RIVERSTONE-NOTIFICATIONS-MIB
AI MIB Summary
The RIVERSTONE-NOTIFICATIONS-MIB defines the enterprise-specific SNMP trap and inform structures for Riverstone Networks hardware, enabling the transmission of critical platform events such as interface state transitions, hardware failures, and system alerts. This module facilitates real-time monitoring of device health and operational anomalies by mapping vendor-specific conditions to standard SNMP notification mechanisms.
This module describes the set of notifications specific to the Devices from Riverstone Networks platform. This module represents the total set of enterprise notifications, some are conditionally mandatory depending on platform capabilities.
Main OID:
rsNotificationsMib.1.3.6.1.4.1.5567.2.33
33
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
33 total| Object Name |
|---|
rsNotificationsMibThis module describes the set of notifications specific to the Devices from Riverstone Networks platform. This module represents the total set of enterprise notifications, some are conditionally mandatory depending on platform capabilities. MODULE-IDENTITY .1.3.6.1.4.1.5567.2.33 |
rsNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.5567.2.33.1 |
rsNotificationControl OBJECT IDENTIFIER .1.3.6.1.4.1.5567.2.33.1.1 |
rsEnvNotificationGroup OBJECT IDENTIFIER .1.3.6.1.4.1.5567.2.33.1.2 |
rsEnvNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.5567.2.33.1.2.0 |
rsEnvirPowerSupplyFailedA power supply on the sending device has failed. The entPhysicalDescr object identifies the failed supply. NOTIFICATION-TYPE .1.3.6.1.4.1.5567.2.33.1.2.0.1 |
rsEnvirPowerSupplyRecoveredA power supply on the sending device has recovered after failure. The entPhysicalDescr object identifies the recovered supply. NOTIFICATION-TYPE .1.3.6.1.4.1.5567.2.33.1.2.0.2 |
rsEnvirFanFailedA Fan tray on the sending device has failed. The entPhysicalDescr object identifies the failed fan tray. NOTIFICATION-TYPE .1.3.6.1.4.1.5567.2.33.1.2.0.3 |
rsEnvirFanRecoveredA Fan tray on the sending device has recovered after failure. The entPhysicalDescr object identifies the recovered Fan tray. NOTIFICATION-TYPE .1.3.6.1.4.1.5567.2.33.1.2.0.4 |
rsEnvirTempExceededA temperature inside the chassis on the sending device has exceeded normal operating temperature. The entPhysicalDescr object identifies the module that has the temperature sensor. NOTIFICATION-TYPE .1.3.6.1.4.1.5567.2.33.1.2.0.5 |
rsEnvirTempNormalA temperature inside the chassis on the sending device has returned to normal operating temperature. The entPhysicalDescr object identifies the module that has the temperature sensor. NOTIFICATION-TYPE .1.3.6.1.4.1.5567.2.33.1.2.0.6 |
rsEnvirHotSwapInA module has been inserted into the chassis. The object entPhysicalDescr identifies the module. The module can be a card for the main bay or a switching fabric in the switching fabric bay. NOTIFICATION-TYPE .1.3.6.1.4.1.5567.2.33.1.2.0.7 |
rsEnvirHotSwapOutA module has been turned off or removed from the chassis. The object entPhysicalDescr identifies the module. The module can be a card for the main bay or a switching fabric in the switching fabric. NOTIFICATION-TYPE .1.3.6.1.4.1.5567.2.33.1.2.0.8 |
rsEnvirBackupControlModuleOnlineA backup control module that was in standby mode has taken over for a failed primary control module. The objec entPhysicalDescr identifies the now active control module. NOTIFICATION-TYPE .1.3.6.1.4.1.5567.2.33.1.2.0.9 |
rsEnvirSwitchingFabricFailureThe primary switching fabric that was in standby mode has failed. The object entPhysicalDescr identifies the failed switching fabric. If there is a backup switching fabric and if it comes up ok, rsEnvirSwitchingFabricFailover would be sent after this one. NOTIFICATION-TYPE .1.3.6.1.4.1.5567.2.33.1.2.0.10 |
rsEnvirSwitchingFabricFailoverA backup switching fabric that was in standby mode has taken over for a failed primary switching fabric. The object entPhysicalDescr identifies the now active switching fabric. This would be sent after sending rsEnvirSwitchingFabricFailure. NOTIFICATION-TYPE .1.3.6.1.4.1.5567.2.33.1.2.0.11 |
rsEnvirTempTooLowA temperature inside the chassis on the sending device has fallen below normal operating temperature. The entPhysicalDescr object identifies the module that has the temperature sensor. NOTIFICATION-TYPE .1.3.6.1.4.1.5567.2.33.1.2.0.12 |
rsSyslog2SNMPMapGroup OBJECT IDENTIFIER .1.3.6.1.4.1.5567.2.33.1.3 |
rsSyslog2SNMPMapNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.5567.2.33.1.3.0 |
rsSyslog2SNMPMapA backup control module that was in standby mode has taken over for a failed primary control module. The objec entPhysicalDescr identifies the now active control module. NOTIFICATION-TYPE .1.3.6.1.4.1.5567.2.33.1.3.0.1 |
rsS2SModuleIdName of the software module that is generating this syslog message.ro DisplayString .1.3.6.1.4.1.5567.2.33.1.3.1 |
rsS2SSeveritySeverity of the event that caused the syslog message to be generated.ro Enumeration .1.3.6.1.4.1.5567.2.33.1.3.2 |
rsS2SMessageText message describing the event that resulted in the syslog message being generated. Any instance identifiers will be embedded in this message text.ro DisplayString .1.3.6.1.4.1.5567.2.33.1.3.3 |
rsNotificationConformance OBJECT IDENTIFIER .1.3.6.1.4.1.5567.2.33.2 |
rsNotificationCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.5567.2.33.2.1 |
rsNotificationComplianceV10The compliance statement for the RIVERSTONE-NOTIFICATIONS-MIB.obsolete Unknown .1.3.6.1.4.1.5567.2.33.2.1.1 |
rsNotificationComplianceV11Add compliance that includes the two new notifications. Unknown .1.3.6.1.4.1.5567.2.33.2.1.2 |
rsNotificationComplianceV12Add compliance that includes the two new notifications. Unknown .1.3.6.1.4.1.5567.2.33.2.1.3 |
rsEnvNotificationConfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.5567.2.33.2.2 |
rsNotificationConfGroupV10A base set of notifications for chassis based devices. Unknown .1.3.6.1.4.1.5567.2.33.2.2.1 |
rsNotificationSwitchingFabricA set of switching fabric notifications. Unknown .1.3.6.1.4.1.5567.2.33.2.2.2 |
rsS2SNotificationConfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.5567.2.33.2.3 |
rsNotificationSyslog2SNMPMapA notification to map syslog message to SNMP. Unknown .1.3.6.1.4.1.5567.2.33.2.3.1 |