SEH-PSRV-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for SEH-PSRV-MIB.
687
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
687 total| Object Name |
|---|
seh OBJECT IDENTIFIER .1.3.6.1.4.1.1229 |
RFC1155-SMI Unknown .1.3.6.1.4.1.1229 |
prtFaultThe printer error state has changed. TRAP-TYPE .1.3.6.1.4.1.1229.0.1 |
sehDevice OBJECT IDENTIFIER .1.3.6.1.4.1.1229.1 |
sehDevInfoThis parameter specifies a full device description.rw DisplayString .1.3.6.1.4.1.1229.1.1 |
sehPSrv OBJECT IDENTIFIER .1.3.6.1.4.1.1229.2 |
sehGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.1229.2.1 |
sehSysInfoThis parameter specifies information about
the print server.ro DisplayString .1.3.6.1.4.1.1229.2.1.1 |
sehDefNameThis parameter specifies the default name
of the SEH print server.ro DisplayString .1.3.6.1.4.1.1229.2.1.2 |
sehPhysAddrThis parameter specifies the hardware address
of the SEH print server.ro PhysAddress .1.3.6.1.4.1.1229.2.1.3 |
sehHwPnThis parameter specifies the hardware project number
of the SEH print server.ro INTEGER .1.3.6.1.4.1.1229.2.1.4 |
sehBiosIdThis parameter specifies the BIOS identity
of the SEH print server.ro Enumeration .1.3.6.1.4.1.1229.2.1.5 |
sehBiosVerThis parameter specifies the BIOS version
of the SEH print server.ro INTEGER .1.3.6.1.4.1.1229.2.1.6 |
sehCmpIdThis parameter specifies the compatibility identity
of the SEH print server.ro Enumeration .1.3.6.1.4.1.1229.2.1.7 |
sehCmplevelThis parameter specifies the compatibility level
of the SEH print server.ro INTEGER .1.3.6.1.4.1.1229.2.1.8 |
sehSerNumThis parameter specifies the serial number
of the SEH print server.ro INTEGER .1.3.6.1.4.1.1229.2.1.9 |
sehPrdYearThis parameter specifies the
production year.ro INTEGER .1.3.6.1.4.1.1229.2.1.10 |
sehPrdMonthThis parameter specifies the
production month.ro INTEGER .1.3.6.1.4.1.1229.2.1.11 |
sehSwVerThis parameter specifies the number of the software
version of the SEH print server.ro INTEGER .1.3.6.1.4.1.1229.2.1.12 |
sehSwRelThis parameter specifies the software release number
of the SEH print server.ro INTEGER .1.3.6.1.4.1.1229.2.1.13 |
sehSwSubThis parameter specifies the software subrelease number
of the SEH print server.ro INTEGER .1.3.6.1.4.1.1229.2.1.14 |
sehSpModeThis parameter specifies the status page format.rw Enumeration .1.3.6.1.4.1.1229.2.1.15 |
sehHwMajorThis parameter specifies the major hardware revision
number of the SEH print server.ro INTEGER .1.3.6.1.4.1.1229.2.1.16 |
sehHwMinorThis parameter specifies the minor hardware revision
number of the SEH print server.ro INTEGER .1.3.6.1.4.1.1229.2.1.17 |
sehPasswordThis parameter specifies the password of the print server.
If set the password must be used as SNMP community
for write access.rw DisplayString .1.3.6.1.4.1.1229.2.1.18 |
sehAccessControlThis parameter enables or disables the access to the print
server parameters. If a password is assigned and access control
is enabled, the parameters are read-protected.rw Enumeration .1.3.6.1.4.1.1229.2.1.19 |
sehDealerThis parameter specifies a string containing e.g. the name
of the printer dealer.rw DisplayString .1.3.6.1.4.1.1229.2.1.20 |
sehDealerURLThis parameter specifies a string containing e.g. the URL
of the printer dealer.rw DisplayString .1.3.6.1.4.1.1229.2.1.21 |
sehLocalisationThis parameter specifies the country code.rw DisplayString .1.3.6.1.4.1.1229.2.1.22 |
sehHpJetAdminCompatibilityThis parameter enables/disables the HP JetAdmin compatibility mode.rw Enumeration .1.3.6.1.4.1.1229.2.1.23 |
sehEnpcSupportThis parameter enables/disables ENPC support on parallel interfaces.rw Enumeration .1.3.6.1.4.1.1229.2.1.24 |
sehAdminGroupThis parameter specifies the workgroup for the admin tool.rw DisplayString .1.3.6.1.4.1.1229.2.1.25 |
sehUpdateStateThis parameter specifies if a software update
is running or has been failed.ro Enumeration .1.3.6.1.4.1.1229.2.1.26 |
sehJobRecvTimeoutThis parameter specifies the receive timeout (in seconds)
for TCP based print jobs. A print job will be aborted
if there are no data received for the specified time.rw INTEGER .1.3.6.1.4.1.1229.2.1.27 |
sehThinPrintPortThis parameter specifies the ThinPrint port number.rw INTEGER .1.3.6.1.4.1.1229.2.1.29 |
sehHpHttpDaemonThis parameter enables/disables an HTTP daemon on HP printers.rw Enumeration .1.3.6.1.4.1.1229.2.1.30 |
sehBaseLineThis parameter specifies if the device is
an SEH Baseline device with reduced functionality.ro Enumeration .1.3.6.1.4.1.1229.2.1.31 |
sehEthernetConfigThis parameter sets the configuration of the ethernet link.rw Enumeration .1.3.6.1.4.1.1229.2.1.32 |
sehSwIdThis parameter specifies the software id of the SEH print server.ro Enumeration .1.3.6.1.4.1.1229.2.1.33 |
sehNetworkTypeThis parameter specifies the product network type.ro Enumeration .1.3.6.1.4.1.1229.2.1.34 |
sehUtnPortThis parameter specifies the UTN port number.rw INTEGER .1.3.6.1.4.1.1229.2.1.35 |
sehZebraPortThis parameter specifies the Zebra UDP port number.rw INTEGER .1.3.6.1.4.1.1229.2.1.36 |
sehServiceInfoThis parameter returns the service-information string.ro DisplayString .1.3.6.1.4.1.1229.2.1.37 |
sehButtonPressedThis parameter returns the count of pushes of the button.ro INTEGER .1.3.6.1.4.1.1229.2.1.40 |
sehUtnSSLPortThis parameter specifies the UTN SSL port number.rw INTEGER .1.3.6.1.4.1.1229.2.1.45 |
sehUtnCiphertThis parameter specifies the UTN protocol encryption.rw Enumeration .1.3.6.1.4.1.1229.2.1.46 |
sehSwFeaturesThis parameter contains a bitfield of software internal features.ro INTEGER .1.3.6.1.4.1.1229.2.1.50 |
sehPprinter OBJECT IDENTIFIER .1.3.6.1.4.1.1229.2.2 |
pprtNumberThis parameter specifies the number of available printer
ports/physical printers (regardless of their current state).ro INTEGER .1.3.6.1.4.1.1229.2.2.1 |
pprtTableThis object specifies a table containing a list of printer
port/physical printer entries. The number of
entries is given by the value of pprtNumber. SEQUENCE OF PPrtEntryType .1.3.6.1.4.1.1229.2.2.2 |
pprtEntryParameters regarding to physical printers PPrtEntryType .1.3.6.1.4.1.1229.2.2.2.1 |
pprtIndexThis object contains the index of the table being a unique
value for each physical port/physical printer. Its value
ranges between 1 and the value of pprtNumber.ro INTEGER .1.3.6.1.4.1.1229.2.2.2.1.1 |
pprtErrorThis parameter specifies the printer errors.
BITS MEANING
2^0 paper jam
2^1 paper empty
2^2 toner low
2^3 cover open
2^4 toner empty
2^5 cassette not ready
2^6 warming up
2^7 offline
2^8 engine error
2^9 no select
2^14 service call
2^15 misc errorro INTEGER .1.3.6.1.4.1.1229.2.2.2.1.2 |
pprtTypeThis parameter specifies the type of the interface of the printer.ro Enumeration .1.3.6.1.4.1.1229.2.2.2.1.3 |
pprtEcpThis parameter enables the ECP mode for Pocket print servers.
It is only available for pprtType = parallel(0).rw Enumeration .1.3.6.1.4.1.1229.2.2.2.1.4 |
pprtPanelThis parameter enables the configuration via printer operating panel.
It is only available for pprtType = kyocera(2).rw Enumeration .1.3.6.1.4.1.1229.2.2.2.1.5 |
pprtMailNotification1This parameter enables or disables the e-mail
notification for recipient 1.rw Enumeration .1.3.6.1.4.1.1229.2.2.2.1.7 |
pprtMailAddress1This parameter specifies the IP address of the e-mail recipient 1.rw DisplayString .1.3.6.1.4.1.1229.2.2.2.1.8 |
pprtMailServer1This parameter specifies the mail server for the e-mail
notification of recipient 1.rw IpAddress .1.3.6.1.4.1.1229.2.2.2.1.9 |
pprtMailMask1This parameter specifies the mail mask bits of the e-mail
notification for recipient 1.
BITS MEANING
2^0 paper jam
2^1 paper empty
2^2 toner low
2^3 cover open
2^4 toner empty
2^5 cassette not ready
2^6 warming up
2^7 offline
2^8 engine error
2^9 noselect
2^10 paper low
2^14 service call
2^15 misc errorrw INTEGER .1.3.6.1.4.1.1229.2.2.2.1.10 |
pprtMailNotification2This parameter enables or disables the e-mail
notification for recipient 2.rw Enumeration .1.3.6.1.4.1.1229.2.2.2.1.11 |
pprtMailAddress2This parameter specifies the IP-address of the e-mail recipient 2.rw DisplayString .1.3.6.1.4.1.1229.2.2.2.1.12 |
pprtMailServer2This parameter specifies the mail server for the e-mail
notification of recipient 2.rw IpAddress .1.3.6.1.4.1.1229.2.2.2.1.13 |
pprtMailMask2This parameter specifies the mail mask bits of the e-mail
notification for recipient 2.
BITS MEANING
2^0 paper jam
2^1 paper empty
2^2 toner low
2^3 cover open
2^4 toner empty
2^5 cassette not ready
2^6 warming up
2^7 offline
2^8 engine error
2^9 no select
2^14 service call
2^15 misc errorrw INTEGER .1.3.6.1.4.1.1229.2.2.2.1.14 |
pprtModelThis parameter specifies the printer model.ro DisplayString .1.3.6.1.4.1.1229.2.2.2.1.15 |
pprtManufacturerThis parameter specifies the printer manufacturer.ro DisplayString .1.3.6.1.4.1.1229.2.2.2.1.16 |
pprtEmulationsThis parameter contains the printer emulations.ro DisplayString .1.3.6.1.4.1.1229.2.2.2.1.17 |
pprtFastThis parameter enables the fast compatible mode for
print servers with pprtType = parallel(0).rw Enumeration .1.3.6.1.4.1.1229.2.2.2.1.18 |
pprtBaudrateThis parameter specifies the baud rate
for ports with pprtType = serial(1).rw INTEGER .1.3.6.1.4.1.1229.2.2.2.1.19 |
pprtParityThis parameter specifies the parity
for ports with pprtType = serial(1).
It may take the values none, even or odd.rw DisplayString .1.3.6.1.4.1.1229.2.2.2.1.20 |
pprtDatabitsThis parameter specifies the number of data bits
for ports with pprtType = serial(1).rw INTEGER .1.3.6.1.4.1.1229.2.2.2.1.21 |
pprtStopbitsThis parameter specifies the number of stop bits
for ports with pprtType = serial(1).rw INTEGER .1.3.6.1.4.1.1229.2.2.2.1.22 |
pprtFlowControlThis parameter specifies the flow control
for ports with pprtType = serial(1).
It may take the values none, xon, dsr or both.rw DisplayString .1.3.6.1.4.1.1229.2.2.2.1.23 |
pprtDeviceIDThis parameter contains the printer device id.ro DisplayString .1.3.6.1.4.1.1229.2.2.2.1.24 |
pprtDot4On print servers with external interfaces
this parameter enables the IEEE 1284.4 protocol
resp. the (similar) MLC protocol.rw Enumeration .1.3.6.1.4.1.1229.2.2.2.1.25 |
pprtPortModeThis parameter specifies how to handle the communication
at the printer port. Beside uni and bidirectional there are
modes for manufactor specific GDI printer.rw Enumeration .1.3.6.1.4.1.1229.2.2.2.1.26 |
pprtPjlOn print servers with external interfaces
this parameter enables the PJL (Printer Job Language) protocol.rw Enumeration .1.3.6.1.4.1.1229.2.2.2.1.27 |
pprtDynUpdateThis parameter switches the printer dynamic update on or off.rw Enumeration .1.3.6.1.4.1.1229.2.2.10 |
pprtDynUpdateUrlThis parameter specifies the printer firmware update ftp url.rw DisplayString .1.3.6.1.4.1.1229.2.2.11 |
pprtDynUpdateUsrThis parameter specifies the printer firmware update ftp user.rw DisplayString .1.3.6.1.4.1.1229.2.2.12 |
pprtDynUpdatePwdThis parameter specifies the printer firmware update ftp password.rw DisplayString .1.3.6.1.4.1.1229.2.2.13 |
pprtDynStatusPathThis parameter specifies the printer status path and file name.rw DisplayString .1.3.6.1.4.1.1229.2.2.14 |
pprtDynUpdateHourThis parameter defines the hour for the daily printer firmware update.
24 means the daily update is disabled.
