Home/Catalog/SLE-QOS-MIB

SLE-QOS-MIB

Description.
Main OID:
sleQoS.1.3.6.1.4.1.6296.101.10
260
Objects
Active
Status
4
Dependencies

Imported Objects

DASAN-SMI
SLE-TC-MIB
SNMPv2-CONF
SNMPv2-SMI

Objects

260 total
Object Name
sleQoSDescription.
MODULE-IDENTITY
.1.3.6.1.4.1.6296.101.10
sleQoSBase
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.10.1
sleQoSBaseInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.10.1.1
sleQosUserFlowNumDescription.ro
Unsigned32
.1.3.6.1.4.1.6296.101.10.1.1.1
sleQosTrafficProfileNumDescription.ro
Unsigned32
.1.3.6.1.4.1.6296.101.10.1.1.2
sleQosCounterNumDescription.ro
Unsigned32
.1.3.6.1.4.1.6296.101.10.1.1.3
sleQosQueueNumDescription.ro
Unsigned32
.1.3.6.1.4.1.6296.101.10.1.1.4
sleQosColorMarkingProfileNumDescription.ro
Integer32
.1.3.6.1.4.1.6296.101.10.1.1.5
sleQosRuleModeDescription.ro
Enumeration
.1.3.6.1.4.1.6296.101.10.1.1.6
sleQoSBaseControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.10.1.2
sleQoSBaseControlRequestDescription.rw
Enumeration
.1.3.6.1.4.1.6296.101.10.1.2.1
sleQoSBaseControlStatusDescription.ro
SleControlStatusType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.10.1.2.2
sleQoSBaseControlTimerDescription.rw
Gauge32
.1.3.6.1.4.1.6296.101.10.1.2.3
sleQoSBaseControlTimeStampDescription.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.10.1.2.4
sleQoSBaseControlReqResultDescription.ro
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.10.1.2.5
sleQoSBaseControlRuleModeDescription.rw
Enumeration
.1.3.6.1.4.1.6296.101.10.1.2.6
sleQoSBaseNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.10.1.3
sleQoSBaseRuleModeChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.10.1.3.1
sleTrafficProfile
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.10.2
sleTrafficProfileTableDescription.
SEQUENCE OF SleTrafficProfileEntry
.1.3.6.1.4.1.6296.101.10.2.1
sleTrafficProfileEntryDescription.
SleTrafficProfileEntry
.1.3.6.1.4.1.6296.101.10.2.1.1
sleTrafficProfileIndexmeter Indexro
Unsigned32
.1.3.6.1.4.1.6296.101.10.2.1.1.1
sleTrafficProfileMinBandwidthThe value is in unit for 64 kbpsro
Integer32
.1.3.6.1.4.1.6296.101.10.2.1.1.2
sleTrafficProfileMaxBandwidthThe value is in unit for 64 kbpsro
Integer32
.1.3.6.1.4.1.6296.101.10.2.1.1.3
sleTrafficProfileMaxBurstSizeThe size of the bucket used for meteringro
Integer32
.1.3.6.1.4.1.6296.101.10.2.1.1.4
sleTrafficProfileUseCountDescription.ro
Integer32
.1.3.6.1.4.1.6296.101.10.2.1.1.5
sleTrafficProfileControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.10.2.2
sleTrafficProfileControlRequestDescription.rw
SleTrafficProfileControlRequestType
.1.3.6.1.4.1.6296.101.10.2.2.1
sleTrafficProfileControlStatusDescription.ro
SleControlStatusType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.10.2.2.2
sleTrafficProfileControlTimerDescription.rw
Gauge32
.1.3.6.1.4.1.6296.101.10.2.2.3
sleTrafficProfileControlTimeStampDescription.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.10.2.2.4
sleTrafficProfileControlReqResultResult of last commandro
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.10.2.2.5
sleTrafficProfileControlIndexmeter Indexrw
Integer32
.1.3.6.1.4.1.6296.101.10.2.2.6
sleTrafficProfileControlMinBandwidthThe value is in unit for 64 kbpsrw
Integer32
.1.3.6.1.4.1.6296.101.10.2.2.7
sleTrafficProfileControlMaxBandwidthThe value is in unit for 64 kbpsrw
Integer32
.1.3.6.1.4.1.6296.101.10.2.2.8
sleTrafficProfileControlMaxBurstSizeThe size of the bucket used for meteringrw
Integer32
.1.3.6.1.4.1.6296.101.10.2.2.9
sleTrafficProfileNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.10.2.3
sleTrafficProfileChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.10.2.3.1
sleUserFlow
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.10.3
sleUserFlowTableDescription.
