SLEV2-QOS-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for SLEV2-QOS-MIB.
sleV2QoS
Main OID:
sleV2QoS.1.3.6.1.4.1.6296.102.10
644
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
644 total| Object Name |
|---|
sleV2QoSsleV2QoS MODULE-IDENTITY .1.3.6.1.4.1.6296.102.10 |
sleV2QoSBase OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.1 |
sleV2QoS4 OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2 |
sleV2QoS4Base OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.1 |
sleV2QoS4BaseInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.1.1 |
sleV2QoS4BaseFlowModeflow mode default : double mode, extension : triple modero Enumeration .1.3.6.1.4.1.6296.102.10.2.1.1.1 |
sleV2QoS4BaseControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.1.2 |
sleV2QoS4BaseControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.10.2.1.2.1 |
sleV2QoS4BaseControlStatusThe status of user commandro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.1.2.2 |
sleV2QoS4BaseControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.10.2.1.2.3 |
sleV2QoS4BaseControlTimeStampThe time stamp of the last command(end of command)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.102.10.2.1.2.4 |
sleV2QoS4BaseControlResultThe result of the last user commandro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.1.2.5 |
sleV2QoS4BaseControlFlowModeflow mode default : double mode, extension : triplerw Enumeration .1.3.6.1.4.1.6296.102.10.2.1.2.6 |
sleV2QoS4BaseNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.1.3 |
sleV2QoS4BaseFlowModeChangedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.1.3.1 |
sleV2QoS4Flow OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.2 |
sleV2QoS4FlowInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.2.1 |
sleV2QoS4FlowTableflow table. SEQUENCE OF SleV2QoS4FlowEntry .1.3.6.1.4.1.6296.102.10.2.2.1.1 |
sleV2QoS4FlowEntrykey: sleV2QoS4FlowIndex SleV2QoS4FlowEntry .1.3.6.1.4.1.6296.102.10.2.2.1.1.1 |
sleV2QoS4FlowIndexThe index of flowro INTEGER .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.1 |
sleV2QoS4FlowNameThe name of flowro OctetName .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.2 |
sleV2QoS4FlowEthernetTypeThe ethernet type value in incoming frames The value of -1 means any(not set).ro IntEthernetType .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.3 |
sleV2QoS4FlowSrcMacAddrThe source mac address The value of 00:00:00:00:00:00 is any(not set)ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.4 |
sleV2QoS4FlowSrcMacAddrMaskThe mask of the source mac address The value of 00:00:00:00:00:00 is any(not set)ro MacAddressMask .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.5 |
sleV2QoS4FlowDstMacAddrThe destination mac address The value of 00:00:00:00:00:00 is any(not set)ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.6 |
sleV2QoS4FlowDstMacAddrMaskThe mask of the destination mac address The value of 00:00:00:00:00:00 is any(not set)ro MacAddressMask .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.7 |
sleV2QoS4Flow8021pThe value of the IEEE802.1p priority in the packet The value of -1 means any(not set)ro Int8021p .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.8 |
sleV2QoS4FlowSrcIpAddrThe IP address to match against the packet's source IP address. The value of 0.0.0.0 means any(not set)ro IpAddress .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.9 |
sleV2QoS4FlowSrcIpAddrMaskThe mask of source IP address The value of -1 means any(not set)ro IntIpAddrMask .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.10 |
sleV2QoS4FlowDstIpAddrThe IP address to match against the packet's destination IP address. The value of 0.0.0.0 means any(not set)ro IpAddress .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.11 |
sleV2QoS4FlowDstIpAddrMaskThe mask of destination IP address The value of -1 means any(not set)ro IntIpAddrMask .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.12 |
sleV2QoS4FlowIpPktPriorityTypeThe Priority type of incoming IP packet (specify a type of sleUserFlowIpPktPriority)ro IntIpPktPriorityType .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.13 |
sleV2QoS4FlowIpPktPriorityThe Priority value of incoming IP packet If type is 1, this value's range is 0-7. If type is 2, this value's range is 0-63. If type is 3, this value's range is 0-255.ro Integer32 .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.14 |
sleV2QoS4FlowPktLenThe packet length of the incoming packet The value of -1 means any(not set)ro IntPktLen .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.15 |
sleV2QoS4FlowProtocolTypeThe type of IP protocol The flat internet protocol is from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode If the value is tcp(6), From sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowTcpFlag value is available If the value is udp(17), From sleV2QoS4FlowUdpSrcStartPort to sleV2QoS4FlowUdpDstEndPort value is available If the value is icmp(1), The value of sleV2QoS4FlowIcmpType and sleV2QoS4FlowIcmpCode is available The value of -1 means any(not set) Otherwise, from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode value is not available The value of -1 means any(not set)ro IntProtocolType .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.16 |
sleV2QoS4FlowTcpSrcStartPortThe start source port in range of source port in TCP packet The value of -1 means any(not set)ro IntL4Port .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.17 |
sleV2QoS4FlowTcpSrcEndPortThe end source port in range of source port in TCP packet The value of -1 means any(not set)ro IntL4Port .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.18 |
sleV2QoS4FlowTcpDstStartPortThe start destination port in range of source port in TCP packet. The value of -1 means any(not set)ro IntL4Port .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.19 |
sleV2QoS4FlowTcpDstEndPortThe end destination port in range of destination port in TCP packet. The value of -1 means any(not set)ro IntL4Port .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.20 |
sleV2QoS4FlowTcpFlagThe flag in TCP packetro Bits .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.21 |
sleV2QoS4FlowUdpSrcStartPortThe start source port in range of source port in UDP packet The value of -1 means any(not set)ro IntL4Port .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.22 |
sleV2QoS4FlowUdpSrcEndPortThe end source port in range of source port in UDP packet The value of -1 means any(not set)ro IntL4Port .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.23 |
sleV2QoS4FlowUdpDstStartPortThe start destination port in range of destination port in UDP packet. The value of -1 means any(not set)ro IntL4Port .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.24 |
sleV2QoS4FlowUdpDstEndPortThe end destination port in range of destination port in UDP packet. The value of -1 means any(not set)ro IntL4Port .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.25 |
sleV2QoS4FlowIcmpTypeThe type of ICMP message The value of -1 means any(not set)ro IntIcmpType .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.26 |
sleV2QoS4FlowIcmpCodeThe code of ICMP message The value of -1 means any(not set)ro IntIcmpCode .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.27 |
sleV2QoS4FlowHdrlenThe IP header length. The value of 0 means any(not set)ro INTEGER (0 | 1..15) .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.28 |
sleV2QoS4FlowHdrErrorThe IP header error checkro IntEnableFlag .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.29 |
sleV2QoS4FlowInnerVlanThe index of inner vlan. The value of -1 is nothing(not set)ro Integer32 .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.30 |
sleV2QoS4FlowInner8021pThe value of the Inner IEEE802.1p priority in the packet. The value of -1 means any(not set)ro Integer32 .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.31 |
sleV2QoS4FlowMacFlagThe any flag of mac addressro Enumeration .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.32 |
sleV2QoS4FlowIpFlagThe any flag of IP address.ro Enumeration .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.33 |
sleV2QoS4FlowMacDlfThe destination mac address is found or not.ro Enumeration .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.34 |
sleV2QoS4FlowTagTypeThe packet tag typero Enumeration .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.35 |
sleV2QoS4FlowInPktTagVidVID, 4095 : anyro Integer32 (1..4094 | 4095) .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.36 |
sleV2QoS4FlowInPktTagCfiCFI, 255:anyro Integer32 (0..1 | 255) .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.37 |
sleV2QoS4FlowInPktTagCoS802.1p, 255:anyro Integer32 (0..7 | 255) .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.38 |
sleV2QoS4FlowOutPktTagVidVID, 4095 : anyro Integer32 (1..4094 | 4095) .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.39 |
sleV2QoS4FlowOutPktTagCfiCFI, 255:anyro Integer32 (0..1 | 255) .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.40 |
sleV2QoS4FlowOutPktTagCoS802.1p, 255:anyro Integer32 (0..7 | 255) .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.41 |
sleV2QoS4FlowFlowAliasflow aliasro OCTET STRING .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.42 |
sleV2QoSFlowInetAddrTypeIP address typero InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.43 |
sleV2QoSFlowSrcInetAddrThe IP address to match against the packet's source IP address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.44 |
sleV2QoSFlowDstInetAddrThe IP address to match against the packet's destination IP address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.45 |
sleV2QoSFlowSrcInetAddrLenThe prefix length of source IP addressro InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.46 |
sleV2QoSFlowDstInetAddrLenThe prefix length of destination IP addressro InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.47 |
sleV2QoSFlowTrafficClassThe traffic class of IPv6 header The value of -1 means any(not set)ro INTEGER (-1 | 0..255) .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.48 |
sleV2QoSFlowFlowLabelThe flow label of IPv6 header The value of -1 means any(not set)ro INTEGER (-1 | 0..65535) .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.49 |
sleV2QoS4FlowOuterVlanThe index of outer vlan The value of -1 is nothing(not set)ro Integer32 (-1 | 0..4094) .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.50 |
sleV2QoS4FlowOuter8021pThe value of the outer IEEE802.1p priority in the packet The value of -1 means any(not set)ro Integer32 (-1 | 0..7) .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.51 |
sleV2QoS4FlowOnuCircuitIdThe value of the Onu Circuit-id The value of -1 means any(not set)ro Integer32 (-1 | 1..50000 | 50002 | 50003 | 50004 | 51002) .1.3.6.1.4.1.6296.102.10.2.2.1.1.1.52 |
sleV2QoS4FlowControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.2.1.2 |
sleV2QoS4FlowControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.10.2.2.1.2.1 |
sleV2QoS4FlowControlStatusThe status of user commandro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.2.1.2.2 |
