Sub10RadioMgmtStatsActiveEntry .1.3.6.1.4.1.39003.5.2.9.4.1 |
sub10RadioMgmtStatsActiveIndexThe number of Radio stats objects used as an index to this table. Unsigned32 .1.3.6.1.4.1.39003.5.2.9.4.1.1 |
sub10RadioMgmtStatsActiveNameThe stats object name. This is the name of the ethernet stats object in the sub10RadioStatsCurrent group.ro OCTET STRING .1.3.6.1.4.1.39003.5.2.9.4.1.2 |
sub10RadioMgmtStatsActiveStateIf set to 'enabled' the statistic is active.rw Sub10State .1.3.6.1.4.1.39003.5.2.9.4.1.3 |
sub10RadioMgmtDataRateThe maximum data rate of the Airside interface up to the licensed value.rw Sub10RadioDataRate .1.3.6.1.4.1.39003.5.2.10 |
sub10RadioStats OBJECT IDENTIFIER .1.3.6.1.4.1.39003.5.3 |
sub10RadioStatsTimeElapsedThe time that has elapsed from the beginning of the statistical measurement period. This is normally time from just after the last reboot time when the statistics module begins it's calculations. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.1 |
sub10RadioStatsCurrent OBJECT IDENTIFIER .1.3.6.1.4.1.39003.5.3.2 |
sub10RadioStatsCurrTxPowerMinThe minimum value that the transmit power of the local radio link measured over the previous rolling 60 seconds.ro Integer32(-100..100) UNITS "dBm" .1.3.6.1.4.1.39003.5.3.2.1 |
sub10RadioStatsCurrTxPowerMaxThe maximum value that the transmit power of the local radio link measured over the previous rolling 60 seconds.ro Integer32(-100..100) UNITS "dBm" .1.3.6.1.4.1.39003.5.3.2.2 |
sub10RadioStatsCurrTxPowerAvgThe average value of the transmit power of the local radio link measured over the previous rolling 60 seconds.ro Integer32(-100..100) UNITS "dBm" .1.3.6.1.4.1.39003.5.3.2.3 |
sub10RadioStatsCurrRxPowerMinThe minimum value that the receive power of the local radio link measured over the previous rolling 60 seconds.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.2.4 |
sub10RadioStatsCurrRxPowerMaxThe maximum value that the receive power of the local radio link measured over the previous rolling 60 seconds.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.2.5 |
sub10RadioStatsCurrRxPowerAvgThe average value of the receive power of the local radio link measured over the previous rolling 60 seconds.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.2.6 |
sub10RadioStatsCurrVectErrMinThe minimum value that the vector error of the local radio link measured over the previous rolling 60 seconds.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.2.7 |
sub10RadioStatsCurrVectErrMaxThe maximum value that the vector error of the local radio link measured over the previous rolling 60 seconds.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.2.8 |
sub10RadioStatsCurrVectErrAvgThe average value of the vector error of the local radio link measured over the previous rolling 60 seconds.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.2.9 |
sub10RadioStatsCurrLnkLossMinThe minimum value that the link loss of the local radio link measured over the previous rolling 60 seconds.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.2.10 |
sub10RadioStatsCurrLnkLossMaxThe maximum value that the link loss of the local radio link measured over the previous rolling 60 seconds.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.2.11 |
sub10RadioStatsCurrLnkLossAvgThe average value of the link loss of the local radio link measured over the previous rolling 60 seconds.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.2.12 |
sub10RadioStatsCurrRxFrmsThe number of Airside frames received over the Radio interface. This is irrespective of whether the Airside frame transmitted contained any ethernet data. Set to zero on unit reset.ro Counter64 .1.3.6.1.4.1.39003.5.3.2.13 |
sub10RadioStatsCurrTxFrmsThe number of Airside frames transmitted over the Radio interface. This is irrespective of whether the Airside frame transmitted contained any ethernet data. Set to zero on unit reset.ro Counter64 .1.3.6.1.4.1.39003.5.3.2.14 |
sub10RadioStatsCurrRxPktsThe number of Ethernet packets received over the Radio interface. This includes all packets whether destined for the management sub-system on this unit or to be sent direct to the Ethernet interface. Set to zero on unit reset.ro Counter64 .1.3.6.1.4.1.39003.5.3.2.15 |
sub10RadioStatsCurrTxPktsThe number of Ethernet packets transmitted over the Radio interface which originated from the Ethernet interface. This does not include packets originating from the management sub-system. Set to zero on unit reset.ro Counter64 .1.3.6.1.4.1.39003.5.3.2.16 |
sub10RadioStatsCurrRxMgmtPktsThe number of Ethernet packets received over the Radio interface and which are destined for the management sub-system on this unit. Set to zero on unit reset.ro Counter64 .1.3.6.1.4.1.39003.5.3.2.17 |
sub10RadioStatsCurrTxMgmtPktsThe number of Ethernet packets transmitted over the Radio interface which originated from the management sub-system. This does not include packets originating from the Ethernet interface. Set to zero on unit reset.ro Counter64 .1.3.6.1.4.1.39003.5.3.2.18 |
sub10RadioStatsCurrRxBadFrmsThe count of bad frames detected on the receive side of the Radio interface. A bad frame could be caused by any one of the following detected errors: UFEC Error Header CRC Error Frame CRC Error Bad header Set to zero on unit reset.ro Counter64 .1.3.6.1.4.1.39003.5.3.2.19 |