SEQUENCE OF SleUserFlowEntry
.1.3.6.1.4.1.6296.101.10.3.1
sleUserFlowEntryDescription.
SleUserFlowEntry
.1.3.6.1.4.1.6296.101.10.3.1.1
sleUserFlowNameThe name of this user flow.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.10.3.1.1.1
sleUserFlowIngressPortsIngress port numberro
OCTET STRING
.1.3.6.1.4.1.6296.101.10.3.1.1.2
sleUserFlowEgressPortsEgress Port Numberro
OCTET STRING
.1.3.6.1.4.1.6296.101.10.3.1.1.3
sleUserFlowEthernetTypeThe ethernet type value in incoming framesro
Integer32
.1.3.6.1.4.1.6296.101.10.3.1.1.4
sleUserFlowSrcMacAddrSource MAC addressro
OCTET STRING
.1.3.6.1.4.1.6296.101.10.3.1.1.5
sleUserFlowDstMacAddrDestination MAC addressro
OCTET STRING
.1.3.6.1.4.1.6296.101.10.3.1.1.6
sleUserFlowVlanVLAN IDro
Integer32
.1.3.6.1.4.1.6296.101.10.3.1.1.7
sleUserFlow8021pThe value of the IEEE802.1p priority in the packetro
Integer32
.1.3.6.1.4.1.6296.101.10.3.1.1.8
sleUserFlowSrcIpAddrThe IP address to match against the packet's source IP address.ro
IpAddress
.1.3.6.1.4.1.6296.101.10.3.1.1.9
sleUserFlowSrcPrefixLengthSubnet mask. The length of 0 indicates a match of any addressro
Integer32
.1.3.6.1.4.1.6296.101.10.3.1.1.10
sleUserFlowDstIpAddrThe IP address to match against the packet's destination IP address.ro
IpAddress
.1.3.6.1.4.1.6296.101.10.3.1.1.11
sleUserFlowDstPrefixLengthSubnet mask. The length of 0 indicates a match of any addressro
Integer32
.1.3.6.1.4.1.6296.101.10.3.1.1.12
sleUserFlowIpPktPriorityTypeDescription.ro
Enumeration
.1.3.6.1.4.1.6296.101.10.3.1.1.13
sleUserFlowIpPktPriorityThe Priority value in incoming IP packet. If sleUserFlowIpPktPriorityType is 1, this value's range is 0-7. If sleUserFlowIpPktPriorityType is 2, this value's range is 0-63. If sleUserFlowIpPktPriorityType is 3, this value's range is 0-255.ro
Integer32
.1.3.6.1.4.1.6296.101.10.3.1.1.14
sleUserFlowProtocolTypeThe IP protocol type valuero
Integer32
.1.3.6.1.4.1.6296.101.10.3.1.1.15
sleUserFlowTcpFlagTCP Flagsro
Bits
.1.3.6.1.4.1.6296.101.10.3.1.1.16
sleUserFlowSrcL4PortThe source L4 port number, only valid for TCP or UDP packets.ro
Integer32
.1.3.6.1.4.1.6296.101.10.3.1.1.17
sleUserFlowDstL4PortThe destination L4 port number, only valid for TCP or UDP packets.ro
Integer32
.1.3.6.1.4.1.6296.101.10.3.1.1.18
sleUserFlowPktLenThe packet length of the incoming packetro
Integer32
.1.3.6.1.4.1.6296.101.10.3.1.1.19
sleUserFlowValidFlagsUser Flow Valid Flagsro
Bits
.1.3.6.1.4.1.6296.101.10.3.1.1.20
sleUserFlowMatchFlagsUser Flow Matching Flagsro
Bits
.1.3.6.1.4.1.6296.101.10.3.1.1.21
sleUserFlowPriorityThe priority of this user flowro
Enumeration
.1.3.6.1.4.1.6296.101.10.3.1.1.22
sleUserFlowMatchCounterIdThe counter index to be apply for the matched packets.ro
Integer32
.1.3.6.1.4.1.6296.101.10.3.1.1.23
sleUserFlowMatchTrafficProfileIdThe traffic profile index to be apply for the matched packets.ro
Integer32
.1.3.6.1.4.1.6296.101.10.3.1.1.24
sleUserFlowMatchQueueTThe CoS value to be assign for the nomatched packetsro
Integer32
.1.3.6.1.4.1.6296.101.10.3.1.1.25
sleUserFlowMatchIpPktPriorityTypeThe Priority type to be applied to incoming IP packet.ro
Enumeration
.1.3.6.1.4.1.6296.101.10.3.1.1.26
sleUserFlowMatchIpPktPriorityThe Priority value in incoming IP packet. If sleUserFlowMatchIpPktPriorityType is 1, then this value's range is 0-7. If sleUserFlowMatchIpPktPriorityType is 2, then this value's range is 0-63. If sleUserFlowMatchIpPktPriorityType is 3, then this value's range is 0-255.ro
Integer32
.1.3.6.1.4.1.6296.101.10.3.1.1.27
sleUserFlowMatchRedirPortThe port to redirect to a matched packet.ro
Integer32
.1.3.6.1.4.1.6296.101.10.3.1.1.28
