SLE-MPLS-TP-TUNNEL-STATISTICS-MIB
AI MIB Summary
The SLE-MPLS-TP-TUNNEL-STATISTICS-MIB module provides managed objects for monitoring traffic counters and performance metrics on MPLS Transport Profile (MPLS-TP) Label Switched Paths (LSPs). It enables the collection of statistical data, such as packet and byte counts, to facilitate the operational tracking and fault analysis of MPLS-TP tunnel interfaces.
This mib contains the managed objects for MPLS-TP lsp statistics.
Main OID:
sleMplsTpTunnelStats.1.3.6.1.4.1.6296.101.16.20
23
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
23 total| Object Name |
|---|
sleMpls OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.16 |
sleMplsTpTunnelStatsThis mib contains the managed objects for MPLS-TP lsp statistics. MODULE-IDENTITY .1.3.6.1.4.1.6296.101.16.20 |
sleMplsTpTunnelStatsTable OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.16.20.1 |
sleMplsTpTunnelStatsInfoTableThis table contains the information about the statistics of LSP which exist on the LSR or LER. SEQUENCE OF SleMplsTpTunnelStatsInfoEntry .1.3.6.1.4.1.6296.101.16.20.1.1 |
sleMplsTpTunnelStatsInfoEntryAn entry in this table represents the statistics of LSP. The LSP can be creates by network administator or SNMP agent as instruct by the MPLS-TP SleMplsTpTunnelStatsInfoEntry .1.3.6.1.4.1.6296.101.16.20.1.1.1 |
sleMplsTpTunnelStatsInfoIndexUniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading mplsTunnelIndexN. When the MPLS signalling protocol is rsvp(2) this value SHOULD be equal to the value signaled in the Tunnel Id of the Session object. When the MPLS signalling protocol is crldp(3) this value SHOULD be equal to the value signaled in the LSP ID. Unsigned32 .1.3.6.1.4.1.6296.101.16.20.1.1.1.1 |
sleMplsTpTunnelStatsInfoTunnelNameThe tunnel name of the LSP.ro OCTET STRING .1.3.6.1.4.1.6296.101.16.20.1.1.1.2 |
sleMplsTpTunnelStatsInfoRoleThis value signifies the role that this tunnel entry/instance represents. This value MUST be set to head(1) at the originating point of the tunnel. This value MUST be set to transit(2) at transit points along the tunnel, if transit points are supported. This value MUST be set to tail(3) at the terminating point of the tunnel if tunnel tails are supported. The value headTail(4) is provided for tunnels that begin and end on the same LSR.ro Enumeration .1.3.6.1.4.1.6296.101.16.20.1.1.1.3 |
sleMplsTpTunnelStatsInfoFwdTxPktsThe number of packet sent through the LSP.ro Counter64 .1.3.6.1.4.1.6296.101.16.20.1.1.1.4 |
sleMplsTpTunnelStatsInfoFwdTxBytesThe total bytes sent through the LSP.ro Counter64 .1.3.6.1.4.1.6296.101.16.20.1.1.1.5 |
sleMplsTpTunnelStatsInfoFwdRxPktsThe number of packet recieved through the LSP.ro Counter64 .1.3.6.1.4.1.6296.101.16.20.1.1.1.6 |
sleMplsTpTunnelStatsInfoFwdRxBytesThe total bytes recieved through the LSP.ro Counter64 .1.3.6.1.4.1.6296.101.16.20.1.1.1.7 |
sleMplsTpTunnelStatsInfoRevTxPktsThe number of packet sent through the LSP.ro Counter64 .1.3.6.1.4.1.6296.101.16.20.1.1.1.8 |
sleMplsTpTunnelStatsInfoRevTxBytesThe total bytes sent through the LSP.ro Counter64 .1.3.6.1.4.1.6296.101.16.20.1.1.1.9 |
sleMplsTpTunnelStatsInfoRevRxPktsThe number of packet recieved through the LSP.ro Counter64 .1.3.6.1.4.1.6296.101.16.20.1.1.1.10 |
sleMplsTpTunnelStatsInfoRevRxBytesThe total bytes recieved through the LSP.ro Counter64 .1.3.6.1.4.1.6296.101.16.20.1.1.1.11 |
sleMplsTpTunnelStatsControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.16.20.1.2 |
sleMplsTpTunnelStatsControlRequestThis object holds the possible read-write columns that can be modified in the Vrf table. For each read-write column of Vrf table, a Set Operation control value is added in this object.rw Enumeration .1.3.6.1.4.1.6296.101.16.20.1.2.1 |
sleMplsTpTunnelStatsControlStatusThis object displays the status of the configuration done.ro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.101.16.20.1.2.2 |
sleMplsTpTunnelStatsControlTimerThis object is based on the SLE style where a timer is configured for every control table.rw Gauge32 .1.3.6.1.4.1.6296.101.16.20.1.2.3 |
sleMplsTpTunnelStatsControlTimeStampThis object specifies the time at which the configuration is done.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.101.16.20.1.2.4 |
sleMplsTpTunnelStatsReqResultThe standard result of the SET operation is stored here.ro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.101.16.20.1.2.5 |
sleMplsTpTunnelStatsControlNameThe tunnel name of the LSP. To clear all the tunnel statistics, give the name as 'all'. To clear the specific tunnel, give the specific tunnel name.rw OCTET STRING .1.3.6.1.4.1.6296.101.16.20.1.2.6 |