Home/Catalog/RETIX-SWITCHSTAKII-MIB

RETIX-SWITCHSTAKII-MIB

Name: SNMP MIBs and OID Database
Creator: Quadrata FZCO
License: https://opensource.org/licenses/MIT

AI MIB Summary

Standard SNMP MIB module defining data structures for RETIX-SWITCHSTAKII-MIB.

Objects

Active

Status

Dependencies

Imported Objects

RFC1158-MIB

RFC-1212

Objects

24 total

Object Name	Syntax	OID
retix OBJECT IDENTIFIER `.1.3.6.1.4.1.72`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.72`
RFC1158-MIB Unknown `.1.3.6.1.4.1.72`	Unknown	`.1.3.6.1.4.1.72`
switchStakII OBJECT IDENTIFIER `.1.3.6.1.4.1.72.20`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.72.20`
unitProfile OBJECT IDENTIFIER `.1.3.6.1.4.1.72.20.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.72.20.1`
baseModuleIdentifies the type of main PCB installed.ro Enumeration `.1.3.6.1.4.1.72.20.1.1`	Enumeration	`.1.3.6.1.4.1.72.20.1.1`
io1ModuleIdentifies the type of card installed in the IO1 connectorro Enumeration `.1.3.6.1.4.1.72.20.1.2`	Enumeration	`.1.3.6.1.4.1.72.20.1.2`
io2ModuleIdentifies the type of card installed in the IO2 connectorro Enumeration `.1.3.6.1.4.1.72.20.1.3`	Enumeration	`.1.3.6.1.4.1.72.20.1.3`
baseUnit OBJECT IDENTIFIER `.1.3.6.1.4.1.72.20.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.72.20.2`
baseBootFirmwareVersionVersion number of current boot firmware in decimal, (i.e. V01.00 is displayed as 256)ro INTEGER `.1.3.6.1.4.1.72.20.2.1`	INTEGER	`.1.3.6.1.4.1.72.20.2.1`
baseSoftwareVersionVersion number of current software in decimal, (i.e. V01.03 is displayed as 259)ro INTEGER `.1.3.6.1.4.1.72.20.2.2`	INTEGER	`.1.3.6.1.4.1.72.20.2.2`
baseErrorLogA stored value indicating that the unit has experienced a fault. Log information is formatted as a four digit hex number. Set to zero to clear the logged fault. Record this value and call Retix technical support.rw INTEGER `.1.3.6.1.4.1.72.20.2.3`	INTEGER	`.1.3.6.1.4.1.72.20.2.3`
stakbus OBJECT IDENTIFIER `.1.3.6.1.4.1.72.20.3`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.72.20.3`
stkbusIOPortRepresents the IO port containing a StakbusII card. Only one Stakbus card is permitted per unitro Enumeration `.1.3.6.1.4.1.72.20.3.1`	Enumeration	`.1.3.6.1.4.1.72.20.3.1`
stkbusSpeedSpeed in Mbps of the installed Stakbus (StakbusII = 175Mbps).ro INTEGER `.1.3.6.1.4.1.72.20.3.2`	INTEGER	`.1.3.6.1.4.1.72.20.3.2`
stkbusNodeAddressAddress of the Stakbus interface as set on front panel dial (0..15).ro INTEGER `.1.3.6.1.4.1.72.20.3.3`	INTEGER	`.1.3.6.1.4.1.72.20.3.3`
stkbusRingOperationalStatusThe status of the Retix Stakbus interface ring.ro Enumeration `.1.3.6.1.4.1.72.20.3.4`	Enumeration	`.1.3.6.1.4.1.72.20.3.4`
vlan OBJECT IDENTIFIER `.1.3.6.1.4.1.72.20.4`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.72.20.4`
vlanConfig OBJECT IDENTIFIER `.1.3.6.1.4.1.72.20.4.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.72.20.4.1`
vlanEnableDisableEnables or Disables VLAN operation on this unit.rw Enumeration `.1.3.6.1.4.1.72.20.4.1.1`	Enumeration	`.1.3.6.1.4.1.72.20.4.1.1`
portVLANTableTable of port based VLAN configurations. Entries (rows) are added to the table by issuing a SET command with the EnableAdd value for the portVLANEntryEdit object. The new row is created using the instantiations. SEQUENCE OF PortVLANEntry `.1.3.6.1.4.1.72.20.4.1.2`	SEQUENCE OF PortVLANEntry	`.1.3.6.1.4.1.72.20.4.1.2`
portVLANEntryThis is an entry in the portVLANTable. PortVLANEntry `.1.3.6.1.4.1.72.20.4.1.2.1`	PortVLANEntry	`.1.3.6.1.4.1.72.20.4.1.2.1`
portVLANEntryPortIDPort number for this VLAN configuration.rw INTEGER `.1.3.6.1.4.1.72.20.4.1.2.1.1`	INTEGER	`.1.3.6.1.4.1.72.20.4.1.2.1.1`
portVLANEntryVLANIDVLAN number or ID.rw INTEGER `.1.3.6.1.4.1.72.20.4.1.2.1.2`	INTEGER	`.1.3.6.1.4.1.72.20.4.1.2.1.2`
portVLANEntryEditWhen set to enableAdd(1) the instantiations will be used to create a new table entry (row). Existing entries can be disabled(2) or deleted (3).rw Enumeration `.1.3.6.1.4.1.72.20.4.1.2.1.3`	Enumeration	`.1.3.6.1.4.1.72.20.4.1.2.1.3`