sub10RadioStatsCurrMWUTempMinThe minimum MWU temperature measured over the previous rolling 60 seconds.ro Integer32(-100..100) .1.3.6.1.4.1.39003.5.3.2.24 |
sub10RadioStatsCurrMWUTempMaxThe maximum MWU temperature measured over the previous rolling 60 seconds.ro Integer32(-100..100) .1.3.6.1.4.1.39003.5.3.2.25 |
sub10RadioStatsCurrMWUTempAvgThe average MWU temperature measured over the previous rolling 60 seconds.ro Integer32(-100..100) .1.3.6.1.4.1.39003.5.3.2.26 |
sub10RadioStatsCurrQPSKTo8PSKThe number transitions of Modulation Mode configuration from QPSK to 8PSK since unit reboot.ro Counter32 .1.3.6.1.4.1.39003.5.3.2.27 |
sub10RadioStatsCurr8PSKToQPSKThe number transitions of Modulation Mode configuration from 8PSK to QPSK since unit reboot.ro Counter32 .1.3.6.1.4.1.39003.5.3.2.28 |
sub10RadioStatsCurrAFERMinThe minimum AFER (Air Frame Error Ratio) in the previous rolling 60 seconds. See sub10RadioLclAFER.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.2.29 |
sub10RadioStatsCurrAFERMaxThe maximum AFER (Air Frame Error Ratio) in the previous rolling 60 seconds. See sub10RadioLclAFER.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.2.30 |
sub10RadioStatsCurrAFERAvgThe average AFER (Air Frame Error Ratio) in the previous rolling 60 seconds. See sub10RadioLclAFER.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.2.31 |
sub10RadioStatsCurrRmtTxPowerAvgThe average value of the transmit power of the remote radio link measured over the previous rolling 60 seconds.ro Integer32(-100..100) UNITS "dBm" .1.3.6.1.4.1.39003.5.3.2.32 |
sub10RadioStatsCurrRmtRxPowerAvgThe average value of the receive power of the remote radio link measured over the previous rolling 60 seconds.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.2.33 |
sub10RadioStatsCurrRmtVectErrAvgThe average value of the vector error of the remote radio link measured over the previous rolling 60 seconds.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.2.34 |
sub10RadioStatsCurrRmtLnkLossAvgThe average value of the link loss of the remote radio link measured over the previous rolling 60 seconds.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.2.35 |
sub10RadioStatsCurrRmtMWUTempAvgThe average MWU temperature of the remote unit measured over the previous rolling 60 seconds.ro Integer32(-100..100) .1.3.6.1.4.1.39003.5.3.2.36 |
sub10RadioStatsCurrRmtAFERAvgThe average AFER (Air Frame Error Ratio) of the remote unit in the previous rolling 60 seconds.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.2.37 |
sub10RadioStatsCurrRxQPSKThe time in seconds that Rx modulation mode has been in QPSK since last reboot.ro Counter64 .1.3.6.1.4.1.39003.5.3.2.38 |
sub10RadioStatsCurrRx8PSKThe time in seconds that Rx modulation mode has been in 8PSK since last reboot.ro Counter64 .1.3.6.1.4.1.39003.5.3.2.39 |
sub10RadioStatsCurrTxQPSKThe time in seconds that Txmodulation mode has been in QPSK since last reboot.ro Counter64 .1.3.6.1.4.1.39003.5.3.2.40 |
sub10RadioStatsCurrTx8PSKThe time in seconds that Tx modulation mode has been in 8PSK since last reboot.ro Counter64 .1.3.6.1.4.1.39003.5.3.2.41 |
sub10RadioStatsHistory OBJECT IDENTIFIER .1.3.6.1.4.1.39003.5.3.3 |
sub10RadioStats1mHistory OBJECT IDENTIFIER .1.3.6.1.4.1.39003.5.3.3.1 |
sub10RadioStats1mHistIntvlsThe number of valid table entries in sub10RadioStats1mHistTable on this system. There is one entry per 1 minute interval. If the unit has been running for a minimum of 15 minutes and collecting valid data then the number of entries will be 15, this represents a total maximum of 5 minutes worth of data.ro Unsigned32 .1.3.6.1.4.1.39003.5.3.3.1.1 |
sub10RadioStats1mHistTableThis table maintains a history of Radio statistics based on 1 minute intervals. There are a maximum of 60 intervals which represent 1 hour of data. This table along with the 15m and 1d tables provide a history of the performance of the radio interface. This information may then be post processed and used as a troubleshooting tool. An entry in the table represents a 1 minute interval where each interval is synchronised to the clock on the hour. There are up to 60 intervals starting at 1. The number of valid entries in the table is given by the value of sub10RadioStats1mHistIntvls of which the minimum is 0 and the maximum is 60 therefore providing up to a maximum of 60 minutes of 1 minute interval data. The first entry indexed by 1 represents the most recent completed 1 minute interval. At the end of each interval all entries of 'index' are copied into entry 'index+1'. If the number of valid intervals is at least 15 then these 15 intervals are summarised into 15 minutes stats. At the end of a 60 minute period the least recent interval is discarded to accomodate the next minute interval. SEQUENCE OF Sub10RadioStats1mHistEntry .1.3.6.1.4.1.39003.5.3.3.1.2 |
sub10RadioStats1mHistEntryAn entry in the sub10RadioStats1mHistTable. Each entry represents 1 minute of performance management data where the first entry with index=1 is the most recent 1 minute interval and the last entry with index=n (up to 60) is the least recent 1 minute interval. The number of valid intervals is given by the value of sub10RadioStats1mHistIntvls. Sub10RadioStats1mHistEntry .1.3.6.1.4.1.39003.5.3.3.1.2.1 |
sub10RadioStats1mHistIntvlThe interval number used as an index to this table. Interval numbers start at 1 (the most recent 1 minute interval) and have a maximum value of 60 (the least recent 1 minute interval). Unsigned32 .1.3.6.1.4.1.39003.5.3.3.1.2.1.1 |
