SAMSUNG-PRINTER-EXT-MIB
Version: 1.00
Samsung SCMI Extension to IETF Printer MIB Module. This Module provides extension to the IETF Printer MIB.
Copyright (C) 2003-2004 Samsung Corporation. All Rights Reserved.
Main OID:
scmPrintMIB.1.3.6.1.4.1.236.11.5.11.55
251
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
251 total| Object Name |
|---|
scmPrintMIBVersion: 1.00
Samsung SCMI Extension to IETF Printer MIB Module.
This Module provides extension to the IETF Printer MIB.
Copyright (C) 2003-2004 Samsung Corporation. All Rights Reserved. MODULE-IDENTITY .1.3.6.1.4.1.236.11.5.11.55 |
scmPrtBase OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.1 |
scmPrtBaseTableA table of general counters and information for ease of use of
the SCMI Extension to IETF Printer MIB Module and the
IETF Printer MIB on this host system.
Usage: The ONLY valid row in the 'scmPrtBaseTable'
shall ALWAYS have an 'scmPrtBaseIndex' of one ('1'). SEQUENCE OF ScmPrtBaseEntry .1.3.6.1.4.1.236.11.5.11.55.1.2 |
scmPrtBaseEntryAn entry of general counters and information for ease of use of
the SCMI Extension to IETF Printer MIB Module and the
IETF Printer MIB on this host system.
Usage: The ONLY valid row in the 'scmPrtBaseTable'
shall ALWAYS have an 'scmPrtBaseIndex' of one ('1'). ScmPrtBaseEntry .1.3.6.1.4.1.236.11.5.11.55.1.2.1 |
scmPrtBaseIndexA unique value used by this host system to identify this
conceptual row in the 'scmPrtBaseTable'.
Usage: The ONLY valid row in the 'scmPrtBaseTable'
shall ALWAYS have an 'scmPrtBaseIndex' of one ('1'). Ordinal32 (SAMSUNG-GENERAL-TC) .1.3.6.1.4.1.236.11.5.11.55.1.2.1.1 |
scmPrtBaseRowStatusThis object is used to display status of the ONLY valid
conceptual row in the 'scmPrtBaseTable'.
Usage: 'scmPrtBaseRowStatus' is 'read-only' because
the ONLY valid conceptual row shall NOT be deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.236.11.5.11.55.1.2.1.2 |
scmPrtMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.2 |
scmPrtMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.2.3 |
scmPrtGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.5 |
scmPrtGeneralSimple OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.5.1 |
scmPrtGeneralPrnModelNameRepresent the printer model name currently being
connected with NPC.ro DisplayString .1.3.6.1.4.1.236.11.5.11.55.5.1.1 |
scmPrtGeneralPrnOSFWVerPrinter Software version number.ro DisplayString .1.3.6.1.4.1.236.11.5.11.55.5.1.2 |
scmPrtGeneralPrnModelVerModel version number.ro OCTET STRING .1.3.6.1.4.1.236.11.5.11.55.5.1.3 |
scmPrtGeneralPrnSerialNoPrinter Serial number.ro DisplayString .1.3.6.1.4.1.236.11.5.11.55.5.1.4 |
scmPrtGeneralPrnModelDescrPrinter HDD Size.ro OCTET STRING .1.3.6.1.4.1.236.11.5.11.55.5.1.5 |
scmPrtGeneralPrnManufacturePrinter DRAM Size.ro OCTET STRING .1.3.6.1.4.1.236.11.5.11.55.5.1.6 |
scmPrtGeneralPrnVendorPrint Per Minutero OCTET STRING .1.3.6.1.4.1.236.11.5.11.55.5.1.7 |
scmPrtGeneralPrnPCLFWVerPCL Version information of printerro DisplayString .1.3.6.1.4.1.236.11.5.11.55.5.1.11 |
scmPrtGeneralPrnEngFWVerPrint Engine FW Versionro DisplayString .1.3.6.1.4.1.236.11.5.11.55.5.1.12 |
scmPrtGeneralPrnSCFFWVerPrint SCF FW Versionro DisplayString .1.3.6.1.4.1.236.11.5.11.55.5.1.13 |
scmPrtGeneralPrnEpsonVerPrint Epson Versionro DisplayString .1.3.6.1.4.1.236.11.5.11.55.5.1.14 |
scmPrtGeneralPrnPCL5eVerPrint PCL5e Versionro DisplayString .1.3.6.1.4.1.236.11.5.11.55.5.1.15 |
scmPrtGeneralPrnPSFWVerPS Version information of printerro DisplayString .1.3.6.1.4.1.236.11.5.11.55.5.1.16 |
scmPrtGeneralPrnScanFWVerScanner FW Versionro DisplayString .1.3.6.1.4.1.236.11.5.11.55.5.1.17 |
scmPrtGeneralPrnKS5843VerPrinter KS5843 Version.ro DisplayString .1.3.6.1.4.1.236.11.5.11.55.5.1.18 |
scmPrtGeneralPrnKSSMVerPrinter KSSM Version.ro DisplayString .1.3.6.1.4.1.236.11.5.11.55.5.1.19 |
scmPrtGeneralPrnKS5895VerPrinter KS5895 Version.ro DisplayString .1.3.6.1.4.1.236.11.5.11.55.5.1.20 |
scmPrtGeneralPrnMainSystemVerPrinter Main System Versio.ro DisplayString .1.3.6.1.4.1.236.11.5.11.55.5.1.21 |
scmPrtGeneralPrnSPLVerPrint SPL Versionro DisplayString .1.3.6.1.4.1.236.11.5.11.55.5.1.22 |
scmPrtGeneralPrncolorPPMColor Printing PPMro INTEGER .1.3.6.1.4.1.236.11.5.11.55.5.1.23 |
scmPrtGeneralPrnPCL5CeVerPrint PCL5Ce Versionro DisplayString .1.3.6.1.4.1.236.11.5.11.55.5.1.24 |
scmPrtGeneralTableA table of general information per printer.
