RUCKUS-ZD-AAA-MIB
AI MIB Summary
The RUCKUS-ZD-AAA-MIB enables SNMP-based configuration and monitoring of Authentication, Authorization, and Accounting (AAA) parameters on Ruckus ZoneDirector wireless controllers, specifically tracking local user accounts, RADIUS/TACACS+ server connectivity states, and authentication session statuses.
Ruckus ZD AAA Configuration mib
Main OID:
ruckusZDAAAMIB.1.3.6.1.4.1.25053.1.2.2.3
21
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
21 total| Object Name |
|---|
ruckusZDAAAMIBRuckus ZD AAA Configuration mib MODULE-IDENTITY .1.3.6.1.4.1.25053.1.2.2.3 |
ruckusZDAAAObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25053.1.2.2.3.1 |
ruckusZDAAAConfig OBJECT IDENTIFIER .1.3.6.1.4.1.25053.1.2.2.3.1.1 |
ruckusZDAAAConfigTableZD AAA table. SEQUENCE OF RuckusZDAAAConfigEntry .1.3.6.1.4.1.25053.1.2.2.3.1.1.1 |
ruckusZDAAAConfigEntrySpecifies each ZD AAA configuration entry. RuckusZDAAAConfigEntry .1.3.6.1.4.1.25053.1.2.2.3.1.1.1.1 |
ruckusZDAAAConfigIDAAA Directory Server ID. INTEGER .1.3.6.1.4.1.25053.1.2.2.3.1.1.1.1.1 |
ruckusZDAAAConfigNameServer name for this AAA or Directory Server. It can't be modified after creating.rw OCTET STRING .1.3.6.1.4.1.25053.1.2.2.3.1.1.1.1.2 |
ruckusZDAAAConfigServiceTypeThe Service type for this AAA or LDAP/Active Directory server. For current version,active-directory and ldap-directory are not supported(for set)rw Enumeration .1.3.6.1.4.1.25053.1.2.2.3.1.1.1.1.3 |
ruckusZDAAAConfigRowStatusRow Status ,Control of Add, Delete of the Directory Server. 1,ACTIVE state,only for read; 4,CREATEANDGO, create a new table; 6,DESTROY, delete a existing table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25053.1.2.2.3.1.1.1.1.10 |
ruckusZDAAASvrTableZD AAA Server table,including access server and account server. SEQUENCE OF RuckusZDAAASvrEntry .1.3.6.1.4.1.25053.1.2.2.3.1.1.2 |
ruckusZDAAASvrEntrySpecifies each ZD AAA Svr entry. RuckusZDAAASvrEntry .1.3.6.1.4.1.25053.1.2.2.3.1.1.2.1 |
ruckusZDAAARadiusBackupControlEnable Primary-Secondary Backup scheme for this RADIUS Server. If enable,Secondary aaa server would be used. If diable,Secondary aaa server would not be usedrw Enumeration .1.3.6.1.4.1.25053.1.2.2.3.1.1.2.1.5 |
ruckusZDAAARadiusPrimarySvrIpAddressThe IP(V4 or V6) Address choosen for this RADIUS or Directory Server.rw OCTET STRING .1.3.6.1.4.1.25053.1.2.2.3.1.1.2.1.10 |
ruckusZDAAARadiusPrimarySvrPortThe port number choosen for this RADIUS Server. for auth : the value should be : 1812; for account : the value should be : 1813.rw INTEGER .1.3.6.1.4.1.25053.1.2.2.3.1.1.2.1.11 |
ruckusZDAAARadiusPrimarySvrPasswdThe Password entered for this RADIUS Server.rw OCTET STRING .1.3.6.1.4.1.25053.1.2.2.3.1.1.2.1.12 |
ruckusZDAAARadiusSecondarySvrIpAddressThe IP(V4 or V6) Address choosen for the backup RADIUS Server.rw OCTET STRING .1.3.6.1.4.1.25053.1.2.2.3.1.1.2.1.15 |
ruckusZDAAARadiusSecondarySvrPortThe port number choosen for the backup RADIUS Server. for auth : the value should be : 1812; for account : the value should be : 1813.rw INTEGER .1.3.6.1.4.1.25053.1.2.2.3.1.1.2.1.16 |
ruckusZDAAARadiusSecondarySvrPasswdThe Password entered for the backup RADIUS Server.rw OCTET STRING .1.3.6.1.4.1.25053.1.2.2.3.1.1.2.1.17 |
ruckusZDAAARadiusFailoverTimeoutThe timeout in seconds configured for RADIUS Server Failover for the Server.rw INTEGER .1.3.6.1.4.1.25053.1.2.2.3.1.1.2.1.20 |
ruckusZDAAARadiusFailoverRetryThe number of reconnect retry configured for RADIUS Server Failover for the Server.rw INTEGER .1.3.6.1.4.1.25053.1.2.2.3.1.1.2.1.21 |
ruckusZDAAARadiusFailoverReconnectPrimaryThe number of seconds configured for RADIUS Server to reconnect to the Primary Server for the Server.rw INTEGER .1.3.6.1.4.1.25053.1.2.2.3.1.1.2.1.22 |