sleV2QoS4FlowControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.10.2.2.1.2.3 |
sleV2QoS4FlowControlTimeStampThe time stamp of the last command(end of command)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.102.10.2.2.1.2.4 |
sleV2QoS4FlowControlReqResultThe result of the last user commandro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.2.1.2.5 |
sleV2QoS4FlowControlIndexThe index of flowrw IntFlowIndex .1.3.6.1.4.1.6296.102.10.2.2.1.2.6 |
sleV2QoS4FlowControlNameThe name of flowrw OctetName .1.3.6.1.4.1.6296.102.10.2.2.1.2.7 |
sleV2QoS4FlowControlEthernetTypeThe ethernet type value in incoming frames The value of -1 means any(not set).rw IntEthernetType .1.3.6.1.4.1.6296.102.10.2.2.1.2.8 |
sleV2QoS4FlowControlSrcMacAddrThe source mac address The value of 00:00:00:00:00:00 is any(not set)rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6296.102.10.2.2.1.2.9 |
sleV2QoS4FlowControlSrcMacAddrMaskThe mask of the source mac address The value of 00:00:00:00:00:00 is any(not set)rw MacAddressMask .1.3.6.1.4.1.6296.102.10.2.2.1.2.10 |
sleV2QoS4FlowControlDstMacAddrThe destination mac address The value of 00:00:00:00:00:00 is any(not set)rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6296.102.10.2.2.1.2.11 |
sleV2QoS4FlowControlDstMacAddrMaskThe mask of the destination mac address The value of 00:00:00:00:00:00 is any(not set)rw MacAddressMask .1.3.6.1.4.1.6296.102.10.2.2.1.2.12 |
sleV2QoS4FlowControl8021pThe value of the IEEE802.1p priority in the packet The value of -1 means any(not set)rw Int8021p .1.3.6.1.4.1.6296.102.10.2.2.1.2.13 |
sleV2QoS4FlowControlSrcIpAddrThe IP address to match against the packet's source IP address. The value of 0.0.0.0 means any(not set)rw IpAddress .1.3.6.1.4.1.6296.102.10.2.2.1.2.14 |
sleV2QoS4FlowControlSrcIpAddrMaskThe mask of source IP address The value of -1 means any(not set)rw IntIpAddrMask .1.3.6.1.4.1.6296.102.10.2.2.1.2.15 |
sleV2QoS4FlowControlDstIpAddrThe IP address to match against the packet's destination IP address. The value of 0.0.0.0 means any(not set)rw IpAddress .1.3.6.1.4.1.6296.102.10.2.2.1.2.16 |
sleV2QoS4FlowControlDstIpAddrMaskThe mask of destination IP address The value of -1 means any(not set)rw IntIpAddrMask .1.3.6.1.4.1.6296.102.10.2.2.1.2.17 |
sleV2QoS4FlowControlIpPktPriorityTypeThe Priority type of incoming IP packet (specify a type of sleUserFlowIpPktPriority) The value of -1 means any(not set)rw IntIpPktPriorityType .1.3.6.1.4.1.6296.102.10.2.2.1.2.18 |
sleV2QoS4FlowControlIpPktPriorityThe Priority value of incoming IP packet If type is 1, this value's range is 0-7. If type is 2, this value's range is 0-63. If type is 3, this value's range is 0-255. The value of -1 means any(not set)rw Integer32 .1.3.6.1.4.1.6296.102.10.2.2.1.2.19 |
sleV2QoS4FlowControlPktLenThe packet length of the incoming packet The value of -1 means any(not set)rw IntPktLen .1.3.6.1.4.1.6296.102.10.2.2.1.2.20 |
sleV2QoS4FlowControlProtocolTypeThe type of IP protocol The flat internet protocol is from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode If the value is tcp(6), From sleV2QoS4FlowControlTcpSrcStartPort to sleV2QoS4FlowControlTcpFlag value is available If the value is udp(17), From sleV2QoS4FlowControlUdpSrcStartPort to sleV2QoS4FlowControlUdpDstEndPort value is available If the value is icmp(1), The value of sleV2QoS4FlowControlIcmpType and sleV2QoS4FlowControlIcmpCode is available The value of -1 means any(not set) Otherwise, from sleV2QoS4FlowControlTcpSrcStartPort to sleV2QoS4FlowControlIcmpCode value is not available The value of -1 means any(not set)rw IntProtocolType .1.3.6.1.4.1.6296.102.10.2.2.1.2.21 |
sleV2QoS4FlowControlTcpSrcStartPortThe start source port in range of source port in TCP packet The value of -1 means any(not set)rw IntL4Port .1.3.6.1.4.1.6296.102.10.2.2.1.2.22 |
sleV2QoS4FlowControlTcpSrcEndPortThe end source port in range of source port in TCP packet The value of -1 means any(not set)rw IntL4Port .1.3.6.1.4.1.6296.102.10.2.2.1.2.23 |
sleV2QoS4FlowControlTcpDstStartPortThe start destination port in range of source port in TCP packet. The value of -1 means any(not set)rw IntL4Port .1.3.6.1.4.1.6296.102.10.2.2.1.2.24 |
sleV2QoS4FlowControlTcpDstEndPortThe end destination port in range of destination port in TCP packet. The value of -1 means any(not set)rw IntL4Port .1.3.6.1.4.1.6296.102.10.2.2.1.2.25 |
sleV2QoS4FlowControlTcpFlagThe flag in TCP packetrw Bits .1.3.6.1.4.1.6296.102.10.2.2.1.2.26 |
sleV2QoS4FlowControlUdpSrcStartPortThe start source port in range of source port in UDP packet The value of -1 means any(not set)rw IntL4Port .1.3.6.1.4.1.6296.102.10.2.2.1.2.27 |
sleV2QoS4FlowControlUdpSrcEndPortThe end source port in range of source port in UDP packet The value of -1 means any(not set)rw IntL4Port .1.3.6.1.4.1.6296.102.10.2.2.1.2.28 |
sleV2QoS4FlowControlUdpDstStartPortThe start destination port in range of destination port in UDP packet. The value of -1 means any(not set)rw IntL4Port .1.3.6.1.4.1.6296.102.10.2.2.1.2.29 |
sleV2QoS4FlowControlUdpDstEndPortThe end destination port in range of destination port in UDP packet. The value of -1 means any(not set)rw IntL4Port .1.3.6.1.4.1.6296.102.10.2.2.1.2.30 |
sleV2QoS4FlowControlIcmpTypeThe type of ICMP message The value of -1 means any(not set)rw IntIcmpType .1.3.6.1.4.1.6296.102.10.2.2.1.2.31 |
sleV2QoS4FlowControlIcmpCodeThe code of ICMP message The value of -1 means any(not set)rw IntIcmpCode .1.3.6.1.4.1.6296.102.10.2.2.1.2.32 |
sleV2QoS4FlowControlHdrlenThe IP header error checkrw INTEGER (0 | 1..15) .1.3.6.1.4.1.6296.102.10.2.2.1.2.33 |
sleV2QoS4FlowControlHdrErrorThe IP header error checkrw IntEnableFlag .1.3.6.1.4.1.6296.102.10.2.2.1.2.34 |
sleV2QoS4FlowControlInnerVlanThe index of inner vlan. The value of -1 is nothing(not set)rw Integer32 .1.3.6.1.4.1.6296.102.10.2.2.1.2.35 |
sleV2QoS4FlowControlInner8021pThe value of the Inner IEEE802.1p priority in the packet. The value of -1 means any(not set)rw Integer32 .1.3.6.1.4.1.6296.102.10.2.2.1.2.36 |
sleV2QoS4FlowControlMacFlagThe any flag of mac addressrw Enumeration .1.3.6.1.4.1.6296.102.10.2.2.1.2.37 |
sleV2QoS4FlowControlIpFlagThe any flag of IP address.rw Enumeration .1.3.6.1.4.1.6296.102.10.2.2.1.2.38 |
sleV2QoS4FlowControlMacDlfThe destination MAC address found or notrw Enumeration .1.3.6.1.4.1.6296.102.10.2.2.1.2.39 |
sleV2QoS4FlowControlTagTypeThe packet tag typerw Enumeration .1.3.6.1.4.1.6296.102.10.2.2.1.2.40 |
sleV2QoS4FlowControlPktTagVidVID, 4095 : any All VID, CFI, CoS are -1 : clear commandro Integer32 (-1 | 1..4094 | 4095) .1.3.6.1.4.1.6296.102.10.2.2.1.2.41 |
sleV2QoS4FlowControlPktTagCfiCFI, 255:any All VID, CFI, CoS are -1 : clear commandro Integer32 (-1 | 0..1 | 255) .1.3.6.1.4.1.6296.102.10.2.2.1.2.42 |
sleV2QoS4FlowControlPktTagCoS802.1p, 255:any All VID, CFI, CoS are -1 : clear commandro Integer32 (-1 | 0..7 | 255) .1.3.6.1.4.1.6296.102.10.2.2.1.2.43 |
sleV2QoS4FlowControlFlowAliasflow aliasro OCTET STRING .1.3.6.1.4.1.6296.102.10.2.2.1.2.44 |
sleV2QoSFlowControlInetAddrTypeIP address typero InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6296.102.10.2.2.1.2.45 |
sleV2QoSFlowControlSrcInetAddrThe IP address to match against the packet's source IP address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6296.102.10.2.2.1.2.46 |
sleV2QoSFlowControlDstInetAddrThe IP address to match against the packet's destination IP address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6296.102.10.2.2.1.2.47 |
sleV2QoSFlowControlSrcInetAddrLenThe prefix length of source IP addressro InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.6296.102.10.2.2.1.2.48 |
sleV2QoSFlowControlDstInetAddrLenThe prefix length of destination IP addressro InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.6296.102.10.2.2.1.2.49 |
sleV2QoSFlowControlTrafficClassThe traffic class of IPv6 header The value of -1 means any(not set)rw INTEGER (-1 | 0..255) .1.3.6.1.4.1.6296.102.10.2.2.1.2.50 |
sleV2QoSFlowControlFlowLabelThe flow label of IPv6 header The value of -1 means any(not set)rw INTEGER (-1 | 0..65535) .1.3.6.1.4.1.6296.102.10.2.2.1.2.51 |
sleV2QoS4FlowControlOuterVlanThe index of outer vlan The value of -1 is nothing(not set)rw Integer32 (-1 | 1..4094) .1.3.6.1.4.1.6296.102.10.2.2.1.2.52 |
sleV2QoS4FlowControlOuter8021pThe value of the outer IEEE802.1p priority in the packet The value of -1 means any(not set)rw Integer32 (-1 | 0..7) .1.3.6.1.4.1.6296.102.10.2.2.1.2.53 |
sleV2QoS4FlowControlOnuCircuitIdThe value of the Onu Circuit-id The value of -1 means any(not set)rw Integer32 (-1 | 1..5000 | 50002 | 50003 | 50004 | 51002) .1.3.6.1.4.1.6296.102.10.2.2.1.2.54 |
sleV2QoS4FlowNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.2.1.3 |
sleFlowCreatedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.2.1.3.1 |
sleFlowChangedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.2.1.3.2 |
sleFlowDestroyedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.2.1.3.3 |
sleFlowAllDestroyedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.2.1.3.4 |
sleFlowInPktTagChangedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.2.1.3.5 |
sleFlowOutPktTagChangedsetOutPktTag NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.2.1.3.6 |
sleFlowAliasChangedsetFlowAlias NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.2.1.3.7 |
sleFlowExCreatedcreateFlowEx NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.2.1.3.8 |
sleFlowExChangedsetFlowEx NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.2.1.3.9 |
sleV2QoS4FlowClass OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.2.2 |
sleV2QoS4FlowClassTableflow class table. SEQUENCE OF SleV2QoS4FlowClassEntry .1.3.6.1.4.1.6296.102.10.2.2.2.1 |
sleV2QoS4FlowClassEntrykey: sleV2QoS4FlowIndex, sleV2QoS4FlowClassIndex SleV2QoS4FlowClassEntry .1.3.6.1.4.1.6296.102.10.2.2.2.1.1 |
sleV2QoS4FlowClassIndexThe index of the class for the flowro IntClassIndex .1.3.6.1.4.1.6296.102.10.2.2.2.1.1.1 |
sleV2QoS4FlowClassIDThe identifier of the classro IntClassIndex .1.3.6.1.4.1.6296.102.10.2.2.2.1.1.2 |
sleV2QoS4FlowClassNameThe name of the classro OctetName .1.3.6.1.4.1.6296.102.10.2.2.2.1.1.3 |
sleV2QoS4FlowPolicy OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.2.3 |
sleV2QoS4FlowPolicyTableflow policy table. SEQUENCE OF SleV2QoS4FlowPolicyEntry .1.3.6.1.4.1.6296.102.10.2.2.3.1 |
sleV2QoS4FlowPolicyEntrykey: sleV2QoS4FlowIndex, sleV2QoS4FlowPolicyIndex SleV2QoS4FlowPolicyEntry .1.3.6.1.4.1.6296.102.10.2.2.3.1.1 |
sleV2QoS4FlowPolicyIndexThe index of the policy for the flowro IntPolicyIndex .1.3.6.1.4.1.6296.102.10.2.2.3.1.1.1 |
sleV2QoS4FlowPolicyIDThe identifier of the policyro IntPolicyIndex .1.3.6.1.4.1.6296.102.10.2.2.3.1.1.2 |
sleV2QoS4FlowPolicyNameThe name of the policyro OctetName .1.3.6.1.4.1.6296.102.10.2.2.3.1.1.3 |
sleV2QoS4Class OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.3 |
sleV2QoS4ClassInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.3.1 |
sleV2QoS4ClassTableclass table. SEQUENCE OF SleV2QoS4ClassEntry .1.3.6.1.4.1.6296.102.10.2.3.1.1 |