sub10RadioStats1mHistTimeThe local system time when this 1m history entry was created. This represents the end of the 1 minute interval for which the associated stats with the same sub10RadioStats1mHistIntvl table index are relevant.ro Sub10DateTime .1.3.6.1.4.1.39003.5.3.3.1.2.1.2 |
sub10RadioStats1mHistTxPowerMinThe minimum value that the transmit power of the local radio link has reached in this minute interval, measured in dBm.ro Integer32(-100..100) UNITS "dBm" .1.3.6.1.4.1.39003.5.3.3.1.2.1.3 |
sub10RadioStats1mHistTxPowerMaxThe maximum value that the transmit power of the local radio link has reached in this minute interval, measured in dBm.ro Integer32(-100..100) UNITS "dBm" .1.3.6.1.4.1.39003.5.3.3.1.2.1.4 |
sub10RadioStats1mHistTxPowerAvgThe average value that the transmit power of the local radio link has reached in this minute interval, measured in dBm.ro Integer32(-100..100) UNITS "dBm" .1.3.6.1.4.1.39003.5.3.3.1.2.1.5 |
sub10RadioStats1mHistRxPowerMinThe minimum value that the receive power of the local radio link has reached in this minute interval, measured in dBm.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.1.2.1.6 |
sub10RadioStats1mHistRxPowerMaxThe maximum value that the receive power of the local radio link has reached in this minute interval, measured in dBm.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.1.2.1.7 |
sub10RadioStats1mHistRxPowerAvgThe average value that the receive power of the local radio link has reached in this minute interval, measured in dBm.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.1.2.1.8 |
sub10RadioStats1mHistVectErrMinThe minimum value that the vector error of the local radio link has reached in this minute interval, measured in dB.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.1.2.1.9 |
sub10RadioStats1mHistVectErrMaxThe maximum value that the vector error of the local radio link has reached in this minute interval, measured in dB.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.1.2.1.10 |
sub10RadioStats1mHistVectErrAvgThe average value that the vector error of the local radio link has reached in this minute interval, measured in dB.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.1.2.1.11 |
sub10RadioStats1mHistLnkLossMinThe minimum value that the link loss of the local radio link has reached in this minute interval, measured in dB.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.1.2.1.12 |
sub10RadioStats1mHistLnkLossMaxThe maximum value that the link loss of the local radio link has reached in this minute interval, measured in dB.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.1.2.1.13 |
sub10RadioStats1mHistLnkLossAvgThe average value that the link loss of the local radio link has reached in this minute interval, measured in dB.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.1.2.1.14 |
sub10RadioStats1mHistMWUTempMinThe minimum MWU temperature measured in this minute interval.ro Integer32(-100..100) .1.3.6.1.4.1.39003.5.3.3.1.2.1.15 |
sub10RadioStats1mHistMWUTempMaxThe maximum MWU temperature measured in this minute interval.ro Integer32(-100..100) .1.3.6.1.4.1.39003.5.3.3.1.2.1.16 |
sub10RadioStats1mHistMWUTempAvgThe average MWU temperature measured in this minute interval.ro Integer32(-100..100) .1.3.6.1.4.1.39003.5.3.3.1.2.1.17 |
sub10RadioStats1mHistRxFrmsThe number of Airside frames received over the Radio interface in this minute. This is irrespective of whether the Airside frame transmitted contained any ethernet data.ro Counter64 .1.3.6.1.4.1.39003.5.3.3.1.2.1.22 |
sub10RadioStats1mHistTxFrmsThe number of Airside frames transmitted over the Radio interface in this minute. This is irrespective of whether the Airside frame transmitted contained any ethernet data.ro Counter64 .1.3.6.1.4.1.39003.5.3.3.1.2.1.23 |
sub10RadioStats1mHistRxPktsThe number of Ethernet packets received over the Radio interface in this minute. This includes all packets whether destined for the management sub-system on this unit or to be sent direct to the Ethernet interface.ro Counter64 .1.3.6.1.4.1.39003.5.3.3.1.2.1.24 |
sub10RadioStats1mHistTxPktsThe number of Ethernet packets transmitted over the Radio interface which originated from the Ethernet interface in this minute. This does not include packets originating from the management sub-system.ro Counter64 .1.3.6.1.4.1.39003.5.3.3.1.2.1.25 |
sub10RadioStats1mHistRxMgmtPktsThe number of Ethernet packets received over the Radio interface in this minute and which are destined for the management sub-system on this unit.ro Counter64 .1.3.6.1.4.1.39003.5.3.3.1.2.1.26 |
sub10RadioStats1mHistTxMgmtPktsThe number of Ethernet packets transmitted over the Radio interface which originated from the management sub-system in this minute. This does not include packets originating from the Ethernet interface.ro Counter64 .1.3.6.1.4.1.39003.5.3.3.1.2.1.27 |
sub10RadioStats1mHistRxBadFrmsThe count of bad frames detected on the receive side of the Radio interface in this minute.ro Counter64 .1.3.6.1.4.1.39003.5.3.3.1.2.1.28 |
sub10RadioStats1mHistQPSKTo8PSKThe number transitions of Modulation Mode configuration from QPSK to 8PSK in this 1 minute interval.ro Counter32 .1.3.6.1.4.1.39003.5.3.3.1.2.1.29 |
sub10RadioStats1mHist8PSKToQPSKThe number transitions of Modulation Mode configuration from 8PSK to QPSK in this 1 minute interval.ro Counter32 .1.3.6.1.4.1.39003.5.3.3.1.2.1.30 |
