STARTEK-PRIVATE-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for STARTEK-PRIVATE-MIB.
411
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
411 total| Object Name |
|---|
startek OBJECT IDENTIFIER .1.3.6.1.4.1.260 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.260.1 |
m828Series OBJECT IDENTIFIER .1.3.6.1.4.1.260.1.1 |
m828Hubs OBJECT IDENTIFIER .1.3.6.1.4.1.260.1.1.1 |
m828HubNumberThe number of items in hub table.ro INTEGER .1.3.6.1.4.1.260.1.1.1.1 |
m828HubTableA table which maintains a list of all of the intelligent m828 series hubs on the ring being managed by the addressed agent. This table is indexed by the RS485 OOB address of the m828 series intelligent hubs. SEQUENCE OF M828hubTableEntry .1.3.6.1.4.1.260.1.1.1.2 |
m828HubTableEntryAn entry in the m828HubTable. M828hubTableEntry .1.3.6.1.4.1.260.1.1.1.2.1 |
m828HubTableIndexThe index for this hub entry.ro INTEGER .1.3.6.1.4.1.260.1.1.1.2.1.1 |
m828HubModelThe model number of the m828 series hub being managed.ro Enumeration .1.3.6.1.4.1.260.1.1.1.2.1.2 |
m828Hub485AddressThe 4 hex digit address used on the RS485 serial OOB management channel.ro OCTET STRING .1.3.6.1.4.1.260.1.1.1.2.1.3 |
m828HubRiFTolSwThe status of the Ring In fault tolerance switch on the front panel of the hub.ro Enumeration .1.3.6.1.4.1.260.1.1.1.2.1.4 |
m828HubRiFTolStateThis parameter controls the Ring In (RI) fault tolerance behavior. The default value for this parameter is the same setting as is present for m828HubRiFTolSw. SETTING this parameter overrides the value derived from m828HubRiFTolSw. Off(1) means that phantom currentis not used on the corresponding RI interface as a condition for main ring link insertion. On (2) means that phantom current is used on the corresponding RI interface as a condition for main ring link insertion. The preffered setting for this parameter is on (2).rw Enumeration .1.3.6.1.4.1.260.1.1.1.2.1.5 |
m828HubRiMaskAdministrative status for this Ring In port. By setting this parameter, a remote manager can control the partitioning of this port.rw Enumeration .1.3.6.1.4.1.260.1.1.1.2.1.6 |
m828HubRiPhDetThis parameter describes the phantom detect status for this Ring In port.ro Enumeration .1.3.6.1.4.1.260.1.1.1.2.1.7 |
m828HubRiNsrtStatusInsertion status for this Ring In port.ro Enumeration .1.3.6.1.4.1.260.1.1.1.2.1.8 |
m828HubRiBcnRemStatusThis parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition.ro Enumeration .1.3.6.1.4.1.260.1.1.1.2.1.9 |
m828RiNeighborTypeThis parameter indicates the type of nearest neighbor on the Ring In port.ro Enumeration .1.3.6.1.4.1.260.1.1.1.2.1.10 |
m828RiNeighborAddrThe address of the nearest neighbor on the Ring In port.ro OCTET STRING .1.3.6.1.4.1.260.1.1.1.2.1.11 |
m828RiTimeStampThe time the status of Ring In (was) last changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.260.1.1.1.2.1.12 |
m828HubRoFTolSwThe state of the Ring Out Fault Tolerance switch on the front panel of the unit.ro Enumeration .1.3.6.1.4.1.260.1.1.1.2.1.13 |
m828HubRoFTolStateThis parameter controls the Ring Out(RO) fault tolerance behavior. The default value for this parameter is the same setting as is present for m828HubRoFTolSw. SETTING this parameter overrides the value derived from m828HubRoFTolSw. Off(1) means that phantom currentis not used on the corresponding RO interface as a condition for main ring link insertion. On (2) means that phantom current is used on the corresponding RO interface as a condition for main ring link insertion. The preffered setting for this parameter is on (2).rw Enumeration .1.3.6.1.4.1.260.1.1.1.2.1.14 |
m828HubRoMaskAdministrative status for this Ring Out port. By setting this parameter, a remote manager can control the partitioning of this port.rw Enumeration .1.3.6.1.4.1.260.1.1.1.2.1.15 |
m828HubRoPhDetThis parameter describes the phantom detect status for this Ring Out port.ro Enumeration .1.3.6.1.4.1.260.1.1.1.2.1.16 |
m828HubRoNsrtStatusInsertion status for this Ring Out port.ro Enumeration .1.3.6.1.4.1.260.1.1.1.2.1.17 |
m828HubRoBcnRemStatusThis parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition.ro Enumeration .1.3.6.1.4.1.260.1.1.1.2.1.18 |
m828RoNeighborTypeThis parameter indicates the type of nearest neighbor on the Ring Out port.ro Enumeration .1.3.6.1.4.1.260.1.1.1.2.1.19 |
m828RoNeighborAddrThe address of the nearest neighbor on the Ring Out port.ro OCTET STRING .1.3.6.1.4.1.260.1.1.1.2.1.20 |
m828RoTimeStampThe time the status of Ring Out (was) last changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.260.1.1.1.2.1.21 |
m828HubDataRateSwitchSetting of this parameter changes the data rate of this unit. A value of noSwitch(3) indicates that the setting of the data rate is not available on this unit.ro Enumeration .1.3.6.1.4.1.260.1.1.1.2.1.22 |
m828HubDataRateStateThis parameter indicates the current data rate of this unit.rw Enumeration .1.3.6.1.4.1.260.1.1.1.2.1.23 |
m828HubDataRateTimeStampThe time the data rate status (was) last changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.260.1.1.1.2.1.24 |
m828HubMgmtStatusThe operational status of this unit.ro Enumeration .1.3.6.1.4.1.260.1.1.1.2.1.25 |
m828HubProxyAgentIDThe physical layer MAC Address of the agent.ro OCTET STRING .1.3.6.1.4.1.260.1.1.1.2.1.26 |
m828HubCodeVersionThe firmware version number of this unit.ro OCTET STRING .1.3.6.1.4.1.260.1.1.1.2.1.27 |
m828HubRawCommandDataThis is used to send raw 485 serial data to this unit.rw OCTET STRING .1.3.6.1.4.1.260.1.1.1.2.1.28 |
m828HubLobeNumberThe number of items in the hub lobe table.ro INTEGER .1.3.6.1.4.1.260.1.1.1.3 |
m828HubLobeTableA table which contains the control and status information for the lobes. SEQUENCE OF M828hubLobeEntry .1.3.6.1.4.1.260.1.1.1.4 |
m828HubLobeEntryA collection of control and status parameters kept for each lobe. M828hubLobeEntry .1.3.6.1.4.1.260.1.1.1.4.1 |
m828HubIndexThe index into the m828HubTable of the mau this lobe is on.ro INTEGER .1.3.6.1.4.1.260.1.1.1.4.1.1 |
m828HubLobePortThe port of the mau this lobe is on.ro INTEGER .1.3.6.1.4.1.260.1.1.1.4.1.2 |
m828HubLobePhDetPhantom current status for this lobe port. A value of 1 corresponds to no phantom current detected. A value of 2 corresponds to phantom presence.ro Enumeration .1.3.6.1.4.1.260.1.1.1.4.1.3 |
m828HubLobeMaskAdministrative status for this lobe port. By setting this parameter, a remote manager can control access to the lobe port.rw Enumeration .1.3.6.1.4.1.260.1.1.1.4.1.4 |
m828HubLobeNsrtStatusActual insertion status for this lobe port. A 1 value means that the corresponding station is not connected to the ring. A 2 value means that the corresponding station is connected to the ring.ro Enumeration .1.3.6.1.4.1.260.1.1.1.4.1.5 |
m828HubLobeMacAddrThe MAC layer address of the station which is attached to the corresponding lobe port.ro OCTET STRING .1.3.6.1.4.1.260.1.1.1.4.1.6 |
m828HubLobeBcnRemStatusThis parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition.ro Enumeration .1.3.6.1.4.1.260.1.1.1.4.1.7 |
m828HubLobeTimeStampThe time the status of this lobe (was) last changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.260.1.1.1.4.1.8 |
fSeries OBJECT IDENTIFIER .1.3.6.1.4.1.260.1.2 |
fChassis OBJECT IDENTIFIER .1.3.6.1.4.1.260.1.2.1 |
fChassisNumberThe number of chassis in tablero INTEGER .1.3.6.1.4.1.260.1.2.1.1 |