sleV2QoS4ClassEntrykey: sleV2QoS4ClassIndex SleV2QoS4ClassEntry .1.3.6.1.4.1.6296.102.10.2.3.1.1.1 |
sleV2QoS4ClassIndexThe index of classro IntClassIndex .1.3.6.1.4.1.6296.102.10.2.3.1.1.1.1 |
sleV2QoS4ClassNameThe name of classro OctetName .1.3.6.1.4.1.6296.102.10.2.3.1.1.1.2 |
sleV2QoS4ClassFlowCntThe counter of flow in classro Counter32 .1.3.6.1.4.1.6296.102.10.2.3.1.1.1.3 |
sleV2QoS4ClassControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.3.1.2 |
sleV2QoS4ClassControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.10.2.3.1.2.1 |
sleV2QoS4ClassControlStatusThe status of user commandro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.3.1.2.2 |
sleV2QoS4ClassControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.10.2.3.1.2.3 |
sleV2QoS4ClassControlTimeStampThe time stamp of the last command(end of command)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.102.10.2.3.1.2.4 |
sleV2QoS4ClassControlReqResultThe result of the last user commandro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.3.1.2.5 |
sleV2QoS4ClassControlIndexThe index of classrw IntClassIndex .1.3.6.1.4.1.6296.102.10.2.3.1.2.6 |
sleV2QoS4ClassControlNameThe name of classrw OctetName .1.3.6.1.4.1.6296.102.10.2.3.1.2.7 |
sleV2QoS4ClassNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.3.1.3 |
sleClassCreatedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.3.1.3.1 |
sleClassDestroyedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.3.1.3.2 |
sleClassAllDestroyedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.3.1.3.3 |
sleV2QoS4ClassFlow OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.3.2 |
sleV2QoS4ClassFlowTableclass flow table. SEQUENCE OF SleV2QoS4ClassFlowEntry .1.3.6.1.4.1.6296.102.10.2.3.2.1 |
sleV2QoS4ClassFlowEntrykey: sleV2QoS4ClassIndex, sleV2QoS4ClassFlowIndex SleV2QoS4ClassFlowEntry .1.3.6.1.4.1.6296.102.10.2.3.2.1.1 |
sleV2QoS4ClassFlowIndexThe index of flow in classro IntFlowIndex .1.3.6.1.4.1.6296.102.10.2.3.2.1.1.1 |
sleV2QoS4ClassFlowIDThe identifier of flowro IntFlowIndex .1.3.6.1.4.1.6296.102.10.2.3.2.1.1.2 |
sleV2QoS4ClassFlowNameThe name of the flowro OctetName .1.3.6.1.4.1.6296.102.10.2.3.2.1.1.3 |
sleV2QoS4ClassFlowClassNameThe class name of the flowro OctetName .1.3.6.1.4.1.6296.102.10.2.3.2.1.1.4 |
sleV2QoS4ClassFlowControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.3.2.2 |
sleV2QoS4ClassFlowControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.10.2.3.2.2.1 |
sleV2QoS4ClassFlowControlStatusThe status of user commandro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.3.2.2.2 |
sleV2QoS4ClassFlowControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.10.2.3.2.2.3 |
sleV2QoS4ClassFlowControlTimeStampThe time stamp of the last command(end of command)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.102.10.2.3.2.2.4 |
sleV2QoS4ClassFlowControlReqResultThe result of the last user commandro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.3.2.2.5 |
sleV2QoS4ClassFlowControlClassIndexThe index of classrw IntClassIndex .1.3.6.1.4.1.6296.102.10.2.3.2.2.6 |
sleV2QoS4ClassFlowControlFlowIndexThe index of flow in this classrw IntFlowIndex .1.3.6.1.4.1.6296.102.10.2.3.2.2.7 |
sleV2QoS4ClassFlowControlFlowIDThe index of flow Refer to sleV2QoS4FlowIndexrw IntFlowIndex .1.3.6.1.4.1.6296.102.10.2.3.2.2.8 |
sleV2QoS4ClassFlowControlClassNameThe class name of class-flowrw OctetName .1.3.6.1.4.1.6296.102.10.2.3.2.2.9 |
sleV2QoS4ClassFlowNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.3.2.3 |
sleClassFlowAddedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.3.2.3.1 |
sleClassFlowDeletedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.3.2.3.2 |
sleClassFlowAllDeletedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.3.2.3.3 |
sleV2QoS4ClassPolicy OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.3.3 |
sleV2QoS4ClassPolicyTableclass policy table. SEQUENCE OF SleV2QoS4ClassPolicyEntry .1.3.6.1.4.1.6296.102.10.2.3.3.1 |
sleV2QoS4ClassPolicyEntrykey: sleV2QoS4ClassIndex, sleV2QoS4ClassPolicyIndex SleV2QoS4ClassPolicyEntry .1.3.6.1.4.1.6296.102.10.2.3.3.1.1 |
sleV2QoS4ClassPolicyIndexThe index of the policy for the classro IntPolicyIndex .1.3.6.1.4.1.6296.102.10.2.3.3.1.1.1 |
sleV2QoS4ClassPolicyIDThe identifier of the policyro IntPolicyIndex .1.3.6.1.4.1.6296.102.10.2.3.3.1.1.2 |
sleV2QoS4ClassPolicyNameThe name of the policyro OctetName .1.3.6.1.4.1.6296.102.10.2.3.3.1.1.3 |
sleV2QoS4Policer OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.4 |
sleV2QoS4PolicerInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.4.1 |
sleV2QoS4PolicerTablepolicer table. SEQUENCE OF SleV2QoS4PolicerEntry .1.3.6.1.4.1.6296.102.10.2.4.1.1 |
sleV2QoS4PolicerEntrykey: sleV2QoS4PolicerIndex SleV2QoS4PolicerEntry .1.3.6.1.4.1.6296.102.10.2.4.1.1.1 |
sleV2QoS4PolicerIndexThe index of policerro IntPolicerIndex .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.1 |
sleV2QoS4PolicerNameThe name of policerro OctetName .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.2 |
sleV2QoS4PolicerMeterModeThe meter mode. *) According to this value, rate-limit, color-marking and min-max-bandwidth exclusively activated. The value of -1 means nothing(not set)ro IntMeterMode .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.3 |
sleV2QoS4PolicerRateLimitThe packet rate limit The value of -1 unlimit(not set)rw Integer32 .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.4 |
sleV2QoS4PolicerColorTypeColor marking type Available Value : srTCM or trTCM srTCM = Single Rate Three Color Marking trTCM = Two Rate Three Color Marking The value of -1 means nothing(not set)ro IntColorType .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.5 |
sleV2QoS4PolicerColorModeColor marking mode. The value of -1 means nothing(not set)ro IntColorMode .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.6 |
sleV2QoS4PolicerColorAwareModeColor marking aware mode *) Used only when sleV2QoS4PolicerColorMode is aware The value of -1 is nothing(not set)ro IntColorAwareMode .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.7 |
sleV2QoS4PolicerColorCIRCommitted Information Rate. The value is in unit for 64 kbps. The value of -1 is nothing(not set)ro IntColorCIR .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.8 |
sleV2QoS4PolicerColorCBSCommitted Burst Size. The value is in unit for square of 2 bits The value of -1 is nothing(not set)ro IntColorCBS .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.9 |
sleV2QoS4PolicerColorPIRPeak Information Rate. *) Used only when sleV2QoS4PolicerColorType is trTCM. The value is in unit for 64 kbps. The value of -1 is nothing(not set)ro IntColorPIR .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.10 |
sleV2QoS4PolicerColorPBSPeak Burst Size. *) Used only when sleV2QoS4PolicerColorType is trTCM. The value is in unit for square of 2 bits. The value of -1 is nothing(not set)ro IntColorPBS .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.11 |
sleV2QoS4PolicerColorEBSExcess Burst Size. *) Used only when sleV2QoS4PolicerColorType is srTCM. The value is in unit for square of 2 bits. The value of -1 is nothing(not set)ro IntColorEBS .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.12 |
sleV2QoS4PolicerColorRedActionThe action to be apply when incoming packet is colored in red. The value of -1 is nothing(not set)ro IntColorAction .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.13 |
sleV2QoS4PolicerColorYellowActionThe action to be apply when incoming packet is colored in yellow. The value of -1 is nothing(not set)ro IntColorAction .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.14 |
sleV2QoS4PolicerColorGreenActionThe action to be apply when incoming packet is colored in green. (not supported) The value of -1 is nothing(not set)ro IntColorAction .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.15 |
sleV2QoS4PolicerRemarkLayerModeThe remark mode 0 : Layer3 1 : Layer2ro Bits .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.16 |
sleV2QoS4PolicerRemarkModeThis value is available when sleV2QoS4PolicerRemarkLayerMode bit was checked(one or more) 0 : remark Queue 1 : remark External CoSro Bits .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.17 |
sleV2QoS4PolicerCounterModeThe counter mode The value of -1 is nothing(not set)ro IntCounterMode .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.18 |
sleV2QoS4PolicerAvrgCounterModeThe average counter mode The value of -1 is nothing(not set)ro IntAvrgCounterMode .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.19 |
sleV2QoS4PolicerMinBandwidthThe minium bandwidthro Integer32 .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.20 |
sleV2QoS4PolicerMaxBandwidthThe maximum bandwidthro Integer32 .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.21 |
sleV2QoS4PolicerColorRedDscpThe desc value to be apply when incoming packet is colored in red. Default : 30(0x1e)ro IntDscp .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.22 |
sleV2QoS4PolicerColorYellowDscpThe desc value to be apply when incoming packet is colored in yellow. Default : 28(0x1c)ro IntDscp .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.23 |
sleV2QoS4PolicerColorGreenDscpThe desc value to be apply when incoming packet is colored in green. Default : 30(0x1a)ro IntDscp .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.24 |
sleV2QoS4PolicerColorRedCosTypeThe CoS type colored in red.ro Enumeration .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.25 |
sleV2QoS4PolicerColorRedCosThe CoS colored in red.ro IntCoS .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.26 |
sleV2QoS4PolicerColorYellowCosTypeThe CoS type colored in yellowro Enumeration .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.27 |
sleV2QoS4PolicerColorYellowCosThe CoS colored in yellow.ro IntToS .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.28 |
sleV2QoS4PolicerColorGreenCosTypeThe CoS type colored in yellowro Enumeration .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.29 |
sleV2QoS4PolicerColorGreenCosThe CoS colored in green.ro IntToS .1.3.6.1.4.1.6296.102.10.2.4.1.1.1.30 |
sleV2QoS4PolicerControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.4.1.2 |
sleV2QoS4PolicerControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.10.2.4.1.2.1 |
sleV2QoS4PolicerControlStatusThe status of user commandro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.4.1.2.2 |
sleV2QoS4PolicerControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.10.2.4.1.2.3 |
sleV2QoS4PolicerControlTimeStampThe time stamp of the last command(end of command)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.102.10.2.4.1.2.4 |
sleV2QoS4PolicerControlReqResultThe result of the last user commandro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.4.1.2.5 |
sleV2QoS4PolicerControlIndexThe index of policerrw IntPolicerIndex .1.3.6.1.4.1.6296.102.10.2.4.1.2.6 |
sleV2QoS4PolicerControlNameThe name of policerrw OctetName .1.3.6.1.4.1.6296.102.10.2.4.1.2.7 |
