RIVERSTONE-CMTS-MIB
Imported Objects
Objects
16 total| Object Name |
|---|
rsCmtsMibThis mib module defines the Riverstone Networks enterpise MIB for
CMTS modules.
http://www.riverstonenet.com/products.
Copyright (C) Riverstone Networks, Inc 2000 MODULE-IDENTITY .1.3.6.1.4.1.5567.2.11 |
rsCmtsBaseTableCMTS Base table settable parameters. SEQUENCE OF RsCmtsBaseEntry .1.3.6.1.4.1.5567.2.11.1 |
rsCmtsBaseEntryAn entry containing objects describing attributes of each
MAC entry, extending the information in ifEntry.
An entry in this table exists for each ifEntry with an
ifType of docsCableMaclayer(127). RsCmtsBaseEntry .1.3.6.1.4.1.5567.2.11.1.1 |
rsCmtsBaseBpduFilterIndicates whether we do BPDU filtering on the headend.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5567.2.11.1.1.2 |
rsCmtsBaseBpduFilterHitsCounts number of BPDU filter hits on the headend.ro Counter32 .1.3.6.1.4.1.5567.2.11.1.1.3 |
rsCmtsBaseNonIPFilterIndicates whether we do non-IP filtering on the headend.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5567.2.11.1.1.4 |
rsCmtsBaseNonIPFilterHitsCounts number of non-IP filter hits on the headend.ro Counter32 .1.3.6.1.4.1.5567.2.11.1.1.5 |
rsCmtsBaseMapLengthLength of the generated maps in microseconds.rw Integer32 .1.3.6.1.4.1.5567.2.11.1.1.6 |
rsCmtsBaseMapLeadTimeThe amount of time between when we send a map and
its effective start time in microseconds.rw Integer32 .1.3.6.1.4.1.5567.2.11.1.1.7 |
rsCmtsBaseInitMaintLengthThe length of the initial maintenance interval in microseconds.rw Integer32 .1.3.6.1.4.1.5567.2.11.1.1.8 |
rsCmtsBase3137Config13137 configuration register 1.rw Integer32 .1.3.6.1.4.1.5567.2.11.1.1.9 |
rsCmtsBase3137Config23137 configuration register 2.rw Integer32 .1.3.6.1.4.1.5567.2.11.1.1.10 |
rsCmtsBaseConcatenationIndicates whether we do Concatenation on the headend.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5567.2.11.1.1.11 |
rsCmtsBaseBpiHwAssistIndicates whether we do key generation in hardware.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5567.2.11.1.1.12 |
rsCmtsBaseGenericCmdA generic command to be applied to the active or startup
configuration. The string is not to exceed 255 alpha-numeric
characters. To write or check the status of the command, use
the variable rsCmtsBaseGenericCmdStatus.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5567.2.11.1.1.13 |
rsCmtsBaseGenericCmdStatusThis variable is used to write the command in rsCmtsBaseGenericCmd
to either the active or startup configuration file. It is also
useful to determine if the command is written successfully. These
are the codes of the status:
undefined(0)
active(1)
startup(2)
process(3)
success(4)
failed(5)
::= { rsCmtsBaseEntry 14 }
rsCmtsBaseUccRetryInterval OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTIONrw RsCmtsCmdStatus .rsCmtsCompliances.1 |
More MIBs from Riverstone
Browse all RiverstoneMIBs →The RIVERSTONE-RATELIMIT-MIB enables monitoring and configuration of traffic rate-limiting policies and associated counters on Riverstone Networks hardware appliances. It provides visibility into bandwidth throttling thresholds, packet drop statistics, and policy enforcement states for ingress and egress traffic shaping.
The RIVERSTONE-LFAP-MIB manages Riverstone Networks flow accounting by monitoring Connection Control Entity (CCE) states, configuring Flow Accounting Service (FAS) agents and external servers, and tracking per-FAS traffic statistics.
The RIVERSTONE-CONFIG-MIB provides an SNMP interface for retrieving and modifying configuration files on Riverstone (now Fortinet) network routers. It enables programmatic access to device settings, including routing protocols, interface parameters, and security policies, facilitating centralized configuration management and audit compliance.
The RIVERSTONE-VLAN-EXTENSIONS-MIB extends the standard qBridgeMIB to monitor and manage vendor-specific VLAN attributes and bridge port configurations on Riverstone Networks hardware. It provides granular visibility into VLAN tagging, filtering, and port membership states that are not covered by the base RFC 2674 specification.
SNMP MIB module
SNMP MIB module