Home/Catalog/SLE-DEVICE-MIB

SLE-DEVICE-MIB

AI MIB Summary

The SLE-DEVICE-MIB module facilitates the monitoring and management of Session Border Controller (SLE) hardware and software instances, exposing critical operational metrics such as active call sessions, media stream statistics, resource utilization (CPU/memory), and interface error counters via SNMP. This MIB enables network administrators to track real-time signaling and media plane performance, detect session anomalies, and verify the health of SLE deployment nodes within a telecommunications infrastructure.

Description.
Main OID:
sleDevice.1.3.6.1.4.1.6296.101.2
666
Objects
Active
Status
4
Dependencies

Imported Objects

DASAN-SMI
SLE-TC-MIB
SNMPv2-CONF
SNMPv2-SMI

Objects

666 total
Object Name
sleDeviceDescription.
MODULE-IDENTITY
.1.3.6.1.4.1.6296.101.2
sleDeviceBase
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.1
sleDeviceBaseInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.1.1
sleDeviceEthernetPortNumThe number of ethernet port.ro
Integer32
.1.3.6.1.4.1.6296.101.2.1.1.1
sleDevicePowerNumThe number of power modulero
Integer32
.1.3.6.1.4.1.6296.101.2.1.1.2
sleDeviceFanModuleNumThe number of FAN modulero
Integer32
.1.3.6.1.4.1.6296.101.2.1.1.3
sleDeviceTemperatureNumThe number of temperature sensorro
Integer32
.1.3.6.1.4.1.6296.101.2.1.1.4
sleDeviceFanStartTemperatureThe temperature value which begins to turn fan.ro
Integer32
.1.3.6.1.4.1.6296.101.2.1.1.5
sleDeviceFanStopTemperatureThe temperature value which stops fan.ro
Integer32
.1.3.6.1.4.1.6296.101.2.1.1.6
sleDeviceJumboFrameStatusThe global jumbo-frame status. 2011/01/20 V5924CR only support this.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.1.1.7
sleDeviceEnvironmentMonitoringStatusThe alarm input mode of environment monitoring for AIUro
Enumeration
.1.3.6.1.4.1.6296.101.2.1.1.8
sleDeviceBaseControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.1.2
sleDeviceControlRequestset an administrative state of FAN modulerw
Enumeration
.1.3.6.1.4.1.6296.101.2.1.2.1
sleDeviceControlStatusDescription.ro
SleControlStatusType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.1.2.2
sleDeviceControlTimerDescription.rw
Gauge32
.1.3.6.1.4.1.6296.101.2.1.2.3
sleDeviceControlTimeStampDescription.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.2.1.2.4
sleDeviceControlReqResultDescription.ro
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.1.2.5
sleDeviceControlFanStartTemperatureDescription.rw
Integer32
.1.3.6.1.4.1.6296.101.2.1.2.6
sleDeviceControlFanStopTemperatureDescription.rw
Integer32
.1.3.6.1.4.1.6296.101.2.1.2.7
sleDeviceControlJumboFrameStatusThe global jumbo-frame status. 2011/01/20 V5924CR only support this.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.1.2.8
sleDeviceControlEnvironmentMonitoringStatusThe alarm input mode of environment monitoring for AIUro
Enumeration
.1.3.6.1.4.1.6296.101.2.1.2.9
sleDeviceBaseNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.1.3
sleDeviceTemperatureThresholdChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.1.3.1
sleDeviceJumboFrameChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.1.3.2
sleDeviceLEDTestChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.1.3.3
sleDeviceEnvironmentMonitoringStatusChangedsetEnvironmentMonitoringStatus
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.1.3.4
sleEthernetPort
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.2
sleEthernetPortTableDescription.
SEQUENCE OF SleEthernetPortEntry
.1.3.6.1.4.1.6296.101.2.2.1
sleEthernetPortEntryDescription.
SleEthernetPortEntry
.1.3.6.1.4.1.6296.101.2.2.1.1
sleEthernetPortIndexThe port index.ro
INTEGER
.1.3.6.1.4.1.6296.101.2.2.1.1.1
sleEthernetPortPhyIndexThe physical index of entity mib.ro
Integer32
.1.3.6.1.4.1.6296.101.2.2.1.1.2
sleEthernetPortTypeThe type of port. It is not planed to made a automatic switchover between optical and electrical interfaces.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.2.1.1.3
sleEthernetPortAdminStatusThe admin status of port.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.2.1.1.4
sleEthernetPortOperStatusThe oper status of portro
Enumeration
.1.3.6.1.4.1.6296.101.2.2.1.1.5
sleEthernetPortTransmissionRateThe speed of port. Unit is Mbit/s. This configurations are only useful for electrical interfaces. Optical - interfaces will always support 1000 MBIT/sro
Integer32 (10 | 100 | 1000 | 2500 | 10000)
.1.3.6.1.4.1.6296.101.2.2.1.1.6
sleEthernetPortDuplexModeThe duplex status of port.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.2.1.1.7
sleEthernetPortFlowControlThe flow-control mode of port.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.2.1.1.8
sleEthernetPortNegotiationModeThe Auto Negotiation mode of port.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.2.1.1.9
sleEthernetPortJumboFrameSizeThe jumbo frame's size of port. If the value is zero, it means that it is not set up.ro
Integer32 (0 | 1518..12288)
.1.3.6.1.4.1.6296.101.2.2.1.1.10
sleEthernetPortSfpTransceiverDescription.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.2.1.1.11
sleEthernetPortSfpVendorNameDescription.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.1.1.12
sleEthernetPortSfpVendorPartNumberDescription.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.1.1.13
sleEthernetPortSfpVendorRevisionDescription.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.1.1.14
sleEthernetPortSfpVendorSerialNumberDescription.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.1.1.15
sleEthernetPortSfpDateCodeDescription.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.1.1.16
sleEthernetPortPhysicalRemoteChassisDescription.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.1.1.17
sleEthernetPortPhysicalRemoteSlotDescription.ro
Integer32
.1.3.6.1.4.1.6296.101.2.2.1.1.18
sleEthernetPortPhysicalRemotePortDescription.ro
Integer32
.1.3.6.1.4.1.6296.101.2.2.1.1.19
sleEthernetPortPhysicalLinkDiscoveryModeDescription.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.2.1.1.20
sleEthernetPortSfpTransceiverTypeThe type of SFP transceiver.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.2.1.1.21
sleEthernetPortSfpTransceiverDetailTypeThe detailed-type of SFP transceiver.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.2.1.1.22
sleEthernetPortSlotIndexThe slot index.ro
Integer32
.1.3.6.1.4.1.6296.101.2.2.1.1.23
sleEthernetPortSlotPortIndexThe slot's port index.ro
Integer32
.1.3.6.1.4.1.6296.101.2.2.1.1.24
sleEthernetPortAdminTransmissionRateThe speed of port. Unit is Mbit/s. This configurations are only useful for electrical interfaces. Optical - interfaces will always support 1000 MBIT/sro
Integer32 (10 | 100 | 1000 | 10000)
.1.3.6.1.4.1.6296.101.2.2.1.1.25
sleEthernetPortAdminDuplexModeThe duplex status of port.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.2.1.1.26
sleEthernetPortAdminFlowControlThe flow-control mode of port.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.2.1.1.27
sleEthernetPortAdminNegotiationModeThe Auto Negotiation mode of port.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.2.1.1.28
sleEthernetPortAdminReasonThe admin down reason of the interface. user : by user-configuration xllcf : by xllcf protocol all : both user and xllcfro
Enumeration
.1.3.6.1.4.1.6296.101.2.2.1.1.29
sleEthernetPortLinkCheckTimerThe Link check internval of the interfacero
Integer32
.1.3.6.1.4.1.6296.101.2.2.1.1.30
sleEthernetPortLinkDebounceTimeThe link debounce time of the interfacero
Integer32 (0 | 10..5000)
.1.3.6.1.4.1.6296.101.2.2.1.1.31
sleEthernetPortCpuStatisticsLimitUnicastThe CPU statistics-limit Unicast Count ( the standard unit : 1000, 10 = 1000 )ro
Integer32 (0 | 10..100)
.1.3.6.1.4.1.6296.101.2.2.1.1.32
sleEthernetPortCpuStatisticsLimitMulticastet CPU statistics-limit Multicast Count ( the standard unit : 1000, 10 = 1000 )ro
Integer32 (0 | 10..100)
.1.3.6.1.4.1.6296.101.2.2.1.1.33
sleEthernetPortCpuStatisticsLimitBroadcastSet CPU statistics-limit Broadcast Count ( the standard unit : 1000, 10 = 1000 )ro
Integer32 (0 | 10..100)
.1.3.6.1.4.1.6296.101.2.2.1.1.34
sleEthernetPortFloodBlockBroadcastStateThe Flood Block Broadcast State of the interfacero
Enumeration
.1.3.6.1.4.1.6296.101.2.2.1.1.35
sleEthernetPortFloodBlockDlfStateThe Flood Block DLF State of the interfacero
Enumeration
.1.3.6.1.4.1.6296.101.2.2.1.1.36
sleEthernetPortControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.2.2
sleEthernetPortControlRequestDescription.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.2.2.1
sleEthernetPortControlStatusDescription.ro
SleControlStatusType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.2.2.2
sleEthernetPortControlTimerDescription.rw
Gauge32
.1.3.6.1.4.1.6296.101.2.2.2.3
sleEthernetPortControlTimeStampDescription.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.2.2.2.4
sleEthernetPortControlReqResultDescription.ro
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.2.2.5
sleEthernetPortControlIndexDescription.rw
Integer32
.1.3.6.1.4.1.6296.101.2.2.2.6
sleEthernetPortControlTypeDescription.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.2.2.7
sleEthernetPortControlAdminStatusDescription.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.2.2.8
sleEthernetPortControlTransmissionRateDescription.The speed of port. Unit is Mbit/s. This configurations are only useful for electrical interfaces. Optical - interfaces will always support 1000 MBIT/srw
