SRAP-WCM-MIB
AI MIB Summary
The SRAP-WCM-MIB enables SNMP-based remote management and monitoring of 3Com Wireless LAN access points and controllers specifically for web configuration parameters, including session states, radio interface statistics, and authentication status. This module facilitates the retrieval of operational metrics and the execution of configuration changes for the device's web management interface without requiring direct CLI or GUI access.
The 3COM Wireless LAN Products Web Configuration Management MIB Module.
Main OID:
srAPWCMMIBModule.1.3.6.1.4.1.43.35.1.1.5
173
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
173 total| Object Name |
|---|
radioTransmitStopThe radio has stopped transmitting due to a fault. There may be a jammed channel.
The user should change the AP to the different channel or check if there is a RF hardware issue. NOTIFICATION-TYPE .1.3.6.1.4.1.43.0.95 |
radioReceiveStopThe radio has stopped receiving due to a fault. There may be a jammed channel.
The user should change the AP to the different channel or check if there is a RF hardware issue. NOTIFICATION-TYPE .1.3.6.1.4.1.43.0.96 |
exceedMaxAssociatedExceed max 256 Associated clients. No more association of wireless clients allowed.
The user can disassociate the idle wirless clients. NOTIFICATION-TYPE .1.3.6.1.4.1.43.0.97 |
exceedtThresholdAssociatedThe number of Wireless Clients association reaches the threshold of the AP.
Please check the MIB object, thresholdAssociated. The default is 200.
The number of wireless client is more than the value of thresholdAssociated.
This will affect the performace of the AP. NOTIFICATION-TYPE .1.3.6.1.4.1.43.0.98 |
dslSecurityViolationFor Wireless Client, User name or password is not correct in Dynamic Security Link database of AP.
The user can check the AP admin if the account exists on the Dynamic Security Link database NOTIFICATION-TYPE .1.3.6.1.4.1.43.0.99 |
srAPWCMMIBModuleThe 3COM Wireless LAN Products Web Configuration Management MIB Module. MODULE-IDENTITY .1.3.6.1.4.1.43.35.1.1.5 |
wcmMIB OBJECT IDENTIFIER .1.3.6.1.4.1.43.35.1.7.1 |
wcmConf OBJECT IDENTIFIER .1.3.6.1.4.1.43.35.1.7.1.1 |
apConfigMgmtGroups OBJECT IDENTIFIER .1.3.6.1.4.1.43.35.1.7.1.1.1 |
apPerformMgmtGroups OBJECT IDENTIFIER .1.3.6.1.4.1.43.35.1.7.1.1.2 |
apFaultMgmtGroups OBJECT IDENTIFIER .1.3.6.1.4.1.43.35.1.7.1.1.3 |
apSecurityMgmtGroups OBJECT IDENTIFIER .1.3.6.1.4.1.43.35.1.7.1.1.4 |
apEventGroups OBJECT IDENTIFIER .1.3.6.1.4.1.43.35.1.7.1.1.5 |
wcmObjs OBJECT IDENTIFIER .1.3.6.1.4.1.43.35.1.7.1.2 |
apConfigMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.43.35.1.7.1.2.1 |
apManufactureInfo OBJECT IDENTIFIER .1.3.6.1.4.1.43.35.1.7.1.2.1.1 |
apModelnumberThe Model Number of the ACCESS Point device.ro OCTET STRING .1.3.6.1.4.1.43.35.1.7.1.2.1.1.1 |