The update is randomly delayed between 0 und 15 minutes to avoid traffic bursts.rw INTEGER .1.3.6.1.4.1.1229.2.2.20 |
pprtDynReportMinThis parameter defines the minutes between the ftp committed printer status reports.
0 means only report once after start.rw INTEGER .1.3.6.1.4.1.1229.2.2.21 |
sehLprinter OBJECT IDENTIFIER .1.3.6.1.4.1.1229.2.3 |
lprtNumberThis parameter specifies the number of available logical
printers (regardless of their current state).ro INTEGER .1.3.6.1.4.1.1229.2.3.1 |
lprtTableThis object specifies a table containing a list of logical printer
entries. The number of entries is given by the value of lprtNumber. SEQUENCE OF LPrtEntry .1.3.6.1.4.1.1229.2.3.2 |
lprtEntryParameters regarding to logical printers. LPrtEntry .1.3.6.1.4.1.1229.2.3.2.1 |
lprtIndexThis object contains the index of the table being a
unique value for each logical printer. Its value
ranges between 1 and the value of lprtNumber.ro INTEGER .1.3.6.1.4.1.1229.2.3.2.1.1 |
lprtStartThis parameter specifies the start sequence
of a logical printer.rw DisplayString .1.3.6.1.4.1.1229.2.3.2.1.2 |
lprtEndThis parameter specifies the end sequence
of a logical printer.rw DisplayString .1.3.6.1.4.1.1229.2.3.2.1.3 |
lprtPhyPrtThis parameter assigns a physical port to a logical
printer. It is only available for pprtNumber > 1.rw Enumeration .1.3.6.1.4.1.1229.2.3.2.1.4 |
lprtTCPPortThis parameter specifies the TCP/IP port of the logical printer.rw INTEGER .1.3.6.1.4.1.1229.2.3.2.1.5 |
lprtCRLFIf this parameter is enabled, LF is converted to CR+LF.rw Enumeration .1.3.6.1.4.1.1229.2.3.2.1.6 |
lprtHexDpThis parameter enables or disables the hex dump mode.rw Enumeration .1.3.6.1.4.1.1229.2.3.2.1.7 |
lprtBpIf this parameter is enabled a banner page is printed.rw Enumeration .1.3.6.1.4.1.1229.2.3.2.1.8 |
lprtAsPsThis parameter converts ASCII to PostScript.rw Enumeration .1.3.6.1.4.1.1229.2.3.2.1.9 |
lprtModeThis parameter specifies the format of the banner page.rw Enumeration .1.3.6.1.4.1.1229.2.3.2.1.10 |
lprtRsoSpoolThis parameter uses the RSO spooler on TCP socket connections.rw Enumeration .1.3.6.1.4.1.1229.2.3.2.1.11 |
lprtSearchLogical printer search string for search and replace.rw DisplayString .1.3.6.1.4.1.1229.2.3.2.1.13 |
lprtReplaceLogical printer replace string for search and replace.rw DisplayString .1.3.6.1.4.1.1229.2.3.2.1.14 |
lprtBinaryPSThis parameter enables support for binary PostScript data
on TCP socket connections.rw Enumeration .1.3.6.1.4.1.1229.2.3.2.1.15 |
sehIp OBJECT IDENTIFIER .1.3.6.1.4.1.1229.2.4 |
ipIpAddrThis parameter specifies the IP address of the print server.rw IpAddress .1.3.6.1.4.1.1229.2.4.1 |
ipNetMaskThis parameter specifies the subnet mask.rw IpAddress .1.3.6.1.4.1.1229.2.4.2 |
ipDefGateThis parameter specifies the IP address of the default gateway.rw IpAddress .1.3.6.1.4.1.1229.2.4.3 |
ipBOOTPThis parameter enables the BOOTP protocol.rw Enumeration .1.3.6.1.4.1.1229.2.4.4 |
ipRARPThis parameter enables the RARP protocol.rw Enumeration .1.3.6.1.4.1.1229.2.4.5 |
ipAutoconfThis parameter enables ARP/PING to
save the IP address in the print server.rw Enumeration .1.3.6.1.4.1.1229.2.4.6 |
ipDHCPThis parameter enables the DHCP protocol.rw Enumeration .1.3.6.1.4.1.1229.2.4.7 |
ipZeroConfThis parameter enables the ZeroConfig protocol.rw Enumeration .1.3.6.1.4.1.1229.2.4.8 |
ipSetByThis parameter informs who has set the current ip addressro Enumeration .1.3.6.1.4.1.1229.2.4.9 |
ipWinsPrimarySrvThis parameter specifies the IP address of the primary WINS server.rw IpAddress .1.3.6.1.4.1.1229.2.4.10 |
ipWinsSecondarySrvThis parameter specifies the IP address of the secondary WINS server.rw IpAddress .1.3.6.1.4.1.1229.2.4.11 |
ipTCPThis parameter enables or disables TCP/IP.rw Enumeration .1.3.6.1.4.1.1229.2.4.12 |
ipDNSThis parameter enables the DNS name resolution.rw Enumeration .1.3.6.1.4.1.1229.2.4.13 |
ipDomainNameThis parameter specifies the domain name.rw DisplayString .1.3.6.1.4.1.1229.2.4.14 |
ipDnsPrimarySrvThis parameter specifies the IP address of the primary DNS server.rw IpAddress .1.3.6.1.4.1.1229.2.4.15 |
ipDnsSecondarySrvThis parameter specifies the IP address of the secondary DNS server.rw IpAddress .1.3.6.1.4.1.1229.2.4.16 |
ipSenderNumberNumber of IP senderro INTEGER .1.3.6.1.4.1.1229.2.4.17 |
ipSenderTableTable of Ip senders SEQUENCE OF IpSenderEntry .1.3.6.1.4.1.1229.2.4.18 |
ipSenderEntryEntry of IP sender table IpSenderEntry .1.3.6.1.4.1.1229.2.4.18.1 |
ipSenderIndexIndex of IP sender table.ro INTEGER .1.3.6.1.4.1.1229.2.4.18.1.1 |
ipSenderIP sender.rw DisplayString .1.3.6.1.4.1.1229.2.4.18.1.2 |
ipAutoGateThis parameter enables the use of a multicast router
as the default gateway.rw Enumeration .1.3.6.1.4.1.1229.2.4.19 |
ipZeroConfigThis parameter enables the ZeroConfig protocol.
Identical to sehIp 8 for compatibility reasons.rw Enumeration .1.3.6.1.4.1.1229.2.4.20 |
ipHTTPThis parameter enables the HTTP daemon.rw Enumeration .1.3.6.1.4.1.1229.2.4.21 |
ipIPv6This parameter enables the IPv6 protocol.rw Enumeration .1.3.6.1.4.1.1229.2.4.22 |
ipIPv6AddrThis parameter set manual a IPv6-Address.rw DisplayString .1.3.6.1.4.1.1229.2.4.23 |
ipIPv6PlenThis parameter set IPv6 prefix length.rw INTEGER .1.3.6.1.4.1.1229.2.4.24 |
ipIPv6GateThis parameter set manual a IPv6-Route.rw DisplayString .1.3.6.1.4.1.1229.2.4.25 |
ipIPv6AutoThis parameter enables or disables the IPv6 Automatic configuration.rw Enumeration .1.3.6.1.4.1.1229.2.4.26 |
ipFTPThis parameter enables or disables the FPT daemon.rw Enumeration .1.3.6.1.4.1.1229.2.4.30 |
sehNovell OBJECT IDENTIFIER .1.3.6.1.4.1.1229.2.5 |
nwNameThis parameter specifies the Novell name
of the SEH print server.rw DisplayString .1.3.6.1.4.1.1229.2.5.1 |
nwNDSThis parameter enables or disables the support
for the Netware Directory Services.rw Enumeration .1.3.6.1.4.1.1229.2.5.2 |
nwBinderyThis parameter enables or disables the support
for the Netware Bindery Services.rw Enumeration .1.3.6.1.4.1.1229.2.5.3 |
nw8022This parameter enables or disables the
frame header ETHERNET_802.2.rw Enumeration .1.3.6.1.4.1.1229.2.5.4 |
nw8023This parameter enables or disables the
frame header ETHERNET_802.3.rw Enumeration .1.3.6.1.4.1.1229.2.5.5 |
nwEthIIThis parameter enables or disables the
frame header ETHERNET_II.rw Enumeration .1.3.6.1.4.1.1229.2.5.6 |
nwSNAPThis parameter enables or disables the
frame header ETHERNET_SNAP.rw Enumeration .1.3.6.1.4.1.1229.2.5.7 |
nwUpdateThis parameters enables or disables the automatic network recognition.rw Enumeration .1.3.6.1.4.1.1229.2.5.8 |
nwUpdTimeThis parameter specifies the time between two refresh cycles.
Refreshes are at least important to restore lost connections.rw INTEGER .1.3.6.1.4.1.1229.2.5.9 |
nwPollTimeThis parameter specifies the time between two poll cycles.rw INTEGER .1.3.6.1.4.1.1229.2.5.10 |
nwServer1This parameter specifies the first Novell server. If a string is
entered, the print server does only see the file server with
exacly this name (case sensitive).
In additiion, this parameter is used by Pure IP to find this Novell
Server, given by his IP address or, if DNS is configured, his full
DNS name.rw DisplayString .1.3.6.1.4.1.1229.2.5.11 |
nwServer2This parameter specifies the second Novell server.
If a string is entered, the print server does only see
the file server with exacly this name (case sensitive).
Use only if nwServer1 is also used.
In additiion, this parameter is used by Pure IP to find this Novell
Server, given by his IP address or, if DNS is configured, his full
DNS name.rw DisplayString .1.3.6.1.4.1.1229.2.5.12 |
nwServer3This parameter specifies the third Novell server.
If a string is entered, the print server does only see
the file server with exacly this name (case sensitive).
Use only if nwServer1 and 2 are also used.
In additiion, this parameter is used by Pure IP to find this Novell
Server, given by his IP address or, if DNS is configured, his full
DNS name.rw DisplayString .1.3.6.1.4.1.1229.2.5.13 |
nwServer4This parameter specifies the 4th Novell server.
If a string is entered, the print server does only see
the file server with exacly this name (case sensitive).
Use only if nwServer1, 2, and 3 are also used.
In additiion, this parameter is used by Pure IP to find this Novell
Server, given by his IP address or, if DNS is configured, his full
DNS name.rw DisplayString .1.3.6.1.4.1.1229.2.5.14 |
nwNDSCommonNameThis parameter specifies the NDS name.ro DisplayString .1.3.6.1.4.1.1229.2.5.15 |
nwNDSTreeFoundThis parameter specifies the name of the NDS tree
containing the print server objectro DisplayString .1.3.6.1.4.1.1229.2.5.16 |
nwNDSFoundThis parameter specifies the number of objects
with the same NDS name.ro INTEGER .1.3.6.1.4.1.1229.2.5.17 |
nwConnNumberThis parameter specifies the number of the available
NetWare connections.ro INTEGER .1.3.6.1.4.1.1229.2.5.18 |
nwConnTableThis object specifies a table containing a list of
NetWare connections entries. The number of entries
is given by the value of nwConnNumber. SEQUENCE OF NWConnEntry .1.3.6.1.4.1.1229.2.5.19 |
nwConnEntryEntry of NCP connection table. NWConnEntry .1.3.6.1.4.1.1229.2.5.19.1 |
nwConnIndexThis object contains the index of the table being a
unique value for each NetWare connection. Its value
ranges between 1 and the value of nwConnNumber.ro INTEGER .1.3.6.1.4.1.1229.2.5.19.1.1 |
nwConnServerThis parameter specifies the NetWare server name.ro DisplayString .1.3.6.1.4.1.1229.2.5.19.1.2 |
nwConnStateThis parameter specifies the state of the
NetWare connection.ro Enumeration .1.3.6.1.4.1.1229.2.5.19.1.3 |
nwConnLastErrorThis parameter specifies the last connection error.
