SLEV2-Security-MIB
AI MIB Summary
The SLEV2-Security-MIB module provides SNMP access to monitor and manage security parameters, including session states, authentication events, and access control lists, for devices running the SLEV2 security software stack. It exposes specific counters and gauges for tracking security policy violations, active threat detection logs, and cryptographic module status to facilitate real-time intrusion detection and compliance auditing.
slev2 security
Main OID:
sleV2Security.1.3.6.1.4.1.6296.102.7
440
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
440 total| Object Name |
|---|
sleV2Securityslev2 security MODULE-IDENTITY .1.3.6.1.4.1.6296.102.7 |
sleV2SecurityBase OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.1 |
sleVSecurity4 OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2 |
sleV2SecurityACL OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5 |
sleV2Security4ACLBase OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5.1 |
sleV2Security4ACLFlow OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5.2 |
sleV2Security4ACLFlowInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5.2.1 |
sleV2Security4ACLFlowTableACL flow table. SEQUENCE OF SleV2Security4ACLFlowEntry .1.3.6.1.4.1.6296.102.7.2.5.2.1.1 |
sleV2Security4ACLFlowEntrykey: sleV2Security4ACLFlowIndex SleV2Security4ACLFlowEntry .1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1 |
sleV2Security4ACLFlowIndexThe index of flowro INTEGER .1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.1 |
sleV2Security4ACLFlowNameThe name of flowro OctetName .1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.2 |
sleV2Security4ACLFlowSrcIpAddrThe IP address to match against the packet's source IP address. The value of 0.0.0.0 means any(not set)ro IpAddress .1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.3 |
sleV2Security4ACLFlowSrcIpAddrMaskThe mask of source IP address The value of -1 means any(not set)ro IntIpAddrMask .1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.4 |
sleV2Security4ACLFlowDstIpAddrThe IP address to match against the packet's destination IP address. The value of 0.0.0.0 means any(not set)ro IpAddress .1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.5 |
sleV2Security4ACLFlowDstIpAddrMaskThe mask of destination IP address The value of -1 means any(not set)ro IntIpAddrMask .1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.6 |
sleV2Security4ACLFlowProtocolTypeThe type of IP protocol The flat internet protocol is from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode If the value is tcp(6), From sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowTcpFlag value is available If the value is udp(17), From sleV2QoS4FlowUdpSrcStartPort to sleV2QoS4FlowUdpDstEndPort value is available If the value is icmp(1), The value of sleV2QoS4FlowIcmpType and sleV2QoS4FlowIcmpCode is available The value of -1 means any(not set) Otherwise, from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode value is not available The value of -1 means any(not set)ro IntProtocolType .1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.7 |
sleV2Security4ACLFlowTcpSrcStartPortThe start source port in range of source port in TCP packet The value of -1 means any(not set)ro IntL4Port .1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.8 |
sleV2Security4ACLFlowTcpSrcEndPortThe end source port in range of source port in TCP packet The value of -1 means any(not set)ro IntL4Port .1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.9 |
sleV2Security4ACLFlowTcpDstStartPortThe start destination port in range of source port in TCP packet. The value of -1 means any(not set)ro IntL4Port .1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.10 |
sleV2Security4ACLFlowTcpDstEndPortThe end destination port in range of destination port in TCP packet. The value of -1 means any(not set)ro IntL4Port .1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.11 |
sleV2Security4ACLFlowTcpFlagThe flag in TCP packetro Bits .1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.12 |
sleV2Security4ACLFlowUdpSrcStartPortThe start source port in range of source port in UDP packet The value of -1 means any(not set)ro IntL4Port .1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.13 |
sleV2Security4ACLFlowUdpSrcEndPortThe end source port in range of source port in UDP packet The value of -1 means any(not set)ro IntL4Port .1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.14 |
sleV2Security4ACLFlowUdpDstStartPortThe start destination port in range of destination port in UDP packet. The value of -1 means any(not set)ro IntL4Port .1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.15 |
sleV2Security4ACLFlowUdpDstEndPortThe end destination port in range of destination port in UDP packet. The value of -1 means any(not set)ro IntL4Port .1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.16 |
sleV2Security4ACLFlowIcmpTypeThe type of ICMP message The value of -1 means any(not set)ro IntIcmpType .1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.17 |
sleV2Security4ACLFlowIcmpCodeThe code of ICMP message The value of -1 means any(not set)ro IntIcmpCode .1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.18 |
sleV2Security4ACLFlowHdrlenThe IP header length. The value of 0 means any(not set)ro INTEGER (0 | 1..15) .1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.19 |
sleV2Security4ACLFlowIpFlagThe any flag of IP address.ro Enumeration .1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.20 |
sleV2SecurityACLFlowInetAddrTypeIP address typero InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.21 |
sleV2SecurityACLFlowSrcInetAddrThe IP address to match against the packet's source IP address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.22 |
sleV2SecurityACLFlowDstInetAddrThe IP address to match against the packet's destination IP address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.23 |
sleV2SecurityACLFlowSrcInetAddrLenThe prefix length of source IP addressro InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.24 |
sleV2SecurityACLFlowDstInetAddrLenThe prefix length of destination IP addressro InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.25 |
sleV2Security4ACLFlowControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5.2.1.2 |
sleV2Security4ACLFlowControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.1 |
sleV2Security4ACLFlowControlStatusThe status of user commandro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.2 |
sleV2Security4ACLFlowControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.3 |
sleV2Security4ACLFlowControlTimeStampThe time stamp of the last command(end of command)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.4 |
sleV2Security4ACLFlowControlReqResultThe result of the last user commandro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.5 |
sleV2Security4ACLFlowControlIndexThe index of flowrw IntFlowIndex .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.6 |
sleV2Security4ACLFlowControlNameThe name of flowrw OctetName .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.7 |
