RUCKUS-SZ-CONFIG-WLAN-MIB
AI MIB Summary
The RUCKUS-SZ-CONFIG-WLAN-MIB provides programmatic access to configure and retrieve operational parameters for Ruckus SmartZone wireless LAN controllers, specifically managing WLAN SSIDs, radio profiles, security policies, and access point associations.
Ruckus WLAN mib
Main OID:
ruckusSZConfigWLANMIB.1.3.6.1.4.1.25053.1.2.2.2
23
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
23 total| Object Name |
|---|
ruckusSZConfigWLANMIBRuckus WLAN mib MODULE-IDENTITY .1.3.6.1.4.1.25053.1.2.2.2 |
ruckusSZConfigWLANObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25053.1.2.2.2.1 |
ruckusSZConfigWLAN OBJECT IDENTIFIER .1.3.6.1.4.1.25053.1.2.2.2.1.1 |
ruckusSZConfigWLANTableSZ WLAN table. SEQUENCE OF RuckusSZConfigWLANEntry .1.3.6.1.4.1.25053.1.2.2.2.1.1.1 |
ruckusSZConfigWLANEntrySpecifies each SZ WLAN configuration entry. RuckusSZConfigWLANEntry .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1 |
ruckusSZConfigWLANIDthis Wireless LAN(WLAN) IDro INTEGER .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.1 |
ruckusSZConfigWLANSSIDSSID for this Wireless LAN.ro OCTET STRING .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.2 |
ruckusSZConfigWLANDescriptionDescription for this Wireless LAN.rw DisplayString .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.3 |
ruckusSZConfigWLANNameName for this Wireless LANro OCTET STRING .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.4 |
ruckusSZConfigWLANWLANServiceTypeThe the Service type for the Wireless LAN.ro Enumeration .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.8 |
ruckusSZConfigWLANAuthenticationAuthentication method choosen for this Wireless LAN.ro Enumeration .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.10 |
ruckusSZConfigWLANEncryptionEncryption method choosen for this Wireless LAN.rw Enumeration .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.12 |
ruckusSZConfigWLANWEPKeyIndexSelect the WEP key index for the WEP encryption.rw INTEGER .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.15 |
ruckusSZConfigWLANWEPKeyEnter the Pass-phrase for the WEP encryption method. Only 10 or 26 Hex character.such as: 1122334455rw OCTET STRING .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.16 |
ruckusSZConfigWLANWPACipherTypeEnter the encryption cipher method for the WPA encryption. fpr WPA2,aes is only supported.null is only for read.rw Enumeration .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.20 |
ruckusSZConfigWLANWPAKeyEnter the Pass-phrase for the WPA encryption. Specifies the WPA PSK (Wi-Fi Protected Access Pre Shared key) If the key length is 64 then all 64 characters should be in hex, otherwise the key assumed to be ascii.rw OCTET STRING .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.21 |
ruckusSZConfigWLANWirelessClientIsolationset Wireless Client Isolation, clients will be unable to communicate with each other, or access any of the restricted subnet. for Guest and webauth WLAN type, it must be 'enable'.rw Enumeration .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.28 |
ruckusSZConfigWLANZeroITActivationEnable the Zero IT Activation Service of the Wireless LAN or not.rw Enumeration .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.30 |
ruckusSZConfigWLANServicePrioritySelect the QOS service priority for the Wireless LAN.rw Enumeration .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.32 |
ruckusSZConfigWLANAccountingUpdateIntervalEnter interval in minutes to update Accounting Server.rw INTEGER .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.36 |
ruckusSZConfigWLANVlanIDSpecifies the VLAN ID of the WLAN. If VLAN ID is 1, packets from this WLAN will be untagged.rw INTEGER ( 1..4094 ) .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.45 |
ruckusSZConfigWLANHideSSIDHide SSID, not to broadcast it SSID.rw Enumeration .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.50 |
ruckusSZConfigWLANMaxClientsPerAPSelect the Number of client devices the AP can service for the Wireless LAN.rw INTEGER .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.55 |