VALUE MEANING
0 No Error
2 Bindery Login refused (Hint: If not connected - delete Password)
3 Bindery ChangePassword failed
32 NDS Login refused (Hint: If not connected - delete Password)
48 NDS ChangePassword failedro INTEGER .1.3.6.1.4.1.1229.2.5.19.1.4 |
nwConnServerStateThis parameter specifies the server state.ro Enumeration .1.3.6.1.4.1.1229.2.5.19.1.5 |
nwConnHeaderThis parameter specifies the frame header used in a connection.ro Enumeration .1.3.6.1.4.1.1229.2.5.19.1.6 |
nwConnNetThis parameter specifies the network number
of the connected file serverro INTEGER .1.3.6.1.4.1.1229.2.5.19.1.7 |
nwQueueNumberThis parameter specifies the number
of available NetWare queues.ro INTEGER .1.3.6.1.4.1.1229.2.5.20 |
nwQueueTableThis object specifies a table containing a list of
NetWare queue entries. The number of entries is
given by the value of nwQueueNumber. SEQUENCE OF NWQueueEntry .1.3.6.1.4.1.1229.2.5.21 |
nwQueueEntryEntry of NCP queue table. NWQueueEntry .1.3.6.1.4.1.1229.2.5.21.1 |
nwQueueIndexThis object contains the index of the table being a
unique value for each queue. Its value ranges between 1
and the value of nwQueueNumber.ro INTEGER .1.3.6.1.4.1.1229.2.5.21.1.1 |
nwQueueNameThis parameter specifies the NetWare queue name.ro DisplayString .1.3.6.1.4.1.1229.2.5.21.1.2 |
nwQueueConnIdThis parameter specifies the connection ID.ro INTEGER .1.3.6.1.4.1.1229.2.5.21.1.3 |
nwQueuePortThis parameter specifies the logical printer used.ro Enumeration .1.3.6.1.4.1.1229.2.5.21.1.4 |
nwQueueStateThis parameter specifies the state of the queue.ro Enumeration .1.3.6.1.4.1.1229.2.5.21.1.5 |
nwRprinterHeaderThis parameter shows the used frame headers (remote printer mode).ro Enumeration .1.3.6.1.4.1.1229.2.5.22 |
nwNDSPwdThis parameter enables the NDS password.rw Enumeration .1.3.6.1.4.1.1229.2.5.23 |
nwBinderyPwdThis parameter enables the Bindery password.rw Enumeration .1.3.6.1.4.1.1229.2.5.24 |
nw8025This parameter enables or disables the
frame header TOKENRING_802.5.rw Enumeration .1.3.6.1.4.1.1229.2.5.25 |
nwPserverThis parameter enables or disables the
print server mode.rw Enumeration .1.3.6.1.4.1.1229.2.5.26 |
nwRprinterThis parameter enables or disables the
remote printer mode.rw Enumeration .1.3.6.1.4.1.1229.2.5.27 |
nwAdvPserverThis parameter specifies the PSERVER
name in remote printer mode.rw DisplayString .1.3.6.1.4.1.1229.2.5.28 |
nwLogPrinterThis parameter specifies the logical printer
for PSERVER in remote printer mode.rw Enumeration .1.3.6.1.4.1.1229.2.5.29 |
nwSPXConnStateThis parameter specifies the state of the SPX
connection in remote printer mode.ro Enumeration .1.3.6.1.4.1.1229.2.5.30 |
nwNDSTreeThis parameter specifies the optional NDS tree
name. If a string is entered, the print server only
sees the Novell servers within this tree.rw DisplayString .1.3.6.1.4.1.1229.2.5.31 |
nwIPXThis parameter enables or disables the IPX protocol.rw Enumeration .1.3.6.1.4.1.1229.2.5.32 |
nwMyNetThis parameter specifies the network number of the print server.ro INTEGER .1.3.6.1.4.1.1229.2.5.33 |
nwPureIpThis parameter specifies the pure IP mode of the print server.rw Enumeration .1.3.6.1.4.1.1229.2.5.34 |
sehApple OBJECT IDENTIFIER .1.3.6.1.4.1.1229.2.6 |
appleTalkThis parameter enables or disables AppleTalk.rw Enumeration .1.3.6.1.4.1.1229.2.6.1 |
appleNameThis parameter specifies the Apple name.rw DisplayString .1.3.6.1.4.1.1229.2.6.2 |
appleZoneThis parameter specifies the zone.rw DisplayString .1.3.6.1.4.1.1229.2.6.3 |
applePrinterThis parameter specifies the printer type. It must be exactly
the same as requested by the AppleServer, otherwise
the Print Server would be ignored.rw DisplayString .1.3.6.1.4.1.1229.2.6.4 |
appleCurrentNameThis parameter specifies the current Apple name.ro DisplayString .1.3.6.1.4.1.1229.2.6.5 |
appleCurrentZoneThis parameter specifies the current zone.ro DisplayString .1.3.6.1.4.1.1229.2.6.6 |
appleEntityThis parameter specifies the entity types.ro DisplayString .1.3.6.1.4.1.1229.2.6.7 |
appleNetThis parameter specifies the network number
of the network where the print server belongs to.ro INTEGER .1.3.6.1.4.1.1229.2.6.8 |
appleNodeThis parameter specifies the node
number of the print server.ro INTEGER .1.3.6.1.4.1.1229.2.6.9 |
appleRouterNetThis parameter specifies the network
number of the router.ro INTEGER .1.3.6.1.4.1.1229.2.6.10 |
appleRouterNodeThis parameter specifies the node
number of the router.ro INTEGER .1.3.6.1.4.1.1229.2.6.11 |
appleBidirectionalEnable bidirectional communication with the printer.rw Enumeration .1.3.6.1.4.1.1229.2.6.12 |
appleBinaryEnable different Modes for Adobe
Communication protocol.rw Enumeration .1.3.6.1.4.1.1229.2.6.13 |
appleRendezvousThis parameter enables or disables Apple Rendezvous.rw Enumeration .1.3.6.1.4.1.1229.2.6.14 |
applePortNumberNumber of Apple portsro INTEGER .1.3.6.1.4.1.1229.2.6.20 |
applePortTableTable of AppleTalk ports. SEQUENCE OF ApplePortTableEntry .1.3.6.1.4.1.1229.2.6.21 |
applePortEntryTable of AppleTalk ports. ApplePortTableEntry .1.3.6.1.4.1.1229.2.6.21.1 |
applePortIndexThis object contains the index of the table being a unique
value for each Apple port. Its value ranges between 1
and the value of applePortNumber.ro INTEGER .1.3.6.1.4.1.1229.2.6.21.1.1 |
applePortBidirectionalEnable bidirectional communication with the printer.rw Enumeration .1.3.6.1.4.1.1229.2.6.21.1.2 |
applePortPrinterThis parameter specifies the printer type. It must be exactly
the same as requested by the AppleServer, otherwise
the Print Server would be ignored.rw DisplayString .1.3.6.1.4.1.1229.2.6.21.1.3 |
applePortEntityThis parameter specifies the entity types.ro DisplayString .1.3.6.1.4.1.1229.2.6.21.1.4 |
applePortBinaryEncodingEnable different Modes for Adobe
Communication protocol.rw Enumeration .1.3.6.1.4.1.1229.2.6.21.1.5 |
applePortCurrentNameThis parameter specifies the current Apple name.ro DisplayString .1.3.6.1.4.1.1229.2.6.21.1.6 |
appleRendezvousPortNameThis parameter specifies the Rendezvous port name.rw DisplayString .1.3.6.1.4.1.1229.2.6.21.1.10 |
appleRendezvousCurrentPortNameThis parameter specifies the current Rendezvous port name.ro DisplayString .1.3.6.1.4.1.1229.2.6.21.1.11 |
sehSnmp OBJECT IDENTIFIER .1.3.6.1.4.1.1229.2.7 |
snmpIpAddr1This parameter specifies the first Trap IP address.rw IpAddress .1.3.6.1.4.1.1229.2.7.1 |
snmpIpAddr2This parameter specifies the second Trap IP address.rw IpAddress .1.3.6.1.4.1.1229.2.7.2 |
snmpIpxAddr1This parameter specifies the first Trap IPX address.rw PhysAddress .1.3.6.1.4.1.1229.2.7.3 |
snmpIpxAddr2This parameter specifies the second Trap IPX address.rw PhysAddress .1.3.6.1.4.1.1229.2.7.4 |
snmpTrapCommThis parameter specifies the trap community.rw DisplayString .1.3.6.1.4.1.1229.2.7.5 |
snmpAutTrapThis parameter enables authentication traps.rw Enumeration .1.3.6.1.4.1.1229.2.7.6 |
snmpPrtTrapThis parameter enables printer traps.rw Enumeration .1.3.6.1.4.1.1229.2.7.7 |
snmpTrapNumberThis parameter specifies the number of SNMP Traps.ro INTEGER .1.3.6.1.4.1.1229.2.7.8 |
snmpTrapTableThis object specifies a table containing a list
of SNMP Trap entries. The number of
entries is given by the value of snmpTrapNumber. SEQUENCE OF SnmpTrapEntry .1.3.6.1.4.1.1229.2.7.9 |
snmpTrapEntryEntry in SNMP trap table. SnmpTrapEntry .1.3.6.1.4.1.1229.2.7.9.1 |
snmpTrapIndexThis object contains the index of the table being a unique
value for each SNMP Trap. Its value ranges between 1
and the value of snmpTrapNumber.ro INTEGER .1.3.6.1.4.1.1229.2.7.9.1.1 |
snmpTrapIpAddressThis parameter specifies the Trap IP address.rw IpAddress .1.3.6.1.4.1.1229.2.7.9.1.2 |
snmpTrapIpxAddressThis parameter specifies the Trap IPX address.rw PhysAddress .1.3.6.1.4.1.1229.2.7.9.1.3 |
snmpTrapAuthenticationThis parameter enables authentication traps.rw Enumeration .1.3.6.1.4.1.1229.2.7.9.1.4 |
snmpTrapPrinter1This parameter enables printer traps.rw Enumeration .1.3.6.1.4.1.1229.2.7.9.1.5 |
snmpTrapMask1This parameter specifies the printer error bits.
BITS MEANING
2^0 paper jam
2^1 paper empty
2^2 toner low
2^3 cover open
2^4 toner empty
2^5 cassette not ready
2^6 warming up
2^7 offline
2^8 engine error
2^9 noselect
2^14 service call
2^15 misc errorrw INTEGER .1.3.6.1.4.1.1229.2.7.9.1.6 |
snmpTrapCommunityThis parameter specifies the trap community.rw DisplayString .1.3.6.1.4.1.1229.2.7.9.1.7 |
snmpCommunityThis parameter specifies the SNMP version 1 community.rw DisplayString .1.3.6.1.4.1.1229.2.7.20 |
snmpV1This parameter enables the SNMP Version 1 support.rw Enumeration .1.3.6.1.4.1.1229.2.7.21 |
snmpV1AccModeThis parameter specifies the SNMP Version 1 access mode.rw Enumeration .1.3.6.1.4.1.1229.2.7.22 |
snmpV3This parameter enables the SNMP Version 1 support.rw Enumeration .1.3.6.1.4.1.1229.2.7.31 |
sehActions OBJECT IDENTIFIER .1.3.6.1.4.1.1229.2.8 |
actActionThis parameter specifies the actions available for the print server.
The value restoreFactorySettings initiates the resetting of all
parameters followed by a restart of the print server.
The value restart initiates a restart of the print server.
The value printStatusPage prints out a status page.
The other values are return codes only.rw Enumeration .1.3.6.1.4.1.1229.2.8.1 |
actUpdatetodorw Enumeration .1.3.6.1.4.1.1229.2.8.10 |
actUpdateUrltodorw DisplayString .1.3.6.1.4.1.1229.2.8.11 |
actUpdateProxytodorw Enumeration .1.3.6.1.4.1.1229.2.8.12 |
actUpdateProxyNametodorw DisplayString .1.3.6.1.4.1.1229.2.8.13 |
actPrtUpdatetodorw Enumeration .1.3.6.1.4.1.1229.2.8.14 |
actPrtUpdateUrltodorw DisplayString .1.3.6.1.4.1.1229.2.8.15 |
actPrtUpdateUsrtodorw DisplayString .1.3.6.1.4.1.1229.2.8.16 |
actPrtUpdatePwdtodorw DisplayString .1.3.6.1.4.1.1229.2.8.17 |
actPrtUpdateProxytodorw Enumeration .1.3.6.1.4.1.1229.2.8.18 |
actPrtUpdateProxyNametodorw DisplayString .1.3.6.1.4.1.1229.2.8.19 |
sehTokenRing OBJECT IDENTIFIER .1.3.6.1.4.1.1229.2.10 |
trEarlyTokRelThis parameter enables or disables the
early token release in 16 Mbit/s networks.rw Enumeration .1.3.6.1.4.1.1229.2.10.1 |
trSourceRoutingThis parameter enables or disables the source routing.rw Enumeration .1.3.6.1.4.1.1229.2.10.2 |
trPhysAddrThis parameter specifies the locally
administered address.rw PhysAddress .1.3.6.1.4.1.1229.2.10.3 |
trRingSpeedThis parameter specifies the ring speed.ro Enumeration .1.3.6.1.4.1.1229.2.10.4 |
sehWireless OBJECT IDENTIFIER .1.3.6.1.4.1.1229.2.11 |
wlanModeThis parameter specifies the wireless mode.rw Enumeration .1.3.6.1.4.1.1229.2.11.1 |
wlanChannelThis parameter specifies the channel when in ad-hoc mode.rw INTEGER .1.3.6.1.4.1.1229.2.11.2 |
wlanNetworkNameThis parameter specifies the name of the network.rw DisplayString .1.3.6.1.4.1.1229.2.11.3 |
wlanEncryptThis parameter specifies the encryption algorithm for wireless.
Default is NONE.
(0 = None, 1 = WEP, 2 = WEP Shared Key, 3 = WPA-TKIP,
4 = WPA-AES, 5 = WPA2-TKIP, 6 = WPA2-AES, 7 = WPA-AES-TKIP,
8 = WPA2-AES-TKIP, 9 = WPA-AUTO)rw Enumeration .1.3.6.1.4.1.1229.2.11.5 |
wlanWepKey1This parameter specifies the 1st WEP-key.rw DisplayString .1.3.6.1.4.1.1229.2.11.6 |
wlanDistanceThis parameter specifies the distance between APs.rw Enumeration .1.3.6.1.4.1.1229.2.11.7 |
wlanLevelThis parameter shows the level.ro INTEGER .1.3.6.1.4.1.1229.2.11.8 |
wlanSpeedThis parameter shows the current transmission speed.ro DisplayString .1.3.6.1.4.1.1229.2.11.9 |
wlanConnectionStatusThis parameter shows the connection status.ro Enumeration .1.3.6.1.4.1.1229.2.11.10 |
wlanManufacturerThis parameter shows the manufacturer of the wireless card.ro DisplayString .1.3.6.1.4.1.1229.2.11.11 |
wlanCurrentNameThis parameter shows the current network-name of the wireless card.ro DisplayString .1.3.6.1.4.1.1229.2.11.12 |
wlanPcmciaSerialThis parameter shows the serial-no of the wireless card.ro DisplayString .1.3.6.1.4.1.1229.2.11.13 |
wlanKeyIdThis parameter specifies the WepKey index used for transmission. (1..4)rw INTEGER .1.3.6.1.4.1.1229.2.11.14 |
wlanWepKey2This parameter specifies the 2nd WEP-key.rw DisplayString .1.3.6.1.4.1.1229.2.11.15 |
wlanWepKey3This parameter specifies the 3rd WEP-key.rw DisplayString .1.3.6.1.4.1.1229.2.11.16 |
wlanWepKey4This parameter specifies the 4th WEP-key.rw DisplayString .1.3.6.1.4.1.1229.2.11.17 |
eapAuthTypeThis parameter specifies the authentication algorithm.