This table augments the prtGeneralTable. SEQUENCE OF ScmPrtGeneralEntry .1.3.6.1.4.1.236.11.5.11.55.5.2 |
scmPrtGeneralEntryAn entry exists in this table for each device entry in the
hostmib device table whose type is printer. ScmPrtGeneralEntry .1.3.6.1.4.1.236.11.5.11.55.5.2.1 |
scmPrtGeneralRowStatusManages the status of this conceptual row in the
scmPrtGeneralTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.236.11.5.11.55.5.2.1.1 |
scmPrtInput OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.8 |
scmPrtInputSimple OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.8.1 |
scmPrtInputTraySwitchif language is set to AUTO, this options can
the printer anlyzes the stream of data being
sent to determine which language is being used
by the printer job, and the printer's emulation
language automatically be switched if this options
is set.rw Integer32 .1.3.6.1.4.1.236.11.5.11.55.8.1.1 |
scmPrtInputTraySwitchOptionsavailable options of the modelrw Enumeration .1.3.6.1.4.1.236.11.5.11.55.8.1.2 |
scmPrtInputLockTrayTrays and combination trays can be locked out of
the paper selection process. The available options
depend on the configuration of MP tray.rw Integer32 .1.3.6.1.4.1.236.11.5.11.55.8.1.3 |
scmPrtInputLockTrayOptionsavailable options of the modelrw Integer32 .1.3.6.1.4.1.236.11.5.11.55.8.1.4 |
scmPrtInputPaperTypeIt determines paper thickness.rw Integer32 .1.3.6.1.4.1.236.11.5.11.55.8.1.5 |
scmPrtInputPaperTypeOptionsavailable options of current modelrw Enumeration .1.3.6.1.4.1.236.11.5.11.55.8.1.6 |
scmPrtInputTableThis table logically augments the Printer MIB's prtInputTable. SEQUENCE OF ScmPrtInputEntry .1.3.6.1.4.1.236.11.5.11.55.8.2 |
scmPrtInputEntryEntries may exist for each entry in the prtInputTable. ScmPrtInputEntry .1.3.6.1.4.1.236.11.5.11.55.8.2.1 |
scmPrtInputRowStatusManages the status of this conceptual row
in the scmPrtInputTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.236.11.5.11.55.8.2.1.1 |
scmPrtInputNextPrtInputIndexThe value of prtInputIndex corresponding to the input subunit
which will be used when this input subunit is emptied.
The value of zero indicates that auto input switching will not
occur when this input subunit is emptied.
Two different mechanisms for input tray switching,
scmPrtNextPrtInputIndex and scmPrtInputAliasGroup, are provided.
A device agent may make use of one or the other, none, or both.
Use the model that fits best for the given application.
Usage: Conforming management agents, which ALSO implement the
the Printer MIB v2, SHALL set 'scmPrtInputNextPrtInputIndex'
to the SAME value as 'prtInputNextIndex' (i.e., the values of
these two objects SHALL be interlocked).rw Integer32 .1.3.6.1.4.1.236.11.5.11.55.8.2.1.2 |
scmPrtInputUseCustomSizeSpecifies how this input subunit determines the paper size to
use.
If the value is 'Off' this input subunit uses the paper size
automatically sensed by the subunit.
If the value is 'On' this input subunit uses the custom
dimensions provided by scmPrtInputCustDimFeedDirDecl and
scmPrtInputCustDimXFeedDirDecl.rw PresentOnOff (Printer-MIB) .1.3.6.1.4.1.236.11.5.11.55.8.2.1.3 |
scmPrtInputCustDimFeedDirDeclProvides the dimension, in the feed direction, of the media in
this input subunit, when the value of scmPrtInputUseCustomSize
is set to 'On'.
When scmPrtInputUseCustomSize is set to On, this value is copied
to prtInputMediaDimFeedDirDeclared and
prtInputMediaDimFeedDirChosen.rw Integer32 .1.3.6.1.4.1.236.11.5.11.55.8.2.1.4 |
scmPrtInputCustDimXFeedDirDeclProvides the dimension, in the feed direction, of the media in
this input subunit, when the value of scmPrtInputUseCustomSize
is set to 'On'.
When scmPrtInputUseCustomSize is set to 'On', this value is
copied to prtInputMediaDimFeedDirDeclared and
prtInputMediaDimFeedDirChosen.rw Integer32 .1.3.6.1.4.1.236.11.5.11.55.8.2.1.5 |
scmPrtInputTrayPriorityThe current priority of this tray. This value/mechanism
is independent of scmPrtNextPrtInputIndex and
scmPrtInputAliasGroup.
Usage: The priority of this device, where '0' is
unspecified (default), '1' is lowest, and '100' is highest.rw Integer32 .1.3.6.1.4.1.236.11.5.11.55.8.2.1.6 |
scmPrtInputPaperSizeValue of Paper size for printing.
Some printer such like ML6060 or Modena have a 4 bytes data length.
So, to distinguish these models we have to check model id or version.rw Integer32 .1.3.6.1.4.1.236.11.5.11.55.8.2.1.7 |
scmPrtInputPaperSizeOptionsPaper size options that are available in this model.
Some printer such like ML6060 or Modena have a 4 bytes data length.
