SLE-ISIS-MIB
This MIB contains information about RIP version 2.
Main OID:
sleISIS.1.3.6.1.4.1.6296.101.56
357
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
357 total| Object Name |
|---|
sleISISThis MIB contains information about RIP version 2. MODULE-IDENTITY .1.3.6.1.4.1.6296.101.56 |
sleISISBase OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.1 |
sleISISBaseInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.1.1 |
sleISISRestartSuppressAdjacencyISIS restart suppress-adjacencyrw Enumeration .1.3.6.1.4.1.6296.101.56.1.1.1 |
sleISISRestartHelperISIS restart helperrw Enumeration .1.3.6.1.4.1.6296.101.56.1.1.2 |
sleISISRestartGracePeriodISIS Graceful-restart period. Seconds: <1-65535> Specify the number of seconds in the grace period.ro INTEGER .1.3.6.1.4.1.6296.101.56.1.1.3 |
sleISISBaseControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.1.2 |
sleISISControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.101.56.1.2.1 |
sleISISControlStatusThe request of a user commandro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.101.56.1.2.2 |
sleISISControlTimerThe maximum time for the manager for a long running user commandrw Gauge32 .1.3.6.1.4.1.6296.101.56.1.2.3 |
sleISISControlTimeStampThe time stamp of the last command(end of command)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.101.56.1.2.4 |
sleISISControlReqResultThe result of the last user commandro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.101.56.1.2.5 |
sleISISControlRestartSuppressAdjacencyDescription.rw Enumeration .1.3.6.1.4.1.6296.101.56.1.2.6 |
sleISISControlRestartHelperDescription.rw Enumeration .1.3.6.1.4.1.6296.101.56.1.2.7 |
sleISISControlRestartPeriodISIS Graceful-restart period.rw Integer32 .1.3.6.1.4.1.6296.101.56.1.2.8 |
sleISISControlClearSystemIdSystem-ID Neighbor system ID in XXXX. XXXX. XXXX format.rw OCTET STRING .1.3.6.1.4.1.6296.101.56.1.2.9 |
sleISISControlClearIfNameInterface Name of ISIS for clearrw OCTET STRING .1.3.6.1.4.1.6296.101.56.1.2.10 |
sleISISControlClearRouteTagRouting area tagrw OCTET STRING .1.3.6.1.4.1.6296.101.56.1.2.11 |
sleISISControlClearRouteModeThe route mode to clear. Redistribution: Clear ISIS local redistribution routes. all: Clear all of the ISIS routing table.srw Enumeration .1.3.6.1.4.1.6296.101.56.1.2.12 |
sleISISBaseNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.1.3 |
sleISISProc OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.2 |
sleISISProcInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.2.1 |
sleISISProcInfoTableDescription. SEQUENCE OF SleISISProcInfoEntry .1.3.6.1.4.1.6296.101.56.2.1.1 |
sleISISProcInfoEntryDescription. SleISISProcInfoEntry .1.3.6.1.4.1.6296.101.56.2.1.1.1 |
sleISISProcInfoInstanceIDInstance ID of ISIS Processro Integer32 .1.3.6.1.4.1.6296.101.56.2.1.1.1.1 |
sleISISProcInfoTagISIS Process Tagro OCTET STRING .1.3.6.1.4.1.6296.101.56.2.1.1.1.2 |
sleISISProcBfdAllInterfaceEnable BFD on all interfacesro Enumeration .1.3.6.1.4.1.6296.101.56.2.1.1.1.3 |
sleISISProcCapCspfEnable Constrained Shortest Path Firstro Enumeration .1.3.6.1.4.1.6296.101.56.2.1.1.1.4 |
sleISISProcDynHostnameEnable dynamic hostnamero Enumeration .1.3.6.1.4.1.6296.101.56.2.1.1.1.5 |
sleISISProcDynHostnameAreaTagUse area-tag as hostnamero Enumeration .1.3.6.1.4.1.6296.101.56.2.1.1.1.6 |
sleISISProcIgnLspErrIgnore LSPs with bad checksumsro Enumeration .1.3.6.1.4.1.6296.101.56.2.1.1.1.7 |
sleISISProcRouteHighPriorityTagSets the high priority of routero Gauge32 .1.3.6.1.4.1.6296.101.56.2.1.1.1.8 |
sleISISProcIspfLevelEnable incremental SPF for ISIS procesro Enumeration .1.3.6.1.4.1.6296.101.56.2.1.1.1.9 |
sleISISProcIsTypeLevelIS Level for ISIS processro Enumeration .1.3.6.1.4.1.6296.101.56.2.1.1.1.10 |
sleISISProcLspGenIntervalMinimum interval between regenerating same LSPro INTEGER .1.3.6.1.4.1.6296.101.56.2.1.1.1.11 |
sleISISProcLspGenIntervalLevelIS Level for ISIS processro Enumeration .1.3.6.1.4.1.6296.101.56.2.1.1.1.12 |
sleISISProcLspMtuSet lsp MTU in bytesro INTEGER .1.3.6.1.4.1.6296.101.56.2.1.1.1.13 |
sleISISProcLspMtuLevelIS Level for ISIS processro Enumeration .1.3.6.1.4.1.6296.101.56.2.1.1.1.14 |
sleISISProcLspRefreshIntervalSet LSP refresh intervalro INTEGER .1.3.6.1.4.1.6296.101.56.2.1.1.1.15 |
sleISISProcMaxAreaAddressNumConfigure isis maximum area addressro INTEGER .1.3.6.1.4.1.6296.101.56.2.1.1.1.16 |
sleISISProcMaxLspLifetimeSet maximum LSP lifetimero INTEGER .1.3.6.1.4.1.6296.101.56.2.1.1.1.17 |
sleISISProcMetricStyleUse old-style (ISO 10589) or new-style packet formatsro Enumeration .1.3.6.1.4.1.6296.101.56.2.1.1.1.18 |
sleISISProcMetricStyleLevelLevel of Metric Stylero Enumeration .1.3.6.1.4.1.6296.101.56.2.1.1.1.19 |
sleISISProcMplsTrafficEngLevelTraffice Engine level of MPLS routing protocolro Enumeration .1.3.6.1.4.1.6296.101.56.2.1.1.1.20 |
sleISISProcMplsTrafficEngRouterIDTraffice Engine Router ID of MPLS routing protocoro IpAddress .1.3.6.1.4.1.6296.101.56.2.1.1.1.21 |
sleISISProcPrcIntervalExpMinDelayUse exponential backoff min delays between PRC calculationro INTEGER .1.3.6.1.4.1.6296.101.56.2.1.1.1.22 |
sleISISProcPrcIntervalExpMaxDelayUse exponential backoff max delays between PRC calculationro INTEGER .1.3.6.1.4.1.6296.101.56.2.1.1.1.23 |
sleISISProcProtocolTopolgyProtocol Topologyro Enumeration .1.3.6.1.4.1.6296.101.56.2.1.1.1.24 |
sleISISProcRestartTimerValRestart timer intervalro INTEGER .1.3.6.1.4.1.6296.101.56.2.1.1.1.25 |
