SCC-SW-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for SCC-SW-MIB.
99
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
99 total| Object Name |
|---|
swColdStartA coldStart trap signifies that the sending
protocol entity is reinitializing itself such
that the agent's configuration or the rotocol
entity implementation may be altered. TRAP-TYPE .1.3.6.1.4.1.1573.2.1.0.0 |
swAuthenticationFailureAn authenticationFailure trap signifies that
the sending protocol entity is the addressee
of a protocol message that is not properly
authenticated. While implementations of the
SNMP must be capable of generating this trap,
they must also be capable of suppressing the
emission of such traps via an implementation-
specific mechanism. TRAP-TYPE .1.3.6.1.4.1.1573.2.1.0.4 |
swNetTrafficThresholdsThe trap occurs when the number of traffix audit
events written by the various proxies going
through the Sidewinder exceeds a specified
number in a specified time period. TRAP-TYPE .1.3.6.1.4.1.1573.2.1.0.201 |
swAttackAttemptThe trap occurs when one of the services on the
Sidewinder sees a suspecious occurrence. TRAP-TYPE .1.3.6.1.4.1.1573.2.1.0.202 |
swTeViolationThe trap occurs when an unauthorizeduser tries
to read, write, or execute a protected file on
the Sidewinder. TRAP-TYPE .1.3.6.1.4.1.1573.2.1.0.203 |
swAclThresholdsThe trap occurs when the number of times users
are denied access to services exceeds a
specified number. TRAP-TYPE .1.3.6.1.4.1.1573.2.1.0.204 |
swBadProxyAuthThe trap occurs when a user tries to get
authenticated to the telnet or FTP proxy and he
or she enters invalid data. TRAP-TYPE .1.3.6.1.4.1.1573.2.1.0.205 |
swNetProbeAttemptThe trap occurs when a user try to connect or
send a message to a TCP or UDP port that either
has no service associated with it of is
associated with an unsupported service. TRAP-TYPE .1.3.6.1.4.1.1573.2.1.0.206 |
swMailFilterFailureThe trap occurs when the number of mail messages
that failed the filter exceeds a specified
threshold in a specified time period. TRAP-TYPE .1.3.6.1.4.1.1573.2.1.0.207 |
swIPSECFailureThe trap occurs when the IPSEC subsystem
detects a failure in authentication or
encryption of network traffic. This can be
caused by a number of things ranging from
key configuration errors, ISAKMP problems,
interoperability issues, and network attacks. TRAP-TYPE .1.3.6.1.4.1.1573.2.1.0.208 |
swFAILOVEREventThe trap occurs when failover events occur.
These events include a master starting,
a slave becoming a master or releasing control,
or possible failover errors. TRAP-TYPE .1.3.6.1.4.1.1573.2.1.0.209 |
swProxy OBJECT IDENTIFIER .1.3.6.1.4.1.1573.3.1.5 |
RFC1155-SMI Unknown .1.3.6.1.4.1.1573.3.1.5 |
swProxyTableA list of proxy entries. SEQUENCE OF SwProxyEntry .1.3.6.1.4.1.1573.3.1.5.1 |
swProxyEntryAn entry containing objects of a proxy. SwProxyEntry .1.3.6.1.4.1.1573.3.1.5.1.1 |
swProxyIndexThe index of a proxy entry in the proxy table.ro INTEGER .1.3.6.1.4.1.1573.3.1.5.1.1.1 |
swProxyNameThe name of a proxy.ro DisplayString .1.3.6.1.4.1.1573.3.1.5.1.1.2 |
swProxyAdminStatusThe configured status of a proxy.ro Enumeration .1.3.6.1.4.1.1573.3.1.5.1.1.3 |
swProxyOperStatusThe current operational status of a proxy.ro Enumeration .1.3.6.1.4.1.1573.3.1.5.1.1.4 |
swBurb OBJECT IDENTIFIER .1.3.6.1.4.1.1573.3.1.6 |
swBurbTotalThe total number of configured Burbs.ro INTEGER .1.3.6.1.4.1.1573.3.1.6.1 |
swBurbViewTableA list of burb view community name entries. SEQUENCE OF SwBurbViewEntry .1.3.6.1.4.1.1573.3.1.6.2 |
swBurbViewEntryAn entry containing objects of a burb view. SwBurbViewEntry .1.3.6.1.4.1.1573.3.1.6.2.1 |
swBurbIndexThe Burb Index.ro INTEGER .1.3.6.1.4.1.1573.3.1.6.2.1.1 |
swBurbViewNameCommunity name for the viewing the burb related
information.ro DisplayString .1.3.6.1.4.1.1573.3.1.6.2.1.2 |
swBurbedMib2 OBJECT IDENTIFIER .1.3.6.1.4.1.1573.3.1.7 |
swInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.1573.3.1.7.1 |
swIfNumberThe number of network interfaces (regardless of
their current state) present on this system.ro INTEGER .1.3.6.1.4.1.1573.3.1.7.1.1 |