sleV2Security4ACLFlowControlSrcIpAddrThe IP address to match against the packet's source IP address. The value of 0.0.0.0 means any(not set)rw IpAddress .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.8 |
sleV2Security4ACLFlowControlSrcIpAddrMaskThe mask of source IP address The value of -1 means any(not set)rw IntIpAddrMask .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.9 |
sleV2Security4ACLFlowControlDstIpAddrThe IP address to match against the packet's destination IP address. The value of 0.0.0.0 means any(not set)rw IpAddress .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.10 |
sleV2Security4ACLFlowControlDstIpAddrMaskThe mask of destination IP address The value of -1 means any(not set)rw IntIpAddrMask .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.11 |
sleV2Security4ACLFlowControlProtocolTypeThe type of IP protocol The flat internet protocol is from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode If the value is tcp(6), From sleV2QoS4FlowControlTcpSrcStartPort to sleV2QoS4FlowControlTcpFlag value is available If the value is udp(17), From sleV2QoS4FlowControlUdpSrcStartPort to sleV2QoS4FlowControlUdpDstEndPort value is available If the value is icmp(1), The value of sleV2QoS4FlowControlIcmpType and sleV2QoS4FlowControlIcmpCode is available The value of -1 means any(not set) Otherwise, from sleV2QoS4FlowControlTcpSrcStartPort to sleV2QoS4FlowControlIcmpCode value is not available The value of -1 means any(not set)rw IntProtocolType .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.12 |
sleV2Security4ACLFlowControlTcpSrcStartPortThe start source port in range of source port in TCP packet The value of -1 means any(not set)rw IntL4Port .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.13 |
sleV2Security4ACLFlowControlTcpSrcEndPortThe end source port in range of source port in TCP packet The value of -1 means any(not set)rw IntL4Port .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.14 |
sleV2Security4ACLFlowControlTcpDstStartPortThe start destination port in range of source port in TCP packet. The value of -1 means any(not set)rw IntL4Port .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.15 |
sleV2Security4ACLFlowControlTcpDstEndPortThe end destination port in range of destination port in TCP packet. The value of -1 means any(not set)rw IntL4Port .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.16 |
sleV2Security4ACLFlowControlTcpFlagThe flag in TCP packetrw Bits .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.17 |
sleV2Security4ACLFlowControlUdpSrcStartPortThe start source port in range of source port in UDP packet The value of -1 means any(not set)rw IntL4Port .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.18 |
sleV2Security4ACLFlowControlUdpSrcEndPortThe end source port in range of source port in UDP packet The value of -1 means any(not set)rw IntL4Port .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.19 |
sleV2Security4ACLFlowControlUdpDstStartPortThe start destination port in range of destination port in UDP packet. The value of -1 means any(not set)rw IntL4Port .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.20 |
sleV2Security4ACLFlowControlUdpDstEndPortThe end destination port in range of destination port in UDP packet. The value of -1 means any(not set)rw IntL4Port .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.21 |
sleV2Security4ACLFlowControlIcmpTypeThe type of ICMP message The value of -1 means any(not set)rw IntIcmpType .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.22 |
sleV2Security4ACLFlowControlIcmpCodeThe code of ICMP message The value of -1 means any(not set)rw IntIcmpCode .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.23 |
sleV2Security4ACLFlowControlHdrlenThe IP header length The value of 0 means any(not set)rw INTEGER (0 | 1..15) .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.24 |
sleV2Security4ACLFlowControlIpFlagThe any flag of IP address.rw Enumeration .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.25 |
sleV2SecurityACLFlowControlInetAddrTypeIP address typerw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.26 |
sleV2SecurityACLFlowControlSrcInetAddrThe IP address to match against the packet's source IP address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.27 |
sleV2SecurityACLFlowControlDstInetAddrThe IP address to match against the packet's destination IP address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.28 |
sleV2SecurityACLFlowControlSrcInetAddrLenThe prefix length of source IP addressrw InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.29 |
sleV2SecurityACLFlowControlDstInetAddrLenThe prefix length of destination IP addressrw InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.6296.102.7.2.5.2.1.2.30 |
sleV2Security4ACLFlowNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5.2.1.3 |
sleACLFlowCreatedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.5.2.1.3.1 |
sleACLFlowChangedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.5.2.1.3.2 |
sleACLFlowDestroyedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.5.2.1.3.3 |
sleACLFlowAllDestroyedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.5.2.1.3.4 |
sleACLFlowExCreatedcreateACLFlowEx NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.5.2.1.3.5 |
sleACLFlowExChangedsetACLFlowEx NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.5.2.1.3.6 |
sleV2Security4ACLFlowClass OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5.2.2 |
sleV2Security4ACLFlowClassTableACL flow class table. SEQUENCE OF SleV2Security4ACLFlowClassEntry .1.3.6.1.4.1.6296.102.7.2.5.2.2.1 |
sleV2Security4ACLFlowClassEntrykey: sleV2Security4ACLFlowIndex, sleV2Security4ACLFlowClassIndex SleV2Security4ACLFlowClassEntry .1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1 |
sleV2Security4ACLFlowClassIndexThe index of the class for the flowro IntClassIndex .1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1.1 |
sleV2Security4ACLFlowClassIDThe identifier of the classro IntClassIndex .1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1.2 |
sleV2Security4ACLFlowClassNameThe name of the classro OctetName .1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1.3 |
sleV2Security4ACLFlowPolicy OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5.2.3 |
sleV2QoS4ACLFlowPolicyTableACL flow policy table. SEQUENCE OF SleV2QoS4ACLFlowPolicyEntry .1.3.6.1.4.1.6296.102.7.2.5.2.3.1 |
sleV2QoS4ACLFlowPolicyEntrykey: sleV2Security4ACLFlowIndex, sleV2Security4ACLFlowPolicyIndex SleV2QoS4ACLFlowPolicyEntry .1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1 |
sleV2Security4ACLFlowPolicyIndexThe index of the policy for the flowro IntPolicyIndex .1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1.1 |
sleV2Security4ACLFlowPolicyIDThe identifier of the policyro IntPolicyIndex .1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1.2 |
sleV2Security4ACLFlowPolicyNameThe name of the policyro OctetName .1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1.3 |