sleISISProcRestartTimerLevelRestart timer levelro Enumeration .1.3.6.1.4.1.6296.101.56.2.1.1.1.26 |
sleISISProcSpfIntervalExpMinUse exponential backoff min delays between SPF calculationsro INTEGER .1.3.6.1.4.1.6296.101.56.2.1.1.1.27 |
sleISISProcSpfIntervalExpMaxUse exponential backoff max delays between SPF calculationsro INTEGER .1.3.6.1.4.1.6296.101.56.2.1.1.1.28 |
sleISISProcSpfIntervalExpLevelLevel of SPF Interval Expro Enumeration .1.3.6.1.4.1.6296.101.56.2.1.1.1.29 |
sleISISProcAuthModeAuthentication mode of ISIS Processro Enumeration .1.3.6.1.4.1.6296.101.56.2.1.1.1.30 |
sleISISProcAuthModeLevelAuthentication level of ISIS Processro Enumeration .1.3.6.1.4.1.6296.101.56.2.1.1.1.31 |
sleISISProcAuthSendOnlyAuthentication send-onlyro Enumeration .1.3.6.1.4.1.6296.101.56.2.1.1.1.32 |
sleISISProcAuthSendOnlyLevelLevel of Authentication send-onlyro Enumeration .1.3.6.1.4.1.6296.101.56.2.1.1.1.33 |
sleISISProcDomPassValISIS Routing domain passwordro OCTET STRING .1.3.6.1.4.1.6296.101.56.2.1.1.1.34 |
sleISISProcDomPassAuthSnpSNP Authentication of ISIS Routing domainro Enumeration .1.3.6.1.4.1.6296.101.56.2.1.1.1.35 |
sleISISProcAreaPassValISIS Routing Area passwordro OCTET STRING .1.3.6.1.4.1.6296.101.56.2.1.1.1.36 |
sleISISProcAreaPassAuthSnpSNP Authentication of ISIS Routing Arearo Enumeration .1.3.6.1.4.1.6296.101.56.2.1.1.1.37 |
sleISISProcSetOverloadBitSignal other routers not to use us in SPFro Enumeration .1.3.6.1.4.1.6296.101.56.2.1.1.1.38 |
sleISISProcSetOverloadBitOnStartupSet overload-bit only temporarily after rebootro Enumeration .1.3.6.1.4.1.6296.101.56.2.1.1.1.39 |
sleISISProcSetOverloadBitOnStartupIntervalTime in seconds to advertise ourself as overloaded after rebootro Integer32 .1.3.6.1.4.1.6296.101.56.2.1.1.1.40 |
sleISISProcSetOverloadBitSuppressIf overload-bit set, suppress the following types of IP prefixesro Enumeration .1.3.6.1.4.1.6296.101.56.2.1.1.1.41 |
sleISISProcWaitTimerValSet lsp MTU in bytesro INTEGER .1.3.6.1.4.1.6296.101.56.2.1.1.1.42 |
sleISISProcWaitTimerLevelIS Level for ISIS processro Enumeration .1.3.6.1.4.1.6296.101.56.2.1.1.1.43 |
sleISISProcAuthenKeyChainL1The authentication key-chain with level1ro OCTET STRING .1.3.6.1.4.1.6296.101.56.2.1.1.1.44 |
sleISISProcAuthenKeyChainL2The authentication key-chain with level2.ro OCTET STRING .1.3.6.1.4.1.6296.101.56.2.1.1.1.45 |
sleISISProcAuthenKeyChainL1L2The authentication key-chain with level1 and level2.ro OCTET STRING .1.3.6.1.4.1.6296.101.56.2.1.1.1.46 |
sleISISProcInfoControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.2.1.2 |
sleISISProcInfoControlRequestDescription.rw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.1 |
sleISISProcInfoControlStatusDescription.ro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.101.56.2.1.2.2 |
sleISISProcInfoControlTimerDescription.rw Gauge32 .1.3.6.1.4.1.6296.101.56.2.1.2.3 |
sleISISProcInfoControlTimeStampDescription.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.101.56.2.1.2.4 |
sleISISProcInfoControlReqResultDescription.ro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.101.56.2.1.2.5 |
sleISISProcInfoControlTagISIS Process Tagrw OCTET STRING .1.3.6.1.4.1.6296.101.56.2.1.2.6 |
sleISISProcInfoControlBfdAllInterfaceEnable BFD on all interfacesrw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.7 |
sleISISProcInfoControlCapCspfEnable Constrained Shortest Path Firstrw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.8 |
sleISISProcInfoControlDynHostnameEnable dynamic hostnamerw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.9 |
sleISISProcInfoControlDynHostnameAreaTagUse area-tag as hostnamerw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.10 |
sleISISProcInfoControlIgnLspErrIgnore LSPs with bad checksumsrw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.11 |
sleISISProcInfoControlRouteHighPriorityTagSets the high priority of routerw Gauge32 .1.3.6.1.4.1.6296.101.56.2.1.2.12 |
sleISISProcInfoControlIspfLevelEnable incremental SPF for ISIS procesrw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.13 |
sleISISProcInfoControlIsTypeLevelIS Level for ISISprocessrw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.14 |
sleISISProcInfoControlLspGenIntervalMinimum interval between regenerating same LSPrw INTEGER .1.3.6.1.4.1.6296.101.56.2.1.2.15 |
sleISISProcInfoControlLspGenIntervalLevelIS Level for ISISprocessrw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.16 |
sleISISProcInfoControlLspMtuSet lsp MTU in bytesrw INTEGER .1.3.6.1.4.1.6296.101.56.2.1.2.17 |
sleISISProcInfoControlLspMtuLevelIS Level for ISISprocessrw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.18 |
sleISISProcInfoControlLspRefreshIntervalSet LSP refresh intervalrw INTEGER .1.3.6.1.4.1.6296.101.56.2.1.2.19 |
sleISISProcInfoControlMaxAreaAddressNumConfigure isis maximum area addressrw INTEGER .1.3.6.1.4.1.6296.101.56.2.1.2.20 |
sleISISProcInfoControlMaxLspLifetimeSet maximum LSP lifetimerw INTEGER .1.3.6.1.4.1.6296.101.56.2.1.2.21 |
sleISISProcInfoControlMetricStyleUse old-style (ISO 10589) or new-style packet formatsrw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.22 |
sleISISProcInfoControlMetricStyleLevelLevel of Metric Stylerw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.23 |
sleISISProcInfoControlMplsTrafficEngLevelTraffice Engine level of MPLS routing protocolrw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.24 |