sleUserFlowMatchVidThe vlan id to be assigned for the matched packetsro
Integer32
.1.3.6.1.4.1.6296.101.10.3.1.1.29
sleUserFlowMatchDstMacDescription.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.10.3.1.1.30
sleUserFlowMatchPortMapDescription.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.10.3.1.1.31
sleUserFlowMatchEgressTypeDescription.ro
Enumeration
.1.3.6.1.4.1.6296.101.10.3.1.1.32
sleUserFlowMatchActionThe action to be apply for matched packets.ro
Bits
.1.3.6.1.4.1.6296.101.10.3.1.1.33
sleUserFlowNomatchCounterIdThe counter index to be apply for the nomatched packets.ro
Integer32
.1.3.6.1.4.1.6296.101.10.3.1.1.34
sleUserFlowNomatchTrafficProfileIdThe traffic profile index to be apply for the nomatched packets.ro
Integer32
.1.3.6.1.4.1.6296.101.10.3.1.1.35
sleUserFlowNomatchQueueThe CoS value to be assign for the nomatched packetsro
Integer32
.1.3.6.1.4.1.6296.101.10.3.1.1.36
sleUserFlowNomatchIpPktPriorityTypeThe Priority type to be applied to incoming IP packet, in case nomatched.ro
Enumeration
.1.3.6.1.4.1.6296.101.10.3.1.1.37
sleUserFlowNomatchIpPktPriorityThe Priority value in incoming IP packet. If sleUserFlowNomatchIpPktPriorityType is 1, then this value's range is 0-7. If sleUserFlowNomatchIpPktPriorityType is 2, then this value's range is 0-63. If sleUserFlowNomatchIpPktPriorityType is 3, then this value's range is 0-255.ro
Integer32
.1.3.6.1.4.1.6296.101.10.3.1.1.38
sleUserFlowNomatchRedirPortThe port to redirect to nomatched packet.ro
Integer32
.1.3.6.1.4.1.6296.101.10.3.1.1.39
sleUserFlowNomatchVidThe vlan id to be assigned for the nomatched packetsro
Integer32
.1.3.6.1.4.1.6296.101.10.3.1.1.40
sleUserFlowNomatchActionThe action to be apply for nomatched packets.ro
Bits
.1.3.6.1.4.1.6296.101.10.3.1.1.41
sleUserFlowMatchColorMarkingIdThe colormarking profile index to be apply for the matched packet.ro
Integer32
.1.3.6.1.4.1.6296.101.10.3.1.1.42
sleUserFlowNomatchColorMarkingIdThe colormarking profile index to be apply for the unmatched packet. (not supported)ro
Integer32
.1.3.6.1.4.1.6296.101.10.3.1.1.43
sleUserFlowInnerVlanInner VLAN ID in QinQro
Integer32
.1.3.6.1.4.1.6296.101.10.3.1.1.44
sleUserFlowInner8021pThe value of the inner IEEE802.1p priority in the packetro
Integer32
.1.3.6.1.4.1.6296.101.10.3.1.1.45
sleUserFlowMatchRoutePrimaryThe policy-based-routing primary routero
IpAddress
.1.3.6.1.4.1.6296.101.10.3.1.1.46
sleUserFlowMatchRouteSecondaryThe policy-based-routing secondary routero
IpAddress
.1.3.6.1.4.1.6296.101.10.3.1.1.47
sleUserFlowControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.10.3.2
sleUserFlowControlReqestDescription.rw
SleUserFlowControlRequestType
.1.3.6.1.4.1.6296.101.10.3.2.1
sleUserFlowControlStatusDescription.ro
SleControlStatusType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.10.3.2.2
sleUserFlowControlTimerDescription.rw
Gauge32
.1.3.6.1.4.1.6296.101.10.3.2.3
sleUserFlowControlTimeStampDescription.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.10.3.2.4
sleUserFlowControlReqResultDescription.ro
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.10.3.2.5
sleUserFlowControlNameDescription.rw
OCTET STRING
.1.3.6.1.4.1.6296.101.10.3.2.6
sleUserFlowControlIngressPortsIngress portrw
OCTET STRING
.1.3.6.1.4.1.6296.101.10.3.2.7
sleUserFlowControlEgressPortsEgress portrw
OCTET STRING
.1.3.6.1.4.1.6296.101.10.3.2.8
sleUserFlowControlEthernetTypeDescription.rw
Integer32
.1.3.6.1.4.1.6296.101.10.3.2.9
sleUserFlowControlSrcMacAddrSource MAC addressrw
OCTET STRING
.1.3.6.1.4.1.6296.101.10.3.2.10
sleUserFlowControlDstMacAddrDestination MAC addressrw
OCTET STRING
.1.3.6.1.4.1.6296.101.10.3.2.11
sleUserFlowControlVlanVlan IDrw