So, to distinguish these models we have to check model id or version.ro Enumeration .1.3.6.1.4.1.236.11.5.11.55.8.2.1.8 |
scmPrtInputTrayNumIt can select the type of paper tray. The types of
tray can be varied according to the printer modelrw Integer32 .1.3.6.1.4.1.236.11.5.11.55.8.2.1.9 |
scmPrtInputTrayNumOptionsavailable options of tray typesrw Integer32 .1.3.6.1.4.1.236.11.5.11.55.8.2.1.10 |
scmPrtOutput OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.9 |
scmPrtOutputTableThis table logically augments the prtOutputTable in the
Printer MIB. SEQUENCE OF ScmPrtOutputEntry .1.3.6.1.4.1.236.11.5.11.55.9.1 |
scmPrtOutputEntryEntries may exist for each entry in the prtOutputTable. ScmPrtOutputEntry .1.3.6.1.4.1.236.11.5.11.55.9.1.1 |
scmPrtOutputRowStatusManages the status of this conceptual row in the
scmPrtOutputTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.236.11.5.11.55.9.1.1.1 |
scmPrtOutputNextIndexThe value of prtOutputIndex corresponding to the output subunit
which will be used when this output subunit is filled.
A value of zero(0) indicates that auto output switching will not
occur when this output subunit is filled.rw Integer32 .1.3.6.1.4.1.236.11.5.11.55.9.1.1.2 |
scmPrtOutputPasswordThis object is used as the password for an Output Tray, e.g. an
output mailbox. It is the value that must be entered to open
the output tray.rw OCTET STRING .1.3.6.1.4.1.236.11.5.11.55.9.1.1.3 |
scmPrtOutputOffsetStackingTypeThis object further refines the type of offset stacking from
that specified by the object prtOutputOffsetStacking in the
Printer MIB.rw ScmPrtOutputOffsetStackingType (SAMSUNG-PRINTER-EXT-TC) .1.3.6.1.4.1.236.11.5.11.55.9.1.1.4 |
scmPrtOutputTrayTimeoutSupportDetermines whether the printer should wait before sending
the printed output to another output destination when the
selected or default destination is full.
'On' indicates that would should wait as specified by
scmPrtOutputTrayTimeout.
'Off' indicates this feature is off and should immediately
seek to send the printed output to another destination.
The value 'other' shall mean not specified.rw PresentOnOff (Printer-MIB) .1.3.6.1.4.1.236.11.5.11.55.9.1.1.5 |
scmPrtOutputTrayTimeoutDetermines how long the printer should wait before sending
the printed output to another output destination when the
selected or default destination is full.
A value of (0) implies 'other' or 'infinite' which translates
to this input subunit does not support this feature.rw Cardinal32 UNITS "Seconds" .1.3.6.1.4.1.236.11.5.11.55.9.1.1.6 |
scmPrtOutputFinishierThis object declares the printer output finishier.rw Integer32 .1.3.6.1.4.1.236.11.5.11.55.9.1.1.51 |
scmPrtOutputFinishierOptionsThis object declares the printer output finishier option.
options 1. staple
2. punchrw Integer32 .1.3.6.1.4.1.236.11.5.11.55.9.1.1.52 |
scmPrtChannel OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.14 |
scmPrtChannelSimple OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.14.1 |
scmPrtChannelTableThis table logically augments Printer MIB's prtChannelTable. SEQUENCE OF ScmPrtChannelEntry .1.3.6.1.4.1.236.11.5.11.55.14.2 |
scmPrtChannelEntryAn entry exists corresponding to each entry in the
prtChannelTable. ScmPrtChannelEntry .1.3.6.1.4.1.236.11.5.11.55.14.2.1 |
scmPrtChannelRowStatusManages the status of this conceptual row in the
scmPrtChannelTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.236.11.5.11.55.14.2.1.1 |
scmPrtChannelEOJTimeoutDefines the number of seconds that the channel waits before
timing out. For example, this may be used for the parallel
channel.
The value zero means infinite or no timeout on the channel.rw Cardinal32 UNITS "Seconds" .1.3.6.1.4.1.236.11.5.11.55.14.2.1.2 |
scmPrtInterpreter OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.15 |
scmPrtInterpreterSimple OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.15.1 |
scmPrtInterpreterCopyNumIt can select how many papers are printed
Normally it can be selected 1- 999.rw INTEGER .1.3.6.1.4.1.236.11.5.11.55.15.1.1 |
scmPrtInterpreterEmulationEmulation optionrw Integer32 .1.3.6.1.4.1.236.11.5.11.55.15.1.2 |
scmPrtInterpreterEmulationOptionsavailable options of the modelrw Enumeration .1.3.6.1.4.1.236.11.5.11.55.15.1.3 |
scmPrtInterpreterTableThis table logically augments the Printer MIB's
prtInterpreterTable. SEQUENCE OF ScmPrtInterpreterEntry .1.3.6.1.4.1.236.11.5.11.55.15.2 |
scmPrtInterpreterEntryAn entry exists corresponding to each entry in the
prtInterpreterTable. ScmPrtInterpreterEntry .1.3.6.1.4.1.236.11.5.11.55.15.2.1 |
scmPrtInterpRowStatusManages the status of this conceptual row in the
scmPrtInterpreterTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.236.11.5.11.55.15.2.1.1 |
scmPrtInterpJobCopiesDefaultThis defines the default number of job copies to be printed
by this interpreter.
If set incorrectly, this object may cause difficulties at
customer sites. Agent developers should consider making this
object read-only, permanently set to one copy.rw Ordinal32 (SAMSUNG-GENERAL-TC) .1.3.6.1.4.1.236.11.5.11.55.15.2.1.9 |
scmPrtInterpLineTermEnables adding a Carriage Return after every Line Feed.