fChassisTableA table which describes which modules are plugged into which slots of the chassis. SEQUENCE OF FchassisTableEntry .1.3.6.1.4.1.260.1.2.1.2 |
fChassisTableEntry FchassisTableEntry .1.3.6.1.4.1.260.1.2.1.2.1 |
fChassisIndexIndex of this entryro INTEGER .1.3.6.1.4.1.260.1.2.1.2.1.1 |
fChassisModelThe model number of the f series chassis in which the addressed management agent is installed.ro Enumeration .1.3.6.1.4.1.260.1.2.1.2.1.2 |
fChassisPowStatusThe status of the power supply or supplies in the chassis.ro Enumeration .1.3.6.1.4.1.260.1.2.1.2.1.3 |
fChassisLocationThe location of the chassis.ro Enumeration .1.3.6.1.4.1.260.1.2.1.2.1.4 |
fTRMainRing OBJECT IDENTIFIER .1.3.6.1.4.1.260.1.2.2 |
fTRMainRingNumberThe number of the ring.ro INTEGER .1.3.6.1.4.1.260.1.2.2.1 |
fTRMainRingTableA table which maintains a list of all of the intelligent Focus series hubs on the ring being managed by the addressed agent. This table is INDEXed by the RS485 OOB address of the Focus series intelligent hubs. SEQUENCE OF FTRMainRingTableEntry .1.3.6.1.4.1.260.1.2.2.2 |
fTRMainRingTableEntryAn entry in the fTRMainRingTable FTRMainRingTableEntry .1.3.6.1.4.1.260.1.2.2.2.1 |
fTRMainRingTableIndexThe index for this ring entry.ro INTEGER .1.3.6.1.4.1.260.1.2.2.2.1.1 |
fTRMainRingModelThe model number of the Focus series hub being managed.ro Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.2 |
fTRMainRing485AddressThe 6 hex digit address used on the RS485 serial OOB management channel.ro OCTET STRING .1.3.6.1.4.1.260.1.2.2.2.1.3 |
fTRMainRingSlotIndexThe slot id.ro INTEGER .1.3.6.1.4.1.260.1.2.2.2.1.4 |
fTRMainRingChassisIndexThe index of the chassis the card is in.ro INTEGER .1.3.6.1.4.1.260.1.2.2.2.1.5 |
fTRMainRingRiFTolStateThis parameter controls the Ring In (RI) fault tolerance behavior. Off(1) means that phantom current is not used on the corresponding RI interface as a condition for main ring link insertion. On (2) means that phantom current is used on the corresponding RI interface as a condition for main ring link insertion. The preferred setting for this parameter is on (2).rw Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.6 |
fTRMainRingRiMaskAdministrative status for this Ring In port. By setting this parameter, a remote manager can control the partitioning of this port.rw Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.7 |
fTRMainRingRiPhDetThis parameter describes the phantom detect status of the Ring In port.ro Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.8 |
fTRMainRingRiNsrtStatusInsertion status for this Ring In port.ro Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.9 |
fTRMainRingRiBcnRemStatusThis parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition.ro Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.10 |
fTRMainRingRiCableTypeThis parameter indicates the type of physical cabling used for the network interface on the Ring In port.ro Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.11 |
fTRMainRingRiNghbrTypeThis parameter indicates the type of nearest neighbor on the Ring In port.ro Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.12 |
fTRMainRingRiNghbrAddrThe address of the nearest neighbor on the Ring In port.ro OCTET STRING .1.3.6.1.4.1.260.1.2.2.2.1.13 |
fTRMainRingRiTimeStampThe time the status of Ring In (was) last changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.260.1.2.2.2.1.14 |
fTRMainRingRoFTolStateThis controls the Ring Out (RO) fault tolerance behavior. Off(1) means that phantom current is not used on the corresponding RO interface as a condition for main ring link insertion. On (2) means tha phantom current is used on the corresponding RO interface as a condition for main ring link insertion. The preferred setting for this parameter is on (2).rw Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.15 |
fTRMainRingRoMaskAdministrative status for this Ring Out port. By setting this parameter, a remote manager can control the partitioning of this port.rw Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.16 |
fTRMainRingRoPhDetThis parameter describes the phantom detect status for this Ring Out port.ro Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.17 |
fTRMainRingRoNsrtStatusInsertion status for this Ring Out port.ro Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.18 |
fTRMainRingRoBcnRemStatusThis parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition.ro Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.19 |
fTRMainRingRoCableTypeThis parameter indicates the type of physical cabling used for the network interface on the Ring Out port.ro Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.20 |
fTRMainRingRoNghbrTypeThis parameter indicates the type of nearest neighbor on the Ring Out port.ro Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.21 |
fTRMainRingRoNghbrAddrThe address of the nearest neighbor on the Ring Out port.ro OCTET STRING .1.3.6.1.4.1.260.1.2.2.2.1.22 |
fTRMainRingRoTimeStampThe time the status of Ring Out (was) last changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.260.1.2.2.2.1.23 |
fTRMainRingDataRateStateThis parameter indicates the current data rate of this unit.rw Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.24 |
fTRMainRingDataRateTimeStampThe time the data rate status (was) last changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.260.1.2.2.2.1.25 |
fTRMainRingBkPlnNsrtStateBackplane insertion status for this unit.rw Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.26 |
fTRMainRingBkPlnTimeStampThe time the backplane insert status (was) last changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.260.1.2.2.2.1.27 |
fTRMainRingLobePhDetPhantom current status for this lobe port. A value of 1 corresponds to no phantom current detected. A value of 2 corresponds to phantom presence.ro Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.28 |
fTRMainRingLobeMaskAdministrative status for this lobe port. By setting this parameter, a remote manager can control access to the lobe port.rw Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.29 |
fTRMainRingLobeNsrtStatusActual insertion status for this lobe port. A 1 value means that the corresponding station is not connected to the ring. A 2 value means that the corresponding station is connected to the ring.ro Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.30 |
fTRMainRingLobeMacAddrThe MAC layer address of the station which is attached to the corresponding lobe port.ro OCTET STRING .1.3.6.1.4.1.260.1.2.2.2.1.31 |
fTRMainRingLobeBcnRemStatusThis parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition.ro Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.32 |
fTRMainRingLobeTimeStampThe time the status of this lobe (was) last changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.260.1.2.2.2.1.33 |
fTRMainRingMgmtStatusThe operational status of this unit.ro Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.34 |
fTRMainRingProxyAgentIDThe physical layer MAC Address of the agent.ro OCTET STRING .1.3.6.1.4.1.260.1.2.2.2.1.35 |
fTRMainRingAttachedAgentTypeThe type of the attached agent.ro Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.36 |
fTRMainRingAttachedAgentStateThe state of the attached agent.rw Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.37 |
fTRMainRingTemperatureStatusThe temperature status of this unit.ro Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.38 |