sleV2QoS4PolicerControlMeterModeThe meter mode. *) According to this value, rate-limit and color-marking exclusively activated. The value of -1 means nothing(not set)rw IntMeterMode .1.3.6.1.4.1.6296.102.10.2.4.1.2.8 |
sleV2QoS4PolicerControlRateLimitThe packet rate limit The value of -1 unlimit(not set)rw Integer32 .1.3.6.1.4.1.6296.102.10.2.4.1.2.9 |
sleV2QoS4PolicerControlColorTypeColor marking type Available Value : srTCM or trTCM srTCM = Single Rate Three Color Marking trTCM = Two Rate Three Color Marking The value of -1 is nothing(not set)rw IntColorType .1.3.6.1.4.1.6296.102.10.2.4.1.2.10 |
sleV2QoS4PolicerControlColorModeColor marking mode. *) Used only when sleColorMarkingMode is aware The value of -1 means nothing(not set)rw IntColorMode .1.3.6.1.4.1.6296.102.10.2.4.1.2.11 |
sleV2QoS4PolicerControlColorAwareModeColor marking aware mode The value of -1 is nothing(not set)rw IntColorAwareMode .1.3.6.1.4.1.6296.102.10.2.4.1.2.12 |
sleV2QoS4PolicerControlColorCIRCommitted Information Rate. The value is in unit for 64 kbps. The value of -1 is nothing(not set)rw IntColorCIR .1.3.6.1.4.1.6296.102.10.2.4.1.2.13 |
sleV2QoS4PolicerControlColorCBSCommitted Burst Size. The value is in unit for square of 2 bits The value of -1 is nothing(not set)rw IntColorCBS .1.3.6.1.4.1.6296.102.10.2.4.1.2.14 |
sleV2QoS4PolicerControlColorPIRPeak Information Rate. *) Used only when sleV2QoS4PolicerColorMode is Aware. The value is in unit for 64 kbps. The value of -1 is nothing(not set)rw IntColorPIR .1.3.6.1.4.1.6296.102.10.2.4.1.2.15 |
sleV2QoS4PolicerControlColorPBSPeak Burst Size. *) Used only when sleV2QoS4PolicerColorMode is Aware. The value is in unit for square of 2 bits. The value of -1 is nothing(not set)rw IntColorPBS .1.3.6.1.4.1.6296.102.10.2.4.1.2.16 |
sleV2QoS4PolicerControlColorEBSExcess Burst Size. *) Used only when sleV2QoS4PolicerColorMode is Blind. The value is in unit for square of 2 bits. The value of -1 is nothing(not set)rw IntColorEBS .1.3.6.1.4.1.6296.102.10.2.4.1.2.17 |
sleV2QoS4PolicerControlColorRedActionThe action to be apply when incoming packet is colored in red. The value of -1 is nothing(not set)rw IntColorAction .1.3.6.1.4.1.6296.102.10.2.4.1.2.18 |
sleV2QoS4PolicerControlColorYellowActionThe action to be apply when incoming packet is colored in yellow. The value of -1 is nothing(not set)rw IntColorAction .1.3.6.1.4.1.6296.102.10.2.4.1.2.19 |
sleV2QoS4PolicerControlColorGreenActionThe action to be apply when incoming packet is colored in green. (not supported) The value of -1 is nothing(not set)rw IntColorAction .1.3.6.1.4.1.6296.102.10.2.4.1.2.20 |
sleV2QoS4PolicerControlRemarkLayerModeThe remark mode 0 : Layer3 1 : Layer2rw Bits .1.3.6.1.4.1.6296.102.10.2.4.1.2.21 |
sleV2QoS4PolicerControlRemarkModeThis value is available when sleV2QoS4PolicerControlRemarkLayerMode bit was checked(one or more) 0 : remark to Queue 1 : remark to External CoSro Bits .1.3.6.1.4.1.6296.102.10.2.4.1.2.22 |
sleV2QoS4PolicerControlCounterModeThe counter mode The value of -1 is nothing(not set)rw IntCounterMode .1.3.6.1.4.1.6296.102.10.2.4.1.2.23 |
sleV2QoS4PolicerControlAvrgCounterModeThe average counter mode The value of -1 is nothing(not set)rw IntAvrgCounterMode .1.3.6.1.4.1.6296.102.10.2.4.1.2.24 |
sleV2QoS4PolicerControlMinBandwidthThe minimum bandwidthrw Integer32 .1.3.6.1.4.1.6296.102.10.2.4.1.2.25 |
sleV2QoS4PolicerControlMaxBandwidthThe maximum bandwidthrw Integer32 .1.3.6.1.4.1.6296.102.10.2.4.1.2.26 |
sleV2QoS4PolicerControlColorRedDscpThe dscp value to be apply when incoming packet is colored in redrw IntDscp .1.3.6.1.4.1.6296.102.10.2.4.1.2.27 |
sleV2QoS4PolicerControlColorYellowDscpThe dscp value to be apply when incoming packet is colored in yellowrw IntDscp .1.3.6.1.4.1.6296.102.10.2.4.1.2.28 |
sleV2QoS4PolicerControlColorGreenDscpThe dscp value to be apply when incoming packet is colored in greenrw IntDscp .1.3.6.1.4.1.6296.102.10.2.4.1.2.29 |
sleV2QoS4PolicerControlColorRedCosTypeThe CoS type colored in red.rw Enumeration .1.3.6.1.4.1.6296.102.10.2.4.1.2.30 |
sleV2QoS4PolicerControlColorRedCosThe CoS colored in red.rw IntCoS .1.3.6.1.4.1.6296.102.10.2.4.1.2.31 |
sleV2QoS4PolicerControlColorYellowCosTypeThe CoS type colored in yellowrw Enumeration .1.3.6.1.4.1.6296.102.10.2.4.1.2.32 |
sleV2QoS4PolicerControlColorYellowCosThe CoS colored in yellow.rw IntToS .1.3.6.1.4.1.6296.102.10.2.4.1.2.33 |
sleV2QoS4PolicerControlColorGreenCosTypeThe CoS type colored in yellowrw Enumeration .1.3.6.1.4.1.6296.102.10.2.4.1.2.34 |
sleV2QoS4PolicerControlColorGreenCosThe CoS colored in green.rw IntToS .1.3.6.1.4.1.6296.102.10.2.4.1.2.35 |
sleV2QoS4PolicerNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.4.1.3 |
slePolicerCreatedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.4.1.3.1 |
slePolicerChangedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.4.1.3.2 |
slePolicerDestroyedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.4.1.3.3 |
sleV2QoS4PolicerMatchCounter OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.4.2 |
sleV2QoS4PolicerMatchCounterTablepolicer match counter table. SEQUENCE OF SleV2QoS4PolicerMatchCounterEntry .1.3.6.1.4.1.6296.102.10.2.4.2.1 |
sleV2QoS4PolicerMatchCounterEntrykey: sleV2QoS4PolicerMatchCounterName SleV2QoS4PolicerMatchCounterEntry .1.3.6.1.4.1.6296.102.10.2.4.2.1.1 |
sleV2QoS4PolicerMatchCounterNameThe rule-counter policer namero OCTET STRING .1.3.6.1.4.1.6296.102.10.2.4.2.1.1.1 |
sleV2QoS4PolicerMatchCounterDescThe rule-counter policer description.ro OCTET STRING .1.3.6.1.4.1.6296.102.10.2.4.2.1.1.2 |
sleV2QoS4PolicerMatchCounterValueThe counter-value of matched policer.ro Counter64 .1.3.6.1.4.1.6296.102.10.2.4.2.1.1.3 |
sleV2QoS4Policy OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.5 |
sleV2QoS4PolicyInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.5.1 |
sleV2QoS4PolicyTablepolicy table. SEQUENCE OF SleV2QoS4PolicyEntry .1.3.6.1.4.1.6296.102.10.2.5.1.1 |
sleV2QoS4PolicyEntrykey: sleV2QoS4PolicyIndex SleV2QoS4PolicyEntry .1.3.6.1.4.1.6296.102.10.2.5.1.1.1 |
sleV2QoS4PolicyIndexThe index of policyro IntPolicyIndex .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.1 |
sleV2QoS4PolicyNameThe name of policyro OctetName .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.2 |
sleV2QoS4PolicyFlowCntThe counter of flow that was included to policyro Integer32 .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.3 |
sleV2QoS4PolicyClassCntThe counter of class that was included to policyro Integer32 .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.4 |
sleV2QoS4PolicyPolicerIndexThe index of policer 0: no policerro INTEGER (0 | 1..1024) .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.5 |
sleV2QoS4PolicyPriorityThe priority of the policy low : default valuero IntRulePriority .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.6 |
sleV2QoS4PolicyIngressPortsThe ingress port mapro OCTET STRING .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.7 |
sleV2QoS4PolicyEgressPortsThe egress port mapro OCTET STRING .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.8 |
sleV2QoS4PolicyVlanThe index of vlan The value of -1 is nothing(not set)ro IntVlanID .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.9 |
sleV2QoS4PolicyMatchFlagThe action to be apply for matched packets. bit 0: deny the matched packets bit 1: mirror the matched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flow bit 7 : permit the matched packets bit 8 : set inner VLAN value bit 9 : set outer VLAN valuerw Bits .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.10 |
sleV2QoS4PolicyMatchVlanThe vlan id to be assigned for the matched packets The value of -1 is nothing(not set)ro IntVlanID .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.11 |
sleV2QoS4PolicyMatchRedirectVlanIf the value of sleV2QoS4PolicyMatchRedirectVlan is set the value of sleV2QoS4PolicyMatchRedirectPort must be set.ro IntVlanID .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.12 |
sleV2QoS4PolicyMatchRedirectPortIf the value of sleV2QoS4PolicyMatchRedirectPort is set the value of sleV2QoS4PolicyMatchRedirectVlan must be set.ro IntInterfaceIndex .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.13 |
sleV2QoS4PolicyMatchMarkModeThe match mark mode The value of -1 is nothing(not set)ro IntMarkMode .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.14 |
sleV2QoS4PolicyMatchQueueThe queue value to be apply for the matched packets The value of -1 is nothing(not set)ro IntQueue .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.15 |
sleV2QoS4PolicyMatchDpThe drop precedence The value of -1 is nothing(not set)ro IntDP .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.16 |
sleV2QoS4PolicyMatchCoSThe Class of Service The value of -1 is nothing(not set)ro IntCoS .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.17 |
sleV2QoS4PolicyMatchDscpThe DSCP The value of -1 is nothing(not set)ro IntDscp .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.18 |
sleV2QoS4PolicyMatchIpPrecedenceThe IP precedence The value of -1 is nothing(not set)ro IntIpPrecedence .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.19 |
sleV2QoS4PolicyMatchDstMacOrEgressPortsIf the value is nothing, sleV2QoS4PolicyMatchDstMac and sleV2QoS4PolicyMatchEgressPorts value is not available If the value is dstMac, the value of sleV2QoS4PolicyMatchDstMac is available If the value is egressPorts, the value of sleV2QoS4PolicyMatchEgressPorts is avaliblero IntDstMacOrEgressPorts .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.20 |
sleV2QoS4PolicyMatchDstMacDestination MAC Address of the matched packets The value of 00:00:00:00:00:00 is nothing(not set)ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.21 |
sleV2QoS4PolicyMatchEgressPortsThe egress port map of the matched packetsro OCTET STRING .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.22 |
sleV2QoS4PolicyNomatchFlagThe action to be apply for matched packets. bit 0: deny the nomatched packets bit 1: mirror the nomatched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flowro Bits .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.23 |
sleV2QoS4PolicyNomatchRedirectPortThe port to redirect to a nomatched packet. The value of -1 is nothing(not set)ro IntInterfaceIndex .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.24 |
sleV2QoS4PolicyNomatchCoSThe Class of Service The value of -1 is nothing(not set)ro IntCoS .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.25 |
sleV2QoS4PolicyNomatchDscpThe DSCP The value of -1 is nothing(not set)ro IntDscp .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.26 |
sleV2QoS4PolicyNomatchIpPrecedenceThe IP precedence The value of -1 is nothing(not set)rw IntIpPrecedence .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.27 |
sleV2QoS4PolicyCounterValueThe value of the counter Packet count or bytes according to policer's counter mode. The value of 0 is no matched count.ro Counter64 .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.28 |
sleV2QoS4PolicyCounterGreenBytesThe value of the octet counter for green-marked packets. Available only when sleV2QoS4PolicerMeterMode's value is color. The value of 0 is no matched count.ro Counter64 .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.29 |