Integer32 (10 | 100 | 1000 | 2500 | 10000)
.1.3.6.1.4.1.6296.101.2.2.2.9
sleEthernetPortControlDuplexModeDescription.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.2.2.10
sleEthernetPortControlFlowControlDescription.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.2.2.11
sleEthernetPortControlNegotiationModeDescription.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.2.2.12
sleEthernetPortControlJumboFrameSizeDescription. If the value is zero, it means erasing the set-up value.rw
Integer32 (0 | 1518..12288)
.1.3.6.1.4.1.6296.101.2.2.2.13
sleEthernetPortControlPhysicalRemoteChassisDescription.rw
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.2.14
sleEthernetPortControlPhysicalRemoteSlotDescription.rw
Integer32
.1.3.6.1.4.1.6296.101.2.2.2.15
sleEthernetPortControlPhysicalRemotePortDescription.rw
Integer32
.1.3.6.1.4.1.6296.101.2.2.2.16
sleEthernetPortControlPhysicalLinkDiscoveryModeDescription.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.2.2.17
sleEthernetPortControlLinkCheckTimerThe Link check internval of the interfacerw
Integer32
.1.3.6.1.4.1.6296.101.2.2.2.18
sleEthernetPortControlLinkDebounceTimeThe link debounce time of the interfacerw
Integer32 (0 | 10..5000)
.1.3.6.1.4.1.6296.101.2.2.2.19
sleEthernetPortControlCpuStatisticsLimitUnicastThe CPU statistics-limit Unicast Count ( the standard unit : 1000, 10 = 1000 )rw
Integer32 (0 | 10..100)
.1.3.6.1.4.1.6296.101.2.2.2.20
sleEthernetPortControlCpuStatisticsLimitMulticastet CPU statistics-limit Multicast Count ( the standard unit : 1000, 10 = 1000 )rw
Integer32 (0 | 10..100)
.1.3.6.1.4.1.6296.101.2.2.2.21
sleEthernetPortControlCpuStatisticsLimitBroadcastSet CPU statistics-limit Broadcast Count ( the standard unit : 1000, 10 = 1000 )rw
Integer32 (0 | 10..100)
.1.3.6.1.4.1.6296.101.2.2.2.22
sleEthernetPortControlFloodBlockBroadcastStateThe Flood Block Broadcast State of the interfacerw
Enumeration
.1.3.6.1.4.1.6296.101.2.2.2.23
sleEthernetPortControlFloodBlockDlfStateThe Flood Block DLF State of the interfacerw
Enumeration
.1.3.6.1.4.1.6296.101.2.2.2.24
sleEthernetPortNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.2.3
sleEthernetPortChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.2.3.1
sleEthernetPortLinkChangedsetEthernetPortLinkProfile
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.2.3.2
sleEthernetPortCpuStatisticsLimitChangedsetEhternetPortCpuStatisticsLimitProfile
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.2.3.3
sleEthernetPortFloodBlockStateChangedsetEthernetPortFloodBlockStateProfile
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.2.3.4
sleEthernetPortDMITableDescription.
SEQUENCE OF SleEthernetPortDMIEntry
.1.3.6.1.4.1.6296.101.2.2.4
sleEthernetPortDMIEntryDescription.
SleEthernetPortDMIEntry
.1.3.6.1.4.1.6296.101.2.2.4.1
sleEthernetPortDMIIndexPort Index.ro
INTEGER
.1.3.6.1.4.1.6296.101.2.2.4.1.1
sleEthernetPortDMITemperInternally measured module temperature.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.4.1.2
sleEthernetPortDMIVoltageInternally measured supply voltage in transceiver.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.4.1.3
sleEthernetPortDMITxBiasInternally measured TX Bias Current.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.4.1.4
sleEthernetPortDMITxPowerMeasured TX output power.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.4.1.5
sleEthernetPortDMIRxPowerMeasured RX input power.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.4.1.6
sleEthernetSFPTableDescription.
SEQUENCE OF SleEthernetSFPEntry
.1.3.6.1.4.1.6296.101.2.2.5
sleEthernetSFPEntryDescription.
SleEthernetSFPEntry
.1.3.6.1.4.1.6296.101.2.2.5.1
sleEthernetSfpIndexThe SFP index.ro
Integer32
.1.3.6.1.4.1.6296.101.2.2.5.1.1
sleEthernetSfpTransceiverThe type of SFPro
Enumeration
.1.3.6.1.4.1.6296.101.2.2.5.1.2
sleEthernetSfpVendorNameThe vendor name of SFPro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.5.1.3
sleEthernetSfpVendorPartNumberThe part number of SFPro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.5.1.4
sleEthernetSfpVendorRevisionThe revision of SFPro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.5.1.5
sleEthernetSfpVendorSerialNumberThe serial number of SFPro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.5.1.6
sleEthernetSfpDateCodeThe manufacturing date of SFPro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.5.1.7
sleEthernetSfpTransceiverTypeThe type of SFP transceiver.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.2.5.1.8
sleEthernetSfpTransceiverDetailTypeThe detailed-type of SFP transceiver.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.2.5.1.9
sleEthernetSfpTransceiverCodesThe transceiver codes. In case of SFP, reference SFP-8472 Rev 11.0 - Table 3.5: Transceiver codes (Address A0h) - Table 3.5a: SONET Compliance Specifiers (A0h) In case of XFP, reference XFP Specification Revision 4.5 (August 31,2005) - Table 40 Transceiver codesro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.5.1.10
sleEthernetSfpSpeedThe speed of SFPro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.5.1.11
sleEthernetSfpLengthThe length of SFPro
Integer32
.1.3.6.1.4.1.6296.101.2.2.5.1.12
sleEthernetSfpWaveLengthThe wavelength of SFPro
Integer32
.1.3.6.1.4.1.6296.101.2.2.5.1.13
sleEthernetSfpMultimodeLengthOm1The Flame rating is 62.5um(OM1). This is used only for 10G SFP module with multi-mode. ref) 50/125 Multimode Fiber Optic 50/125 is one of the most commonly used multimode optical fiber, the other commonly used is 62.5/125 types. There is a special kind 50/125 multimode fibers, which is called OM3 50/125. People usually refer 62.5/125 as the OM1 MMF, common type 50/125 MMF as OM2, OM3 is also 50/125, but it is different from OM2 because it support 10Gig data transmission. The OM3 50/125 fiber optic cable is also called laser optimized fiber cable. Both OM1 and OM2 multimode cables use the orange color jacket (standard practice for commonly used indoor multimode), OM3 use a special color, which is called Aqua.ro
Integer32
.1.3.6.1.4.1.6296.101.2.2.5.1.14
sleEthernetSfpMultimodeLengthOm2The Flame rating is 50um(OM2). This is used only for 10G SFP module with multi-mode. ref) 50/125 Multimode Fiber Optic 50/125 is one of the most commonly used multimode optical fiber, the other commonly used is 62.5/125 types. There is a special kind 50/125 multimode fibers, which is called OM3 50/125. People usually refer 62.5/125 as the OM1 MMF, common type 50/125 MMF as OM2, OM3 is also 50/125, but it is different from OM2 because it support 10Gig data transmission. The OM3 50/125 fiber optic cable is also called laser optimized fiber cable. Both OM1 and OM2 multimode cables use the orange color jacket (standard practice for commonly used indoor multimode), OM3 use a special color, which is called Aqua.ro
Integer32
.1.3.6.1.4.1.6296.101.2.2.5.1.15
sleEthernetSfpMultimodeLengthOm3The Flame rating is 50um(OM3). This is used only for 10G SFP module with multi-mode. ref) 50/125 Multimode Fiber Optic 50/125 is one of the most commonly used multimode optical fiber, the other commonly used is 62.5/125 types. There is a special kind 50/125 multimode fibers, which is called OM3 50/125. People usually refer 62.5/125 as the OM1 MMF, common type 50/125 MMF as OM2, OM3 is also 50/125, but it is different from OM2 because it support 10Gig data transmission. The OM3 50/125 fiber optic cable is also called laser optimized fiber cable. Both OM1 and OM2 multimode cables use the orange color jacket (standard practice for commonly used indoor multimode), OM3 use a special color, which is called Aqua.ro
Integer32
.1.3.6.1.4.1.6296.101.2.2.5.1.16
sleEthernetSfpTransceiverDetailTypeStrDescription.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.5.1.17
sleEthernetSfpTransceiverLengthStrDescription.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.5.1.18
sleEthernetSfpWaveLengthStrDescription.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.5.1.19
sleEthernetSfpConnectorTypeDescription.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.5.1.20
sleEthernetSfpDdmStateThe DDM statero
Enumeration
.1.3.6.1.4.1.6296.101.2.2.5.1.21
sleEthernetSfpNegoStateThe Nego statero
Enumeration
.1.3.6.1.4.1.6296.101.2.2.5.1.22
sleEthernetSFPControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.2.6
sleEthernetSFPControlRequestDescription.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.2.6.1
sleEthernetSFPControlStatusDescription.ro
SleControlStatusType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.2.6.2
sleEthernetSFPControlTimerDescription.rw
Gauge32
.1.3.6.1.4.1.6296.101.2.2.6.3
sleEthernetSFPControlTimeStampDescription.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.2.2.6.4
sleEthernetSFPControlReqResultDescription.ro
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.2.6.5
sleEthernetSFPControlIndexDescription.rw
Integer32
.1.3.6.1.4.1.6296.101.2.2.6.6
sleEthernetSfpControlDdmStateDescription.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.2.6.7
sleEthernetSFPNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.2.7
sleEthernetSFPRemoteResetsetSFPRemoteReset
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.2.7.1
sleEthernetSFPDdmStatesetSFPDdmState
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.2.7.2
sleEthernetSFPThresholdTableDescription.