sub10RadioStats1mHistAFERMinThe minimum AFER (Air Frame Error Ratio) in this minute. See sub10RadioLclAFER.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.1.2.1.31 |
sub10RadioStats1mHistAFERMaxThe maximum AFER (Air Frame Error Ratio) in this minute. See sub10RadioLclAFER.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.1.2.1.32 |
sub10RadioStats1mHistAFERAvgThe average AFER (Air Frame Error Ratio) in this minute. See sub10RadioLclAFER.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.1.2.1.33 |
sub10RadioStats1mHistRxQPSKThe time in seconds that the Rx Modulation Mode was QPSK in this 1 minute interval.ro Counter32 .1.3.6.1.4.1.39003.5.3.3.1.2.1.34 |
sub10RadioStats1mHistRx8PSKThe time in seconds that the Rx Modulation Mode was 8PSK in this 1 minute interval.ro Counter32 .1.3.6.1.4.1.39003.5.3.3.1.2.1.35 |
sub10RadioStats1mHistTxQPSKThe time in seconds that the Tx Modulation Mode was QPSK in this 1 minute interval.ro Counter32 .1.3.6.1.4.1.39003.5.3.3.1.2.1.36 |
sub10RadioStats1mHistTx8PSKThe time in seconds that the Tx Modulation Mode was 8PSK in this 1 minute interval.ro Counter32 .1.3.6.1.4.1.39003.5.3.3.1.2.1.37 |
sub10RadioStats15mHistory OBJECT IDENTIFIER .1.3.6.1.4.1.39003.5.3.3.2 |
sub10RadioStats15mHistIntvlsThe number of valid table entries in sub10RadioStats15mHistTable on this system. There is one entry per 15 minute interval. If the unit has been running for a minimum of 24 hours and collecting valid data then the number of entries will be 96, this represents a total maximum of 24 hours worth of data.ro Unsigned32 .1.3.6.1.4.1.39003.5.3.3.2.1 |
sub10RadioStats15mHistTableThis table maintains a history of Radio statistics based on 15 minute intervals. There are a maximum of 96 intervals which represent 24 hours of data. This table along with the 1m and 1d tables provide a history of the performance of the radio interface. This information may then be post processed and used as a troubleshooting tool. An entry in the table represents a 15 minute interval where each interval is synchronised to the clock on the hour. There are up to 96 intervals starting at 1. The number of valid entries in the table is given by the value of sub10RadioStats15mHistIntvls of which the minimum is 0 and the maximum is 96 therefore providing up to a maximum of 24 hours of 15 minute interval data. The first entry indexed by 1 represents the most recent completed 15 minute interval. At the end of each interval all entries of 'index' are copied into entry 'index+1'. If the number of valid intervals is 96 then the least recent interval entry is summarised into 24 hour stats and then discarded. SEQUENCE OF Sub10RadioStats15mHistEntry .1.3.6.1.4.1.39003.5.3.3.2.2 |
sub10RadioStats15mHistEntryAn entry in the sub10RadioStats15mHistTable. Each entry represents 15 minutes performance management data where the first entry with index=1 is the most recent 15 minute interval and the last entry with index=n (up to 96) is the least recent 15 minute interval. The number of valid intervals is sub10RadioStats15mHistIntvls. Sub10RadioStats15mHistEntry .1.3.6.1.4.1.39003.5.3.3.2.2.1 |
sub10RadioStats15mHistIntvlThe interval number used as an index to this table. Interval numbers start at 1 (the most recent 15 minute interval) and have a maximum value of 96 (the least recent 15 minute interval). Unsigned32 .1.3.6.1.4.1.39003.5.3.3.2.2.1.1 |
sub10RadioStats15mHistTimeThe local system time when this 15m history entry was created. This represents the end of the 15 minute interval for which the associated stats with the same sub10RadioStats15mHistIntvl table index are relevant.ro Sub10DateTime .1.3.6.1.4.1.39003.5.3.3.2.2.1.2 |
sub10RadioStats15mHistTxPowerMinThe minimum value that the transmit power of the local radio link has reached in this 15 minute interval, measured in dBm.ro Integer32(-100..100) UNITS "dBm" .1.3.6.1.4.1.39003.5.3.3.2.2.1.3 |
sub10RadioStats15mHistTxPowerMaxThe maximum value that the transmit power of the local radio link has reached in this 15 minute interval, measured in dBm.ro Integer32(-100..100) UNITS "dBm" .1.3.6.1.4.1.39003.5.3.3.2.2.1.4 |
sub10RadioStats15mHistTxPowerAvgThe average value that the transmit power of the local radio link has reached in this 15 minute interval, measured in dBm.ro Integer32(-100..100) UNITS "dBm" .1.3.6.1.4.1.39003.5.3.3.2.2.1.5 |
sub10RadioStats15mHistRxPowerMinThe minimum value that the receive power of the local radio link has reached in this 15 minute interval, measured in dBm.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.2.2.1.6 |
sub10RadioStats15mHistRxPowerMaxThe maximum value that the receive power of the local radio link has reached in this 15 minute interval, measured in dBm.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.2.2.1.7 |
sub10RadioStats15mHistRxPowerAvgThe average value that the receive power of the local radio link has reached in this 15 minute interval, measured in dBm.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.2.2.1.8 |
sub10RadioStats15mHistVectErrMinThe minimum value that the vector error of the local radio link has reached in this 15 minute interval, measured in dB.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.2.2.1.9 |
sub10RadioStats15mHistVectErrMaxThe maximum value that the vector error of the local radio link has reached in this 15 minute interval, measured in dB.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.2.2.1.10 |