sleV2QoS4PolicyCounterYellowBytesThe value of the octet counter for yellow-marked packets. Available only when sleV2QoS4PolicerMeterMode's value is color. The value of 0 is no matched count.ro Counter64 .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.30 |
sleV2QoS4PolicyCounterRedBytesThe value of the octet counter for red-marked packets. Available only when sleV2QoS4PolicerMeterMode's value is color. The value of 0 is no matched count.ro Counter64 .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.31 |
sleV2QoS4PolicyRedirBlackholeThe packet discardro IntEnableFlag .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.32 |
sleV2QoS4PolicyAvrg5SecCounterValueThe value of the average counter of 5 second. The bytes according to policer's average counter mode. The value of 0 is no matched count.ro Counter64 .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.33 |
sleV2QoS4PolicyAvrg1minCounterValueThe value of the average counter of 1 minute. The bytes according to policer's average counter mode. The value of 0 is no matched count.ro Counter64 .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.34 |
sleV2QoS4PolicyAvrg10minCounterValueThe value of the average counter of 10 minute. The bytes according to policer's average counter mode. The value of 0 is no matched count.ro Counter64 .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.35 |
sleV2QoS4PolicyIngressTunnelIfIndexIngress tunnel interface index.ro Integer32 .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.36 |
sleV2QoS4PolicyEgressTunnelIfIndexEgress tunnel interface index.ro Integer32 .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.37 |
sleV2QoS4PolicyCounterElapsedTimeAfterClearThe elapsed time after clearing counter.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.38 |
sleV2QoS4PolicyMatchPbrNextHopThe PBR(Policy-Based_routing) nexthop address.ro IpAddress .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.39 |
sleV2QoS4PolicyStageThe rule-policy-stage.ro Enumeration .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.40 |
sleV2QoS4PolicyIngressPortsFlagThe interface-binding ingress-port flag of policy.ro Enumeration .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.41 |
sleV2QoS4PolicyEgressPortsFlagThe interface-binding egress-port flag of policy.ro Enumeration .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.42 |
sleV2QoS4PolicyInnerVlanActionThe InnerVlan Action Mode The Value of -1 is nothing(not set)ro Enumeration .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.43 |
sleV2QoS4PolicyOuterVlanActionThe OuterVlan Action Mode The Value of -1 is nothing(not set)ro Enumeration .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.44 |
sleV2QoS4PolicyInnerVlanThe inner vlan id to be assigned for the matched packets The value of -1 is nothing(not set)ro INTEGER (-1 | 1..4094) .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.45 |
sleV2QoS4PolicyOuterVlanThe outer vlan id to be assigned for the matched packets The value of -1 is nothing(not set)ro INTEGER (-1 | 1..4094) .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.46 |
sleV2QoS4PolicyMatchPbrNextHopSecondaryThe PBR(Policy-Based_routing) nexthop secondary address.ro IpAddress .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.47 |
sleV2QoS4PolicyMatchPbrNextHopVerifyReachThe PBR(Policy-Based_routing) Verify-Reachability.ro Enumeration .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.48 |
sleV2QoS4PolicyMatchFlowAliasThe action match flowAliasro OCTET STRING .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.49 |
sleV2QoS4PolicyMatchInnerVlanCosReplaceThe inner vlan COS replace (-1: delete)ro Integer32 (-1 | 0..7) .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.50 |
sleV2QoS4PolicyMatchInnerVlanCfiReplaceThe inner vlan CFI replace (-1: delete)ro Integer32 (-1 | 0..1) .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.51 |
sleV2QoS4PolicyMatchOuterVlanCosReplaceThe outer vlan COS replace (-1: delete)ro Integer32 (-1 | 0..7) .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.52 |
sleV2QoS4PolicyMatchOuterVlanCfiReplaceThe outer vlan CFI replace (-1: delete)ro Integer32 (-1 | 0..1) .1.3.6.1.4.1.6296.102.10.2.5.1.1.1.53 |
sleV2QoS4PolicyControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.5.1.2 |
sleV2QoS4PolicyControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.10.2.5.1.2.1 |
sleV2QoS4PolicyControlStatusThe status of user commandro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.5.1.2.2 |
sleV2QoS4PolicyControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.10.2.5.1.2.3 |
sleV2QoS4PolicyControlTimeStampThe time stamp of the last command(end of command)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.102.10.2.5.1.2.4 |
sleV2QoS4PolicyControlReqResultThe result of the last user commandro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.5.1.2.5 |
sleV2QoS4PolicyControlIndexThe index of policyrw IntPolicyIndex .1.3.6.1.4.1.6296.102.10.2.5.1.2.6 |
sleV2QoS4PolicyControlNameThe name of policyrw OctetName .1.3.6.1.4.1.6296.102.10.2.5.1.2.7 |
sleV2QoS4PolicyControlPolicerIndexThe index of policer 0: no policerrw INTEGER (0 | 1..1024) .1.3.6.1.4.1.6296.102.10.2.5.1.2.8 |
sleV2QoS4PolicyControlPriorityThe priority of the policy low : defaultrw IntRulePriority .1.3.6.1.4.1.6296.102.10.2.5.1.2.9 |
sleV2QoS4PolicyControlIngressPortsThe ingress port maprw OCTET STRING .1.3.6.1.4.1.6296.102.10.2.5.1.2.10 |
sleV2QoS4PolicyControlEgressPortsThe egress port maprw OCTET STRING .1.3.6.1.4.1.6296.102.10.2.5.1.2.11 |
sleV2QoS4PolicyControlVlanThe index of vlan The value of -1 is nothing(not set)rw IntVlanID .1.3.6.1.4.1.6296.102.10.2.5.1.2.12 |
sleV2QoS4PolicyControlMatchFlagThe action to be apply for matched packets. bit 0: deny the matched packets bit 1: mirror the matched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flow bit 7 : permit the matched packets bit 8 : set inner VLAN value bit 9 : set outer VLAN valuerw Bits .1.3.6.1.4.1.6296.102.10.2.5.1.2.13 |
sleV2QoS4PolicyControlMatchVlanThe vlan id to be assigned for the matched packets The value of -1 is nothing(not set)rw IntVlanID .1.3.6.1.4.1.6296.102.10.2.5.1.2.14 |
sleV2QoS4PolicyControlMatchRedirectVlanThe valn id to redirect to a matched packet If the value of sleV2QoS4PolicyMatchRedirectVlan is set the value of sleV2QoS4PolicyMatchRedirectPort must be set. The value of -1 is nothing(not set)rw IntVlanID .1.3.6.1.4.1.6296.102.10.2.5.1.2.15 |
sleV2QoS4PolicyControlMatchRedirectPortThe port to redirect to a matched packet. If the value of sleV2QoS4PolicyMatchRedirectPort is set the value of sleV2QoS4PolicyMatchRedirectVlan must be set. The value of -1 is nothing(not set)rw IntInterfaceIndex .1.3.6.1.4.1.6296.102.10.2.5.1.2.16 |
sleV2QoS4PolicyControlMatchMarkModeThe match mark mode The value of -1 is nothing(not set)rw IntMarkMode .1.3.6.1.4.1.6296.102.10.2.5.1.2.17 |
sleV2QoS4PolicyControlMatchQueueThe queue value to be apply for the matched packets The value of -1 is nothing(not set)rw IntQueue .1.3.6.1.4.1.6296.102.10.2.5.1.2.18 |
sleV2QoS4PolicyControlMatchDpThe drop precedence The value of -1 is nothing(not set)rw IntDP .1.3.6.1.4.1.6296.102.10.2.5.1.2.19 |
sleV2QoS4PolicyControlMatchCoSThe Class of Service The value of -1 is nothing(not set)rw Integer32 .1.3.6.1.4.1.6296.102.10.2.5.1.2.20 |
sleV2QoS4PolicyControlMatchDscpThe DSCP The value of -1 is nothing(not set)rw IntDscp .1.3.6.1.4.1.6296.102.10.2.5.1.2.21 |
sleV2QoS4PolicyControlMatchIpPrecedenceThe IP precedence The value of -1 is nothing(not set)rw IntIpPrecedence .1.3.6.1.4.1.6296.102.10.2.5.1.2.22 |
sleV2QoS4PolicyControlMatchDstMacOrEgressPortsIf the value is nothing, sleV2QoS4PolicyControlMatchDstMac and sleV2QoS4PolicyControlMatchEgressPorts value is not available If the value is dstMac, the value of sleV2QoS4PolicyControlMatchDstMac is available If the value is egressPorts, the value of sleV2QoS4PolicyControlMatchEgressPorts is avaliblerw IntDstMacOrEgressPorts .1.3.6.1.4.1.6296.102.10.2.5.1.2.23 |
sleV2QoS4PolicyControlMatchDstMacDestination MAC Address of the matched packets The value of 00:00:00:00:00:00 is nothing(not set)rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6296.102.10.2.5.1.2.24 |
sleV2QoS4PolicyControlMatchEgressPortsThe egress port map of the matched packetsrw OCTET STRING .1.3.6.1.4.1.6296.102.10.2.5.1.2.25 |
sleV2QoS4PolicyControlNomatchFlagThe action to be apply for matched packets. bit 0: deny the nomatched packets bit 1: mirror the nomatched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flowrw Bits .1.3.6.1.4.1.6296.102.10.2.5.1.2.26 |
sleV2QoS4PolicyControlNomatchRedirectPortThe port to redirect to a nomatched packet. The value of -1 is nothing(not set)rw IntInterfaceIndex .1.3.6.1.4.1.6296.102.10.2.5.1.2.27 |
sleV2QoS4PolicyControlNomatchCoSThe Class of Service The value of -1 is nothing(not set)rw IntCoS .1.3.6.1.4.1.6296.102.10.2.5.1.2.28 |
sleV2QoS4PolicyControlNomatchDscpThe DSCP The value of -1 is nothing(not set)rw IntDscp .1.3.6.1.4.1.6296.102.10.2.5.1.2.29 |
sleV2QoS4PolicyControlNomatchIpPrecedenceThe IP precedence The value of -1 is nothing(not set)rw IntIpPrecedence .1.3.6.1.4.1.6296.102.10.2.5.1.2.30 |
sleV2QoS4PolicyControlMatchRedirBlackholeThe packet discardrw IntEnableFlag .1.3.6.1.4.1.6296.102.10.2.5.1.2.31 |
sleV2QoS4PolicyControlIngressTunnelIfIndexIngress tunnel interface index.rw Integer32 .1.3.6.1.4.1.6296.102.10.2.5.1.2.32 |
sleV2Qo4SPolicyControlEgressTunnelIfIndexEgress tunnel interface index.rw Integer32 .1.3.6.1.4.1.6296.102.10.2.5.1.2.33 |
sleV2QoS4PolicyControlMatchPbrNextHopThe PBR(Policy-Based_routing) nexthop address.rw IpAddress .1.3.6.1.4.1.6296.102.10.2.5.1.2.34 |
sleV2QoS4PolicyControlStageThe rule-policy-stage.rw Enumeration .1.3.6.1.4.1.6296.102.10.2.5.1.2.35 |
sleV2QoS4PolicyControlIngressPortsFlagThe interface-binding ingress-port flag of policy.rw Enumeration .1.3.6.1.4.1.6296.102.10.2.5.1.2.36 |
sleV2QoS4PolicyControlEgressPortsFlagThe interface-binding egress-port flag of policy.rw Enumeration .1.3.6.1.4.1.6296.102.10.2.5.1.2.37 |
sleV2QoS4PolicyControlInnerVlanActionThe InnerVlan Action Mode The Value of -1 is nothing(not set)rw Enumeration .1.3.6.1.4.1.6296.102.10.2.5.1.2.38 |
sleV2QoS4PolicyControlOuterVlanActionThe OuterVlan Action Mode The Value of -1 is nothing(not set)rw Enumeration .1.3.6.1.4.1.6296.102.10.2.5.1.2.39 |
sleV2QoS4PolicyControlInnerVlanThe inner vlan id to be assigned for the matched packets The value of -1 is nothing(not set)rw INTEGER (-1 | 1..4094) .1.3.6.1.4.1.6296.102.10.2.5.1.2.40 |
sleV2QoS4PolicyControlOuterVlanThe outer vlan id to be assigned for the matched packets The value of -1 is nothing(not set)rw INTEGER (-1 | 1..4094) .1.3.6.1.4.1.6296.102.10.2.5.1.2.41 |
sleV2QoS4PolicyControlMatchPbrNextHopSecondaryThe PBR(Policy-Based_routing) nexthop secondary address.rw IpAddress .1.3.6.1.4.1.6296.102.10.2.5.1.2.42 |