fTRMainRingAutoRecovControlThis parameter controls the auto recovery operation of this unit.rw Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.39 |
fTRMainRingAutoRecovRetriesThe number of Auto Recoveries performed by this unit.rw INTEGER .1.3.6.1.4.1.260.1.2.2.2.1.40 |
fTRMainRingCodeVersionThe firmware version number of this unit.ro OCTET STRING .1.3.6.1.4.1.260.1.2.2.2.1.41 |
fTRMainRingAutoRecovStateThe auto recovery state of this unit.ro Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.42 |
fTRMainRingRawCommandDataThis is used to send raw 485 serial data to this unit.rw OCTET STRING .1.3.6.1.4.1.260.1.2.2.2.1.43 |
fTRMainRingPowerStatusThe status of the power supply as seen by this unit.ro Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.44 |
fTRMainRingCageTypeThe model number of the f series chassis the card is is.ro Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.45 |
fTRMainRingAutoRecovModeThis parameter describes the auto recovery mode.rw Enumeration .1.3.6.1.4.1.260.1.2.2.2.1.46 |
fTRLobe OBJECT IDENTIFIER .1.3.6.1.4.1.260.1.2.3 |
fTRLobeNumberThe number of items in the lobe tablero INTEGER .1.3.6.1.4.1.260.1.2.3.1 |
fTRLobeTableA table which maintains a list of all of the intelligent Focus series hubs on the ring being managed by the addressed agent. This table is INDEXed by the RS485 OOB address of the Focus series intelligent hubs. SEQUENCE OF FTRLobeTableEntry .1.3.6.1.4.1.260.1.2.3.2 |
fTRLobeTableEntryAn entry in the fTRLobeTable FTRLobeTableEntry .1.3.6.1.4.1.260.1.2.3.2.1 |
fTRLobeTableIndexThe index for this lobe entryro INTEGER .1.3.6.1.4.1.260.1.2.3.2.1.1 |
fTRLobeModelThe Mau type of the Focus series lobe being managed.ro Enumeration .1.3.6.1.4.1.260.1.2.3.2.1.2 |
fTRLobe485AddressThe 6 hex digit address used on the RS485 serial OOB management channel.ro OCTET STRING .1.3.6.1.4.1.260.1.2.3.2.1.3 |
fTRLobeSlotIndexThe slot id.ro INTEGER .1.3.6.1.4.1.260.1.2.3.2.1.4 |
fTRLobeChassisIndexThe index of the chassis the card is in.ro INTEGER .1.3.6.1.4.1.260.1.2.3.2.1.5 |
fTRLobeDataRateStateThis parameter indicates the current data rate of this unit.rw Enumeration .1.3.6.1.4.1.260.1.2.3.2.1.6 |
fTRLobeDataRateTimeStampThe time the data rate status (was) last changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.260.1.2.3.2.1.7 |
fTRLobeBkPlnNsrtStateBackplane insertion status for this unit.rw Enumeration .1.3.6.1.4.1.260.1.2.3.2.1.8 |
fTRLobeBkPlnTimeStampThe time the backplane insert status (was) last changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.260.1.2.3.2.1.9 |
fTRLobeMgmtStatusThe operational status of this unit.ro Enumeration .1.3.6.1.4.1.260.1.2.3.2.1.10 |
fTRLobeProxyAgentIDThe physical layer MAC Address of the agent.ro OCTET STRING .1.3.6.1.4.1.260.1.2.3.2.1.11 |
fTRLobeTemperatureStatusThe temperature status of this unit.ro Enumeration .1.3.6.1.4.1.260.1.2.3.2.1.12 |
fTRLobeAutoRecovControlThis parameter controls the auto recovery operation of this unit.rw Enumeration .1.3.6.1.4.1.260.1.2.3.2.1.13 |
fTRLobeAutoRecovModeThis parameter describes the auto recovery mode.rw Enumeration .1.3.6.1.4.1.260.1.2.3.2.1.14 |
fTRLobeAutoRecovRetriesThe number of Auto Recoveries performed by this unit.rw INTEGER .1.3.6.1.4.1.260.1.2.3.2.1.15 |
fTRLobeCodeVersionThe firmware version number of this unit.ro OCTET STRING .1.3.6.1.4.1.260.1.2.3.2.1.16 |
fTRLobeAutoRecovStateThe auto recovery state of this unit.ro Enumeration .1.3.6.1.4.1.260.1.2.3.2.1.17 |
fTRLobeRawCommandDataThis is used to send raw 485 serial data to this unit.rw OCTET STRING .1.3.6.1.4.1.260.1.2.3.2.1.18 |
fTRLobePowerStatusThe status of the power supply as seen by this unit.ro Enumeration .1.3.6.1.4.1.260.1.2.3.2.1.19 |
fTRLobeCageTypeThe model number of the fseries chassis the card is is.ro Enumeration .1.3.6.1.4.1.260.1.2.3.2.1.20 |
fTRLobeConnectNumberThe number of items in connection tablero INTEGER .1.3.6.1.4.1.260.1.2.3.3 |
fTRLobeConnectTableA table which contains the control and status information for the lobes. SEQUENCE OF FTRLobeConnectEntry .1.3.6.1.4.1.260.1.2.3.4 |
fTRLobeConnectEntryA collection of control and status parameters kept for each lobe. FTRLobeConnectEntry .1.3.6.1.4.1.260.1.2.3.4.1 |
fTRLobeIndexThe index into the fTRLobeTable of the mau this lobe is on.ro INTEGER .1.3.6.1.4.1.260.1.2.3.4.1.1 |
fTRLobeConnectPortThe port of the mau this lobe is on.ro INTEGER .1.3.6.1.4.1.260.1.2.3.4.1.2 |
fTRLobeConnectPhDetPhantom current status for this lobe port. A value of 1 corresponds to no phantom current detected. A value of 2 corresponds to phantom presence.ro Enumeration .1.3.6.1.4.1.260.1.2.3.4.1.3 |
fTRLobeConnectMaskAdministrative status for this lobe port. By setting this parameter, a remote manager can control access to the lobe port.rw Enumeration .1.3.6.1.4.1.260.1.2.3.4.1.4 |
fTRLobeConnectNsrtStatusActual insertion status for this lobe port. A 1 value means that the corresponding station is not connected to the ring. A 2 value means that the corresponding station is connected to the ring.ro Enumeration .1.3.6.1.4.1.260.1.2.3.4.1.5 |
fTRLobeConnectMacAddrThe MAC layer address of the station which is attached to the corresponding lobe port.ro OCTET STRING .1.3.6.1.4.1.260.1.2.3.4.1.6 |
fTRLobeConnectBcnRemStatusThis parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition.ro Enumeration .1.3.6.1.4.1.260.1.2.3.4.1.7 |
fTRLobeConnectBcnRemCauseThis parameter describes the cause of any automatic beacon removalro Enumeration .1.3.6.1.4.1.260.1.2.3.4.1.8 |
fTRLobeConnectTimeStampThe time the status of this lobe (was) last changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.260.1.2.3.4.1.9 |
fEthernet OBJECT IDENTIFIER .1.3.6.1.4.1.260.1.2.4 |
fEthernetNumberThe number of items in concentrator tablero INTEGER .1.3.6.1.4.1.260.1.2.4.1 |
fEthernetTableA table which maintains a list of all of the Focus series ethernet concentrators in the repeater being managed by the addressed agent. This table is INDEXed by the repeater group id of the Focus series ethernet concentrators. SEQUENCE OF FEthernetTableEntry .1.3.6.1.4.1.260.1.2.4.2 |
fEthernetTableEntryAn entry in the fEthernetTable FEthernetTableEntry .1.3.6.1.4.1.260.1.2.4.2.1 |
fEthernetTableIndexThe index for this hub entry.ro INTEGER .1.3.6.1.4.1.260.1.2.4.2.1.1 |
fEthernetModelThe model number of the Focus series ethernet concentrator being managed.ro Enumeration .1.3.6.1.4.1.260.1.2.4.2.1.2 |
fEthernet485AddressThe 6 hex digit address used on the RS485 serial OOB management channel.ro OCTET STRING .1.3.6.1.4.1.260.1.2.4.2.1.3 |
fEthernetSlotIndexThe slot id.ro INTEGER .1.3.6.1.4.1.260.1.2.4.2.1.4 |
fEthernetChassisIndexThe index of the chassis the card is in.ro INTEGER .1.3.6.1.4.1.260.1.2.4.2.1.5 |
fEthernetBkPlnNsrtStateBackplane insertion status for this unit.rw Enumeration .1.3.6.1.4.1.260.1.2.4.2.1.6 |
fEthernetBkPlnTimeStampThe time the backplane insert status (was) last changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.260.1.2.4.2.1.7 |
fEthernetMgmtStatusThe operational status of this unit.ro Enumeration .1.3.6.1.4.1.260.1.2.4.2.1.8 |
fEthernetProxyAgentIDThe physical layer MAC Address of the agent.ro OCTET STRING .1.3.6.1.4.1.260.1.2.4.2.1.9 |
fEthernetTemperatureStatusThe temperature status of this unit.ro Enumeration .1.3.6.1.4.1.260.1.2.4.2.1.10 |