swIfTableA list of interface entries. The number of
entries is given by the value of ifNumber. SEQUENCE OF SwIfEntry .1.3.6.1.4.1.1573.3.1.7.1.2 |
swIfEntryAn interface entry containing objects at the
subnetwork layer and below for a particular
interface. SwIfEntry .1.3.6.1.4.1.1573.3.1.7.1.2.1 |
swIfIndexA unique value for each interface. Its value
ranges between 1 and the value of ifNumber. The
value for each interface must remain constant at
least from one re-initialization of the entity's
network management system to the next re-
initialization.ro INTEGER .1.3.6.1.4.1.1573.3.1.7.1.2.1.1 |
swIfDescrA textual string containing information about the
interface. This string should include the name of
the manufacturer, the product name and the version
of the hardware interface.ro DisplayString .1.3.6.1.4.1.1573.3.1.7.1.2.1.2 |
swIfTypeThe type of interface, distinguished according to
the physical/link protocol(s) immediately `below'
the network layer in the protocol stack.ro Enumeration .1.3.6.1.4.1.1573.3.1.7.1.2.1.3 |
swIfMtuThe size of the largest datagram which can be
sent/received on the interface, specified in
octets. For interfaces that are used for
transmitting network datagrams, this is the size
of the largest network datagram that can be sent
on the interface.ro INTEGER .1.3.6.1.4.1.1573.3.1.7.1.2.1.4 |
swIfSpeedAn estimate of the interface's current bandwidth
in bits per second. For interfaces which do not
vary in bandwidth or for those where no accurate
estimation can be made, this object should contain
the nominal bandwidth.ro Gauge .1.3.6.1.4.1.1573.3.1.7.1.2.1.5 |
swIfPhysAddressThe interface's address at the protocol layer
immediately `below' the network layer in the
protocol stack. For interfaces which do not have
such an address (e.g., a serial line), this object
should contain an octet string of zero length.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.1573.3.1.7.1.2.1.6 |
swIfAdminStatusThe desired state of the interface. The
testing(3) state indicates that no operational
packets can be passed.rw Enumeration .1.3.6.1.4.1.1573.3.1.7.1.2.1.7 |
swIfOperStatusThe current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed.ro Enumeration .1.3.6.1.4.1.1573.3.1.7.1.2.1.8 |
swIfLastChangeThe value of sysUpTime at the time the interface
entered its current operational state. If the
current state was entered prior to the last re-
initialization of the local network management
subsystem, then this object contains a zero
value.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1573.3.1.7.1.2.1.9 |
swIfInOctetsThe total number of octets received on the
interface, including framing characters.ro Counter .1.3.6.1.4.1.1573.3.1.7.1.2.1.10 |
swIfInUcastPktsThe number of subnetwork-unicast packets
delivered to a higher-layer protocol.ro Counter .1.3.6.1.4.1.1573.3.1.7.1.2.1.11 |
swIfInNUcastPktsThe number of non-unicast (i.e., subnetwork-
broadcast or subnetwork-multicast) packets
delivered to a higher-layer protocol.ro Counter .1.3.6.1.4.1.1573.3.1.7.1.2.1.12 |
swIfInDiscardsThe number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for
discarding such a packet could be to free up
buffer space.ro Counter .1.3.6.1.4.1.1573.3.1.7.1.2.1.13 |
swIfInErrorsThe number of inbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol.ro Counter .1.3.6.1.4.1.1573.3.1.7.1.2.1.14 |
swIfInUnknownProtosThe number of packets received via the interface
which were discarded because of an unknown or
unsupported protocol.ro Counter .1.3.6.1.4.1.1573.3.1.7.1.2.1.15 |
swIfOutOctetsThe total number of octets transmitted out of the
interface, including framing characters.ro Counter .1.3.6.1.4.1.1573.3.1.7.1.2.1.16 |
swIfOutUcastPktsThe total number of packets that higher-level
protocols requested be transmitted to a
subnetwork-unicast address, including those that
were discarded or not sent.ro Counter .1.3.6.1.4.1.1573.3.1.7.1.2.1.17 |
swIfOutNUcastPktsThe total number of packets that higher-level
protocols requested be transmitted to a non-
unicast (i.e., a subnetwork-broadcast or
subnetwork-multicast) address, including those