apSerialnumberThe Serial Number of the ACCESS Point system.ro OCTET STRING .1.3.6.1.4.1.43.35.1.7.1.2.1.1.2 |
apMyMacAddrThe MAC address of the ACCESS Point.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.43.35.1.7.1.2.1.1.3 |
apFirmwareVerThe current version of the ACCESS Point firmware.ro OCTET STRING .1.3.6.1.4.1.43.35.1.7.1.2.1.1.4 |
apWebUiVerThe current version of the ACCESS Point WEB Configration System.ro OCTET STRING .1.3.6.1.4.1.43.35.1.7.1.2.1.1.5 |
apMfgDateThe Date of this ACCESS Point was manufactured.ro OCTET STRING .1.3.6.1.4.1.43.35.1.7.1.2.1.1.6 |
apProductNameThe Product Name of this ACCESS Point.ro OCTET STRING .1.3.6.1.4.1.43.35.1.7.1.2.1.1.7 |
apMfgNameThe Manufacture Name of this ACCESS Point.ro OCTET STRING .1.3.6.1.4.1.43.35.1.7.1.2.1.1.8 |
apHardwareRevThe Hardware Revision of this ACCESS Point.ro INTEGER .1.3.6.1.4.1.43.35.1.7.1.2.1.1.9 |
apSystemConfig OBJECT IDENTIFIER .1.3.6.1.4.1.43.35.1.7.1.2.1.2 |
apDeviceNameAn ASCII string to identify the Device Name of this ACCESS Point (up to
255 characters).rw OCTET STRING .1.3.6.1.4.1.43.35.1.7.1.2.1.2.1 |
apDeviceLocAn ASCII string to identify the Location of this ACCESS Point (up to
255 characters).rw OCTET STRING .1.3.6.1.4.1.43.35.1.7.1.2.1.2.2 |
apHelpFilePathAn ASCII string to identify the Location of this ACCESS Point (up to
255 characters).rw OCTET STRING .1.3.6.1.4.1.43.35.1.7.1.2.1.2.3 |
apMyIPAddrThe IP address for the Access Point.
It can be set when apStaticIPAddrEnable is set to is enabled.rw IpAddress .1.3.6.1.4.1.43.35.1.7.1.2.1.2.4 |
apSubnetMaskThe subnet mask for the Access Point.
It can be set when apStaticIPAddrEnable is set to enabled.rw IpAddress .1.3.6.1.4.1.43.35.1.7.1.2.1.2.5 |
apGatewayIPAddrThe IP address of the gateway for the Access Point.rw IpAddress .1.3.6.1.4.1.43.35.1.7.1.2.1.2.6 |
apAdditionalGatewaysTableLengthThe maximum number of entries in the Additional Gateways Table.ro Integer32 .1.3.6.1.4.1.43.35.1.7.1.2.1.2.7 |
apAdditionalGatewaysTableA table of information for additional Gateways.
The current number of entries is 4(that mean aditional gateway is 3). SEQUENCE OF ApAdditionalGatewaysEntry .1.3.6.1.4.1.43.35.1.7.1.2.1.2.8 |
apAdditionalGatewaysEntryAn entry in the table of information for additional
gateways for this ACCESS Point.
A row in this table cannot be created or deleted by
SNMP operations on columns of the table. ApAdditionalGatewaysEntry .1.3.6.1.4.1.43.35.1.7.1.2.1.2.8.1 |
additionalGatewaysIndexSpecific Gateway information Table index.
Range (1..3). INTEGER .1.3.6.1.4.1.43.35.1.7.1.2.1.2.8.1.1 |
apAdditionalGatewaysIPAddrThe IP address of the Gateway used for this Access Point.rw IpAddress .1.3.6.1.4.1.43.35.1.7.1.2.1.2.8.1.2 |
apDHCPEnableEnables/Disables Wireless DHCP mode for the Access Point.
Default is disabled(2).rw Enumeration .1.3.6.1.4.1.43.35.1.7.1.2.1.2.9 |
apStaticIPAddrEnableEnables/Disables Static IP of ACCESS Point .