fEthernetCodeVersionThe firmware version number of this unit.ro OCTET STRING .1.3.6.1.4.1.260.1.2.4.2.1.11 |
fEthernetRawCommandDataThis is used to send raw 485 serial data to this unit.rw OCTET STRING .1.3.6.1.4.1.260.1.2.4.2.1.12 |
fEthernetPowerStatusThe status of the power supply as seen by this unit.ro Enumeration .1.3.6.1.4.1.260.1.2.4.2.1.13 |
fEthernetCageTypeThe model number of the fseries chassis the card is is.ro Enumeration .1.3.6.1.4.1.260.1.2.4.2.1.14 |
fFddi OBJECT IDENTIFIER .1.3.6.1.4.1.260.1.2.5 |
fTwx OBJECT IDENTIFIER .1.3.6.1.4.1.260.1.2.6 |
rmonAgent OBJECT IDENTIFIER .1.3.6.1.4.1.260.1.2.7 |
rmonAgentDescriptionThe text name for this agent.rw DisplayString .1.3.6.1.4.1.260.1.2.7.1 |
rmonAgentIDThe text name for this agent.ro OCTET STRING .1.3.6.1.4.1.260.1.2.7.2 |
rmonAgentOOBNumberThe number of items in connection tablero INTEGER .1.3.6.1.4.1.260.1.2.7.3 |
rmonAgentOOBTable SEQUENCE OF RmonAgentOOBTableEntry .1.3.6.1.4.1.260.1.2.7.4 |
rmonAgentOOBTableEntryAn entry in the rmonAgentOOBTable. RmonAgentOOBTableEntry .1.3.6.1.4.1.260.1.2.7.4.1 |
rmonAgentOOBTableIndexThe index of this entry.ro INTEGER .1.3.6.1.4.1.260.1.2.7.4.1.1 |
rmonAgentOOBTableDescriptionThe text description of this OOB (Out Of Band) table.rw DisplayString .1.3.6.1.4.1.260.1.2.7.4.1.2 |
rmonAgentOOBTableDataAn opaque data structure used for management.ro Opaque .1.3.6.1.4.1.260.1.2.7.4.1.3 |
rmonAgentOOBRawDataCommandRaw method of sending data on channel.rw OCTET STRING .1.3.6.1.4.1.260.1.2.7.4.1.4 |
rmonAgentIBNumberThe number of items in the connection table.ro INTEGER .1.3.6.1.4.1.260.1.2.7.5 |
rmonAgentIBTable SEQUENCE OF RmonAgentIBTableEntry .1.3.6.1.4.1.260.1.2.7.6 |
rmonAgentIBTableEntryAn entry in the rmonAgentIBTable. RmonAgentIBTableEntry .1.3.6.1.4.1.260.1.2.7.6.1 |
rmonAgentIBTableIndexro INTEGER .1.3.6.1.4.1.260.1.2.7.6.1.1 |
rmonAgentIBTableDescriptionThe text description of this IB (In Band) Table.rw DisplayString .1.3.6.1.4.1.260.1.2.7.6.1.2 |
rmonAgentIBNetworkTypero Enumeration .1.3.6.1.4.1.260.1.2.7.6.1.3 |
rmonAgentIBSampleIntervalrw Counter .1.3.6.1.4.1.260.1.2.7.6.1.4 |
rmonAgentIBMacFramesro Counter .1.3.6.1.4.1.260.1.2.7.6.1.5 |
rmonAgentIBDataFramesro Counter .1.3.6.1.4.1.260.1.2.7.6.1.6 |
rmonAgentIBMacBytesro Counter .1.3.6.1.4.1.260.1.2.7.6.1.7 |
rmonAgentIBDataBytesro Counter .1.3.6.1.4.1.260.1.2.7.6.1.8 |
rmonAgentIBUtilizationro Counter .1.3.6.1.4.1.260.1.2.7.6.1.9 |
rmonAgentIBMACUtilizationro Counter .1.3.6.1.4.1.260.1.2.7.6.1.10 |
rmonAgentIBNonMACUtilizationro Counter .1.3.6.1.4.1.260.1.2.7.6.1.11 |
rmonAgentIBMACData0An opaque data structure used for management.ro Opaque .1.3.6.1.4.1.260.1.2.7.6.1.12 |
rmonAgentIBMACData1An opaque data structure used for management.ro Opaque .1.3.6.1.4.1.260.1.2.7.6.1.13 |
rmonAgentIBMACData2An opaque data structure used for management.ro Opaque .1.3.6.1.4.1.260.1.2.7.6.1.14 |
rmonAgentIBMACData3An opaque data structure used for management.ro Opaque .1.3.6.1.4.1.260.1.2.7.6.1.15 |
rmonAgentIBMACData4An opaque data structure used for management.ro Opaque .1.3.6.1.4.1.260.1.2.7.6.1.16 |
rmonAgentIBMACData5An opaque data structure used for management.ro Opaque .1.3.6.1.4.1.260.1.2.7.6.1.17 |
rmonAgentIBMACData6An opaque data structure used for management.ro Opaque .1.3.6.1.4.1.260.1.2.7.6.1.18 |
rmonAgentIBMACData7An opaque data structure used for management.ro Opaque .1.3.6.1.4.1.260.1.2.7.6.1.19 |
rmonAgentIBMACData8An opaque data structure used for management.ro Opaque .1.3.6.1.4.1.260.1.2.7.6.1.20 |
rmonAgentIBMACData9An opaque data structure used for management.ro Opaque .1.3.6.1.4.1.260.1.2.7.6.1.21 |
rmonAgentIBMACData10An opaque data structure used for management.ro Opaque .1.3.6.1.4.1.260.1.2.7.6.1.22 |
rmonAgentIBMACData11An opaque data structure used for management.ro Opaque .1.3.6.1.4.1.260.1.2.7.6.1.23 |
rmonAgentMonitorCommandA method of sending raw commands to the agent monitor.rw DisplayString .1.3.6.1.4.1.260.1.2.7.7 |
rmonAgentMonitorResponseThis parameter contains the text response to an agent monitor command.ro DisplayString .1.3.6.1.4.1.260.1.2.7.8 |
rmonAgentDownloadDatarw OCTET STRING .1.3.6.1.4.1.260.1.2.7.9 |
rmonAgentNoMapOidrw OBJECT IDENTIFIER .1.3.6.1.4.1.260.1.2.7.10 |
rmonAgentMACStatTable SEQUENCE OF RmonAgentMACStatTableEntry .1.3.6.1.4.1.260.1.2.7.11 |
rmonAgentMACStatTableEntryAn entry in the rmonAgentIBTable. RmonAgentMACStatTableEntry .1.3.6.1.4.1.260.1.2.7.11.1 |
rmonAgentMACStatTableDataAn opaque data structure used for management.ro Opaque .1.3.6.1.4.1.260.1.2.7.11.1.1 |
rmonAgentIPAdressControlAn opaque data structure used for management.rw Opaque .1.3.6.1.4.1.260.1.2.7.12 |
stackable OBJECT IDENTIFIER .1.3.6.1.4.1.260.1.3 |
stackableHubs OBJECT IDENTIFIER .1.3.6.1.4.1.260.1.3.1 |
stackableHubNumberThe number of items in hub tablero INTEGER .1.3.6.1.4.1.260.1.3.1.1 |
stackableHubTableA table which maintains a list of all of the intelligent stackable series hubs on the ring being managed by the addressed agent. This table is indexed by the RS485 OOB address of the stackable series intelligent hubs. SEQUENCE OF StackablehubTableEntry .1.3.6.1.4.1.260.1.3.1.2 |
stackableHubTableEntryAn entry in the stackableHubTable. StackablehubTableEntry .1.3.6.1.4.1.260.1.3.1.2.1 |
stackableHubTableIndexThe index for this hub entryro INTEGER .1.3.6.1.4.1.260.1.3.1.2.1.1 |
stackableHubModelThe model number of the stackable series hub being managed.ro Enumeration .1.3.6.1.4.1.260.1.3.1.2.1.2 |
stackableHub485AddressThe 6 hex digit address used on the RS485 serial OOB management channel.ro OCTET STRING .1.3.6.1.4.1.260.1.3.1.2.1.3 |
stackableHubRiFTolStateThis parameter controls the Ring In (RI) fault tolerance behavior. Off(1) means that phantom current is not used on the corresponding RI interface as a condition for main ring link insertion. On (2) means tha phantom current is used on the corresponding RI interface as a condition for main ring link insertion. The preferred setting for this parameter is on (2).rw Enumeration .1.3.6.1.4.1.260.1.3.1.2.1.4 |
stackableHubRiMaskAdministrative status for this Ring In port. By setting this parameter, a remote manager can control the partitioning of this port.rw Enumeration .1.3.6.1.4.1.260.1.3.1.2.1.5 |
stackableHubRiPhDetThis parameter describes the phantom detect status for this Ring In port.ro Enumeration .1.3.6.1.4.1.260.1.3.1.2.1.6 |
stackableHubRiNsrtStatusInsertion status for this Ring In port.ro Enumeration .1.3.6.1.4.1.260.1.3.1.2.1.7 |
stackableHubRiBcnRemStatusThis parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition.ro Enumeration .1.3.6.1.4.1.260.1.3.1.2.1.8 |
stackableHubRiNeighborTypeThis parameter indicates the type of nearest neighbor on the Ring In port.ro Enumeration .1.3.6.1.4.1.260.1.3.1.2.1.9 |
stackableHubRiNeighborAddrThe address of the nearest neighbor on the Ring In port.ro OCTET STRING .1.3.6.1.4.1.260.1.3.1.2.1.10 |
stackableHubRiTimeStampThe time the status of Ring In (was) last changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.260.1.3.1.2.1.11 |
stackableHubRoFTolStateThis parameter controls the Ring Out(RO) fault tolerance behavior. Off(1) means that phantom current is not used on the corresponding RO interface as a condition for main ring link insertion. On (2) means tha phantom current is used on the corresponding RO interface as a condition for main ring link insertion. The preferred setting for this parameter is on (2).rw Enumeration .1.3.6.1.4.1.260.1.3.1.2.1.12 |