sleV2Security4ACLClass OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5.3 |
sleV2Security4ACLClassInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5.3.1 |
sleV2Security4ACLClassTableACL class table. SEQUENCE OF SleV2Security4ACLClassEntry .1.3.6.1.4.1.6296.102.7.2.5.3.1.1 |
sleV2Security4ACLClassEntrykey: sleV2Security4ACLClassIndex SleV2Security4ACLClassEntry .1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1 |
sleV2Security4ACLClassIndexThe index of classro IntClassIndex .1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1.1 |
sleV2Security4ACLClassNameThe name of classro OctetName .1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1.2 |
sleV2Security4ACLClassFlowCntThe counter of flow in classro Counter32 .1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1.3 |
sleV2Security4ACLClassControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5.3.1.2 |
sleV2Security4ACLClassControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.7.2.5.3.1.2.1 |
sleV2Security4ACLClassControlStatusThe status of user commandro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.7.2.5.3.1.2.2 |
sleV2Security4ACLClassControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.7.2.5.3.1.2.3 |
sleV2Security4ACLClassControlTimeStampThe time stamp of the last command(end of command)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.102.7.2.5.3.1.2.4 |
sleV2Security4ACLClassControlReqResultThe result of the last user commandro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.7.2.5.3.1.2.5 |
sleV2Security4ACLClassControlIndexThe index of classrw IntClassIndex .1.3.6.1.4.1.6296.102.7.2.5.3.1.2.6 |
sleV2Security4ACLClassControlNameThe name of classrw OctetName .1.3.6.1.4.1.6296.102.7.2.5.3.1.2.7 |
sleV2Security4ACLClassNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5.3.1.3 |
sleACLClassCreatedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.5.3.1.3.1 |
sleACLClassDestroyedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.5.3.1.3.2 |
sleACLClassAllDestroyedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.5.3.1.3.3 |
sleV2Security4ACLClassFlow OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5.3.2 |
sleV2Security4ACLClassFlowTableDescription. SEQUENCE OF SleV2Security4ACLClassFlowEntry .1.3.6.1.4.1.6296.102.7.2.5.3.2.1 |
sleV2Security4ACLClassFlowEntryDescription. SleV2Security4ACLClassFlowEntry .1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1 |
sleV2Security4ACLClassFlowIndexThe index of flow in classro IntFlowIndex .1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.1 |
sleV2Security4ACLClassFlowIDThe identifier of flowro IntFlowIndex .1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.2 |
sleV2Security4ACLClassFlowNameThe name of the flowro OctetName .1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.3 |
sleV2Security4ACLClassFlowClassNameThe class name of the Classflowro OctetName .1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.4 |
sleV2Security4ACLClassFlowControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5.3.2.2 |
sleV2Security4ACLClassFlowControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.7.2.5.3.2.2.1 |
sleV2Security4ACLClassFlowControlStatusThe status of user commandro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.7.2.5.3.2.2.2 |
sleV2Security4ACLClassFlowControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.7.2.5.3.2.2.3 |
sleV2Security4ACLClassFlowControlTimeStampThe time stamp of the last command(end of command)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.102.7.2.5.3.2.2.4 |
sleV2Security4ACLClassFlowControlReqResultThe result of the last user commandro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.7.2.5.3.2.2.5 |
sleV2Security4ACLClassFlowControlClassIndexThe index of classrw IntClassIndex .1.3.6.1.4.1.6296.102.7.2.5.3.2.2.6 |
sleV2Security4ACLClassFlowControlFlowIndexThe index of flow in this classrw IntFlowIndex .1.3.6.1.4.1.6296.102.7.2.5.3.2.2.7 |
sleV2Security4ACLClassFlowControlFlowIDThe index of flow Refer to sleV2QoS4FlowIndexrw IntFlowIndex .1.3.6.1.4.1.6296.102.7.2.5.3.2.2.8 |
sleV2Security4ACLClassFlowControlClassNameThe class name of classFlowrw OCTET STRING .1.3.6.1.4.1.6296.102.7.2.5.3.2.2.9 |
sleV2Security4ACLClassFlowNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5.3.2.3 |
sleACLClassFlowAddedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.5.3.2.3.1 |
sleACLClassFlowDeletedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.5.3.2.3.2 |
sleACLClassFlowAllDeletedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.5.3.2.3.3 |
sleV2Security4ACLClassPolicy OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5.3.3 |
sleV2Security4ACLClassPolicyTableDescription. SEQUENCE OF SleV2Security4ACLClassPolicyEntry .1.3.6.1.4.1.6296.102.7.2.5.3.3.1 |
sleV2Security4ACLClassPolicyEntryDescription. SleV2Security4ACLClassPolicyEntry .1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1 |
sleV2Security4ACLClassPolicyIndexThe index of the policy for the classro IntPolicyIndex .1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1.1 |
sleV2Security4ACLClassPolicyIDThe identifier of the policyro IntPolicyIndex .1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1.2 |
sleV2Security4ACLClassPolicyNameThe name of the policyro OctetName .1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1.3 |
sleV2Security4ACLPolicy OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5.4 |
sleV2Security4ACLPolicyInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5.4.1 |
sleV2Security4ACLPolicyTableACL policy table. SEQUENCE OF SleV2Security4ACLPolicyEntry .1.3.6.1.4.1.6296.102.7.2.5.4.1.1 |
sleV2Security4ACLPolicyEntrykey: sleV2Security4ACLPolicyIndex SleV2Security4ACLPolicyEntry .1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1 |
sleV2Security4ACLPolicyIndexThe index of policyro IntPolicyIndex .1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.1 |
sleV2Security4ACLPolicyNameThe name of policyro OctetName .1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.2 |
sleV2Security4ACLPolicyFlowCntThe counter of flow that was included to policyro Integer32 .1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.3 |
sleV2Security4ACLPolicyClassCntThe counter of class that was included to policyro Integer32 .1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.4 |
sleV2Security4ACLPolicyPriorityThe priority of the policy low : default valuero Enumeration .1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.5 |
sleV2Security4ACLPolicyMatchFlagThe action to be apply for matched packets. bit 0: deny the matched packets bit 1: mirror the matched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flowro IntPermit .1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.6 |
sleV2Security4ACLPolicyNomatchFlagThe action to be apply for matched packets. bit 0: deny the nomatched packets bit 1: mirror the nomatched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flowro IntPermit .1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.7 |
sleV2Security4ACLPolicyControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5.4.1.2 |