sleV2QoS4PolicyControlMatchPbrNextHopVerifyReachThe PBR(Policy-Based_routing) Verify-Reachability.rw Enumeration .1.3.6.1.4.1.6296.102.10.2.5.1.2.43 |
sleV2QoS4PolicyControlMatchFlowAliasThe action match flowAliasro OCTET STRING .1.3.6.1.4.1.6296.102.10.2.5.1.2.44 |
sleV2QoS4PolicyControlMatchInnerVlanCosReplaceThe inner vlan COS replace (-1: delete)rw Integer32 (-1 | 0..7) .1.3.6.1.4.1.6296.102.10.2.5.1.2.45 |
sleV2QoS4PolicyControlMatchInnerVlanCfiReplaceThe inner vlan CFI replace (-1: delete)rw Integer32 (-1 | 0..1) .1.3.6.1.4.1.6296.102.10.2.5.1.2.46 |
sleV2QoS4PolicyControlMatchOuterVlanCosReplaceThe outer vlan COS replace (-1: delete)rw Integer32 (-1 | 0..7) .1.3.6.1.4.1.6296.102.10.2.5.1.2.47 |
sleV2QoS4PolicyControlMatchOuterVlanCfiReplaceThe outer vlan CFI replace (-1: delete)rw Integer32 (-1 | 0..1) .1.3.6.1.4.1.6296.102.10.2.5.1.2.48 |
sleV2QoSPolicyNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.5.1.3 |
slePolicyCreatedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.5.1.3.1 |
slePolicyInfoChangedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.5.1.3.2 |
slePolicyMatchActionChangedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.5.1.3.3 |
slePolicyNomatchActionChangedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.5.1.3.4 |
slePolicyDestroyedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.5.1.3.5 |
slePolicyCounterClearedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.5.1.3.6 |
slePolicyEmptyCreatedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.5.1.3.7 |
slePolicyIngressTunnelSetDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.5.1.3.8 |
slePolicyIngressTunnelUnsetDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.5.1.3.9 |
slePolicyEgressTunnelSetDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.5.1.3.10 |
slePolicyEgressTunnelUnsetDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.5.1.3.11 |
slePolicyActionMatchFlowAliasChangedsetMatchActionFlowAlias NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.5.1.3.12 |
slePolicyMatchInnerVlanCosReplaceChangedsetMatchInnerVlanCosReplace NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.5.1.3.13 |
slePolicyMatchInnerVlanCfiReplaceChangedsetMatchInnerVlanCfiReplace NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.5.1.3.14 |
slePolicyMatchOuterVlanCosReplaceChangedsetMatchOuterVlanCosReplace NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.5.1.3.15 |
slePolicyMatchOuterVlanCfiReplaceChangedsetMatchOuterVlanCfiReplace NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.5.1.3.16 |
sleV2QoS4PolicyFlowClass OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.5.2 |
sleV2QoS4PolicyFlowClassTableflow class table. SEQUENCE OF SleV2QoS4PolicyFlowClassEntry .1.3.6.1.4.1.6296.102.10.2.5.2.1 |
sleV2QoS4PolicyFlowClassEntrykey: sleV2QoS4PolicyIndex, sleV2QoS4PolicyFlowClassIndex SleV2QoS4PolicyFlowClassEntry .1.3.6.1.4.1.6296.102.10.2.5.2.1.1 |
sleV2QoS4PolicyFlowClassIndexThe index of flow or class in policyro IntFlowIndex .1.3.6.1.4.1.6296.102.10.2.5.2.1.1.1 |
sleV2QoS4PolicyFlowClassTypeThe flag about flow or classro IntFlowOrClass .1.3.6.1.4.1.6296.102.10.2.5.2.1.1.2 |
sleV2QoS4PolicyFlowClassIDThe identifier of class or flowro IntFlowIndex .1.3.6.1.4.1.6296.102.10.2.5.2.1.1.3 |
sleV2QoS4PolicyFlowClassNameThe name of class or flowro OctetName .1.3.6.1.4.1.6296.102.10.2.5.2.1.1.4 |
sleV2QoS4PolicyFlowClassControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.5.2.2 |
sleV2QoS4PolicyFlowClassControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.10.2.5.2.2.1 |
sleV2QoS4PolicyFlowClassControlStatusThe status of user commandrw SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.5.2.2.2 |
sleV2QoS4PolicyFlowClassControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.10.2.5.2.2.3 |
sleV2QoS4PolicyFlowClassControlTimeStampThe time stamp of the last command(end of command)rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.102.10.2.5.2.2.4 |
sleV2QoS4PolicyFlowClassControlReqResultThe result of the last user commandrw SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.5.2.2.5 |
sleV2QoS4PolicyFlowClassControlPolicyIndexThe index of Policyrw IntPolicyIndex .1.3.6.1.4.1.6296.102.10.2.5.2.2.6 |
sleV2QoS4PolicyFlowClassControlIndexThe index of flow or class in this policyrw IntFlowIndex .1.3.6.1.4.1.6296.102.10.2.5.2.2.7 |
sleV2QoS4PolicyFlowClassControlTypeThe type of flow or classrw IntFlowOrClass .1.3.6.1.4.1.6296.102.10.2.5.2.2.8 |
sleV2QoS4PolicyFlowClassControlFlowIDThe index of flow Available according to sleV2QoS4PolicyFlowClassControlType.rw IntFlowIndex .1.3.6.1.4.1.6296.102.10.2.5.2.2.9 |
sleV2QoS4PolicyFlowClassControlClassIDThe index of class Available according to sleV2QoS4PolicyFlowClassControlType.rw IntClassIndex .1.3.6.1.4.1.6296.102.10.2.5.2.2.10 |
sleV2QoS4PolicyFlowClassNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.5.2.3 |
slePolicyFlowAddedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.5.2.3.1 |
slePolicyFlowDeletedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.5.2.3.2 |
slePolicyAllFlowDeletedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.5.2.3.3 |
slePolicyAllClassDeletedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.5.2.3.4 |
slePolicyAllFlowClassDeletedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.5.2.3.5 |
sleV2QoS4PolicyIF OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.5.3 |
sleV2QoS4PolicyIFTableDescription. SEQUENCE OF SleV2QoS4PolicyIFEntry .1.3.6.1.4.1.6296.102.10.2.5.3.1 |
sleV2QoS4PolicyIFEntryDescription. SleV2QoS4PolicyIFEntry .1.3.6.1.4.1.6296.102.10.2.5.3.1.1 |
sleV2QoS4PolicyIFDirectionPacket input/output directionro Enumeration .1.3.6.1.4.1.6296.102.10.2.5.3.1.1.1 |
sleV2QoS4PolicyIFControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.5.3.2 |
sleV2QoS4PolicyIFControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.10.2.5.3.2.1 |
sleV2QoS4PolicyIFControlStatusThe status of user commandro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.5.3.2.2 |
sleV2QoS4PolicyIFControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.10.2.5.3.2.3 |
sleV2QoS4PolicyIFControlTimeStampThe time stamp of the last command(end of command)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.102.10.2.5.3.2.4 |
sleV2QoS4PolicyIFControlReqResultThe result of the last user commandro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.5.3.2.5 |
sleV2QoS4PolicyIFControlIfindexThe interface index.rw Integer32 .1.3.6.1.4.1.6296.102.10.2.5.3.2.6 |
sleV2QoS4PolicyIFControlPolicyIndexThe Policy index.rw IntPolicerIndex .1.3.6.1.4.1.6296.102.10.2.5.3.2.7 |
sleV2QoS4PolicyIFControlDirectionPacket input/output directionrw Enumeration .1.3.6.1.4.1.6296.102.10.2.5.3.2.8 |
sleV2QoS4PolicyIFNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.5.3.3 |
sleV2QosPolicyIFServicePolicyChangedsetServicePolicy NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.5.3.3.1 |
sleV2QosPolicyIFServicePolicyClearedsetServicePolicy NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.5.3.3.2 |
sleV2QoS4Remark OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.6 |
sleV2QoS4RemarkBase OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.6.1 |
sleV2QoS4RemarkInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.6.1.1 |
sleV2QoS4RemarkLayer2ModeThe layer2 remark mode 1 : remark based on queue (default) 2 : remark based on 802.1p priorityro IntL2BaseRemarkMode .1.3.6.1.4.1.6296.102.10.2.6.1.1.1 |
sleV2QoS4RemarkModeThe remark mode 0 : enable 801.1p-remark for IP packets 1 : enable 801.1p-remark for Non-IP packetsro Bits .1.3.6.1.4.1.6296.102.10.2.6.1.1.2 |
sleV2QoS4RemarkControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.6.1.2 |
sleV2QoS4RemarkControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.10.2.6.1.2.1 |
sleV2QoS4RemarkControlStatusThe status of user commandrw SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.6.1.2.2 |
sleV2QoS4RemarkControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.10.2.6.1.2.3 |
sleV2QoS4RemarkControlTimStampThe time stamp of the last command(end of command)rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.102.10.2.6.1.2.4 |
sleV2QoS4RemarkControlReqResultThe result of the last user commandrw SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.6.1.2.5 |
sleV2QoS4RemarkControlLayer2ModeThe layer2 remark mode -1: default (remarkByQueue) 1 : remark by queue 2 : remark by priorityrw IntL2BaseRemarkMode .1.3.6.1.4.1.6296.102.10.2.6.1.2.6 |
sleV2QoS4RemarkControlModeThe remark mode 0 : enable 801.1p-remark for IP packets 1 : enable 801.1p-remark for Non-IP packetsrw Bits .1.3.6.1.4.1.6296.102.10.2.6.1.2.7 |
sleV2QoS4RemarkNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.6.1.3 |
sleRemarkChangedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.6.1.3.1 |
sleV2QoS4RemarkL3 OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.6.2 |
sleV2QoS4RemarkL3Tableremark L3 table. SEQUENCE OF SleV2QoS4RemarkL3Entry .1.3.6.1.4.1.6296.102.10.2.6.2.1 |
sleV2QoS4RemarkL3Entrykey: sleV2QoS4RemarkL3ColorIndex, sleV2QoS4RemarkL3DSCPIndex SleV2QoS4RemarkL3Entry .1.3.6.1.4.1.6296.102.10.2.6.2.1.1 |
sleV2QoS4RemarkL3ColorIndexThe index of colorro IntColorIndex .1.3.6.1.4.1.6296.102.10.2.6.2.1.1.1 |
sleV2QoS4RemarkL3DSCPIndexThe index of DSCP The index value of 1~ 64 mean 0 ~ 63 of the DSCPro IntDSCPIndex .1.3.6.1.4.1.6296.102.10.2.6.2.1.1.2 |
sleV2QoS4RemarkL3QueueThis is remarking to queue by Color and DSCP 0 : defaultro IntQueue .1.3.6.1.4.1.6296.102.10.2.6.2.1.1.3 |
sleV2QoS4RemarkL3DpThis is remarking to drop precednece by Color and DSCP 0 : defaultro IntDP .1.3.6.1.4.1.6296.102.10.2.6.2.1.1.4 |
sleV2QoS4RemarkL3CoSThis is remarking to CoS by Color and DSCP 0 : defaultro IntCoS .1.3.6.1.4.1.6296.102.10.2.6.2.1.1.5 |
sleV2QoS4RemarkL3DscpThis is remarking to DSCP by Color and DSCP 0 : defaultro IntDscp .1.3.6.1.4.1.6296.102.10.2.6.2.1.1.6 |
sleV2QoS4RemarkL3Control OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.6.2.2 |
sleV2QoS4RemarkL3ControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.10.2.6.2.2.1 |
sleV2QoS4RemarkL3ControlStatusThe status of user commandrw SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.6.2.2.2 |
sleV2QoS4RemarkL3ControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.10.2.6.2.2.3 |
sleV2QoS4RemarkL3ControlTimeStampThe time stamp of the last command(end of command)rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.102.10.2.6.2.2.4 |
sleV2QoS4RemarkL3ControlReqResultThe result of the last user commandrw SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.6.2.2.5 |
sleV2QoS4RemarkL3ControlColorIndexThe index of color markingrw IntColorIndex .1.3.6.1.4.1.6296.102.10.2.6.2.2.6 |
sleV2QoS4RemarkL3ControlDSCPIndexThe index of DSCP The index value of 1~ 64 mean 0 ~ 63 of the DSCPrw IntDSCPIndex .1.3.6.1.4.1.6296.102.10.2.6.2.2.7 |
sleV2QoS4RemarkL3ControlQueueThis is remarking to queue by Color and DSCP The value of -1 means nothing(not set)rw IntQueue .1.3.6.1.4.1.6296.102.10.2.6.2.2.8 |
sleV2QoS4RemarkL3ControlDpThis is remarking to drop precednece by Color and DSCP The value of -1 means nothing(not set)rw IntDP .1.3.6.1.4.1.6296.102.10.2.6.2.2.9 |