The value 'On' indicates that a Carriage Return will be
added after every Line Feed.
Usage example: This is a useful feature when printing text
jobs via PCL through a standard queue in UNIX.
The value 'other' shall mean not specified.rw PresentOnOff (Printer-MIB) .1.3.6.1.4.1.236.11.5.11.55.15.2.1.33 |
scmPrtInterpProcessBarcodesSpecifies whether the 'extra' barcode processing within
the interpreter should be used.rw PresentOnOff (Printer-MIB) .1.3.6.1.4.1.236.11.5.11.55.15.2.1.54 |
scmPrtInterpOrientationIt determines the direction of the print image on the
page. The first two kinds of options are portrait(tall)
and landscape(wide). reversePortrait is 180 degrees
rotation of portrait. reverseLandscape is 180 degrees
rotation of landscape.rw Integer32 .1.3.6.1.4.1.236.11.5.11.55.15.2.1.60 |
scmPrtInterpOrientationOptionsavailable options in orientationro Enumeration .1.3.6.1.4.1.236.11.5.11.55.15.2.1.61 |
scmPrtMediaPath OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.16 |
scmPrtMarker OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.17 |
scmPrtMarkerSimple OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.17.1 |
scmPrtMarkerMarginUnitro Enumeration .1.3.6.1.4.1.236.11.5.11.55.17.1.1 |
scmPrtMarkerSrtIt determin Samsung Resolution Technology option
when it is ON.rw Integer32 .1.3.6.1.4.1.236.11.5.11.55.17.1.2 |
scmPrtMarkerSrtOptionsavailable options of current modelro Enumeration .1.3.6.1.4.1.236.11.5.11.55.17.1.3 |
scmPrtMarkerDensityIt determines the overall density of pagero Integer32 .1.3.6.1.4.1.236.11.5.11.55.17.1.4 |
scmPrtMarkerDensityOptionsavailable options of current modelro Enumeration .1.3.6.1.4.1.236.11.5.11.55.17.1.5 |
scmPrtMarkerSmetModeThe value of this object indicates whether the SMET mode is
currently enabled.ro Integer32 .1.3.6.1.4.1.236.11.5.11.55.17.1.6 |
scmPrtMarkerSmetModeOptionsThe value of this object will be the bitwise OR of the supported
values for smetMode in this printer.ro Enumeration .1.3.6.1.4.1.236.11.5.11.55.17.1.7 |
scmPrtMarkerduplexTopMarginThe value of this object gives the top margin on the backside of
a page when printing in duplex mode. The actual value used in the
printer is the value of this object divided by 10. The unit is inch.ro INTEGER .1.3.6.1.4.1.236.11.5.11.55.17.1.8 |
scmPrtMarkerduplexLeftMarginThe value of this object gives the left margin on the backside of
a page when printing in duplex mode. The actual value used in the
printer is the value of this object divided by 10. The unit is inch.ro INTEGER .1.3.6.1.4.1.236.11.5.11.55.17.1.9 |
scmPrtMarkerShortEdgeBindingMarginThe value of this object gives the margin left for binding on the
short edge of the paper when printing is done in short edge duplex
mode. The actual value used in the printer is the value of this
object divided by 10. The unit is inch.ro INTEGER .1.3.6.1.4.1.236.11.5.11.55.17.1.10 |
scmPrtMarkerLongEdgeBindingMarginThe value of this object gives the margin left for binding on the
long edge of the paper when printing is done in long edge duplex
mode. The actual value used in the printer is the value of this
object divided by 10. The unit is inch.ro INTEGER .1.3.6.1.4.1.236.11.5.11.55.17.1.11 |
scmPrtMarkerTonerSaveEcho mode option.
Echo mode Off
Echo mode Onro Integer32 .1.3.6.1.4.1.236.11.5.11.55.17.1.12 |
scmPrtMarkerTonerSaveOptionsavailable options of the modelro Integer32 .1.3.6.1.4.1.236.11.5.11.55.17.1.13 |
scmPrtMarkerTonerOutActionThe value of this object gives the action taken by the printer
when the tonerLow condition occurs. If the value is continue(1),
the printer continues to print in spite of the toner being low.
