RUCKUS-DEVICE-MIB
Ruckus device management mib.
Main OID:
ruckusDeviceMIB.1.3.6.1.4.1.25053.1.1.4.1
43
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
43 total| Object Name |
|---|
ruckusDeviceMIBRuckus device management mib. MODULE-IDENTITY .1.3.6.1.4.1.25053.1.1.4.1 |
ruckusDeviceObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25053.1.1.4.1.1 |
ruckusDeviceInfo OBJECT IDENTIFIER .1.3.6.1.4.1.25053.1.1.4.1.1.1 |
ruckusDeviceNameSpecifies name of the device. Show the same value as model name.rw DisplayString .1.3.6.1.4.1.25053.1.1.4.1.1.1.1 |
ruckusDeviceRebootSetting this object to true(1) would cause to reboot the device. Always returns false(2) on read.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25053.1.1.4.1.1.1.2 |
ruckusDeviceRebootWithDefaultsThis allows the product to revert to factory defaults.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25053.1.1.4.1.1.1.3 |
ruckusDeviceCountryCodeSpecifies the country code. Example ISO country codes: CA,US,HK,IL,CN,JP,TW.rw RuckusCountryCode (RUCKUS-TC-MIB) .1.3.6.1.4.1.25053.1.1.4.1.1.1.4 |
ruckusDeviceGPSSpecifies GPS coordinates of the device. (e.g. 37.3881,-122.0258)rw DisplayString .1.3.6.1.4.1.25053.1.1.4.1.1.1.5 |
ruckusDeviceNEIdNE Id.rw DisplayString .1.3.6.1.4.1.25053.1.1.4.1.1.1.6 |
ruckusDeviceLocationLocation of the device. Show the intstallation position.rw DisplayString .1.3.6.1.4.1.25053.1.1.4.1.1.1.10 |
ruckusDeviceMacAddrMAC Addressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25053.1.1.4.1.1.1.11 |
ruckusDeviceIPAddrIP Addressro IpAddress .1.3.6.1.4.1.25053.1.1.4.1.1.1.12 |
ruckusDeviceTrapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.25053.1.1.4.1.1.2 |
ruckusDeviceTrapDestinationSpecifies primary trap destination IPv6 or IPv4 address.rw OCTET STRING .1.3.6.1.4.1.25053.1.1.4.1.1.2.1 |
ruckusDeviceTrapDestination2Specifies secondary trap destination IPv6 or IPv4 address.rw OCTET STRING .1.3.6.1.4.1.25053.1.1.4.1.1.2.2 |
ruckusDeviceTrapDestination3Specifies Third trap destination IPv6 or IPv4 address.rw OCTET STRING .1.3.6.1.4.1.25053.1.1.4.1.1.2.3 |
ruckusDeviceTrapDestination4Specifies forth trap destination IPv6 or IPv4 address.rw OCTET STRING .1.3.6.1.4.1.25053.1.1.4.1.1.2.4 |
ruckusDeviceTrapDestination5Specifies fifth trap destination IPv6 or IPv4 address.rw OCTET STRING .1.3.6.1.4.1.25053.1.1.4.1.1.2.5 |
ruckusDeviceTrapDestination6Specifies sixth trap destination IPv6 or IPv4 address.rw OCTET STRING .1.3.6.1.4.1.25053.1.1.4.1.1.2.6 |
ruckusDeviceTrapDestination7Specifies seventh trap destination IPv6 or IPv4 address.rw OCTET STRING .1.3.6.1.4.1.25053.1.1.4.1.1.2.7 |
ruckusDeviceTrapDestination8Specifies eighth trap destination IPv6 or IPv4 address.rw OCTET STRING .1.3.6.1.4.1.25053.1.1.4.1.1.2.8 |
ruckusDeviceTrapDestination9Specifies ninth trap destination IPv6 or IPv4 address.rw OCTET STRING .1.3.6.1.4.1.25053.1.1.4.1.1.2.9 |
ruckusDeviceTrapDestination10Specifies tenth trap destination IPv6 or IPv4 address.rw OCTET STRING .1.3.6.1.4.1.25053.1.1.4.1.1.2.10 |
ruckusDeviceIPInfo OBJECT IDENTIFIER .1.3.6.1.4.1.25053.1.1.4.1.1.3 |
ruckusDevicePrimaryDNSSpecifies primary DNS IP address.rw IpAddress .1.3.6.1.4.1.25053.1.1.4.1.1.3.1 |
