SLE-MPLS-TP-PW-STATISTICS-MIB
AI MIB Summary
The SLE-MPLS-TP-PW-STATISTICS-MIB enables monitoring of Point-to-Point (P2P) and Point-to-Multipoint (P2MP) pseudowire traffic counters, including packet and byte volumes, on Provider Edge (PE) routers within an MPLS Transport Profile (MPLS-TP) network. This module specifically tracks operational statistics from pseudowire instantiation to facilitate performance analysis and fault detection on SLE vendor equipment.
This mib contains the managed objects for PW statistics. It shows the statistics of the PW from it created. Will display only on the PE.
Main OID:
sleMplsTpPwStats.1.3.6.1.4.1.6296.101.16.21
18
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
18 total| Object Name |
|---|
sleMpls OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.16 |
sleMplsTpPwStatsThis mib contains the managed objects for PW statistics. It shows the statistics of the PW from it created. Will display only on the PE. MODULE-IDENTITY .1.3.6.1.4.1.6296.101.16.21 |
sleMplsTpPwStatsTable OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.16.21.1 |
sleMplsTpPwStatsInfoTableThis table contains information about the PW statistics. SEQUENCE OF SleMplsTpPwStatsInfoEntry .1.3.6.1.4.1.6296.101.16.21.1.1 |
sleMplsTpPwStatsInfoEntryAn entry in this table represents the statistics of PW. The PW created by network administator or SNMP agent as instructed by the MPLS. SleMplsTpPwStatsInfoEntry .1.3.6.1.4.1.6296.101.16.21.1.1.1 |
sleMplsTpPwStatsInfoPwIdPw ID. PwIDType .1.3.6.1.4.1.6296.101.16.21.1.1.1.1 |
sleMplsTpPwStatsInfoPwNameThis object is displaying PW NAME.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.6296.101.16.21.1.1.1.2 |
sleMplsTpPwStatsInfoTxPktsTransmitted packet count.ro Counter64 .1.3.6.1.4.1.6296.101.16.21.1.1.1.3 |
sleMplsTpPwStatsInfoRxPktsReceived packet count.ro Counter64 .1.3.6.1.4.1.6296.101.16.21.1.1.1.4 |
sleMplsTpPwStatsInfoTxBytesTransmitted bytes count.ro Counter64 .1.3.6.1.4.1.6296.101.16.21.1.1.1.5 |
sleMplsTpPwStatsInfoRxBytesReceived bytes countro Counter64 .1.3.6.1.4.1.6296.101.16.21.1.1.1.6 |
sleMplsTpPwStatsControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.16.21.1.2 |
sleMplsTpPwStatsControlRequestThis object holds the possible read-write columns that can be modified in the Vrf table. For each read-write column of Vrf table, a Set Operation control value is added in this object.rw Enumeration .1.3.6.1.4.1.6296.101.16.21.1.2.1 |
sleMplsTpPwStatsControlStatusThis object displays the status of the configuration done.ro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.101.16.21.1.2.2 |
sleMplsTpPwStatsControlTimerThis object is based on the SLE style where a timer is configured for every control table.rw Gauge32 .1.3.6.1.4.1.6296.101.16.21.1.2.3 |
sleMplsTpPwStatsControlTimeStampThis object specifies the time at which the configuration is done.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.101.16.21.1.2.4 |
sleMplsTpPwStatsReqResultThe standard result of the SET operation is stored here.ro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.101.16.21.1.2.5 |
sleMplsTpPwStatsControlPwIdPW index. Index zero to clear all the VPWS statistics. Greater than zero to clear the specific VPWS statistics.rw Unsigned32 .1.3.6.1.4.1.6296.101.16.21.1.2.6 |