sub10RadioStats15mHistVectErrAvgThe average value that the vector error of the local radio link has reached in this 15 minute interval, measured in dB.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.2.2.1.11 |
sub10RadioStats15mHistLnkLossMinThe minimum value that the link loss of the local radio link has reached in this 15 minute interval, measured in dB.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.2.2.1.12 |
sub10RadioStats15mHistLnkLossMaxThe maximum value that the link loss of the local radio link has reached in this 15 minute interval, measured in dB.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.2.2.1.13 |
sub10RadioStats15mHistLnkLossAvgThe average value that the link loss of the local radio link has reached in this 15 minute interval, measured in dB.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.2.2.1.14 |
sub10RadioStats15mHistMWUTempMinThe minimum MWU temperature measured in this 15 minute interval.ro Integer32(-100..100) .1.3.6.1.4.1.39003.5.3.3.2.2.1.15 |
sub10RadioStats15mHistMWUTempMaxThe maximum MWU temperature measured in this 15 minute interval.ro Integer32(-100..100) .1.3.6.1.4.1.39003.5.3.3.2.2.1.16 |
sub10RadioStats15mHistMWUTempAvgThe average MWU temperature measured in this 15 minute interval.ro Integer32(-100..100) .1.3.6.1.4.1.39003.5.3.3.2.2.1.17 |
sub10RadioStats15mHistRxFrmsThe number of Airside frames received over the Radio interface in this 15 minutes. This is irrespective of whether the Airside frame transmitted contained any ethernet data.ro Counter64 .1.3.6.1.4.1.39003.5.3.3.2.2.1.22 |
sub10RadioStats15mHistTxFrmsThe number of Airside frames transmitted over the Radio interface in this 15 minutes. This is irrespective of whether the Airside frame transmitted contained any ethernet data.ro Counter64 .1.3.6.1.4.1.39003.5.3.3.2.2.1.23 |
sub10RadioStats15mHistRxPktsThe number of Ethernet packets received over the Radio interface in this 15 minutes. This includes all packets whether destined for the management sub-system on this unit or to be sent direct to the Ethernet interface.ro Counter64 .1.3.6.1.4.1.39003.5.3.3.2.2.1.24 |
sub10RadioStats15mHistTxPktsThe number of Ethernet packets transmitted over the Radio interface which originated from the Ethernet interface in this 15 minutes. This does not include packets originating from the management sub-system.ro Counter64 .1.3.6.1.4.1.39003.5.3.3.2.2.1.25 |
sub10RadioStats15mHistRxMgmtPktsThe number of Ethernet packets received over the Radio interface in this 15 minutes and which are destined for the management sub-system on this unit.ro Counter64 .1.3.6.1.4.1.39003.5.3.3.2.2.1.26 |
sub10RadioStats15mHistTxMgmtPktsThe number of Ethernet packets transmitted over the Radio interface which originated from the management sub-system in this 15 minutes. This does not include packets originating from the Ethernet interface.ro Counter64 .1.3.6.1.4.1.39003.5.3.3.2.2.1.27 |
sub10RadioStats15mHistRxBadFrmsThe count of bad frames detected on the receive side of the Radio interface in this 15 minutes.ro Counter64 .1.3.6.1.4.1.39003.5.3.3.2.2.1.28 |
sub10RadioStats15mHistQPSKTo8PSKThe number transitions of Modulation Mode configuration from QPSK to 8PSK in this 15 minute interval.ro Counter32 .1.3.6.1.4.1.39003.5.3.3.2.2.1.29 |
sub10RadioStats15mHist8PSKToQPSKThe number transitions of Modulation Mode configuration from 8PSK to QPSK in this 15 minute interval.ro Counter32 .1.3.6.1.4.1.39003.5.3.3.2.2.1.30 |
sub10RadioStats15mHistAFERMinThe minimum AFER (Air Frame Error Ratio) in this 15 minute interval. See sub10RadioLclAFER.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.2.2.1.31 |
sub10RadioStats15mHistAFERMaxThe maximum AFER (Air Frame Error Ratio) in this 15 minute interval. See sub10RadioLclAFER.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.2.2.1.32 |
sub10RadioStats15mHistAFERAvgThe average AFER (Air Frame Error Ratio) in this 15 minute interval. See sub10RadioLclAFER.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.2.2.1.33 |
sub10RadioStats15mHistRxQPSKThe time in seconds that the Rx Modulation Mode was QPSK in this 15 minute interval.ro Counter32 .1.3.6.1.4.1.39003.5.3.3.2.2.1.34 |
sub10RadioStats15mHistRx8PSKThe time in seconds that the Rx Modulation Mode was 8PSK in this 15 minute interval.ro Counter32 .1.3.6.1.4.1.39003.5.3.3.2.2.1.35 |
sub10RadioStats15mHistTxQPSKThe time in seconds that the Tx Modulation Mode was QPSK in this 15 minute interval.ro Counter32 .1.3.6.1.4.1.39003.5.3.3.2.2.1.36 |
sub10RadioStats15mHistTx8PSKThe time in seconds that the Tx Modulation Mode was 8PSK in this 15 minute interval.ro Counter32 .1.3.6.1.4.1.39003.5.3.3.2.2.1.37 |
sub10RadioStats1dHistory OBJECT IDENTIFIER .1.3.6.1.4.1.39003.5.3.3.3 |
sub10RadioStats1dHistIntvlsThe number of valid table entries in sub10RadioStats1dHistTable on this system. There is one entry per 1 day interval. If the unit has been running for a minimum of 30 days and collecting valid data then the number of entries will be 30, this represents a total maximum of 30 days worth of data.ro Unsigned32 .1.3.6.1.4.1.39003.5.3.3.3.1 |