sleV2Security4ACLPolicyControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.7.2.5.4.1.2.1 |
sleV2Security4ACLPolicyControlStatusThe status of user commandro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.7.2.5.4.1.2.2 |
sleV2Security4ACLPolicyControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.7.2.5.4.1.2.3 |
sleV2Security4ACLPolicyControlTimeStampThe time stamp of the last command(end of command)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.102.7.2.5.4.1.2.4 |
sleV2Security4ACLPolicyControlReqResultThe result of the last user commandro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.7.2.5.4.1.2.5 |
sleV2Security4ACLPolicyControlIndexThe index of policyrw IntPolicyIndex .1.3.6.1.4.1.6296.102.7.2.5.4.1.2.6 |
sleV2Security4ACLPolicyControlNameThe name of policyrw OctetName .1.3.6.1.4.1.6296.102.7.2.5.4.1.2.7 |
sleV2Security4ACLPolicyControlPriorityThe priority of the policy low : defaultrw IntRulePriority .1.3.6.1.4.1.6296.102.7.2.5.4.1.2.8 |
sleV2Security4ACLPolicyControlMatchFlagThe action to be apply for matched packets. bit 0: deny the matched packets bit 1: mirror the matched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flowrw IntPermit .1.3.6.1.4.1.6296.102.7.2.5.4.1.2.9 |
sleV2Security4ACLPolicyControlNomatchFlagThe action to be apply for matched packets. bit 0: deny the nomatched packets bit 1: mirror the nomatched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flowrw IntPermit .1.3.6.1.4.1.6296.102.7.2.5.4.1.2.10 |
sleV2Security4ACLPolicyControlFlowIDThe index of flowrw Integer32 .1.3.6.1.4.1.6296.102.7.2.5.4.1.2.11 |
sleV2Security4ACLPolicyControlClassIDThe index of classrw Integer32 .1.3.6.1.4.1.6296.102.7.2.5.4.1.2.12 |
sleV2Security4ACLPolicyNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5.4.1.3 |
sleACLPolicyCreatedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.5.4.1.3.1 |
sleACLPolicyInfoChangedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.5.4.1.3.2 |
sleACLPolicyMatchActionChangedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.5.4.1.3.3 |
sleACLPolicyNomatchActionChangedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.5.4.1.3.4 |
sleACLPolicyDestroyedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.5.4.1.3.5 |
sleV2Security4ACLPolicyFlowClass OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5.4.2 |
sleV2Security4ACLPolicyFlowClassTableACL policy flow class table. SEQUENCE OF SleV2Security4ACLPolicyFlowClassEntry .1.3.6.1.4.1.6296.102.7.2.5.4.2.1 |
sleV2Security4ACLPolicyFlowClassEntrykey: sleV2Security4ACLPolicyIndex, sleV2Security4ACLPolicyFlowClassIndex SleV2Security4ACLPolicyFlowClassEntry .1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1 |
sleV2Security4ACLPolicyFlowClassIndexThe index of flow or class in policyro IntFlowIndex .1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.1 |
sleV2Security4ACLPolicyFlowClassTypeThe flag about flow or classro IntFlowOrClass .1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.2 |
sleV2Security4ACLPolicyFlowClassIDThe identifier of class or flowro IntFlowIndex .1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.3 |
sleV2Security4ACLPolicyFlowClassNameThe name of class or flowro OctetName .1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.4 |
sleV2Security4ACLPolicyFlowClassControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5.4.2.2 |
sleV2Security4ACLPolicyFlowClassControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.7.2.5.4.2.2.1 |
sleV2Security4ACLPolicyFlowClassControlStatusThe status of user commandrw SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.7.2.5.4.2.2.2 |
sleV2Security4ACLPolicyFlowClassControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.7.2.5.4.2.2.3 |
sleV2Security4ACLPolicyFlowClassControlTimeStampThe time stamp of the last command(end of command)rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.102.7.2.5.4.2.2.4 |
sleV2Security4ACLPolicyFlowClassControlReqResultThe result of the last user commandrw SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.7.2.5.4.2.2.5 |
sleV2Security4ACLPolicyFlowClassControlPolicyIndexThe index of Policyrw IntPolicyIndex .1.3.6.1.4.1.6296.102.7.2.5.4.2.2.6 |
sleV2Security4ACLPolicyFlowClassControlIndexThe index of flow or class in this policyrw IntFlowIndex .1.3.6.1.4.1.6296.102.7.2.5.4.2.2.7 |
sleV2Security4ACLPolicyFlowClassControlTypeThe type of flow or classrw IntFlowOrClass .1.3.6.1.4.1.6296.102.7.2.5.4.2.2.8 |
sleV2Security4ACLPolicyFlowClassControlFlowIDThe index of flow Available according to sleV2QoS4PolicyFlowClassControlType.rw IntFlowIndex .1.3.6.1.4.1.6296.102.7.2.5.4.2.2.9 |
sleV2Security4ACLPolicyFlowClassControlClassIDThe index of class Available according to sleV2QoS4PolicyFlowClassControlType.rw IntClassIndex .1.3.6.1.4.1.6296.102.7.2.5.4.2.2.10 |
sleV2Security4ACLPolicyFlowClassNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5.4.2.3 |
sleACLPolicyFlowAddedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.5.4.2.3.1 |
sleACLPolicyFlowDeletedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.5.4.2.3.2 |
sleACLPolicyAllFlowDeletedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.5.4.2.3.3 |
sleACLPolicyAllClassDeletedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.5.4.2.3.4 |
sleACLPolicyAllFlowClassDeletedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.5.4.2.3.5 |
sleV2Security4ACLGroup OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5.5 |
sleV2Security4ACLGroupIf OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5.5.1 |
sleV2Security4ACLGroupIfTableDescription. SEQUENCE OF SleV2Security4ACLGroupIfEntry .1.3.6.1.4.1.6296.102.7.2.5.5.1.1 |
sleV2Security4ACLGroupIfEntryDescription. SleV2Security4ACLGroupIfEntry .1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1 |
sleV2Security4ACLGroupIfindexinterface indexro Integer32 .1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.1 |
sleV2Security4ACLGroupIfTypeThe access-list typero Enumeration .1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.2 |
sleV2Security4ACLGroupIfNameThe access-list namero OCTET STRING .1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.3 |
sleV2Security4ACLGroupIfPriorityThe policy priorityro Enumeration .1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.4 |
sleV2Security4ACLGroupIfControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5.5.1.2 |
sleV2Security4ACLGroupIfControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.7.2.5.5.1.2.1 |
sleV2Security4ACLGroupIfControlStatusThe status of user commandrw SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.7.2.5.5.1.2.2 |
sleV2Security4ACLGroupIfControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.7.2.5.5.1.2.3 |
sleV2Security4ACLGroupIfControlReqResultThe time stamp of the last command(end of command)rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.102.7.2.5.5.1.2.4 |
sleV2Security4ACLGroupIfControlTimeStampThe result of the last user commandrw SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.7.2.5.5.1.2.5 |
sleV2Security4ACLGroupIfConrolIndexinterface indexrw Integer32 .1.3.6.1.4.1.6296.102.7.2.5.5.1.2.6 |
