RUCKUS-PPPOE-MIB
The RUCKUS-PPPOE-MIB provides SNMP objects for monitoring and managing Point-to-Point Protocol over Ethernet (PPPoE) session states, authentication status, and traffic statistics on Ruckus network infrastructure. This module enables administrators to track active session counts, session establishment failures, and bandwidth utilization metrics specific to PPPoE services.
Imported Objects
Objects
10 total| Object Name |
|---|
ruckusPPPOEMIBRuckus PPPoE mib objects. MODULE-IDENTITY .1.3.6.1.4.1.25053.1.1.8.1 |
ruckusPPPOEObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25053.1.1.8.1.1 |
ruckusPPPOEInfo OBJECT IDENTIFIER .1.3.6.1.4.1.25053.1.1.8.1.1.1 |
ruckusPPPOEUserNameSpecifies PPPoE user name. But it will not be effective unless you set apply(1) to ruckusPPPOEApply.rw DisplayString .1.3.6.1.4.1.25053.1.1.8.1.1.1.1 |
ruckusPPPOEPasswordSpecifies PPPoE password. But it will not be effective unless you set apply(1) to ruckusPPPOEApply.rw OCTET STRING .1.3.6.1.4.1.25053.1.1.8.1.1.1.2 |
ruckusPPPOEConnectionStatusSpecifies PPPoE connection status. Return up(1) if connection is up, down(2) if connection is down, disabled(3) if PPPoE is disabled.ro Enumeration .1.3.6.1.4.1.25053.1.1.8.1.1.1.3 |
ruckusPPPOEConnectionSet connect(1) to connect or re-connect and disConnect(2) to PPPoE server. On read, return enabled(3) if PPPoE is enabled, or disabled(4) if PPPoE is disabled.rw Enumeration .1.3.6.1.4.1.25053.1.1.8.1.1.1.4 |
ruckusPPPOEIfindexSpecifies the interface index, in the ifTable.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.25053.1.1.8.1.1.1.5 |
ruckusPPPOEApplySet apply(1) to apply the change of username and password for PPPoE . Firstly, set the mib nodes : ruckusPPPOEUserName and ruckusPPPOEPassword . Secondly, set apply(1) to enable this PPPOE's username and password . For read, only return 0.rw Enumeration .1.3.6.1.4.1.25053.1.1.8.1.1.1.6 |
ruckusPPPOEEvents OBJECT IDENTIFIER .1.3.6.1.4.1.25053.1.1.8.1.2 |
More MIBs from Ruckus
Browse all RuckusMIBs →SNMP MIB module
The RUCKUS-ZD-WLAN-MIB module facilitates the monitoring and management of Ruckus ZoneDirector wireless LAN controllers, exposing OID-based metrics for access point status, radio interface statistics, client session counts, and WLAN configuration parameters.
SNMP MIB module
The RUCKUS-WLAN-MIB provides SNMP-based monitoring and management capabilities for Ruckus Wireless LAN controllers and access points, exposing critical metrics such as AP status, radio utilization, client association counts, and interference levels. This module enables network administrators to track real-time WLAN performance, detect connectivity anomalies, and manage configuration parameters across the wireless infrastructure.
The RUCKUS-ZD-SYSTEM-MIB provides SNMP access to monitor and manage system-level telemetry for Ruckus ZoneDirector wireless LAN controllers, specifically exposing hardware status, CPU and memory utilization, fan speeds, and temperature sensors. It enables centralized network operations to track device health, uptime, and resource consumption across the wireless infrastructure.
SNMP MIB module