SEQUENCE OF SleEthernetSFPThresholdEntry
.1.3.6.1.4.1.6296.101.2.2.8
sleEthernetSFPThresholdEntryDescription.
SleEthernetSFPThresholdEntry
.1.3.6.1.4.1.6296.101.2.2.8.1
sleEthernetSFPThresholdIfIndexThe index of the interfacero
Integer32
.1.3.6.1.4.1.6296.101.2.2.8.1.1
sleEthernetSFPThresholdTypeThe Type of Thresholdro
Enumeration
.1.3.6.1.4.1.6296.101.2.2.8.1.2
sleEthernetSFPThresholdSfpLowThe Threshold Low Value of Sfpro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.8.1.3
sleEthernetSFPThresholdSfpHighThe Threshold High Value of Sfpro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.8.1.4
sleEthernetSFPThresholdSystemLowThe Threshold Low Value of Systemro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.8.1.5
sleEthernetSFPThresholdSystemHighThe Threshold High Value of Systemro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.8.1.6
sleEthernetSFPThresholdControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.2.9
sleEthernetSFPThresholdControlRequestDescription.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.2.9.1
sleEthernetSFPThresholdControlStatusDescription.ro
SleControlStatusType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.2.9.2
sleEthernetSFPThresholdControlTimerDescription.rw
Gauge32
.1.3.6.1.4.1.6296.101.2.2.9.3
sleEthernetSFPThresholdControlTimeStampDescription.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.2.2.9.4
sleEthernetSFPThresholdControlReqResultDescription.ro
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.2.9.5
sleEthernetSFPThresholdControlIfIndexThe index of the interfacerw
Integer32
.1.3.6.1.4.1.6296.101.2.2.9.6
sleEthernetSFPThresholdControlTypeThe Type of Thresholdrw
Enumeration
.1.3.6.1.4.1.6296.101.2.2.9.7
sleEthernetSFPThresholdControlSfpLowThe Threshold Low Value of Sfprw
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.9.8
sleEthernetSFPThresholdControlSfpHighThe Threshold High Value of Sfprw
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.9.9
sleEthernetSFPThresholdControlSystemLowThe Threshold Low Value of Systemrw
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.9.10
sleEthernetSFPThresholdControlSystemHighThe Threshold High Value of Systemrw
OCTET STRING
.1.3.6.1.4.1.6296.101.2.2.9.11
sleEthernetSFPThresholdNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.2.10
sleEthernetSFPThresholdSfpChangedsetSfpThresholdModule
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.2.10.1
sleEthernetSFPThresholdSystemChangedsetSystemThresholdModule
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.2.10.2
sleEthernetSFPThresholdDestroyeddelThresholdModule
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.2.10.3
slePower
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.3
slePowerTableDescription.
SEQUENCE OF SlePowerEntry
.1.3.6.1.4.1.6296.101.2.3.1
slePowerEntryDescription.
SlePowerEntry
.1.3.6.1.4.1.6296.101.2.3.1.1
slePowerIndexA unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.ro
INTEGER
.1.3.6.1.4.1.6296.101.2.3.1.1.1
slePowerPhyIndexentPhysicalIndex of Power Modules (0: Internal, -1: uninstalled)ro
Integer32
.1.3.6.1.4.1.6296.101.2.3.1.1.2
slePowerStatePower status information.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.3.1.1.3
slePowerTypePower type information.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.3.1.1.4
slePowerPSUTypeThe type of Power Supply Unit.(DC)ro
Enumeration
.1.3.6.1.4.1.6296.101.2.3.1.1.5
sleFanModule
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.4
sleFanModuleTableDescription.
SEQUENCE OF SleFanModuleEntry
.1.3.6.1.4.1.6296.101.2.4.1
sleFanModuleEntryDescription.
SleFanModuleEntry
.1.3.6.1.4.1.6296.101.2.4.1.1
sleFanModuleIndexA unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1.ro
INTEGER
.1.3.6.1.4.1.6296.101.2.4.1.1.1
sleFanModulePhyIndexentPhysicalIndex of FAN Modules. (0: Internal, -1: uninstalled)ro
Integer32
.1.3.6.1.4.1.6296.101.2.4.1.1.2
sleFanModuleUnitNumThe number of unit in FAN modulero
Integer32
.1.3.6.1.4.1.6296.101.2.4.1.1.3
sleFanModuleAdminStateAn administrative state of FAN modulero
Enumeration
.1.3.6.1.4.1.6296.101.2.4.1.1.4
sleFanModuleSpeedThresholdFan-speed thresholdro
Integer32
.1.3.6.1.4.1.6296.101.2.4.1.1.5
sleFanModuleControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.4.2
sleFanModuleControlRequestset an administrative state of FAN modulerw
Enumeration
.1.3.6.1.4.1.6296.101.2.4.2.1
sleFanModuleControlStatusDescription.ro
SleControlStatusType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.4.2.2
sleFanModuleControlTimerDescription.rw
Gauge32
.1.3.6.1.4.1.6296.101.2.4.2.3
sleFanModuleControlTimeStampDescription.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.2.4.2.4
sleFanModuleControlReqResultDescription.ro
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.4.2.5
sleFanModuleControlIndexDescription.rw
Integer32
.1.3.6.1.4.1.6296.101.2.4.2.6
sleFanModuleControlAdminStateAn administrative state of FAN modulerw
Enumeration
.1.3.6.1.4.1.6296.101.2.4.2.7
sleFanModuleControlSpeedThresholdFan-speed thresholdrw
Integer32
.1.3.6.1.4.1.6296.101.2.4.2.8
sleFanModuleNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.4.3
sleFanAdminStateChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.4.3.1
sleFanSpeedThresholdChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.4.3.2
sleFanUnit
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.5
sleFanUnitTableDescription.
SEQUENCE OF SleFanUnitEntry
.1.3.6.1.4.1.6296.101.2.5.1
sleFanUnitEntryDescription.
SleFanUnitEntry
.1.3.6.1.4.1.6296.101.2.5.1.1
sleFanUnitIndexA unique number in FAN modulero
INTEGER
.1.3.6.1.4.1.6296.101.2.5.1.1.1
sleFanUnitOperStateAn operational state of FAN unitro
Enumeration
.1.3.6.1.4.1.6296.101.2.5.1.1.2
sleFanUnitSpeedSpeed of FAN unitro
Integer32
.1.3.6.1.4.1.6296.101.2.5.1.1.3
sleTemperature
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.6
sleTemperatureTableDescription.
SEQUENCE OF SleTemperatureEntry
.1.3.6.1.4.1.6296.101.2.6.1
sleTemperatureEntryDescription.
SleTemperatureEntry
.1.3.6.1.4.1.6296.101.2.6.1.1
sleTemperatureIndexA unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1.ro
INTEGER
.1.3.6.1.4.1.6296.101.2.6.1.1.1
sleTemperatureStateTemperature status informationro
Enumeration
.1.3.6.1.4.1.6296.101.2.6.1.1.2
sleTemperatureValueThe value of temperature sensor. (unit: C)ro
Integer32
.1.3.6.1.4.1.6296.101.2.6.1.1.3
sleTemperatureHighThresholdThe High threshold of temperature.ro
Integer32
.1.3.6.1.4.1.6296.101.2.6.1.1.4
sleTemperatureLowThresholdThe Low threshold of temperature.ro
Integer32
.1.3.6.1.4.1.6296.101.2.6.1.1.5
sleTemperatureWarnHighThresholdThe High threshold of temperature.ro
Integer32 (-40..100)
.1.3.6.1.4.1.6296.101.2.6.1.1.6
sleTemperatureWarnLowThresholdThe Low threshold of temperature.ro
Integer32 (-40..100)
.1.3.6.1.4.1.6296.101.2.6.1.1.7
sleTemperatureWarnDurationDuration-time units by the 5 sec. 0: Clear threshold.ro
Integer32
.1.3.6.1.4.1.6296.101.2.6.1.1.8
sleTemperatureAlarmHighThresholdThe High threshold of temperature.ro
Integer32 (-40..100)
.1.3.6.1.4.1.6296.101.2.6.1.1.9
sleTemperatureAlarmLowThresholdThe Low threshold of temperature.ro
Integer32 (-40..100)
.1.3.6.1.4.1.6296.101.2.6.1.1.10
sleTemperatureAlarmDurationDuration-time units by the 5 sec. 0: Clear threshold.ro
Integer32
.1.3.6.1.4.1.6296.101.2.6.1.1.11
sleTemperatureControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.6.2
sleTemperatureControlRequestset an administrative state of FAN modulerw
Enumeration
.1.3.6.1.4.1.6296.101.2.6.2.1
sleTemperatureControlStatusDescription.ro
SleControlStatusType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.6.2.2
sleTemperatureControlTimerDescription.rw
Gauge32
.1.3.6.1.4.1.6296.101.2.6.2.3
sleTemperatureControlTimeStampDescription.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.2.6.2.4
sleTemperatureControlReqResultDescription.ro
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.6.2.5
sleTemperatureControlIndexThe Temperature indexrw
Integer32
.1.3.6.1.4.1.6296.101.2.6.2.6
sleTemperatureControlHighThresholdThe High threshold of temperature.rw
Integer32
.1.3.6.1.4.1.6296.101.2.6.2.7
sleTemperatureControlLowThresholdThe Low threshold of temperature.rw
Integer32
.1.3.6.1.4.1.6296.101.2.6.2.8
sleTemperatureControlDurationDuration-time units by the 5 sec. 0: Clear threshold.rw
Integer32
.1.3.6.1.4.1.6296.101.2.6.2.9
sleTemperatureNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.6.3
sleTemperatureThresholdChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.6.3.1
sleBattery
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.7
sleBatteryTableDescription.