sleV2Security4ACLGroupIfControlTypeThe access-list typerw Enumeration .1.3.6.1.4.1.6296.102.7.2.5.5.1.2.7 |
sleV2Security4ACLGroupIfControlNameThe access-list namerw OCTET STRING .1.3.6.1.4.1.6296.102.7.2.5.5.1.2.8 |
sleV2Security4ACLGroupIfControlPriorityInteger 1: low(1) 2: medium(2) 3: high(3) 4: highest(4) The policy priorityrw Enumeration .1.3.6.1.4.1.6296.102.7.2.5.5.1.2.9 |
sleV2SecurityACLGroupIfNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.5.5.1.3 |
sleV2Security4ACLGroupIfProfileAddsetSecurityACLGroupIfProfile NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.5.5.1.3.1 |
sleV2Security4ACLGroupIfProfileDeletedelSecurityACLGroupIfProfile NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.5.5.1.3.2 |
sleV2SecuritySACL OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.6 |
sleV2SecuritySACLTableACL table. SEQUENCE OF SleV2SecuritySACLEntry .1.3.6.1.4.1.6296.102.7.2.6.1 |
sleV2SecuritySACLEntrykey: sleV2SecuritySACLName SleV2SecuritySACLEntry .1.3.6.1.4.1.6296.102.7.2.6.1.1 |
sleV2SecuritySACLNameName of this ACL rulero OctetName .1.3.6.1.4.1.6296.102.7.2.6.1.1.1 |
sleV2SecuritySACLSrcIpaddrThe IP address to match against the packet's source IP addressro IpAddress .1.3.6.1.4.1.6296.102.7.2.6.1.1.2 |
sleV2SecuritySACLSrcPrefixLengthSubnet mask.ro Integer32 .1.3.6.1.4.1.6296.102.7.2.6.1.1.3 |
sleV2SecuritySACLDstIpAddrThe IP address to match against the packet's destination IP addressro IpAddress .1.3.6.1.4.1.6296.102.7.2.6.1.1.4 |
sleV2SecuritySACLDstPrefixLengthSubnet mask.ro Integer32 .1.3.6.1.4.1.6296.102.7.2.6.1.1.5 |
sleV2SecuritySACLProtocolTypeThe type of IP protocol The flat internet protocol is from sleV2SecuritySACLTcpflag to sleV2SecuritySACLIcmpCode If the value is tcp(6) or udp(17), From sleV2SecuritySACLTcpflag to sleV2SecuritySACLDstL4Port value is available If the value is icmp(1), The value of sleV2SecuritySACLIcmpType and sleV2SecuritySACLIcmpCode is available The value of -1 means any(not set)ro IntProtocolType .1.3.6.1.4.1.6296.102.7.2.6.1.1.6 |
sleV2SecuritySACLTcpflagTCP flagro Bits .1.3.6.1.4.1.6296.102.7.2.6.1.1.7 |
sleV2SecuritySACLSrcL4PortThe source service port number (only valid for TCP or UDP packet)..ro IntL4Port .1.3.6.1.4.1.6296.102.7.2.6.1.1.8 |
sleV2SecuritySACLDstL4PortThe destination service port number (only valid for TCP or UDP packet).ro IntL4Port .1.3.6.1.4.1.6296.102.7.2.6.1.1.9 |
sleV2SecuritySACLIcmpTypeThe Type of ICMP message The value of -1 means any(not set)ro IntProtocolType .1.3.6.1.4.1.6296.102.7.2.6.1.1.10 |
sleV2SecuritySACLIcmpCodeThe code of ICMP message The value of -1 means any(not set)ro IntProtocolType .1.3.6.1.4.1.6296.102.7.2.6.1.1.11 |
sleV2SecuritySACLPriorityThe type of ICMP message The value of -1 means any(not set)ro Enumeration .1.3.6.1.4.1.6296.102.7.2.6.1.1.12 |
sleV2SecuritySACLMatchActionAction for packets that match against this ACL rule.ro Enumeration .1.3.6.1.4.1.6296.102.7.2.6.1.1.13 |
sleV2SecuritySACLNomatchActionAction for packets that don't match against this ACL rule.ro Enumeration .1.3.6.1.4.1.6296.102.7.2.6.1.1.14 |
sleV2SecuritySACLControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.6.2 |
sleV2SecuritySACLControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.7.2.6.2.1 |
sleV2SecuritySACLControlStatusThe status of user commandro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.7.2.6.2.2 |
sleV2SecuritySACLControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.7.2.6.2.3 |
sleV2SecuritySACLControlTimeStampThe time stamp of the last command(end of command)ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6296.102.7.2.6.2.4 |
sleV2SecuritySACLControlReqResultThe result of the last user commandro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.7.2.6.2.5 |
sleV2SecuritySACLControlNameName of this ACL rulerw OctetName .1.3.6.1.4.1.6296.102.7.2.6.2.6 |
sleV2SecuritySACLControlSrcIpaddrThe IP address to match against the packet's source IP addressrw IpAddress .1.3.6.1.4.1.6296.102.7.2.6.2.7 |
sleV2SecuritySACLControlSrcPrefixLengthSubnet mask.rw IntIpAddrMask .1.3.6.1.4.1.6296.102.7.2.6.2.8 |
sleV2SecuritySACLControlDstIpaddrThe IP address to match against the packet's destination IP addressrw IpAddress .1.3.6.1.4.1.6296.102.7.2.6.2.9 |
sleV2SecuritySACLControlDstPrefixLengthSubnet mask.rw IntIpAddrMask .1.3.6.1.4.1.6296.102.7.2.6.2.10 |
sleV2SecuritySACLControlProtocolTypeThe IP protocol type valuerw IntProtocolType .1.3.6.1.4.1.6296.102.7.2.6.2.11 |
sleV2SecuritySACLControlTcpflagTCP flagrw Bits .1.3.6.1.4.1.6296.102.7.2.6.2.12 |
sleV2SecuritySACLControlSrcL4PortThe source service port number (only valid for TCP or UDP packet)..rw IntL4Port .1.3.6.1.4.1.6296.102.7.2.6.2.13 |
sleV2SecuritySACLControlDstL4PortThe destination service port number (only valid for TCP or UDP packet).rw IntL4Port .1.3.6.1.4.1.6296.102.7.2.6.2.14 |
sleV2SecuritySACLControlIcmpTypeThe type of ICMP message The value of -1 means any(not set)rw IntProtocolType .1.3.6.1.4.1.6296.102.7.2.6.2.15 |
sleV2SecuritySACLControlIcmpCodeThe code of ICMP message The value of -1 means any(not set)rw IntProtocolType .1.3.6.1.4.1.6296.102.7.2.6.2.16 |
sleV2SecuritySACLControlPriorityThe Priority of this ACL rule)rw Enumeration .1.3.6.1.4.1.6296.102.7.2.6.2.17 |
sleV2SecuritySACLControlMatchActionAction for packets that match against this ACL rule.rw Enumeration .1.3.6.1.4.1.6296.102.7.2.6.2.18 |
sleV2SecuritySACLControlNomatchActionAction for packets that don't match against this ACL rule.rw Enumeration .1.3.6.1.4.1.6296.102.7.2.6.2.19 |
sleV2SecuritySACLNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.6.3 |
sleSACLCreatedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.6.3.1 |
sleSACLDestroyedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.6.3.2 |
sleSACLAllDestroyedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.6.3.3 |
sleV2SecurityACLStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.7 |
sleV2SecurityACLStatisticsBase OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.7.1 |
sleV2SecurityACLStatisticsBaseInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.7.1.1 |
sleV2SecurityACLStatisticsSyslogStatusACL statistics syslog statusro Enumeration .1.3.6.1.4.1.6296.102.7.2.7.1.1.1 |
sleV2SecurityACLStatisticsBaseControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.7.1.2 |
sleV2SecurityACLStatisticsBaseControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.7.2.7.1.2.1 |
sleV2SecurityACLStatisticsBaseControlStatusThe status of user commandro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.7.2.7.1.2.2 |
sleV2SecurityACLStatisticsBaseControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.7.2.7.1.2.3 |
sleV2SecurityACLStatisticsBaseControlTimeStampThe time stamp of the last command(end of command)ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6296.102.7.2.7.1.2.4 |
sleV2SecurityACLStatisticsBaseControlReqResultThe result of the last user commandro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.7.2.7.1.2.5 |
sleV2SecurityACLStatisticsBaseControlSyslogModeThe ACL statistics syslog moderw Enumeration .1.3.6.1.4.1.6296.102.7.2.7.1.2.6 |
sleV2SecurityACLStatisticsBaseNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.7.1.3 |
sleV2SecurityACLStatisticsSyslogModeChangedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.7.1.3.1 |
sleV2SecurityACLStatisticsPacketHistory OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.7.2 |
sleV2SecurityACLPacketCountTableACL packet count table. SEQUENCE OF SleV2SecurityACLPacketCountEntry .1.3.6.1.4.1.6296.102.7.2.7.2.1 |
sleV2SecurityACLPacketCountEntrykey: sleV2SecuritySACLName SleV2SecurityACLPacketCountEntry .1.3.6.1.4.1.6296.102.7.2.7.2.1.1 |
sleV2SecurityACLTotalPacketACL total packetro Counter64 .1.3.6.1.4.1.6296.102.7.2.7.2.1.1.1 |
sleV2SecurityACLSrcHistoryTableACL source history table. SEQUENCE OF SleV2SecurityACLSrcHistoryEntry .1.3.6.1.4.1.6296.102.7.2.7.2.2 |
sleV2SecurityACLSrcHistoryEntrykey: sleV2SecuritySACLName, sleV2SecurityACLSrcHistoryIndex SleV2SecurityACLSrcHistoryEntry .1.3.6.1.4.1.6296.102.7.2.7.2.2.1 |
sleV2SecurityACLSrcHistoryIndexThe ACL index.ro Integer32 .1.3.6.1.4.1.6296.102.7.2.7.2.2.1.1 |
sleV2SecurityACLSrcHistoryIpAddrThe ACl IP addressro IpAddress .1.3.6.1.4.1.6296.102.7.2.7.2.2.1.2 |
sleV2SecurityACLStatisticsControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.7.2.3 |
sleV2SecurityACLStatisticsControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.7.2.7.2.3.1 |
sleV2SecurityACLStatisticsControlStatusThe status of user commandro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.7.2.7.2.3.2 |
sleV2SecurityACLStatisticsControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.7.2.7.2.3.3 |
sleV2SecurityACLStatisticsControlTimeStampThe time stamp of the last command(end of command)ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6296.102.7.2.7.2.3.4 |
sleV2SecurityACLStatisticsControlReqResultThe result of the last user commandro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.7.2.7.2.3.5 |
sleV2SecurityACLStatisticsControlNameThe ACL statistics namerw OctetName .1.3.6.1.4.1.6296.102.7.2.7.2.3.6 |
sleV2SecurityACLStatisticsNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.7.2.4 |
sleV2SecurityACLStatisticsClearedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.7.2.4.1 |
sleV2CpuPacketFilter OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.8 |
sleV2CpuPacketFilterTablecpu packet filter table. SEQUENCE OF SleV2CpuPacketFilterEntry .1.3.6.1.4.1.6296.102.7.2.8.1 |
sleV2CpuPacketFilterEntrykey: sleV2CpuPacketFilterIndex SleV2CpuPacketFilterEntry .1.3.6.1.4.1.6296.102.7.2.8.1.1 |
sleV2CpuPacketFilterIndexThe index of cpu packet filterro Integer32 .1.3.6.1.4.1.6296.102.7.2.8.1.1.1 |
sleV2CpuPacketFilterNameThe name of cpu packet filterro OCTET STRING .1.3.6.1.4.1.6296.102.7.2.8.1.1.2 |
sleV2CpuPacketFilterCreationTimeThe creation time. (unit : sec)ro Counter32 .1.3.6.1.4.1.6296.102.7.2.8.1.1.3 |
sleV2CpuPacketFilterElapsedtimeAfterClearThe elapsed time after clear (unit : sec)ro Counter32 .1.3.6.1.4.1.6296.102.7.2.8.1.1.4 |
sleV2CpuPacketFilterStageThe stage of cpu packet filter.ro Enumeration .1.3.6.1.4.1.6296.102.7.2.8.1.1.5 |
sleV2CpuPacketFilterPriorityThe priority of cpu packet filter.ro Integer32 .1.3.6.1.4.1.6296.102.7.2.8.1.1.6 |
sleV2CpuPacketFilterActionThe action to matched packet. Dot1q -> replace dot1qAttach -> add dot1qDettach -> removero Enumeration .1.3.6.1.4.1.6296.102.7.2.8.1.1.7 |
sleV2CpuPacketFilterActionRateLimitThe allowed-packet count per second.ro Integer32 .1.3.6.1.4.1.6296.102.7.2.8.1.1.8 |
sleV2CpuPacketFilterActionBurstSizeThe burst-allowed-packet count.ro Integer32 .1.3.6.1.4.1.6296.102.7.2.8.1.1.9 |
sleV2CpuPacketFilterActionTpidThe Action TPID The value 65535(0xffff) means any.ro Integer32 .1.3.6.1.4.1.6296.102.7.2.8.1.1.10 |
sleV2CpuPacketFilterActionPcpThe Action PCP. The value 255(0xff) means any.ro Integer32 (0..7 | 255) .1.3.6.1.4.1.6296.102.7.2.8.1.1.11 |
sleV2CpuPacketFilterActionVidThe Action VID The value 65535(0xffff) means any.ro Integer32 (0 | 1..4094 | 65535) .1.3.6.1.4.1.6296.102.7.2.8.1.1.12 |
sleV2CpuPacketFilterActionTagPositionThe Action tag position. 1 s-vlan 2 c-vlanro Integer32 (0 | 1..8) .1.3.6.1.4.1.6296.102.7.2.8.1.1.13 |
sleV2CpuPacketFilterMatchTablecpu packet filter match table. SEQUENCE OF SleV2CpuPacketFilterMatchEntry .1.3.6.1.4.1.6296.102.7.2.8.2 |
sleV2CpuPacketFilterMatchEntrykey: sleV2CpuPacketFilterIndex, sleV2CpuPacketFilterMatchIndex SleV2CpuPacketFilterMatchEntry .1.3.6.1.4.1.6296.102.7.2.8.2.1 |
sleV2CpuPacketFilterMatchIndexThe match entry Indexro Integer32 .1.3.6.1.4.1.6296.102.7.2.8.2.1.1 |
sleV2CpuPacketFilterMatchTypeThe match classifiter type.ro Bits .1.3.6.1.4.1.6296.102.7.2.8.2.1.2 |
sleV2CpuPacketFilterMatchCosThe matched CoS Queue.ro OCTET STRING .1.3.6.1.4.1.6296.102.7.2.8.2.1.3 |
sleV2CpuPacketFilterMatchPortThe matched port index.ro OCTET STRING .1.3.6.1.4.1.6296.102.7.2.8.2.1.4 |
sleV2CpuPacketFilterMatchVidmapThe matched VID.ro OCTET STRING .1.3.6.1.4.1.6296.102.7.2.8.2.1.5 |
sleV2CpuPacketFilterMatchTagPositionThe matched tag position.ro Integer32 (0 | 1..8) .1.3.6.1.4.1.6296.102.7.2.8.2.1.6 |
sleV2CpuPacketFilterMatchTpidThe matched TPID.ro Integer32 .1.3.6.1.4.1.6296.102.7.2.8.2.1.7 |
sleV2CpuPacketFilterMatchPcpThe matched PCPro Integer32 (0..7 | 255) .1.3.6.1.4.1.6296.102.7.2.8.2.1.8 |
sleV2CpuPacketFilterMatchVidThe matched VIDro Integer32 (0 | 1..4094 | 65535) .1.3.6.1.4.1.6296.102.7.2.8.2.1.9 |
sleV2CpuPacketFilterMatchOffsetThe matched offsetro Integer32 .1.3.6.1.4.1.6296.102.7.2.8.2.1.10 |
sleV2CpuPacketFilterMatchLengthThe matched Lengthro Integer32 .1.3.6.1.4.1.6296.102.7.2.8.2.1.11 |
sleV2CpuPacketFilterMatchDataThe matched data. (HEX string)ro OCTET STRING .1.3.6.1.4.1.6296.102.7.2.8.2.1.12 |
sleV2CpuPacketFilterMatchMaskThe matched mask. (HEX string)ro OCTET STRING .1.3.6.1.4.1.6296.102.7.2.8.2.1.13 |
sleV2CpuPacketFilterMatchDescThe matched Descriptionro OCTET STRING .1.3.6.1.4.1.6296.102.7.2.8.2.1.14 |
sleV2CpuPacketFilterControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.8.3 |
sleV2CpuPacketFilterControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.7.2.8.3.1 |
sleV2CpuPacketFilterControlStatusThe status of user commandro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.7.2.8.3.2 |
sleV2CpuPacketFilterControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.7.2.8.3.3 |
sleV2CpuPacketFilterControlTimeStampThe time stamp of the last command(end of command)ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6296.102.7.2.8.3.4 |
sleV2CpuPacketFilterControlReqResultThe result of the last user commandro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.7.2.8.3.5 |
sleV2CpuPacketFilterControlIndexThe match entry Indexrw Integer32 .1.3.6.1.4.1.6296.102.7.2.8.3.6 |
sleV2CpuPacketFilterControlNameCpu packet filter name.rw OCTET STRING .1.3.6.1.4.1.6296.102.7.2.8.3.7 |
sleV2CpuPacketFilterControlStageThe stage of cpu packet filter.rw Enumeration .1.3.6.1.4.1.6296.102.7.2.8.3.8 |
sleV2CpuPacketFilterControlPriorityThe priority of cpu packet filter.rw Integer32 .1.3.6.1.4.1.6296.102.7.2.8.3.9 |