Default is open-system.
For wired print server the syntax is different.
(1 = no authentication, 2 = unsupported, 3 = MD5, 4 = TLS)rw Enumeration .1.3.6.1.4.1.1229.2.11.18 |
eapAuthNameThis parameter specifies the user name for EAP authentication.rw DisplayString .1.3.6.1.4.1.1229.2.11.19 |
eapAuthPwdThis parameter specifies the password for EAP authentication.rw DisplayString .1.3.6.1.4.1.1229.2.11.20 |
wlanPSKThis parameter specifies the Pre Shared Key for Wi-Fi Protected Access (WPA).rw DisplayString .1.3.6.1.4.1.1229.2.11.21 |
wlanRoamingRoaming between APsrw Enumeration .1.3.6.1.4.1.1229.2.11.22 |
eapAuthExternAuthentication Types for the outer system config.rw Enumeration .1.3.6.1.4.1.1229.2.11.23 |
eapAuthInternAuthentication Types for the inner system config.rw Enumeration .1.3.6.1.4.1.1229.2.11.24 |
eapAuthAnonymousNameAnonymous Name for the unencrypted Part of EAP.rw DisplayString .1.3.6.1.4.1.1229.2.11.25 |
eapAuthSupplicantAddOnThis parameter specifies extra Prameters for Authentication.rw DisplayString .1.3.6.1.4.1.1229.2.11.26 |
wlandBm2RoamThis parameter specifies the Level in -dBm to start Roaming.rw INTEGER .1.3.6.1.4.1.1229.2.11.27 |
wlandWpsThis parameter specifies if WPS is enabledrw Enumeration .1.3.6.1.4.1.1229.2.11.28 |
wlenEnable or disable wireless networkingrw Enumeration .1.3.6.1.4.1.1229.2.11.30 |
wlanEnables wireless functionality on hybrid devices.rw Enumeration .1.3.6.1.4.1.1229.2.11.40 |
onTheAirWorking state for hybrid devices.ro Enumeration .1.3.6.1.4.1.1229.2.11.41 |
sehWin OBJECT IDENTIFIER .1.3.6.1.4.1.1229.2.20 |
winSmbtodorw Enumeration .1.3.6.1.4.1.1229.2.20.1 |
winNetbiosNametodorw DisplayString .1.3.6.1.4.1.1229.2.20.20 |
winNetbiosDomaintodorw DisplayString .1.3.6.1.4.1.1229.2.20.21 |
winNetbiosRefreshtodorw INTEGER .1.3.6.1.4.1.1229.2.20.22 |
winWinsRegThis parameter enables the WINS registration via DHCP.rw Enumeration .1.3.6.1.4.1.1229.2.20.40 |
winWinsDHCPThis parameter enables the transfer of the IP address
of the WINS server from the DHCP server.rw Enumeration .1.3.6.1.4.1.1229.2.20.41 |
winWinsPrimarySrvThis parameter specifies the IP address or DNS Name of the primary WINS server.rw DisplayString .1.3.6.1.4.1.1229.2.20.42 |
winWinsSecondarySrvThis parameter specifies the IP address or DNS Name of the secondary WINS server.rw DisplayString .1.3.6.1.4.1.1229.2.20.43 |
sehTime OBJECT IDENTIFIER .1.3.6.1.4.1.1229.2.21 |
timeSntpThis parameter enables or disables the simple network time protocol.rw Enumeration .1.3.6.1.4.1.1229.2.21.1 |
timeServerThis parameter specifies the IP address or DNS Name of the SNTP server.rw DisplayString .1.3.6.1.4.1.1229.2.21.2 |
timeZoneOffsetThis parameter specifies the time zone offset to UTC.rw INTEGER .1.3.6.1.4.1.1229.2.21.3 |
timeDateThis parameter shows the actual date and time.ro DisplayString .1.3.6.1.4.1.1229.2.21.4 |
timeZoneNameAndRuleThis parameter specifies the name of the time zone
and the rule for daylight saving.
example: CET/CEST (EU)rw DisplayString .1.3.6.1.4.1.1229.2.21.5 |
sehPrintjob OBJECT IDENTIFIER .1.3.6.1.4.1.1229.2.22 |
pjobCountThis parameter specifies the number of available jobs
in the print job history table.ro INTEGER .1.3.6.1.4.1.1229.2.22.1 |
pjobTableThis object specifies a table containing a list of jobs
in the print job history table. The number of
entries is given by the value of pjobCount. SEQUENCE OF PjobEntry .1.3.6.1.4.1.1229.2.22.2 |
pjobEntryEntry in the job history. PjobEntry .1.3.6.1.4.1.1229.2.22.2.1 |
pjobIndexThis object contains the index of the table being a unique
value for each job.ro INTEGER .1.3.6.1.4.1.1229.2.22.2.1.1 |
pjobStatusThis parameter describes the status of the print job.ro Enumeration .1.3.6.1.4.1.1229.2.22.2.1.2 |
pjobProtocolThis parameter describes the protocol of the print job.ro Enumeration .1.3.6.1.4.1.1229.2.22.2.1.3 |
pjobNameThis parameter describes the name of the print job.ro DisplayString .1.3.6.1.4.1.1229.2.22.2.1.4 |
pjobSenderThis parameter describes the sender of the print job.ro DisplayString .1.3.6.1.4.1.1229.2.22.2.1.5 |
pjobSizeThis parameter describes the size (in Bytes) of the print job.
For jobs larger 2GB, the size is in KByte and the pJobSizeType is kbytes.ro INTEGER .1.3.6.1.4.1.1229.2.22.2.1.6 |
pjobCreationTimeThis parameter describes the creation time of the print job.ro DisplayString .1.3.6.1.4.1.1229.2.22.2.1.7 |
pjobDurationThis parameter describes the duration (in seconds) of the print job.ro INTEGER .1.3.6.1.4.1.1229.2.22.2.1.8 |
pjobPportThis parameter describes the printer port of the print job.ro INTEGER .1.3.6.1.4.1.1229.2.22.2.1.9 |
pjobPagesThis parameter describes the number of pages of the print job.ro INTEGER .1.3.6.1.4.1.1229.2.22.2.1.10 |
pjobSizeTypeThis parameter describes the job size.ro Enumeration .1.3.6.1.4.1.1229.2.22.2.1.11 |
sehNotification OBJECT IDENTIFIER .1.3.6.1.4.1.1229.2.25 |
nfSlotNumberThis parameter specifies the number of notification slots.ro INTEGER .1.3.6.1.4.1.1229.2.25.1 |
nfSlotTableThis object specifies a table containing a list
of notification slot entries. The number of
entries is given by the value of nfSlotNumber. SEQUENCE OF NFSlotTableEntry .1.3.6.1.4.1.1229.2.25.2 |
nfSlotEntry NFSlotTableEntry .1.3.6.1.4.1.1229.2.25.2.1 |
nfSlotIndexThis object contains the index of the table being a unique
value for each notification slot. Its value ranges between 1
and the value of nfSlotNumber.ro INTEGER .1.3.6.1.4.1.1229.2.25.2.1.1 |
nfMailNotificationThis parameter enables or disables the e-mail
notification.rw Enumeration .1.3.6.1.4.1.1229.2.25.2.1.2 |
nfMailAddressThis parameter specifies the IP address of the e-mail recipient 1.rw DisplayString .1.3.6.1.4.1.1229.2.25.2.1.3 |
nfMailServerThis parameter specifies the mail server for the e-mail
notificationrw DisplayString .1.3.6.1.4.1.1229.2.25.2.1.4 |
nfTrapIpAddressThis parameter specifies the Trap IP address.rw IpAddress .1.3.6.1.4.1.1229.2.25.2.1.10 |
nfTrapIpxAddressThis parameter specifies the Trap IPX address.rw PhysAddress .1.3.6.1.4.1.1229.2.25.2.1.11 |
nfTrapAuthenticationThis parameter enables authentication traps.rw Enumeration .1.3.6.1.4.1.1229.2.25.2.1.12 |
nfTrapPrinterThis parameter enables printer traps.rw Enumeration .1.3.6.1.4.1.1229.2.25.2.1.13 |
nfTrapCommunityThis parameter specifies the trap community.rw DisplayString .1.3.6.1.4.1.1229.2.25.2.1.14 |
nfAccJobHistThis parameter enables printer mail notification for the
job history to the mail recipient.rw Enumeration .1.3.6.1.4.1.1229.2.25.2.1.15 |
nfAccJobHistTimeThis parameter set the time limit in hours to
send the job history to the mail recipient.rw INTEGER .1.3.6.1.4.1.1229.2.25.2.1.16 |
nfAccJobHistCntrThis parameter set the job limit to
send the job history to the mail recipient.
Range is 1 to 60rw INTEGER .1.3.6.1.4.1.1229.2.25.2.1.17 |
nfPortNumberThis parameter specifies the number of notification ports.ro INTEGER .1.3.6.1.4.1.1229.2.25.5 |
nfPortTableThis object specifies a table containing a list
of notification slot entries. The number of
entries is given by the value of nfPortNumber. SEQUENCE OF NFPortTableEntry .1.3.6.1.4.1.1229.2.25.6 |
nfPortEntryEntry in the NFPort table. NFPortTableEntry .1.3.6.1.4.1.1229.2.25.6.1 |
nfPortIndexThis object contains the index of the table being a unique
value for each physical port. Its value ranges between 1
and the value of nfPortNumber.ro INTEGER .1.3.6.1.4.1.1229.2.25.6.1.1 |
nfPortMailMask1This parameter specifies the mail mask bits of the e-mail
notification for recipient 1.
BITS MEANING
2^0 paper jam
2^1 paper empty
2^2 toner low
2^3 cover open
2^4 toner empty
2^5 cassette not ready
2^6 warming up
2^7 offline
2^8 engine error
2^9 noselect
2^10 paper low
2^14 service call
2^15 misc errorrw INTEGER .1.3.6.1.4.1.1229.2.25.6.1.2 |
nfPortMailMask2This parameter specifies the mail mask bits of the e-mail
notification for recipient 2.
BITS MEANING
2^0 paper jam
2^1 paper empty
2^2 toner low
2^3 cover open
2^4 toner empty
2^5 cassette not ready
2^6 warming up
2^7 offline
2^8 engine error
2^9 noselect
2^10 paper low
2^14 service call
2^15 misc errorrw INTEGER .1.3.6.1.4.1.1229.2.25.6.1.3 |
nfPortTrapMask1This parameter specifies the printer error bits.
BITS MEANING
2^0 paper jam
2^1 paper empty
2^2 toner low
2^3 cover open
2^4 toner empty
2^5 cassette not ready
2^6 warming up
2^7 offline
2^8 engine error
2^9 noselect
2^14 service call
2^15 misc errorrw INTEGER .1.3.6.1.4.1.1229.2.25.6.1.20 |
nfPortTrapMask2This parameter specifies the printer error bits.