that were discarded or not sent.ro Counter .1.3.6.1.4.1.1573.3.1.7.1.2.1.18 |
swIfOutDiscardsThe number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding such a packet could
be to free up buffer space.ro Counter .1.3.6.1.4.1.1573.3.1.7.1.2.1.19 |
swIfOutErrorsThe number of outbound packets that could not be
transmitted because of errors.ro Counter .1.3.6.1.4.1.1573.3.1.7.1.2.1.20 |
swIfOutQLenThe length of the output packet queue (in
packets).ro Gauge .1.3.6.1.4.1.1573.3.1.7.1.2.1.21 |
swIfSpecificA reference to MIB definitions specific to the
particular media being used to realize the
interface. For example, if the interface is
realized by an ethernet, then the value of this
object refers to a document defining objects
specific to ethernet. If this information is not
present, its value should be set to the OBJECT
IDENTIFIER { 0 0 }, which is a syntatically valid
object identifier, and any conformant
implementation of ASN.1 and BER must be able to
generate and recognize this value.ro OBJECT IDENTIFIER .1.3.6.1.4.1.1573.3.1.7.1.2.1.22 |
swIfBurbIndexA unique value of the Sidewinder suburb index.ro INTEGER -- .1.3.6.1.4.1.1573.3.1.7.1.2.1.23 |
swIp OBJECT IDENTIFIER .1.3.6.1.4.1.1573.3.1.7.2 |
swIpAddrTableThe table of addressing information relevant to
this entity's IP addresses. SEQUENCE OF SwIpAddrEntry .1.3.6.1.4.1.1573.3.1.7.2.1 |
swIpAddrEntryThe addressing information for one of this
entity's IP addresses. SwIpAddrEntry .1.3.6.1.4.1.1573.3.1.7.2.1.1 |
swIpAdEntAddrThe IP address to which this entry's addressing
information pertains.ro IpAddress .1.3.6.1.4.1.1573.3.1.7.2.1.1.1 |
swIpAdEntIfIndexThe index value which uniquely identifies the
interface to which this entry is applicable. The
interface identified by a particular value of this
index is the same interface as identified by the
same value of ifIndex.ro INTEGER .1.3.6.1.4.1.1573.3.1.7.2.1.1.2 |
swIpAdEntNetMaskThe subnet mask associated with the IP address of
this entry. The value of the mask is an IP
address with all the network bits set to 1 and all
the hosts bits set to 0.ro IpAddress .1.3.6.1.4.1.1573.3.1.7.2.1.1.3 |
swIpAdEntBcastAddrThe value of the least-significant bit in the IP
broadcast address used for sending datagrams on
the (logical) interface associated with the IP
address of this entry. For example, when the
Internet standard all-ones broadcast address is
used, the value will be 1. This value applies to
both the subnet and network broadcasts addresses
used by the entity on this (logical) interface.ro INTEGER .1.3.6.1.4.1.1573.3.1.7.2.1.1.4 |
swIpAdEntReasmMaxSizeThe size of the largest IP datagram which this
entity can re-assemble from incoming IP fragmented
datagrams received on this interface.ro INTEGER .1.3.6.1.4.1.1573.3.1.7.2.1.1.5 |
swIpAdEntBurbIndexA unique value of the Sidewinder suburb index.ro INTEGER -- .1.3.6.1.4.1.1573.3.1.7.2.1.1.6 |
swIpRouteTableThis entity's IP Routing table. SEQUENCE OF SwIpRouteEntry .1.3.6.1.4.1.1573.3.1.7.2.2 |
swIpRouteEntryA route to a particular destination. SwIpRouteEntry .1.3.6.1.4.1.1573.3.1.7.2.2.1 |
swIpRouteDestThe destination IP address of this route. An
entry with a value of 0.0.0.0 is considered a
default route. Multiple routes to a single
destination can appear in the table, but access to
such multiple entries is dependent on the table-
access mechanisms defined by the network
management protocol in use.rw IpAddress .1.3.6.1.4.1.1573.3.1.7.2.2.1.1 |
swIpRouteIfIndexThe index value which uniquely identifies the
local interface through which the next hop of this
route should be reached. The interface identified
by a particular value of this index is the same
interface as identified by the same value of
ifIndex.rw INTEGER .1.3.6.1.4.1.1573.3.1.7.2.2.1.2 |
swIpRouteMetric1The primary routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
ipRouteProto value. If this metric is not used,
its value should be set to -1.rw INTEGER .1.3.6.1.4.1.1573.3.1.7.2.2.1.3 |
swIpRouteMetric2An alternate routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
ipRouteProto value. If this metric is not used,
