SMC-AGENT-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for SMC-AGENT-MIB.
35
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
35 total| Object Name |
|---|
smc OBJECT IDENTIFIER .1.3.6.1.4.1.202 |
RFC1213-MIB Unknown .1.3.6.1.4.1.202 |
smcDosWs OBJECT IDENTIFIER .1.3.6.1.4.1.202.2 |
smcDosWsPcTypMake and model of the PC. This may have to be entered in the
configuration disk file. It may or may not be detectable via
signature strings in the BIOS.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.202.2.1 |
smcDosWsPcProcThis is a text string showing the processor type and
indicating whether a math coprocessor exists, e.g. '80286
w/math coprocessor'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.202.2.2 |
smcDosWsPcBiosThis is a text signature string identifying the PC bios, e.g.
'Phoenix 80386SX ROM BIOS PLUS Version 1.10'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.202.2.3 |
smcDosWsPcRamThis is a text string listing the PC's ram configuration,
base, EMS, XMS, e.g. '640K base, 1024K EMS, 3072K XMS'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.202.2.4 |
smcDosWsPcDiskThis is a text string listing the PC's disk configuration,
number and size of drives, e.g. '1.25M Fpy, 1.44M Fpy, 79M
HD'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.202.2.5 |
smcDosWsPcVideoThis is a text string listing the PC's video interface type
and monitor type, e.g. 'VGA Color'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.202.2.6 |
smcDosWsPcIoThis is a text string listing the parallel and serial ports
installed on the PC, e.g. 'LPT1, COM1, COM2'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.202.2.7 |
smcDosWsDosVerThis is a text string listing the version of DOS, e.g. 'DOS
3.3'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.202.2.8 |
smcDosWsDrvIdThis is the signature string from the network driver. It is
similar to the string that is displayed by the NetWare server
MONITOR nlm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.202.2.9 |
smcDosWsNicBasIoThis is the I/O base address of the adapter card.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.202.2.10 |
smcDosWsNicIrqThis is the adapter IRQ number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.202.2.11 |
smcDosWsNicRamThis is the adapter card packet ram address.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.202.2.12 |
smcDosWsNodIdThis is the adapter card 48 bit node ID.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.202.2.13 |
smcDosWsIpAdrThis is the IP address of the PC. The agent takes this
information from a configuration disk file. If the PC is also
running a TCP/IP stack, it is up to the installer to specify
in the agent configuration file the same IP address that the
PC's TCP/IP stack has.ro IpAddress .1.3.6.1.4.1.202.2.14 |
smcDosWsCommentThis is a text string which is set from a configuration disk
file that contains comments about the PC that the network
manager feels is meaningful. For example 'Motherboard
replaced 3 times in the last year'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.202.2.15 |
smcDosWsPcDateThis shows the current date set into the PC to alert the
network manager of potential problems with software that
decides configuration currency based on file dates and times.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.202.2.16 |
smcDosWsPcTimeThis shows the current time set into the PC to alert the
network manager of potential problems with software that
decides configuration currency based on file dates and times.
Note that because of polling times this time may be erratic
within a window of a few seconds.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.202.2.17 |
smcDosWsRstThis variable always reports value = 1. Setting it to 2 results
in an adapter reset, after which it will contain value = 1 again.rw INTEGER .1.3.6.1.4.1.202.2.18 |
smcDosWsProtoMixThis text string reports the most frequent transport protocols
and their approximate percentages of traffic load.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.202.2.19 |
smcDosWsRcvPktsNumber of packets received by the workstationro Counter .1.3.6.1.4.1.202.2.20 |
smcDosWsXmtPktsNumber of packets sent by the workstationro Counter .1.3.6.1.4.1.202.2.21 |
smcDosWsDrvSpcTable SEQUENCE OF SmcDosWsDrvSpcEntry .1.3.6.1.4.1.202.2.22 |
smcDosWsDrvSpcEntry SmcDosWsDrvSpcEntry .1.3.6.1.4.1.202.2.22.1 |
smcDosWsDrvSpcIdNumber of Driver Specific entry. 1 for first entry, 2 for second
entry, etc.ro INTEGER .1.3.6.1.4.1.202.2.22.1.1 |
smcDosWsDrvSpcTxtTextual name of driver specific diagnostic counterro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.202.2.22.1.2 |
smcDosWsDrvSpcCntNumeric value of driver specific diagnostic counterro Counter .1.3.6.1.4.1.202.2.22.1.3 |
smcDosWsTrapDestTable SEQUENCE OF SmcDosWsTrapDestEntry .1.3.6.1.4.1.202.2.23 |
smcDosWsTrapDestEntry SmcDosWsTrapDestEntry .1.3.6.1.4.1.202.2.23.1 |
smcDosWsTrapIdNumber of Trap Destination entry. 1 for first entry, 2 for second
entry, etc.ro INTEGER .1.3.6.1.4.1.202.2.23.1.1 |
smcDosWsTrapDstAdrThis is an IP address to which alerts (traps) should be sent when
significant events occur.rw IpAddress .1.3.6.1.4.1.202.2.23.1.2 |
smcDosWsTrapDstProThis is a code indicating the protocol to use when sending alerts.
1 means disabled, i.e. the corresponding smcDosWsTrapDstAdr
variable is not really intended to receive traps. 2 means use
TCP/IP protocol. 3,4,5,6 mean use IPX protocol using Ethernet II,
RAW 802.2, 802.2 SNAP or 802.3 physical layer.rw INTEGER .1.3.6.1.4.1.202.2.23.1.3 |
smcDosWsApiTrapThis is a string set by external applications
which use the PC Agent API to send an SNMP trapro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.202.2.24 |