BITS MEANING
2^0 paper jam
2^1 paper empty
2^2 toner low
2^3 cover open
2^4 toner empty
2^5 cassette not ready
2^6 warming up
2^7 offline
2^8 engine error
2^9 noselect
2^14 service call
2^15 misc errorrw INTEGER .1.3.6.1.4.1.1229.2.25.6.1.21 |
nfPortAccPageCntr1This object switches accounting control for the printer
internal page counter and the first mail recipient on or off.rw Enumeration .1.3.6.1.4.1.1229.2.25.6.1.22 |
nfPortAccPageCntr2This object switches accounting control for the printer
internal page counter and the second mail recipient on or off.rw Enumeration .1.3.6.1.4.1.1229.2.25.6.1.23 |
nfPortAccPageCntrTime1This value set the time in hours to send the printer internal
page counter to the first mail recipient.rw INTEGER .1.3.6.1.4.1.1229.2.25.6.1.24 |
nfPortAccPageCntrTime2This value set the time in hours to send the printer internal
page counter to the second mail recipient.rw INTEGER .1.3.6.1.4.1.1229.2.25.6.1.25 |
nfPortAccPageCntrCntr1This value set the limit of number of pages to send the
printer internal page counter to the first mail recipient.rw INTEGER .1.3.6.1.4.1.1229.2.25.6.1.26 |
nfPortAccPageCntrCntr2This value set the limit of number of pages to send the
printer internal page counter to the second mail recipient.rw INTEGER .1.3.6.1.4.1.1229.2.25.6.1.27 |
nfPortMailList1rw DisplayString .1.3.6.1.4.1.1229.2.25.6.1.31 |
nfPortMailList2rw DisplayString .1.3.6.1.4.1.1229.2.25.6.1.32 |
nfPortTrapList1rw DisplayString .1.3.6.1.4.1.1229.2.25.6.1.33 |
nfPortTrapList2rw DisplayString .1.3.6.1.4.1.1229.2.25.6.1.34 |
nfPortAccPageCntrIndex1This object chooses the printer internal counter
(specified as the index of periCounterTable)
for the first mail recipient.rw INTEGER .1.3.6.1.4.1.1229.2.25.6.1.35 |
nfPortAccPageCntrIndex2This object chooses the printer internal counter
(specified as the index of periCounterTable)
for the first mail recipient.rw INTEGER .1.3.6.1.4.1.1229.2.25.6.1.36 |
nfSmtpServerThis parameter specifies the smtp server for the e-mail
notification.rw DisplayString .1.3.6.1.4.1.1229.2.25.7 |
sehMail OBJECT IDENTIFIER .1.3.6.1.4.1.1229.2.25.8 |
nfPop3This parameter enables POP3 functionality for first configuration set.rw Enumeration .1.3.6.1.4.1.1229.2.25.8.1 |
nfPop3PollThis parameter specifies the POP3 poll intervall in minutes.rw INTEGER .1.3.6.1.4.1.1229.2.25.8.2 |
nfPop3SrvThis parameter specifies the pop3 server DNS name or IP address.rw DisplayString .1.3.6.1.4.1.1229.2.25.8.3 |
nfPop3SrvPortThis is the TCP port number of the pop3 server
we want to connect to.rw INTEGER .1.3.6.1.4.1.1229.2.25.8.4 |
nfPop3SmtpSrvThis parameter specifies the pop3 smtp server DNS name or IP address.rw DisplayString .1.3.6.1.4.1.1229.2.25.8.5 |
nfPop3SmtpPortThis is the TCP port number of the smtp server
we want to connect to.rw INTEGER .1.3.6.1.4.1.1229.2.25.8.6 |
nfPop3UsrThis parameter specifies the pop3 server user name.rw DisplayString .1.3.6.1.4.1.1229.2.25.8.7 |
nfPop3PwdThis parameter specifies the pop3 server user passsword.rw DisplayString .1.3.6.1.4.1.1229.2.25.8.8 |
nfPop3SecurityThis parameter specifies which security protocol we want
to use for mail and password exchange with the pop3 server,
and, if ssl is selected, with the smtp server.rw Enumeration .1.3.6.1.4.1.1229.2.25.8.9 |
nfPop3MDelThis parameter specifies to delete or leave
fetched mail on the server.rw Enumeration .1.3.6.1.4.1.1229.2.25.8.10 |
nfPop3LimitThis parameter describes the maximal byte count for
mails to fetch, zero means unlimited.rw INTEGER .1.3.6.1.4.1.1229.2.25.8.11 |
nfPop3SignatureThis contains the multiline signature email replies.rw DisplayString .1.3.6.1.4.1.1229.2.25.8.12 |
nfSmtpUsrThis parameter specifies the smtp server user name.rw DisplayString .1.3.6.1.4.1.1229.2.25.8.13 |
nfSmtpPwdThis parameter specifies the smtp server user passsword.rw DisplayString .1.3.6.1.4.1.1229.2.25.8.14 |
nfSmtpSndrThis parameter specifies the smtp email sender name.rw DisplayString .1.3.6.1.4.1.1229.2.25.8.15 |
nfSmtpSslThis parameter enables SSL security for the SMTP connection.rw Enumeration .1.3.6.1.4.1.1229.2.25.8.16 |
nfSmtpAsPop3This parameter decides to use the same settings for
SMTP Authentication for user and password as pop3.rw Enumeration .1.3.6.1.4.1.1229.2.25.8.17 |
nfSmtpAuthThis parameter switches the SMTP Authentication on or off.rw Enumeration .1.3.6.1.4.1.1229.2.25.8.18 |
nfPop3P3HisThis parameter contains the highest reached state
of the Pop3 protocol stack.ro MailConnState .1.3.6.1.4.1.1229.2.25.8.20 |
nfPop3SMTPHisThis parameter contains the highest reached state
of the Pop3 Smtp protocol stack.ro MailConnState .1.3.6.1.4.1.1229.2.25.8.21 |
nfPop3P3CtrThis parameter contains the count of fetched Pop3 emails.ro INTEGER .1.3.6.1.4.1.1229.2.25.8.22 |
nfPop3SMTPCtrThis parameter contains the count of sent Pop3 replies emails.ro INTEGER .1.3.6.1.4.1.1229.2.25.8.23 |
nfPop3P3ErrThis parameter contains the last occured Pop3 error.ro MailConnState .1.3.6.1.4.1.1229.2.25.8.24 |
nfPop3SmtpErrThis parameter contains the last occured Smtp error for Pop3 replies.ro MailConnState .1.3.6.1.4.1.1229.2.25.8.25 |
nfPop3P3NextThis parameter contains number of second till the next
Pop3 looking for emails cycle.ro INTEGER .1.3.6.1.4.1.1229.2.25.8.26 |
smtpSMIMESigThis parameter decides to use S/MIME signature/authentication for outgoing emails.rw Enumeration .1.3.6.1.4.1.1229.2.25.8.30 |
smtpSMIMEAddKeyThis parameter decides to attach our public key within the S/MIME signaturerw Enumeration .1.3.6.1.4.1.1229.2.25.8.31 |
smtpSMIMEEncThis parameter decides to use S/MIME encryption for outgoing emails.rw Enumeration .1.3.6.1.4.1.1229.2.25.8.35 |
sehNat OBJECT IDENTIFIER .1.3.6.1.4.1.1229.2.26 |
natLocalThis parameter specifies the local IP Address of the NAT devicerw IpAddress .1.3.6.1.4.1.1229.2.26.1 |
natRemoteThis parameter specifies the remote IP Address of the NAT devicerw IpAddress .1.3.6.1.4.1.1229.2.26.2 |
httpPortThis parameter specifies the local HTTP port of the device.rw INTEGER .1.3.6.1.4.1.1229.2.26.3 |
natMasqueradeThis parameter switches NAT Masquerading on or off for the NAT devicerw Enumeration .1.3.6.1.4.1.1229.2.26.4 |
natIcmpThis parameter switches ICMP forwarding on or off for the NAT devicerw Enumeration .1.3.6.1.4.1.1229.2.26.5 |
spagePortThis parameter specifies the TCP port on the remote device
to print out the status page.
Default is socket printing port 9100rw INTEGER .1.3.6.1.4.1.1229.2.26.6 |
sehNatDrop OBJECT IDENTIFIER .1.3.6.1.4.1.1229.2.27 |
httpsPortThis parameter specifies the local HTTPS port of the device.rw INTEGER .1.3.6.1.4.1.1229.2.27.6 |
ftpPortThis parameter specifies the local FTP command port of the device.rw INTEGER .1.3.6.1.4.1.1229.2.27.7 |
ftpDataPortThis parameter specifies the local FTP data port of the device.rw INTEGER .1.3.6.1.4.1.1229.2.27.8 |
snmpPortThis parameter specifies the local SNMP port of the device.rw INTEGER .1.3.6.1.4.1.1229.2.27.9 |
aicePortThis parameter specifies the local AICE port for MSE CardnCopy of the device.rw INTEGER .1.3.6.1.4.1.1229.2.27.10 |
natDropNumberThis parameter specifies the number of available NAT Drop entriesro INTEGER .1.3.6.1.4.1.1229.2.27.21 |
natDropTableThis object specifies a table containing a list of NAT Drop
entries. The number of entries is given by the value of natDropNumber. SEQUENCE OF NatDropEntry .1.3.6.1.4.1.1229.2.27.22 |
natDropEntryParameters regarding to NAT Drop entry. NatDropEntry .1.3.6.1.4.1.1229.2.27.22.1 |
natDropIndexThis object contains the index of the table being a
unique value for each Nat Drop rule. Its value
ranges between 1 and the value of NatDropNumber.ro INTEGER .1.3.6.1.4.1.1229.2.27.22.1.1 |
natDropPortThis object contains the port number of the NAT drop rule.rw INTEGER .1.3.6.1.4.1.1229.2.27.22.1.2 |
natDropTcpThis object contains 1 if to rule should match TCP packets on this port.rw Enumeration .1.3.6.1.4.1.1229.2.27.22.1.3 |
natDropUdpThis object contains 1 if to rule should match UDP packets on this port.rw Enumeration .1.3.6.1.4.1.1229.2.27.22.1.4 |
natDropLanThis object contains 1 if to rule should match packets at the LAN interface.rw Enumeration .1.3.6.1.4.1.1229.2.27.22.1.5 |
natDropNatThis object contains 1 if to rule should match packets at the MAT interface.rw Enumeration .1.3.6.1.4.1.1229.2.27.22.1.6 |
sehTpg OBJECT IDENTIFIER .1.3.6.1.4.1.1229.2.30 |
tpgNumberThis parameter specifies the number of available ThinPrint gateway entriesro INTEGER .1.3.6.1.4.1.1229.2.30.1 |
tpgTableThis object specifies a table containing a list of ThinPrint gateway
entries. The number of entries is given by the value of tpgNumber. SEQUENCE OF TpgEntry .1.3.6.1.4.1.1229.2.30.2 |
tpgEntryParameters regarding to ThinPrint gateway entry. TpgEntry .1.3.6.1.4.1.1229.2.30.2.1 |
tpgIndexThis object contains the index of the table being a
unique value for each logical printer. Its value
ranges between 1 and the value of tpgNumber.
For the TPG this is also the ThinPrint printer ID.ro INTEGER .1.3.6.1.4.1.1229.2.30.2.1.1 |
tpgPrtNameThinPrint Gatewy Printer Name.rw DisplayString .1.3.6.1.4.1.1229.2.30.2.1.2 |
tpgPrtClassThinPrint Gatewy Printer Class.rw DisplayString .1.3.6.1.4.1.1229.2.30.2.1.3 |
tpgPrtDriverThinPrint Gatewy Printer Driver Name; for future purpose.rw DisplayString .1.3.6.1.4.1.1229.2.30.2.1.4 |
tpgRemoteIpThis parameter specifies the TPG remote IP address of the index related printer.rw DisplayString .1.3.6.1.4.1.1229.2.30.2.1.5 |
tpgRemotePortThis parameter specifies the TPG remote IP port of the index related printer.rw INTEGER .1.3.6.1.4.1.1229.2.30.2.1.6 |
tpgRemoteStatThis parameter specifies the TPG connection status to the remote printer.ro Enumeration .1.3.6.1.4.1.1229.2.30.2.1.7 |
tpgRemoteQueueThis parameter specifies the TPG remote queue name for LPD printing.rw DisplayString .1.3.6.1.4.1.1229.2.30.2.1.8 |
tpgRemoteLPDThis parameter specifies the TPG remote printing protocol for this port.rw Enumeration .1.3.6.1.4.1.1229.2.30.2.1.9 |
tpgLpdModeRFCThis parameter specifies how to handle missing lenght information for the LPD printing backend.
If enabled (default) lenght 0 is commited, otherwise we use a pseudo length bigger than any job
like Microsoft/Windows.rw Enumeration .1.3.6.1.4.1.1229.2.30.2.1.10 |
tpgRemoteUrlThis parameter specifies the TPG remote URL name for IPP printing.rw DisplayString .1.3.6.1.4.1.1229.2.30.2.1.11 |
tpgRemoteIPPsThis parameter specifies if IPP uses SSL connections.rw Enumeration .1.3.6.1.4.1.1229.2.30.2.1.12 |
tpgRemoteStStrThis parameter specifies the TPG remote printer status.ro DisplayString .1.3.6.1.4.1.1229.2.30.2.1.13 |
tpgClientIdThis object specifies the ThinPrint client ID for ThinPrint Connections Services.rw INTEGER .1.3.6.1.4.1.1229.2.30.3 |
tpgAuthKeyThis object specifies the ThinPrint Authentication Key for ThinPrint Connections Services.rw INTEGER .1.3.6.1.4.1.1229.2.30.4 |
tpgBandwidthThis parameter enables the TPG bandwith commitment with tpgBandwidthVal.rw Enumeration .1.3.6.1.4.1.1229.2.30.5 |
tpgBandwidthValThis object specifies the TPG Bandwidth value committed to host.rw INTEGER .1.3.6.1.4.1.1229.2.30.6 |
tpgConnServicesThis parameter enables the TPG Connection Services support.rw Enumeration .1.3.6.1.4.1.1229.2.30.7 |
tpgConnServerThis parameter specifies the IP address of the TPG
Connection Server.rw IpAddress .1.3.6.1.4.1.1229.2.30.8 |
tpgConnServerPortThis parameter specifies the IP port of the TPG
Connection Server.rw INTEGER .1.3.6.1.4.1.1229.2.30.9 |
tpgConnRetryThis parameter specifies the Retry value in seconds
of the TPG Connection Services.rw INTEGER .1.3.6.1.4.1.1229.2.30.10 |
tpgKeepAliveThis parameter specifies the KeepAlive value in seconds of the TPG.rw INTEGER .1.3.6.1.4.1.1229.2.30.11 |
tpgSpagePrtThis parameter specifies the index of the Remote Printer,
which prints the TPG status page.rw INTEGER .1.3.6.1.4.1.1229.2.30.12 |
tpgConnStateThis parameter contains the state of the TPG Connection Services.ro Enumeration .1.3.6.1.4.1.1229.2.30.13 |
tpgStreamComprThis parameter enables the TPG StreamCompression Mode,
used with ThinPrint Server Versions later or equal than 7.0.rw Enumeration .1.3.6.1.4.1.1229.2.30.14 |
tpgSpageThis parameter enables the TPG status page on printed to the remote device.rw Enumeration .1.3.6.1.4.1.1229.2.30.15 |
tpgPrtOpenToValThis object specifies the TPG printer open timeout value in seconds.
After the specified time period a unsuccessfully try to open
a remote printer returns with an error.