sleISISProcInfoControlMplsTrafficEngRouterIDTraffice Engine Router ID of MPLS routing protocolrw IpAddress .1.3.6.1.4.1.6296.101.56.2.1.2.25 |
sleISISProcInfoControlPrcIntervalExpMinDelayUse exponential backoff min delays between PRC calculationrw INTEGER .1.3.6.1.4.1.6296.101.56.2.1.2.26 |
sleISISProcInfoControlPrcIntervalExpMaxDelayUse exponential backoff max delays between PRC calculationrw INTEGER .1.3.6.1.4.1.6296.101.56.2.1.2.27 |
sleISISProcInfoControlProtocolTopolgyProtocol Topologyrw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.28 |
sleISISProcInfoControlRestartTimerValProtocol Topologyrw INTEGER .1.3.6.1.4.1.6296.101.56.2.1.2.29 |
sleISISProcInfoControlRestartTimerLevelRestart timer levelrw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.30 |
sleISISProcInfoControlSpfIntervalExpMinUse exponential backoff min delays between SPF calculationsrw INTEGER .1.3.6.1.4.1.6296.101.56.2.1.2.31 |
sleISISProcInfoControlSpfIntervalExpMaxUse exponential backoff max delays between SPF calculationsrw INTEGER .1.3.6.1.4.1.6296.101.56.2.1.2.32 |
sleISISProcInfoControlSpfIntervalExpLevelLevel of SPF Interval Exprw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.33 |
sleISISProcInfoControlAuthModeAuthentication mode of ISIS Processrw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.34 |
sleISISProcInfoControlAuthModeLevelAuthentication level of ISIS Processrw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.35 |
sleISISProcInfoControlAuthSendOnlyAuthentication send-onlyrw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.36 |
sleISISProcInfoControlAuthSendOnlyLevelLevel of Authentication send-onlyrw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.37 |
sleISISProcInfoControlDomPassValISIS Routing domain passwordrw OCTET STRING .1.3.6.1.4.1.6296.101.56.2.1.2.38 |
sleISISProcInfoControlDomPassAuthSnpSNP Authentication of ISIS Routing domainrw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.39 |
sleISISProcInfoControlAreaPassValISIS Routing Area passwordrw OCTET STRING .1.3.6.1.4.1.6296.101.56.2.1.2.40 |
sleISISProcInfoControlAreaPassAuthSnpSNP Authentication of ISIS Routing domainrw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.41 |
sleISISProcInfoControlSetOverloadBitSignal other routers not to use us in SPFrw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.42 |
sleISISProcInfoControlSetOverloadBitOnStartupSet overload-bit only temporarily after rebootrw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.43 |
sleISISProcInfoControlSetOverloadBitOnStartupIntervalTime in seconds to advertise ourself as overloaded after rebootrw INTEGER .1.3.6.1.4.1.6296.101.56.2.1.2.44 |
sleISISProcInfoControlSetOverloadBitSuppressIf overload-bit set, suppress the following types of IP prefixesrw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.45 |
sleISISProcControlWaitTimerValSet lsp MTU in bytesrw INTEGER .1.3.6.1.4.1.6296.101.56.2.1.2.46 |
sleISISProcControlWaitTimerLevelEnable incremental SPF for ISIS procesrw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.47 |
sleISISProcControlAuthenkeyChainThe authentication key-chain word.rw OCTET STRING .1.3.6.1.4.1.6296.101.56.2.1.2.48 |
sleISISProcControlAuthenkeyChainLevelThe authentication key-chain level.rw Enumeration .1.3.6.1.4.1.6296.101.56.2.1.2.49 |
sleISISProcInfoNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.2.1.3 |
sleISISProcNet OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.2.2 |
sleISISProcNetTableDescription. SEQUENCE OF SleISISProcNetEntry .1.3.6.1.4.1.6296.101.56.2.2.1 |
sleISISProcNetEntryDescription. SleISISProcNetEntry .1.3.6.1.4.1.6296.101.56.2.2.1.1 |
sleISISProcNetInstanceIDDescription.ro Integer32 .1.3.6.1.4.1.6296.101.56.2.2.1.1.1 |
sleISISProcNetTitleDescription.ro OCTET STRING .1.3.6.1.4.1.6296.101.56.2.2.1.1.2 |
sleISISProcNetControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.2.2.2 |
sleISISProcNetControlRequestDescription.rw Enumeration .1.3.6.1.4.1.6296.101.56.2.2.2.1 |
sleISISProcNetControlStatusDescription.ro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.101.56.2.2.2.2 |
sleISISProcNetControlTimerDescription.rw Gauge32 .1.3.6.1.4.1.6296.101.56.2.2.2.3 |
sleISISProcNetControlTimeStampDescription.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.101.56.2.2.2.4 |
sleISISProcNetControlReqResultDescription.ro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.101.56.2.2.2.5 |
sleISISProcNetControlInstanceIDDescription.rw Integer32 .1.3.6.1.4.1.6296.101.56.2.2.2.6 |
sleISISProcNetControlTitleDescription.rw OCTET STRING .1.3.6.1.4.1.6296.101.56.2.2.2.7 |
sleISISProcNetNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.2.2.3 |
sleISISProcDistanceV4 OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.2.3 |
sleISISProcDistanceV4TableDescription. SEQUENCE OF SleISISProcDistanceV4Entry .1.3.6.1.4.1.6296.101.56.2.3.1 |
sleISISProcDistanceV4EntryDescription. SleISISProcDistanceV4Entry .1.3.6.1.4.1.6296.101.56.2.3.1.1 |
sleISISProcDistanceV4InstanceIDISIS Instance IDro Integer32 .1.3.6.1.4.1.6296.101.56.2.3.1.1.1 |
sleISISProcDistanceV4DistISIS Administrative Distance rangero Integer32 .1.3.6.1.4.1.6296.101.56.2.3.1.1.2 |
sleISISProcDistanceV4SytemIDSource ID in XXXX.XXXX.XXXX format.ro OCTET STRING .1.3.6.1.4.1.6296.101.56.2.3.1.1.3 |
sleISISProcDistanceV4AccessListAccess-list name.ro OCTET STRING .1.3.6.1.4.1.6296.101.56.2.3.1.1.4 |
sleISISProcDistanceV4Control OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.2.3.2 |