sub10RadioStats1dHistTableThis table maintains a history of Radio statistics based on 1 day intervals. There are a maximum of 30 intervals which represent 30 days of data. This table along with the 1m and 15m tables provide a history of the performance of the radio interface. This information may then be post processed and used as a troubleshooting tool. An entry in the table represents a 1 day interval where each interval is synchronised to the clock on the hour. There are up to 30 intervals starting at 1. The number of valid entries in the table is given by the value of sub10RadioStats1dHistIntvls of which the minimum is 0 and the maximum is 30 therefore providing up to a maximum of 30 days of 1 day interval data. The first entry indexed by 1 represents the most recent completed 1 day interval. At the end of each interval all entries of 'index' are copied into entry 'index+1'. If the number of valid intervals is 30 then the least recent interval entry is discarded. SEQUENCE OF Sub10RadioStats1dHistEntry .1.3.6.1.4.1.39003.5.3.3.3.2 |
sub10RadioStats1dHistEntryAn entry in the sub10RadioStats1dHistTable. Each entry represents 1 day of performance management data where the first entry with index=1 is the most recent 1 day interval and the last entry with index=n (up to 30) is the least recent 1 day interval. The number of valid intervals is given by the value of sub10RadioStats1dHistIntvls. Sub10RadioStats1dHistEntry .1.3.6.1.4.1.39003.5.3.3.3.2.1 |
sub10RadioStats1dHistIntvlThe interval number used as an index to this table. Interval numbers start at 1 (the most recent 1 day interval) and have a maximum value of 24 (the least recent 1 day interval). Unsigned32 .1.3.6.1.4.1.39003.5.3.3.3.2.1.1 |
sub10RadioStats1dHistTimeThe local system time when this 1d history entry was created. This represents the end of the 1 day interval for which the associated stats with the same sub10RadioStats1dHistIntvl table index are relevant.ro Sub10DateTime .1.3.6.1.4.1.39003.5.3.3.3.2.1.2 |
sub10RadioStats1dHistTxPowerMinThe minimum value that the transmit power of the local radio link has reached in this day interval, measured in dBm.ro Integer32(-100..100) UNITS "dBm" .1.3.6.1.4.1.39003.5.3.3.3.2.1.3 |
sub10RadioStats1dHistTxPowerMaxThe maximum value that the transmit power of the local radio link has reached in this day interval, measured in dBm.ro Integer32(-100..100) UNITS "dBm" .1.3.6.1.4.1.39003.5.3.3.3.2.1.4 |
sub10RadioStats1dHistTxPowerAvgThe average value that the transmit power of the local radio link has reached in this day interval, measured in dBm.ro Integer32(-100..100) UNITS "dBm" .1.3.6.1.4.1.39003.5.3.3.3.2.1.5 |
sub10RadioStats1dHistRxPowerMinThe minimum value that the receive power of the local radio link has reached in this day interval, measured in dBm.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.3.2.1.6 |
sub10RadioStats1dHistRxPowerMaxThe maximum value that the receive power of the local radio link has reached in this day interval, measured in dBm.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.3.2.1.7 |
sub10RadioStats1dHistRxPowerAvgThe average value that the receive power of the local radio link has reached in this day interval, measured in dBm.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.3.2.1.8 |
sub10RadioStats1dHistVectErrMinThe minimum value that the vector error of the local radio link has reached in this day interval, measured in dB.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.3.2.1.9 |
sub10RadioStats1dHistVectErrMaxThe maximum value that the vector error of the local radio link has reached in this day interval, measured in dB.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.3.2.1.10 |
sub10RadioStats1dHistVectErrAvgThe average value that the vector error of the local radio link has reached in this day interval, measured in dB.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.3.2.1.11 |
sub10RadioStats1dHistLnkLossMinThe minimum value that the link loss of the local radio link has reached in this day interval, measured in dB.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.3.2.1.12 |
sub10RadioStats1dHistLnkLossMaxThe maximum value that the link loss of the local radio link has reached in this day interval, measured in dB.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.3.2.1.13 |
sub10RadioStats1dHistLnkLossAvgThe average value that the link loss of the local radio link has reached in this day interval, measured in dB.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.3.2.1.14 |
sub10RadioStats1dHistMWUTempMinThe minimum MWU temperature measured in this day interval.ro Integer32(-100..100) .1.3.6.1.4.1.39003.5.3.3.3.2.1.15 |
sub10RadioStats1dHistMWUTempMaxThe maximum MWU temperature measured in this day interval.ro Integer32(-100..100) .1.3.6.1.4.1.39003.5.3.3.3.2.1.16 |
sub10RadioStats1dHistMWUTempAvgThe average MWU temperature measured in this day interval.ro Integer32(-100..100) .1.3.6.1.4.1.39003.5.3.3.3.2.1.17 |
sub10RadioStats1dHistRxFrmsThe number of Airside frames received over the Radio interface in this day interval. This is irrespective of whether the Airside frame transmitted contained any ethernet data.ro Counter64 .1.3.6.1.4.1.39003.5.3.3.3.2.1.22 |
sub10RadioStats1dHistTxFrmsThe number of Airside frames transmitted over the Radio interface in this day interval. This is irrespective of whether the Airside frame transmitted contained any ethernet data.ro Counter64 .1.3.6.1.4.1.39003.5.3.3.3.2.1.23 |
sub10RadioStats1dHistRxPktsThe number of Ethernet packets received over the Radio interface in this day interval. This includes all packets whether destined for the management sub-system on this unit or to be sent direct to the Ethernet interface.ro Counter64 .1.3.6.1.4.1.39003.5.3.3.3.2.1.24 |