sleV2QoS4RemarkL3ControlCoSThis is remarking to CoS by Color and DSCP The value of -1 means nothing(not set)rw IntCoS .1.3.6.1.4.1.6296.102.10.2.6.2.2.10 |
sleV2QoS4RemarkL3ControlDscpThis is remarking to DSCP by Color and DSCP The value of -1 means nothing(not set)rw IntDscp .1.3.6.1.4.1.6296.102.10.2.6.2.2.11 |
sleV2QoS4RemarkL3Notification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.6.2.3 |
sleRemarkL3ChangedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.6.2.3.1 |
sleV2QoS4RemarkL2 OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.6.3 |
sleV2QoS4RemarkL2Tableremark L2 table. SEQUENCE OF SleV2QoS4RemarkL2Entry .1.3.6.1.4.1.6296.102.10.2.6.3.1 |
sleV2QoS4RemarkL2Entrykey: sleV2QoS4RemarkL2ColorIndex, sleV2QoS4RemarkL2QueueCoSIndex SleV2QoS4RemarkL2Entry .1.3.6.1.4.1.6296.102.10.2.6.3.1.1 |
sleV2QoS4RemarkL2ColorIndexThe index of color markingro IntColorIndex .1.3.6.1.4.1.6296.102.10.2.6.3.1.1.1 |
sleV2QoS4RemarkL2QueueCoSIndexThe index of queue or CoS The index value of 1~ 8 mean 0 ~ 7 of the queue and CoS Refer to sleV2QoS4RemarkLayer2Modero IntQueueCoSIndex .1.3.6.1.4.1.6296.102.10.2.6.3.1.1.2 |
sleV2QoS4RemarkL2QueueThis is remarking to queue by Color and L2(queue or CoS) 0 : defaultro IntQueue .1.3.6.1.4.1.6296.102.10.2.6.3.1.1.3 |
sleV2QoS4RemarkL2DpThis is remarking to drop precednece by L2(queue or CoS) 0 : defaultro IntDP .1.3.6.1.4.1.6296.102.10.2.6.3.1.1.4 |
sleV2QoS4RemarkL2CoSThis is remarking to CoS by Color and L2(queue or CoS) 0 : defaultro IntCoS .1.3.6.1.4.1.6296.102.10.2.6.3.1.1.5 |
sleV2QoS4RemarkL2DscpThis is remarking to DSCP by Color and L2(queue or CoS) 0 : defaultro IntDscp .1.3.6.1.4.1.6296.102.10.2.6.3.1.1.6 |
sleV2QoS4RemarkL2Control OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.6.3.2 |
sleV2QoS4RemarkL2ControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.10.2.6.3.2.1 |
sleV2QoS4RemarkL2ControlStatusThe status of user commandrw SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.6.3.2.2 |
sleV2QoS4RemarkL2ControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.10.2.6.3.2.3 |
sleV2QoS4RemarkL2ControlTimeStampThe time stamp of the last command(end of command)rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.102.10.2.6.3.2.4 |
sleV2QoS4RemarkL2ControlReqResultThe result of the last user commandrw SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.6.3.2.5 |
sleV2QoS4RemarkL2ControlColorIndexThe index of color markingrw IntColorIndex .1.3.6.1.4.1.6296.102.10.2.6.3.2.6 |
sleV2QoS4RemarkL2ControlQueueCoSIndexThe index of queue or CoS The index value of 1~ 8 mean 0 ~ 7 of the queue and CoS Refer to sleV2QoS4RemarkLayer2Modrw IntQueueCoSIndex .1.3.6.1.4.1.6296.102.10.2.6.3.2.7 |
sleV2QoS4RemarkL2ControlQueueThis is remarking to queue by Color and L2(queue or CoS) The value of -1 means nothing(not set)rw IntQueue .1.3.6.1.4.1.6296.102.10.2.6.3.2.8 |
sleV2QoS4RemarkL2ControlDpThis is remarking to drop precednece by L2(queue or CoS) The value of -1 means nothing(not set)rw IntDP .1.3.6.1.4.1.6296.102.10.2.6.3.2.9 |
sleV2QoS4RemarkL2ControlCoSThis is remarking to CoS by Color and L2(queue or CoS) The value of -1 means nothing(not set)rw IntCoS .1.3.6.1.4.1.6296.102.10.2.6.3.2.10 |
sleV2QoS4RemarkL2ControlDscpThis is remarking to DSCP by Color and L2(queue or CoS) The value of -1 means nothing(not set)rw IntDscp .1.3.6.1.4.1.6296.102.10.2.6.3.2.11 |
sleV2QoS4RemarkL2Notification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.6.3.3 |
sleRemarkL2ChangedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.6.3.3.1 |
sleV2QoS4RED OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.7 |
sleV2QoS4REDProfile OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.7.1 |
sleV2QoS4REDProfileTableredundancy profile table. SEQUENCE OF SleV2QoS4REDProfileEntry .1.3.6.1.4.1.6296.102.10.2.7.1.1 |
sleV2QoS4REDProfileEntrykey: sleV2QoS4REDProfileId, sleV2QoS4REDProfileQueueId SleV2QoS4REDProfileEntry .1.3.6.1.4.1.6296.102.10.2.7.1.1.1 |
sleV2QoS4REDProfileIdThe index of RED profile. Marvell : (1..4), BCM : number of ports.ro INTEGER .1.3.6.1.4.1.6296.102.10.2.7.1.1.1.1 |
sleV2QoS4REDProfileQueueIdThe index of queue.ro INTEGER .1.3.6.1.4.1.6296.102.10.2.7.1.1.1.2 |
sleV2QoS4REDProfileDp0MinThresDP0 min threshold. In case RED, used as RED min threshold. Marvell : (1..65535), BCM : (0..127)ro INTEGER (-1 | 0..65535) .1.3.6.1.4.1.6296.102.10.2.7.1.1.1.3 |
sleV2QoS4REDProfileDp0MaxThresDP0 max threshold. Used only in case WRED. Marvell : (1..65535), BCM : not supported.ro INTEGER (-1 | 0..65535) .1.3.6.1.4.1.6296.102.10.2.7.1.1.1.4 |
sleV2QoS4REDProfileDp0ProbDP0 drop probability. In case RED, used as RED probro INTEGER (-1 | 1..15) .1.3.6.1.4.1.6296.102.10.2.7.1.1.1.5 |
sleV2QoS4REDProfileDp1MinThresDP1 min threshold. Used only in case WRED Marvell : (1..65535), BCM : not supported.ro INTEGER (-1 | 0..65535) .1.3.6.1.4.1.6296.102.10.2.7.1.1.1.6 |
sleV2QoS4REDProfileDp1MaxThresDP1 max threshold. Used only in case WRED Marvell : (1..65535), BCM : not supported.ro INTEGER (-1 | 0..65535) .1.3.6.1.4.1.6296.102.10.2.7.1.1.1.7 |
sleV2QoS4REDProfileDp1ProbDP1 drop probability.ro INTEGER (-1 | 1..15) .1.3.6.1.4.1.6296.102.10.2.7.1.1.1.8 |
sleV2QoS4REDProfileDp2MinThresDP2 min threshold. Used only in case WRED Marvell : (1..65535), BCM : not supported.ro INTEGER (-1 | 0..65535) .1.3.6.1.4.1.6296.102.10.2.7.1.1.1.9 |
sleV2QoS4REDProfileDp2MaxThresDP2 max threshold. Used only in case WRED Marvell : (1..65535), BCM : not supported.ro INTEGER (-1 | 0..65535) .1.3.6.1.4.1.6296.102.10.2.7.1.1.1.10 |
sleV2QoS4REDProfileDp2ProbDP2 drop probability.ro INTEGER (-1 | 1..15) .1.3.6.1.4.1.6296.102.10.2.7.1.1.1.11 |
sleV2QoS4REDProfileWeightDrop weight, Used only in case WRED. BCM : not supported.ro INTEGER (-1 | 1..15) .1.3.6.1.4.1.6296.102.10.2.7.1.1.1.12 |
sleV2QoS4REDProfileControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.7.1.2 |
sleV2QoS4REDProfileControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.10.2.7.1.2.1 |
sleV2QoS4REDProfileControlStatusThe status of user commandro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.7.1.2.2 |
sleV2QoS4REDProfileControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.10.2.7.1.2.3 |
sleV2QoS4REDProfileControlTimeStampThe time stamp of the last command(end of command)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.102.10.2.7.1.2.4 |
sleV2QoS4REDProfileControlReqResultThe result of the last user commandro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.7.1.2.5 |
sleV2QoS4REDProfileControlIdThe index of RED profile. Marvell (1..4), BCM : number of portsrw INTEGER .1.3.6.1.4.1.6296.102.10.2.7.1.2.6 |
sleV2QoS4REDProfileControlQueueIdThe index of queuesrw INTEGER .1.3.6.1.4.1.6296.102.10.2.7.1.2.7 |
sleV2QoS4REDProfileControlDp0MinThresDP0 min threshold. In case RED, used as RED min threshold. Marvell (1..65535), BCM (0..127)rw INTEGER (-1 | 0..65535) .1.3.6.1.4.1.6296.102.10.2.7.1.2.8 |
sleV2QoS4REDProfileControlDp0MaxThresDP0 max threshold. Used only in case WRED. Marvell (1..65535), BCM: not supportedrw INTEGER (-1 | 0..65535) .1.3.6.1.4.1.6296.102.10.2.7.1.2.9 |
sleV2QoS4REDProfileControlDp0ProbDP0 Drop Probability In case RED, used as RED prob.rw INTEGER (-1 | 1..15) .1.3.6.1.4.1.6296.102.10.2.7.1.2.10 |
sleV2QoS4REDProfileControlDp1MinThresDP1 min threshold. Used only in case WRED. Marvell (1..65535), BCM: not supportedrw INTEGER (-1 | 0..65535) .1.3.6.1.4.1.6296.102.10.2.7.1.2.11 |
sleV2QoS4REDProfileControlDp1MaxThresDP1 max threshold. Used only in case WRED Marvell (1..65535), BCM: not supportedrw INTEGER (-1 | 0..65535) .1.3.6.1.4.1.6296.102.10.2.7.1.2.12 |
sleV2QoS4REDProfileControlDp1ProbDP1 Drop Probability. Used only in case WRED. BCM: not supportedrw INTEGER (-1 | 1..15) .1.3.6.1.4.1.6296.102.10.2.7.1.2.13 |
sleV2QoS4REDProfileControlDp2MinThresDP2 min threshold. Used only in case WRED Marvell (1..65535), BCM: not supportedrw INTEGER (-1 | 0..65535) .1.3.6.1.4.1.6296.102.10.2.7.1.2.14 |
sleV2QoS4REDProfileControlDp2MaxThresDP2 max threshold. Marvell (1..65535), BCM: not supportedrw INTEGER (-1 | 0..65535) .1.3.6.1.4.1.6296.102.10.2.7.1.2.15 |
sleV2QoS4REDProfileControlDp2ProbDP2 Drop Probability. Used only in case WRED. BCM: not supportedrw INTEGER (-1 | 1..15) .1.3.6.1.4.1.6296.102.10.2.7.1.2.16 |
sleV2QoS4REDProfileControlWeightDrop weight. Used only in case WRED. BCM: not supportedrw INTEGER (-1 | 1..15) .1.3.6.1.4.1.6296.102.10.2.7.1.2.17 |
sleV2QoS4REDProfileNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.7.1.3 |
sleV2QS4REDProfileChangedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.7.1.3.1 |
sleV2QS4REDProfileClearedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.7.1.3.2 |
sleV2QoS4PortREDInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.7.2 |
sleV2QoS4PortREDInfoTableport redundancy info table. SEQUENCE OF SleV2QoS4PortREDInfoEntry .1.3.6.1.4.1.6296.102.10.2.7.2.1 |
sleV2QoS4PortREDInfoEntrykey: sleV2QoS4PortREDInfoInterfaceIndex SleV2QoS4PortREDInfoEntry .1.3.6.1.4.1.6296.102.10.2.7.2.1.1 |
sleV2QoS4PortREDInfoInterfaceIndexInrterface Indexro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6296.102.10.2.7.2.1.1.1 |
sleV2QoS4PortREDInfoEnableRED/WRED enable flag BCM: only available RED, Marvell: only available WREDro Enumeration .1.3.6.1.4.1.6296.102.10.2.7.2.1.1.2 |
sleV2QoS4PortREDInfoProfileIdRED profile index. In case sleV2QoS4PortREDInfoEnable == disable, invalid Marvell : (1..4), BCM : number of ports In case BCM, this value is equal to port index. (read-only)ro INTEGER (-1 | 1..255) .1.3.6.1.4.1.6296.102.10.2.7.2.1.1.3 |
sleV2QoS4PortREDInfoControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.7.2.2 |
sleV2QoS4PortREDInfoControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.10.2.7.2.2.1 |
sleV2QoS4PortREDInfoControlStatusThe status of user commandro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.7.2.2.2 |
sleV2QoS4PortREDInfoControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.10.2.7.2.2.3 |
sleV2QoS4PortREDInfoControlTimeStampThe time stamp of the last command(end of command)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.102.10.2.7.2.2.4 |
sleV2QoS4PortREDInfoControlReqResultThe result of the last user commandro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.7.2.2.5 |
sleV2QoS4PortREDInfoControlInterfaceIndexInrterface Indexrw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6296.102.10.2.7.2.2.6 |
sleV2QoS4PortREDInfoControlEnableRED/WRED enable flagrw Enumeration .1.3.6.1.4.1.6296.102.10.2.7.2.2.7 |
sleV2QoS4PortREDInfoControlProfileIdRED profile index. This value is valid only when sleV2QoS4PortREDInfoEnable is equal to RED or WRED only, valid. Marvell : (1..4), BCM : number of ports In case BCM, this value is equal to port index. (read-only)rw INTEGER (-1 | 1..255) .1.3.6.1.4.1.6296.102.10.2.7.2.2.8 |
sleV2QoS4PortREDInfoNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.7.2.3 |
sleV2QoS4PortREDInfoChangedsetPortREDInfo NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.7.2.3.1 |
sleV2QoS4Queue OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.8 |