Integer32
.1.3.6.1.4.1.6296.101.10.3.2.12
sleUserFlowControl8021pThe value of the IEEE802.1p priority in the packetrw
Integer32
.1.3.6.1.4.1.6296.101.10.3.2.13
sleUserFlowControlSrcIpAddrThe IP address to match against the packet's source IP address.rw
IpAddress
.1.3.6.1.4.1.6296.101.10.3.2.14
sleUserFlowControlSrcPrefixLengthSubnet mask. The length of 0 indicates a match of any addressrw
Integer32
.1.3.6.1.4.1.6296.101.10.3.2.15
sleUserFlowControlDstIpAddrThe IP address to match against the packet's destination IP address.rw
IpAddress
.1.3.6.1.4.1.6296.101.10.3.2.16
sleUserFlowControlDstPrefixLengthSubnet mask. The length of 0 indicates a match of any addressrw
Integer32
.1.3.6.1.4.1.6296.101.10.3.2.17
sleUserFlowControlIpPktPriorityTypeDescription.rw
Enumeration
.1.3.6.1.4.1.6296.101.10.3.2.18
sleUserFlowControlIpPktPriorityThe Priority value in incoming IP packet. If sleUserFlowControlIpPktPriorityType is 1, this value's range is 0-7. If sleUserFlowControlIpPktPriorityType is 2, this value's range is 0-63. If sleUserFlowControlIpPktPriorityType is 3, this value's range is 0-255.rw
Integer32
.1.3.6.1.4.1.6296.101.10.3.2.19
sleUserFlowControlProtocolTypeThe IP protocol type valuerw
Integer32
.1.3.6.1.4.1.6296.101.10.3.2.20
sleUserFlowControlTcpFlagDescription.rw
Bits
.1.3.6.1.4.1.6296.101.10.3.2.21
sleUserFlowControlSrcL4PortThe source L4 port number, only valid for TCP or UDP packets.rw
Integer32
.1.3.6.1.4.1.6296.101.10.3.2.22
sleUserFlowControlDstL4PortThe destination L4 port number, only valid for TCP or UDP packets.rw
Integer32
.1.3.6.1.4.1.6296.101.10.3.2.23
sleUserFlowControlPktLenThe packet length of the incoming packetrw
Integer32
.1.3.6.1.4.1.6296.101.10.3.2.24
sleUserFlowControlValidFlagThe ICMP type, only valid for ICMP packets.rw
Bits
.1.3.6.1.4.1.6296.101.10.3.2.25
sleUserFlowControlMatchFlagThe ICMP code, only valid for ICMP packets.rw
Bits
.1.3.6.1.4.1.6296.101.10.3.2.26
sleUserFlowControlPriorityThe priority of this user flowrw
Enumeration
.1.3.6.1.4.1.6296.101.10.3.2.27
sleUserFlowControlMatchCounterIdThe counter index to be apply for the matched packets.rw
Integer32
.1.3.6.1.4.1.6296.101.10.3.2.28
sleUserFlowControlMatchTrafficProfileIdThe traffic profile index to be apply for the matched packets.rw
Integer32
.1.3.6.1.4.1.6296.101.10.3.2.29
sleUserFlowControlMatchQueueThe CoS value to be assign for the matched packetsrw
Integer32
.1.3.6.1.4.1.6296.101.10.3.2.30
sleUserFlowControlMatchIpPktPriorityTypeDescription.rw
Enumeration
.1.3.6.1.4.1.6296.101.10.3.2.31
sleUserFlowControlMatchIpPktPriorityThe Priority value in incoming IP packet. If type is 1, then this value's range is 0-7. If type is 2, then this value's range is 0-63. If type is 3, then this value's range is 0-255.rw
Integer32
.1.3.6.1.4.1.6296.101.10.3.2.32
sleUserFlowControlMatchRedirPortThe port to redirect to a matched packet.rw
Integer32
.1.3.6.1.4.1.6296.101.10.3.2.33
sleUserFlowControlMatchVidThe vlan id to be assigned for the matched packetsrw
Integer32
.1.3.6.1.4.1.6296.101.10.3.2.34
sleUserFlowControlMatchDstMacDescription.rw
OCTET STRING
.1.3.6.1.4.1.6296.101.10.3.2.35
sleUserFlowControlMatchPortMapDescription.rw
OCTET STRING
.1.3.6.1.4.1.6296.101.10.3.2.36
sleUserFlowControlMatchEgressTypeDescription.rw
Enumeration
.1.3.6.1.4.1.6296.101.10.3.2.37
sleUserFlowControlMatchActionThe action to be apply for matched packets.rw
Bits
.1.3.6.1.4.1.6296.101.10.3.2.38
sleUserFlowControlNomatchCounterIdThe counter index to be apply for the unmatched packets.rw
Integer32
.1.3.6.1.4.1.6296.101.10.3.2.39
sleUserFlowControlNomatchTrafficProfileIdThe traffic profile index to be apply for the unmatched packets.rw