sub10RadioStats1dHistTxPktsThe number of Ethernet packets transmitted over the Radio interface which originated from the Ethernet interface in this day interval. This does not include packets originating from the management sub-system.ro Counter64 .1.3.6.1.4.1.39003.5.3.3.3.2.1.25 |
sub10RadioStats1dHistRxMgmtPktsThe number of Ethernet packets received over the Radio interface in this day interval and which are destined for the management sub-system on this unit.ro Counter64 .1.3.6.1.4.1.39003.5.3.3.3.2.1.26 |
sub10RadioStats1dHistTxMgmtPktsThe number of Ethernet packets transmitted over the Radio interface which originated from the management sub-system in this day interval. This does not include packets originating from the Ethernet interface.ro Counter64 .1.3.6.1.4.1.39003.5.3.3.3.2.1.27 |
sub10RadioStats1dHistRxBadFrmsThe count of bad frames detected on the receive side of the Radio interface in this day interval.ro Counter64 .1.3.6.1.4.1.39003.5.3.3.3.2.1.28 |
sub10RadioStats1dHistQPSKTo8PSKThe number transitions of Modulation Mode configuration from QPSK to 8PSK in this 1 day interval.ro Counter64 .1.3.6.1.4.1.39003.5.3.3.3.2.1.29 |
sub10RadioStats1dHist8PSKToQPSKThe number transitions of Modulation Mode configuration from 8PSK to QPSK in this 1 day interval.ro Counter64 .1.3.6.1.4.1.39003.5.3.3.3.2.1.30 |
sub10RadioStats1dHistAFERMinThe minimum AFER (Air Frame Error Ratio) in this 1 day interval. See sub10RadioLclAFER.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.3.2.1.31 |
sub10RadioStats1dHistAFERMaxThe maximum AFER (Air Frame Error Ratio) in this 1 day interval. See sub10RadioLclAFER.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.3.2.1.32 |
sub10RadioStats1dHistAFERAvgThe average AFER (Air Frame Error Ratio) in this 1 day interval. See sub10RadioLclAFER.ro OCTET STRING .1.3.6.1.4.1.39003.5.3.3.3.2.1.33 |
sub10RadioStats1dHistRxQPSKThe time in seconds that the Rx Modulation Mode was QPSK in this 1 day interval.ro Counter32 .1.3.6.1.4.1.39003.5.3.3.3.2.1.34 |
sub10RadioStats1dHistRx8PSKThe time in seconds that the Rx Modulation Mode was 8PSK in this 1 day interval.ro Counter32 .1.3.6.1.4.1.39003.5.3.3.3.2.1.35 |
sub10RadioStats1dHistTxQPSKThe time in seconds that the Tx Modulation Mode was QPSK in this 1 day interval.ro Counter32 .1.3.6.1.4.1.39003.5.3.3.3.2.1.36 |
sub10RadioStats1dHistTx8PSKThe time in seconds that the Tx Modulation Mode was 8PSK in this 1 day interval.ro Counter32 .1.3.6.1.4.1.39003.5.3.3.3.2.1.37 |
sub10MIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.39003.20 |
sub10MIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.39003.20.1 |
sub10ComplianceThe compliance statement for Sub10 entities which implement the SUB10SYSTEMS-MIB. Unknown .1.3.6.1.4.1.39003.20.1.1 |
sub10MIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.39003.20.2 |
sub10NotificationsGrpThis group defines objects that are members of the sub10NotificationsGrp group Unknown .1.3.6.1.4.1.39003.20.2.1 |
sub10UnitLocalStatusGrpThis group defines objects that are members of the sub10UnitLocalStatusGrp group Unknown .1.3.6.1.4.1.39003.20.2.2 |
sub10UnitLclAlarmStateEntryGrpThis group defines objects that are members of the sub10UnitLclAlarmStateEntryGrp group Unknown .1.3.6.1.4.1.39003.20.2.3 |
sub10UnitRemoteStatusGrpThis group defines objects that are members of the sub10UnitRemoteStatusGrp group Unknown .1.3.6.1.4.1.39003.20.2.4 |
sub10UnitMgmtSystemGrpThis group defines objects that are members of the sub10UnitMgmtSystemGrp group Unknown .1.3.6.1.4.1.39003.20.2.5 |
sub10UnitMgmtIpGrpThis group defines objects that are members of the sub10UnitMgmtIpGrp group Unknown .1.3.6.1.4.1.39003.20.2.6 |
sub10UnitMgmtVlanGrpThis group defines objects that are members of the sub10UnitMgmtVlanGrp group Unknown .1.3.6.1.4.1.39003.20.2.7 |
sub10UnitMgmtUsersGrpThis group defines objects that are members of the sub10UnitMgmtUsersGrp group Unknown .1.3.6.1.4.1.39003.20.2.8 |
sub10UnitMgmtUserEntryGrpThis group defines objects that are members of the sub10UnitMgmtUserEntryGrp group Unknown .1.3.6.1.4.1.39003.20.2.9 |
sub10UnitMgmtTimeGrpThis group defines objects that are members of the sub10UnitMgmtTimeGrp group Unknown .1.3.6.1.4.1.39003.20.2.10 |
sub10UnitMgmtAlarmEntryGrpThis group defines objects that are members of the sub10UnitMgmtAlarmEntryGrp group Unknown .1.3.6.1.4.1.39003.20.2.11 |
sub10UnitMgmtAlarmsGrpThis group defines objects that are members of the sub10UnitMgmtAlarmsGrp group Unknown .1.3.6.1.4.1.39003.20.2.12 |
sub10UnitMgmtSnmpGrpThis group defines objects that are members of the sub10UnitMgmtSnmpGrp group Unknown .1.3.6.1.4.1.39003.20.2.13 |
sub10UnitMgmtSnmpTrpDstEntryGrpThis group defines objects that are members of the sub10UnitMgmtSnmpTrpDstEntryGrp group Unknown .1.3.6.1.4.1.39003.20.2.14 |
sub10UnitMgmtSnmpUserEntryGrpThis group defines objects that are members of the sub10UnitMgmtSnmpUserEntryGrp group Unknown .1.3.6.1.4.1.39003.20.2.15 |
sub10UnitMgmtSnmpAccessEntryGrpThis group defines objects that are members of the sub10UnitMgmtSnmpAccessEntryGrp group Unknown .1.3.6.1.4.1.39003.20.2.16 |
sub10UnitMgmtSnmpTargetEntryGrpThis group defines objects that are members of the sub10UnitMgmtSnmpTargetEntryGrp group Unknown .1.3.6.1.4.1.39003.20.2.17 |
sub10UnitMgmtFirmwareGrpThis group defines objects that are members of the sub10UnitMgmtFirmwareGrp group Unknown .1.3.6.1.4.1.39003.20.2.18 |