its value should be set to -1.rw INTEGER .1.3.6.1.4.1.1573.3.1.7.2.2.1.4 |
swIpRouteMetric3An alternate routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
ipRouteProto value. If this metric is not used,
its value should be set to -1.rw INTEGER .1.3.6.1.4.1.1573.3.1.7.2.2.1.5 |
swIpRouteMetric4An alternate routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
ipRouteProto value. If this metric is not used,
its value should be set to -1.rw INTEGER .1.3.6.1.4.1.1573.3.1.7.2.2.1.6 |
swIpRouteNextHopThe IP address of the next hop of this route.
(In the case of a route bound to an interface
which is realized via a broadcast media, the value
of this field is the agent's IP address on that
interface.)rw IpAddress .1.3.6.1.4.1.1573.3.1.7.2.2.1.7 |
swIpRouteTypeThe type of route. Note that the values
direct(3) and indirect(4) refer to the notion of
direct and indirect routing in the IP
architecture.
Setting this object to the value invalid(2) has
the effect of invalidating the corresponding entry
in the ipRouteTable object. That is, it
effectively dissasociates the destination
identified with said entry from the route
identified with said entry. It is an
implementation-specific matter as to whether the
agent removes an invalidated entry from the table.
Accordingly, management stations must be prepared
to receive tabular information from agents that
corresponds to entries not currently in use.
Proper interpretation of such entries requires
examination of the relevant ipRouteType object.rw Enumeration .1.3.6.1.4.1.1573.3.1.7.2.2.1.8 |
swIpRouteProtoThe routing mechanism via which this route was
learned. Inclusion of values for gateway routing
protocols is not intended to imply that hosts
should support those protocols.ro Enumeration .1.3.6.1.4.1.1573.3.1.7.2.2.1.9 |
swIpRouteAgeThe number of seconds since this route was last
updated or otherwise determined to be correct.
Note that no semantics of `too old' can be implied
except through knowledge of the routing protocol
by which the route was learned.rw INTEGER .1.3.6.1.4.1.1573.3.1.7.2.2.1.10 |
swIpRouteMaskIndicate the mask to be logical-ANDed with the
destination address before being compared to the
value in the ipRouteDest field. For those systems
that do not support arbitrary subnet masks, an
agent constructs the value of the ipRouteMask by
determining whether the value of the correspondent
ipRouteDest field belong to a class-A, B, or C
network, and then using one of:
mask network
255.0.0.0 class-A
255.255.0.0 class-B
255.255.255.0 class-C
If the value of the ipRouteDest is 0.0.0.0 (a
default route), then the mask value is also
0.0.0.0. It should be noted that all IP routing
subsystems implicitly use this mechanism.rw IpAddress .1.3.6.1.4.1.1573.3.1.7.2.2.1.11 |
swIpRouteMetric5An alternate routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
ipRouteProto value. If this metric is not used,
its value should be set to -1.rw INTEGER .1.3.6.1.4.1.1573.3.1.7.2.2.1.12 |
swIpRouteInfoA reference to MIB definitions specific to the
particular routing protocol which is responsible
for this route, as determined by the value
specified in the route's ipRouteProto value. If
this information is not present, its value should
be set to the OBJECT IDENTIFIER { 0 0 }, which is
a syntatically valid object identifier, and any
conformant implementation of ASN.1 and BER must be
able to generate and recognize this value.ro OBJECT IDENTIFIER .1.3.6.1.4.1.1573.3.1.7.2.2.1.13 |
swIpRouteBurbIndexA unique value of the Sidewinder suburb index.ro INTEGER -- .1.3.6.1.4.1.1573.3.1.7.2.2.1.14 |
swTcp OBJECT IDENTIFIER .1.3.6.1.4.1.1573.3.1.7.3 |
swTcpConnTableA table containing TCP connection-specific
information. SEQUENCE OF SwTcpConnEntry .1.3.6.1.4.1.1573.3.1.7.3.1 |
swTcpConnEntryInformation about a particular current TCP
connection. An object of this type is transient,
in that it ceases to exist when (or soon after)
the connection makes the transition to the CLOSED
state. SwTcpConnEntry .1.3.6.1.4.1.1573.3.1.7.3.1.1 |
swTcpConnStateThe state of this TCP connection.