Integer32
.1.3.6.1.4.1.6296.101.10.3.2.40
sleUserFlowControlNomatchQueueThe CoS value to be assign for the unmatched packetsrw
Integer32
.1.3.6.1.4.1.6296.101.10.3.2.41
sleUserFlowControlNomatchIpPktPriorityTypeDescription.rw
Enumeration
.1.3.6.1.4.1.6296.101.10.3.2.42
sleUserFlowControlNomatchIpPktPriorityThe Priority value in incoming IP packet. If type is 1, then this value's range is 0-7. If type is 2, then this value's range is 0-63. If type is 3, then this value's range is 0-255.rw
Integer32
.1.3.6.1.4.1.6296.101.10.3.2.43
sleUserFlowControlNomatchRedirPortThe port to redirect a unmatched packet.rw
Integer32
.1.3.6.1.4.1.6296.101.10.3.2.44
sleUserFlowControlNomatchVidThe vlan id to be assigned for the unmatched packetsrw
Integer32
.1.3.6.1.4.1.6296.101.10.3.2.45
sleUserFlowControlNomatchActionThe action to be apply for unmatched packets.rw
Bits
.1.3.6.1.4.1.6296.101.10.3.2.46
sleUserFlowControlMatchColorMarkingIdThe color marking profile index to be apply for the matched packet.rw
Integer32
.1.3.6.1.4.1.6296.101.10.3.2.47
sleUserFlowControlNomatchColorMarkingIdThe color marking profile index to be apply for the nomatched packet.rw
Integer32
.1.3.6.1.4.1.6296.101.10.3.2.48
sleUserFlowControlInnerVlanInner VLAN IDrw
Integer32
.1.3.6.1.4.1.6296.101.10.3.2.49
sleUserFlowControlInner8021pThe value of the Inner IEEE802.1p priority in the packetrw
Integer32
.1.3.6.1.4.1.6296.101.10.3.2.50
sleUserFlowControlMatchRoutePrimaryDescription.rw
IpAddress
.1.3.6.1.4.1.6296.101.10.3.2.51
sleUserFlowControlMatchRouteSecondaryDescription.rw
IpAddress
.1.3.6.1.4.1.6296.101.10.3.2.52
sleUserFlowNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.10.3.3
sleUserFlowCreatedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.10.3.3.1
sleUserFlowDestroyedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.10.3.3.2
sleUserFlowClassifierProfileChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.10.3.3.3
sleUserFlowMatchActionProfileChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.10.3.3.4
sleUserFlowNomatchActionProfileChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.10.3.3.5
slePortSchedule
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.10.4
slePortSchedultTableDescription.
SEQUENCE OF SlePortSchedultEntry
.1.3.6.1.4.1.6296.101.10.4.1
slePortSchedultEntryDescription.
SlePortSchedultEntry
.1.3.6.1.4.1.6296.101.10.4.1.1
slePortSchedulInterfaceIndexInterface Indexro
Integer32
.1.3.6.1.4.1.6296.101.10.4.1.1.1
slePortScheduleModeThe scheduling mode of portro
Enumeration
.1.3.6.1.4.1.6296.101.10.4.1.1.2
slePortScheduleControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.10.4.2
slePortScheduleControlRequestDescription.rw
SlePortScheduleControlRequestType
.1.3.6.1.4.1.6296.101.10.4.2.1
sleScheduleControlStatusDescription.ro
SleControlStatusType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.10.4.2.2
slePortScheduleControlTimerDescription.rw
Gauge32
.1.3.6.1.4.1.6296.101.10.4.2.3
slePortScheduleControlTimeStampDescription.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.10.4.2.4
slePortScheduleControlReqResultDescription.ro
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.10.4.2.5
slePortScheduleControlInterfaceIndexInterface Indexrw
Integer32
.1.3.6.1.4.1.6296.101.10.4.2.6
slePortScheduleControlModeThe scheduling mode of portrw
Enumeration
.1.3.6.1.4.1.6296.101.10.4.2.7
slePortScheduleNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.10.4.3
slePortScheduleModeChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.10.4.3.1
sleQueue
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.10.5
sleQueueTableDescription.