sleISISProcDistanceV4ControlRequestDescription.rw Enumeration .1.3.6.1.4.1.6296.101.56.2.3.2.1 |
sleISISProcDistanceV4ControlStatusDescription.ro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.101.56.2.3.2.2 |
sleISISProcDistanceV4ControlTimerDescription.rw Gauge32 .1.3.6.1.4.1.6296.101.56.2.3.2.3 |
sleISISProcDistanceV4TimeStampDescription.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.101.56.2.3.2.4 |
sleISISProcDistanceV4ntrolReqResultDescription.ro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.101.56.2.3.2.5 |
sleISISProcDistanceV4ControlInstanceIDSet the ISIS Instance IDro Integer32 .1.3.6.1.4.1.6296.101.56.2.3.2.6 |
sleISISProcDistanceV4ControlDistISIS Administrative Distance rangero Integer32 .1.3.6.1.4.1.6296.101.56.2.3.2.7 |
sleISISProcDistanceV4ControlSytemIDSource ID in XXXX.XXXX.XXXX format.ro OCTET STRING .1.3.6.1.4.1.6296.101.56.2.3.2.8 |
sleISISProcDistanceV4ControlAccessListAccess-list name.ro OCTET STRING .1.3.6.1.4.1.6296.101.56.2.3.2.9 |
sleISISProcDistanceV4Notification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.2.3.3 |
sleISISIf OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.3 |
slsISISIfTableDescription. SEQUENCE OF SlsISISIfEntry .1.3.6.1.4.1.6296.101.56.3.1 |
slsISISIfEntryDescription. SlsISISIfEntry .1.3.6.1.4.1.6296.101.56.3.1.1 |
sleISISIfIndexvlan interface index for isis protocol.ro Integer32 .1.3.6.1.4.1.6296.101.56.3.1.1.1 |
sleISISIfMplsLdpIgpSyncUse this command to enable LDP-ISIS synchronization. 0 : diaable 1 : level-1 2 : level-1-2,(default) 3 : level-2ro Enumeration .1.3.6.1.4.1.6296.101.56.3.1.1.2 |
sleISISIfIpRouterUse this command to enable ISIS IPv4 routing on the interface. 1 : enable 0 : disablero Enumeration .1.3.6.1.4.1.6296.101.56.3.1.1.3 |
sleISISIfAuthSendLevel1Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disablero Enumeration .1.3.6.1.4.1.6296.101.56.3.1.1.4 |
sleISISIfAuthSendLevel2Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disablero Enumeration .1.3.6.1.4.1.6296.101.56.3.1.1.5 |
sleISISIfAuthModeMd5Levle1Use this command to set the MD5 authentication mode. 1 : enable 0 : disablero Enumeration .1.3.6.1.4.1.6296.101.56.3.1.1.6 |
sleISISIfAuthModeMd5Levle2Use this command to set the MD5 authentication mode. 1 : enable 0 : disablero Enumeration .1.3.6.1.4.1.6296.101.56.3.1.1.7 |
sleISISIfAuthModeTextLevle1Use this command to set the MD5 authentication mode. 1 : enable 0 : disablero Enumeration .1.3.6.1.4.1.6296.101.56.3.1.1.8 |
sleISISIfAuthModeTextLevle2Use this command to set the MD5 authentication mode. 1 : enable 0 : disablero Enumeration .1.3.6.1.4.1.6296.101.56.3.1.1.9 |
sleISISIfAuthKeyChainLevle1Use this command to set the key chain to be used for authentication on the interface-related packets. disable : null stringro OCTET STRING .1.3.6.1.4.1.6296.101.56.3.1.1.10 |
sleISISIfAuthKeyChainLevle2Use this command to set the key chain to be used for authentication on the interface-related packets. disable : null stringro OCTET STRING .1.3.6.1.4.1.6296.101.56.3.1.1.11 |
sleISISIfBfdUse this command to enable/disable the BFD check on interface. 1 : enable 0 : disablero Enumeration .1.3.6.1.4.1.6296.101.56.3.1.1.12 |
sleISISIfBfdDisableUse this command to enable/disable the BFD check on interface. 1 : enable 0 : disablero Enumeration .1.3.6.1.4.1.6296.101.56.3.1.1.13 |
sleISISIfCircuitTypeUse this command to set the circuit type for the interface. 1 : level-1 2 : level-1-2,(default) 3 : level-2ro Enumeration .1.3.6.1.4.1.6296.101.56.3.1.1.14 |
sleISISIfCsnpIntervalLevel1Use this command to set CSNP (Complete sequence number PDU) interval in seconds. range : 1 - 65535 default : 10ro Integer32 .1.3.6.1.4.1.6296.101.56.3.1.1.15 |
sleISISIfCsnpIntervalLevel2Use this command to set CSNP (Complete sequence number PDU) interval in seconds. range : 1 - 65535 default : 10ro Integer32 .1.3.6.1.4.1.6296.101.56.3.1.1.16 |
sleISISIfHelloPaddingUse this command to configure the padding of the ISIS Hello packet. 1 : enable 0 : disablero Enumeration .1.3.6.1.4.1.6296.101.56.3.1.1.17 |
sleISISIfHelloIntervalLevel1Use this command to set the Hello interval in seconds. range : 1 - 65535 default : 10ro Integer32 .1.3.6.1.4.1.6296.101.56.3.1.1.18 |
sleISISIfHelloIntervalLevel2Use this command to set the Hello interval in seconds. range : 1 - 65535 default : 10ro Integer32 .1.3.6.1.4.1.6296.101.56.3.1.1.19 |
sleISISIfHelloIntervalMinimalLevel1Use this command to set the Hello interval in seconds. 1 : enable 0 : disablero Enumeration .1.3.6.1.4.1.6296.101.56.3.1.1.20 |
sleISISIfHelloIntervalMinimalLevel2Use this command to set the Hello interval in seconds. 1 : enable 0 : disablero Enumeration .1.3.6.1.4.1.6296.101.56.3.1.1.21 |
sleISISIfHelloMultiplierLevel1Use this command to set multiplier for Hello holding time. range : 2 - 10 default : 3ro Integer32 .1.3.6.1.4.1.6296.101.56.3.1.1.22 |
sleISISIfHelloMultiplierLevel2Use this command to set multiplier for Hello holding time. range : 2 - 10 default : 3ro Integer32 .1.3.6.1.4.1.6296.101.56.3.1.1.23 |
sleISISIfLspIntervalUse this command to set the Link State Packet (LSP) transmission interval. range : 1 - 4294967295 default : 33ro Unsigned32 .1.3.6.1.4.1.6296.101.56.3.1.1.24 |
sleISISIfMeshGroupUse this command to set Mesh Group ID on the current interface. range : 1 - 4294967295 disable : 0ro Unsigned32 .1.3.6.1.4.1.6296.101.56.3.1.1.25 |