If the value is stop(2), the printer stops printing when the toner
is low.ro Integer32 .1.3.6.1.4.1.236.11.5.11.55.17.1.14 |
scmPrtMarkerTonerOutActionOptionsThe value of this object will be the bitwise OR of the supported
values for tonerLowAction in this printer.ro Enumeration .1.3.6.1.4.1.236.11.5.11.55.17.1.15 |
scmPrtMarkerTable SEQUENCE OF ScmPrtMarkerEntry .1.3.6.1.4.1.236.11.5.11.55.17.2 |
scmPrtMarkerEntryEntries may exist in the table for each device
index who's device type is printer ScmPrtMarkerEntry .1.3.6.1.4.1.236.11.5.11.55.17.2.1 |
scmPrtMarkerTonerIndexIndex of the Toner numberro Ordinal32 (SAMSUNG-GENERAL-TC) .1.3.6.1.4.1.236.11.5.11.55.17.2.1.1 |
scmPrtMarkerResolutionThe value of this object gives the current resolution used while
printing. The value res300(1) means 300X300 dpi resolution. The
value res600(2) means 600X600 dpi resolution. The value res1200(4)
means 1200X1200 dpi resolution.rw Integer32 .1.3.6.1.4.1.236.11.5.11.55.17.2.1.2 |
scmPrtMarkerResolutionOptionsThe value of this object will be the bitwise OR of all the supported
values for resolution in this printer.ro Enumeration .1.3.6.1.4.1.236.11.5.11.55.17.2.1.3 |
scmPrtMarkerTonerColorcolor of Tonerro Integer32 .1.3.6.1.4.1.236.11.5.11.55.17.2.1.4 |
scmPrtMarkerTonerColorDescriptionDescription of Tonerro OCTET STRING .1.3.6.1.4.1.236.11.5.11.55.17.2.1.5 |
scmPrtMarkerTonerLevelIndication of Toner remainderro Integer32 .1.3.6.1.4.1.236.11.5.11.55.17.2.1.6 |
scmPrtOperation OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.18 |
scmPrtOperationSimple OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.18.1 |
scmPrtOperationJobCancelPrinter Operation Job Cancel Requestrw Enumeration .1.3.6.1.4.1.236.11.5.11.55.18.1.1 |
scmPrtOperarionMenuClearWhen the value of this object is set to clearMenus(1), the values of
all the printer properties in all the menus will be set to default
values.rw Enumeration .1.3.6.1.4.1.236.11.5.11.55.18.1.2 |
scmPrtOperationMenuClearOptionsThe value of this object will be the bitwise OR of the supported
values for menuClear in this printer.ro Enumeration .1.3.6.1.4.1.236.11.5.11.55.18.1.3 |
scmPrtOperationFuserCleanWhen the value of this object is set to fuserClean(2),the printer fuser will be clearrw Enumeration .1.3.6.1.4.1.236.11.5.11.55.18.1.4 |
scmPrtOperationFuserCleanOptionsThe value of this object will be the bitwise OR of the supported
values for nfuserClean in this printer.ro Enumeration .1.3.6.1.4.1.236.11.5.11.55.18.1.5 |
scmPrtOperationOpcCleanWhen the value of this object is set to opcClean(2),the printer OPC will be clearrw Enumeration .1.3.6.1.4.1.236.11.5.11.55.18.1.6 |
scmPrtOperationOpcCleanOptionsThe value of this object will be the bitwise OR of the supported
values for nopcClean in this printer.ro Enumeration .1.3.6.1.4.1.236.11.5.11.55.18.1.7 |
scmPrtOperationTestPrtRequestrequest test printing
1: requestrw Integer32 .1.3.6.1.4.1.236.11.5.11.55.18.1.8 |
scmPrtOperationPrintFontRequestrequest test printing
1: pcl request
2: ps request
3: ks5843 request
4: kssm request
5: ks5895 request
6: epson requese,
7: opcClean request,
8: fuserClean request,
9: configpage request,
10: kssm request,
11: menuMap request,
12: psFlashDirectory requese,rw Enumeration .1.3.6.1.4.1.236.11.5.11.55.18.1.9 |
scmPrtOperationPrintBlackOnlyDescription.rw Enumeration .1.3.6.1.4.1.236.11.5.11.55.18.1.10 |
scmPrtOperationTable SEQUENCE OF ScmPrtOperationEntry .1.3.6.1.4.1.236.11.5.11.55.18.2 |
scmPrtOperationEntry ScmPrtOperationEntry .1.3.6.1.4.1.236.11.5.11.55.18.2.1 |
scmPrtOperationIndexro Ordinal32 (SAMSUNG-GENERAL-TC) .1.3.6.1.4.1.236.11.5.11.55.18.2.1.1 |
scmPrtConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.19 |
scmPrtConfigurationSimple OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.19.1 |
scmPrtConfigurationPowerSaveset power save mode 1: power save moderw Integer32 .1.3.6.1.4.1.236.11.5.11.55.19.1.1 |
scmPrtConfigurationPowerSaveOptionsavailable options of the modelro Enumeration .1.3.6.1.4.1.236.11.5.11.55.19.1.2 |
scmPrtConfigurationAutocontIt determines the printer action when the user
prints a page without paper in the manual feed
slot but the paper source is set to manual feed.
If Auto Continue is ON the printer pick up the
paper from the tray after few second. If it is
OFF the printer wait forever until user insert
paper into a manual feed slot.rw Integer32 .1.3.6.1.4.1.236.11.5.11.55.19.1.3 |
scmPrtConfigurationAutoCountOptionsavailable options of the modelro Enumeration .1.3.6.1.4.1.236.11.5.11.55.19.1.4 |
scmPrtConfigurationJam2Recoverif it is on and occur JAM at Jam2 point
printer will print this page again.rw Integer32 .1.3.6.1.4.1.236.11.5.11.55.19.1.5 |
scmPrtConfigurationJam2RecOptionsavailable options of the modelro Enumeration .1.3.6.1.4.1.236.11.5.11.55.19.1.6 |
scmPrtConfigurationAltitudeActionThe value 'low(1)' will be used when the printer is in the low altitude