SEQUENCE OF SleQueueEntry
.1.3.6.1.4.1.6296.101.10.5.1
sleQueueEntryDescription.
SleQueueEntry
.1.3.6.1.4.1.6296.101.10.5.1.1
sleQueueIdqueue indexro
Integer32
.1.3.6.1.4.1.6296.101.10.5.1.1.1
sleQueueREDEnableDescription.ro
Enumeration
.1.3.6.1.4.1.6296.101.10.5.1.1.2
sleQueueMappedCoSDescription.ro
Bits
.1.3.6.1.4.1.6296.101.10.5.1.1.3
sleQueueWREDMinThresholdThe total number of packets where WRED can startro
Integer32
.1.3.6.1.4.1.6296.101.10.5.1.1.4
sleQueueWREDMaxThresholdAbove max threshold, queue drops all ingressro
Integer32
.1.3.6.1.4.1.6296.101.10.5.1.1.5
sleQueueWREDProbMaxThe worst case random drop probabilityro
Integer32
.1.3.6.1.4.1.6296.101.10.5.1.1.6
sleQueueMinBandwidthThe value is unit of 64kbpsro
Integer32
.1.3.6.1.4.1.6296.101.10.5.1.1.7
sleQueueMaxBandwidthThe value is unit of 64 kbps.ro
Integer32
.1.3.6.1.4.1.6296.101.10.5.1.1.8
sleQueueWeightThe weight of this queue. The value of -1 is unlimitedro
Integer32 (-1 | 1..255)
.1.3.6.1.4.1.6296.101.10.5.1.1.9
sleQueueMaxLatencyDescription.ro
Integer32
.1.3.6.1.4.1.6296.101.10.5.1.1.10
sleQueueMaxPacketsDescription.ro
Integer32
.1.3.6.1.4.1.6296.101.10.5.1.1.11
sleQueueQuantumThe DRR quantum value.ro
INTEGER (-1 | 1..127)
.1.3.6.1.4.1.6296.101.10.5.1.1.12
sleQueueUsedPktsThe used packets of port/queue.ro
Counter32
.1.3.6.1.4.1.6296.101.10.5.1.1.13
sleQueueUsedBytesThe used bytes of port/queue.ro
Counter32
.1.3.6.1.4.1.6296.101.10.5.1.1.14
sleQueueControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.10.5.2
sleQueueControlRequestDescription.rw
Enumeration
.1.3.6.1.4.1.6296.101.10.5.2.1
sleQueueControlStatusDescription.ro
Integer32
.1.3.6.1.4.1.6296.101.10.5.2.2
sleQueueControlTimerDescription.rw
Gauge32
.1.3.6.1.4.1.6296.101.10.5.2.3
sleQueueControlTimeStampDescription.ro
Integer32
.1.3.6.1.4.1.6296.101.10.5.2.4
sleQueueControlReqResultDescription.ro
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.10.5.2.5
sleQueueControlInterfaceIndexInterface Indexrw
Integer32
.1.3.6.1.4.1.6296.101.10.5.2.6
sleQueueControlIdQueue indexrw
Integer32
.1.3.6.1.4.1.6296.101.10.5.2.7
sleQueueControlREDEnableDescription.rw
Enumeration
.1.3.6.1.4.1.6296.101.10.5.2.8
sleQueueControlMappedCoSDescription.rw
Bits
.1.3.6.1.4.1.6296.101.10.5.2.9
sleQueueControlWREDMinThresholdThe total number of packets where WRED can startrw
Integer32
.1.3.6.1.4.1.6296.101.10.5.2.10
sleQueueControlWREDMaxThresholdAbove max threshold, queue drops all ingressrw
Integer32
.1.3.6.1.4.1.6296.101.10.5.2.11
sleQueueControlWREDProbMaxThe worst case random drop probabilityrw
Integer32
.1.3.6.1.4.1.6296.101.10.5.2.12
sleQueueControlMinBandwidthThe value is unit of 64kbpsrw
Integer32
.1.3.6.1.4.1.6296.101.10.5.2.13
sleQueueControlMaxBandwidthThe value is unit of 64kbpsrw
Integer32
.1.3.6.1.4.1.6296.101.10.5.2.14
sleQueueControlWeightThe weight of this queue. The value of -1 is unlimitedrw
Integer32 (-1 | 1..255)
.1.3.6.1.4.1.6296.101.10.5.2.15
sleQueueControlMaxLatencyDescription.rw
Integer32
.1.3.6.1.4.1.6296.101.10.5.2.16
sleQueueControlMaxPacketsDescription.rw
Integer32
.1.3.6.1.4.1.6296.101.10.5.2.17
sleQueueControlQuantumThe DRR quantum value.rw
INTEGER (-1 | 1..127)
.1.3.6.1.4.1.6296.101.10.5.2.18
sleQueueNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.10.5.3
sleQueueProfileChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.10.5.3.1
sleQueueQuantumChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.10.5.3.2
sleCounter
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.10.6
sleCounterTableDescription.