sleISISIfMetricLevel1Use this command to set default metric for the interface. range : 1 - 63 default : 10ro Integer32 .1.3.6.1.4.1.6296.101.56.3.1.1.26 |
sleISISIfMetricLevel2Use this command to set default metric for the interface. range : 1 - 63 default : 10ro Integer32 .1.3.6.1.4.1.6296.101.56.3.1.1.27 |
sleISISIfNetworkUse this command to change a broadcast interface network type to a point-to-point network type. 0 : disable 1 : broadcast 2 : point-to-pointro Enumeration .1.3.6.1.4.1.6296.101.56.3.1.1.28 |
sleISISIfPriorityLevel1Use this command to set the priority for LAN DIS election. range : 0 - 127 default : 64ro Integer32 .1.3.6.1.4.1.6296.101.56.3.1.1.29 |
sleISISIfPriorityLevel2Use this command to set the priority for LAN DIS election. range : 0 - 127 default : 64ro Integer32 .1.3.6.1.4.1.6296.101.56.3.1.1.30 |
sleISISIfRestartHelloIntervalLevel1Use this command to configure the T1 timer, interval of ISIS Hello packet with restart TLV. range : 1 - 65535 default : 3ro Integer32 .1.3.6.1.4.1.6296.101.56.3.1.1.31 |
sleISISIfRestartHelloIntervalLevel2Use this command to configure the T1 timer, interval of ISIS Hello packet with restart TLV. range : 1 - 65535 default : 3ro Integer32 .1.3.6.1.4.1.6296.101.56.3.1.1.32 |
sleISISIfRetransmitIntervalUse this command to set LSP retransmission interval. range : 0 - 65535 default : 5ro Integer32 .1.3.6.1.4.1.6296.101.56.3.1.1.33 |
sleISISIfWideMetricLevel1Use this command to set wide metric for the interface. range : 1 - 16777214 default : 10ro Integer32 .1.3.6.1.4.1.6296.101.56.3.1.1.34 |
sleISISIfWideMetricLevel2Use this command to set wide metric for the interface. range : 1 - 16777214 default : 10rw Integer32 .1.3.6.1.4.1.6296.101.56.3.1.1.35 |
sleISISIfControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.3.2 |
sleISISIfControlRequestDescription.rw SleControlRequestResultType { setISISIfProfile(1) } .1.3.6.1.4.1.6296.101.56.3.2.1 |
sleISISIfControlStatusDescription.rw SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.101.56.3.2.2 |
sleISISIfControlTimerDescription.rw Gauge32 .1.3.6.1.4.1.6296.101.56.3.2.3 |
sleISISIfControlTimeStampDescription.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.101.56.3.2.4 |
sleISISIfControlReqResultDescription.rw SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.101.56.3.2.5 |
sleISISIfControlIndexvlan interface index for isis protocol.rw Integer32 .1.3.6.1.4.1.6296.101.56.3.2.6 |
sleISISIfControlMplsLdpIgpSyncUse this command to enable LDP-ISIS synchronization. 0 : diaable 1 : level-1 2 : level-1-2,(default) 3 : level-2rw Enumeration .1.3.6.1.4.1.6296.101.56.3.2.7 |
sleISISIfControlIpRouterUse this command to enable ISIS IPv4 routing on the interface. 1 : enable 0 : disablerw Enumeration .1.3.6.1.4.1.6296.101.56.3.2.8 |
sleISISIfControlAuthSendLevel1Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disablerw Enumeration .1.3.6.1.4.1.6296.101.56.3.2.9 |
sleISISIfControlAuthSendLevel2Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disablerw Enumeration .1.3.6.1.4.1.6296.101.56.3.2.10 |
sleISISIfControlAuthModeMd5Levle1Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disablerw Enumeration .1.3.6.1.4.1.6296.101.56.3.2.11 |
sleISISIfControlAuthModeMd5Levle2Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disablerw Enumeration .1.3.6.1.4.1.6296.101.56.3.2.12 |
sleISISIfControlAuthModeTextLevle1Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disablerw Enumeration .1.3.6.1.4.1.6296.101.56.3.2.13 |
sleISISIfControlAuthModeTextLevle2Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disablerw Enumeration .1.3.6.1.4.1.6296.101.56.3.2.14 |
sleISISIfControlAuthKeyChainLevle1Use this command to set the key chain to be used for authentication on the interface-related packets. disable : null stringrw OCTET STRING .1.3.6.1.4.1.6296.101.56.3.2.15 |
sleISISIfControlAuthKeyChainLevle2Use this command to set the key chain to be used for authentication on the interface-related packets. disable : null stringrw OCTET STRING .1.3.6.1.4.1.6296.101.56.3.2.16 |
sleISISIfControlBfdUse this command to enable/disable the BFD check on interface. 1 : enable 0 : disablerw Enumeration .1.3.6.1.4.1.6296.101.56.3.2.17 |
sleISISIfControlBfdDisableUse this command to enable/disable the BFD check on interface. 1 : enable 0 : disablerw Enumeration .1.3.6.1.4.1.6296.101.56.3.2.18 |
sleISISIfControlCircuitTypeUse this command to set the circuit type for the interface. 1 : level-1 2 : level-1-2,(default) 3 : level-2rw Enumeration .1.3.6.1.4.1.6296.101.56.3.2.19 |
sleISISIfControlCsnpIntervalLevel1Use this command to set CSNP (Complete sequence number PDU) interval in seconds. range : 1 ? 65535 default : 10rw Integer32 .1.3.6.1.4.1.6296.101.56.3.2.20 |
sleISISIfControlCsnpIntervalLevel2Use this command to set CSNP (Complete sequence number PDU) interval in seconds. range : 1 ? 65535 default : 10rw Integer32 .1.3.6.1.4.1.6296.101.56.3.2.21 |
sleISISIfControlHelloPaddingUse this command to configure the padding of the ISIS Hello packet. 1 : enable 0 : disablerw Enumeration .1.3.6.1.4.1.6296.101.56.3.2.22 |
sleISISIfControlHelloIntervalLevel1Use this command to set the Hello interval in seconds. range : 1 ? 65535 default : 10rw Integer32 .1.3.6.1.4.1.6296.101.56.3.2.23 |
sleISISIfControlHelloIntervalLevel2Use this command to set the Hello interval in seconds. range : 1 ? 65535 default : 10rw Integer32 .1.3.6.1.4.1.6296.101.56.3.2.24 |
