SHIVA-LINE-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for SHIVA-LINE-MIB.
32
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
32 total| Object Name |
|---|
RFC1213-MIBTable of serial line initialization parameters and status. SEQUENCE OF SerialLineEntry .1.3.6.1.4.1.166.1.17.1 |
linegroupTableA table of serial line groups. On a LanRover Access
Switch this is a table of outgoing PhoneGroup pools. SEQUENCE OF LinegroupEntry .1.3.6.1.4.1.166.1.17.2 |
linegroupEntryA serial line group name table entry. On a LanRover
Access Switch an outgoing PhoneGroup pool table
entry. LinegroupEntry .1.3.6.1.4.1.166.1.17.2.1 |
linegroupNameA serial line group name. On a LanRover Access
Switch this is an outgoing PhoneGroup pool name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.166.1.17.2.1.1 |
linegroupDialoutProtsBitmask of dialout protocols enabled for group:
0x00000001 - IP
0x00000002 - IPX
0x00000004 - AppleTalk.ro INTEGER .1.3.6.1.4.1.166.1.17.2.1.2 |
serialLineEntryinitialization parameters and status for a serial line. SerialLineEntry .serialLineTable.1 |
serialLineIndexSerial line number, densely numbered starting with 1.ro INTEGER .serialLineTable.1.1 |
serialLineSlotPhysical slot number, starting with 1. Skips empty slots.ro INTEGER .serialLineTable.1.2 |
serialLineChanLogical channel number on physical slot. BRI cards have
two channels, all others have one.ro INTEGER .serialLineTable.1.3 |
serialLineLogIndexLogical line number, the number used in the device
name (ifDesc) SerialN. Skips over empty slots.ro INTEGER .serialLineTable.1.4 |
serialLinePoolsThe names of the pools that this line is in, comma-seperated.ro DisplayString (SNMPv2-TC) .serialLineTable.1.5 |
serialLineStatusSerial line status. Setting serialLineStatus
to initializing(2) forces the line to be reinitialized.rw Enumeration .serialLineTable.1.6 |
serialLineModemNameThe name of the type of modem connected to this line.rw DisplayString (SNMPv2-TC) .serialLineTable.1.7 |
serialLineAnswerInitThe initialization string to put the modem in auto-answer
mode.rw DisplayString (SNMPv2-TC) .serialLineTable.1.8 |
serialLineInitRateThe rate in bits per second at which to initialize
the line.rw INTEGER .serialLineTable.1.9 |
serialLineInitFlowThe flow control setting to initialize the line with.rw Enumeration .serialLineTable.1.10 |
serialLineSignalsThe current status of control signals on this line,
as the sum of the following bits;
0 Ready To Send
1 Clear To Send
2 Data Set Ready
3 Data Terminal Ready
4 Ring Indicate
5 Data Carrier (Rcvd Line Signal) Detect
6 Signal Quality Detect
7 Signaling Rate Selector
8 Secondary RTS
9 Secondary CTS
10 Secondary DCD.ro INTEGER .serialLineTable.1.11 |
serialLineModeThe tranmission mode currently in use on this line.ro Enumeration .serialLineTable.1.12 |
serialLineInitStringThe initialization string to put the modem in dial
mode.rw DisplayString (SNMPv2-TC) .serialLineTable.1.13 |
serialLineConnSpeedLine connection speed.ro INTEGER .serialLineTable.1.14 |
serialLineSwitchISDN switch type configured on this line.ro Enumeration .serialLineTable.1.15 |
serialLineRadapISDN rate adaptation type.ro Enumeration .serialLineTable.1.16 |
serialLineTransCapType of ISDN service on this linero Enumeration .serialLineTable.1.17 |
serialLineSpidISDN Service Profile ID.ro DisplayString (SNMPv2-TC) .serialLineTable.1.18 |
serialLineErrorCorrerror correction protocol on this line.ro Enumeration .serialLineTable.1.19 |
serialLineDataComprline data compression type.ro Enumeration .serialLineTable.1.20 |
serialLineEQMline signal quality.ro INTEGER .serialLineTable.1.21 |
serialLineAGCline signal strength.ro INTEGER .serialLineTable.1.22 |
serialLineStatTabStatistics table that pertains to this line.ro Enumeration .serialLineTable.1.23 |
serialLineStatIndexIndex into statistics table.ro INTEGER .serialLineTable.1.24 |
serialLineTypeType of line.ro Enumeration .serialLineTable.1.25 |
serialLineIfIndexThe ifIndex of this serial line.ro INTEGER .serialLineTable.1.26 |