Default is disabled(2). Before issuing this command, set 'apMyIPAddr',
'apSubnetMask', and 'apGatewayIPAddr' to the proper values.rw Enumeration .1.3.6.1.4.1.43.35.1.7.1.2.1.2.10 |
apSNMPInfo OBJECT IDENTIFIER .1.3.6.1.4.1.43.35.1.7.1.2.1.3 |
apSNMPRequestsIndicates the number of SNMP requests to
this SNMP Agent.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.1.3.1 |
apSNMPTrapsIndicates the number of Traps that were generated
by this SNMP Agent.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.1.3.2 |
apAllTrapsEnableEnables/Disables all SNMP traps. Default is enabled(1).rw Enumeration .1.3.6.1.4.1.43.35.1.7.1.2.1.3.3 |
apColdBootTrapEnableEnables/Disables ACCESS Point Cold Boot trap. Default
is allTrapHosts(4). This is a generic-trap and the trap
code is 0.
When not disabled the trap could be directed to TrapHost1,
TrapHost2 or all TrapHosts.
The apAllTrapsEnable mib variable should be enabled for this trap
to be issued.rw Enumeration .1.3.6.1.4.1.43.35.1.7.1.2.1.3.4 |
apAuthenFailureTrapEnableEnables/Disables authentication failure trap. Default
is allTrapHosts(4). This is a generic-trap and the trap
code is 4.
When not disabled the trap could be directed to TrapHost1,
TrapHost2 or all TrapHosts.
The apAllTrapsEnable mib variable should be enabled for this trap
to be issued.rw Enumeration .1.3.6.1.4.1.43.35.1.7.1.2.1.3.5 |
apRFTrapEnableEnables/Disables ACCESS Point RF driver startup trap.
Default is allTrapHosts(4). This is an a3com enterprise-specific trap.
When not disabled the trap could be directed to TrapHost1,
TrapHost2 or all TrapHosts.
The apAllTrapsEnable mib variable should be enabled for this trap
to be issued.rw Enumeration .1.3.6.1.4.1.43.35.1.7.1.2.1.3.6 |
apWarmBootTrapEnableEnables/Disables Warm Boot trap. Default
is allTrapHosts(4). This is a generic-trap and the trap
code is 0.
When not disabled the trap could be directed to TrapHost1,
TrapHost2 or all TrapHosts.
The apAllTrapsEnable mib variable should be enabled for this trap
to be issued.rw Enumeration .1.3.6.1.4.1.43.35.1.7.1.2.1.3.7 |
apWCMaxAssocTrapEnableEnables/Disables apWCMaxAssoc Trap. Default is allTrapHosts(4).
When not disabled the trap could be directed to TrapHost1,
TrapHost2 or all TrapHosts.
The apAllTrapsEnable mib variable should be enabled for this trap
to be issued.rw Enumeration .1.3.6.1.4.1.43.35.1.7.1.2.1.3.8 |
apThresholdAssociatedEnableEnables/Disables apThresholdAssociated Trap. Default
is allTrapHosts(4).
When not disabled the trap could be directed to TrapHost1,
TrapHost2 or all TrapHosts.
The apAllTrapsEnable mib variable should be enabled for this trap
to be issued.rw Enumeration .1.3.6.1.4.1.43.35.1.7.1.2.1.3.9 |
dslSecurityViolationEnableEnables/Disables dslSecurityViolation Trap. Default
is allTrapHosts(4).
When not disabled the trap could be directed to TrapHost1,
TrapHost2 or all TrapHosts.
The apAllTrapsEnable MIB variable should be enabled for this trap
to be issued.rw Enumeration .1.3.6.1.4.1.43.35.1.7.1.2.1.3.10 |
apRFConfig OBJECT IDENTIFIER .1.3.6.1.4.1.43.35.1.7.1.2.1.4 |
apWlanServiceAreaThe WLAN Service Area of the ACCESS Point.rw OCTET STRING .1.3.6.1.4.1.43.35.1.7.1.2.1.4.1 |
apCountryNameThe country for which the ACCESS Point radio is
configured. It is set at the factory and may not be
altered.ro OCTET STRING .1.3.6.1.4.1.43.35.1.7.1.2.1.4.2 |
apWEPAlgorithmThis attribute is a set of all the shared key WEP algorithms
supported by the STAs. The following are the default values
and the associated algorithm.