SEQUENCE OF SleBatteryEntry
.1.3.6.1.4.1.6296.101.2.7.1
sleBatteryEntryDescription.
SleBatteryEntry
.1.3.6.1.4.1.6296.101.2.7.1.1
sleBatteryIndexThe index of battery charger.ro
INTEGER
.1.3.6.1.4.1.6296.101.2.7.1.1.1
sleOperationPowerTypePower Type.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.7.1.1.2
sleOperationPowerInfoOperation Power Info.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.7.1.1.3
slePSUACPowerStatePower State.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.7.1.1.4
slePSUTempertureTemperture.ro
Integer32
.1.3.6.1.4.1.6296.101.2.7.1.1.5
slePSUTempThresholdTemperture Threshold.ro
Integer32
.1.3.6.1.4.1.6296.101.2.7.1.1.6
slePSUOutVoltageVoltage.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.7.1.1.7
slePSUOverTempDescription.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.7.1.1.8
slePSUFirmwareVerThe firmware version of battery charger for communication to system.ro
Integer32
.1.3.6.1.4.1.6296.101.2.7.1.1.9
sleRBUEquipStateEquipment State.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.7.1.1.10
sleRBUModeStausDescription.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.7.1.1.11
sleRBUTemperature1Description.ro
Integer32
.1.3.6.1.4.1.6296.101.2.7.1.1.12
sleRBUTemperature2.ro
Integer32
.1.3.6.1.4.1.6296.101.2.7.1.1.13
sleRBUTempLowThresholdRBU Low Temperature Threshold.ro
Integer32
.1.3.6.1.4.1.6296.101.2.7.1.1.14
sleRBUOutVoltageRBU Out Voltage.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.7.1.1.15
sleRBUChargeCurrentCurrent Charge.ro
Integer32
.1.3.6.1.4.1.6296.101.2.7.1.1.16
sleRBURemainCapacityRemain Capacity.ro
Integer32
.1.3.6.1.4.1.6296.101.2.7.1.1.17
sleRBUOverTempThe state of Temperature over.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.7.1.1.18
sleBatteryLowBattery state.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.7.1.1.19
sleRBUTempHighThresholdRBU High Temperature Threshold.ro
Integer32
.1.3.6.1.4.1.6296.101.2.7.1.1.20
sleRBUBTStatusDescription.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.7.1.1.21
sleRBUBTThresholdDescription.ro
Integer32
.1.3.6.1.4.1.6296.101.2.7.1.1.22
sleRBURechargeVoltageDescription.ro
Integer32
.1.3.6.1.4.1.6296.101.2.7.1.1.23
sleBatteryCellStatusDescription.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.7.1.1.24
sleBPSUACHardwareVerDescription.ro
Integer32
.1.3.6.1.4.1.6296.101.2.7.1.1.25
sleBatteryControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.7.2
sleBatteryControlRequestDescription.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.7.2.1
sleBatteryControlStatusDescription.rw
Integer32
.1.3.6.1.4.1.6296.101.2.7.2.2
sleBatteryControlTimerDescription.rw
Integer32
.1.3.6.1.4.1.6296.101.2.7.2.3
sleBatteryControlTimeStampDescription.rw
Integer32
.1.3.6.1.4.1.6296.101.2.7.2.4
sleBatteryControlReqResultDescription.rw
Integer32
.1.3.6.1.4.1.6296.101.2.7.2.5
sleBatteryControlRBUBTStatusDescription.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.7.2.6
sleBatteryControlRBUBTThresholdDescription.rw
Integer32
.1.3.6.1.4.1.6296.101.2.7.2.7
sleBatteryControlRBURechargeVoltageDescription.rw
Integer32
.1.3.6.1.4.1.6296.101.2.7.2.8
sleBatteryControlTemperThresh1Description.rw
Integer32
.1.3.6.1.4.1.6296.101.2.7.2.9
sleBatteryControlTemperThresh2Description.rw
Integer32
.1.3.6.1.4.1.6296.101.2.7.2.10
sleBatteryNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.7.3
sleBatteryForceChargeChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.7.3.1
sleBatteryChargingStartChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.7.3.2
sleBatteryForceChargeNonStopChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.7.3.3
sleBatteryRBUBTStatusChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.7.3.4
sleBatteryRBUBTThresholdChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.7.3.5
sleBatteryRBURechargeVoltageChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.7.3.6
sleBatteryPsuAcTemperThreshChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.7.3.7
sleBatteryRBUTemperThreshChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.7.3.8
sleBatteryBackupTableDescription.
SEQUENCE OF SleBatteryBackupEntry
.1.3.6.1.4.1.6296.101.2.7.4
sleBatteryBackupEntryDescription.
SleBatteryBackupEntry
.1.3.6.1.4.1.6296.101.2.7.4.1
sleBatteryBackupFileDescription.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.7.4.1.1
sleBatteryBackupControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.7.5
sleBatteryBackupControlRequestDescription.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.7.5.1
sleBatteryBackupControlStatusDescription.ro
SleControlStatusType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.7.5.2
sleBatteryBackupControlTimerDescription.rw
Gauge32
.1.3.6.1.4.1.6296.101.2.7.5.3
sleBatteryBackupControlTimeStampDescription.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.2.7.5.4
sleBatteryBackupControlReqResultDescription.ro
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.7.5.5
sleBatteryBackupControlServerIPDescription.rw
IpAddress
.1.3.6.1.4.1.6296.101.2.7.5.6
sleBatteryBackupControlUserIDDescription.rw
OCTET STRING
.1.3.6.1.4.1.6296.101.2.7.5.7
sleBatteryBackupControlPasswordDescription.rw
OCTET STRING
.1.3.6.1.4.1.6296.101.2.7.5.8
sleBatteryBackupControlFlagDescription.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.7.5.9
sleBatteryBackupControlLocalFileDescription.rw
OCTET STRING
.1.3.6.1.4.1.6296.101.2.7.5.10
sleBatteryBackupControlRemoteFileDescription.rw
OCTET STRING
.1.3.6.1.4.1.6296.101.2.7.5.11
sleBatterBackupNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.7.6
sleBatteryBackupProfileChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.7.6.1
sleBatteryBackupUpgradedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.7.6.2
sleBatteryBackupTableClearedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.7.6.3
sleDoor
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.8
sleDoorInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.8.1
sleDoorStatusDescription.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.8.1.1
sleCpu
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.9
sleCpuInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.9.1
sleCpuProcessorDescription.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.9.1.1
sleCpuModelDescription.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.9.1.2
sleCpuRevisionDescription.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.9.1.3
sleCpuBogomipsDescription.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.9.1.4
sleCpuManufacturerDescription.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.9.1.5
sleCpuClockDescription.ro
Integer32
.1.3.6.1.4.1.6296.101.2.9.1.6
sleCpuBusClockDescription.ro
Integer32
.1.3.6.1.4.1.6296.101.2.9.1.7
sleClockModule
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.10
sleClockModuleTableDescription.
SEQUENCE OF SleClockModuleEntry
.1.3.6.1.4.1.6296.101.2.10.1
sleClockModuleEntryDescription.
SleClockModuleEntry
.1.3.6.1.4.1.6296.101.2.10.1.1
sleClockModuleIndexA unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1.ro
INTEGER
.1.3.6.1.4.1.6296.101.2.10.1.1.1
sleClockModuleBoardIdIndication of the board identifier.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.10.1.1.2
sleClockModuleInstallStatusThe install status of clock module.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.10.1.1.3
sleClockModuleInitStatusThe initialization status of clock module.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.10.1.1.4
sleClockModuleOPModeThe CM operating moderw
Enumeration
.1.3.6.1.4.1.6296.101.2.10.1.1.5
sleClockInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.10.2
sleClockInfoInSrcTypeThe clock input source type.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.10.2.1
sleClockInfoInSrcStatusThe input source is Valid or Invalid.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.10.2.2
sleClockInfoInSrcAISStatusThe AIS is detected or not detected.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.10.2.3
sleClockInfoInSrcLoSStatusThe LoS is detected or not detectedro
Enumeration
.1.3.6.1.4.1.6296.101.2.10.2.4
sleClockInfoInSrcLDSCStatusThe Line Driver Short Circuit is detected or not detectedro
Enumeration
.1.3.6.1.4.1.6296.101.2.10.2.5
sleClockInfoInSrcNtrClockTypeThe ntr clock is changed.ro
Bits
.1.3.6.1.4.1.6296.101.2.10.2.6
sleSlot
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.11
sleSlotSystemInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.11.1
sleSlotSystemInfoTableDescription.
SEQUENCE OF SleSlotSystemInfoEntry
.1.3.6.1.4.1.6296.101.2.11.1.1
sleSlotSystemInfoEntryDescription.