Value of 0 disables this timeout. Max value is equal to one dayrw INTEGER .1.3.6.1.4.1.1229.2.30.16 |
tpgJobSendTimeoutThis object specifies the TPG job send timeout value in seconds.
If over the specified time period no data could be written to the
remote printer, the connection to printer will be closed and
an error returned.
Value of 0 disables this timeout. Max value is equal to one dayrw INTEGER .1.3.6.1.4.1.1229.2.30.17 |
tpgJobRecvTimeoutThis object specifies the TPG job receive timeout value in minutes.
If over the specified time period no data could be received from the
ThinePrint server, the connections to printer and server will be closed.
Value of 0 disables this timeout. Max value is equal to one dayrw INTEGER .1.3.6.1.4.1.1229.2.30.18 |
tpgMonitorPollThis object specifies the poll time in seconds for the remote monitoring functionality.rw INTEGER .1.3.6.1.4.1.1229.2.30.20 |
tpgMonitorPingThis parameter enables the TPG remote monitoring using PING packets.rw Enumeration .1.3.6.1.4.1.1229.2.30.21 |
tpgMonitorSnmpThis parameter enables the TPG remote monitoring using SNMP packets.rw Enumeration .1.3.6.1.4.1.1229.2.30.22 |
sehLrs OBJECT IDENTIFIER .1.3.6.1.4.1.1229.2.31 |
lrsAesKeyThis parameter defines the AES decryption keyrw DisplayString .1.3.6.1.4.1.1229.2.31.1 |
lrsAesTypeThis parameter defines the AES type of the keyrw Enumeration .1.3.6.1.4.1.1229.2.31.2 |
lrsIsppPortThis parameter defines the number of the ISPP portrw INTEGER .1.3.6.1.4.1.1229.2.31.3 |
lrsUseInstallationKeyThis parameter enables/disables the use of the installation keyrw Enumeration .1.3.6.1.4.1.1229.2.31.4 |
lrsAllowKeyChangeThis parameter enables/disables the automatic adoption
of the AES decryption key from the hostrw Enumeration .1.3.6.1.4.1.1229.2.31.5 |
lrsPrtPortThis parameter defines the logical printer which is used to address the printerrw INTEGER .1.3.6.1.4.1.1229.2.31.6 |
sehProtection OBJECT IDENTIFIER .1.3.6.1.4.1.1229.2.40 |
protectionThis parameter enables the protection filter rules at all.rw Enumeration .1.3.6.1.4.1.1229.2.40.1 |
protectionTestThis parameter enables the protection filter rules test mode.
If protection is on, it will be switched off with next restart.
To enable filter rules permanently, this parameter is to switch off.rw Enumeration .1.3.6.1.4.1.1229.2.40.2 |
protectionLevelThis parameter determines the manner of
of our filter rules below.
protectutn will only protect the tcp/utn port,
protecttcp will protect all tcp ports,
protectall will protect all ip ports.rw Enumeration .1.3.6.1.4.1.1229.2.40.3 |
ipFilterNumberNumber of entries in the Ip filter table.ro INTEGER .1.3.6.1.4.1.1229.2.40.10 |
ipFilterTableThis object specifies a table containing IP filter descriptions. SEQUENCE OF IpFilterEntryType .1.3.6.1.4.1.1229.2.40.11 |
ipFilterEntryEntry of Ip filter table. IpFilterEntryType .1.3.6.1.4.1.1229.2.40.11.1 |
ipFilterIndexThis object contains the index of the table being a
unique value for each IP filter rule. INTEGER .1.3.6.1.4.1.1229.2.40.11.1.1 |
ipFilterOnOffThis parameter specifies wether the rule is active or not.rw Enumeration .1.3.6.1.4.1.1229.2.40.11.1.2 |
ipFilterAddrThis parameter specifies the Ip address for the filter rule.rw DisplayString .1.3.6.1.4.1.1229.2.40.11.1.3 |
macFilterNumberNumber of entries in the Ip filter table.ro INTEGER .1.3.6.1.4.1.1229.2.40.12 |
macFilterTableThis object specifies a table containing IP filter descriptions. SEQUENCE OF MacFilterEntry .1.3.6.1.4.1.1229.2.40.13 |
macFilterEntryEntry of Ip filter table. MacFilterEntry .1.3.6.1.4.1.1229.2.40.13.1 |
macFilterIndexThis object contains the index of the table being a
unique value for each IP filter rule. INTEGER .1.3.6.1.4.1.1229.2.40.13.1.1 |
macFilterOnOffThis parameter specifies wether the rule is active or not.rw Enumeration .1.3.6.1.4.1.1229.2.40.13.1.2 |
macFilterAddrThis parameter specifies the Ip address for the filter rule.rw PhysAddress .1.3.6.1.4.1.1229.2.40.13.1.3 |
cipherStrengthThis object specifies a central switch for the strenght of used ciphersuites.rw Enumeration .1.3.6.1.4.1.1229.2.40.20 |
rsaBitsThis object specifies the RSA key bit lenght. Higher values results in more secure but slower connections.rw Enumeration .1.3.6.1.4.1.1229.2.40.21 |
sehUser OBJECT IDENTIFIER .1.3.6.1.4.1.1229.2.41 |
usrAnyNameThis parameter specifies the any users name.rw DisplayString .1.3.6.1.4.1.1229.2.41.1 |
usrAnyPwdThis parameter specifies the any users password.rw DisplayString .1.3.6.1.4.1.1229.2.41.2 |
usrAnyAccThis parameter specifies the any users access rights.rw Enumeration .1.3.6.1.4.1.1229.2.41.3 |
usrAnyHashThis parameter specifies the password Hash of user any.rw Enumeration .1.3.6.1.4.1.1229.2.41.4 |
usrAnyCypherThis parameter specifies the encryption cypher of user any.rw Enumeration .1.3.6.1.4.1.1229.2.41.5 |
usrAdminNameThis parameter specifies the administrators name.rw DisplayString .1.3.6.1.4.1.1229.2.41.11 |
usrAdminPwdThis parameter specifies the administrators password.rw DisplayString .1.3.6.1.4.1.1229.2.41.12 |
usrAdminAccThis parameter specifies the administrators access rights.rw Enumeration .1.3.6.1.4.1.1229.2.41.13 |
usrAdminHashThis parameter specifies the password Hash of user any.rw Enumeration .1.3.6.1.4.1.1229.2.41.14 |
usrAdminCypherThis parameter specifies the encryption cypher of user any.rw Enumeration .1.3.6.1.4.1.1229.2.41.15 |
sehIPsec OBJECT IDENTIFIER .1.3.6.1.4.1.1229.2.42 |
ipsecIPsecThis parameter enables or disables IPsec.rw Enumeration .1.3.6.1.4.1.1229.2.42.1 |
ipsecConfigThis parameter specifies the configurations for IPsec, which uses
configured Rules or configuration files.rw Enumeration .1.3.6.1.4.1.1229.2.42.2 |
ipsecDefActionThis parameter specifies the action for IPsec default configured
rules.rw Enumeration .1.3.6.1.4.1.1229.2.42.3 |
ipsecRulesNumberThis parameter specifies the number of available IPsec rules.ro INTEGER .1.3.6.1.4.1.1229.2.42.4 |
ipsecRulesTableThis object specifies a table containing a list of IPsec rules
entries. The number of entries is given by the value of
ipsecRulesNumber. SEQUENCE OF IPsecRulesEntry .1.3.6.1.4.1.1229.2.42.5 |
ipsecRulesEntryParameters regarding to configured rules. IPsecRulesEntry .1.3.6.1.4.1.1229.2.42.5.1 |
ipsecRulesIndexThis object contains the index of the table being a
unique value for each IPsec rule. Its value ranges
between 1 and the value of ipsecRulesNumber.ro INTEGER .1.3.6.1.4.1.1229.2.42.5.1.1 |
ipsecRulesEnabledThis parameter enables or disables the IPsec rules.rw Enumeration .1.3.6.1.4.1.1229.2.42.5.1.2 |
ipsecRulesIaddrThis parameter specifies the address template number
of the IPsec rules.rw Enumeration .1.3.6.1.4.1.1229.2.42.5.1.3 |
ipsecRulesIservThis parameter specifies the service template number
of the IPsec rules.rw Enumeration .1.3.6.1.4.1.1229.2.42.5.1.4 |
ipsecRulesIPsecThis parameter specifies the IPsec template number
of the IPsec rules.rw Enumeration .1.3.6.1.4.1.1229.2.42.5.1.5 |
ipsecRulesActionThis parameter specifies the action of the IPsec rules.rw Enumeration .1.3.6.1.4.1.1229.2.42.5.1.6 |
ipsecAddrTmplNumberThis parameter specifies the number of available IPsec address
templates.ro INTEGER .1.3.6.1.4.1.1229.2.42.6 |
ipsecAddrTmplTableThis object specifies a table containing a list of IPsec address
templates entries. The number of entries is given by the value of
ipsecAddrTmplNumber. SEQUENCE OF IPsecAddrTmplEntry .1.3.6.1.4.1.1229.2.42.7 |
ipsecAddrTmplEntryParameters regarding to IPsec address Templates. IPsecAddrTmplEntry .1.3.6.1.4.1.1229.2.42.7.1 |
ipsecAddrTmplIndexThis object contains the index of the table being a
unique value for each IPsec address templtes. Its value
ranges between 1 and the value of ipsecAddrTmplNumber.ro INTEGER .1.3.6.1.4.1.1229.2.42.7.1.1 |
ipsecAddrTmplNameIPsec address templates name.rw DisplayString .1.3.6.1.4.1.1229.2.42.7.1.2 |
ipsecAddrTmplRemoteIPv4IPsec address templates remote ip address (IPv4).rw DisplayString .1.3.6.1.4.1.1229.2.42.7.1.3 |
ipsecAddrTmplLocalIPv6IPsec address templates local ip address (IPv6).rw DisplayString .1.3.6.1.4.1.1229.2.42.7.1.4 |
ipsecAddrTmplRemoteIPv6IPsec address templates remote ip address (IPv6).rw DisplayString .1.3.6.1.4.1.1229.2.42.7.1.5 |
ipsecServTmplNumberThis parameter specifies the number of available IPsec service
templates.ro INTEGER .1.3.6.1.4.1.1229.2.42.8 |
ipsecServTmplTableThis object specifies a table containing a list of IPsec service
templates entries. The number of entries is given by the value of
ipsecServTmplNumber. SEQUENCE OF IPsecServTmplEntry .1.3.6.1.4.1.1229.2.42.9 |
ipsecServTmplEntryParameters regarding to IPsec service Templates. IPsecServTmplEntry .1.3.6.1.4.1.1229.2.42.9.1 |
ipsecServTmplIndexThis object contains the index of the table being a
unique value for each IPsec service templtes. Its value
ranges between 1 and the value of ipsecServTmplNumber.ro INTEGER .1.3.6.1.4.1.1229.2.42.9.1.1 |
ipsecServTmplNameIPsec services templates name.rw DisplayString .1.3.6.1.4.1.1229.2.42.9.1.2 |
ipsecServTmplServIPsec services - multi-choice of
ALL
FTP
IPP
LPR
ICMP
SNMP
Socketprinting
ThinPrint
HTTP
SNTPrw DisplayString .1.3.6.1.4.1.1229.2.42.9.1.3 |
ipsecSATmplNumberThis parameter specifies the number of available IPsec SA
(Security association) templates.ro INTEGER .1.3.6.1.4.1.1229.2.42.10 |
ipsecSATmplTableThis object specifies a table containing a list of IPsec SA
templates entries. The number of entries is given by the value of
ipsecSATmplNumber. SEQUENCE OF IPsecSATmplEntry .1.3.6.1.4.1.1229.2.42.11 |
ipsecSATmplEntryParameters regarding to IPsec Templates SA. IPsecSATmplEntry .1.3.6.1.4.1.1229.2.42.11.1 |
ipsecSATmplIndexThis object contains the index of the table being a
unique value for each IPsec SA templtes. Its value
ranges between 1 and the value of ipsecSATmplNumber.ro INTEGER .1.3.6.1.4.1.1229.2.42.11.1.1 |
ipsecSATmplNameIPsec SA templates name.rw DisplayString .1.3.6.1.4.1.1229.2.42.11.1.2 |
ipsecSATmplCertThis parameter specifies the certification type of the IPsec
SA template.rw Enumeration .1.3.6.1.4.1.1229.2.42.11.1.3 |
ipsecSATmplVeriThis parameter enables or disables the certification verify
of the IPsec SA template.rw Enumeration .1.3.6.1.4.1.1229.2.42.11.1.4 |
ipsecSATmplPSKThis parameter specifies the Pre-Shared Key of the IPsec
SA template..rw DisplayString .1.3.6.1.4.1.1229.2.42.11.1.5 |
ipsecSATmplIKEThis parameter specifies the IKE template number
of the SA template.rw Enumeration .1.3.6.1.4.1.1229.2.42.11.1.6 |
ipsecIKETmplNumberThis parameter specifies the number of available IPsec IKE
(IPsec key exchange) templates.ro INTEGER .1.3.6.1.4.1.1229.2.42.12 |
ipsecIKETmplTableThis object specifies a table containing a list of IPsec IKE