Value = 1: open system
Value = 2: 40 bit Key
Value = 3: 128 bit Key
IMPORTANT NOTE: The 128 bit WEP key ENcryption is currently
restricted by U.S. laws.ro Enumeration .1.3.6.1.4.1.43.35.1.7.1.2.1.4.3 |
apShortPreambleThis attribute is a set to enable short preamble for compatibility
within the 802.11 community. Setting it to enabled shall
result in performance enhancement. Default is disabled.rw Enumeration .1.3.6.1.4.1.43.35.1.7.1.2.1.4.4 |
apMaxWCTriggerIndicates the trigger point for sending
apWCMaxAssocTrap trap. Range (1..255)
The default value is 255.rw INTEGER .1.3.6.1.4.1.43.35.1.7.1.2.1.4.5 |
apRadioAutoSenseThis attribute is a set to enable Radio Auto Sense.
Default is enabled.rw Enumeration .1.3.6.1.4.1.43.35.1.7.1.2.1.4.6 |
apRadioChannelThis attribute is Radio Channel.
This attribute can be written when apRadioAutoSense is disabled.rw INTEGER .1.3.6.1.4.1.43.35.1.7.1.2.1.4.7 |
apHighPerformanceThis attribute is a set to enable Radio High Performance.
Default is disabled.rw Enumeration .1.3.6.1.4.1.43.35.1.7.1.2.1.4.8 |
apTransmitPowerThis attribute is a set the transmit power from 1-100 micro watts.rw Enumeration .1.3.6.1.4.1.43.35.1.7.1.2.1.4.9 |
apRadioAntennaThis attribute is a set the section of radio antenna.rw Enumeration .1.3.6.1.4.1.43.35.1.7.1.2.1.4.10 |
thresholdAssociatedThis attribute is a set the threshold of Associated Wireless Client.
The default is 200.rw INTEGER .1.3.6.1.4.1.43.35.1.7.1.2.1.4.11 |
apDataRateMgmtThis attribute is automatically or manually set the best data rate .rw Enumeration .1.3.6.1.4.1.43.35.1.7.1.2.1.4.12 |
apDataRate5This attribute is a set the data rate to 5.5 Mb/sec .rw Enumeration .1.3.6.1.4.1.43.35.1.7.1.2.1.4.13 |
apDataRate11This attribute is a set the data rate to 11.0 Mb/sec .rw Enumeration .1.3.6.1.4.1.43.35.1.7.1.2.1.4.14 |
apPerformMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.43.35.1.7.1.2.2 |
apRFStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.43.35.1.7.1.2.2.1 |
rfTxUcastFrmsThe number of Unicast frames successfully transmitted.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.1.1 |
rfRxUcastFrmsThe number of Unicast frames successfully receivedro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.1.2 |
rfTxBcastFrmsThe number of Broadcast frames transmittedro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.1.3 |
rfRxBcastFrmsThe number of Broadcast frames received.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.1.4 |
rfTxMcastFrmsThe number of Multicast frames transmitted.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.1.5 |
rfRxMcastFrmsThe number of Multicast frames received.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.1.6 |
rfTxEncryptFrmsThe number of Encrypted frames transmitted.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.1.7 |
rfRxEncryptFrmsThe number of Encrypted frames received.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.1.8 |
rfTxFragFrmsThe number of frames fragments transmitted.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.1.9 |
rfRxFragFrmsThe number of frames fragments received.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.1.10 |
rfTxBeaconsThe number of Beacon frames transmitted.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.1.11 |
rfRxBeaconsThe number of Beacon frames received.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.1.12 |
rfTxACKThe number of ACK frames transmitted in response to successfully received frames.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.1.13 |
rfRxACKThe number of frames transmitted that had their corresponding ACK frames successfully received frames.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.1.14 |
rfTxRTSThe number of RTS frames that were successfully transmitted.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.1.15 |
rfRxRTSThe number of RTS received frames.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.1.16 |
rfCTSFailuresThe number of frames for which no CTS frames was received in response to a RTS frames being sent.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.1.17 |
rfRxCTSThe number of CTS frames received in response to a RTS.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.1.18 |
rfTxACKFailuresThe number of frames transmitted that did not have their corresponding ACK packets successfully received.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.1.19 |