sleV2CpuPacketFilterControlActionThe action to matched packet. Dot1q -> replace dot1qAttach -> add dot1qDettach -> removerw Enumeration .1.3.6.1.4.1.6296.102.7.2.8.3.10 |
sleV2CpuPacketFilterControlActionRateLimitThe allowed-packet count per second.rw Integer32 .1.3.6.1.4.1.6296.102.7.2.8.3.11 |
sleV2CpuPacketFilterControlActionBurstSizeThe burst-allowed-packet count.rw Integer32 .1.3.6.1.4.1.6296.102.7.2.8.3.12 |
sleV2CpuPacketFilterControlActionTpidThe Action TPID The value 65535(0xffff) means any.rw Integer32 .1.3.6.1.4.1.6296.102.7.2.8.3.13 |
sleV2CpuPacketFilterControlActionPcpThe Action PCP. The value 255(0xff) means any.rw Integer32 (0..7 | 255) .1.3.6.1.4.1.6296.102.7.2.8.3.14 |
sleV2CpuPacketFilterControlActionVidThe Action VID The value 65535(0xffff) means any.rw Integer32 (0 | 1..4094 | 65535) .1.3.6.1.4.1.6296.102.7.2.8.3.15 |
sleV2CpuPacketFilterControlActionTagPositionThe Action tag position. 1: S-vlan 2: C-vlan M2200 uses only 1 and 2.rw Integer32 (0 | 1..8) .1.3.6.1.4.1.6296.102.7.2.8.3.16 |
sleV2CpuPacketFilterControlMatchTypeThe match classifiter type.rw Bits .1.3.6.1.4.1.6296.102.7.2.8.3.17 |
sleV2CpuPacketFilterControlMatchCosThe matched CoS Queue. M2200 doesn't userw OCTET STRING .1.3.6.1.4.1.6296.102.7.2.8.3.18 |
sleV2CpuPacketFilterControlMatchPortThe matched port index.rw OCTET STRING .1.3.6.1.4.1.6296.102.7.2.8.3.19 |
sleV2CpuPacketFilterControlMatchVidmapThe matched VID M2200 doesn't userw OCTET STRING .1.3.6.1.4.1.6296.102.7.2.8.3.20 |
sleV2CpuPacketFilterControlMatchTagPositionThe matched tag position M2200 doesn't userw Integer32 (0 | 1..8) .1.3.6.1.4.1.6296.102.7.2.8.3.21 |
sleV2CpuPacketFilterControlMatchTpidThe matched TPID.rw Integer32 .1.3.6.1.4.1.6296.102.7.2.8.3.22 |
sleV2CpuPacketFilterControlMatchPcpThe matched PCPrw Integer32 (0..7 | 255) .1.3.6.1.4.1.6296.102.7.2.8.3.23 |
sleV2CpuPacketFilterControlMatchVidThe matched VIDrw Integer32 (0 | 1..4094 | 65535) .1.3.6.1.4.1.6296.102.7.2.8.3.24 |
sleV2CpuPacketFilterControlMatchOffsetThe matched offsetrw Integer32 .1.3.6.1.4.1.6296.102.7.2.8.3.25 |
sleV2CpuPacketFilterControlMatchLengthThe matched Lengthrw Integer32 .1.3.6.1.4.1.6296.102.7.2.8.3.26 |
sleV2CpuPacketFilterControlMatchDatahe matched data. (HEX string)rw OCTET STRING .1.3.6.1.4.1.6296.102.7.2.8.3.27 |
sleV2CpuPacketFilterControlMatchMaskThe matched mask. (HEX string)rw OCTET STRING .1.3.6.1.4.1.6296.102.7.2.8.3.28 |
sleV2CpuPacketFilterControlMatchDescThe matched Descriptionrw OCTET STRING .1.3.6.1.4.1.6296.102.7.2.8.3.29 |
sleV2CpuPacketFilterNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.8.4 |
sleV2CpuPacketFilterAddedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.8.4.1 |
sleV2CpuPacketFilterDeletedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.8.4.2 |
sleV2CpuPacketFilterActionChangedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.8.4.3 |
sleV2CpuPacketFilterMatchChangedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.8.4.4 |
sleV2VlanOperation OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.9 |
sleV2VlanOperationTableDescription. SEQUENCE OF SleV2VlanOperationEntry .1.3.6.1.4.1.6296.102.7.2.9.1 |
sleV2VlanOperationEntryDescription. SleV2VlanOperationEntry .1.3.6.1.4.1.6296.102.7.2.9.1.1 |
sleV2VlanOperationIndexThe vlan operation index.ro Integer32 .1.3.6.1.4.1.6296.102.7.2.9.1.1.1 |
sleV2VlanOperationNameThe vlan operation namero OCTET STRING .1.3.6.1.4.1.6296.102.7.2.9.1.1.2 |
sleV2VlanOperationStageThe vlan operation stage.ro Enumeration .1.3.6.1.4.1.6296.102.7.2.9.1.1.3 |
sleV2VlanOperationProirotyThe vlan operation priority.ro Integer32 .1.3.6.1.4.1.6296.102.7.2.9.1.1.4 |
sleV2VlanOperationPortThe vlan operation portsro OCTET STRING .1.3.6.1.4.1.6296.102.7.2.9.1.1.5 |
sleV2VlanOperationOuterVlanThe Outer vlan.ro OCTET STRING .1.3.6.1.4.1.6296.102.7.2.9.1.1.6 |
sleV2VlanOperationInnerVlanThe inner Vlan.ro OCTET STRING .1.3.6.1.4.1.6296.102.7.2.9.1.1.7 |
sleV2VlanOperationEtherTypeThe vlan operation ether-type.ro Integer32 .1.3.6.1.4.1.6296.102.7.2.9.1.1.8 |
sleV2VlanOperationIpProtocolThe vlan operation IP Protocolro Integer32 .1.3.6.1.4.1.6296.102.7.2.9.1.1.9 |
sleV2VlanOperationArpSipThe vlan operation source-IPaddress.ro OCTET STRING .1.3.6.1.4.1.6296.102.7.2.9.1.1.10 |
sleV2VlanOperationArpSipPfxLenThe vlan operation source-IPAddress prefix-length.ro Integer32 .1.3.6.1.4.1.6296.102.7.2.9.1.1.11 |
sleV2VlanOperationSipThe vlan operation Source-IPaddress.ro OCTET STRING .1.3.6.1.4.1.6296.102.7.2.9.1.1.12 |
sleV2VlanOperationSipPfxLenThe vlan operation Source-IPAddress prefix-length.ro Integer32 .1.3.6.1.4.1.6296.102.7.2.9.1.1.13 |
sleV2VlanOperationDipThe vlan operation Destination-IPaddress.ro OCTET STRING .1.3.6.1.4.1.6296.102.7.2.9.1.1.14 |
sleV2VlanOperationDipPfxLenThe vlan operation Destination-IPAddress prefix-length.ro Integer32 .1.3.6.1.4.1.6296.102.7.2.9.1.1.15 |
sleV2VlanOperationActionThe vlan-operation action types.ro Enumeration .1.3.6.1.4.1.6296.102.7.2.9.1.1.16 |
sleV2VlanOperationActionVidThe vlan operation action-vid.ro Integer32 .1.3.6.1.4.1.6296.102.7.2.9.1.1.17 |
sleV2VlanOperationControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.9.2 |
sleV2VlanOperationControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.7.2.9.2.1 |
sleV2VlanOperationControlStatusThe status of user commandro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.7.2.9.2.2 |
sleV2VlanOperationControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.7.2.9.2.3 |
sleV2VlanOperationControlTimeStampThe time stamp of the last command(end of command)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.102.7.2.9.2.4 |
sleV2VlanOperationControlReqResultThe result of the last user commandro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.7.2.9.2.5 |
sleV2VlanOperationControlIndexThe vlan operation index.rw Integer32 .1.3.6.1.4.1.6296.102.7.2.9.2.6 |
sleV2VlanOperationControlNameThe vlan operation namerw OCTET STRING .1.3.6.1.4.1.6296.102.7.2.9.2.7 |
sleV2VlanOperationControlStageThe vlan operation stage.rw Enumeration .1.3.6.1.4.1.6296.102.7.2.9.2.8 |
sleV2VlanOperationControlProirotyThe vlan operation priority.rw Integer32 .1.3.6.1.4.1.6296.102.7.2.9.2.9 |
sleV2VlanOperationControlPortThe vlan operation portsrw OCTET STRING .1.3.6.1.4.1.6296.102.7.2.9.2.10 |
sleV2VlanOperationControlOuterVlanThe Outer vlan.rw OCTET STRING .1.3.6.1.4.1.6296.102.7.2.9.2.11 |
sleV2VlanOperationControlInnerVlanThe Inner vlan.rw OCTET STRING .1.3.6.1.4.1.6296.102.7.2.9.2.12 |
sleV2VlanOperationControlEtherTypeThe vlan operation ether-type.rw Integer32 .1.3.6.1.4.1.6296.102.7.2.9.2.13 |
sleV2VlanOperationControlIpProtocolThe vlan operation IP Protocolrw Integer32 .1.3.6.1.4.1.6296.102.7.2.9.2.14 |
sleV2VlanOperationControlArpSipThe vlan operation source-IPaddress.rw OCTET STRING .1.3.6.1.4.1.6296.102.7.2.9.2.15 |
sleV2VlanOperationControlArpSipPfxLenThe vlan operation source-IPAddress prefix-length.rw Integer32 .1.3.6.1.4.1.6296.102.7.2.9.2.16 |
sleV2VlanOperationControlSipThe vlan operation Source-IPaddress.rw OCTET STRING .1.3.6.1.4.1.6296.102.7.2.9.2.17 |
sleV2VlanOperationControlSipPfxLenThe vlan operation Source-IPAddress prefix-length.rw Integer32 .1.3.6.1.4.1.6296.102.7.2.9.2.18 |
