RUCKUS-UPGRADE-MIB
AI MIB Summary
The RUCKUS-UPGRADE-MIB provides management objects for initiating, monitoring, and controlling firmware and software image upgrades on RUCKUS wireless access points and switches. It exposes specific metrics for tracking upgrade transaction states, current image versions, and the status of the upgrade process to ensure network device consistency.
This is the software upgrade management objects.
Main OID:
ruckusUpgradeMIB.1.3.6.1.4.1.25053.1.1.5.1
15
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
15 total| Object Name |
|---|
ruckusUpgradeMIBThis is the software upgrade management objects. MODULE-IDENTITY .1.3.6.1.4.1.25053.1.1.5.1 |
ruckusUpgradeObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25053.1.1.5.1.1 |
ruckusFileTransfer OBJECT IDENTIFIER .1.3.6.1.4.1.25053.1.1.5.1.1.1 |
ruckusFileTransferMethodSpecifies the file tranfer method. ruckusFileTransferFTPUsername and ruckusFileTransferFTPPassword must be specified if FTP(2) is electedrw Enumeration .1.3.6.1.4.1.25053.1.1.5.1.1.1.1 |
ruckusFileTransferHostNameSpecifies the name of the host where the control file is residing.It is the same as 'ruckusFileTransferHostAddr' when it is a ipv4/ipv6 address. the value is ipv4 address,ipv6 address or domain name.rw DisplayString .1.3.6.1.4.1.25053.1.1.5.1.1.1.2 |
ruckusFileTransferHostAddrSpecifies the IP(V6) address of the host. This IP(V6) address shall be used when DNS resolution fails with ruckusFileTransferHostName. This node is the same as the node 'ruckusFileTransferHostName' when it is a ipv4/ipv6 address,otherwise it return NULL. The value is ipv4 address pr ipv6 address.rw OCTET STRING .1.3.6.1.4.1.25053.1.1.5.1.1.1.3 |
ruckusFileTransferControlFileNameSpecifies the name of the control file.rw DisplayString .1.3.6.1.4.1.25053.1.1.5.1.1.1.4 |
ruckusFileTransferFTPUsernameSpecifies username for FTP file transfer.rw DisplayString .1.3.6.1.4.1.25053.1.1.5.1.1.1.5 |
ruckusFileTransferFTPPasswordSpecifies password for FTP file transfer.rw DisplayString .1.3.6.1.4.1.25053.1.1.5.1.1.1.6 |
ruckusFileTransferUpgradeNowSetting this object to true(1) would cause upgrade to take place immediately. Always returns false(2) on read.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25053.1.1.5.1.1.1.7 |
ruckusFileTransferTakeEffectImmediatelySetting this object to true(1) sets a flag such that the device will reboot upon successful completion of the transfer. Reading it returns the state of that flag.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25053.1.1.5.1.1.1.8 |
ruckusAutoUpgrade OBJECT IDENTIFIER .1.3.6.1.4.1.25053.1.1.5.1.1.2 |
ruckusAutoUpgradeInitialCheckIntervalSpecifies initial check interval.rw Unsigned32 UNITS "minutes" .1.3.6.1.4.1.25053.1.1.5.1.1.2.1 |
ruckusAutoUpgradeCheckIntervalSpecifies the interval in minutes, to check if there is a new software available at the host. If the interval is zero, means that the software download is disabled.rw Unsigned32 UNITS "minutes" .1.3.6.1.4.1.25053.1.1.5.1.1.2.2 |
ruckusAutoUpgradeStatusTo enable/disable automatic upgrade capability.rw Unsigned32 .1.3.6.1.4.1.25053.1.1.5.1.1.2.3 |