rfTxRetrysThe number of frames that were retransmitted.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.1.20 |
rfFCSErrorsThe number of frames received with checksum error.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.1.21 |
rfRxDuplicateFrmsThe number of duplicate frames received.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.1.22 |
rfWEPUndecryptFrmsThe number of frames received with the WEP sub-field of the Frame Control field set to one and the WEPOn value for the key mapped to the TA's MAC address indicates that the frame should not have been encrypted or that frame is discarded due to the receiving STA not implementing the privacy option.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.1.23 |
rfWEPICVErrorsThe number of frames received with the WEP sub-field of the Frame Control field set to one and the value of the ICV as received in the frame does not match the ICV value that is calculated for the contents of the received frame.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.1.24 |
apEtherItfStat OBJECT IDENTIFIER .1.3.6.1.4.1.43.35.1.7.1.2.2.2 |
apEtherPacketsInsIndicates the number of good packets received on the
Ethernet interface.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.2.1 |
apEtherPacketsOutsIndicates the number of packets successfully
transmitted on the Ethernet interface.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.2.2 |
apEtherOctetsInsIndicates the number of good bytes received on the
Ethernet interface.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.2.3 |
apEtherOctetsOutsIndicates the number of bytes successfully transmitted
on the Ethernet interface.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.2.4 |
apEtherPktsInPerSecIndicates the number of good packets per second
received on the Ethernet Interface.ro Gauge32 .1.3.6.1.4.1.43.35.1.7.1.2.2.2.5 |
apEtherPktsOutPerSecIndicates the number of packets per second successfully
transmitted on the Ethernet interface.ro Gauge32 .1.3.6.1.4.1.43.35.1.7.1.2.2.2.6 |
apEtherOctInPerSecIndicates the number of good bytes per second
received on the Ethernet Interface.ro Gauge32 .1.3.6.1.4.1.43.35.1.7.1.2.2.2.7 |
apEtherOctOutPerSecIndicates the number of bytes per second successfully
transmitted on the Ethernet interface.ro Gauge32 .1.3.6.1.4.1.43.35.1.7.1.2.2.2.8 |
apRFItfStat OBJECT IDENTIFIER .1.3.6.1.4.1.43.35.1.7.1.2.2.3 |
apRFFrmsInsIndicates the number of good packets received on the
RF interface.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.3.1 |
apRFFrmsOutsIndicates the number of packets successfully
transmitted on the RF interface.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.3.2 |
apRFOctetsInsIndicates the number of good bytes received on the
RF interface.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.3.3 |
apRFOctetsOutsIndicates the number of bytes successfully transmitted
on the RF interface.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.3.4 |
apRFFrmsInPerSecIndicates the number of good packets per second
received on the RF Interface.ro Gauge32 .1.3.6.1.4.1.43.35.1.7.1.2.2.3.5 |
apRFFrmsOutPerSecIndicates the number of packets per second successfully
transmitted on the RF interface.ro Gauge32 .1.3.6.1.4.1.43.35.1.7.1.2.2.3.6 |
apRFOctInPerSecIndicates the number of good bytes per second
received on the RF Interface.ro Gauge32 .1.3.6.1.4.1.43.35.1.7.1.2.2.3.7 |
apRFOctOutPerSecIndicates the number of bytes per second successfully
transmitted on the RF interface.ro Gauge32 .1.3.6.1.4.1.43.35.1.7.1.2.2.3.8 |
apTrafficMatrix OBJECT IDENTIFIER .1.3.6.1.4.1.43.35.1.7.1.2.2.4 |
apEnetsNPktsToEnetsIndicates the number of packets sent from the Ethernet
Interface the Ethernet Interface. Must be 0ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.4.1 |
apRFNPktsToEnetsIndicates the number of packets sent from the RF
Interface to the Ethernet Interface.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.4.2 |
apEnetsNPktsToRFIndicates the number of packets sent from Ethernet
Interface to the RF Interface.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.4.3 |
apRFNPktsToRFIndicates the number of packets sent from the RF
Interfaceto the RF Interface. Must be 0ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.4.4 |
apDSPerFreqStatTableA table of Radio Per Frequency statistics, which is
based on the historical frequency records used by this
Access Point.