stackableHubRoMaskAdministrative status for this Ring Out port. By setting this parameter, a remote manager can control the partitioning of this port.rw Enumeration .1.3.6.1.4.1.260.1.3.1.2.1.13 |
stackableHubRoPhDetThis parameter describes the phantom detect status for this Ring Out port.ro Enumeration .1.3.6.1.4.1.260.1.3.1.2.1.14 |
stackableHubRoNsrtStatusInsertion status for this Ring Out port.ro Enumeration .1.3.6.1.4.1.260.1.3.1.2.1.15 |
stackableHubRoBcnRemStatusThis parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition.ro Enumeration .1.3.6.1.4.1.260.1.3.1.2.1.16 |
stackableHubRoNeighborTypeThis parameter indicates the type of nearest neighbor on the Ring Out port.ro Enumeration .1.3.6.1.4.1.260.1.3.1.2.1.17 |
stackableHubRoNeighborAddrThe address of the nearest neighbor on the Ring Out port.ro OCTET STRING .1.3.6.1.4.1.260.1.3.1.2.1.18 |
stackableHubRoTimeStampThe time the status of Ring Out (was) last changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.260.1.3.1.2.1.19 |
stackableHubDataRateStateThis parameter indicates the current data rate of this unit.rw Enumeration .1.3.6.1.4.1.260.1.3.1.2.1.20 |
stackableHubDataRateTimeStampThe time the data rate status (was) last changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.260.1.3.1.2.1.21 |
stackableHubMgmtStatusThe operational status of this unit.ro Enumeration .1.3.6.1.4.1.260.1.3.1.2.1.22 |
stackableHubProxyAgentIDThe physical layer MAC Address of the agent.ro OCTET STRING .1.3.6.1.4.1.260.1.3.1.2.1.23 |
stackableHubAttachedAgentTypeThe type of the attached agent.ro Enumeration .1.3.6.1.4.1.260.1.3.1.2.1.24 |
stackableHubAttachedAgentStateThe state of the attached agent.rw Enumeration .1.3.6.1.4.1.260.1.3.1.2.1.25 |
stackableHubTemperatureStatusThe temperature status of this unit.ro Enumeration .1.3.6.1.4.1.260.1.3.1.2.1.26 |
stackableHubAutoRecovControlThis parameter controls the auto recovery operation of this unit.rw Enumeration .1.3.6.1.4.1.260.1.3.1.2.1.27 |
stackableHubAutoRecovRetriesThe number of Auto Recoveries performed by this unit.rw INTEGER .1.3.6.1.4.1.260.1.3.1.2.1.28 |
stackableHubCodeVersionThe firmware version number of this unit.ro OCTET STRING .1.3.6.1.4.1.260.1.3.1.2.1.29 |
stackableHubAutoRecovStateThe auto recovery state of this unit.ro Enumeration .1.3.6.1.4.1.260.1.3.1.2.1.30 |
stackableHubRawCommandDataThis is used to send raw 485 serial data to this unit.rw OCTET STRING .1.3.6.1.4.1.260.1.3.1.2.1.31 |
stackableHubAutoRecovModeThis parameter describes the auto recovery mode.rw Enumeration .1.3.6.1.4.1.260.1.3.1.2.1.32 |
stackableHubLobeNumberThe number of items in the hub lobe table.ro INTEGER .1.3.6.1.4.1.260.1.3.1.3 |
stackableHubLobeTableA table which contains the control and status information for the lobes. SEQUENCE OF StackablehubLobeEntry .1.3.6.1.4.1.260.1.3.1.4 |
stackableHubLobeEntryA collection of control and status parameters kept for each lobe. StackablehubLobeEntry .1.3.6.1.4.1.260.1.3.1.4.1 |
stackableHubIndexThe index into the stackableHubTable of the mau this lobe is on.ro INTEGER .1.3.6.1.4.1.260.1.3.1.4.1.1 |
stackableHubLobePortThe port of the mau this lobe is on.ro INTEGER .1.3.6.1.4.1.260.1.3.1.4.1.2 |
stackableHubLobePhDetPhantom current status for this lobe port. A value of 1 corresponds to no phantom current detected. A value of 2 corresponds to phantom presence.ro Enumeration .1.3.6.1.4.1.260.1.3.1.4.1.3 |
stackableHubLobeMaskAdministrative status for this lobe port. By setting this parameter, a remote manager can control access to the lobe port.rw Enumeration .1.3.6.1.4.1.260.1.3.1.4.1.4 |
stackableHubLobeNsrtStatusActual insertion status for this lobe port. A 1 value means that the corresponding station is not connected to the ring. A 2 value means that the corresponding station is connected to the ring.ro Enumeration .1.3.6.1.4.1.260.1.3.1.4.1.5 |
stackableHubLobeMacAddrThe MAC layer address of the station which is attached to the corresponding lobe port.ro OCTET STRING .1.3.6.1.4.1.260.1.3.1.4.1.6 |
stackableHubLobeBcnRemStatusThis parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition.ro Enumeration .1.3.6.1.4.1.260.1.3.1.4.1.7 |
stackableHubLobeBcnRemCauseThis parameter describes the cause of any automatic beacon removal operations performed by the agent on this port.ro Enumeration .1.3.6.1.4.1.260.1.3.1.4.1.8 |
stackableHubLobeTimeStampThe time the status of this lobe (was) last changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.260.1.3.1.4.1.9 |
superStackHubs OBJECT IDENTIFIER .1.3.6.1.4.1.260.1.3.2 |
superStackHubNumberThe number of items in hub tablero INTEGER .1.3.6.1.4.1.260.1.3.2.1 |
superStackHubTableA table which maintains a list of all of the intelligent superStack series hubs on the ring being managed by the addressed agent. This table is indexed by the RS485 OOB address of the superStack series intelligent hubs. SEQUENCE OF SuperStackHubTableEntry .1.3.6.1.4.1.260.1.3.2.2 |
superStackHubTableEntryAn entry in the superStackHubTable. SuperStackHubTableEntry .1.3.6.1.4.1.260.1.3.2.2.1 |
superStackHubTableIndexThe index for this hub entryro INTEGER .1.3.6.1.4.1.260.1.3.2.2.1.1 |
superStackHubModelThe model number of the superStack series hub being managed.ro Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.2 |
superStackHub485AddressThe 6 hex digit address used on the RS485 serial OOB management channel.ro OCTET STRING .1.3.6.1.4.1.260.1.3.2.2.1.3 |
superStackHubStackPositionThe integer position in a stack of units. The top position is 1.ro INTEGER .1.3.6.1.4.1.260.1.3.2.2.1.4 |
superStackRiConfigurationThis parameter describes the physical configured state of Ring In. Ring In is disabled if there is another Ring In within the cascaded stack of hubs.ro Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.5 |
superStackHubRiFTolStateThis parameter controls the Ring In (RI) fault tolerance behavior. Off(1) means that phantom current is not used on the corresponding RI interface as a condition for main ring link insertion. On (2) means tha phantom current is used on the corresponding RI interface as a condition for main ring link insertion. The preferred setting for this parameter is on (2).rw Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.6 |
superStackHubRiMaskAdministrative status for this Ring In port. By setting this parameter, a remote manager can control the partitioning of this port.rw Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.7 |
superStackHubRiPhDetThis parameter describes the phantom detect status for this Ring In port.ro Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.8 |
superStackHubRiNsrtStatusInsertion status for this Ring In port.ro Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.9 |
superStackHubRiBcnRemStatusThis parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition.ro Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.10 |
superStackRoConfigurationThis parameter describes the physical configured state of Ring Out. Ring Out is disabled if there is another Ring Out within the cascaded stack of hubs.ro Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.11 |