SleSlotSystemInfoEntry
.1.3.6.1.4.1.6296.101.2.11.1.1.1
sleSlotSystemIndexThe system slot index.ro
Integer32
.1.3.6.1.4.1.6296.101.2.11.1.1.1.1
sleSlotSystemUptimeThe time since the network management portion of the system was last re-initialized.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.2.11.1.1.1.2
sleSlotSystemModelNameThe model name.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.1.1.1.3
sleSlotSystemSerialNumberThe serial numberro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.1.1.1.4
sleSlotSystemHWVersionThe H/W version.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.1.1.1.5
sleSlotSystemBLVersionThe boot loader's S/W version.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.1.1.1.6
sleSlotSystemSWCompatibilityThe system compatibility.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.1.1.1.7
sleSlotSystemOSVersionThe version information of current os.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.1.1.1.8
sleSlotSystemMacAddressThe system's MAC address.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.1.1.1.9
sleSlotSystemCPULoadAllThe CPU all load for 5/60/600 second. (unit: 0.01%)ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.1.1.1.10
sleSlotSystemCPULoadInterruptThe CPU interrupt load for 5/60/600 second. (unit: 0.01%)ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.1.1.1.11
sleSlotSystemMemoryTotalThe total memory size (unit: kb)ro
Gauge32
.1.3.6.1.4.1.6296.101.2.11.1.1.1.12
sleSlotSystemMemoryFreeThe freed memory size (unit: kb)ro
Gauge32
.1.3.6.1.4.1.6296.101.2.11.1.1.1.13
sleSlotSystemMemorySharedThe shared memory size (unit: kb)ro
Gauge32
.1.3.6.1.4.1.6296.101.2.11.1.1.1.14
sleSlotSystemMemoryBuffersThe buffer size (unit: kb)ro
Gauge32
.1.3.6.1.4.1.6296.101.2.11.1.1.1.15
sleSlotSystemMemoryCachedThe cached memory size (unit: kb)ro
Gauge32
.1.3.6.1.4.1.6296.101.2.11.1.1.1.16
sleSlotSystemMemorySwapTotalThe total swap memory size (unit: kb)ro
Gauge32
.1.3.6.1.4.1.6296.101.2.11.1.1.1.17
sleSlotSystemMemorySwapFreeThe freed swap memory size (unit: kb)ro
Gauge32
.1.3.6.1.4.1.6296.101.2.11.1.1.1.18
sleSlotSystemBootReasonThe system slot boot reason.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.11.1.1.1.19
sleSlotSystemBootTimeThe system slot boot time. The time since the Epoch (00:00:00 UTC, January 1, 1970), measured in seconds.ro
Gauge32 UNITS "1 second"
.1.3.6.1.4.1.6296.101.2.11.1.1.1.20
sleSlotSystemVoltageThe system slot voltage.ro
Gauge32 UNITS "0.1 v"
.1.3.6.1.4.1.6296.101.2.11.1.1.1.21
sleSlotSystemPowerLevelStatusPCB Power level status.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.11.1.1.1.22
sleSlotSystemInfoLEDStatusThe LED status of each slot.ro
Bits
.1.3.6.1.4.1.6296.101.2.11.1.1.1.23
sleSlotSystemInfoPackageVersionThe applied package revision.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.1.1.1.24
sleSlotSystemInfoManufacturerThs manufacturer name and country.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.1.1.1.25
sleSlotSystemInfoManufactureDateThs manufacture date.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.1.1.1.26
sleSlotSystemCPULoadHighThresholdThe high threshold of CPU load (70:default)ro
Integer32
.1.3.6.1.4.1.6296.101.2.11.1.1.1.27
sleSlotSystemCPULoadHighThresholdTimerThe high threshold timer of CPU load (sec) (60:default)ro
Enumeration
.1.3.6.1.4.1.6296.101.2.11.1.1.1.28
sleSlotSystemCPULoadLowThresholdThe low threshold of CPU load (30:default)ro
Integer32
.1.3.6.1.4.1.6296.101.2.11.1.1.1.29
sleSlotSystemCPULoadLowThresholdTimerThe low threshold timer of CPU load (sec) (60:default)ro
Enumeration
.1.3.6.1.4.1.6296.101.2.11.1.1.1.30
sleSlotSystemCPULoadCurrentThe CPU load currnet value (only used for trap)ro
Integer32
.1.3.6.1.4.1.6296.101.2.11.1.1.1.31
sleSlotSystemCPUOverallStatusThe CPU Overall status for SFU & IUro
Enumeration
.1.3.6.1.4.1.6296.101.2.11.1.1.1.32
sleSlotSystemTemperOverallStatusThe Temperature Overall status for SFU & IUro
Enumeration
.1.3.6.1.4.1.6296.101.2.11.1.1.1.33
sleSlotSystemControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.11.1.2
sleSlotSystemControlRequestThe request of a user commandrw
Enumeration
.1.3.6.1.4.1.6296.101.2.11.1.2.1
sleSlotSystemControlStatusThe status of user commandro
SleControlStatusType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.11.1.2.2
sleSlotSystemControlTimerThe maximum time for the manager for a long running user commandrw
Gauge32
.1.3.6.1.4.1.6296.101.2.11.1.2.3
sleSlotSystemControlTimeStampThe time stamp of the last command(end of command)ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.2.11.1.2.4
sleSlotSystemControlReqResultThe result of the last user commandro
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.11.1.2.5
sleSlotSystemControlSlotIndexThe system slot index.rw
Integer32
.1.3.6.1.4.1.6296.101.2.11.1.2.6
sleSlotSystemControlCPULoadHighThresholdThe high threshold of CPU load (70:default)rw
Integer32
.1.3.6.1.4.1.6296.101.2.11.1.2.7
sleSlotSystemControlCPULoadHighThresholdTimerThe high threshold timer of CPU load (sec) (60:default)rw
Enumeration
.1.3.6.1.4.1.6296.101.2.11.1.2.8
sleSlotSystemControlCPULoadLowThresholdThe low threshold of CPU load (30:default)rw
Integer32
.1.3.6.1.4.1.6296.101.2.11.1.2.9
sleSlotSystemControlCPULoadLowThresholdTimerThe low threshold timer of CPU load (sec) (60:default)rw
Enumeration
.1.3.6.1.4.1.6296.101.2.11.1.2.10
sleSlotSystemNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.11.1.3
sleSlotSystemRestartDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.11.1.3.1
sleSlotSystemCPULoadChagnedsetSlotCpuloadThreshold
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.11.1.3.2
sleSlotSystemCPULoadDeleteddelSlotCpuloadThreshold
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.11.1.3.3
sleSlotStatusInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.11.2
sleSlotStatusInfoTableDescription.
SEQUENCE OF SleSlotStatusInfoEntry
.1.3.6.1.4.1.6296.101.2.11.2.1
sleSlotStatusInfoEntryDescription.
SleSlotStatusInfoEntry
.1.3.6.1.4.1.6296.101.2.11.2.1.1
sleSlotStatusPlanPlanning status of slot.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.11.2.1.1.1
sleSlotStatusPlanCardTypePlanning card type status of slot.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.11.2.1.1.2
sleSlotStatusCurrentInstallCurrently installation status of slot.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.11.2.1.1.3
sleSlotStatusCurrentInstallCardTypeCurrently installation card type status of slot.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.11.2.1.1.4
sleSlotStatusCardOperationCurrently operation status of slot.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.11.2.1.1.5
sleSlotStatusLockLock status of slot.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.11.2.1.1.6
sleSlotStatusUpgradeModeUpgrade mode status of slot.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.11.2.1.1.7
sleSlotStatusActionEventEvent of slot. (accessible-for-notify)ro
Enumeration
.1.3.6.1.4.1.6296.101.2.11.2.1.1.8
sleSlotStatusStateStatus of slot. (accessible-for-notify)ro
Enumeration
.1.3.6.1.4.1.6296.101.2.11.2.1.1.9
sleSlotStatusPowerCurrently power status of slot.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.11.2.1.1.10
sleSlotStatusSerialNumberThe serial numberro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.2.1.1.11
sleSlotStatusHealthStateThe slot health statusro
Enumeration
.1.3.6.1.4.1.6296.101.2.11.2.1.1.12
sleslotStatusOverallStateThe slot overrall statusro
Enumeration
.1.3.6.1.4.1.6296.101.2.11.2.1.1.13
sleslotStatusSyncStateThe slot sync statusro
Enumeration
.1.3.6.1.4.1.6296.101.2.11.2.1.1.14
sleSlotStatusControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.11.2.2
sleSlotStatusControlRequestThe request of a user commandrw
Enumeration
.1.3.6.1.4.1.6296.101.2.11.2.2.1
sleSlotStatusControlStatusThe status of user commandro
SleControlStatusType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.11.2.2.2
sleSlotStatusControlTimerThe maximum time for the manager for a long running user commandrw
Gauge32
.1.3.6.1.4.1.6296.101.2.11.2.2.3
sleSlotStatusControlTimeStampThe time stamp of the last command(end of command)ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.2.11.2.2.4
sleSlotStatusControlReqResultThe result of the last user commandro
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.11.2.2.5
sleSlotStatusControlSlotIndexThe system slot index. 255 is means all slot.rw
Integer32
.1.3.6.1.4.1.6296.101.2.11.2.2.6
sleSlotStatusControlPlanCardTypePlanning card type status of slot.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.11.2.2.7
sleSlotStatusControlUpgradeModeUpgrade mode status of slot.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.11.2.2.8
sleSlotStatusNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.11.2.3
sleSlotStatusLockedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.11.2.3.1
sleSlotStatusUnlockedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.11.2.3.2
sleSlotStatusPlanningDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.11.2.3.3
sleSlotStatusNoPlanningDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.11.2.3.4
sleSlotStatusUpgradeModeChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.11.2.3.5
sleSlotStatusPowerUpDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.11.2.3.6
sleSlotStatusPowerDownDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.11.2.3.7
sleSlotStatusPowerResetDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.11.2.3.8
sleSlotNosInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.11.3
sleSlotNosInfoTableDescription.
SEQUENCE OF SleSlotNosInfoEntry
.1.3.6.1.4.1.6296.101.2.11.3.1
sleSlotNosInfoEntryDescription.