The current number of entries is 78. SEQUENCE OF ApDSPerFreqStatEntry .1.3.6.1.4.1.43.35.1.7.1.2.2.5 |
apDSPerFreqStatEntryAn entry in the table of Radio per frequency
statistics.
A row in this table cannot be created or deleted by
SNMP operations on columns of the table. ApDSPerFreqStatEntry .1.3.6.1.4.1.43.35.1.7.1.2.2.5.1 |
rfDSFrequencyRadio Frequency channel number.ro INTEGER .1.3.6.1.4.1.43.35.1.7.1.2.2.5.1.1 |
rfDSPerFqPktsSentsCounter for the packets sent per frequency.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.5.1.2 |
rfDSPerFqPktsRcvdsCounter for the packets received per frequency.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.5.1.3 |
rfDSPerFqRetriesCounter for the retries per frequency.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.2.5.1.4 |
apFaultMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.43.35.1.7.1.2.3 |
apUpdateTemplateStatusReports the Firmware/HTML file download and
update status.ro Enumeration .1.3.6.1.4.1.43.35.1.7.1.2.3.1 |
apBackupFileNameThe name of the file to be backuped to the TFTP Server.
(Including path name and total up to 255 characters.)rw OCTET STRING .1.3.6.1.4.1.43.35.1.7.1.2.3.2 |
apTemplateOperationstartBackup(1) - Backup the AP configuration through TFTP server.
The AP backup configuration, named as apBackupFileName,
will be saved in the default location of TFTP server.
Before issuing this command, set 'apBackupFileName',
and 'apTFTPServer' to the proper values.
startTemplate(2) - This allows the network management platform
to restore the template configuration of a AP, from one of it's previous backups.
It is expected that common Parameters of AP in the backup configuration file,
named as apRestoreFileName, will be restored to the AP.
Before issuing this command, set 'apRestoreFileName',
and 'apTFTPServer' to the proper values.
startRestore(3) - This allows the network management platform to restore
the full configuration of a AP, from one of it's previous backups.
It is expected that full of the data in the backup configuration file,
named as apRestoreFileName, will be restored to the AP.
Before issuing this command, set 'apRestoreFileName',
and 'apTFTPServer' to the proper values.rw Enumeration .1.3.6.1.4.1.43.35.1.7.1.2.3.3 |
apRestoreFileNameThe name of the file to be restored to the AP.
(Including path name and total up to 255 characters.)rw OCTET STRING .1.3.6.1.4.1.43.35.1.7.1.2.3.4 |
apSyslogDstIpAddressTableLengthThe maximum number of entries in the Syslog Destination Ip Address Table.ro Integer32 .1.3.6.1.4.1.43.35.1.7.1.2.3.5 |
apSyslogDstIpAddressTableA table of Syslog Destination Ip Address.
The current number of entries is 2. SEQUENCE OF ApSyslogDstIpAddressEntry .1.3.6.1.4.1.43.35.1.7.1.2.3.6 |
apSyslogDstIpAddressEntryAn entry in the table of Syslog Destination Ip Address
for this ACCESS Point.
A row in this table cannot be created or deleted by
SNMP operations on columns of the table. ApSyslogDstIpAddressEntry .1.3.6.1.4.1.43.35.1.7.1.2.3.6.1 |
apSyslogDstIpAddressIndexSpecific Syslog Destination Ip Address Table index.