SEQUENCE OF SleCounterEntry
.1.3.6.1.4.1.6296.101.10.6.1
sleCounterEntryDescription.
SleCounterEntry
.1.3.6.1.4.1.6296.101.10.6.1.1
sleCounterIndexThe Counter Indexro
INTEGER
.1.3.6.1.4.1.6296.101.10.6.1.1.1
sleCounterPacketsNumber of packetsro
Unsigned32
.1.3.6.1.4.1.6296.101.10.6.1.1.2
sleCounterControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.10.6.2
sleCounterControlRequestDescription.rw
Enumeration
.1.3.6.1.4.1.6296.101.10.6.2.1
sleCounterControlStatusDescription.ro
SleControlStatusType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.10.6.2.2
sleCounterControlTimerDescription.rw
Gauge32
.1.3.6.1.4.1.6296.101.10.6.2.3
sleCounterControlTimeStampDescription.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.10.6.2.4
sleCounterControlReqResultDescription.ro
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.10.6.2.5
sleCounterControlIndexDescription.rw
Unsigned32
.1.3.6.1.4.1.6296.101.10.6.2.6
sleCounterNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.10.6.3
sleCounterClearedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.10.6.3.1
sleColorMarking
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.10.7
sleColorMarkingTableDescription.
SEQUENCE OF SleColorMarkingEntry
.1.3.6.1.4.1.6296.101.10.7.1
sleColorMarkingEntryDescription.
SleColorMarkingEntry
.1.3.6.1.4.1.6296.101.10.7.1.1
sleColorMarkingIndexColor marking table index.ro
INTEGER
.1.3.6.1.4.1.6296.101.10.7.1.1.1
sleColorMarkingTypeColor marking type. srTCM = Single Rate Three Color Marking. trTCM = Two Rate Three Color Marking.ro
Enumeration
.1.3.6.1.4.1.6296.101.10.7.1.1.2
sleColorMarkingModeColor marking mode.ro
Enumeration
.1.3.6.1.4.1.6296.101.10.7.1.1.3
sleColorMarkingAwareModeColor marking aware mode. Used only when sleColorMarkingMode is aware.ro
Enumeration
.1.3.6.1.4.1.6296.101.10.7.1.1.4
sleColorMarkingCIRCommitted Information Rate. The value is in unit for 64 kbps.ro
Integer32
.1.3.6.1.4.1.6296.101.10.7.1.1.5
sleColorMarkingCBSCommitted Burst Size. The value is in unit for square of 2 bits.ro
Integer32
.1.3.6.1.4.1.6296.101.10.7.1.1.6
sleColorMarkingPIRPeak Information Rate. *) Used only when sleColorMarkingMode is Aware. The value is in unit for 64 kbps. .ro
Integer32
.1.3.6.1.4.1.6296.101.10.7.1.1.7
sleColorMarkingPBSPeak Burst Size. *) Used only when sleColorMarkingMode is Aware. The value is in unit for square of 2 bits.ro
Integer32
.1.3.6.1.4.1.6296.101.10.7.1.1.8
sleColorMarkingEBSExcess Burst Size. *) Used only when sleColorMarkingMode is Blind. The value is in unit for square of 2 bits.ro
Integer32
.1.3.6.1.4.1.6296.101.10.7.1.1.9
sleColorMarkingRedActionThe action to be apply when incoming packet is colored in red.ro
Bits
.1.3.6.1.4.1.6296.101.10.7.1.1.10
sleColorMarkingYellowActionThe action to be apply when incoming packet is colored in yellow.ro
Bits
.1.3.6.1.4.1.6296.101.10.7.1.1.11
sleColorMarkingGreenActionThe action to be apply when incoming packet is colored in green. (not supported)ro
Bits
.1.3.6.1.4.1.6296.101.10.7.1.1.12
sleColorMarkingRedDscpThe dscp value to be apply when incoming packet is colored in red.ro
Integer32
.1.3.6.1.4.1.6296.101.10.7.1.1.13
sleColorMarkingYellowDscpThe dscp value to be apply when incoming packet is colored in yellow.ro
Integer32
.1.3.6.1.4.1.6296.101.10.7.1.1.14
sleColorMarkingGreenDscpThe dscp value to be apply when incoming packet is colored in green. (not supported)ro