superStackHubRoFTolStateThis parameter controls the Ring Out(RO) fault tolerance behavior. Off(1) means that phantom current is not used on the corresponding RO interface as a condition for main ring link insertion. On (2) means tha phantom current is used on the corresponding RO interface as a condition for main ring link insertion. The preferred setting for this parameter is on (2).rw Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.12 |
superStackHubRoMaskAdministrative status for this Ring Out port. By setting this parameter, a remote manager can control the partitioning of this port.rw Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.13 |
superStackHubRoPhDetThis parameter describes the phantom detect status for this Ring Out port.ro Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.14 |
superStackHubRoNsrtStatusInsertion status for this Ring Out port.ro Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.15 |
superStackHubRoBcnRemStatusThis parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition.ro Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.16 |
superStackHubCascadeUpMaskAdministrative status for this Cascade Up connection. By setting this parameter, a remote manager can control the partitioning of this port.rw Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.17 |
superStackHubCascadeUpPhDetThis parameter describes the phantom detect status for this Cascade Up connection.ro Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.18 |
superStackHubCascadeUpNsrtStatusInsertion status for this Cascade Up connection.ro Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.19 |
superStackHubCascadeUpBcnRemStatusThis parameter describes the result of any automatic beacon removal operations performed by the agent on this connection. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition.ro Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.20 |
superStackHubCascadeDownMaskAdministrative status for this Cascade Down connection. By setting this parameter, a remote manager can control the partitioning of this port.rw Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.21 |
superStackHubCascadeDownPhDetThis parameter describes the phantom detect status for this Cascade Down connection.ro Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.22 |
superStackHubCascadeDownNsrtStatusInsertion status for this Cascade Down connection.ro Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.23 |
superStackHubCascadeDownBcnRemStatusThis parameter describes the result of any automatic beacon removal operations performed by the agent on this connection. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition.ro Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.24 |
superStackHubDataRateStateThis parameter indicates the current data rate of this unit.rw Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.25 |
superStackHubDeviceTimeStampThe time the data rate status (was) last changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.260.1.3.2.2.1.26 |
superStackHubMgmtStatusThe operational status of this unit.ro Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.27 |
superStackHubProxyAgentIDThe physical layer MAC Address of the agent.ro OCTET STRING .1.3.6.1.4.1.260.1.3.2.2.1.28 |
superStackHubAttachedAgentTypeThe type of the attached agent.ro Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.29 |
superStackHubAttachedAgentStateThe state of the attached agent.ro Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.30 |
superStackHubAttachedAgentControlThis parameter allows control of the agent. Disabling the agent causes it to stop communicating (via the cascade) with other devices but it still allows for insertion of the MAC. The enable/isolate-MAC-insertion commands cause the agents MAC to be inserted or looped back respectively. this unit.rw Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.31 |
superStackHubTemperatureStatusThe temperature status of this unit.ro Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.32 |
superStackHubPowerStatusThe power status of this unit.ro Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.33 |
superStackHubAutoRecovControlThis parameter controls the auto recovery operation of this unit.rw Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.34 |
superStackHubAutoRecovRetriesThe number of Auto Recoveries performed by this unit.rw INTEGER .1.3.6.1.4.1.260.1.3.2.2.1.35 |
superStackHubCodeVersionThe firmware version number of this unit.ro OCTET STRING .1.3.6.1.4.1.260.1.3.2.2.1.36 |
superStackHubAutoRecovStateThe current auto recovery state of this unit.ro Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.37 |
superStackHubRawCommandDataThis is used to send raw 485 serial data to this unit.rw OCTET STRING .1.3.6.1.4.1.260.1.3.2.2.1.38 |
superStackHubAutoRecovModeThis parameter describes the auto recovery mode.rw Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.39 |
superStackHubRouterPortPhDetPhantom current status for the router port on rear. A value of 1 corresponds to no phantom current detected. A value of 2 corresponds to phantom presence.ro Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.40 |
superStackHubRouterPortMaskAdministrative status for the router port on rear. By setting this parameter, a remote manager can control access to the lobe port.rw Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.41 |
superStackHubRouterPortNsrtStatusActual insertion status for the router port on rear. A 1 value means that the corresponding station is not connected to the ring. A 2 value means that the corresponding station is connected to the ring.ro Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.42 |
superStackHubRouterPortMacAddrThe MAC layer address of the station which is attached to the router port on rear.ro OCTET STRING .1.3.6.1.4.1.260.1.3.2.2.1.43 |
superStackHubRouterPortBcnRemStatusThis parameter describes the result of any automatic beacon removal operations performed by the agent on the router port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition.ro Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.44 |
superStackHubRouterPortBcnRemCauseThis parameter describes the cause of any automatic beacon removal operations performed by the agent on this port.ro Enumeration .1.3.6.1.4.1.260.1.3.2.2.1.45 |
superStackHubLobeNumberThe number of items in the hub lobe table.ro INTEGER .1.3.6.1.4.1.260.1.3.2.3 |
superStackHubLobeTableA table which contains the control and status information for the lobes. SEQUENCE OF SuperStackHubLobeEntry .1.3.6.1.4.1.260.1.3.2.4 |
superStackHubLobeEntryA collection of control and status parameters kept for each lobe. SuperStackHubLobeEntry .1.3.6.1.4.1.260.1.3.2.4.1 |
superStackHubIndexThe index into the superStackHubTable of the mau this lobe is on.ro INTEGER .1.3.6.1.4.1.260.1.3.2.4.1.1 |
superStackHubLobePortThe port of the mau this lobe is on.ro INTEGER .1.3.6.1.4.1.260.1.3.2.4.1.2 |
superStackHubLobeConfigThe hardware configuration of the port.ro Enumeration .1.3.6.1.4.1.260.1.3.2.4.1.3 |
superStackHubLobePhDetPhantom current status for this lobe port. A value of 1 corresponds to no phantom current detected. A value of 2 corresponds to phantom presence.ro Enumeration .1.3.6.1.4.1.260.1.3.2.4.1.4 |
superStackHubLobeMaskAdministrative status for this lobe port. By setting this parameter, a remote manager can control access to the lobe port.rw Enumeration .1.3.6.1.4.1.260.1.3.2.4.1.5 |