SleSlotNosInfoEntry
.1.3.6.1.4.1.6296.101.2.11.3.1.1
sleSlotNosVersionNOS version of slot.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.3.1.1.1
sleSlotNosRevisionNOS revision of slot.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.3.1.1.2
sleSlotNosSizeNOS size of slot.ro
Unsigned32
.1.3.6.1.4.1.6296.101.2.11.3.1.1.3
sleSlotNosUpgradeStatusNOS upgrade status of slot.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.11.3.1.1.4
sleSlotNosStbVersionStand by NOS version of slotro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.3.1.1.5
sleSlotNosStbRevisionStand by NOS revision of slot.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.3.1.1.6
sleSlotNosStbSizeStand by NOS size of slot.ro
Unsigned32
.1.3.6.1.4.1.6296.101.2.11.3.1.1.7
sleSlotNosControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.11.3.2
sleSlotNosControlRequestThe request of a user commandrw
Enumeration
.1.3.6.1.4.1.6296.101.2.11.3.2.1
sleSlotNosControlStatusThe status of user commandro
SleControlStatusType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.11.3.2.2
sleSlotNosControlTimerThe maximum time for the manager for a long running user commandrw
Gauge32
.1.3.6.1.4.1.6296.101.2.11.3.2.3
sleSlotNosControlTimeStampThe time stamp of the last command(end of command)ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.2.11.3.2.4
sleSlotNosControlReqResultThe result of the last user commandro
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.11.3.2.5
sleSlotNosControlSlotIndexThe system slot index.rw
Integer32
.1.3.6.1.4.1.6296.101.2.11.3.2.6
sleSlotNosControlUpDownMethod1: using FTP 2: using TFTPrw
Enumeration
.1.3.6.1.4.1.6296.101.2.11.3.2.7
sleSlotNosControlUpDownFlag1. Uploading slot nos to the remote-host. 2. Downloading slot nos from the remote-host.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.11.3.2.8
sleSlotNosControlServerAddressThe remote-host's IP address.rw
IpAddress
.1.3.6.1.4.1.6296.101.2.11.3.2.9
sleSlotNosControlUserIDAccount-name.rw
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.3.2.10
sleSlotNosControlPasswordAccount-password.rw
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.3.2.11
sleSlotNosControlFileNameSlot nos file name.rw
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.3.2.12
sleSlotNosNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.11.3.3
sleSlotNosUpgradeDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.11.3.3.1
sleSlotNosDownloadDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.11.3.3.2
sleSlotNosBootloaderUpgradeDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.11.3.3.3
sleSlotReleasedIUNosInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.11.4
sleSlotReleasedNIUNosVersionReleased NIU NOS image version on SFU.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.4.1
sleSlotReleasedNIUNosRevisionReleased NIU NOS image revision on SFU.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.4.2
sleSlotReleasedNIUNosSizeReleased NIU NOS image size on SFU.ro
Unsigned32
.1.3.6.1.4.1.6296.101.2.11.4.3
sleSlotReleasedGPIUNosVersionReleased GPIU NOS image version on SFU.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.4.4
sleSlotReleasedGPIUNosRevisionReleased GPIU NOS image revision on SFU.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.4.5
sleSlotReleasedGPIUNosSizeReleased GPIU NOS image size on SFU.ro
Unsigned32
.1.3.6.1.4.1.6296.101.2.11.4.6
sleSlotReleasedSIUNosVersionReleased SIU NOS image version on SFU.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.4.7
sleSlotReleasedSIUNosRevisionReleased SIU NOS image revision on SFU.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.4.8
sleSlotReleasedSIUNosSizeReleased SIU NOS image size on SFU.ro
Integer32
.1.3.6.1.4.1.6296.101.2.11.4.9
sleSlotReleasedIU10GE8NosVersionReleased IU_10GE8 NOS image version on SFU.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.4.10
sleSlotReleasedIU10GE8NosRevisionReleased IU_10GE8 NOS image revision on SFU.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.4.11
sleSlotReleasedIU10GE8NosSizeReleased IU_10GE8 NOS image size on SFU.ro
Integer32
.1.3.6.1.4.1.6296.101.2.11.4.12
sleSlotReleasedIU10GEPON8NosVersionReleased IU_10GEPON8 NOS image version on SFU.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.4.13
sleSlotReleasedIU10GEPON8NosRevisionReleased IU_10GEPON8 NOS image revision on SFU.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.4.14
sleSlotReleasedIU10GEPON8NosSizeReleased IU_10GEPON8 NOS image size on SFU.ro
Integer32
.1.3.6.1.4.1.6296.101.2.11.4.15
sleSlotReleasedIUGEPON8NosVersionReleased IU_GEPON8 NOS image version on SFU.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.4.16
sleSlotReleasedIUGEPON8NosRevisionReleased IU_GEPON8 NOS image revision on SFUro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.11.4.17
sleSlotReleasedIUGEPON8NosSizeReleased IU_GEPON8 NOS image size on SFU.ro
Integer32
.1.3.6.1.4.1.6296.101.2.11.4.18
sleSlotPowerMon
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.11.5
sleSlotPowerMonTableThe Power-Monitoring table.
SEQUENCE OF SleSlotPowerMonEntry
.1.3.6.1.4.1.6296.101.2.11.5.1
sleSlotPowerMonEntryThe Power-Monitoring entry.
SleSlotPowerMonEntry
.1.3.6.1.4.1.6296.101.2.11.5.1.1
sleSlotPowerMonIndexThe physical index of power-monitoring object.ro
INTEGER
.1.3.6.1.4.1.6296.101.2.11.5.1.1.1
sleSlotPowerMonStatusThe monitoring status of power-monitoring object.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.11.5.1.1.2
sleSlotPowerMonVoltageThe voltage value of power-monitoring object. value 10000(1000v) indicate that FUSE.ro
Gauge32 UNITS "0.1v"
.1.3.6.1.4.1.6296.101.2.11.5.1.1.3
sleSlotAiu
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.11.6
sleSlotAiuRunStatusThe slot AIU run status.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.11.6.1
sleSlotAiuAlarmStatusThe slot AIU alarm status.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.11.6.2
sleSlotProtection
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.11.7
sleSlotProtectionBase
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.11.7.1
sleSlotProtectionInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.11.7.1.1
sleSlotProtectionSystemStatusThe system admin status(enable or disable) of overtemperature shutdown function.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.11.7.1.1.1
sleSlotProtectionSystemThresholdThe system admin threshold of overtemperature shutdown function.ro
Integer32
.1.3.6.1.4.1.6296.101.2.11.7.1.1.2
sleSlotProtectionIUPowerStatusThe slot power shutdown statusrw
Enumeration
.1.3.6.1.4.1.6296.101.2.11.7.1.1.3
sleSlotProtectionControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.11.7.1.2
sleSlotProtectionControlRequestThe request of a user commandrw
Enumeration
.1.3.6.1.4.1.6296.101.2.11.7.1.2.1
sleSlotProtectionControlStatusThe status of user commandro
SleControlStatusType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.11.7.1.2.2
sleSlotProtectionControlTimerThe maximum time for the manager for a long running user commandrw
Gauge32
.1.3.6.1.4.1.6296.101.2.11.7.1.2.3
sleSlotProtectionControlTimeStampThe time stamp of the last command(end of command)ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.2.11.7.1.2.4
sleSlotProtectionControlReqResultThe result of the last user commandro
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.11.7.1.2.5
sleSlotProtectionControlSystemStatusThe system admin status(enable or disable) of overtemperature shutdown function.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.11.7.1.2.6
sleSlotProtectionControlSystemThresholdThe system admin threshold of overtemperature shutdown function.rw
Integer32
.1.3.6.1.4.1.6296.101.2.11.7.1.2.7
sleSlotProtectionControlIUPowerStatusThe slot power shutdown statusrw
Enumeration
.1.3.6.1.4.1.6296.101.2.11.7.1.2.8
sleSlotProtectionNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.11.7.1.3
sleSlotProtectionSystemStatusChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.11.7.1.3.1
sleSlotProtectionSystemThreshChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.11.7.1.3.2
sleSlotProtectionIUPowerStatusChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.11.7.1.3.3
sleSlotProtectionIU
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.11.7.2
sleSlotProtectionIUTableDescription.
SEQUENCE OF SleSlotProtectionIUEntry
.1.3.6.1.4.1.6296.101.2.11.7.2.1
sleSlotProtectionIUEntryDescription.