sub10UnitMgmtFirmwareBankEntryGrpThis group defines objects that are members of the sub10UnitMgmtFirmwareBankEntryGrp group Unknown .1.3.6.1.4.1.39003.20.2.19 |
sub10UnitMgmtDNSEntryGrpThis group defines objects that are members of the sub10UnitMgmtDNSEntryGrp group Unknown .1.3.6.1.4.1.39003.20.2.20 |
sub10UnitMgmtEncryptionGrpThis group defines objects that are members of the sub10UnitMgmtEncryptionGrp group Unknown .1.3.6.1.4.1.39003.20.2.21 |
sub10UnitMgmtLicenseGrpThis group defines objects that are members of the sub10UnitMgmtLicenseGrp group Unknown .1.3.6.1.4.1.39003.20.2.22 |
sub10UnitMgmtSyncEGrpThis group defines objects that are members of the sub10UnitMgmtSyncEGrp group Unknown .1.3.6.1.4.1.39003.20.2.23 |
sub10UnitMgmtActionsGrpThis group defines objects that are members of the sub10UnitMgmtActionsGrp group Unknown .1.3.6.1.4.1.39003.20.2.24 |
sub10EthLclStatusEntryGrpThis group defines objects that are members of the sub10EthLclStatusEntryGrp group Unknown .1.3.6.1.4.1.39003.20.2.25 |
sub10EthRmtStatusEntryGrpThis group defines objects that are members of the sub10EthRmtStatusEntryGrp group Unknown .1.3.6.1.4.1.39003.20.2.26 |
sub10EthMgmtPhyEntryGrpThis group defines objects that are members of the sub10EthMgmtPhyEntryGrp group Unknown .1.3.6.1.4.1.39003.20.2.27 |
sub10EthMgmtVlanGrpThis group defines objects that are members of the sub10EthMgmtVlanGrp group Unknown .1.3.6.1.4.1.39003.20.2.28 |
sub10EthMgmtVlanAllowedEntryGrpThis group defines objects that are members of the sub10EthMgmtVlanAllowedEntryGrp group Unknown .1.3.6.1.4.1.39003.20.2.29 |
sub10EthMgmtQoSGrpThis group defines objects that are members of the sub10EthMgmtQoSGrp group Unknown .1.3.6.1.4.1.39003.20.2.30 |
sub10EthMgmtQoSQEntryGrpThis group defines objects that are members of the sub10EthMgmtQoSQEntryGrp group Unknown .1.3.6.1.4.1.39003.20.2.31 |
sub10EthMgmtQoSVlanEntryGrpThis group defines objects that are members of the sub10EthMgmtQoSVlanEntryGrp group Unknown .1.3.6.1.4.1.39003.20.2.32 |
sub10EthMgmtQoSPCPEntryGrpThis group defines objects that are members of the sub10EthMgmtQoSPCPEntryGrp group Unknown .1.3.6.1.4.1.39003.20.2.33 |
sub10EthMgmtQoSDSCPEntryGrpThis group defines objects that are members of the sub10EthMgmtQoSDSCPEntryGrp group Unknown .1.3.6.1.4.1.39003.20.2.34 |
sub10EthMgmtQoSMPLSEntryGrpThis group defines objects that are members of the sub10EthMgmtQoSMPLSEntryGrp group Unknown .1.3.6.1.4.1.39003.20.2.35 |
sub10EthMgmtStatsActiveEntryGrpThis group defines objects that are members of the sub10EthMgmtStatsActiveEntryGrp group Unknown .1.3.6.1.4.1.39003.20.2.36 |
sub10EthernetStatsGrpThis group defines objects that are members of the sub10EthernetStatsGrp group Unknown .1.3.6.1.4.1.39003.20.2.37 |
sub10EthernetStatsCurrEntryGrpThis group defines objects that are members of the sub10EthernetStatsCurrEntryGrp group Unknown .1.3.6.1.4.1.39003.20.2.38 |
sub10EthernetStats15mHistoryGrpThis group defines objects that are members of the sub10EthernetStats15mHistoryGrp group Unknown .1.3.6.1.4.1.39003.20.2.39 |
sub10EthStats15mHistEntryGrpThis group defines objects that are members of the sub10EthStats15mHistEntryGrp group Unknown .1.3.6.1.4.1.39003.20.2.40 |
sub10EthStats1dHistoryGrpThis group defines objects that are members of the sub10EthStats1dHistoryGrp group Unknown .1.3.6.1.4.1.39003.20.2.41 |
sub10EthStats1dHistEntryGrpThis group defines objects that are members of the sub10EthStats1dHistEntryGrp group Unknown .1.3.6.1.4.1.39003.20.2.42 |
sub10RadioLocalStatusGrpThis group defines objects that are members of the sub10RadioLocalStatusGrp group Unknown .1.3.6.1.4.1.39003.20.2.43 |
sub10RadioRemoteStatusGrpThis group defines objects that are members of the sub10RadioRemoteStatusGrp group Unknown .1.3.6.1.4.1.39003.20.2.44 |
sub10RadioMgmtGrpThis group defines objects that are members of the sub10RadioMgmtGrp group Unknown .1.3.6.1.4.1.39003.20.2.45 |
sub10RadioMgmtStatsGrpThis group defines objects that are members of the sub10RadioMgmtStatsGrp group Unknown .1.3.6.1.4.1.39003.20.2.46 |
sub10RadioMgmtStatsActiveEntryGrpThis group defines objects that are members of the sub10RadioMgmtStatsActiveEntryGrp group Unknown .1.3.6.1.4.1.39003.20.2.47 |
sub10RadioStatsGrpThis group defines objects that are members of the sub10RadioStatsGrp group Unknown .1.3.6.1.4.1.39003.20.2.48 |
sub10RadioStatsCurrentGrpThis group defines objects that are members of the sub10RadioStatsCurrentGrp group Unknown .1.3.6.1.4.1.39003.20.2.49 |
sub10RadioStats1mHistoryGrpThis group defines objects that are members of the sub10RadioStats1mHistoryGrp group Unknown .1.3.6.1.4.1.39003.20.2.50 |
sub10RadioStats1mHistEntryGrpThis group defines objects that are members of the sub10RadioStats1mHistEntryGrp group Unknown .1.3.6.1.4.1.39003.20.2.51 |
sub10RadioStats15mHistoryGrpThis group defines objects that are members of the sub10RadioStats15mHistoryGrp group Unknown .1.3.6.1.4.1.39003.20.2.52 |
sub10RadioStats15mHistEntryGrpThis group defines objects that are members of the sub10RadioStats15mHistEntryGrp group Unknown .1.3.6.1.4.1.39003.20.2.53 |
sub10RadioStats1dHistoryGrpThis group defines objects that are members of the sub10RadioStats1dHistoryGrp group Unknown .1.3.6.1.4.1.39003.20.2.54 |
sub10RadioStats1dHistEntryGrpThis group defines objects that are members of the sub10RadioStats1dHistEntryGrp group Unknown .1.3.6.1.4.1.39003.20.2.55 |