ruckusDeviceSecondaryDNSSpecifies secondary DNS IP address.rw IpAddress .1.3.6.1.4.1.25053.1.1.4.1.1.3.2 |
ruckusDevicePrimaryDNSIPV6Specifies primary DNS IPV6 address.rw OCTET STRING .1.3.6.1.4.1.25053.1.1.4.1.1.3.3 |
ruckusDeviceSecondaryDNSIPV6Specifies secondary DNS IPV6 address.rw OCTET STRING .1.3.6.1.4.1.25053.1.1.4.1.1.3.4 |
ruckusDeviceWanInfo OBJECT IDENTIFIER .1.3.6.1.4.1.25053.1.1.4.1.1.4 |
ruckusDeviceWanTableSpecifies each wan table. SEQUENCE OF RuckusDeviceWanEntry .1.3.6.1.4.1.25053.1.1.4.1.1.4.1 |
ruckusDeviceWanEntrySpecifies each wan entry. RuckusDeviceWanEntry .1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1 |
ruckusDeviceWanIPAddrModeSpecifies how the wan gets its IP address. none - bridging static - Statically assigned IP address dhcp - Using DHCP protocol pppoe - Using PPPoE protocol when ipaddr mode from dhcp to static,the relative nodes should be set together , including:ruckusDeviceWanIPAddr,ruckusDeviceWanNetmask,ruckusDeviceWanGatewayrw Enumeration .1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.1 |
ruckusDeviceWanIPAddrThis is writable only if the ruckusDeviceWanIPAddrMode is set to static(2).rw IpAddress .1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.2 |
ruckusDeviceWanNameSpecifies the name of the wan interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.3 |
ruckusDeviceWanNetmaskSpecifies the ip address mask if the ruckusDeviceWanIPAddrMode is set to static(2).rw IpAddress .1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.4 |
ruckusDeviceWanGatewaySpecifies the gateway ipaddr if the ruckusDeviceWanIPAddrMode is set to static(2).rw IpAddress .1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.5 |
ruckusDeviceWanIPVersionSpecifies the system ip version,ipv4 or ipv6 or dualstack. ipv4 - only support IPV4 ipv6 - only support IPV6 dualstack - support IPV4 and IPV6rw Enumeration .1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.8 |
ruckusDeviceWanIPV6AddrModeSpecifies how the wan gets its IPV6 address. auto-configuration - auto get ipv6 address by RFC about IPV6 static - Statically assigned IPV6 address when ipv6addr mode from auto-configuration to static,the relative nodes should be set together , including:ruckusDeviceWanIPV6Addr,ruckusDeviceWanIPV6PrefixLen,ruckusDeviceWanIPV6Gatewayrw Enumeration .1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.10 |
ruckusDeviceWanIPV6AddrThis is writable only if the ruckusDeviceWanIPAddrMode is set to static(2).rw OCTET STRING .1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.11 |
ruckusDeviceWanIPV6PrefixLenSpecifies the ip v6 address prefix length if the ruckusDeviceWanIPV6AddrMode is set to static(2).rw INTEGER .1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.12 |
ruckusDeviceWanIPV6GatewaySpecifies the gateway ipv6 address if the ruckusDeviceWanIPV6AddrMode is set to static(2).rw OCTET STRING .1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.13 |
ruckusDeviceWanIPIndexInterface index.ro Unsigned32 .1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.200 |
ruckusDeviceEvents OBJECT IDENTIFIER .1.3.6.1.4.1.25053.1.1.4.1.2 |