superStackHubLobeNsrtStatusActual insertion status for this lobe port. A 1 value means that the corresponding station is not connected to the ring. A 2 value means that the corresponding station is connected to the ring.ro Enumeration .1.3.6.1.4.1.260.1.3.2.4.1.6 |
superStackHubLobeMacAddrThe MAC layer address of the station which is attached to the corresponding lobe port.ro OCTET STRING .1.3.6.1.4.1.260.1.3.2.4.1.7 |
superStackHubLobeBcnRemStatusThis parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition.ro Enumeration .1.3.6.1.4.1.260.1.3.2.4.1.8 |
superStackHubLobeBcnRemCauseThis parameter describes the cause of any automatic beacon removal operations performed by the agent on this port.ro Enumeration .1.3.6.1.4.1.260.1.3.2.4.1.9 |
maintenance OBJECT IDENTIFIER .1.3.6.1.4.1.260.2 |
managers OBJECT IDENTIFIER .1.3.6.1.4.1.260.2.1 |
mgrNumberThe number of managers in the manager table.ro INTEGER .1.3.6.1.4.1.260.2.1.1 |
mgrAutoAddThis variable indicates whether any manager that communicates with the agent should be added to the manager table.rw Enumeration .1.3.6.1.4.1.260.2.1.2 |
mgrAutoAgeWhen mgrAutoAdd is enabled, this variable then indicates whether manager entries should be deleted after 'mgrAgeInterval' ticks. This variable has no effect when mgrAutoAdd is disabled.rw Enumeration .1.3.6.1.4.1.260.2.1.3 |
mgrAgeIntervalThis is the aging interval.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.260.2.1.4 |
mgrTableA list of managers. SEQUENCE OF MgrEntry .1.3.6.1.4.1.260.2.1.5 |
mgrEntryA manager entry. MgrEntry .1.3.6.1.4.1.260.2.1.5.1 |
mgrIndexThe Index number of the Manager Entry.rw INTEGER .1.3.6.1.4.1.260.2.1.5.1.1 |
mgrIpAddrThe IP address of the manager.rw IpAddress .1.3.6.1.4.1.260.2.1.5.1.2 |
mgrCommunityThe Community of the manager.rw DisplayString .1.3.6.1.4.1.260.2.1.5.1.3 |
mgrTimeStampTime of last communication with the manager.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.260.2.1.5.1.4 |
mgrStatusThe Status of this Entry.rw Enumeration .1.3.6.1.4.1.260.2.1.5.1.5 |
mgrPhysAddrThe physical address of the manager entry.rw OCTET STRING .1.3.6.1.4.1.260.2.1.5.1.6 |
mgrInterfaceIndexThe Interface Index of the manager entry.rw INTEGER .1.3.6.1.4.1.260.2.1.5.1.7 |
versions OBJECT IDENTIFIER .1.3.6.1.4.1.260.2.2 |
versionHardwareThe Version of hardware release.ro OCTET STRING .1.3.6.1.4.1.260.2.2.1 |
versionEPROMFirmwareThe Version of EPROM release.ro OCTET STRING .1.3.6.1.4.1.260.2.2.2 |
versionFLASHFirmwareThe Version of FLASH release.ro OCTET STRING .1.3.6.1.4.1.260.2.2.3 |
configuration OBJECT IDENTIFIER .1.3.6.1.4.1.260.2.3 |
configEPROMSizeThe Quantity of EPROM installed (number of bytes).ro INTEGER .1.3.6.1.4.1.260.2.3.1 |
configFLASHSizeThe Quantity of FLASH installed (number of bytes).ro INTEGER .1.3.6.1.4.1.260.2.3.2 |
configFLASHCountThe Quantity of FLASH installed (number of ICs).ro INTEGER .1.3.6.1.4.1.260.2.3.3 |
configDRAMSizeThe Quantity of DRAM installed (number of bytes).ro INTEGER .1.3.6.1.4.1.260.2.3.4 |
configDRAMCountThe Quantity of DRAM installed (number of SIMMs).ro INTEGER .1.3.6.1.4.1.260.2.3.5 |
configRS232NumberThe Number of RS-232 ports in the RS-232 port table.ro INTEGER .1.3.6.1.4.1.260.2.3.6 |
configRS232PortTableA list of port entries. The number of entries is given by the value of configRS232Number. SEQUENCE OF ConfigRS232PortEntry .1.3.6.1.4.1.260.2.3.7 |
configRS232PortEntryStatus and parameter values for a port. ConfigRS232PortEntry .1.3.6.1.4.1.260.2.3.7.1 |
configRS232PortIndexA unique value for each port.ro INTEGER .1.3.6.1.4.1.260.2.3.7.1.1 |
configRS232PortNameA text description of the port, i.e. COM1.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.260.2.3.7.1.2 |
configRS232BaudRateThe baudrate at which the port is operating.rw Enumeration .1.3.6.1.4.1.260.2.3.7.1.3 |
configRS232ModemStatusThe current status of the modem port connection.ro Enumeration .1.3.6.1.4.1.260.2.3.7.1.4 |
configRS232ConnectionStatusThe current status of the modem data connection.ro Enumeration .1.3.6.1.4.1.260.2.3.7.1.5 |
configRS232ModemConfigStringA user-configurable ASCII string used to initialize a modem on this port. If this string is set to Z, the Star-Tek Agent sends ATZ<CR> to the modem during configuration.rw DisplayString .1.3.6.1.4.1.260.2.3.7.1.6 |
configRS232OutputDataRaw data to be sent out this port. Data can only be sent if the ConnectionStatus is connectionWait.rw OCTET STRING .1.3.6.1.4.1.260.2.3.7.1.7 |
configRS232InputDataThe response, if any, to the output data.ro OCTET STRING .1.3.6.1.4.1.260.2.3.7.1.8 |
configRS232HardwareFlowControlControls the use of RTS-CTS hardware flow control during modem connections.rw Enumeration .1.3.6.1.4.1.260.2.3.7.1.9 |
configMonitorModeThe mode of operation of the monitor port. The monitor port is COM2 (if present, COM1 if not).rw Enumeration .1.3.6.1.4.1.260.2.3.8 |
configMonitorInputControls whether the monitor function will accept input.rw Enumeration .1.3.6.1.4.1.260.2.3.9 |
configMonitorDiagsControls whether the monitor function will produce diagnostic output.rw Enumeration .1.3.6.1.4.1.260.2.3.10 |
configParseControlControls the degree to which frames are copied and parsed. Under high network loads this control can be used to prevent agent overload.rw Enumeration .1.3.6.1.4.1.260.2.3.11 |
configBootSourceDescribes where the agent is executing code from.ro Enumeration .1.3.6.1.4.1.260.2.3.12 |
security OBJECT IDENTIFIER .1.3.6.1.4.1.260.2.4 |
securityControlThis controls whether security is enabled or disabled.rw Enumeration .1.3.6.1.4.1.260.2.4.1 |
securityMacAddressTableA table which maintains a list of MacAddresses which are from the local ring, along with a control field which specifies whether it is allowed or disallowed access to the local ring and a counter which tracks the number of times that address has been disallowed access to the ring. SEQUENCE OF SecurityMacAddressTableEntry .1.3.6.1.4.1.260.2.4.2 |
securityMacAddressTableEntryAn entry in the securityMacAddressTable. SecurityMacAddressTableEntry .1.3.6.1.4.1.260.2.4.2.1 |
securityMacAddressThe Token Ring Mac Address for this entry.rw OCTET STRING .1.3.6.1.4.1.260.2.4.2.1.1 |
securityStatusSpecifies whether this address is allowed or disallowed to be on the local ring.rw Enumeration .1.3.6.1.4.1.260.2.4.2.1.2 |
securityLockoutCountThe number of times this address was disallowed on the local ring.ro Counter .1.3.6.1.4.1.260.2.4.2.1.3 |
recovery OBJECT IDENTIFIER .1.3.6.1.4.1.260.2.5 |
recoveryControlThis variable controls whether or not this agent will Accelerate the token-ring recovery process. Enabled by default.rw Enumeration .1.3.6.1.4.1.260.2.5.1 |
recovery828SupportThis variable controls whether this agent will perform Accelerated Recovery on model 828 devices. Disabled by default.rw Enumeration .1.3.6.1.4.1.260.2.5.2 |
recoveryRetryLimitThis variable controls the maximum number of Accelerated Recovery events that will be attempted within recoveryRetryTimePeriod seconds of each other.rw INTEGER .1.3.6.1.4.1.260.2.5.3 |
recoveryRetryTimePeriodThe number of seconds which must elapse between Recovery events in order for them to be considered non-related and non-limited.rw INTEGER .1.3.6.1.4.1.260.2.5.4 |
rmonextns OBJECT IDENTIFIER .1.3.6.1.4.1.260.4 |
stationstatistics OBJECT IDENTIFIER .1.3.6.1.4.1.260.4.1 |
stationhistory OBJECT IDENTIFIER .1.3.6.1.4.1.260.4.2 |