Integer32
.1.3.6.1.4.1.6296.101.10.7.1.1.15
sleColorMarkingUseCountThe number of rules used this color marking profile.ro
Integer32
.1.3.6.1.4.1.6296.101.10.7.1.1.16
sleColorMarkingControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.10.7.2
sleColorMarkingControlReqestDescription.rw
Enumeration
.1.3.6.1.4.1.6296.101.10.7.2.1
sleColorMarkingControlStatusDescription.rw
SleControlStatusType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.10.7.2.2
sleColorMarkingControlTimerDescription.rw
Gauge32
.1.3.6.1.4.1.6296.101.10.7.2.3
sleColorMarkingControlTimeStampDescription.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.10.7.2.4
sleColorMarkingControlReqResultDescription.rw
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.10.7.2.5
sleColorMarkingControlIndexColor marking table indexrw
Integer32
.1.3.6.1.4.1.6296.101.10.7.2.6
sleColorMarkingControlTypeColor marking type. srTCM = Single Rate Three Color Marking. trTCM = Two Rate Three Color Marking.rw
Enumeration
.1.3.6.1.4.1.6296.101.10.7.2.7
sleColorMarkingControlModeColor marking moderw
Enumeration
.1.3.6.1.4.1.6296.101.10.7.2.8
sleColorMarkingControlAwareModeColor marking aware mode. Used only when sleColorMarkingControlMode is aware.rw
Enumeration
.1.3.6.1.4.1.6296.101.10.7.2.9
sleColorMarkingControlCIRCommitted Information Rate. The value is in unit for 64 kbpsrw
Integer32
.1.3.6.1.4.1.6296.101.10.7.2.10
sleColorMarkingControlCBSCommitted Burst Size. The value is in unit for square of 2 bits.rw
Integer32
.1.3.6.1.4.1.6296.101.10.7.2.11
sleColorMarkingControlPIRPeak Information Rate. *) Used only when sleColorMarkingMode is Aware. The value is in unit for 64 kbps.rw
Integer32
.1.3.6.1.4.1.6296.101.10.7.2.12
sleColorMarkingControlPBSPeak Burst Size. *) Used only when sleColorMarkingMode is Aware. The value is in unit for square of 2 bits.rw
Integer32
.1.3.6.1.4.1.6296.101.10.7.2.13
sleColorMarkingControlEBSExcess Burst Size. *) Used only when sleColorMarkingMode is Blind. The value is in unit for square of 2 bits.rw
Integer32
.1.3.6.1.4.1.6296.101.10.7.2.14
sleColorMarkingControlRedActionThe action to be apply when incoming packet is colored in red.rw
Bits
.1.3.6.1.4.1.6296.101.10.7.2.15
sleColorMarkingControlYellowActionThe action to be apply when incoming packet is colored in yellow.rw
Bits
.1.3.6.1.4.1.6296.101.10.7.2.16
sleColorMarkingControlGreenActionThe action to be apply when incoming packet is colored in green. (not supported)rw
Bits
.1.3.6.1.4.1.6296.101.10.7.2.17
sleColorMarkingControlRedDscpThe dscp value to be apply when incoming packet is colored in red.rw
Integer32
.1.3.6.1.4.1.6296.101.10.7.2.18
sleColorMarkingControlYellowDscpThe dscp value to be apply when incoming packet is colored in yellow.rw
Integer32
.1.3.6.1.4.1.6296.101.10.7.2.19
sleColorMarkingControlGreenDscpThe dscp value to be apply when incoming packet is colored in green. (not supported)rw
Integer32
.1.3.6.1.4.1.6296.101.10.7.2.20
sleColorMarkingNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.10.7.3
sleColorMarkingProfileChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.10.7.3.1
sleQoSGroupDescription.
Unknown
.1.3.6.1.4.1.6296.101.10.8
sleQoSControlGroupDescription.
Unknown
.1.3.6.1.4.1.6296.101.10.9
sleQoSNotificationGroupDescription.
Unknown
.1.3.6.1.4.1.6296.101.10.11
SLE-QOS-MIB - SNMP MIB Reference | MIBs Explorer