templates entries. The number of entries is given by the value of
ipsecIKETmplNumber. SEQUENCE OF IPsecIKETmplEntry .1.3.6.1.4.1.1229.2.42.13 |
ipsecIKETmplEntryParameters regarding to IPsec IKE templates. IPsecIKETmplEntry .1.3.6.1.4.1.1229.2.42.13.1 |
ipsecIKETmplIndexThis object contains the index of the table being a
unique value for each IKE templtes. Its value ranges
between 1 and the value of ipsecIKETmplNumber.ro INTEGER .1.3.6.1.4.1.1229.2.42.13.1.1 |
ipsecIKETmplNameIKE templates name.rw DisplayString .1.3.6.1.4.1.1229.2.42.13.1.2 |
ipsecIKETmplModesIKE templates neogotiation modes - multi-choice of
MAIN and AGGRESSIVE.rw DisplayString .1.3.6.1.4.1.1229.2.42.13.1.3 |
ipsecIKETmplDhGroupThis parameter specifies the Diffie-Hellman group of the
Phase 1 for the IKE template .rw Enumeration .1.3.6.1.4.1.1229.2.42.13.1.4 |
ipsecIKETmplEncV1This parameter specifies the encryption algorithm of the
Phase 1 for the IKE template.rw Enumeration .1.3.6.1.4.1.1229.2.42.13.1.5 |
ipsecIKETmplAuthV1This parameter specifies the Hash algorithm of the
Phase 1 for the IKE template.rw Enumeration .1.3.6.1.4.1.1229.2.42.13.1.6 |
ipsecIKETmplLtV1This parameter specifies the lifetime of the
Phase 1 for the IKE template.rw DisplayString .1.3.6.1.4.1.1229.2.42.13.1.7 |
ipsecIKETmplEncModeThis parameter specifies the encapsulation type of the
Phase 2 for the IKE template.rw Enumeration .1.3.6.1.4.1.1229.2.42.13.1.8 |
ipsecIKETmplPfsGroupThis parameter specifies the Diffie-Hellman group of the
Phase 2 for the IKE template.rw Enumeration .1.3.6.1.4.1.1229.2.42.13.1.9 |
ipsecIKETmplEncV2This parameter specifies the encryption algorithms of the
Phase 2 for the IKE template. - multi-choice of
3des
des
aes
cast-128
des64
des32
rc5
rc4
idea
3idea
or none.rw DisplayString .1.3.6.1.4.1.1229.2.42.13.1.10 |
ipsecIKETmplAuthV2This parameter specifies the Authentication algorithms of the
Phase 2 for the IKE template. - multi-choice of
md5
sha1
sha256
sha384
sha512
des
3des
des64
des32
none.rw DisplayString .1.3.6.1.4.1.1229.2.42.13.1.11 |
ipsecIKETmplAHThis parameter specifies to use the AH protocol
of the IPsec SA template or not.rw Enumeration .1.3.6.1.4.1.1229.2.42.13.1.12 |
ipsecIKETmplLtV2This parameter specifies the lifetime of the
Phase 2 for the IKE template.rw DisplayString .1.3.6.1.4.1.1229.2.42.13.1.13 |
ipsecIKETmplLtKbThis parameter specifies the lifetime (kbyte) of the
Phase 2 for the IKE template.rw DisplayString .1.3.6.1.4.1.1229.2.42.13.1.14 |
ipsecDHCPThis parameter allows or doesn't allow the broadcast DHCPv4/BootP
for the services selected to bypass the IPsec policies.rw Enumeration .1.3.6.1.4.1.1229.2.42.14 |
ipsecNetbiosThis parameter allows or doesn't allow the broadcast Netbios
for the services selected to bypass the IPsec policies.rw Enumeration .1.3.6.1.4.1.1229.2.42.15 |
ipsecBonjourThis parameter allows or doesn't allow the multicast Bonjour
for the services selected to bypass the IPsec policies.rw Enumeration .1.3.6.1.4.1.1229.2.42.16 |
ipsecSLPThis parameter allows or doesn't allow the multicast SLP
for the services selected to bypass the IPsec policies.rw Enumeration .1.3.6.1.4.1.1229.2.42.17 |
ipsecFTPThis parameter allows or doesn't allow IPsec for the ftp protocol.rw Enumeration .1.3.6.1.4.1.1229.2.42.18 |
ipsecTestThis parameter enables the IPsec test mode.rw Enumeration .1.3.6.1.4.1.1229.2.42.19 |
sehIpVLan OBJECT IDENTIFIER .1.3.6.1.4.1.1229.2.43 |
ip4VLanNumberNumber of entries in the Ip VLan table.ro INTEGER .1.3.6.1.4.1.1229.2.43.1 |
ip4VLanTableThis object specifies a table containing IP filter descriptions. SEQUENCE OF Ip4VLanEntryType .1.3.6.1.4.1.1229.2.43.2 |
ip4VLanEntryEntry of Ip4 VLan table. Ip4VLanEntryType .1.3.6.1.4.1.1229.2.43.2.1 |
ip4VLanIndexThis object contains the index of the table being a
unique value for each IP vlan address. INTEGER .1.3.6.1.4.1.1229.2.43.2.1.1 |
ip4VLanOnOffThis parameter specifies wether the vlan address is active or not.rw Enumeration .1.3.6.1.4.1.1229.2.43.2.1.2 |
ip4VLanAddrThis parameter specifies the Ip vlan address.rw DisplayString .1.3.6.1.4.1.1229.2.43.2.1.3 |
ip4VLanMaskThis parameter specifies the Ip mask for the vlan address.rw DisplayString .1.3.6.1.4.1.1229.2.43.2.1.4 |
ip4VLanIDThis object contains the VLan ID for this VLan.rw INTEGER .1.3.6.1.4.1.1229.2.43.2.1.5 |
ip4VLanGateThis parameter specifies the Ip gate for the vlan address.rw DisplayString .1.3.6.1.4.1.1229.2.43.2.1.6 |
ip4VLanWebObsolete - This parameter enables or disables Web access through vlan ports.rw Enumeration .1.3.6.1.4.1.1229.2.43.3 |
ip4VLanSNMPObsolete - This parameter enables or disables Snmp access through vlan ports.rw Enumeration .1.3.6.1.4.1.1229.2.43.4 |
ip4VLanMgmtThis parameter enables or disables management access for all other vlans.rw Enumeration .1.3.6.1.4.1.1229.2.43.10 |
ip4VLanMgmtIDThis object contains the VLan ID for the management VLan.rw INTEGER .1.3.6.1.4.1.1229.2.43.11 |
ip4VLanMgmtAnyThis parameter enables or disables management access for all other vlans.rw Enumeration .1.3.6.1.4.1.1229.2.43.12 |
ip4VLanMgmtUntagThis parameter enables or disables management access from unttaged lan beside VLan access.rw Enumeration .1.3.6.1.4.1.1229.2.43.13 |
sehUtn OBJECT IDENTIFIER .1.3.6.1.4.1.1229.2.50 |
utnPortNumberNumber of entries in the UTN port table.ro INTEGER .1.3.6.1.4.1.1229.2.50.1 |
utnPortTableThis object specifies a table containing UTN port descriptions. SEQUENCE OF UtnPortEntry .1.3.6.1.4.1.1229.2.50.2 |
utnPortEntryEntry of UTN port table. UtnPortEntry .1.3.6.1.4.1.1229.2.50.2.1 |
utnPortIndexThis object contains the index of the table being a
unique value for each UTN port entry. INTEGER .1.3.6.1.4.1.1229.2.50.2.1.1 |
utnPortSecureThis parameter enables/disables the myUTN USB encryption.rw Enumeration .1.3.6.1.4.1.1229.2.50.2.1.2 |
utnPortPoSwitchThis parameter enables/disables the myUTN USB power cycle switch.rw Enumeration .1.3.6.1.4.1.1229.2.50.2.1.3 |
utnPortPoOffDuraThis parameter specifies the UTN USB port power off duration in 1/10 seconds.rw INTEGER .1.3.6.1.4.1.1229.2.50.2.1.4 |
utnPortAccCtrlThis parameter specifies the UTN USB port power off duration in 1/100 seconds.rw Enumeration .1.3.6.1.4.1.1229.2.50.2.1.5 |
utnPortKeyValThis parameter specifies the UTN USB port access key.rw DisplayString .1.3.6.1.4.1.1229.2.50.2.1.6 |
utnPortProdIdThis parameter specifies the UTN USB port product id for access control.rw DisplayString .1.3.6.1.4.1.1229.2.50.2.1.7 |
utnPortVendIdThis parameter specifies the UTN USB port vendor id for access control.rw DisplayString .1.3.6.1.4.1.1229.2.50.2.1.8 |
utnPortIp4VlanThis parameter specifies the UTN USB port to VLan binding.
'0' means any VLan is aloud; a value higher than the physical
USB port count means no VLan is aloud.rw INTEGER .1.3.6.1.4.1.1229.2.50.2.1.9 |
utnPortTagThis parameter specifies the UTN USB port short description string.rw DisplayString .1.3.6.1.4.1.1229.2.50.2.1.10 |
utnPortCompThis parameter enables the UTN data compression for this port.rw Enumeration .1.3.6.1.4.1.1229.2.50.2.1.11 |
utnPortUsbManuThis parameter specifies the UTN USB connected device manufacturer stringro DisplayString .1.3.6.1.4.1.1229.2.50.2.1.21 |
utnPortUsbProdThis parameter specifies the UTN USB connected device product stringro DisplayString .1.3.6.1.4.1.1229.2.50.2.1.22 |
utnPortUsbVendIdThis parameter specifies the UTN USB connected device vendor idro DisplayString .1.3.6.1.4.1.1229.2.50.2.1.23 |
utnPortUsbProdIdThis parameter specifies the UTN USB connected device product idro DisplayString .1.3.6.1.4.1.1229.2.50.2.1.24 |
utnPortUsbSerThis parameter specifies the UTN USB connected device serial stringro DisplayString .1.3.6.1.4.1.1229.2.50.2.1.25 |
utnPortUsbOwnThis parameter specifies the UTN USB device connection statusro DisplayString .1.3.6.1.4.1.1229.2.50.2.1.26 |
utnPortSlotThis parameter specifies the UTN slot number the USB is attached to.rw INTEGER .1.3.6.1.4.1.1229.2.50.2.1.27 |
utnDispDefDefault 2 chars for the myUTN-800 dispayrw DisplayString .1.3.6.1.4.1.1229.2.50.11 |
utnDispErValsCurrent myUTN-800 dispay error value(s)ro DisplayString .1.3.6.1.4.1.1229.2.50.12 |
utnBeepPwrmyTUN-800 buzzer mode, beep if only one supply worksrw Enumeration .1.3.6.1.4.1.1229.2.50.13 |
utnBeepSDcmyTUN-800 buzzer mode, beep if SDCard doesn't workrw Enumeration .1.3.6.1.4.1.1229.2.50.14 |
utnHidmyTUN accept (on) or discard (off) HID devicesrw Enumeration .1.3.6.1.4.1.1229.2.50.15 |
utnRelayOnswitch the relay on or off if not event drivenrw Enumeration .1.3.6.1.4.1.1229.2.50.16 |
utnRelayFixswitch if the relay state is fixed or event dependendrw Enumeration .1.3.6.1.4.1.1229.2.50.17 |
utnRelayEvesbitfield represents the relay related occured eventsro Bits .1.3.6.1.4.1.1229.2.50.18 |
utnRelayRestartset event trigger for the relay to restart of devicerw Enumeration .1.3.6.1.4.1.1229.2.50.21 |
utnRelay1Pwrset event trigger for the relay to the first power supplyrw Enumeration .1.3.6.1.4.1.1229.2.50.22 |
utnRelay2Pwrset event trigger for the relay to the second power supplyrw Enumeration .1.3.6.1.4.1.1229.2.50.23 |
utnRelayNetset event trigger for the relay to the network link staterw Enumeration .1.3.6.1.4.1.1229.2.50.24 |
utnRelaySDCardset event trigger for the relay to the SDCard staterw Enumeration .1.3.6.1.4.1.1229.2.50.25 |
utnRelayUsbConset event trigger for the relay to the USB connect eventrw Enumeration .1.3.6.1.4.1.1229.2.50.26 |
utnRelayUsbDiscoset event trigger for the relay to the USB disconnect eventrw Enumeration .1.3.6.1.4.1.1229.2.50.27 |
utnRelayUsbActivateset event trigger for the relay to the USB activate eventrw Enumeration .1.3.6.1.4.1.1229.2.50.28 |
utnRelayUsbDeActivateset event trigger for the relay to the USB deactivate eventrw Enumeration .1.3.6.1.4.1.1229.2.50.29 |
utnRelayCtrlreplaces utnRelayFix, set wether the relay is fix or driven by event or status changesrw Enumeration .1.3.6.1.4.1.1229.2.50.40 |
utnRelayStateNetset state trigger for the relay to the network link staterw Enumeration .1.3.6.1.4.1.1229.2.50.44 |
utnRelayStateUsbConset state trigger for the relay to the USB connect eventrw Enumeration .1.3.6.1.4.1.1229.2.50.46 |
utnRelayStateUsbDiscoset state trigger for the relay to the USB disconnect eventrw Enumeration .1.3.6.1.4.1.1229.2.50.47 |
utnRelayStateUsbActivateswitch how the relay state dependends on the USB activate eventrw Enumeration .1.3.6.1.4.1.1229.2.50.48 |
utnRelayStateUsbDeActivateswitch how the relay state dependends on the USB deactivate eventrw Enumeration .1.3.6.1.4.1.1229.2.50.49 |
sehUtnEvent OBJECT IDENTIFIER .1.3.6.1.4.1.1229.2.51 |
utnEventTypeThis is the type of a utn event Enumeration .1.3.6.1.4.1.1229.2.51.1 |