SleSlotProtectionIUEntry
.1.3.6.1.4.1.6296.101.2.11.7.2.1.1
sleSlotProtectionIUTemperHighThreshThe Slot temperature High-threshold of overtemperature alarmro
Integer32
.1.3.6.1.4.1.6296.101.2.11.7.2.1.1.1
sleSlotProtectionIUTemperLowThreshThe Slot temperature Low-threshold of overtemperature alarmro
Integer32
.1.3.6.1.4.1.6296.101.2.11.7.2.1.1.2
sleSlotProtectionIUPowerThreshThe Slot temperature threshold of overtemperature power shutdown.ro
Integer32
.1.3.6.1.4.1.6296.101.2.11.7.2.1.1.3
sleSlotProtectionIUTemperThe Slot temperature.ro
Integer32
.1.3.6.1.4.1.6296.101.2.11.7.2.1.1.4
sleSlotProtectionIUTemper2The Slot temperature2.ro
Integer32
.1.3.6.1.4.1.6296.101.2.11.7.2.1.1.5
sleSlotProtectionIUControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.11.7.2.2
sleSlotProtectionIUControlRequestThe request of a user commandrw
Enumeration
.1.3.6.1.4.1.6296.101.2.11.7.2.2.1
sleSlotProtectionIUControlStatusThe status of user commandro
SleControlStatusType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.11.7.2.2.2
sleSlotProtectionIUControlTimerThe maximum time for the manager for a long running user commandrw
Gauge32
.1.3.6.1.4.1.6296.101.2.11.7.2.2.3
sleSlotProtectionIUControlTimeStampThe time stamp of the last command(end of command)ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.2.11.7.2.2.4
sleSlotProtectionIUControlReqResultThe result of the last user commandro
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.11.7.2.2.5
sleSlotProtectionIUControlindexthe slot indexrw
Integer32
.1.3.6.1.4.1.6296.101.2.11.7.2.2.6
sleSlotProtectionIUControlTemperHighThreshThe Slot temperature High-threshold of overtemperature alarmrw
Integer32
.1.3.6.1.4.1.6296.101.2.11.7.2.2.7
sleSlotProtectionIUControlTemperLowThreshThe Slot temperature Low-threshold of overtemperature alarmrw
Integer32
.1.3.6.1.4.1.6296.101.2.11.7.2.2.8
sleSlotProtectionIUControlPowerThreshThe Slot temperature threshold of overtemperature power shutdown.rw
Integer32
.1.3.6.1.4.1.6296.101.2.11.7.2.2.9
sleSlotProtectionIUNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.11.7.2.3
sleSlotProtectionIUTemperThreshChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.11.7.2.3.1
sleSlotProtectionIUPowerThreshChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.11.7.2.3.2
sleRF
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.12
sleRfBaseInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.12.1
sleRfConnectStatusThe RF connect status.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.12.1.1
sleRfPowerStatusThe RF power status.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.12.1.2
sleRfEthertypeThe RF ethertype.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.12.1.3
sleRfSrcAddressThe RF source address.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.12.1.4
sleRfDesAddressThe RF destination address.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.12.1.5
sleRfBaseControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.12.2
sleRfBaseControlRequestThe request of a user command.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.12.2.1
sleRfBaseControlStatusThe status of user command.ro
SleControlStatusType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.12.2.2
sleRfBaseControlTimerThe maximum time for the manager for a long running user command.rw
Integer32
.1.3.6.1.4.1.6296.101.2.12.2.3
sleRfBaseControlTimeStampThe time stamp of the last command(end of command).ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.2.12.2.4
sleRfBaseControlReqResultThe result of user command.ro
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.12.2.5
sleRfBaseControlRfEthertypeThe Rf ethertype ,the format is 0xXXXX, default value is 0x8864.rw
OCTET STRING
.1.3.6.1.4.1.6296.101.2.12.2.6
sleRfBaseNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.12.3
sleRFBaseEthertypeChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.12.3.1
sleRFBaseEthertypeResetChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.12.3.2
sleRfPortTableDescription.
SEQUENCE OF SleRfPortEntry
.1.3.6.1.4.1.6296.101.2.12.4
sleRfPortEntryDescription.
SleRfPortEntry
.1.3.6.1.4.1.6296.101.2.12.4.1
sleRfPortIndexThe RF port index.rw
INTEGER
.1.3.6.1.4.1.6296.101.2.12.4.1.1
sleRfPortAdminStatusThe RF port adminStatus.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.12.4.1.2
sleRfPortOperStatusThe RF port operStatus.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.12.4.1.3
sleRFPortControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.12.5
sleRfPortControlRequestThe request of a user command.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.12.5.1
sleRfPortControlStatusThe status of user command.ro
SleControlStatusType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.12.5.2
sleRfPortControlTimerThe maximum time for the manager for a long running user command.rw
Integer32
.1.3.6.1.4.1.6296.101.2.12.5.3
sleRfPortControlTimeStampThe time stamp of the last command(end of command).ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.2.12.5.4
sleRfPortControlReqResultThe result of user command.ro
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.12.5.5
sleRfPortControlIndexThe RF port index <1-8>.rw
Integer32
.1.3.6.1.4.1.6296.101.2.12.5.6
sleRfPortControlAdminStatusThe RF port adminStatus.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.12.5.7
sleRFPortNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.12.6
sleRfPortStatusChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.12.6.1
sleEnvironmentMonitor
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.13
sleEMTableDescription.
SEQUENCE OF SleEMEntry
.1.3.6.1.4.1.6296.101.2.13.1
sleEMEntryDescription.
SleEMEntry
.1.3.6.1.4.1.6296.101.2.13.1.1
sleEMInputIndexThe environment monitoring input index(1-4).ro
Integer32
.1.3.6.1.4.1.6296.101.2.13.1.1.1
sleEMAlarmStringThe alarm stringro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.13.1.1.2
sleEMAlarmSeverityThe alarm severity.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.13.1.1.3
sleEMmodeThe environment monitoring mode.(default:normal-close)ro
Enumeration
.1.3.6.1.4.1.6296.101.2.13.1.1.4
sleEMControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.13.2
sleEMControlRequestThe request of a user command.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.13.2.1
sleEMControlStatusDescription.ro
SleControlStatusType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.13.2.2
sleEMControlTimerThe maximum time for the manager for a long running user command. Apply your setting.ro
Gauge32
.1.3.6.1.4.1.6296.101.2.13.2.3
sleEMControlTimeStampDescription.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.2.13.2.4
sleEMControlReqResultDescription.ro
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.13.2.5
sleEMControlInputIndexThe environment monitoring input index(1-4).rw
Integer32
.1.3.6.1.4.1.6296.101.2.13.2.6
sleEMControlAlarmStringThe alarm stringrw
OCTET STRING
.1.3.6.1.4.1.6296.101.2.13.2.7
sleEMControlAlarmSeverityThe alarm severity.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.13.2.8
sleEMControlmodeThe environment monitoring mode.(default:normal-close)rw
Enumeration
.1.3.6.1.4.1.6296.101.2.13.2.9
sleEMNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.13.3
sleEMChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.13.3.1
sleEMDeletedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.13.3.2
sleBypass
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.14
sleBypassBase
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.14.1
sleBypassBaseInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.14.1.1
sleBypassModeoptic bypass modero
Enumeration
.1.3.6.1.4.1.6296.101.2.14.1.1.1
sleBypassStatusoptic bypass statusro
Enumeration
.1.3.6.1.4.1.6296.101.2.14.1.1.2
sleBypassBaseControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.14.1.2
sleBypassBaseControlRequestDescription.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.14.1.2.1
sleBypassBaseControlStatusThe status of user command.ro
SleControlStatusType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.14.1.2.2
sleBypassBaseControlTimerThe maximum time for the manager for a long running user command.rw
Integer32
.1.3.6.1.4.1.6296.101.2.14.1.2.3
sleBypassBaseControlTimeStampThe time stamp of the last command(end of command).ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.2.14.1.2.4
sleBypassBaseControlReqResultThe result of user command.ro
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.14.1.2.5
sleBypassBaseControlModeoptic bypass moderw
Enumeration
.1.3.6.1.4.1.6296.101.2.14.1.2.6
sleBypassBaseNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.14.1.3
sleBypassModeChangedsetBypassMode(1)
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.14.1.3.1
sleBypassOption
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.14.2
sleBypassOptionConnectivityTableThe connectivity option of bypass
SEQUENCE OF SleBypassOptionConnectivityEntry
.1.3.6.1.4.1.6296.101.2.14.2.1
sleBypassOptionConnectivityEntryDescription.
SleBypassOptionConnectivityEntry
.1.3.6.1.4.1.6296.101.2.14.2.1.1
sleBypassOptionConnectivityAddressThe target IP address of bypass health-checkingro
IpAddress
.1.3.6.1.4.1.6296.101.2.14.2.1.1.1
sleBypassOptionConnectivityPortThe target port of bypass health-checking.ro
Integer32
.1.3.6.1.4.1.6296.101.2.14.2.1.1.2
sleBypassOptionConnectivityControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.14.2.2
sleBypassOptionConnectivityControlRequestsetBypassConnectivity(1) : bypass-check-option connectivity (A.B.C.D) PORT unsetBypassConnectivity(2) : no bypass-check option connectivityrw
Enumeration
.1.3.6.1.4.1.6296.101.2.14.2.2.1
sleBypassOptionConnectivityControlStatusThe status of user command.ro
SleControlStatusType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.14.2.2.2
sleBypassOptionConnectivityControlTimerThe maximum time for the manager for a long running user command.rw
Integer32
.1.3.6.1.4.1.6296.101.2.14.2.2.3
sleBypassOptionConnectivityControlTimeStampThe time stamp of the last command(end of command).ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.2.14.2.2.4
sleBypassOptionConnectivityControlReqResultThe result of user command.ro
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.14.2.2.5
sleBypassOptionConnectivityControlAddressThe target IP address of bypass health-checkingrw
IpAddress
.1.3.6.1.4.1.6296.101.2.14.2.2.6
sleBypassOptionConnectivityControlPorthe target port of bypass health-checkingrw
Integer32
.1.3.6.1.4.1.6296.101.2.14.2.2.7
sleBypassOptionConnectivityNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.14.2.3
sleBypassOptionConnectivitySetDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.14.2.3.1
sleBypassOptionConnectivityUnsetDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.14.2.3.2
sleBypassOptionPingTableDescription.
SEQUENCE OF SleBypassOptionPingEntry
.1.3.6.1.4.1.6296.101.2.14.2.4
sleBypassOptionPingEntryDescription.