location. The value 'high(2)' will be used when the printer is in
the high altitude location.rw Integer32 .1.3.6.1.4.1.236.11.5.11.55.19.1.7 |
scmPrtConfigurationAltitudeActionOptionsThe value of this object will be the bitwise OR of the supported
values for altitudeAction in this printer.ro Enumeration .1.3.6.1.4.1.236.11.5.11.55.19.1.8 |
scmPrtConfigurationTable SEQUENCE OF ScmPrtConfigurationEntry .1.3.6.1.4.1.236.11.5.11.55.19.2 |
scmPrtConfigurationEntry ScmPrtConfigurationEntry .1.3.6.1.4.1.236.11.5.11.55.19.2.1 |
scmPrtConfigurationIndexro Ordinal32 (SAMSUNG-GENERAL-TC) .1.3.6.1.4.1.236.11.5.11.55.19.2.1.1 |
scmPrtCount OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.20 |
scmPrtCountSimple OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.20.1 |
scmPrtCountDrumImageCountro Integer32 .1.3.6.1.4.1.236.11.5.11.55.20.1.1 |
scmPrtCountDrumImageCountResetrw Enumeration .1.3.6.1.4.1.236.11.5.11.55.20.1.2 |
scmPrtCountTransferImageCountro Integer32 .1.3.6.1.4.1.236.11.5.11.55.20.1.3 |
scmPrtCountTransferImageCountResetrw Enumeration .1.3.6.1.4.1.236.11.5.11.55.20.1.4 |
scmPrtCountFuserImageCountro Integer32 .1.3.6.1.4.1.236.11.5.11.55.20.1.5 |
scmPrtCountFuserImageCountResetrw Enumeration .1.3.6.1.4.1.236.11.5.11.55.20.1.6 |
scmPrtCountTwoRollerCountro Integer32 .1.3.6.1.4.1.236.11.5.11.55.20.1.7 |
scmPrtCountTwoRollerResetrw Enumeration .1.3.6.1.4.1.236.11.5.11.55.20.1.8 |
scmPrtCountPickupMPCountro Integer32 .1.3.6.1.4.1.236.11.5.11.55.20.1.9 |
scmPrtCountPickupMPResetrw Enumeration .1.3.6.1.4.1.236.11.5.11.55.20.1.10 |
scmPrtCountPickupTray1Countro Integer32 .1.3.6.1.4.1.236.11.5.11.55.20.1.11 |
scmPrtCountPickupTray1Resetrw Enumeration .1.3.6.1.4.1.236.11.5.11.55.20.1.12 |
scmPrtCountPickupTray2Countro Integer32 .1.3.6.1.4.1.236.11.5.11.55.20.1.13 |
scmPrtCountPickupTray2Resetrw Enumeration .1.3.6.1.4.1.236.11.5.11.55.20.1.14 |
scmPrtCountTable SEQUENCE OF ScmPrtCountEntry .1.3.6.1.4.1.236.11.5.11.55.20.2 |
scmPrtCountEntry ScmPrtCountEntry .1.3.6.1.4.1.236.11.5.11.55.20.2.1 |
scmPrtCountIndexro Integer32 .1.3.6.1.4.1.236.11.5.11.55.20.2.1.1 |
scmPrtCountDeviceTypeDescription.ro Enumeration .1.3.6.1.4.1.236.11.5.11.55.20.2.1.2 |
scmPrtCountTypeDescription.ro Enumeration .1.3.6.1.4.1.236.11.5.11.55.20.2.1.3 |
scmPrtCountMediaSizePaper size options that are available in this model.
Some printer such like ML6060 or Modena have a 4 bytes data length.
So, to distinguish these models we have to check model id or version.ro Enumeration .1.3.6.1.4.1.236.11.5.11.55.20.2.1.4 |
scmPrtCountColorantDescription.ro Enumeration .1.3.6.1.4.1.236.11.5.11.55.20.2.1.5 |
scmPrtCountDuplexDescription.ro Enumeration .1.3.6.1.4.1.236.11.5.11.55.20.2.1.6 |
scmPrtCountResolutionDescription.rw Enumeration .1.3.6.1.4.1.236.11.5.11.55.20.2.1.7 |
scmPrtCountUnitDescription.ro Enumeration .1.3.6.1.4.1.236.11.5.11.55.20.2.1.8 |
scmPrtCountValueDescription.ro Integer32 .1.3.6.1.4.1.236.11.5.11.55.20.2.1.9 |
scmPrtSerial OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.21 |
scmPrtSerialSimple OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.21.1 |
scmPrtSerialTable SEQUENCE OF ScmPrtSerialEntry .1.3.6.1.4.1.236.11.5.11.55.21.2 |
scmPrtSerialEntry ScmPrtSerialEntry .1.3.6.1.4.1.236.11.5.11.55.21.2.1 |
scmPrtSerialIndex Ordinal32 (SAMSUNG-GENERAL-TC) .1.3.6.1.4.1.236.11.5.11.55.21.2.1.1 |
scmPrtSerialNbaudRatethe speed when user use a serial portrw Integer32 .1.3.6.1.4.1.236.11.5.11.55.21.2.1.2 |
scmPrtSerialBrOptionsavailable options of printerro Integer32 .1.3.6.1.4.1.236.11.5.11.55.21.2.1.3 |
scmPrtSerialBobuxonrw Enumeration .1.3.6.1.4.1.236.11.5.11.55.21.2.1.4 |
scmPrtSerialBobuxonOptionsThe value of this object will be the bitwise OR of the supported
values for robuxon in this printer.ro Integer32 .1.3.6.1.4.1.236.11.5.11.55.21.2.1.5 |
scmPrtPCL OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.22 |
scmPrtPCLSimple OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.22.1 |
scmPrtPCLFontrw INTEGER .1.3.6.1.4.1.236.11.5.11.55.22.1.1 |
scmPrtPCLSymbolSetrw INTEGER .1.3.6.1.4.1.236.11.5.11.55.22.1.2 |
scmPrtPCLFormLinerw INTEGER .1.3.6.1.4.1.236.11.5.11.55.22.1.3 |
scmPrtPCLPitchrw INTEGER .1.3.6.1.4.1.236.11.5.11.55.22.1.4 |
scmPrtPCLPointSizerw INTEGER .1.3.6.1.4.1.236.11.5.11.55.22.1.5 |
scmPrtPCLCourierrw Integer32 .1.3.6.1.4.1.236.11.5.11.55.22.1.6 |
scmPrtPCLCourierOptionsro Enumeration .1.3.6.1.4.1.236.11.5.11.55.22.1.7 |
scmPrtPCLAppendCRrw Integer32 .1.3.6.1.4.1.236.11.5.11.55.22.1.8 |
scmPrtPCLAppendCROptionsro Enumeration .1.3.6.1.4.1.236.11.5.11.55.22.1.9 |
scmPrtPCLWideA4rw Integer32 .1.3.6.1.4.1.236.11.5.11.55.22.1.10 |
scmPrtPCLWideA4Optionsro Enumeration .1.3.6.1.4.1.236.11.5.11.55.22.1.11 |
scmPrtPCLTopMarginMargine between top and first line of this page
,actuall value of printing is a value divided by 10.