utnEventPortThis is the event related port number starting by 1. INTEGER .1.3.6.1.4.1.1229.2.51.2 |
utnEventMsgThis is a readable event message. DisplayString .1.3.6.1.4.1.1229.2.51.3 |
utnEventManuThis is usb manufacturer string for a recently occurred event. DisplayString .1.3.6.1.4.1.1229.2.51.4 |
utnEventManuIdThis is the event related manufacturer id INTEGER .1.3.6.1.4.1.1229.2.51.5 |
utnEventProdThis is usb product string for a recently occurred event. DisplayString .1.3.6.1.4.1.1229.2.51.6 |
utnEventProdIdThis is the event related product id INTEGER .1.3.6.1.4.1.1229.2.51.7 |
utnEventSerialThis is usb serial string for a recently occurred event. DisplayString .1.3.6.1.4.1.1229.2.51.8 |
tniEventCardThis is latest seen nfc card data. DisplayString .1.3.6.1.4.1.1229.2.51.9 |
sehSnd OBJECT IDENTIFIER .1.3.6.1.4.1.1229.10 |
sehSndUser OBJECT IDENTIFIER .1.3.6.1.4.1.1229.10.1 |
sndUserNumberNumber of entries in the SND user table.ro INTEGER .1.3.6.1.4.1.1229.10.1.1 |
sndUserTableThis object specifies a table containing SND user descriptions. SEQUENCE OF SndUserEntry .1.3.6.1.4.1.1229.10.1.2 |
sndUserEntryEntry of SND user table. SndUserEntry .1.3.6.1.4.1.1229.10.1.2.1 |
sndUserIndexThis object contains the index of the table being a
unique value for each SND user entry. INTEGER .1.3.6.1.4.1.1229.10.1.2.1.1 |
sndUserActiveThis parameter enables/disables this mySND user account.rw Enumeration .1.3.6.1.4.1.1229.10.1.2.1.2 |
sndUserNameThis is the SND login user name.rw DisplayString .1.3.6.1.4.1.1229.10.1.2.1.3 |
sndUserPwdThis is the SND login user password.rw DisplayString .1.3.6.1.4.1.1229.10.1.2.1.4 |
sndUserEmailThis is the SND user email address.rw DisplayString .1.3.6.1.4.1.1229.10.1.2.1.5 |
sndUserFFilterThis is the SND user related file filter referenced by his index.rw INTEGER .1.3.6.1.4.1.1229.10.1.2.1.6 |
sndUserRAdmThis parameter enables the user to administrate the device.rw Enumeration .1.3.6.1.4.1.1229.10.1.2.1.7 |
sndUserRDLoadThis parameter switches the user right to download files from the device.rw Enumeration .1.3.6.1.4.1.1229.10.1.2.1.8 |
sndUserRSendThis parameter switches the user right to send files by email from this device.rw Enumeration .1.3.6.1.4.1.1229.10.1.2.1.9 |
sndUserRToggThis parameter switches the user right to toggle files archive flags .rw Enumeration .1.3.6.1.4.1.1229.10.1.2.1.10 |
sndUserRWrtThis parameter gives the user write access to the connected media.rw Enumeration .1.3.6.1.4.1.1229.10.1.2.1.11 |
sehSndSender OBJECT IDENTIFIER .1.3.6.1.4.1.1229.10.2 |
sndSendMaxFilesThis is a max number of files attached with outgoing emails.rw INTEGER .1.3.6.1.4.1.1229.10.2.1 |
sndSendMaxKbThis is a size limit in kb for outgoing emails.rw INTEGER .1.3.6.1.4.1.1229.10.2.2 |
sndSenderPDMediaThis parameter switches the auto send functionality for the PenDrive media.rw Enumeration .1.3.6.1.4.1.1229.10.2.3 |
sndSenderPDDirThis is the SND autosend PenDrive directory.rw DisplayString .1.3.6.1.4.1.1229.10.2.4 |
sndSenderPDExtThis is the SND autosend PenDrive file extension filter.rw DisplayString .1.3.6.1.4.1.1229.10.2.5 |
sndSenderPDaBitThis parameter defines the action for e file after sucessfully sending it.rw Enumeration .1.3.6.1.4.1.1229.10.2.6 |
sndSenderPDRcpNumNumber of email recipients for PenDrive auto send.ro INTEGER .1.3.6.1.4.1.1229.10.2.7 |
sndSenderPDRcpTableThis object specifies the table of SND PenDrive email recipients. SEQUENCE OF SndSenderPDRcpEntry .1.3.6.1.4.1.1229.10.2.8 |
sndSenderPDRcpEntryEntry of SND user table. SndSenderPDRcpEntry .1.3.6.1.4.1.1229.10.2.8.1 |
sndPDRcpIndexThis object contains the index of the table being a
unique value for each SND PenDrive recipient entry. INTEGER .1.3.6.1.4.1.1229.10.2.8.1.1 |
sndPDRcpEmailThis is the SND PendDrive recipients email address.rw DisplayString .1.3.6.1.4.1.1229.10.2.8.1.2 |
sndSenderSDActiveThis parameter switches the following SDRcp email off/on.rw Enumeration .1.3.6.1.4.1.1229.10.2.20 |
sndSenderSDRcpThis is the SND SDCard recipient email address for any card IDs.rw DisplayString .1.3.6.1.4.1.1229.10.2.21 |
sndSenderSDNumNumber of SndSender table entries.ro INTEGER .1.3.6.1.4.1.1229.10.2.30 |
sndSenderSDTableThis object specifies the table of SND SDCard specific parameters. SEQUENCE OF SndSenderSDEntry .1.3.6.1.4.1.1229.10.2.31 |
sndSenderSDEntryEntry of SND SDCard table. SndSenderSDEntry .1.3.6.1.4.1.1229.10.2.31.1 |
sndSDIndexThis object contains the index of the table being a
unique value for each SND SDCard entry. INTEGER .1.3.6.1.4.1.1229.10.2.31.1.1 |
sndSDMediaThis parameter switches the auto send functionality for the SDCard media.rw Enumeration .1.3.6.1.4.1.1229.10.2.31.1.2 |
sndSDDirThis is the SND PendDrive recipients email address.rw DisplayString .1.3.6.1.4.1.1229.10.2.31.1.3 |
sndSDExtThis is the SND autosend SDCard file extension filter.rw DisplayString .1.3.6.1.4.1.1229.10.2.31.1.4 |
sndSDaBitThis parameter defines the action for file on a SDCard after sucessfully sending it.rw Enumeration .1.3.6.1.4.1.1229.10.2.31.1.5 |
sehSndFFilter OBJECT IDENTIFIER .1.3.6.1.4.1.1229.10.3 |
sndFFilterNumNumber of email recipients for PenDrive auto send.ro INTEGER .1.3.6.1.4.1.1229.10.3.1 |
sndFFilterTableThis object specifies the table of SND PenDrive email recipients. SEQUENCE OF SndFFilterEntry .1.3.6.1.4.1.1229.10.3.2 |
sndFFilterEntryEntry of SND user table. SndFFilterEntry .1.3.6.1.4.1.1229.10.3.2.1 |
sndFFilterIndexThis object contains the index of the table being a
unique value for each SND PenDrive recipient entry. INTEGER .1.3.6.1.4.1.1229.10.3.2.1.1 |
sndFFilterNameThis is the SND file filter name.rw DisplayString .1.3.6.1.4.1.1229.10.3.2.1.2 |
sndFFilterThis is the SND file filter, a comma separated list of allowed extensions.rw DisplayString .1.3.6.1.4.1.1229.10.3.2.1.3 |
sehSndSDCard OBJECT IDENTIFIER .1.3.6.1.4.1.1229.10.4 |
sndSDCardNumNumber of SDCard parameter sets.ro INTEGER .1.3.6.1.4.1.1229.10.4.1 |
sndSDCardTableThis object specifies the table of SND SDCard parameters. SEQUENCE OF SndSDCardEntry .1.3.6.1.4.1.1229.10.4.2 |
sndSDCardEntryEntry of SND SCard table. SndSDCardEntry .1.3.6.1.4.1.1229.10.4.2.1 |
sndSDCardIndexThis object contains the index of the table being a
unique value for each SDCard entry. INTEGER .1.3.6.1.4.1.1229.10.4.2.1.1 |
sndSDCardCidThis is the SND stored SDCard CID as 32byte hex string plus zero C-terminator.ro DisplayString .1.3.6.1.4.1.1229.10.4.2.1.2 |
sndSDCardNameThis is the SND SDCard name.rw DisplayString .1.3.6.1.4.1.1229.10.4.2.1.3 |
sndSDCardUListThis is the SDCrad user list, a comma separated list of user indices.rw DisplayString .1.3.6.1.4.1.1229.10.4.2.1.4 |
sndSDCardARcpThis is the SND SDCard auto send recipients email address.rw DisplayString .1.3.6.1.4.1.1229.10.4.2.1.5 |
sndPDPortThis parameter switches SND USB PenDrive port off or onrw Enumeration .1.3.6.1.4.1.1229.10.10 |
sehPPS OBJECT IDENTIFIER .1.3.6.1.4.1.1229.11 |
ppsThis parameter switches PPS off or on.rw Enumeration .1.3.6.1.4.1.1229.11.1 |
ppsPINThis is the PPS User-PIN.rw DisplayString .1.3.6.1.4.1.1229.11.2 |
ppsPrtIdThis is the Personal Printing printer ID.rw DisplayString .1.3.6.1.4.1.1229.11.3 |
ppsDeleteThis parameter selects who has finally to delete a print job.rw Enumeration .1.3.6.1.4.1.1229.11.4 |
ppsDelelteDelayThis is the delay in seconds for the tpr to sends the delete job command after completition.rw INTEGER .1.3.6.1.4.1.1229.11.5 |
ppsSingleThis parameter switches the feature one job per card on or off.rw Enumeration .1.3.6.1.4.1.1229.11.6 |
ppsBeepThis parameter switches TPR beeper on or off.rw Enumeration .1.3.6.1.4.1.1229.11.7 |
ppsUSRFormThis parameter decides which type of USR hex value format is used.rw Enumeration .1.3.6.1.4.1.1229.11.8 |
ppsPWDThis is the PPS user password.rw DisplayString .1.3.6.1.4.1.1229.11.9 |
ppsPortThis parameter specifies the local PPS port.rw INTEGER .1.3.6.1.4.1.1229.11.10 |
ppsSSLThis parameter switches SSL for the PPS server TCP connection on or off.rw Enumeration .1.3.6.1.4.1.1229.11.11 |
ppsVerifyThis parameter switches the ssl verification of the PPS server on or off.rw Enumeration .1.3.6.1.4.1.1229.11.12 |
ppsServerThis is the main PPS server name.rw DisplayString .1.3.6.1.4.1.1229.11.20 |
ppsServerAltThis is the alternativ PPS server name.rw DisplayString .1.3.6.1.4.1.1229.11.21 |
ppsNumberThis parameter specifies the number of available PPS server gateway entriesro INTEGER .1.3.6.1.4.1.1229.11.30 |
ppsTableThis object specifies a table containing a list of ThinPrint gateway
entries. The number of entries is given by the value of tpgNumber. SEQUENCE OF PPSEntry .1.3.6.1.4.1.1229.11.31 |
ppsEntryParameters regarding to PPS server entry. PPSEntry .1.3.6.1.4.1.1229.11.31.1 |
pps-IndexThis object contains the index of the table being a
unique value for each PPS server. Its value
ranges between 1 and the value of ppsNumber.ro INTEGER .1.3.6.1.4.1.1229.11.31.1.1 |
pps-OnThis parameter switches this PPS server configuration on or off.rw Enumeration .1.3.6.1.4.1.1229.11.31.1.2 |
pps-ServerThis is the name of this PPS server.rw DisplayString .1.3.6.1.4.1.1229.11.31.1.3 |
pps-PINThis is the PPS User-PIN of this PPS server.rw DisplayString .1.3.6.1.4.1.1229.11.31.1.4 |
pps-PWDThis is the PPS user password of this PPS server.rw DisplayString .1.3.6.1.4.1.1229.11.31.1.5 |
pps-PortThis parameter specifies the local
PPS port of this PPS server.rw INTEGER .1.3.6.1.4.1.1229.11.31.1.6 |
pps-SSLThis parameter switches SSL for this PPS server
TCP connection on or off.rw Enumeration .1.3.6.1.4.1.1229.11.31.1.7 |
pps-VerifyThis parameter switches the ssl verification of this
PPS server on or off.rw Enumeration .1.3.6.1.4.1.1229.11.31.1.8 |
pps-PrtIdThis is the Personal Printing printer ID of this PPS server.rw DisplayString .1.3.6.1.4.1.1229.11.31.1.9 |
pps-DeleteThis parameter selects who has finally to
delete the print job on this PPS server.rw Enumeration .1.3.6.1.4.1.1229.11.31.1.10 |
pps-DelelteDelayThis is the delay in seconds for the tpr to sends the
delete job command after completition.rw INTEGER .1.3.6.1.4.1.1229.11.31.1.11 |
sehTSE OBJECT IDENTIFIER .1.3.6.1.4.1.1229.12 |
tseNumberThis parameter specifies the number of available TSE device entriesro INTEGER .1.3.6.1.4.1.1229.12.1 |
tseTableThis object specifies a table containing a list of TSE device entries.
The number of entries is given by the value of tseNumber. SEQUENCE OF TSEEntry .1.3.6.1.4.1.1229.12.2 |
tseEntryParameters regarding to TSE device entry. TSEEntry .1.3.6.1.4.1.1229.12.2.1 |
tse-IndexThis object contains the index of the table being a
unique value for each TSE device. Its value
ranges between 1 and the value of tseNumber.ro INTEGER .1.3.6.1.4.1.1229.12.2.1.1 |