SleBypassOptionPingEntry
.1.3.6.1.4.1.6296.101.2.14.2.4.1
sleBypassOptionPingAddressThe target IP address of bypass ping health checkingro
IpAddress
.1.3.6.1.4.1.6296.101.2.14.2.4.1.1
sleBypassOptionPingTransIntervalThe ping transaction intervalro
Integer32
.1.3.6.1.4.1.6296.101.2.14.2.4.1.2
sleBypassOptionPingTranNumberThe ping transaction request numberro
Integer32
.1.3.6.1.4.1.6296.101.2.14.2.4.1.3
sleBypassOptionPingReqIntervalThe ping request intervalro
Integer32
.1.3.6.1.4.1.6296.101.2.14.2.4.1.4
sleBypassOptionPingReqTimeoutThe ping request timeoutro
Integer32
.1.3.6.1.4.1.6296.101.2.14.2.4.1.5
sleBypassOptionPingLossThreshThe ping loss thresholdro
Integer32
.1.3.6.1.4.1.6296.101.2.14.2.4.1.6
sleBypassOptionPingControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.14.2.5
sleBypassOptionPingControlRequestThe request of a user command.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.14.2.5.1
sleBypassOptionPingControlStatusThe status of user command.ro
SleControlStatusType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.14.2.5.2
sleBypassOptionPingControlTimerThe maximum time for the manager for a long running user command.rw
Integer32
.1.3.6.1.4.1.6296.101.2.14.2.5.3
sleBypassOptionPingControlTimeStampThe time stamp of the last command(end of command).ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.2.14.2.5.4
sleBypassOptionPingControlReqResultThe result of user command.ro
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.14.2.5.5
sleBypassOptionPingControlAddressThe target IP address of bypass ping health-checkingrw
IpAddress
.1.3.6.1.4.1.6296.101.2.14.2.5.6
sleBypassOptionPingControlTransIntervalThe ping transaction intervalrw
Integer32
.1.3.6.1.4.1.6296.101.2.14.2.5.7
sleBypassOptionPingControlTranNumberThe ping transaction request numberrw
Integer32
.1.3.6.1.4.1.6296.101.2.14.2.5.8
sleBypassOptionPingControlReqIntervalThe ping request intervalrw
Integer32
.1.3.6.1.4.1.6296.101.2.14.2.5.9
sleBypassOptionPingControlReqTimeoutThe ping request timeoutrw
Integer32
.1.3.6.1.4.1.6296.101.2.14.2.5.10
sleBypassOptionPingControlLossThreshThe ping loss thresholdrw
Integer32
.1.3.6.1.4.1.6296.101.2.14.2.5.11
sleBypassOptionPingNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.14.2.6
sleBypassOptionPingSetDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.14.2.6.1
sleBypassOptionPingUnsetDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.14.2.6.2
sleBypassOptionLinkMonitorTableDescription.
SEQUENCE OF SleBypassOptionLinkMonitorEntry
.1.3.6.1.4.1.6296.101.2.14.2.7
sleBypassOptionLinkMonitorEntryDescription.
SleBypassOptionLinkMonitorEntry
.1.3.6.1.4.1.6296.101.2.14.2.7.1
sleBypassOptionLinkMonitorPortThe port of bypass link health-checkingro
Integer32
.1.3.6.1.4.1.6296.101.2.14.2.7.1.1
sleBypassOptionLinkMonitorPortStatusThe port status of bypass link health-checkingro
Enumeration
.1.3.6.1.4.1.6296.101.2.14.2.7.1.2
sleBypassOptionLinkMonitorControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.14.2.8
sleBypassOptionLinkMonitorControlRequestThe request of a user command.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.14.2.8.1
sleBypassOptionLinkMonitorControlStatusThe status of user command.ro
SleControlStatusType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.14.2.8.2
sleBypassOptionLinkMonitorControlTimerThe maximum time for the manager for a long running user command.rw
Integer32
.1.3.6.1.4.1.6296.101.2.14.2.8.3
sleBypassOptionLinkMonitorControlTimeStampThe time stamp of the last command(end of command).ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.2.14.2.8.4
sleBypassOptionLinkMonitorControlReqResultThe result of user command.ro
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.14.2.8.5
sleBypassOptionLinkMonitorControlPortThe port of bypass link health-checkingrw
Integer32
.1.3.6.1.4.1.6296.101.2.14.2.8.6
sleBypassOptionLinkMonitorControlPortStatusThe port status of bypass link health-checkingrw
Enumeration
.1.3.6.1.4.1.6296.101.2.14.2.8.7
sleBypassOptioLinkMonitorNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.14.2.9
sleBypassOptionLinkMonitorChangedDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.14.2.9.1
sleHFC
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.15
sleHFCTableDescription.
SEQUENCE OF SleHFCEntry
.1.3.6.1.4.1.6296.101.2.15.1
sleHFCEntryDescription.
SleHFCEntry
.1.3.6.1.4.1.6296.101.2.15.1.1
sleHFCOptic1550OTXHFC Optic 1550 OTX value.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.15.1.1.1
sleHFCOptic1550OTXAlarmHFC Optic 1550 OTX alarm status.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.15.1.1.2
sleHFCOpticUpstreamOTXHFC Optic Upstream OTX value.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.15.1.1.3
sleHFCOpticUpstreamOTXAlarmHFC Optic Upstream OTX alarm status.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.15.1.1.4
sleHFCOpticDownstreamORXHFC Optic Downstream ORX value.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.15.1.1.5
sleHFCOpticDownstreamORXAlarmHFC Optic Downstream ORX alarm status.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.15.1.1.6
sleHFCEDFA1OTXHFC EDFA1 OTX value.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.15.1.1.7
sleHFCEDFA1OTXAlarmHFC EDFA1 OTX alarm status.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.15.1.1.8
sleHFCEDFA1ORXHFC EDFA1 ORX value.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.15.1.1.9
sleHFCEDFA1ORXAlarmHFC EDFA1 ORX alarm status.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.15.1.1.10
sleHFCEDFA1LD1CurrentHFC EDFA1 LD1 Current value.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.15.1.1.11
sleHFCEDFA1LD1CurrentAlarmHFC EDFA1 LD1 Current alarm status.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.15.1.1.12
sleHFCEDFA1LD2CurrentHFC EDFA1 LD2 Current value.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.15.1.1.13
sleHFCEDFA1LD2CurrentAlarmHFC EDFA1 LD2 Current alarm status.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.15.1.1.14
sleHFCEDFA1LD1TempHFC EDFA1 LD1 Temp value.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.15.1.1.15
sleHFCEDFA1LD1TempAlarmHFC EDFA1 LD1 Temp alarm status.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.15.1.1.16
sleHFCEDFA1LD2TempHFC EDFA1 LD2 Temp value.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.15.1.1.17
sleHFCEDFA1LD2TempAlarmHFC EDFA1 LD2 Temp alarm status.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.15.1.1.18
sleHFCEDFA1CaseTempHFC EDFA1 Case Temp value.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.15.1.1.19
sleHFCEDFA1CaseTempAlarmHFC EDFA1 Case Temp alarm status.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.15.1.1.20
sleHFCEDFA2OTXHFC EDFA2 OTX value.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.15.1.1.21
sleHFCEDFA2OTXAarmHFC EDFA2 OTX alarm status.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.15.1.1.22
sleHFCEDFA2ORXHFC EDFA2 ORX value.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.15.1.1.23
sleHFCEDFA2ORXAlarmHFC EDFA2 ORX alarm status.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.15.1.1.24
sleHFCEDFA2LD1CurrentHFC EDFA2 LD1 Current value.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.15.1.1.25
sleHFCEDFA2LD1CurrentAlarmHFC EDFA2 LD1 Current alarm status.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.15.1.1.26
sleHFCEDFA2LD2CurrentHFC EDFA2 LD2 Current value.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.15.1.1.27
sleHFCEDFA2LD2CurrentAlarmHFC EDFA2 LD2 Current alarm status.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.15.1.1.28
sleHFCEDFA2LD1TempHFC EDFA2 LD1 Temp value.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.15.1.1.29
sleHFCEDFA2LD1TempAlarmHFC EDFA2 LD1 Temp alarm status.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.15.1.1.30
sleHFCEDFA2LD2TempHFC EDFA2 LD2 Temp value.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.15.1.1.31
sleHFCEDFA2LD2TempAlarmHFC EDFA2 LD2 Temp alarm status.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.15.1.1.32
sleHFCEDFA2CaseTempHFC EDFA2 Case Temp value.ro
OCTET STRING
.1.3.6.1.4.1.6296.101.2.15.1.1.33
sleHFCEDFA2CaseTempAlarmHFC EDFA2 Case Temp alarm status.ro
Enumeration
.1.3.6.1.4.1.6296.101.2.15.1.1.34
sleHFCControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.15.2
sleHFCControlRequestThe request of a user commandrw
Enumeration
.1.3.6.1.4.1.6296.101.2.15.2.1
sleHFCControlStatusThe status of user commandro
SleControlStatusType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.15.2.2
sleHFCControlTimerThe maximum time for the manager for a long running user command.rw
Gauge32
.1.3.6.1.4.1.6296.101.2.15.2.3
sleHFCControlTimeStampThe time stamp of the last command(end of command)ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.6296.101.2.15.2.4
sleHFCControlReqResultThe result of the last user commandro
SleControlRequestResultType (SLE-TC-MIB)
.1.3.6.1.4.1.6296.101.2.15.2.5
sleHFCControlAlarmIndexThe HFC alarm index , edfa1 /edfa2 /optic .rw
Enumeration
.1.3.6.1.4.1.6296.101.2.15.2.6
sleHFCControlAlarmStatusThe HFC alrm status.rw
Enumeration
.1.3.6.1.4.1.6296.101.2.15.2.7
sleHFCNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.6296.101.2.15.3
sleHFCOpticAlarmStatusChangedHFC Alarm Status Changed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6296.101.2.15.3.1
sleDeviceGroupDescription.
Unknown
.1.3.6.1.4.1.6296.101.2.16
sleDeviceNotificationGroupDescription.
Unknown
.1.3.6.1.4.1.6296.101.2.17