sleISISIfControlHelloIntervalMinimalLevel1Use this command to set the Hello interval in seconds. 1 : enable 0 : disablerw Enumeration .1.3.6.1.4.1.6296.101.56.3.2.25 |
sleISISIfControlHelloIntervalMinimalLevel2Use this command to set the Hello interval in seconds. 1 : enable 0 : disablerw Enumeration .1.3.6.1.4.1.6296.101.56.3.2.26 |
sleISISIfControlHelloMultiplierLevel1Use this command to set multiplier for Hello holding time. range : 2 ? 10 default : 3rw Integer32 .1.3.6.1.4.1.6296.101.56.3.2.27 |
sleISISIfControlHelloMultiplierLevel2Use this command to set multiplier for Hello holding time. range : 2 ? 10 default : 3rw Integer32 .1.3.6.1.4.1.6296.101.56.3.2.28 |
sleISISIfControlLspIntervalUse this command to set the Link State Packet (LSP) transmission interval. range : 1 ? 4294967295 default : 33rw Unsigned32 .1.3.6.1.4.1.6296.101.56.3.2.29 |
sleISISIfControlMeshGroupUse this command to set Mesh Group ID on the current interface. range : 1 ? 4294967295 disable : 0rw Unsigned32 (0 | 1..4294967295) .1.3.6.1.4.1.6296.101.56.3.2.30 |
sleISISIfControlMetricLevel1Use this command to set default metric for the interface. range : 1 ? 63 default : 10rw Integer32 .1.3.6.1.4.1.6296.101.56.3.2.31 |
sleISISIfControlMetricLevel2Use this command to set default metric for the interface. range : 1 ? 63 default : 10rw Integer32 .1.3.6.1.4.1.6296.101.56.3.2.32 |
sleISISIfControlNetworkUse this command to change a broadcast interface network type to a point-to-point network type. 0 : disable 1 : broadcast 2 : point-to-pointrw Enumeration .1.3.6.1.4.1.6296.101.56.3.2.33 |
sleISISIfControlPriorityLevel1Use this command to set the priority for LAN DIS election. range : 0 ? 127 default : 64rw Integer32 .1.3.6.1.4.1.6296.101.56.3.2.34 |
sleISISIfControlPriorityLevel2Use this command to set the priority for LAN DIS election. range : 0 ? 127 default : 64rw Integer32 .1.3.6.1.4.1.6296.101.56.3.2.35 |
sleISISIfControlRestartHelloIntervalLevel1Use this command to configure the T1 timer, interval of ISIS Hello packet with restart TLV. range : 1 ? 65535 default : 3rw Integer32 .1.3.6.1.4.1.6296.101.56.3.2.36 |
sleISISIfControlRestartHelloIntervalLevel2Use this command to configure the T1 timer, interval of ISIS Hello packet with restart TLV. range : 1 ? 65535 default : 3rw Integer32 .1.3.6.1.4.1.6296.101.56.3.2.37 |
sleISISIfControlRetransmitIntervalUse this command to set LSP retransmission interval. range : 0 ? 65535 default : 5rw Integer32 .1.3.6.1.4.1.6296.101.56.3.2.38 |
sleISISIfControlWideMetricLevel1Use this command to set wide metric for the interface. range : 1 - 16777214 default : 10rw Integer32 .1.3.6.1.4.1.6296.101.56.3.2.39 |
sleISISIfControlWideMetricLevel2Use this command to set wide metric for the interface. range : 1 - 16777214 default : 10rw Integer32 .1.3.6.1.4.1.6296.101.56.3.2.40 |
slsISISNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.3.3 |
sleISISIfStatusTableDescription. SEQUENCE OF SleISISIfStatusEntry .1.3.6.1.4.1.6296.101.56.3.4 |
sleISISIfStatusEntryDescription. SleISISIfStatusEntry .1.3.6.1.4.1.6296.101.56.3.4.1 |
sleISISIfStatusIfIndexvlan interface index for isis protocol.ro Integer32 .1.3.6.1.4.1.6296.101.56.3.4.1.1 |
sleIsisIfStatusIfStatusThe interface up/down statusro Enumeration .1.3.6.1.4.1.6296.101.56.3.4.1.2 |
sleIsisIfStatusIsisTagThe ISIS tagro OCTET STRING .1.3.6.1.4.1.6296.101.56.3.4.1.3 |
sleIsisIfStatusNetworkTypeThe network typero Enumeration .1.3.6.1.4.1.6296.101.56.3.4.1.4 |
sleIsisIfStatusCircuitTypeThe circuit typero Enumeration .1.3.6.1.4.1.6296.101.56.3.4.1.5 |
sleIsisIfStatusLocalCircuitIdThe local circuit idro Integer32 .1.3.6.1.4.1.6296.101.56.3.4.1.6 |
sleIsisIfStatusExtendedLocalCircuitIdThe extended local circuit idro Integer32 .1.3.6.1.4.1.6296.101.56.3.4.1.7 |
sleIsisIfStatusLocalSnpaThe local SNPA mac addressro OCTET STRING .1.3.6.1.4.1.6296.101.56.3.4.1.8 |
sleIsisIfStatusLdpSyncHoldTimerThe LDP sync hold timer(sec)ro Integer32 .1.3.6.1.4.1.6296.101.56.3.4.1.9 |
sleIsisIfStatusLdpSyncRemainingTimeThe LDP sync remaining time(sec)ro Integer32 .1.3.6.1.4.1.6296.101.56.3.4.1.10 |
sleIsisIfStatusCircuitL1MetricThe narrow metric of level1ro Integer32 .1.3.6.1.4.1.6296.101.56.3.4.1.11 |
sleIsisIfStatusCircuitL1WideMetricThe wide metric of level1ro Integer32 .1.3.6.1.4.1.6296.101.56.3.4.1.12 |
sleIsisIfStatusCircuitL1PriorityThe priority of level1ro Integer32 .1.3.6.1.4.1.6296.101.56.3.4.1.13 |
sleIsisIfStatusCircuitL1CircuitIdThe circuit id of level1ro Integer32 .1.3.6.1.4.1.6296.101.56.3.4.1.14 |
sleIsisIfStatusCircuitL1ActiveAdjacenciesThe active adjacencies of level1ro Integer32 .1.3.6.1.4.1.6296.101.56.3.4.1.15 |
sleIsisIfStatusCircuitL1LscpMtuThe MTU of level1ro Integer32 .1.3.6.1.4.1.6296.101.56.3.4.1.16 |
sleIsisIfStatusCircuitL2MetricThe narrow metric of level2ro Integer32 .1.3.6.1.4.1.6296.101.56.3.4.1.17 |
sleIsisIfStatusCircuitL2WideMetricThe wide metric of level2ro Integer32 .1.3.6.1.4.1.6296.101.56.3.4.1.18 |
sleIsisIfStatusCircuitL2PriorityThe priority of level2ro Integer32 .1.3.6.1.4.1.6296.101.56.3.4.1.19 |
sleIsisIfStatusCircuitL2CircuitIdThe circuit id of level2ro Integer32 .1.3.6.1.4.1.6296.101.56.3.4.1.20 |
sleIsisIfStatusCircuitL2ActiveAdjacenciesThe active adjacencies of level2ro Integer32 .1.3.6.1.4.1.6296.101.56.3.4.1.21 |
sleIsisIfStatusCircuitL2LscpMtuThe MTU of level2ro Integer32 .1.3.6.1.4.1.6296.101.56.3.4.1.22 |