sleV2VlanOperationControlDipThe vlan operation Destination-IPaddress.rw OCTET STRING .1.3.6.1.4.1.6296.102.7.2.9.2.19 |
sleV2VlanOperationControlDipPfxLenThe vlan operation Destination-IPAddress prefix-length.rw Integer32 .1.3.6.1.4.1.6296.102.7.2.9.2.20 |
sleV2VlanOperationControlActionThe vlan-operation action types.rw Enumeration .1.3.6.1.4.1.6296.102.7.2.9.2.21 |
sleV2VlanOperationControlActionVidThe vlan operation action-vid.rw Integer32 .1.3.6.1.4.1.6296.102.7.2.9.2.22 |
sleV2VlanOperationNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.9.3 |
sleV2VlanOperationCreatedaddVlanOperation NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.9.3.1 |
sleV2VlanOperationDeleteddelVlanOperation NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.9.3.2 |
sleV2EthernetService OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.10 |
sleV2EthernetServiceBase OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.10.1 |
sleV2EthernetServiceEnableStatusThe ethernet service mode status.ro Enumeration .1.3.6.1.4.1.6296.102.7.2.10.1.1 |
sleV2EthernetServiceEnableManagementThe global management access status ( only in RT mode )ro Enumeration .1.3.6.1.4.1.6296.102.7.2.10.1.2 |
sleV2EthernetServiceHealthCheckPortThe health check port of uplink. ( only in COT mode )ro OCTET STRING .1.3.6.1.4.1.6296.102.7.2.10.1.3 |
sleV2EthernetServiceHealthCheckVidThe health check vid of uplink. ( only in COT mode )ro OCTET STRING .1.3.6.1.4.1.6296.102.7.2.10.1.4 |
sleV2EthernetServiceTableDescription. SEQUENCE OF SleV2EthernetServiceEntry .1.3.6.1.4.1.6296.102.7.2.10.2 |
sleV2EthernetServiceEntryDescription. SleV2EthernetServiceEntry .1.3.6.1.4.1.6296.102.7.2.10.2.1 |
sleV2EthernetServiceSidThe unique number is given by service identifier.ro INTEGER .1.3.6.1.4.1.6296.102.7.2.10.2.1.1 |
sleV2EthernetServiceTypeThe ethernet service type 1: unicast 2: multicastro Enumeration .1.3.6.1.4.1.6296.102.7.2.10.2.1.2 |
sleV2EthernetServiceRtCustomerPortThe Configuring service's customer port for RT mode.ro OCTET STRING .1.3.6.1.4.1.6296.102.7.2.10.2.1.3 |
sleV2EthernetServiceRtCustomerVidThe Configuring service's customer vid for RT mode.ro OCTET STRING .1.3.6.1.4.1.6296.102.7.2.10.2.1.4 |
sleV2EthernetServiceRtNetworkPortThe Configuring service's network port for RT mode.ro OCTET STRING .1.3.6.1.4.1.6296.102.7.2.10.2.1.5 |
sleV2EthernetServiceRtNetworkVidThe Configuring service's network vid for RT mode.ro OCTET STRING .1.3.6.1.4.1.6296.102.7.2.10.2.1.6 |
sleV2EthernetServiceRtEnableManagementDescription.ro Enumeration .1.3.6.1.4.1.6296.102.7.2.10.2.1.7 |
sleV2EthernetServiceCotExternalPortThe Configuring service's external port for COT mode.ro OCTET STRING .1.3.6.1.4.1.6296.102.7.2.10.2.1.8 |
sleV2EthernetServiceCotExternalVidThe Configuring service's external vid for COT mode.ro OCTET STRING .1.3.6.1.4.1.6296.102.7.2.10.2.1.9 |
sleV2EthernetServiceCotInternalPortThe Configuring service's internal port for COT mode.ro OCTET STRING .1.3.6.1.4.1.6296.102.7.2.10.2.1.10 |
sleV2EthernetServiceCotInternalVidThe Configuring service's internal vid for COT mode.ro OCTET STRING .1.3.6.1.4.1.6296.102.7.2.10.2.1.11 |
sleV2EthernetServiceControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.10.3 |
sleV2EthernetServiceControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.7.2.10.3.1 |
sleV2EthernetServiceControlStatusThe status of user commandro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.7.2.10.3.2 |
sleV2EthernetServiceControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.7.2.10.3.3 |
sleV2EthernetServiceControlTimeStampThe time stamp of the last command(end of command)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.102.7.2.10.3.4 |
sleV2EthernetServiceControlReqResultThe result of the last user commandro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.7.2.10.3.5 |
sleV2EthernetServiceControlEnableStatusThe ethernet service mode status.rw Enumeration .1.3.6.1.4.1.6296.102.7.2.10.3.6 |
sleV2EthernetServiceControlEnableManagementThe local management access status ( only in RT mode )rw Enumeration .1.3.6.1.4.1.6296.102.7.2.10.3.7 |
sleV2EthernetServiceControlHealthCheckPortThe health check port of uplink. ( only in COT mode )rw OCTET STRING .1.3.6.1.4.1.6296.102.7.2.10.3.8 |
sleV2EthernetServiceControlHealthCheckVidThe health check vid of uplink. ( only in COT mode )rw OCTET STRING .1.3.6.1.4.1.6296.102.7.2.10.3.9 |
sleV2EthernetServiceControlSidThe unique number is given by service identifier.rw INTEGER .1.3.6.1.4.1.6296.102.7.2.10.3.10 |
sleV2EthernetServiceControlTypeThe ethernet service type 1: unicast 2: multicastrw Enumeration .1.3.6.1.4.1.6296.102.7.2.10.3.11 |
sleV2EthernetServiceControlRtCustomerPortThe Configuring service's customer port for RT mode.rw OCTET STRING .1.3.6.1.4.1.6296.102.7.2.10.3.12 |
sleV2EthernetServiceControlRtCustomerVidThe Configuring service's customer vid for RT mode.rw OCTET STRING .1.3.6.1.4.1.6296.102.7.2.10.3.13 |
sleV2EthernetServiceControlRtNetworkPortThe Configuring service's network port for RT mode.rw OCTET STRING .1.3.6.1.4.1.6296.102.7.2.10.3.14 |
sleV2EthernetServiceControlRtNetworkVidThe Configuring service's network vid for RT mode.rw OCTET STRING .1.3.6.1.4.1.6296.102.7.2.10.3.15 |
sleV2EthernetServiceControlRtEnableManagementDescription.rw Enumeration .1.3.6.1.4.1.6296.102.7.2.10.3.16 |
sleV2EthernetServiceControlCotExternalPortThe Configuring service's external port for COT mode.rw OCTET STRING .1.3.6.1.4.1.6296.102.7.2.10.3.17 |
sleV2EthernetServiceControlCotExternalVidThe Configuring service's external vid for COT mode.rw OCTET STRING .1.3.6.1.4.1.6296.102.7.2.10.3.18 |
sleV2EthernetServiceControlCotInternalPortThe Configuring service's internal port for COT mode.rw OCTET STRING .1.3.6.1.4.1.6296.102.7.2.10.3.19 |
sleV2EthernetServiceControlCotInternalVidThe Configuring service's internal vid for COT mode.rw OCTET STRING .1.3.6.1.4.1.6296.102.7.2.10.3.20 |
sleV2EthernetServiceNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.2.10.4 |
sleV2EthernetServiceEnableStatusChangedsetEnableStatus NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.10.4.1 |
sleV2EthernetServiceEnableManagementChangedsetEnableManagement NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.10.4.2 |
sleV2EthernetServiceHealthCheckChangedsetHealthCheck NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.10.4.3 |
sleV2EthernetServiceHealthCheckDeleteddelHealthCheck NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.10.4.4 |
sleV2EthernetServiceSidForRtModeCreatedsetSidForRT NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.10.4.5 |
sleV2EthernetServiceSidForCotModeCreatedsetSidForCOT NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.10.4.6 |
sleV2EthernetServiceSidDeleteddelService NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.7.2.10.4.7 |
sleV2Security6 OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.7.3 |
sleV2SecurityGroupDescription. Unknown .1.3.6.1.4.1.6296.102.7.4 |
sleV2SecurityNotificationGroupDescription. Unknown .1.3.6.1.4.1.6296.102.7.5 |