Range (1..2). INTEGER .1.3.6.1.4.1.43.35.1.7.1.2.3.6.1.1 |
apSyslogDstIpAddressThe IP address of Syslog Destination used for this Access Point.rw IpAddress .1.3.6.1.4.1.43.35.1.7.1.2.3.6.1.2 |
apSyslogEnableEnables/Disables syslog for the Access Point.
Default is disabled(2).rw Enumeration .1.3.6.1.4.1.43.35.1.7.1.2.3.7 |
apSecurityMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.43.35.1.7.1.2.4 |
apACLViolationsIndicates the number of Access Control violations
occurred.ro Counter32 .1.3.6.1.4.1.43.35.1.7.1.2.4.1 |
apEAPSupportThe AP supprt the Extensive Authentication Protocol is enabled or disabled.
Default is enabled.rw Enumeration .1.3.6.1.4.1.43.35.1.7.1.2.4.2 |
apAuthServerSupportNumberThe maximum number of entries in the Authenicator Server Table.ro Integer32 .1.3.6.1.4.1.43.35.1.7.1.2.4.3 |
apKeyServerSupportNumberThe maximum number of entries in the Key Server Table.ro Integer32 .1.3.6.1.4.1.43.35.1.7.1.2.4.4 |
apAccountServerSupportNumberThe maximum number of entries in the Accounting Server Table.ro Integer32 .1.3.6.1.4.1.43.35.1.7.1.2.4.5 |
apAuthServerTableA table of information for Authenticator Servers. Now support number of entries is 2. SEQUENCE OF ApAuthServerEntry .1.3.6.1.4.1.43.35.1.7.1.2.4.6 |
apAuthServerEntryAn entry in the table of information for Authenticator Servers for this Access Point. ApAuthServerEntry .1.3.6.1.4.1.43.35.1.7.1.2.4.6.1 |
apAuthServerIndexA number uniquely identifying each Authenticator server. Integer32 .1.3.6.1.4.1.43.35.1.7.1.2.4.6.1.1 |
apAuthServerIPAddrThe IP address of the Authenticator server referred to in this table entry.rw IpAddress .1.3.6.1.4.1.43.35.1.7.1.2.4.6.1.2 |
apAuthServerPortNumberThe UDP port the client is using to send requests to this Authenticator server.rw Integer32 .1.3.6.1.4.1.43.35.1.7.1.2.4.6.1.3 |
apAuthSharedSecretThis values indicates the shared key used by the
authentication server.rw OCTET STRING .1.3.6.1.4.1.43.35.1.7.1.2.4.6.1.4 |
apAuthServerRetransmitThe number of times the access point tries to authenticate logon access.rw Integer32 .1.3.6.1.4.1.43.35.1.7.1.2.4.6.1.5 |
apAuthServerTimeoutThe number of seconds the access point waits for a reply from the RADIUS
server before it resends the requestrw Integer32 .1.3.6.1.4.1.43.35.1.7.1.2.4.6.1.6 |
apKeyServerTableA table of information for Key Servers. Now support number of entries is 2. SEQUENCE OF ApKeyServerEntry .1.3.6.1.4.1.43.35.1.7.1.2.4.7 |
apKeyServerEntryAn entry in the table of information for Key Servers for this Access Point. ApKeyServerEntry .1.3.6.1.4.1.43.35.1.7.1.2.4.7.1 |
apKeyServerIndexA number uniquely identifying each Key server. Integer32 .1.3.6.1.4.1.43.35.1.7.1.2.4.7.1.1 |
apKeyServerIPAddrThe IP address of the Key server referred to in this table entry.rw IpAddress .1.3.6.1.4.1.43.35.1.7.1.2.4.7.1.2 |
apKeyServerPortNumberThe UDP port the client is using to send requests to this server.rw Integer32 .1.3.6.1.4.1.43.35.1.7.1.2.4.7.1.3 |
apAccountServerTableA table of information for Account Servers. Now support number of entries is 1. SEQUENCE OF ApAccountServerEntry .1.3.6.1.4.1.43.35.1.7.1.2.4.8 |