basic unit is inch. If Orientation is portrait or reverse
portrait, then the range of topMargine is 0 to 99 and if
Orientation is landscape or reverse landscape, then range is 0 to 170rw INTEGER .1.3.6.1.4.1.236.11.5.11.55.22.1.12 |
scmPrtPCLLeftMarginLeft margine of printed page, actual value is
a value divided by 10. Basic unit is inch.
If Orentation is landscape or reverse landscape, the range is 0
to 99 and if the Orientation is portrait or reverse portrait,
the range is 0 to 170.rw INTEGER .1.3.6.1.4.1.236.11.5.11.55.22.1.13 |
scmPrtPCLTable SEQUENCE OF ScmPrtPCLEntry .1.3.6.1.4.1.236.11.5.11.55.22.2 |
scmPrtPCLEntry ScmPrtPCLEntry .1.3.6.1.4.1.236.11.5.11.55.22.2.1 |
scmPrtPCLIndexro Ordinal32 (SAMSUNG-GENERAL-TC) .1.3.6.1.4.1.236.11.5.11.55.22.2.1.1 |
scmPrtKS5843 OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.23 |
scmPrtKS5843Simple OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.23.1 |
scmPrtKS5843Fontrw Integer32 .1.3.6.1.4.1.236.11.5.11.55.23.1.1 |
scmPrtKS5843FontOptionsro Enumeration .1.3.6.1.4.1.236.11.5.11.55.23.1.2 |
scmPrtKS5843Coderw Integer32 .1.3.6.1.4.1.236.11.5.11.55.23.1.3 |
scmPrtKS5843CodeOptionsro Enumeration .1.3.6.1.4.1.236.11.5.11.55.23.1.4 |
scmPrtKS5843cpirw Integer32 .1.3.6.1.4.1.236.11.5.11.55.23.1.5 |
scmPrtKS5843cpiOptionsro Enumeration .1.3.6.1.4.1.236.11.5.11.55.23.1.6 |
scmPrtKS5843Linesrw INTEGER .1.3.6.1.4.1.236.11.5.11.55.23.1.7 |
scmPrtKS5843Zoomrw INTEGER .1.3.6.1.4.1.236.11.5.11.55.23.1.8 |
scmPrtKS5843AutoWraprw Integer32 .1.3.6.1.4.1.236.11.5.11.55.23.1.9 |
scmPrtKS5843AutoWrapOptionsro Enumeration .1.3.6.1.4.1.236.11.5.11.55.23.1.10 |
scmPrtKS5843Topmarginrw INTEGER .1.3.6.1.4.1.236.11.5.11.55.23.1.11 |
scmPrtKS5843SitemodeEach site special Mode except ksc5843 standardrw INTEGER .1.3.6.1.4.1.236.11.5.11.55.23.1.12 |
scmPrtKSSM OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.24 |
scmPrtKSSMSimple OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.24.1 |
scmPrtKSSMFontrw Integer32 .1.3.6.1.4.1.236.11.5.11.55.24.1.1 |
scmPrtKSSMFontOptionsro Enumeration .1.3.6.1.4.1.236.11.5.11.55.24.1.2 |
scmPrtKSSMCoderw Integer32 .1.3.6.1.4.1.236.11.5.11.55.24.1.3 |
scmPrtKSSMCodeOptionsro Enumeration .1.3.6.1.4.1.236.11.5.11.55.24.1.4 |
scmPrtKSSMCPIrw Integer32 .1.3.6.1.4.1.236.11.5.11.55.24.1.5 |
scmPrtKSSMCPIOptionsro Enumeration .1.3.6.1.4.1.236.11.5.11.55.24.1.6 |
scmPrtKSSMLinesrw INTEGER .1.3.6.1.4.1.236.11.5.11.55.24.1.7 |
scmPrtKSSMZoomrw INTEGER .1.3.6.1.4.1.236.11.5.11.55.24.1.8 |
scmPrtKSSMAutoWraprw Integer32 .1.3.6.1.4.1.236.11.5.11.55.24.1.9 |
scmPrtKSSMAutoWrapOptionsro Enumeration .1.3.6.1.4.1.236.11.5.11.55.24.1.10 |
scmPrtKSSMTopMarginrw INTEGER .1.3.6.1.4.1.236.11.5.11.55.24.1.11 |
scmPrtKSSMSiteModerw INTEGER .1.3.6.1.4.1.236.11.5.11.55.24.1.12 |
scmPrtIPP OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.25 |
scmPrtIPPSimple OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.25.1 |
scmPrtIPPColorSupportedThe value of this object indicates whether the printer supports
color printing.ro Enumeration .1.3.6.1.4.1.236.11.5.11.55.25.1.1 |
scmPrtIPPJobKOctetsSupportedLBoundThe value of this object gives the lower bound of the size in
units of 1024 octets for jobs accepted by the printer.ro Integer32 .1.3.6.1.4.1.236.11.5.11.55.25.1.2 |
scmPrtIPPJobKOctetsSupportedUBoundThe value of this object gives the upper bound of the size in
units of 1024 octets for jobs accepted by the printer.ro Integer32 .1.3.6.1.4.1.236.11.5.11.55.25.1.3 |
scmPrtIPPJobImpressionsSupportedLBoundThe value of this object gives the lower bound of the number of
print images for a job.ro Integer32 .1.3.6.1.4.1.236.11.5.11.55.25.1.4 |
scmPrtIPPJobImpressionsSupportedUBoundThe value of this object gives the upper bound of the number of
print images for a job.ro Integer32 .1.3.6.1.4.1.236.11.5.11.55.25.1.5 |
scmPrtIPPJobMediaSheetsSupportedLBoundThe value of this object gives the lower bound of the number of
pages printed for a job.ro Integer32 .1.3.6.1.4.1.236.11.5.11.55.25.1.6 |
scmPrtIPPJobMediaSheetsSupportedUBoundThe value of this object gives the upper bound of the number of