The only value which may be set by a management
station is deleteTCB(12). Accordingly, it is
appropriate for an agent to return a `badValue'
response if a management station attempts to set
this object to any other value.
If a management station sets this object to the
value deleteTCB(12), then this has the effect of
deleting the TCB (as defined in RFC 793) of the
corresponding connection on the managed node,
resulting in immediate termination of the
connection.
As an implementation-specific option, a RST
segment may be sent from the managed node to the
other TCP endpoint (note however that RST segments
are not sent reliably).rw Enumeration .1.3.6.1.4.1.1573.3.1.7.3.1.1.1 |
swTcpConnLocalAddressThe local IP address for this TCP connection. In
the case of a connection in the listen state which
is willing to accept connections for any IP
interface associated with the node, the value
0.0.0.0 is used.ro IpAddress .1.3.6.1.4.1.1573.3.1.7.3.1.1.2 |
swTcpConnLocalPortThe local port number for this TCP connection.ro INTEGER .1.3.6.1.4.1.1573.3.1.7.3.1.1.3 |
swTcpConnRemAddressThe remote IP address for this TCP connection.ro IpAddress .1.3.6.1.4.1.1573.3.1.7.3.1.1.4 |
swTcpConnRemPortThe remote port number for this TCP connection.ro INTEGER .1.3.6.1.4.1.1573.3.1.7.3.1.1.5 |
swTcpConnBurbIndexA unique value of the Sidewinder suburb index.ro INTEGER -- .1.3.6.1.4.1.1573.3.1.7.3.1.1.6 |
swUdp OBJECT IDENTIFIER .1.3.6.1.4.1.1573.3.1.7.4 |
swUdpTableA table containing UDP listener information. SEQUENCE OF SwUdpEntry .1.3.6.1.4.1.1573.3.1.7.4.1 |
swUdpEntryInformation about a particular current UDP
listener. SwUdpEntry .1.3.6.1.4.1.1573.3.1.7.4.1.1 |
swUdpLocalAddressThe local IP address for this UDP listener. In
the case of a UDP listener which is willing to
accept datagrams for any IP interface associated
with the node, the value 0.0.0.0 is used.ro IpAddress .1.3.6.1.4.1.1573.3.1.7.4.1.1.1 |
swUdpLocalPortThe local port number for this UDP listener.ro INTEGER .1.3.6.1.4.1.1573.3.1.7.4.1.1.2 |
swUdpBurbIndexA unique value of the Sidewinder suburb index.ro INTEGER -- .1.3.6.1.4.1.1573.3.1.7.4.1.1.3 |
swTrap OBJECT IDENTIFIER .1.3.6.1.4.1.1573.3.1.10 |
sccAuthenFailSrcIpThe IP address of the host which issued an
unauthenticated get or set commandro IpAddress -- .1.3.6.1.4.1.1573.3.1.10.1 |
sccAuthenFailSrcCommNameThe community name that comes with the
unauthenticated get or set commandro OCTET STRING -- .1.3.6.1.4.1.1573.3.1.10.2 |
swUserro DisplayString .1.3.6.1.4.1.1573.3.1.10.3 |
swSRoleUserro DisplayString .1.3.6.1.4.1.1573.3.1.10.4 |
swSRoleNamero DisplayString .1.3.6.1.4.1.1573.3.1.10.5 |