sleIsisIfStatusL1HelloTimerBroadcastThe Level1 hello timer of broadcastro OCTET STRING .1.3.6.1.4.1.6296.101.56.3.4.1.23 |
sleIsisIfStatusL2HelloTimerBroadcastThe Level2 hello timer of broadcastro OCTET STRING .1.3.6.1.4.1.6296.101.56.3.4.1.24 |
sleIsisIfStatusL1HellotimerPoint2PointThe Level1 hello timer of porint to pointro OCTET STRING .1.3.6.1.4.1.6296.101.56.3.4.1.25 |
sleIsisIfStatusL2HellotimerPoint2PointThe Level2 hello timer of porint to pointro OCTET STRING .1.3.6.1.4.1.6296.101.56.3.4.1.26 |
sleISISInstIf OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.4 |
sleISISInstIfTableDescription. SEQUENCE OF SleISISInstIfEntry .1.3.6.1.4.1.6296.101.56.4.1 |
sleISISInstIfEntryDescription. SleISISInstIfEntry .1.3.6.1.4.1.6296.101.56.4.1.1 |
sleISISInstIfInstanceIdThe ISIS instance indexro Integer32 .1.3.6.1.4.1.6296.101.56.4.1.1.1 |
sleISISInstIfInterfaceIdThe ISIS interface indexro Integer32 .1.3.6.1.4.1.6296.101.56.4.1.1.2 |
sleISISPassiveInterfaceThe passive interface configuration.ro Enumeration .1.3.6.1.4.1.6296.101.56.4.1.1.3 |
sleISISInstIfControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.4.2 |
sleISISInstIfControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.101.56.4.2.1 |
sleISISInstIfControlStatusDescription.ro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.101.56.4.2.2 |
sleISISInstIfControlTimerDescription.rw Gauge32 .1.3.6.1.4.1.6296.101.56.4.2.3 |
sleISISInstIfControlTimeStampDescription.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.101.56.4.2.4 |
sleISISInstIfControlReqResultDescription.ro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.101.56.4.2.5 |
sleISISInstIfControlInstanceIdThe ISIS instance indexrw Integer32 .1.3.6.1.4.1.6296.101.56.4.2.6 |
sleISISInstIfControlInterfaceIdThe ISIS interface index ( 0 means all interface)rw Integer32 .1.3.6.1.4.1.6296.101.56.4.2.7 |
sleISISInstRedistribute OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.5 |
sleISISInstRedistProtocol OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.5.1 |
sleISISInstRedistProtocolTableDescription. SEQUENCE OF SleISISInstRedistProtocolEntry .1.3.6.1.4.1.6296.101.56.5.1.1 |
sleISISInstRedistProtocolEntryDescription. SleISISInstRedistProtocolEntry .1.3.6.1.4.1.6296.101.56.5.1.1.1 |
sleISISInstRedistProtocolInstanceIdThe ISIS instance indexro Integer32 .1.3.6.1.4.1.6296.101.56.5.1.1.1.1 |
sleISISInstRedistProtocolIdThe ISIS instance indexro Enumeration .1.3.6.1.4.1.6296.101.56.5.1.1.1.2 |
sleISISInstRedistProtocolMetricThe ISIS interface indexro Gauge32 .1.3.6.1.4.1.6296.101.56.5.1.1.1.3 |
sleISISInstRedistProtocolMetricTypeThe passive interface configuration.ro Enumeration .1.3.6.1.4.1.6296.101.56.5.1.1.1.4 |
sleISISInstRedistProtocolRouteLevelTypeThe passive interface configuration.ro Enumeration .1.3.6.1.4.1.6296.101.56.5.1.1.1.5 |
sleISISInstRedistProtocolRouteMapNameThe passive interface configuration.ro OCTET STRING .1.3.6.1.4.1.6296.101.56.5.1.1.1.6 |
sleISISInstRedistProtocolControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.5.1.2 |
sleISISInstRedistProtocolControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.101.56.5.1.2.1 |
sleISISInstRedistProtocolControlStatusDescription.ro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.101.56.5.1.2.2 |
sleISISInstRedistProtocolControlTimerDescription.rw Gauge32 .1.3.6.1.4.1.6296.101.56.5.1.2.3 |
sleISISInstRedistProtocolControlTimeStampDescription.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.101.56.5.1.2.4 |
sleISISInstRedistProtocolControlReqResultDescription.ro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.101.56.5.1.2.5 |
sleISISInstRedistProtocolControlInstanceIdThe ISIS instance indexrw Integer32 .1.3.6.1.4.1.6296.101.56.5.1.2.6 |
sleISISInstRedistProtocolControlIdThe ISIS interface index ( 0 means all interface)rw Enumeration .1.3.6.1.4.1.6296.101.56.5.1.2.7 |
sleISISInstRedistProtocolControlMetricThe ISIS interface index ( 0 means all interface)rw Gauge32 .1.3.6.1.4.1.6296.101.56.5.1.2.8 |
sleISISInstRedistProtocolControlMetricTypeThe ISIS interface index ( 0 means all interface)rw Enumeration .1.3.6.1.4.1.6296.101.56.5.1.2.9 |
sleISISInstRedistProtocolControlRouteLevelTypeThe ISIS interface index ( 0 means all interface)rw Enumeration .1.3.6.1.4.1.6296.101.56.5.1.2.10 |
sleISISInstRedistProtocolControlRouteMapNameThe ISIS interface index ( 0 means all interface)rw OCTET STRING .1.3.6.1.4.1.6296.101.56.5.1.2.11 |
sleISISInstRedistIsisProtocol OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.5.2 |
sleISISInstRedistIsisProtocolTableDescription. SEQUENCE OF SleISISInstRedistIsisProtocolEntry .1.3.6.1.4.1.6296.101.56.5.2.1 |
sleISISInstRedistIsisProtocolEntryDescription. SleISISInstRedistIsisProtocolEntry .1.3.6.1.4.1.6296.101.56.5.2.1.1 |
sleISISInstRedistIsisProtocolInstanceIdThe ISIS instance indexro Integer32 .1.3.6.1.4.1.6296.101.56.5.2.1.1.1 |
sleISISInstRedistIsisProtocolInterAreaFromLv1ToLv2The ISIS instance indexro Enumeration .1.3.6.1.4.1.6296.101.56.5.2.1.1.2 |
sleISISInstRedistIsisProtocolLv1Lv2DistributeListThe ISIS interface indexro OCTET STRING .1.3.6.1.4.1.6296.101.56.5.2.1.1.3 |
sleISISInstRedistIsisProtocolInterAreaFromLv2ToLv1The passive interface configuration.ro Enumeration .1.3.6.1.4.1.6296.101.56.5.2.1.1.4 |
sleISISInstRedistIsisProtocolLv2Lv1DistributeListThe passive interface configuration.ro OCTET STRING .1.3.6.1.4.1.6296.101.56.5.2.1.1.5 |
sleISISInstRedistIsisProtocolControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.5.2.2 |
sleISISInstRedistIsisProtocolControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.101.56.5.2.2.1 |
sleISISInstRedistIsisProtocolControlStatusDescription.ro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.101.56.5.2.2.2 |
sleISISInstRedistIsisProtocolControlTimerDescription.rw Gauge32 .1.3.6.1.4.1.6296.101.56.5.2.2.3 |
sleISISInstRedistIsisProtocolControlTimeStampDescription.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.101.56.5.2.2.4 |
sleISISInstRedistIsisProtocolControlReqResultDescription.ro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.101.56.5.2.2.5 |
sleISISInstRedistIsisProtocolControlInstanceIdThe ISIS instance indexrw Integer32 .1.3.6.1.4.1.6296.101.56.5.2.2.6 |
sleISISInstRedistIsisProtocolControlLv1Lv2DistributeListThe ISIS interface index ( 0 means all interface)rw OCTET STRING .1.3.6.1.4.1.6296.101.56.5.2.2.7 |
sleISISInstRedistIsisProtocolControlLv2Lv1DistributeListThe ISIS interface index ( 0 means all interface)rw OCTET STRING .1.3.6.1.4.1.6296.101.56.5.2.2.8 |
sleISISSummanryAddress OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.6 |
sleISISSummanryAddressTableDescription. SEQUENCE OF SleISISSummanryAddressEntry .1.3.6.1.4.1.6296.101.56.6.1 |
sleISISSummanryAddressEntryDescription. SleISISSummanryAddressEntry .1.3.6.1.4.1.6296.101.56.6.1.1 |
sleISISSummanryAddressInstanceIdThe ISIS instance indexro Integer32 .1.3.6.1.4.1.6296.101.56.6.1.1.1 |
sleISISSummanryAddressIpValueThe ISIS interface indexro IpAddress .1.3.6.1.4.1.6296.101.56.6.1.1.2 |
sleISISSummanryAddressIpNetmaskThe passive interface configuration.ro Integer32 .1.3.6.1.4.1.6296.101.56.6.1.1.3 |
sleISISSummanryAddressLevelThe passive interface configuration.ro Enumeration .1.3.6.1.4.1.6296.101.56.6.1.1.4 |
sleISISSummanryAddressMetricThe passive interface configuration.ro Integer32 .1.3.6.1.4.1.6296.101.56.6.1.1.5 |
sleISISSummanryAddressControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.6.2 |
sleISISSummanryAddressControlRequestThe request of a user commandrw Enumeration .1.3.6.1.4.1.6296.101.56.6.2.1 |
sleISISSummanryAddressControlStatusDescription.ro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.101.56.6.2.2 |
sleISISSummanryAddressControlTimerDescription.rw Gauge32 .1.3.6.1.4.1.6296.101.56.6.2.3 |
sleISISSummanryAddressControlTimeStampDescription.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.101.56.6.2.4 |
sleISISSummanryAddressControlReqResultDescription.ro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.101.56.6.2.5 |
sleISISSummanryAddressControlInstanceIdThe ISIS instance indexrw Integer32 .1.3.6.1.4.1.6296.101.56.6.2.6 |
sleISISSummanryAddressControlIpValueThe ISIS interface index ( 0 means all interface)rw IpAddress .1.3.6.1.4.1.6296.101.56.6.2.7 |
sleISISSummanryAddressControlIpNetmaskThe ISIS interface index ( 0 means all interface)rw Integer32 .1.3.6.1.4.1.6296.101.56.6.2.8 |
sleISISSummanryAddressControlLevelThe ISIS interface index ( 0 means all interface)rw Enumeration .1.3.6.1.4.1.6296.101.56.6.2.9 |
sleISISSummanryAddressControlMetricThe ISIS interface index ( 0 means all interface)rw Integer32 .1.3.6.1.4.1.6296.101.56.6.2.10 |
sleISISDatabase OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.7 |
sleISISDatabaseTableDescription. SEQUENCE OF SleISISDatabaseEntry .1.3.6.1.4.1.6296.101.56.7.1 |
sleISISDatabaseEntryDescription. SleISISDatabaseEntry .1.3.6.1.4.1.6296.101.56.7.1.1 |
sleISISDatabaseTagISIS database tag IDro OCTET STRING .1.3.6.1.4.1.6296.101.56.7.1.1.1 |
sleISISDatabaseLevelISIS database level indexro Integer32 .1.3.6.1.4.1.6296.101.56.7.1.1.2 |
sleISISDatabaseLspIdISIS database lsp IDro OCTET STRING .1.3.6.1.4.1.6296.101.56.7.1.1.3 |
sleISISDatabaseLspSeqNumISIS database lsp sequence numberro OCTET STRING .1.3.6.1.4.1.6296.101.56.7.1.1.4 |
sleISISDatabaseLspChecksumISIS database lsp Checksumro OCTET STRING .1.3.6.1.4.1.6296.101.56.7.1.1.5 |
sleISISDatabaseLspHoldtimeISIS database lsp Holdtimero OCTET STRING .1.3.6.1.4.1.6296.101.56.7.1.1.6 |
sleISISDatabaseAttISIS database attro Integer32 .1.3.6.1.4.1.6296.101.56.7.1.1.7 |
sleISISDatabasePISIS database partitionro Integer32 .1.3.6.1.4.1.6296.101.56.7.1.1.8 |
sleISISDatabaseOlISIS database overloadro Integer32 .1.3.6.1.4.1.6296.101.56.7.1.1.9 |
sleISISDatabaseDetail OBJECT IDENTIFIER .1.3.6.1.4.1.6296.101.56.8 |
sleISISDatabaseDetailTableDescription. SEQUENCE OF SleISISDatabaseDetailEntry .1.3.6.1.4.1.6296.101.56.8.1 |
sleISISDatabaseDetailEntryDescription. SleISISDatabaseDetailEntry .1.3.6.1.4.1.6296.101.56.8.1.1 |
sleISISDatabaseDetailTagISIS database tagro OCTET STRING .1.3.6.1.4.1.6296.101.56.8.1.1.1 |
sleISISDatabaseDetailLevelISIS database levelro Enumeration .1.3.6.1.4.1.6296.101.56.8.1.1.2 |
sleISISDatabaseDetailLspIdISIS database lsp idro OCTET STRING .1.3.6.1.4.1.6296.101.56.8.1.1.3 |
sleISISDatabaseDetailTypeISIS database lsp detail type.ro Enumeration .1.3.6.1.4.1.6296.101.56.8.1.1.4 |
sleISISDatabaseDetailIndexISIS database detail index.ro Integer32 .1.3.6.1.4.1.6296.101.56.8.1.1.5 |
sleISISDatabaseDetailPadISIS database lsp detail pad.ro OCTET STRING .1.3.6.1.4.1.6296.101.56.8.1.1.6 |
sleISISDatabaseDetailValueISIS database lsp detail vlaue.ro Integer32 .1.3.6.1.4.1.6296.101.56.8.1.1.7 |
sleISISDatabaseDetailDescriptionISIS database detail description.ro OCTET STRING .1.3.6.1.4.1.6296.101.56.8.1.1.8 |
sleISISGroupDescription. Unknown .1.3.6.1.4.1.6296.101.56.9 |