apAccountServerEntryAn entry in the table of information for Account Servers for this Access Point. ApAccountServerEntry .1.3.6.1.4.1.43.35.1.7.1.2.4.8.1 |
apAccountServerIndexA number uniquely identifying each Account server. Integer32 .1.3.6.1.4.1.43.35.1.7.1.2.4.8.1.1 |
apAccountServerIPAddrThe IP address of the Account server referred to in this table entry.rw IpAddress .1.3.6.1.4.1.43.35.1.7.1.2.4.8.1.2 |
apAccountServerPortNumberThe UDP port the client is using to send requests to this server.rw Integer32 .1.3.6.1.4.1.43.35.1.7.1.2.4.8.1.3 |
apAccountServerSharedSecretThis values indicates the shared key used by the
accounting server.rw OCTET STRING .1.3.6.1.4.1.43.35.1.7.1.2.4.8.1.4 |
apAccountServerRetransmitThe number of times the access point tries to accounting logon access.rw Integer32 .1.3.6.1.4.1.43.35.1.7.1.2.4.8.1.5 |
apAccountServerTimeoutThe number of seconds the access point waits for a reply from the RADIUS
accounting server before it resends the requestrw Integer32 .1.3.6.1.4.1.43.35.1.7.1.2.4.8.1.6 |
apFastReKeyingThe AP supprt the Fast-rekeying is enabled or disabled.
Default is disabled.rw Enumeration .1.3.6.1.4.1.43.35.1.7.1.2.4.9 |
apTFTPServerPortNumberThe TFTP Server port.rw Integer32 .1.3.6.1.4.1.43.35.1.7.1.2.4.10 |
apTFTPRetriesThe maximum retries number of tftp client in SRAPEErw Integer32 .1.3.6.1.4.1.43.35.1.7.1.2.4.11 |
apTFTPTimeOutIntervalThe maximum time out interval of tftp client in SRAPEErw Integer32 .1.3.6.1.4.1.43.35.1.7.1.2.4.12 |
apEncryptionTableConceptual table for Encryption setting of device SEQUENCE OF APEncryptionEntry .1.3.6.1.4.1.43.35.1.7.1.2.4.13 |
apEncryptionEntryAn Entry (conceptual row) in the Encryption Table
ifIndex - Each IEEE 802.11 interface is represented by an
ifEntry. Interface tables in this MIB module are indexed
by ifIndex. APEncryptionEntry .1.3.6.1.4.1.43.35.1.7.1.2.4.13.1 |
apEncryptionModeThe encryption mode that each IEEE 802.11 Interface(apEncryptionMode.ifIndex) is using.
Value: 1 = No Encryption
2 = 64 bit WEP
3 = 128 bit WEP
4 = 152 bit WEP
5 = TKIP using WPA-PSK
6 = TKIP using WPA-Enterprise
7 = AES using WPA-PSK
8 = AES using WPA-Enterpriserw Enumeration .1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.1 |
apWPAPSKPassPhraseA WPA Pre-Share Key Pass Phrase.rw OCTET STRING .1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.2 |
apWEPDefaultKeyIDThe WEPDefaultKey N currently being used to encrypt datarw INTEGER .1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.3 |
apWEPDefaultKey1A WEP default secret key 1 value.rw OCTET STRING .1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.4 |
apWEPDefaultKey2A WEP default secret key 2 value.rw OCTET STRING .1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.5 |
apWEPDefaultKey3A WEP default secret key 3 value.rw OCTET STRING .1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.6 |
apWEPDefaultKey4A WEP default secret key 4 value.rw OCTET STRING .1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.7 |
wcmEvents OBJECT IDENTIFIER .1.3.6.1.4.1.43.35.1.7.1.3 |
wcmEventsV2 OBJECT IDENTIFIER .1.3.6.1.4.1.43.35.1.7.1.3.0 |