sleV2QoS4QueueInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.8.1 |
sleV2QoS4QueueInfoTablequeue info table. SEQUENCE OF SleV2QoS4QueueInfoEntry .1.3.6.1.4.1.6296.102.10.2.8.1.1 |
sleV2QoS4QueueInfoEntrykey: sleV2QoS4QueueInfoInterfaceIndex, sleV2QoS4QueueInfoId SleV2QoS4QueueInfoEntry .1.3.6.1.4.1.6296.102.10.2.8.1.1.1 |
sleV2QoS4QueueInfoInterfaceIndexInrterface Indexro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6296.102.10.2.8.1.1.1.1 |
sleV2QoS4QueueInfoIdThe index of queuero INTEGER .1.3.6.1.4.1.6296.102.10.2.8.1.1.1.2 |
sleV2QoS4QueueInfoScheduleModeSchedule mode of queue.ro Enumeration .1.3.6.1.4.1.6296.102.10.2.8.1.1.1.3 |
sleV2QoS4QueueInfoDWRRGroupQueue dwrr groupro Enumeration .1.3.6.1.4.1.6296.102.10.2.8.1.1.1.4 |
sleV2QoS4QueueInfoMinBandwidthMin bandwidth of queuero Integer32 .1.3.6.1.4.1.6296.102.10.2.8.1.1.1.5 |
sleV2QoS4QueueInfoMaxBandwidthMax bandwidth of queuero Integer32 .1.3.6.1.4.1.6296.102.10.2.8.1.1.1.6 |
sleV2QoS4QueueInfoWeightWeight of queue BCM (1..15), Marvell (6..255)ro INTEGER (-1 | 1..255) .1.3.6.1.4.1.6296.102.10.2.8.1.1.1.7 |
sleV2QoS4QueueMappedCoSMapped cosro INTEGER .1.3.6.1.4.1.6296.102.10.2.8.1.1.1.8 |
sleV2QoS4QueueInfoBufferEgressMinLimitUnicastBuffer Egress Min Limit for unicast Queue.ro Integer32 .1.3.6.1.4.1.6296.102.10.2.8.1.1.1.9 |
sleV2QoS4QueueInfoBufferEgressMaxLimitPolicyUnicastPolicy to Buffer Egress Max Limit for unicast Queue.ro Enumeration .1.3.6.1.4.1.6296.102.10.2.8.1.1.1.10 |
sleV2QoS4QueueInfoBufferEgressMaxLimitUnicastBuffer Egress Max Limit for unicast Queue.ro Integer32 .1.3.6.1.4.1.6296.102.10.2.8.1.1.1.11 |
sleV2QoS4QueueInfoBufferEgressMinLimitNonUnicastBuffer Egress Min Limit for non-unicast Queue.ro Integer32 .1.3.6.1.4.1.6296.102.10.2.8.1.1.1.12 |
sleV2QoS4QueueInfoBufferEgressMaxLimitPolicyNonUnicastPolicy to Buffer Egress Max Limit for non-unicast Queue.ro Enumeration .1.3.6.1.4.1.6296.102.10.2.8.1.1.1.13 |
sleV2QoS4QueueInfoBufferEgressMaxLimitNonUnicastBuffer Egress Max Limit for non-unicast Queue.ro Integer32 .1.3.6.1.4.1.6296.102.10.2.8.1.1.1.14 |
sleV2QoS4QueueInfoControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.8.1.2 |
sleV2QoS4QueueInfoControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.10.2.8.1.2.1 |
sleV2QoS4QueueInfoControlStatusThe status of user commandro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.8.1.2.2 |
sleV2QoS4QueueInfoControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.10.2.8.1.2.3 |
sleV2QoS4QueueInfoControlTimeStampThe time stamp of the last command(end of command)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.102.10.2.8.1.2.4 |
sleV2QoS4QueueInfoControlReqResultThe result of the last user commandro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.8.1.2.5 |
sleV2QoS4QueueInfoControlInterfaceIndexInrterface Indexrw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6296.102.10.2.8.1.2.6 |
sleV2QoS4QueueInfoControlIdThe index of queuerw INTEGER .1.3.6.1.4.1.6296.102.10.2.8.1.2.7 |
sleV2QoS4QueueInfoControlScheduleModeSchedule mode of queue. ( V5524 : sp, wrr, wfq, V5212G : sp, wrr, V5424G : sp, wrr, drr V6424 : sp, dwrr )rw Enumeration .1.3.6.1.4.1.6296.102.10.2.8.1.2.8 |
sleV2QoS4QueueInfoControlDWRRGroupQueue dwrr group ( V6424 )rw Enumeration .1.3.6.1.4.1.6296.102.10.2.8.1.2.9 |
sleV2QoS4QueueInfoControlMinBandwidthMin bandwidth of queue. ( V5524 : wfq, V5424G : drr, V6424 : dwrr )rw Integer32 .1.3.6.1.4.1.6296.102.10.2.8.1.2.10 |
sleV2QoS4QueueInfoControlMaxBandwidthMax bandwidth of queuerw Integer32 .1.3.6.1.4.1.6296.102.10.2.8.1.2.11 |
sleV2QoS4QueueInfoControlWeightWeight of queue BCM (1..15), Marvell (6..255) ( V5524, V5212G, V5424G : wrr, V6424 : dwrr )rw INTEGER .1.3.6.1.4.1.6296.102.10.2.8.1.2.12 |
sleV2QoS4QueueInfoControlMappedCoSMapped cosrw INTEGER .1.3.6.1.4.1.6296.102.10.2.8.1.2.13 |
sleV2QoS4QueueInfoControlBufferEgressMinLimitUnicastBuffer Egress Min Limit for unicast Queue.rw Integer32 .1.3.6.1.4.1.6296.102.10.2.8.1.2.14 |
sleV2QoS4QueueInfoControlBufferEgressMaxLimitPolicyUnicastPolicy to Buffer Egress Max Limit for unicast Queue.rw Enumeration .1.3.6.1.4.1.6296.102.10.2.8.1.2.15 |
sleV2QoS4QueueInfoControlBufferEgressMaxLimitUnicastBuffer Egress Max Limit for unicast Queue.rw Integer32 .1.3.6.1.4.1.6296.102.10.2.8.1.2.16 |
sleV2QoS4QueueInfoControlBufferEgressMinLimitNonUnicastBuffer Egress Min Limit for non-unicast Queue.rw Integer32 .1.3.6.1.4.1.6296.102.10.2.8.1.2.17 |
sleV2QoS4QueueInfoControlBufferEgressMaxLimitPolicyNonUnicastPolicy to Buffer Egress Max Limit for non-unicast Queue.rw Enumeration .1.3.6.1.4.1.6296.102.10.2.8.1.2.18 |
sleV2QoS4QueueInfoControlBufferEgressMaxLimitNonUnicastBuffer Egress Max Limit for non-unicast Queue.rw Integer32 .1.3.6.1.4.1.6296.102.10.2.8.1.2.19 |
sleV2QoS4QueueInfoNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.8.1.3 |
sleV2QoS4QueueInfoChangedsetQueueInfo NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.8.1.3.1 |
sleV2QoS4QueueInfoScheduleModeChangedsetScheduleMode NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.8.1.3.2 |
sleV2QoS4QueueInfoMaxBandwidthChangedsetMaxBandwidth NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.8.1.3.3 |
sleV2QoS4QueueInfoMinBandwidthChangedsetMinBandwidth NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.8.1.3.4 |
sleV2QoS4QueueInfoWeightChangedsetWeight NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.8.1.3.5 |
sleV2QoS4QueueInfoBufferEgressMinLimitUnicastChangedsetBufferEgressMinLimitUnicast NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.8.1.3.6 |
sleV2QoS4QueueInfoBufferEgressMinLimitUnicastClearedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.8.1.3.7 |
sleV2QoS4QueueInfoBufferEgressMaxLimitUnicastChangedsetBufferEgressMaxLimitUnicast NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.8.1.3.8 |
sleV2QoS4QueueInfoBufferEgressMaxLimitUnicastClearedclearBufferEgressMaxLimitUnicast NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.8.1.3.9 |
sleV2QoS4QueueInfoBufferEgressMinLimitNonUnicastChangedsetBufferEgressMinLimitNonUnicast NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.8.1.3.10 |
sleV2QoS4QueueInfoBufferEgressMinLimitNonUnicastClearedclearBufferEgressMinLimitNonUnicast NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.8.1.3.11 |
sleV2QoS4QueueInfoBufferEgressMaxLimitNonUnicastChangedsetBufferEgressMaxLimitNonUnicast NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.8.1.3.12 |
sleV2QoS4QueueInfoBufferEgressMaxLimitNonUnicastClearedclearBufferEgressMaxLimitNonUnicast NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.8.1.3.13 |
sleV2QoS4DscpMap OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.9 |
sleV2QoS4DscpMapIngress OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.9.1 |
sleV2QoS4DscpMapIngressTableDSCP map ingress table. SEQUENCE OF SleV2QoS4DscpMapIngressEntry .1.3.6.1.4.1.6296.102.10.2.9.1.1 |
sleV2QoS4DscpMapIngressEntrykey: sleV2QoS4DscpMapIngressDscpIndex SleV2QoS4DscpMapIngressEntry .1.3.6.1.4.1.6296.102.10.2.9.1.1.1 |
sleV2QoS4DscpMapIngressDscpIndexIngress DSCP mapping index. The index value of 1~ 64 mean 0 ~ 63 of the DSCP.ro INTEGER .1.3.6.1.4.1.6296.102.10.2.9.1.1.1.1 |
sleV2QoS4DscpMapIngressDscpDSCP value.ro OCTET STRING .1.3.6.1.4.1.6296.102.10.2.9.1.1.1.2 |
sleV2QoS4DscpMapIngressCosThe Class of Service.ro INTEGER .1.3.6.1.4.1.6296.102.10.2.9.1.1.1.3 |
sleV2QoS4DscpMapIngressColorSpecify color by Internal DP.ro Enumeration .1.3.6.1.4.1.6296.102.10.2.9.1.1.1.4 |
sleV2QoS4DscpMapIngressControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.9.1.2 |
sleV2QoS4DscpMapIngressControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.10.2.9.1.2.1 |
sleV2QoS4DscpMapIngressControlStatusThe status of user commandro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.9.1.2.2 |
sleV2QoS4DscpMapIngressControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.10.2.9.1.2.3 |
sleV2QoS4DscpMapIngressControlTimeStampThe time stamp of the last command(end of command)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.102.10.2.9.1.2.4 |
sleV2QoS4DscpMapIngressControlReqResultThe result of the last user commandro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.9.1.2.5 |
sleV2QoS4DscpMapIngressControlDscpIndexIngress DSCP mapping index. The index value of 1~ 64 mean 0 ~ 63 of the DSCP.rw INTEGER .1.3.6.1.4.1.6296.102.10.2.9.1.2.6 |
sleV2QoS4DscpMapIngressControlDscpDSCP value.rw INTEGER .1.3.6.1.4.1.6296.102.10.2.9.1.2.7 |
sleV2QoS4DscpMapIngressControlCosThe Class of Service.rw INTEGER .1.3.6.1.4.1.6296.102.10.2.9.1.2.8 |
sleV2QoS4DscpMapIngressControlColorSpecify color by Internal DP.rw Enumeration .1.3.6.1.4.1.6296.102.10.2.9.1.2.9 |
sleV2QoS4DscpMapIngressNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.9.1.3 |
sleV2QoS4DscpMapIngressChangedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.9.1.3.1 |
sleV2QoS4DscpMapTunnel OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.9.2 |
sleV2QoS4DscpMapTunnelTableDSCP map tunnel table. SEQUENCE OF SleV2QoS4DscpMapTunnelEntry .1.3.6.1.4.1.6296.102.10.2.9.2.1 |
sleV2QoS4DscpMapTunnelEntrykey: sleV2QoS4DscpMapTunnelPriority, sleV2QoS4DscpMapTunnelColor SleV2QoS4DscpMapTunnelEntry .1.3.6.1.4.1.6296.102.10.2.9.2.1.1 |
sleV2QoS4DscpMapTunnelPriorityInternal packet priority. The index value of 1 ~ 8 mean 0 ~ 7 of the priority.ro INTEGER .1.3.6.1.4.1.6296.102.10.2.9.2.1.1.1 |
sleV2QoS4DscpMapTunnelColorSpecify color by Internal DP.ro Enumeration .1.3.6.1.4.1.6296.102.10.2.9.2.1.1.2 |
sleV2QoS4DscpMapTunnelDscpDSCP value.ro INTEGER .1.3.6.1.4.1.6296.102.10.2.9.2.1.1.3 |
sleV2QoS4DscpMapTunnelControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.9.2.2 |
sleV2QoS4DscpMapTunnelControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.102.10.2.9.2.2.1 |
sleV2QoS4DscpMapTunnelControlStatusThe status of user commandro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.9.2.2.2 |
sleV2QoS4DscpMapTunnelControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.102.10.2.9.2.2.3 |
sleV2QoS4DscpMapTunnelControlTimeStampThe time stamp of the last command(end of command)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.102.10.2.9.2.2.4 |
sleV2QoS4DscpMapTunnelControlReqResultThe result of the last user commandro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.102.10.2.9.2.2.5 |
sleV2QoS4DscpMapTunnelControlPriorityInternal packet priority. The index value of 1 ~ 8 mean 0 ~ 7 of the priority.rw INTEGER .1.3.6.1.4.1.6296.102.10.2.9.2.2.6 |
sleV2QoS4DscpMapTunnelControlColorSpecify color by Internal DP.rw Enumeration .1.3.6.1.4.1.6296.102.10.2.9.2.2.7 |
sleV2QoS4DscpMapTunnelControlDscpDSCP value.rw INTEGER .1.3.6.1.4.1.6296.102.10.2.9.2.2.8 |
sleV2QoS4DscpMapTunnelNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.2.9.2.3 |
sleV2QoS4DscpMapTunnelChangedDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.6296.102.10.2.9.2.3.1 |
sleV2QoS6 OBJECT IDENTIFIER .1.3.6.1.4.1.6296.102.10.3 |
sleV2QoSGroupDescription. Unknown .1.3.6.1.4.1.6296.102.10.4 |
sleV2QoSNotificationGroupDescription. Unknown .1.3.6.1.4.1.6296.102.10.5 |