pages printed for a job.ro Integer32 .1.3.6.1.4.1.236.11.5.11.55.25.1.7 |
scmPrtIPPJobSheetsThe value of this object specifies the type of job start/end sheets
printed with every IPP job. If the value is standard(1), the
printer specific standard job start/end sheets will be printed for
each job.rw Enumeration .1.3.6.1.4.1.236.11.5.11.55.25.1.8 |
scmPrtIPPCollatedCopiesLBoundThe value of this object gives the lower bound of the number of
collated copies supported in this printer.ro Integer32 .1.3.6.1.4.1.236.11.5.11.55.25.1.9 |
scmPrtIPPCollatedCopiesUBoundThe value of this object gives the upper bound of the number of
collated copies supported in this printer.ro Integer32 .1.3.6.1.4.1.236.11.5.11.55.25.1.10 |
scmPrtIPPCollatedCopiesThe value of this object gives the number of collated copies
printed for the each job.rw Integer32 .1.3.6.1.4.1.236.11.5.11.55.25.1.11 |
scmPrtIPPFinishingsSupportedThe value of this object gives the type of finishings supported
in the printer. If bit 1 is set, stapling is supported. If bit 2
is set, punching is supported. If bit 3 is set, covering of printed
document is supported. If bit 4 is set, binding is supported. If
bit 0 is set, the option of no finishings is supported.ro Integer32 .1.3.6.1.4.1.236.11.5.11.55.25.1.12 |
scmPrtIPPFinishingsThe value of this object gives the set of finishings applied for
each job. If bit 0 is set, no finishings are applied. If bit 1
is set, stapling is done for each job. If bit 2 is set, punching
is done for each job. If bit 3 is set, the printed document will
be covered. If bit 4 is set, binding will be done for each job.rw Integer32 .1.3.6.1.4.1.236.11.5.11.55.25.1.13 |
scmPrtIPPPageRangesSupportedThe value of this object indicates whether printing only a range
of pages for IPP jobs is supported. If the value is on(1),
printing only specified page ranges of the given IPP job is
supported.rw Enumeration .1.3.6.1.4.1.236.11.5.11.55.25.1.14 |
scmPrtIPPNumberUpThe value of this object indicates the number of print images
imposed on one side of a page.rw Integer32 .1.3.6.1.4.1.236.11.5.11.55.25.1.15 |
scmPrtIPPNumberUpOptionsThe value of this object will be the bitwise OR of the supported
values for numberUp in this printer.ro Enumeration .1.3.6.1.4.1.236.11.5.11.55.25.1.16 |
scmPrtIPPPrintQualityThe value of this object indicates the print quality that the
printer uses for a print job. The value draft(1) means lowest
quality available on the printer. Tha value normal(2) means
normal or intermediate quality on the printer. The value high(4)
means highest quality available on the printer.rw Integer32 .1.3.6.1.4.1.236.11.5.11.55.25.1.17 |
scmPrtIPPPrintQualityOptionsThe value of this object will be the bitwise OR of the supported
values for printQuality in this printer.ro Enumeration .1.3.6.1.4.1.236.11.5.11.55.25.1.18 |
scmPrtIPPJobKOctetsProcessedThe value of this object gives the number of units of 1024 octets
printed for the current job.ro Integer32 .1.3.6.1.4.1.236.11.5.11.55.25.1.19 |
scmPrtIPPJobImpressionsCompletedThe value of this object gives the number of print images printed
for the current job.ro Integer32 .1.3.6.1.4.1.236.11.5.11.55.25.1.20 |
scmPrtIPPJobMediaSheetsCompletedThe value of this object gives the number of pages printed
for the current job.ro Integer32 .1.3.6.1.4.1.236.11.5.11.55.25.1.21 |
scmPrtAlert OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.26 |
scmPrtAlertSimple OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.26.1 |
scmPrtAlertAlarmShortagePrinter Alert Alarm Shortagerw Enumeration .1.3.6.1.4.1.236.11.5.11.55.26.1.1 |
scmPrtAlertAlarmShortageOptionsPrinter Alert Shortage Oprionsro Integer32 .1.3.6.1.4.1.236.11.5.11.55.26.1.2 |
scmPrtConsoleDisplayBuffer OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.27 |
scmPrtConsoleDisplayBufferSimple OBJECT IDENTIFIER .1.3.6.1.4.1.236.11.5.11.55.27.1 |
scmPrtConsoleDisplayBufferLcdLangTypePrinter Console (LCD) Display String Language Typerw Enumeration .1.3.6.1.4.1.236.11.5.11.55.27.1.1 |
scmPrtConsoleDisplayBufferLcdLangTypeOptionsPrinter Console (LCD) Display String Language Type Optionrw Integer32 .1.3.6.1.4.1.236.11.5.11.55.27.1.2 |