trHistoryTableA list of Token Ring history entries. SEQUENCE OF TrHistoryEntry .1.3.6.1.4.1.260.4.2.1 |
trHistoryEntryAn historical sample of Token Ring statistics on a particular Token Ring interface (on a per station basis). This sample is associated with the historyControlEntry which set up the parameters for a regular collection of these samples. TrHistoryEntry .1.3.6.1.4.1.260.4.2.1.1 |
trHistoryIndexThe history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of historyControlIndex.ro INTEGER .1.3.6.1.4.1.260.4.2.1.1.1 |
trHistorySampleIndexAn index that uniquely identifies the particular sample this entry represents among all samples associated with the same historyControlEntry. This index starts at 1 and increases by one as each new sample is taken.ro INTEGER .1.3.6.1.4.1.260.4.2.1.1.2 |
trHistoryIntervalStartThe value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require the probe to delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample which is currently being collected is not accessible in this table until the end of its interval.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.260.4.2.1.1.3 |
trHistoryInPktsThe number of packets (including error packets) received by this station, during this sampling interval.ro Counter .1.3.6.1.4.1.260.4.2.1.1.4 |
trHistoryOutPktsThe number of packets (including error packets) transmitted by this station, during this sampling interval.ro Counter .1.3.6.1.4.1.260.4.2.1.1.5 |
trHistoryInOctetsThe total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets) by this station, during this sampling interval.ro Counter .1.3.6.1.4.1.260.4.2.1.1.6 |
trHistoryOutOctetsThe total number of octets of data (including those in bad packets) transmitted on the network (excluding framing bits but including FCS octets) by this station, during this sampling interval.ro Counter .1.3.6.1.4.1.260.4.2.1.1.7 |
trHistoryOutBroadcastPktsThe total number of good packets transmitted on the network that were directed to the broadcast address by this station, during this sampling interval.ro Counter .1.3.6.1.4.1.260.4.2.1.1.8 |
trHistoryOutMulticastPktsThe total number of good packets transmitted on the network that were directed to a multicast address by this station, during this sampling interval. Note that this number does not include packets addressed to the broadcast address.ro Counter .1.3.6.1.4.1.260.4.2.1.1.9 |
trHistoryClaimTokenPktsThe total number of Claim Token MAC packets detected by this station during this sampling interval.ro Counter .1.3.6.1.4.1.260.4.2.1.1.10 |
trHistoryInLineErrorsThe total number of line errors reported by this station in error reporting packets detected by the probe during this sampling interval.ro Counter .1.3.6.1.4.1.260.4.2.1.1.11 |
trHistoryOutLineErrorsThe total number of line errors reported in error reporting packets sent by the nearest active downstream neighbor of this station and detected by the probe during this sampling interval.ro Counter .1.3.6.1.4.1.260.4.2.1.1.12 |
trHistoryInternalErrorsThe total number of adapter internal errors reported by this station in error reporting packets detected by the probe during this sampling interval.ro Counter .1.3.6.1.4.1.260.4.2.1.1.13 |
trHistoryInBurstErrorsThe total number of burst errors reported by this station in error reporting packets detected by the probe during this sampling interval.ro Counter .1.3.6.1.4.1.260.4.2.1.1.14 |
trHistoryOutBurstErrorsThe total number of burst errors reported in error reporting packets sent by the nearest active downstream neighbor of this station and detected by the probe, during this sampling interval.ro Counter .1.3.6.1.4.1.260.4.2.1.1.15 |
trHistoryACErrorsThe total number of AC (Address Copied) errors reported in error reporting packets sent by the nearest active downstream neighbor of this station and detected by the probe during this sampling interval.ro Counter .1.3.6.1.4.1.260.4.2.1.1.16 |
trHistoryAbortErrorsThe total number of abort delimiters reported by this station in error reporting packets detected by the probe during this sampling interval.ro Counter .1.3.6.1.4.1.260.4.2.1.1.17 |
trHistoryLostFrameErrorsThe total number of lost frame errors reported by this station in error reporting packets detected by the probe during this sampling interval.ro Counter .1.3.6.1.4.1.260.4.2.1.1.18 |
trHistoryCongestionErrorsThe total number of receive congestion errors reported by this station in error reporting packets detected by the probe during this sampling interval.ro Counter .1.3.6.1.4.1.260.4.2.1.1.19 |
trHistoryFrameCopiedErrorsThe total number of frame copied errors reported by this station in error reporting packets detected by the probe during this sampling interval.ro Counter .1.3.6.1.4.1.260.4.2.1.1.20 |
trHistoryFrequencyErrorsThe total number of frequency errors reported by this station in error reporting packets detected by the probe during this sampling interval.ro Counter .1.3.6.1.4.1.260.4.2.1.1.21 |
trHistoryTokenErrorsThe total number of token errors reported by this station in error reporting packets detected by the probe during this sampling interval.ro Counter .1.3.6.1.4.1.260.4.2.1.1.22 |
trHistoryInBeaconErrorsThe total number of beacon frames sent by this station and detected by the probe, during this sampling interval.ro Counter .1.3.6.1.4.1.260.4.2.1.1.23 |
trHistoryOutBeaconErrorsThe total number of beacon frames detected by the probe, that name this station as the NAUN, during this sampling interval.ro Counter .1.3.6.1.4.1.260.4.2.1.1.24 |
trHistoryInsertionsThe number of times the probe detected this station inserting onto the ring during this sampling interval.ro Counter .1.3.6.1.4.1.260.4.2.1.1.25 |
trHistorySoftErrorsThe number of soft errors reported by this station in error reporting packets detected by the probe during this sampling interval.ro Counter .1.3.6.1.4.1.260.4.2.1.1.26 |
trHistoryOpaqueTableA list of Token Ring history entries. SEQUENCE OF TrHistoryOpaqueEntry .1.3.6.1.4.1.260.4.2.2 |
trHistoryOpaqueEntryAn historical sample of Token Ring statistics on a particular Token Ring interface. This sample is associated with the historyControlEntry which set up the parameters for a regular collection of these samples. TrHistoryOpaqueEntry .1.3.6.1.4.1.260.4.2.2.1 |
trHistoryTableDataAn opaque data structure used for management.ro Opaque .1.3.6.1.4.1.260.4.2.2.1.1 |
protocolstatistics OBJECT IDENTIFIER .1.3.6.1.4.1.260.4.3 |
protocolDataAn opaque data structure used for data retrival.ro Opaque .1.3.6.1.4.1.260.4.3.1 |
protocolStatsTableA list of protocol statistics entries. SEQUENCE OF ProtocolStatsEntry .1.3.6.1.4.1.260.4.3.2 |
protocolStatsEntryAn entry in the protocolStatsTable. ProtocolStatsEntry .1.3.6.1.4.1.260.4.3.2.1 |
protocolIfIndexThe value of this object uniquely identifies the interface on this remote network monitoring device on which this station was detected. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifindex object, defined in [4,6].ro INTEGER .1.3.6.1.4.1.260.4.3.2.1.1 |
protocolIDThe value of this object uniquely identifies the protocol whose counters are tracked by this table entry.ro Enumeration .1.3.6.1.4.1.260.4.3.2.1.2 |
protocolPktsThe number of packets received for this protocol.ro Counter .1.3.6.1.4.1.260.4.3.2.1.3 |
protocolOctetsThe number of octets received for this protocol.ro Counter .1.3.6.1.4.1.260.4.3.2.1.4 |